7V系列电磁阀安装使用注意事项

Fluid Control Division Global Marketing Update High Flow Valve Actuation SeriesGlobal Marketing Update No. 134, June 14, 2007 __________________________________________________________________________________________________________________________________ Parker Fluid ControlDivision is continually expanding its Valve Actuation product portfolio to meet the ever increasing demands of the process industry. Our goal is to provide the highest quality feature enhanced portfolio to the actuation segment of the process industry.We are pleased to introduce our new Series of High Flow direct mount NAMUR solenoid valves for the Process and Industrial markets. The High Flow Series complements our highly successful specification grade 7300 Series product line. The High Flow product line provides new, cost effective solutions for general purpose customer application needs.Attachments and EnclosuresI Catalog BrochureII List Price SheetIII Installation, Operation andMaintenanceInstructionsIV Competitive FeatureComparisonV CompetitiveCross-Reference ValveListing PRODUCT FEATURESThe High Flow Series is a NAMUR interfaceinternal pilot spool valve for direct mounting toactuators. The NAMUR mount spool valve isavailable for either 3/2 normally closed valveor 5/2 four-way functionality.The axial valve construction allowsa low profile or in-line operatororientation with valve body valve style.The portfolio consists of 1/4” ported single and dual solenoid valves (Cv = 1.2) and a larger high flow 1/2” ported valve (Cv = 3.0) meeting a wide variety of application requirements. (Reference catalog pages and construction reference drawings)The valve body is a hard anodized aluminum. The standard pressure vessel end cap is made of an engineered thermoplastic.The primary valve characteristic is a patented “swimming” o-ring sealing system that increases sealing force as pressure increases thereby minimizing stiction potential at lower pressures. The valve series incorporates numerous other benefits including: •Utilizing a combined pneumatic and spring return for standard fail-safe operation in case of power failure.•The valves are equipped with a standard locking manual override.•The valve uses a “bug screen” nut exhausting the pilot section of the valve to atmosphere for safe outdoor service.•Mounting plates are available for use with the hazardous coils.The spool valve design uses a low power coil for reduced energy consumption and computer base control. DIN, conduit and hazardous coils complete the electrical portfolio.Global Marketing Update No. 134, June 14, 2007 __________________________________________________________________________________________________________________________________ OPERATION FUNCTIONALITY3/2 Single Solenoid (4 ported, 2 position)NAMUR valve, solenoid operated, for 3-way normally closed operation. In case of an electrical or air failure, valve returns to a fail-safe position through pneumatic and assisted spring return.5/2 Single Solenoid (5 ported, 2 position)NAMUR valve solenoid operated, for 4-way, 2 position operation. In case of an electrical or air failure, valve returns to a fail-safe position through pneumatic and assisted spring return.5/2 Dual Solenoid (5 ported, 2 position)NAMUR valve used for 4-way, 2-position operation. In case of an electrical or air failure, valve “fails as is”. Therefore, valve remains in last position upon failure and will not return to a predetermined position.5/3 Dual Solenoid, Center Position Closed (5 ported, 2 position)NAMUR valve used for 4-way, 2-position operation. In case of an electrical or air failure, the spool returns to the center position thereby removing pressure to the cylinder ports.TECHNICAL PRODUCT CHARACTERISTICSThe new line of valve actuation products offer many features and benefits as follows:Modular construction – Facilitates use of various body configurations and coil options.Mounting Configurations - Direct mount NAMUR pattern with axial operator orientation for single and dual solenoid models for low profile mounting requirements.Manual Override – Standard on all models for manual valve operation during start-up and diagnostic procedures.7mm (1.2Cv ) and 12mm (3.0 Cv) orifice sizes – Multiple sizes to meet various application demands to ensure the solenoid valve is properly sized.Body Materials - Lightweight anodized aluminum.Spool Design – Stainless steel with NBR sealing materials.Exhaust Pilot Cap– Protected pilot sleeve exhaust using “Bug Screen” nut. Helps protect against plugging, dirt, and insects, etc.Ratings – Meets pressures up to 150 psi.Ambient Temperatures – From 14°F (-10°C) to 122°F (50°C), serving most temperature environments. Fluid Temperatures – From 32°F (0°C) to 104°F (40°C).COIL PRODUCT CHARACTERISTICSA selection of low power encapsulated coils as follows:•DIN coil - with 3-pin DIN 43650 type B plug.•Conduit - 3-wire coil.