友达5寸高亮工业液晶屏-G050VTN01.1

1.800.662.3537/us/ToughbookG1THE WORLD’S THINNEST AND LIGHTESTFULLY RUGGED 10.1" WINDOWS 10 PRO TABLETThe Toughbook ® FZ-G1 Windows 10 Pro tablet offers a fluid user experience while providing crucial port connectivity and feature-rich options in a compact size. Designed for highly mobile field workers, it’s the thinnest and lightest fully rugged 10.1" tablet running Windows 10 Pro 64-Bit. Powered by an Intel ® Core™ i5 vPro™ processor with a MIL-STD-810G and IP65 certified design, the FZ-G1 leads the way in rugged mobile computing. Add to that an HD daylight-readable 10-point gloved multi touch + waterproof digitizer pen, and it becomes an essential tool for field workers. With added Thermal camera and IR camera options. Can also support “Windows Hello” for enhanced security.TOUGHBOOK FZ-G1n 7th Generation Intel ® Core™ i5 vPro™ Processor n D aylight-readable Display with Gloved MultiTouch + waterproof digitizer pen n U p to 22 Hours of Use with an Optional Long Life Battery 1,6n I ntegrated Bridge Battery 6, SmartCard 6, 2DBarcode, Magstripe 6, RFID 6, Serial Options and More 2,3nC ertified for Use in Hazardous Locations onselected models (Class I Division 2)10n 3-year Warranty with Business Class Support n T hermal Camera option 3n I R Camera option, supports “Windows Hello”5Panasonic is constantly enhancing product specifications and accessories. Specifications subject to change without notice.Trademarks are property of their respective owners. | ©2018 Panasonic Corporation of North America. All rights reserved. Toughbook FZ-G1 mk5 Spec Sheet_07/18 | PSC-M18978SS1.800.662.3537/us/ToughbookG1WARRANTYn 3-year limited warranty, parts and laborDIMENSIONS & WEIGHT 8n 10.6"(L) x 7.4"(W) x 0.8"(H)n 2.4 lbs. (standard battery)n 2.9 lbs. (optional long life battery)INTEGRATED OPTIONS 9n 4G LTE multi carrier mobile broadband with satellite GPSn C hoice of LED or Laser 2D barcode reader (EA15 or EA21), GPS, Serial Dongle, Ethernet, MicroSDXC or second USB 2.0 port n C hoice of bridge battery, magstripe reader, insertable SmartCard reader,insertable SmartCard reader with bridge battery, contactless SmartCard/RFID HF reader or UHF 900MHz RFID reader n Thermal camera option ACCESSORIES 9nAC Adapter (3-prong) CF-AA6413CM n Standard Battery Pack FZ-VZSU84A2U n Long Life Battery Pack FZ-VZSU88U n MIL-461F version of standard battery (required to be 461Fcompliant) FZ-VZSU89A2U n Long Life Battery Bundle(includes rotating hand strap and corner guard set) FZ-BNDLG1LL1ST1CG4n Single Battery Charger Bundle FZ-BNDLG1BATCHRG n LIND 3-Bay Battery Charger FZ-LND3BAYG1n LIND Car Adapter 120W CF-LNDDC120n L IND Car/AC Adapter 90W (with USB port) CF-LNDACDC90n L IND Car Adapter 90W MIL-STD CF-LNDMLDC90n T all Corner Guard Set FZ-WCGG111n R otating Hand Strap and Tall Corner Guard Set Bundle FZ-BNDLG1ST1CG4n T oughMate G1 Always-On Case (with hand strap) TBCG1AONL-P n T oughMate G1 Professional Portfolio TBCG1PFLIO-BLK-P n ToughMate G1 “X” Hand Strap TBCG1XSTP-P n D esktop Cradle FZ-VEBG11AU n Vehicle Docks (no pass-through) – Gamber-Johnson 7160-0486-00-P – Havis with LIND power supply CF-H-PAN-702-P n Vehicle Docks (dual pass-through) – Gamber-Johnson 7160-0486-02-P – Havis with LIND power supply CF-H-PAN-702-2-P n Waterproof digitizer pen FZ-VNPG12U n Tether FZ-VNTG11U n 10.1" LCD Protective Film FZ-VPFG11U n Payment sleeve for Verifone e355 FZ-VPGG11MPlease consult your reseller or Panasonic representative before purchasing.Caution: Do not expose bare skin to this product when handling this unit in extreme hot or cold environments. A pproximate time. Battery operation and recharge times will vary based on many factors, including screen brightness, applications, features, power management, battery conditioning and other customer preferences. Battery testing results from MobileMark 2014. Bridge battery, magstripe reader, insertable SmartCard reader, insertable SmartCard reader with bridge battery, contactless SmartCard reader and UHF RFID reader are mutually exclusive. Please note, USB 3.0 port, HDMI port and Audio Jack cannot be accessed when the unit is equipped with the magstripe reader, but optional USB 2.0 port can be accessed. GPS, Serial Dongle, Ethernet, Barcode Reader, Thermal sensor, MicroSDXC and second USB 2.0 port are mutually exclusive options. 1GB = 1,000,000,000 bytes. Total usable memory will be less depending upon actual system configuration. When GPS or second USB is integrated, the webcam with infrared sensor cannot be installed. M agstripe reader, insertable SmartCard reader, insertable SmartCard reader with bridge battery, long life battery and UHF RFID reader include tall corner guards and rotating hand strap. Bridge battery (without SmartCard reader) includes medium corner guards and rotating hand strap. Requires software and activation to enable theft protection. Length measurements do not include protrusions. Weight varies with options and digitizer pen. A ccessories and Integrated Options may vary depending on your configuration. Visit the Panasonic website for more accessories and details. H azardous location certifications may not apply to all configurations. Consult your Panasonic representative for availability.SOFTWARE n W indows 10 Pro 64 bitDURABILITYn M IL-STD-810G certified (4’ drop, shock, vibration, rain, dust, sand, altitude, freeze/thaw, high/low temperature, temperature shock, humidity, explosive atmosphere)n IP65 certified sealed all-weather design n Optional ANSI/ISA 2.12.01-2013 Class I Division 2 on selected models n Solid state drive heatern Magnesium alloy chassis encased with ABS and elastomer corner guards n Optional hand strap or rotating hand strap n Port coversn Raised bezel for LCD impact protectionn Pre-installed replaceable screen film for LCD protection CPUn Intel Core i5-7300U vPro Processor– 2.6 GHz up to 3.5 GHz with Intel Turbo Boost Technology– Intel Smart Cache 3MBSTORAGE & MEMORY n 8GB DDR3L SDRAMn 256GB solid state drive (SSD) with heaternOptional 512GB and 1TB OptionDISPLAYn 10.1" WUXGA 1920 x 1200 with LED backlightingn 10-point capacitive multi touch + Waterproof Digitizer pen daylight-readable screen– 2-800 nit– IPS display with direct bonding– Anti-reflective and anti-glare screen treatments– Ambient light sensor, digital compass, gyro and acceleration sensors – Automatic screen rotation– Intel HD Graphics 620 (Built-in CPU) video controllerAUDIOn Integrated microphonen Intel High Definition Audio subsystem support n Integrated Monaural speakern On-screen and button volume and mute controls KEYBOARD & INPUTn 10-point gloved multi touch + digitizer screen– Supports bare-hand touch and gestures and electronic waterproof stylus pen – Supports glove mode and wet-touch mode n 7 tablet buttons (2 user-definable) n Integrated stylus holdern On-screen QWERTY keyboardCAMERAS n 2 MP (1920 x 1080 pixels), 30fps(Video), Monaural Microphone– Infrared Sensor with Windows Hello support5n 8MP rear camera with autofocus and LED flash INTERFACEn D ocking connector 24-pin n HDMIType An H eadphones/speaker Mini-jack stereo n USB 3.0 (x 1) Type A n Optional second USB 2.0 Type An Optional 10/100/1000 Ethernet RJ-45WIRELESSn Optional integrated 4G LTE multi carrier mobile broadband with satellite GPS – Sierra Wireless™ EM7455n Intel Dual Band Wireless-AC 8265 (IEEE802.11a/b/g/n/ac) n Bluetooth v4.2 , Classic mode/ Low Energy mode, Class 1 n O ptional dedicated GPS (u-blox)n Dual high-gain antenna pass-through POWER SUPPLYn L i-Ion battery pack:– Standard battery: Li-ion 11.1 V, 4200 mAh (typ.), 4080 mAh (min.)– Optional long life battery : Li-ion 10.8V, 9300mAh(typ.), 8700mAh (min.) n B attery operation :– Standard battery: 11 hours– Optional long life battery : 22 hours n B attery charging time :– Standard battery: 2.5 hours off, 3 hours on– Optional long life battery : 3 hours off, 4 hours onn O ptional bridge battery (1 minute swap time)n A C Adapter: Input: 100 V - 240 V AC, 50 Hz/ 60 Hz, Output: 16 V DC, 4.06ASECURITY FEATURESn Password Security: Supervisor, User, Hard Disk Lock n Kensington cable lock slotn Trusted platform module (TPM) security chip v.2.0 n Computrace theft protection agent in BIOS n Optional Insertable SmartCard readern Optional Contactless SmartCard/HF RFID reader– ISO 14443 A/B compliantPanasonic recommends Windows.。