•Hazardous – 3-wire coil with FM and CSA agency approvals meeting Class 1, Groups A,B,C,D and Class II, Groups E,F,G. Meets EEx m II T4 Division 1 requirements.NAMUR INTERFACEMany actuator manufacturers utilize a common mounting pattern referred to as a NAMUR interface for mounting configurations of solenoid valves.The actuator interface dimensions for NAMUR mounting of the pilot valve to the actuator is shown below (dimensions in millimeters).MATERIALS OF CONSTRUCTIONBody: Anodized AluminumEnd Covers: Thermoplastic – Glass-Filled Polyamid 6/6Plunger: 430 Stainless SteelCore Tube: 304 Stainless SteelSteelSprings: StainlessSeals: NBRCages: Polyamide Filled ThermoplasticSteelSpool: StainlessShading Rings: CopperMOUNTING BOLTSThe standard NAMUR interface includes (2) mounting bolts to mount the valve on to the actuator, a positioning stud and two O-rings seals.MOUNTING PLATESDue to the increased width of the hazardous coil to comply with FM and CSA certifications, a mounting plate must be installed as shown in the photograph.The mounting plate kit contains the plate, 2 o-rings, and 2 longer mounting screws.For the ¼” port valve, order kit N60001. For the ½ “ port valve, order kit N60002.ElectricalStandard voltages and voltage code:VOLTAGE CODE 12VDC A 24VDC B 120/60 C 240/60 D 24/60 E 120/50-60 F 240/50-60 GSolenoid Coil SpecificationsThe electrical portfolio is comprised of general purpose class F DIN coil per 43650B and conduit class H coils rated for NEMA classification Types, 1, 2, 3, 3S, 4, 4X. In addition, the hazardous location class H coil is rated for NEMA classification Types 7 and 9; Class I, Divisions 1 and 2, Groups A,B,C,D and Class II, Division 1, Groups E,F,G. The coils are rated for continuous duty application demands.The electrical selector table summarizes each coil specification:Coil Type Coil Part Number Class Protection Construction Agency22mm DINND1x F DIN connector needed for IP65 protection Per DIN 43650B epoxy moldedUL,CSA Conduit –Ordinary locationNC1x H Type 1,2,3,3S,4,4X Epoxy molded, ½ inch NPT conduit None Conduit –Hazardous locationNH1xHType 4X,7,9½ inch NPT conduitCSA,FMCOMPETITIVE FEATURES AND BENEFITSThe primary valve characteristic is a patented “swimming” o-ring sealing system that increases sealing force as pressure increases thereby minimizing stiction potential at lower pressures.The diagram shows a typical cross section view of the valve.valve-head to keep moisture out in brass or in stainless steel available on request, only in combination with alu-head Spool in stainless steel, other inner-parts made from brass, NBR, POM stainless steel Fiber-enforced PA-head, aluminium-version on request 360° turnable,Date CodePRODUCT LABELINGValves are sold in either:• A modular format ordering pressure vessel and coil separately. • Fully assembled with coil assembled to pressure vessel.In either case, the pressure vessel valve body provides the valve identification information defining the valve part number, performance rating and date code. Sample pressure vessel markingCoils will be marked with the appropriate part number, voltage and wattage, and agency information.Sample coil markingAll valves will be packaged with an installation, operation and maintenance instruction sheet indicating conformity with the CE Mark.ORDERING INFORMATIONPRODUCT OFFERINGReference the enclosed catalog brochure (Attachment I) describing the High Flow Series product offering. The catalog pages describe the valve features, general specifications, valve and electrical selection guide, dimensional drawings, and ordering information.PRICINGPressure Vessel list prices for the High Flow NAMUR Series valves are shown in Attachment II. ORDERING INFORMATIONThe Series uses a simple valve number to identify each model. The valves are available fully assembled or in modular form allowing application flexibility in electrical selection. The electrical parts can also be purchased in modular form.Reference the enclosed catalog pages.•When purchasing individual pressure vessels, select the pressure vessel shown on the catalog page and associated list price.•When ordering electrical parts, select the electrical part and associated list price for standard voltages.•When ordering complete valves, add the list price of each component to determine the complete list price for the fully assemble valve selected.The voltage code is the last character of the fully assembled valve or electrical part selected. For example, selecting a single solenoid, 5/2 configuration, 120/60 DIN coil, the complete valve number is:U341N03 + ND1FAVAILABILITY AND DELIVERYParker Fluid Control Division plans to maintain an appropriate service level of finished goods stock to meet business demand of the following NAMUR mount valves. If finished goods stock is available, units will be shipped within 5 business days from receipt of order for order quantities of 25 units or fewer:Product Class 1 Items:U331N03U341N03ND1B, ND1F, ND1G - 24vdc, 120vac, 240vacNC1B, NC1F, NC1G - 24vdc, 120vac, 240vacNH1B, NH1F, NH1G - 24vdc, 120vac, 240vacProduct Class 4 Items - the estimated lead-time (subject to change) is 4 weeks from receipt of order.U347N03U342N03U331N04U341N04ND1A - 12vdcNC1A - 12vdcNH1A - 12vdcAs always, for larger customer orders requiring shorter lead-times, Parker Fluid Control Division will work jointly with each customer by establishing finished goods items to meet customer provided forecasts.DISCOUNTSParker Fluid Control Division’s standard published discounts apply. Current terms and conditions apply for the product.SERVICERETURNSParker Fluid Control Division’s standard return policy applies.REPAIR PARTSParker Fluid Control Division is NOT offering component repair kits for field service at this time. Since the valve is a small, cost effective product, industry experience shows the process markets will replace the complete valve rather than rebuild the valve in the field.INSTALLATION OPERATION AND MAINTENANCE (IOM)An IOM has been created describing valve operation, installation and mounting instructions, maintenance, and troubleshooting procedures for the high flow Series NAMUR valves. Reference Attachment III, IOM HN01.WARRANTYParker Skinner’s standard 2 year warranty policy applies to the pressure vessel, coil and enclosures.PROMOTIONPromotional materials have been prepared to expedite introduction into the market place.CATALOG / LITERATURE• A new catalog has been created containing the features, specifications and outline drawings of the high flow Series valves.• A product launch announcement containing product introduction materials and detailed competitor information will be distributed to each Territory Sales Manager.TRAINING•Each Territory Sales Manager should contact their respective Fluid Control Division Authorized Distributor and Valve Actuation Accounts to arrange training.•The new high flow Series valves will be included in Fluid Control Division’s Valve Actuation Training Program.•Samples of the new high flow Series actuation valves will be provided upon receipt with a complete sample request form following standard Skinner Valve ™ sample procedures.PHASE-OUT OF 2340, 3300 and 7341 Series Product LinesThe introduction of the new product line has resulted in significant product overlap with the 2340, 3300 and 7341 series valves. Therefore, we are taking the following actions to phase out these product lines. Due to the low volume of many of the products, the old families will be replaced by the new High Flow NAMUR valve as follows:The Phase In – Phase Out schedule will begin upon introduction of the new High Flow NAMUR valve. It may be possible to order a specific older model until current inventory is fully depleted at which time the old product will no longer be available. Parker reserves the right to discontinue the old products sooner if conditions warrant.COMPETITIVE REVIEWReference Competitive Feature Comparison of select valves in Attachment IV. The attachment contains a broad selection of valves representative of the competitive offering.Attachment V provides a competitive cross-reference part number listing based on available information for the individual competitors.ASCO is considered the market leader for actuation valves. Other primary competitors include Versa, Automatic, and Herion.Below is a general description of the competitive product offerings.ASCOThe ASCO 8551 Series offers a product line of NAMUR and pipe mount versions. The portfolio consists of pad mount valves with various operator configurations with single and dual solenoids.In general, the ASCO 8551 Series consists of:•Anodized aluminum and stainless steel body using resilient spool construction. •Convertible 3-way and 4-way models based on the newer version. The older version consists of non-convertible 3-way and 4-way models that are similar to the 7300 Series. •20/35 to 150 psi operating pressure differential.•Single and dual solenoid, vertical and axial operator models available.•Cv 0.50 to 0.86.•AC versions from 2.5 watts to 10.1 watts.DC versions from 3.0 watts to 11.6 watts.•DIN, watertight and explosion solenoids available based on model.The Parker High Flow Series NAMUR mount valves are specified to meet the application requirement. A conversion or mounting plate is not required when using a DIN coil. The valve mounts directly to the actuator in a very cost-effective and efficient manner.VersaVersa offers a series of valves for process control markets including applications for pneumatic actuators and 316 stainless valves for corrosive requirements. The valve offering consists of NAMUR, body ported, lockout valves, latching and manual reset valves and redundant solenoid valves.Specific to the actuation area, Versa offers a convertible 3-way / 4-way version and direct acting 3-way pad mount valve. Available options include Intrinsically Safe, Low power and CENELEC flameproof enclosures.•3/2, 5/2 port plug versions. Valves field convertible by relocating a port plug converting from 3-way to 4-way or 4-way to 3-way.•Anodized aluminum, stainless steel and brass body using resilient spool construction. •Single and dual solenoid models (5/2) and dual solenoid centered position (5/3) with standard manual override.•15 to 115 psi operating pressure, Cv 0.75.•DIN, conduit and explosion solenoids available based on model.•8.5 watt AC, 10.5 watt DC.