1.5inch RGB OLED Module用户手册产品概述本产品是1.5寸彩色OLED显示屏，分辨率为128*128，带有内部控制器，支持4-wireSPI和3-wire SPI进行控制。

产品特性驱动芯片: SSD1351支持接口: 4-wire SPI、3-wire SPI分辨率: 128 * 128显示尺寸: 1.5inch显示颜色: 65K彩色工作电压: 3.3V / 5V管脚配置功能引脚描述VCC 电源正GND 电源地DIN 数据输入CLK 时钟输入CS 片选信号DC 数据/命令信号选择RST 复位信号本OLED模块提供两种通信方式：4-wire SPI和3wire-SPI，在模块的背面有一个可选择焊接的电阻，通过该电阻来选择通信方式。

如下图：模块出厂默认使用4线SPI通信，即BS0默认接0注：下表为接口连接。

BS CS D/C DIN CLK4-wire SPI 0 片选D/C MOSI SCK3-wire SPI 1 片选需接地MOSI SCL具体硬件配置，如下：使用4线SPI:即出厂设置,BS接0连接到GND，DIN接控制引脚MOSI, CLK接控制引脚SCK; 使用3线SPI: BS接1连接到VCC，D/C需接地，DIN接控制引脚MOSI, CLK接控制引脚SCK;SSD1351是一款128RGB * 128 Dot Mattrix OLED/PLED 控制器，其内部有一个128*128*18bit的SRAM作为显示缓存区，支持262k和65k两种颜色深度。

并支持8bit 8080并行、8bit 6800并行、3wire-SPI和4wire-SPI等通信方式。

本模块选择了4wire-SPI和3wire-SPI作为通信方式，减小模块的面积，同时节省了控制器的IO资源。

4WIRE-SPI通信协议在4wire-SPI通信中，先将DC置1或置0，再发送一个或多个字节的数据。

当DC置1时，发送的字节将作为显示数据存入SSD1351的SRAM中，作为显示数据。

品牌宏碁 Acer型号AO531H-0CR颜色靓丽红平台Intel软件操作系统Linpus Linux BE 操作系统处理器CPU类型Atom凌动速度N270(1.60GHz)系统总线533MHz二级缓存512KB芯片组芯片组Intel 945GSE内存内存容量1GB内存类型DDR2 667插槽数量 1 x SO-DIMM最大支持容量2GB硬盘硬盘容量250GB转速5400转/分钟接口类型SATA 串行显卡类型集成显卡显示芯片Intel GMA950显存容量共享系统内存（集成）显示器屏幕尺寸10.1英寸显示比例宽屏物理分辨率1024 x 600屏幕类型LED背光特征丽镜宽屏，支持 Acer CrystalBrite技术光驱光驱类型无光驱通信调制解调器modem 无内置蓝牙无局域网10/100Mbps无线局域网802.11b/g无线模块内置3G 无端口PC卡插槽无USB 3 个IEEE 1394 无音频端口 1 x 麦克风接口; 1 x 音频接口显示端口VGA x 1音效系统扬声器双立体声音箱内置麦克风有输入设备键盘ASOne专用键盘,89%标准尺寸触摸板多触点触控板其它设备网络摄像头有摄像头像素30万指纹识别无读卡器 5 in 1读卡器电源电池3芯锂离子电池续航时间2-3小时, 具体时间视使用环境而定电源适配器100-240V自适应交流电源适配器机器规格尺寸255 (W) x 183 (D) x 19/26.9 (H) mm重量 1 kg(含3芯电池)特性特性描述支持Acer Recovery 还原管理软件电池x1 电源适配器x1 说明书x1本产品全国联保，享受三包服务，质保期为：三年有限质保，全球联保一年；笔记本电脑：整机三包有效期1年。

保修36个月的硬件包括：CPU、内存。

保修24个月的硬件包括：主板、显卡、LCD屏、硬盘、电源适配器、键盘、鼠标模块。

保修12个月的硬件包括：LCD之附件、光驱、DVD、CDR/W、软驱、Modem卡、网卡、摄像头等其余功能模块和部件。

■acer宏基Acer FP563 = 15 inch 35ms TN (AUO L150X2M-1) panel.Acer AL1712 = 17 inch 16 ms TN panel.Acer AL1713 = 17 inch 25 ms TN (CPT CLAA170EA02) panel.Acer AL1714 = 17 inch 14 ms TN panel.Acer AL1715ms/msd = 17 inch 12 ms TN panel.Acer AL1732 = 17 inch 12 ms TN (AUO M170EG01 V9) panel.Acer AL1751wm = 17 inch 25 ms P-MVA (AUO M170XW01) panel.Acer AL1912s = 19 inch 16 ms TN panel.Acer AL1921 = 19 inch 25 ms PVA (SAMSUNG) panel.Acer AL1931 = 19 inch 25 ms MVA (Fujitsu) panel.Acer AL1922As = 19 inch 8 ms (g2g) PVA (SAMSUNG LTM190E4) panel. Acer AL2017 = 20.1 inch 8 ms TN (CMO M201P1-L01) panel. [SXGA+] Acer AL2021 = 20.1 inch 25 ms MVA (Fujitsu FLC51UXC8V) panel.Acer AL2021 ver2 = 20.1 inch 16 ms S-IPS (LG.Philips LM201U04) panel .Acer AL2021 ver3 = 20.1 inch 16 ms S-PVA (SAMSUNG LTM201U1) panel. Acer Ferrari F-20 (widescreen) = 20.1 inch 8 ms (g2g) P-MVA (AUO M2 01EW01) panel.Acer AL2416W (widescreen) = 24 inch 6 ms (g2g) PVA (SAMSUNG LTM240M1 ) panel■APPLE苹果Apple Studio Display 15 M2454 = 15 inch TN (LG.Philips LM151X3) pane l.Apple Studio Display 17 M7649 = 17 inch 35 ms ACE (SAMSUNG LTM170E4 -P01) panel.Apple Cinema Display 20 M8893 = 20.1 inch 50 ms DD-IPS (IDTech IAWS 64) panel.Apple Cinema Display 20 M9177 = 20.1 inch 16 ms S-IPS (LG.Philips L M201W01) panel.Apple Cinema Display 22 M5662 = 22 inch 60 ms IPS (LG.Philips LM220 W1) panel.Apple Cinema Display 23 M8537 = 23 inch 25 ms S-IPS (LG.Philips LM2 30W01) panel.Apple Cinema Display 23 M9178 = 23 inch 16 ms S-IPS (LG.Philips LM2 30W02) panel.Apple Cinema Display 30 M9179 = 30 inch 16 ms S-IPS (LG.Philips LM3 00W01) panel.■DELL戴尔DELL是世界最大的LCD成品生产与销售商Dell 1501FP = 15 inch TN (Toshiba LTM15C430) panel.Dell 1501FP ver2 = 15.1 inch 50 ms TN (LG.Philips LM151X2) panel.Dell 1503FP = 15 inch TN (SAMSUNG LTM150XS-L01) panel.Dell 1701FP = 17 inch TN (SAMSUNG LTM170E4-L01) panel.Dell 1702FP = 17 inch PVA (SAMSUNG) panel.Dell 1703FP = 17 inch 25ms PVA (SAMSUNG) panel.Dell 1704FPT = 17 inch 12 ms TN (SAMSUNG LTM170EU) panel.Dell 1704FPV = 17 inch 25 ms PVA (SAMSUNG LTM170E8-L01) panel.Dell 1706FP = 17 inch 25 ms PVA (SAMSUNG LTM170E8) panel.Dell 1800FP = 18 inch 30 ms IPS (LG.Philips LM181E06) panel.Dell 1900FP = 19 inch 25 ms PVA (SAMSUNG LTM190E1) panel.Dell 1905FP = 19 inch 20 ms PVA (SAMSUNG LTM190E4-L02) panel.Dell 1905FP ver2 = 19 inch 8 ms P-MVA (AUO M190EN03 V0) panel. Dell 1906FP = 19 inch 25 ms PVA (SAMSUNG LTM190E4) panel.Dell 2000FP = 20.1 inch 25 ms S-IPS (LG.Philips LM201U02) panel. Dell 2001FP = 20.1 inch 16 ms S-IPS (LG.Philips LM201U04) panel. Dell 2001FP ver2 = 20.1 inch 16 ms S-IPS (LG.Philips LM201U04-SL02) panel.Dell 2001FP ver3 = 20.1 inch 12 ms (g2g) S-PVA (SAMSUNG LTM201U1-L01 ) panel.Dell 2007FP = 20.1 inch 16 ms S-IPS (LG.Philips LM201U05) panel. Dell 2007FP ver2 = 20.1 inch 16 ms S-PVA (SAMSUNG LTM201U1) panel. Dell 2005FPW (widescreen) = 20.1 inch 16 ms S-IPS (LG.Philips LM201W0 1) panel.Dell 2007WFP (widescreen) = 20.1 inch 16 ms S-IPS (LG.Philips LM201WE 2) panel.Dell 2405FPW (widescreen) = 24 inch 12 ms (g2g) PVA (SAMSUNG LTM240W 1-L04) panel.Dell 2405FPW (widescreen) ver2 = 24 inch 12 ms (g2g) PVA (SAMSUNG L TM240M1-L01) panel.Dell 2407WFP (widescreen) = 24 inch 6 ms (g2g) PVA (SAMSUNG LTM240M2 ) panel.Dell 3007WFP (widescreen) = 30 inch 11 ms (g2g) S-IPS (LG.Philips LM 300W01) panel.BenQ 明基BenQ FP591 = 15 inch 16 ms TN (AUO M150XN04) panel.BenQ FP71E+ = 17 inch 8 ms TN (AUO M170EG01) panel.BenQ FP71G+ = 17 inch 8 ms TN (AUO M170EG01) panel.BenQ FP71V+ = 17 inch 4 (g2g) ms TN (AUO) panel.BenQ FP71W = 17 inch 25 ms P-MVA (AUO) panel.BenQ FP72V = 17 inch 25 ms PVA (SAMSUNG) panel.BenQ FP731 = 17 inch 25 ms TN (CPT CLAA170EA03) panel.BenQ FP757 = 17 inch 16 ms TN (LG.Philips LM170E01) panel.BenQ FP767 = 17 inch 16 ms TN (AUO M170EG01 V0) panel.BenQ FP767 ver2 = 17 inch 12 ms TN (AUO M170EG01 V1) panel.BenQ FP781 = 17 inch 35 ms ACE (SAMSUNG LTM170E4) panel.BenQ FP783 = 17 inch 12 ms TN (AUO M170EG01 V0) panel.BenQ FP785 = 17 inch 25 ms P-MVA (AUO M170EG02) panel.BenQ FP791 = 17 inch 16 ms TN (AUO M170EN06 V2) panel.BenQ FP882 = 18.1 inch 50 ms IPS (LG.Philips LM181E05-C4) panel. BenQ FP1931M = 19 inch 25 ms P-MVA (Fujitsu FLC48SXC8V-01) panel. BenQ FP91E = 19 inch 8 ms (g2g) PVA (SAMSUNG LTM190E4-L02) panel. BenQ FP91G = 19 inch 12ms TN (AUO M190EN04) panel.BenQ FP91GP = 19 inch 8 ms (g2g) P-MVA (AUO M190EG01 V0) panel. BenQ FP91G P = 19 inch 8 ms (g2g) P-MVA (AUO M190EN03 V0) panel. BenQ FP91V = 19 inch 4ms (g2g) TN (AUO M190EG02 V0) panel.BenQ FP91V+ = 19 inch 6ms (g2g) TN (AUO) panel.BenQ FP931 = 19 inch 16 ms (g2g) TN (AUO) panel.BenQ FP937s = 19 inch 12ms TN (AUO M190EN04) panel.BenQ FP937s ver2 = 19 inch 12ms TN (LG.Philips LM190E03) panel. BenQ FP937s+ = 19 inch 8ms TN (SAMSUNG LTM190EX-L01) panel.BenQ FP937s+ ver2 = 19 inch 8ms TN (AUO) panel.BenQ FP93GX = 19 inch 2 ms (g2g) TN (AUO M190EG02 V1) panel.BenQ FP951 = 19 inch 25 ms (g2g) MVA (AUO) panel.BenQ FP991 = 19 inch 25 ms MVA-P (Fujitsu FLC48SXC8V) panel.BenQ FP992 = 19 inch 25 ms P-MVA (AUO M190EN02) panel.BenQ FP2081 = 20.1 inch 25 ms S-IPS (LG.Philips LM201U02) panel. BenQ FP2081 ver2 = 20.1 inch 16 ms S-IPS (LG.Philips LM201U04) panel .BenQ FP2091 = 20.1 inch 16 ms S-IPS (LG.Philips LM201U04) panel. BenQ FP2092 = 20.1 inch 12 ms (g2g) S-PVA (SAMSUNG LTM201U1-L01) pan el.BenQ FP202W (widescreen) = 20.1 inch 8 ms TN (CPT CLAA201WA01) panel .BenQ FP231W (widescreen) = 23 inch 25 ms S-IPS (LG.Philips LM230W01) panel.BenQ FP231W (widescreen) ver2 = 23 inch 16 ms S-IPS (LG.Philips LM23 0W02) panel.