•Class A or F insulation.Automatic Valve Co. (AVC)They are considered the low price player in the market. They offer a NAMUR mount COMPACT Series. The series has limited options, but offers the ability to order valves with the solenoid on the left or right side.•3/2, 5/2 port plug versions, 1/4” npt porting only.•Anodized aluminum body using resilient spool construction.•40 to 150 psi operating pressure differential, Cv 1.0.•NEMA 4 and 7 solenoids, remote air and manual operators.•DIN, conduit and explosion solenoids available based on model, coil ratings to Class H. Herion•3/2, 5/2 port plug versions, NAMUR mount, 1/8” NPT, ¼” NPT, ½” NPT.•Anodized aluminum body using resilient spool construction.•25 to 150 psi operating pressure differential, Cv 1.1 to 1.4.•NEMA 4 and 7 solenoids, manual operators.•Low power coils available at reduced ratings.•DIN, conduit and explosion solenoids available based on models.•Locking and momentary manual override available.•Requires spacer plate for hazardous coil.Max-Air TechnologyU.S. division of M Technology Srl located in Italy. Also offer rack & pinion actuators and position indicators and mechanical switches that can be assembled as a complete unit.•3/2, 5/2 port plug versions, 1/4” npt porting only.•Epoxy coated aluminum body with plated spool. And standard manual override.•DIN and explosion solenoids available based on model, Class F standard, Class H optional. •Uses a pop-up air indicator located in pilot section to indicate if the solenoid valve is pressurized.•Optional IS and ATEX DIN coil construction.Q&A SESSIONQ? Why did we introduce the High Flow NAMUR Series valve product line?The principle reason for introducing the valve line is to meet increasing market demands for smaller, cost effective valve models for the process valve actuation markets. The Parker 7300 Series valve line offers a high-end specification grade product in multiple bodymaterials to meet general purpose ordinary requirements to the most stringent application requirements. Also, the 2340 series of aluminum body valves lacked a suitable hazardous coil limiting application potentials.The new product line overcomes the 2340 series deficiencies at a most competitive price for general purpose application requirements. The portfolio includes expanded models with higher flow factors for larger actuator designs. The new line includes a 1/2” namur valve to accommodate the trend toward larger actuators and higher flows.Finally, we’re continuing our strategic thrust in the process markets with a new product offering and responding to competitive product positions.Q? Will the High Flow Series product line replace the 2340 Series and 3300 Series valves?In a word, yes. First, since the introduction of the 2340 series and 3300 series valves(dating back to the late ‘90’s), many changes have taken place in the market. The general purpose ordinary location market generally does not require the high technical or safety standards found in these product lines. Due to deficiencies in the former product lines, specifically the lack of a hazardous coil, we were not able to meet the availability and price competitiveness. The current product lines are focused toward higher technicalrequirements resulting in low-volume market segments and overlap price-wise with the 7300 Series valve lines. To reduce complexity and offer a simplified, cost-effective processactuation valve line, the 2340 catalog portfolio will (eventually) be phased-out.Q? Describe the comparison to the 7300 product line.The High Flow Series offers similar product features and benefits compared to the 7300 Series, in particular:• Total modularity.•Interchangeable electrical parts.•Unique spool designs to eliminate risk of sticking.•High quality in proven valve designs.•Standard manual override.The distinctive features of the High Flow Series compared to the 7300 Series include:• Smaller physical size.•More cost effective compared to 7300 with manual override (for certain type application needs).Q? Where must the 7300 series valves be used versus the new line?The 7300 series contains features, multiple operator configurations and electrical coilsappropriate for more demanding critical applications including:•Higher flows appropriate for higher actuator torque specifications.•Intrinsically Safe (IS) and ultra low power environmental conditions.•Manual reset options used as a safety device on solenoid valves to prevent process resumption without manually resetting each valve.•Low temperatures application demands of –40°F/C.•Field convertible manual overrides including locking and momentary requirements. Q? Will a conversion plate eventually become available?The product line contains individual 3-way and 4-way valve configuration. When utilizing a DIN coil, this method provides the most cost-effective, competitive solution. Granted, whilea conversion plate offers the benefit of using one style valve, it also adds significant andunnecessary costs. Since the valve is focused and priced to pursue higher volumerequirements, the valve functionality will be known.。