■EIZO艺卓Eizo L371 = 15 inch 35 ms TN (SHARP) panel.Eizo L375 = 15 inch 25 ms TN (Mitsubishi AA150XJ01) panel.Eizo GAWIN M-10 = 15 inch 30 ms S-IPS (Hitachi TX317VC0CAA) panel. Eizo L461 = 16 inch 45 ms TN (SHARP LQ160E1LG08) panel.Eizo L465 = 16 inch 45 ms TN (SHARP LQ160E1LG21) panel.Eizo L550 = 17 inch 16 ms TN (AUO) panel.Eizo L551 (P170) = 17 inch 16 ms TN (SHARP LQ170E1LG11) panel.Eizo L557 = 17 inch 25 ms PVA (SAMSUNG LTM170E6-L03) panel.Eizo L560t-c = 17 inch 25 ms PVA (SAMSUNG) panel.Eizo L560t-c-k = 17 inch 25 ms PVA (SAMSUNG) panel.Eizo L565 = 17 inch 35 ms S-IPS (Hitachi TX43D15VC0CAD) panel.Eizo L567 = 17 inch 35 ms S-IPS (Hitachi TX43D15VC0CAD) panel.Eizo L568 (S170) = 17 inch 25 ms PVA (SAMSUNG LTM170E8-L02) panel. Eizo L578 (M170) = 17 inch 12 ms (g2g) PVA (SAMSUNG LTM170E8) panel .Eizo M1700 = 17 inch 8 ms TN (SAMSUNG LTM170EU) panel.Eizo P1700 = 17 inch 8 ms TN (SAMSUNG LTM170EU) panel.Eizo PLACEO = 17 inch 35 ms S-IPS (Hitachi TX43D15VC0CAD) panel. Eizo L66 = 18.1 inch TN (SHARP LQ181E1DR10) panel.Eizo L660 = 18.1 inch 50 ms IPS (IBM ITSX94N) panel.Eizo L661 = 18.1 inch 45 ms TN (SHARP LQ181E1DG11) panel.Eizo L665 = 18.1 inch 40 ms DD-IPS (IDTech ITSX98) panel.Eizo L671 = 18.1 inch 45 ms ASV (SHARP LQ181E1DW21) panel.Eizo L675 = 18.1 inch 50 ms IPS (IBM ITSX94N1) panel.Eizo L676 = 18.1 inch 25 ms ASV (SHARP LQ181E1LW31) panel.Eizo L680 = 18.1 inch 40 ms S-IPS (Hitachi TX46D14VC0CA panel.Eizo L685 = 18.1 inch 40 ms DD-IPS (IDTech ITSX98) panel.Eizo L685EX = 18.1 inch 40 ms DD-IPS (IDTech ITSX98N) panel.Eizo L695 = 18.1 inch 40 ms DD-IPS (IDTech ITSX98N) panel.Eizo L760t-c = 19 inch 20 ms PVA (SAMSUNG) panel.Eizo L760t-c-k = 19 inch 20 ms PVA (SAMSUNG) panel.Eizo L767 = 19 inch 25 ms PVA (SAMSUNG LTM190E1-L03) panel.Eizo L768 = 19 inch 25 ms PVA (SAMSUNG LTM190E4-L02) panel.Eizo L768-AS = 19 inch 25 ms PVA (SAMSUNG LTM190E1-L03) panel.Eizo L778 (M190) = 19 inch 12 ms (g2g) PVA (SAMSUNG LTM190E4) panel .Eizo L788 = 19 inch 25 ms PVA (SAMSUNG LTM190E4-L02) panel.Eizo L795 = 19 inch 25 ms PVA (SAMSUNG LTM190E1-L03) panel.Eizo L797 = 19 inch 25 ms SA-SFT (NEC NL128102BC29-01) panel.Eizo S190 = 19 inch 25 ms PVA (SAMSUNG LTM190E1-L03) panel.Eizo S1910 = 19 inch 12 ms (g2g) PVA (SAMSUNG LTM190E4) panel.Eizo S1910-HR = 19 inch 8 ms (g2g) PVA (SAMSUNG LTM190E4-L02) panel.Eizo M1950 = 19 inch 8 ms (g2g) PVA (SAMSUNG LTM190E4-L02) panel. Eizo L771 = 19.6 inch 45 ms TN (SHARP LQ196U1LG01) panel.Eizo L885 = 20.1 inch 20 ms ASV (SHARP LQ201U1LW21) panel.Eizo L887 = 20.1 inch 20 ms ASV (SHARP LQ201U1LW28) panel.Eizo L985EX = 21.3 inch 50 ms S-IPS (Hitachi TX54D11VC0CA panel. Eizo L997 = 21.3 inch 30 ms S-IPS (Hitachi TX54D11VC0CAC) panel. Eizo S2110W (Widescreen) = 21.1 inch 8 ms (g2g) S-PVA (SAMSUNG LTM21 0M1-L01) panel.Eizo S2110W-K (Widescreen) = 21.1 inch 8 ms (g2g) S-PVA (SAMSUNG LTM 210M1-L01) panel.Eizo S2410W (widescreen) = 24.1 inch 8 ms (g2g) S-PVA (SAMSUNG LTM24 0M2-L01) panel.Eizo S2410W-K (widescreen) = 24.1 inch 8 ms (g2g) S-PVA (SAMSUNG LTM 240M2-L01) panel.Eizo CG18 = 18.1 inch 40 ms DD-IPS (IDTech ITSX98) panel.Eizo CG19 = 19 inch 25 ms SA-SFT (NEC NL128102BC29-01) panel.Eizo CE210W (widescreen) = 21.1 inch 8 ms (g2g) S-PVA (SAMSUNG LTM21 0M1-L01) panel.Eizo CG21 = 21.3 inch 50 ms S-IPS (Hitachi TX54D11VC0CA panel.Eizo CG210 = 21.3 inch 30 ms S-IPS (Hitachi TX54D11VC0CAC) panel. Eizo CG220 (widescreen) = 22.2 inch 37 ms S-IPS (Mitsubishi AA222ZA01 ) panel.Eizo CE240W (widescreen) = 24.1 inch 8 ms (g2g) S-PVA (SAMSUNG LTM24 0M2-L01) panel.Eizo FA-2090 = 20.8 inch 50 ms DD-IPS (IDTech ITQX20) panel.■HP惠普HP L1520 = 15 inch TN (AUO L150X3M) panel.HP L1706 = 17 inch 12 ms TN panel.HP L1740 = 17 inch 13 ms TN panel.HP L1755 = 17 inch 25 ms PVA (SAMSUNG LTM170E8) panel.HP vs17 = 17 inch 16 ms TN panel.HP vs17e = 17 inch 8 ms TN panel.HP vs17x = 17 inch 16 ms TN panel.HP L1906 = 19 inch 12 ms TN panel.HP L1940 = 19 inch 25 ms MVA panel.HP L1955 = 19 inch 16 ms S-MVA panel.HP vs19 = 19 inch 16 ms TN panel.HP vs19e = 19 inch 8 ms TN panel.HP L2035 = 20 inch 16 ms S-IPS (LG.Philips LM201U04) panel.HP L2105 (Widescreen) = 21 inch 16 ms S-PVA (SAMSUNG LTM210M2) panel .HP F2304 (Widescreen) = 23 inch 25 ms S-IPS panel.HP L2335 (Widescreen) = 23 inch 16 ms S-IPS (LG.Philips LM230W02) pa nel.备注：HP显示器多是AOC的OEM■Hyundai现代Hyundai B70A = 17 inch 8 ms TN panel.Hyundai B71A = 17 inch 8 ms TN panel.Hyundai B90A = 19 inch 8 ms TN (SAMSUNG LTM190EX-L01) panel. Hyundai B91A = 19 inch 8 ms TN panel.Hyundai L19T = 19 inch 25 ms MVA panel.Hyundai L19T+ = 19 inch 8 ms TN panel.Hyundai L70D+ = 17 inch 12 ms TN panel.Hyundai L70S+ = 17 inch 12 ms TN (SAMSUNG LTM170EU-L11) panel. Hyundai L72D = 17 inch 8 ms TN panel.Hyundai L73D = 17 inch 8 ms TN panel.Hyundai L90D+ = 19 inch 8 ms TN (SAMSUNG LTM190EX-L01) panel.Hyundai L91A = 19 inch 12 ms TN panel.Hyundai L91D = 19 inch 12 ms (g2g) MVA panel.Hyundai Q17 = 17 inch 20 ms TN (Hydis HT17E11-300 or HT17E12) panel. Hyundai Q17+ = 17 inch 12 ms TN (SAMSUNG LTM170EU-L11) panel.Hyundai Q320 = 32 inch 8 ms (g2g) PVA panel.Hyundai Q321 = 32 inch 8 ms (g2g) PVA panel.Hyundai Q400 = 40 inch 8 ms (g2g) PVA panel.Hyundai Q70U = 17 inch 3 ms (g2g) TN panel.Hyundai Q90U = 19 inch 3 ms (g2g) TN (AUO M190EG02 V1) panel.■Hyun dai 现代Hyundai B70A = 17 inch 8 ms TN panel.Hyundai B71A = 17 inch 8 ms TN panel.Hyundai B90A = 19 inch 8 ms TN (SAMSUNG LTM190EX-L01) panel.Hyundai B91A = 19 inch 8 ms TN panel.Hyundai L19T = 19 inch 25 ms MVA panel.Hyundai L19T+ = 19 inch 8 ms TN panel.Hyundai L70D+ = 17 inch 12 ms TN panel.Hyundai L70S+ = 17 inch 12 ms TN (SAMSUNG LTM170EU-L11) panel. Hyundai L72D = 17 inch 8 ms TN panel.Hyundai L73D = 17 inch 8 ms TN panel.Hyundai L90D+ = 19 inch 8 ms TN (SAMSUNG LTM190EX-L01) panel.Hyundai L91A = 19 inch 12 ms TN panel.Hyundai L91D = 19 inch 12 ms (g2g) MVA panel.Hyundai Q17 = 17 inch 20 ms TN (Hydis HT17E11-300 or HT17E12) panel. Hyundai Q17+ = 17 inch 12 ms TN (SAMSUNG LTM170EU-L11) panel.Hyundai Q320 = 32 inch 8 ms (g2g) PVA panel.Hyundai Q321 = 32 inch 8 ms (g2g) PVA panel.Hyundai Q400 = 40 inch 8 ms (g2g) PVA panel.Hyundai Q70U = 17 inch 3 ms (g2g) TN panel.Hyundai Q90U = 19 inch 3 ms (g2g) TN (AUO M190EG02 V1) panel.■IBM国际商用机器公司IBM L170m = 17 inch 16 ms TN panel.IBM L170P = 17 inch 25 ms PVA panel.IBM L171p = 17 inch 8 ms TN panel.IBM L190P = 19 inch 25 ms PVA panel.IBM L200p = 20 inch 16 ms S-IPS (LG.Philips LM201U03) panel.IBM T210 = 20.8 inch 50 ms IPS (IDTech ITQX20E) panel.IBM T221 = 22.2 inch 50 ms DD-IPS (IDTech MD22292B2/C2) panel.■Iiyama 饭山机电Iiyama AS4311U = 17 inch 40 ms ACE (SAMSUNG LTM170E4) panel.Iiyama AS4314UT = 17 inch 20 ms TN (HyDis HT17E12) panel.Iiyama AS4332UT = 17 inch 25 ms PVA (SAMSUNG) panel.Iiyama AS4431D = 17.4 inch 25 ms MVA (Fujitsu FLC44SXC8V) panel. Iiyama H430 = 17 inch 25 ms TN (CMO M170E6-L02 Rev.c1) panel. Iiyama E431S = 17 inch 16 ms TN (LG.Philips LM170E01) panel.Iiyama E480S-B = 19 inch 8 ms TN (SAMSUNG LTM190EX-L01) panel. Iiyama E480S-S = 19 inch 8 ms TN (SAMSUNG LTM190EX-L01) panel. Iiyama E481S-3 = 19 inch 8 ms TN (SAMSUNG LTM190EX-L01) panel. Iiyama E481S-1 = 19 inch 25 ms S-IPS (LG.Philips LM190E01-C4) panel. Iiyama H1900-W/B = 19 inch 8 ms MVA-P (Fujitsu) panel.Iiyama L400W-B = 40 inch 23 ms PVA (SAMSUNG) panel.Iiyama AQU5611DT = 22 inch 50 ms DD-IPS (IDTech MD22292B2) panel.■LG乐金电子LG L172WT = 17 inch 25 ms S-IPS (LG.Philips LC171W03) panel.LG L173WA = 17 inch 25 ms S-IPS (LG.Philips LC171W03) panel.LG L1710B/S = 17 inch 16 ms TN (LG.Philips LM170E01-A4) panel.LG L1710B/S ver2 = 17 inch 16 ms TN (Hydis HT17E12-100) panel.LG L1710B/S ver3 = 17 inch 16 ms TN (AUO M170EN05) panel.LG L1715S (L1716S) = 17 inch 16 ms TN (LG.Philips LM170E01-A4) panel .LG L1715S (L1716S) ver2 = 17 inch 16 ms TN (Hydis HT17E12-200) pane l.LG L1715S (L1716S) ver3 = 17 inch 16 ms TN (AUO M170EN05) panel. LG L1720B/P/S = 17 inch 16 ms TN (LG.Philips LM170E01-A4) panel.LG L1720B/P/S ver2 = 17 inch 16 ms TN (LG.Philips LM170E01-A5) panel .LG L1730B/P/S = 17 inch 12 ms TN (LG.Philips LM170E01-A6) panel.LG L1810B = 18.1 inch 30 ms IPS (LG.Philips LM181E06-A4) panel.LG L1811B/S = 18.1 inch 30 ms IPS (LG.Philips LM181E05-C3/C4) panel. LG L1811B/S ver2 = 18.1 inch 30 ms IPS (LG.Philips LM181E06) panel.LG L1910B = 19 inch 25 ms S-IPS (LG.Philips LM190E01-C4) panel.LG L1915S = 19 inch 12 ms TN (LG.Philips LM190E03-B4) panel.LG L1920B = 19 inch 25 ms S-IPS (LG.Philips LM190E01-C4) panel.LG L1930B = 19 inch 25 ms S-IPS (LG.Philips LM190E01-C4) panel.LG L1930S = 19 inch 25 ms S-IPS (LG.Philips LM190E01-C4) panel.LG L1940B = 19 inch 25 ms S-IPS (LG.Philips LM190E02) panel.LG L1980U = 19 inch 12 ms TN (LG.Philips LM190E03) panel.LG L2000C = 20.1 inch 8 ms (g2g) S-IPS (LG.Philips LM201U05) panel. LG L2010B/P = 20.1 inch 25 ms S-IPS (LG.Philips LM201U03) panel.LG L2010B/P ver2 = 20.1 inch 16 ms S-IPS (LG.Philips LM201U04) panel .LG M203WA (widescreen) = 20.1 inch 16 ms S-IPS (LG.Philips LM201W01) panel.LG L2320A (widescreen) = 23 inch 25 ms S-IPS (LG.Philips LM230W01) p anel.■Mitsubishi三菱Mitsubishi MDT151X = 15 inch TN (Mitsubishi AA150XA03) panel.Mitsubishi RDT151X = 15.1 inch 50 ms TN (LG.Philips LM151X2) panel. Mitsubishi RDT152X = 15 inch TN (Mitsubishi AA150XB01) panel.Mitsubishi RDT152X-S = 15 inch TN (LG.Philips LM150X05) panel. Mitsubishi RDT195V = 19 inch 25ms S-IPS (LG.Philips LM190E01-C4) panel. Mitsubishi SX98lcd/">LCD = 19 inch 25 ms PVA (SAMSUNG LTM190E1-L03) p anel.Mitsubishi UX21LCD = 21.3 inch 20 ms SA-SFT (NEC NL160120BC27-02) pan el.Mitsubishi RDT211H = 21.3 inch 20 ms SA-SFT (NEC NL160120BC27-02) pan el.