1关于本文件本文件介绍了软启动/快排阀的用途。

本文件还包含安全相关系统内产品的使用信息（符合 IEC61508 标准的安全手册）。

1.1目标人群该文件面向安装及运行该产品的人员。

它还面向被委托负责安全相关系统内产品的规划和应用人员。

1.2适用文件–保护盖（作为防篡改保护）MS6/9-SV-C-MK/MH 装配说明书1.3指定标准2安全2.1安全注意事项–仅在原装状态下使用产品，请勿擅自进行改动。

–请仅在技术状态完好的情况下使用本产品。

–请注意产品上的各种标识。

–请注意使用场所的环境条件。

–在产品上作业前：关断电源，并做好防重启保护。

–遵守紧固扭矩。

如果没有特别说明，则公差为 ±20%。

–按规定，仅使用压缩空气作为工作介质 è12技术参数。

2.2按规定使用本产品用于安装在机器或者自动化技术设备内，且只能在符合下列条件时使用：–在工业领域内–在未经擅自改动的原始状态下–在安全相关系统内，且必须配备保护盖 MS6-SV-C-MK 作为防篡改保护–在技术性能完好的状态下2.3可预见的错误使用可预见的错误使用包括：–在户外使用–不考虑安全功能–在进气和排气方向逆转的可逆运行中使用–在 EN61511 规定的“Low Demand Mode”中使用–真空运行2.4专业人员的资质关于产品的一切工作仅允许由具备资质的专业人员进行，这些专业人员对工作进行评估并识别出危险。