■NEC日本电器公司NEC LCD1760NX = 17 inch 16 ms TN (AUO M170EN05) panel.NEC LCD1760NX ver2 = 17 inch 16 ms TN (LG.Philips LM170E01) panel. NEC LCD1770GX = 17 inch 8 ms TN panel.NEC LCD1770GX-BK = 17 inch 8 ms TN panel.NEC LCD1770NX = 17 inch 12 ms TN (LG.Philips LM170E01-G5) panel.NEC LCD70GX2 = 17 inch 4 ms (g2g) TN panel.NEC LCD72VM = 17 inch 16 ms TN (QD1s QD17EL07) panel.NEC LCD72XM = 17 inch 16 ms TN panel.NEC LCD72XM-BK = 17 inch 8 ms TN panel.NEC LCD1860NX = 18.1 inch 30 ms IPS (LG.Philips LM181E06-C4) panel. NEC LCD1880SX = 18.1 inch 33 ms A-SFT (NEC NL128102AC28-07) panel. NEC LCD1920NX = 19 inch 25 ms P-MVA (Fujitsu FLC48SXC8V-01) panel. NEC LCD1960NX = 19 inch 25 ms PVA (SAMSUNG) panel.NEC LCD1960NXi = 19 inch 25 ms S-IPS (LG.Philips LM190E01-C4/E02) pan el.NEC LCD1970GX = 19 inch 8 ms TN (SAMSUNG LTM190EX-L01) panel.NEC LCD1970NX = 19 inch 25 ms S-IPS (LG.Philips LM190E01-C4/E02) pane l.NEC LCD1980SX = 19 inch 25 ms PVA (SAMSUNG LTM190E1-L03) panel.NEC LCD1970NXp = 19 inch 20 ms MVA panel.NEC LCD1970V = 19 inch 16 ms TN panel.NEC LCD1970VX = 19 inch 16 ms TN panel.NEC LCD1980SX = 19 inch 25 ms PVA (SAMSUNG LTM190E1-L03) panel.NEC LCD1980SXi = 19 inch 25 ms PVA (LG.Philips LM190E02-B4) panel. NEC LCD1980FXi = 19 inch 18 ms S-IPS (LG.Philips LM190E05-SL02) panel. NEC LCD1990SXi = 19 inch 18 ms S-IPS panel.NEC LCD91VM = 19 inch 25 ms PVA (SAMSUNG) panel.NEC LCD92VM = 19 inch 16 ms TN (AUO M190EN4) panel.NEC LCD90GX2 = 19 inch 4 ms (g2g) TN panel.NEC LCD92VM = 19 inch 16 ms TN (AUO M190EN4) panel.NEC LCD92XM = 19 inch 8 ms TN panel.NEC SpectraView 1980 = 19 inch 25 ms S-IPS (LG.Philips LM190E02) pan el.NEC LCD2080UX = 20.1 inch 25 ms S-IPS (LG.Philips LM201U03) panel. NEC LCD2080UX+ = 20.1 inch 16 ms S-IPS (LG.Philips LM201U04) panel. NEC LCD2080UXi = 20.1 inch 16 ms S-IPS (LG.Philips LM201U04-SL02) pan el.NEC LCD2090UXi = 20.1 inch 16 ms S-IPS (LG.Philips LM201U04-SL02) pan el.NEC LCD2070WNX (widescreen) = 20.1 inch 8 ms TN (CPT CLAA201WA01) pa nel.NEC LCD20WGX2 (widescreen) = 20 inch 6 ms (g2g) S-IPS (LG.Philips LM 201W01) panel.NEC LCD2170NX = 21.3 inch 8 ms (g2g) S-PVA (SAMSUNG LTM213U6) panel. NEC LCD2170NX-BK = 21.3 inch 8 ms (g2g) S-PVA (SAMSUNG LTM213U6) pan el.NEC LCD2180UX = 21.3 inch 20 ms SA-SFT (NEC NL160120BC27-02) panel. NEC LCD2180WG (LED) = 21 inch 20 ms SA-SFT (NEC NL160120BC27-02) pan el.NEC LCD2190UXi = 21.3 inch 10 ms (g2g) SA-SFT (NEC NL160120BC27-14) panel.NEC LCD3210 = 32 inch 20 ms S-IPS panel.NEC LCD4610 = 46 inch 8 ms (g2g) PVA (SAMSUNG LTA460W2) panel.■SAMSUNG三星电子SAMSUNG 152S = 15 inch 25 ms TN (Sanyo TM150XG-26L06) panel. SAMSUNG 171N = 17 inch 25 ms TN (SAMSUNG LTM170EU-L01) panel. SAMSUNG 171P = 17 inch 25 ms PVA (SAMSUNG LTM170E5) panel.SAMSUNG 172N = 17 inch 25 ms TN (SAMSUNG LTM170EU-L01-D) panel. SAMSUNG 172S = 17 inch 20 ms TN (Hydis HT17E12) panel.SAMSUNG 172T = 17 inch 25 ms PVA (SAMSUNG LTM170E5) panel.SAMSUNG 172X = 17 inch 12 ms TN (SAMSUNG LTM170EX-L01) panel. SAMSUNG 173P = 17 inch 25 ms PVA (SAMSUNG LTM170E6-L04) panel. SAMSUNG 173P+ = 17 inch 8 ms (g2g) PVA (SAMSUNG LTM170E8-L01) panel. SAMSUNG 173T = 17 inch 25 ms PVA (SAMSUNG LTM170E6-L02 or LTM170E6-L 04) panel.SAMSUNG 173VT = 17 inch 12 ms TN panel.SAMSUNG 181T = 18 inch 25 ms PVA (SAMSUNG LTM181E4) panel. SAMSUNG 191T = 19 inch 25 ms PVA (SAMSUNG LTM190E1) panel. SAMSUNG 193P = 19 inch 25 ms PVA (SAMSUNG LTM190E4) or 20 Ms PVA (LTM190E4-L02) panel.SAMSUNG 193P ver2 = 19 inch 20 Ms PVA (LTM190E4-L02) panel. SAMSUNG 193P+ = 19 inch 8 ms (g2g) PVA (SAMSUNG LTM190E4-L02) panel. SAMSUNG 194T = 19 inch 25 ms PVA (SAMSUNG LTM190E1-L03) panel. SAMSUNG 204T = 20 inch 16 ms (g2g) S-PVA (SAMSUNG LTM201U1) panel. SAMSUNG 204Ts = 20 inch 16 ms (g2g) S-PVA (SAMSUNG LTM201U1) panel. SAMSUNG 210T = 21 inch 35 ms PVA (SAMSUNG LTM213U3) panel. SAMSUNG 211MP = 21 inch 25 ms PVA (SAMSUNG LTM213U4-L04) panel. SAMSUNG 213T = 21 inch 25 ms PVA (SAMSUNG LTM213U4-L01 or SAMSUNG L M213U4-L04) panel.SAMSUNG 213T = 21 inch 25 ms PVA panel.SAMSUNG 214T = 21 inch 8 ms (g2g) S-PVA (SAMSUNG LTM213U6) panel. SAMSUNG 240T (Widescreen) = 24 inch 25 ms PVA (SAMSUNG LTM240W1) pan el.SAMSUNG 241MP (Widescreen) = 24 inch 25 ms PVA (SAMSUNG LTM240W1) pa nel.SAMSUNG 242MP = 24 inch 16 ms PVA (SAMSUNG LTM240M1-L01) panel. SAMSUNG 243T (Widescreen) = 24 inch 30 ms PVA (SAMSUNG LTM240W1-L03) panel.SAMSUNG 244T (widescreen) = 24 inch 6 ms (g2g) PVA (SAMSUNG LTM240M1 ) panel.SAMSUNG 400P = 40 inch 8 ms (g2g) PVA (SAMSUNG LTA400W2) panel. SAMSUNG 400Pn = 40 inch 8 ms (g2g) PVA (SAMSUNG LTA400W2) panel. SAMSUNG 460P = 46 inch 8 ms (g2g) PVA (SAMSUNG LTA460W2) panel. SAMSUNG 710MP = 17 inch 12 ms TN panel.SAMSUNG 710N = 17 inch 12 ms TN (SAMSUNG LTM170EU) panel.SAMSUNG 710T = 17 inch 12 ms TN (SAMSUNG LTM170EU-L11) panel. SAMSUNG 710V = 17 inch 16 ms TN panel.SAMSUNG 711T = 17 inch 25 ms PVA panel.SAMSUNG 713BM = 17 inch 8 ms TN panel.SAMSUNG 713N = 17 inch 8 ms TN (SAMSUNG LTM170EU) panel.SAMSUNG 720T = 17 inch 25 ms PVA (LTM170E8-L01) panel.SAMSUNG 721S = 17 inch 8 ms TN panel.SAMSUNG 721SA = 17 inch 8 ms TN panel.SAMSUNG 730BF = 17 inch 4 ms (g2g) TN panel.SAMSUNG 740N = 17 inch 8 ms TN panel.SAMSUNG 740T = 17 inch 25 ms PVA (SAMSUNG LTM170E8) panel. SAMSUNG 760BF = 17 inch 4 ms (g2g) TN panel.SAMSUNG 770P = 17 inch 6 ms (g2g) PVA (SAMSUNG LTM170E8) panel. SAMSUNG 910M = 19 inch 25 