专业人员拥有处理电气气动控制技术的知识和经验。

3其他信息–技术问题请联系当地 Festo 联络人 è.–附件 è/catalogue.4产品概况4.1产品配置插图 1:操作部件和接口4.2产品派生型4.3功能电控软启动/快排阀 MS6(N)-SV-...-C 实现了在工业气动管路系统和工业终端设备中的安全排气和压力建立。

4.4功能安全相关信息4.4.1可达到的安全等级本产品符合 EN ISO 13849-1 标准，适合用作安全相关系统内性能等级 (PL) c 至 1 类的元件。

电磁阀安装指南范文电磁阀是一种常见的控制阀门，广泛应用于自动化控制系统中。

在进行电磁阀的安装过程中，需要注意一些细节，以确保其正常运行和安全使用。

以下是电磁阀安装的一些建议和指南。

1.安装前准备在安装电磁阀之前，首先要确保工作环境符合要求。

要检查管道系统是否完整、无漏水、无杂质，并确认电磁阀与管道系统之间的连接方式（内螺纹、外螺纹或法兰连接）。

2.安装位置选择电磁阀的安装位置应满足以下条件：-便于观察和操作-便于保养和维修-远离有害物质和高温区域-避免震动和冲击-安全可靠，无倾斜或摇晃现象3.安装方向确定电磁阀通常有特定的流体流动方向，连接时要按照箭头指示进行连接，确保流体流经阀门时能顺畅流通。

4.密封垫安装在安装法兰电磁阀时，需要在法兰中间加上密封垫，以确保连接处的密封性能。

这样可以防止漏气或漏油，并保证系统的正常运行。

5.引导管安装6.管路支撑为了避免电磁阀因管道振动或自身重量而受到损坏，需要在适当的位置安装管道支撑装置。

这些支撑装置可以确保管道和阀门之间的紧密连接，并保证其稳定性和安全性。

7.电磁阀连接电磁阀的连接方式有多种，如螺纹连接、焊接连接和法兰连接等。

在安装电磁阀时，需要根据具体情况来选择合适的连接方式，并确保连接牢固可靠，不易松动或泄漏。

8.电气连接安装电磁阀时，还需要进行电气连接。

首先需要确认电源电压和电磁阀的匹配情况，然后按照接线图进行接线。

在接线过程中，要确保电源接线端子和电磁阀的连接牢固，以免发生短路或火灾等事故。

9.试运行和检查在安装完成后，需要进行试运行和检查，以确保电磁阀的正常工作和安全运行。

在试运行时，注意观察电磁阀是否能快速响应开关信号，并检查电磁阀的密封性能和流通性能是否良好。

总结电磁阀的安装是一个关键的环节，直接影响到其正常运行和使用寿命。

在进行安装前，要仔细查阅产品说明书和安装手册，了解相关要求和注意事项。

正确安装电磁阀可以提高控制系统的安全性和可靠性，确保系统的正常运行。

特点唯特利769系列雨淋阀以强度高、重量轻的球墨铸铁阀体为其鲜明特色，带气动、液动或电动执行机构。

全通经阀体设计提供绝佳的流动性能和较低的压降。

它还提供进入全部内部零件的简便通道，方便维护保养。

全部内部零件可更换。

阀门内外油漆，以提高耐腐蚀性能。

可于安装位置进行保养和维修。

橡胶阀瓣密封易于更换，毋需将阀瓣从阀门上拆除。

阀体开有用于连接总排水管和所有配件配置的螺纹接口。

阀门的低压差、独特插销与执行机构设计，使得阀门毋需拆开即能实现复位。

低压差设计，不受水柱压力影响。

系统只能按垂直配置安装。

该阀能利用水来使水力电机报警器和/或电动压力报警器工作，报警器将会持续报警直至水流停止。

阀门可配置用于湿式先导、干式先导或电动驱动系统。

对于尺寸规格为1 1/2 －8”/40－200 mm的阀门，介质为水时的额定工作压力为300 psi/2065 kPa，这些阀门已在工厂利用静水压力测试到600 psi/4135 kPa。