ms PVA (SAMSUNG LTM190E1-L03) panel. SAMSUNG 910MP = 19 inch 8 ms TN panel.SAMSUNG 910N = 19 inch 25 ms PVA (SAMSUNG LTM190E1-L03) panel. SAMSUNG 910T = 19 inch 25 ms PVA (SAMSUNG LTM190E1-L03) panel. SAMSUNG 910TM = 19 inch 25 ms PVA (SAMSUNG LTM190E1-L03) panel. SAMSUNG 913B = 19 inch 8 ms TN (SAMSUNG LTM190EX-L01) panel. SAMSUNG 913N = 19 inch 8 ms TN (SAMSUNG LTM190EX-L01) panel. SAMSUNG 913TM = 19 inch 8 ms (g2g) PVA (SAMSUNG LTM190E4) panel. SAMSUNG 913V = 19 inch 12 ms TN panel.SAMSUNG 915N = 19 inch 8 ms TN panel.SAMSUNG 920T = 19 inch 25 ms PVA (SAMSUNG LTM190E1-L03) panel. SAMSUNG 930B = 19 inch 8 ms TN (SAMSUNG) panel.SAMSUNG 930BF = 19 inch 4 ms (g2g) TN (SAMSUNG LTM190EX-L21) panel. SAMSUNG 930MP = 19 inch 25 ms PVA (SAMSUNG) panel.SAMSUNG 931MP = 19 inch 8 ms (g2g) PVA (SAMSUNG LTM190E4) panel. SAMSUNG 940B = 19 inch 8 ms TN panel.SAMSUNG 940MW (widescreen) = 19 inch 8 ms TN (SAMSUNG LTM190M2) pane l.SAMSUNG 940T = 19 inch 20 ms PVA (SAMSUNG LTM190E4) panel. SAMSUNG 960BF = 19 inch 4 ms (g2g) TN panel.SAMSUNG 970P = 19 inch 6 ms (g2g) PVA (SAMSUNG) panel.SAMSUNG LE-15S51B = 15 inch 25 ms TN (SAMSUNG LTM150XH-L06) panel. SAMSUNG LE-23R41B = 32 inch 8 ms (g2g) PVA (SAMSUNG LTA230W1-L02) pa nel.SAMSUNG LE-23R51B = 32 inch 8 ms (g2g) PVA (SAMSUNG LTA230W1-L02) pa nel.SAMSUNG LE-26M51B = 32 inch 8 ms (g2g) PVA (SAMSUNG LTA320W2) panel. SAMSUNG LE-26R41B = 26 inch 8 ms (g2g) PVA (SAMSUNG LTA260W2) panel. SAMSUNG LE-26R51B = 26 inch 8 ms (g2g) PVA (SAMSUNG LTA260W2) panel. SAMSUNG LE-32M51B = 32 inch 8 ms (g2g) PVA (SAMSUNG LTA320W2) panel. SAMSUNG LE-32M61B = 32 inch 8 ms (g2g) S-PVA panel.SAMSUNG LE-32R41B = 32 inch 8 ms (g2g) PVA (SAMSUNG LTA320W2) panel. SAMSUNG LE-32R51B = 32 inch 8 ms (g2g) PVA (SAMSUNG LTA320W2) panel. SAMSUNG LE-40M61B = 40 inch 8 ms (g2g) S-PVA panel.SAMSUNG LE-40R51B = 40 inch 8 ms (g2g) PVA (SAMSUNG LTA400W2) panel. SAMSUNG LE-46M51B = 46 inch 8 ms (g2g) S-PVA panel.SAMSUNG LW-15M23C = 15 inch 25 ms TN (SAMSUNG LTM150XH-L06) panel. SAMSUNG LW-17N23N = 17 inch 16 ms PVA (SAMSUNG LTA170W2-L01) panel. Samtron 73V = 17 inch 25 ms TN (SAMSUNG) panel.■SHARP夏普SHARP LL-T140A = 13.8 inch TN (SHARP) panel.SHARP LL-T1500A = 15 inch TN (SHARP LQ150X1DH10) panel.SHARP LL-T150A = 15 inch 45 ms TN (SHARP) panel.SHARP LL-T1502A = 15 inch 25 ms ASV (SHARP LQ150X1LW71) panel. SHARP LL-T1510A = 15 inch TN (SHARP LQ150X1DR10) panel.SHARP LL-T1511A = 15 inch TN (SHARP LQ150X1DR10) panel.SHARP LL-T15A1 = 15 inch TN (HYUNDAI HM15X11-200) panel.SHARP LL-T15G3-H/B = 15 inch 30 ms TN (SHARP LQ150X1DG80) panel. SHARP LL-T15G4-H/B = 15 inch 25 ms TN (SHARP LQ150X1LGN1A) panel. SHARP LL-T15V1 = 15 inch 25 ms TN (Mitsubishi AA150XC01) panel. SHARP LL-T1520-H/B = 15 inch 25 ms ASV (SHARP) panel.SHARP LL-T1530A = 15 inch TN (SHARP LQ150X1DR50) panel.SHARP LL-T1610W = 16 inch 45 ms TN (SHARP) panel.SHARP LL-T1620-H/B = 16 inch 25 ms ASV (SHARP LQ160E1LZ30) panel. SHARP LL-T17A3 = 17 inch 20 ms TN (SHARP) panel.SHARP LL-T17A4-H/B = 17 inch 20 ms TN (SHARP) panel.SHARP LL-T172A-B/W = 17 inch 16 ms TN (Hydis HT17E13-100) panel. SHARP LL-T1815-H/B = 18 inch 40 ms ASV (SHARP) panel.SHARP LL-T1820-H/B = 18 inch 25 ms ASV (SHARP LQ181E1LZ30) panel. SHARP LL-T18A1 = 18 inch 30 ms ASV (SHARP) panel.SHARP LL-T193G = 19 inch 18 ms S-IPS (LG.Philips LM190E05-SL02) panel .SHARP LL-T19D1-H/B = 19 inch 25 ms P-MVA (Fujitsu) panel.SHARP LL-T2010W = 20.1 inch 25 ms ASV (SHARP LQ201U1LZ00) panel. SHARP LL-T2015-H/B = 20.1 inch 16 ms S-IPS (LG.Philips LM201U04) pane l.SHARP LL-T2020-H/B = 20.1 inch 25 ms ASV (SHARP LQ201U1LZ00) panel.■SONY索尼SONY SDM-S51 = 15 inch 20 ms TN (LG.Philips LM150X05) panel.SONY SDM-M51 = 15 inch 20 ms TN (LG.Philips LM150X05) panel.SONY SDM-X52 = 15 inch 20 ms TN (LG.Philips LM150X05) panel.SONY SDM-M61 = 16 inch 35 ms TN (LG.Philips) panel.SONY SDM-S71 = 17 inch 20 ms TN (Samsung) panel.SONY SDM-S71R = 17 inch 30 ms TN (AUO) panel.SONY SDM-X72 = 17 inch 30 ms TN (AUO M170EN05) panel.SONY SDM-S74 = 17 inch 16 ms TN (AUO M170EN05-V1) panel.SONY SDM-HS73P = 17 inch 16 ms TN (AUO M170EN06 V2) panel.SONY SDM-HS74 = 17 inch 16 ms TN (AUO M170EN05-V5) panel.SONY SDM-HS74P = 17 inch 16 ms TN (AUO M170EN06 V2) panel.SONY SDM-HS75P = 17 inch 8 ms TN (AUO) panel.SONY SDM-HX73 = 17 inch 16 ms TN (LG.Philips LM170E01) panel.SONY SDM-S81 = 18.1 inch 20 ms IPS (CPT) panel.SONY SDM-M81 = 18.1 inch 30 ms IPS (LG.Philips LM181ES) panel. SONY SDM-X82 = 18.1 inch 50 ms IPS (LG.Philips LM181E05-C4) panel. SONY SDM-HS94P = 19 inch 12 ms PVA (AUO M190EN04 V1) panel.SONY SDM-HX95B = 19 inch 12 ms (g2g) PVA (Samsung LTM190E4) panel. SONY SDM-HX95S = 19 inch 12 ms (g2g) PVA (Samsung LTM190E4) panel. SONY SDM-S93 = 19 inch 25 ms MVA (AUO M190EN02) panel.SONY SDM-P234B = 23 inch 16 ms S-IPS (LG.Philips LM230W02) panel. SONY KLV-S23A10 = 23 inch 8 ms (g2g) PVA (Samsung LTA230W1-L02) pane l.SONY KLV-S26A10E = 26 inch 8 ms (g2g) PVA (Samsung LTA260W2) panel. SONY KLV-S32A10E = 32 inch 8 ms (g2g) PVA (Samsung LTA320W2) panel. SONY KLV-S40A10E = 40 inch 8 ms (g2g) PVA (Samsung LTA400W2) panel. SONY KLV-V26A10E = 26 inch 8 ms (g2g) PVA (Samsung LTA260W2) panel。