VdS配件配置认证压力为16巴。

其他欧洲配件配置认证压力为20巴。

（参见第16－18页）。

要求的空气压力为13 psi/90 kPa。

769系列以沟槽x沟槽形式的端口供货。

标准沟槽尺寸符合ANSI/AWWA C606要求。

安装选择唯特利769系列FireLock NXT雨淋阀可以光阀或下列配置供货（说明：成套配件可单独订购）：预装配预配置阀门采用所有必需的配置部件全套组装。

Vic-Quick快装竖管Vic-Quick快装竖管以整套预装配形式供货，它包括一个系统切断阀（采用一个705W系列FireLock蝶阀——请索取10.18号出版物；对于1 1/2 与2”/40与50 mm尺寸规格，Vic-Quick快装竖管配备的是一个728系列的球阀——请索取10.17号出版物）、压力开关和一个方便安装的排水套件。

有关Vic-Quick快装竖管全面完整的资讯，请索取30.20号出版物。

745系列FireLock Fire-Pac（仅供应北美市场）Fire-Pac是一个在最小的密闭空间内提供最多功能的全套预装配消防阀门。

电磁阀和液压阀电磁阀和液压阀作业⼀、电磁阀电磁阀的“通”和“位”“通”和“位”是换向阀的重要概念。

不同的“通”和“位”构成了不同类型的换向阀。

通常所说的“⼆位阀”、“三位阀”是指换向阀的阀芯有两个或三个不同的⼯作位置。

所谓“⼆通阀”、“三通阀”、“四通阀”是指换向阀的阀体上有两个、三个、四个各不相通且可与系统中不同油管相连的油道接⼝，不同油道之间只能通过阀芯移位时阀⼝的开关来沟通。

电磁阀选型⾸先应该依次遵循安全性，可靠性，适⽤性，经济性四⼤原则，其次是根据六个⽅⾯的现场⼯况(即管道参数、流体参数、压⼒参数、电⽓参数、动作⽅式、特殊要求进⾏选择。

作业⼀：两位三通电磁阀。

⼀、两位三通电磁阀规格与符号1、⼆位三通电磁阀选择参数范围：型号规格：DN0.5～DN500适⽤压⼒：0、0.1、0.6、1.0、1.6、2.5 .......................100MPa适⽤介质：⽓、⽔、油、蒸汽、制冷剂、腐蚀性流体介质温度：-200～+200℃介质粘度：⼩于50CSt（⼤于时需定制）防护性能：IP65防爆标志：ExdⅡCT5 防爆型型号中有F字母阀门材质：304、316、控制⽅式：⼀进⼆出(ZC2/31)、⼆进⼀出(ZC2/32), ⼀进⼀出(ZC2/3常闭式. ZC2/3K常开式)电源电压：DC3～127V AC36～380V连接⽅式：内螺纹、外螺纹、法兰泄漏量：零2、两位三通电磁阀外观3、两位三通电磁阀符号控制⽅式先导⽅式⽓动符号图Symbol单控内部先导外部先导双控内部先导外部先导⼆、⼆位三通电磁阀⼯作原理1、不同类型两位三通电磁阀⼯作过程①⼀进⼆出：(ZC2/31) 当电磁阀线圈通电时，出介质端(2)第⼀路打开，第⼆路(3)关闭；当电磁阀线圈断电时，出介质端第⼀路(2)关闭，第⼆路(3)打开；②⼆进⼀出：(ZC2/32) 当电磁阀线圈通电时，进介质端第⼀路(2)打开，第⼆路(3)关闭；当电磁阀线圈断电时，进介质端第⼀路(2)关闭，第⼆路(3)打开；(此内阀两进⼝端前必需加单向阀)③⼀进⼀出：常闭式(ZC2/3)---当电磁阀线圈通电时，接⼝2通向接⼝1，接⼝3关闭；当电磁阀线圈断电时，接⼝2关闭，接⼝1通向接⼝3；④常开式(ZC2/3K)---当电磁阀线圈断电时，接⼝3通向接⼝1，接⼝2关闭；当电磁阀线圈通电时，接⼝3关闭，接⼝1通向接⼝2。

电磁阀规格书编号：产品名称：CDF型电磁阀用途：汽车空调系统编制：校对：审核：批准：1．适用范围本规格书适用于本公司生产的以R134a、R410a为制冷剂的汽车空调系统用电磁阀。

2．术语和定义电磁阀是一种由线圈产生的电磁吸力控制内部芯铁上下活动，开闭阀口，从而控制流通介质通断的执行器件。

3．基本规格序号项目规格备注3.1 电源DC24V/DC12V3.2 电压变化额定电压的90%-110%范围3.3 最大工作压力4.2MPa3.4 额定功率<20W3.5 阀口公称通径Φ10mm3.6 适用制冷剂R134A、R410A等3.7 介质流动方向单向3.8 安装方式以阀体及线圈的断面中心线为轴，在垂直±15°以内3.9 适用环境温度-20℃～+55℃3.10 适用环境湿度95%RH以下3.11 适用液体温度-30℃～+105℃4. 环保要求4.1 阀体外表面要求耐NaCl、H2S等腐蚀；4.2 所用材料对人体无毒害且不产生有毒物质，符合RoHS要求；4.3 阀体内部结构材料需满足耐冷媒腐蚀，冲击；4.4 阀内部材料强度，刚度能满足产品性能要求；5. 外观构造5.1 外观、尺寸、构造、材质满足图纸要求。

5.2 外观无明显的伤痕、变形、氧化腐蚀、毛刺等缺陷，线圈引出线及端子完好无损。

5.3 产品由线圈与阀体组成。

5.4 阀体内部不得有切屑、油渍、锈迹等存在。

5.5 包装：接管进、出口端使用防尘帽。

6. 性能测试基本条件如下：6.1 安装：基本状态竖直安装，线圈安装在阀体上，阀体轴心线倾斜角度控制在15°以内；6.2 除有特别规定外，基本测试条件如下：6.2.1 室温（试验品）及流体温度：20±5℃；6.2.2 相对湿度：65±20%RH，无风；6.2.3 流动方向：进口管—出口管(单向)；6.2.4 电源：DC24V/DC12V；7．测试仪表要求：测试设备应在有效使用期内，并附有鉴定合格证，其仪表准确度等级应符合下列规定：①温度测量仪表准确度不低于1.0级；②压力测量仪表准确度等级不低于1.5级；③流量测量仪表准确度不低于1.5级；④电压测量仪表准确度等级不低于1.5级；⑤拉力测试仪表准确度等级不低于1.0级；⑥电阻测量仪表准确度不低于0.1级；8. 试验项目及试验方法：10. 标志、包装及贮存10.1 在电磁阀的标签上应标出下列内容：a．电磁阀型号及名称；b．额定电压；c．产品编号或生产日期；d. 制造厂名及商标；e. 介质流动方向；10.2、产品出厂时进、出气管口处应有防尘保护，并应做到清洁、防潮和防霉。

文件No.SY3000V-OMY0001电磁阀SY3000/5000/7000插入式安全注意事项--------------------------------------------------------------------------------------2,3设计注意事项--------------------------------------------------------------------------------------4,5选型-------------------------------------------------------------------------------------------------- 4,5安装--------------------------------------------------------------------------------------------------5配管--------------------------------------------------------------------------------------------------5配线--------------------------------------------------------------------------------------------------6给油--------------------------------------------------------------------------------------------------6空气源-----------------------------------------------------------------------------------------------6使用环境-------------------------------------------------------------------------------------------- 6维修保养-------------------------------------------------------------------------------------------- 7UL认证品------------------------------------------------------------------------------------------- 7产品个别注意事项-------------------------------------------------------------------------------- 8～14阀构造图-------------------------------------------------------------------------------------------- 15～17故障与对策-------------------------------------------------------------------------------------- 18,19安全注意事项此处所示的注意事项是为了确保您能安全正确地使用本产品，预先防止对您和他人造成危害和伤害而制定的。