( V ) Preliminary Specifications( ) Final SpecificationsModule 10.4 Inch Color TFT-LCD Model Name G104VN01 V1Customer DateChecked &Approved byNote: This Specification is subject to changewithout notice. Approved by Date Debbie Chiu2009/02/11 Prepared byVivian Huang 2009/02/11 General Display Business Division / AU Optronics corporationContents1. Operating Precautions (4)2. General Description (5)2.1 Display Characteristics (5)2.2 Optical Characteristics (6)3. Functional Block Diagram (9)4. Absolute Maximum Ratings (10)4.1 Absolute Ratings of TFT LCD Module (10)4.2 Absolute Ratings of Environment (10)5. Electrical Characteristics (11)5.1 TFT LCD Module (11)5.2 Backlight Unit (13)6. Signal Characteristics (14)6.1 Pixel Format Image (14)6.2 Scanning Direction (14)6.3 TFT-LCD Interface Signal Description (15)6.4 The Input Data Format (16)6.5 TFT-LCD Interface Timing (17)6.6 Power ON/OFF Sequence (18)7. Connector & Pin Assignment (19)7.1 TFT-LCD Signal (CN1): LCD Connector (19)7.2 LED Backlight Unit (CN2): Backlight Connector (19)8. Reliability Test Criteria (20)9. Mechanical Characteristics (21)9.1 LCM Outline Dimension (Front View) (21)9.2 LCM Outline Dimension (Rear View) (22)10. Label and Packaging (23)10.1 Shipping Label (on the rear side of TFT-LCD display) (23)10.2 Carton Package (23)11 Safety (24)11.1 Sharp Edge Requirements (24)11.2 Materials (24)11.3 Capacitors (24)11.4 National Test Lab Requirement (24)Version and Date Page Old description New Description0.0 2009/02/03All First Edition1. Operating Precautions1) Since front polarizer is easily damaged, please be cautious and not to scratch it.2) Be sure to turn off power supply when inserting or disconnecting from input connector.3) Wipe off water drop immediately. Long contact with water may cause discoloration orspots.4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped onhard surface.6) To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before handlingTFT-LCD Module.7) Do not open nor modify the module assembly.8) Do not press the reflector sheet at the back of the module to any direction.9) In case if a module has to be put back into the packing container slot after it was takenout from the container, do not press the center of the LED light bar edge. Instead, press at the far ends of the LED light bar edge softly. Otherwise the TFT Module may be damaged.10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nortilt the Interface Connector of the TFT Module.11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in avery short time. Please design your display product well to avoid external force applying to module by end-user directly.12) Small amount of materials without flammability grade are used in the TFT-LCD module. TheTFT-LCD module should be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be applied exemption.13) Severe temperature condition may result in different luminance, response time and lampignition voltage.14) Continuous operating TFT-LCD display under low temperature environment may acceleratelamp exhaustion and reduce luminance dramatically.15) The data on this specification sheet is applicable when LCD module is placed in landscapeposition.16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to usescreen saver or shuffle content periodically if fixed pattern is displayed on the screen.2. General DescriptionThis specification applies to the Color Active Matrix Liquid Crystal Display G104VN01 V1composed of a TFT-LCD display, a driver and power supply circuit, and a LED backlight system. The screen format is intended to support VGA (640(H) x 480(V)) screen and 16.2M (RGB 8-bits) or 262k colors (RGB 6-bits).LED driving board for backlight unit is included in G104VN01 V1 and the LED unit is replaceable.All input signals are LVDS interface and compatible with G104SN02 V1.G104VN01 V1 designed with wide viewing angle; wide temperature and long life LED backlight is well suited for industial applications. G104VN01 V1 is a RoHS product.2.1 Display CharacteristicsThe following items are characteristics summary on the table under 25 ℃ condition: ItemsUnitSpecifications Screen Diagonal [inch] 10.4Active Area [mm] 211.2 (H) x 158.4 (V) Pixels H x V 640 x 3(RGB) x 480 Pixel Pitch [mm] 0.33 x 0.33Pixel Arrangement R.G.B. Vertical Stripe Display ModeTN, Normally White Nominal Input Voltage VDD [Volt] 3.3 (typ.) Typical Power Consumption [Watt] 5.4WAll black pattern Weight [Grams] 390 (typ.)Physical Size [mm] 243.0(H) x 176.6(V) x 8.0(D) (typ.) Electrical Interface 1 channel LVDS Surface Treatment Anti-glare, Hardness 3H Support Color16.2M / 262K colors Temperature Range OperatingStorage (Non-Operating) [o C] [o C]-30 to +85 -30 to +85 RoHS ComplianceRoHS Compliance2.2 Optical CharacteristicsThe optical characteristics are measured under stable conditions at 25 (Room Temperature):℃Item Unit Conditions Min. Typ. Max. Remark White Luminance[cd/m2] I F = 80mA/1 LED Line (center point) 330 450 -Note 1 Uniformity % 5 Points 75 - -Note 2, 3 Contrast Ratio500 700 - Note 4[msec]Rising - 10 20 [msec] Falling- 20 30 Response Time[msec] Raising + Falling - 30 50 Note 5 [degree] [degree] Horizontal (Right) CR = 10 (Left) 70 70 80 80 - - Viewing Angle[degree] [degree]Vertical (Upper) CR = 10 (Lower) 50 70 60 80 - - Note 6 Red x TBD TBD TBD Red y TBD TBD TBD Green xTBD TBD TBD Green y TBD TBD TBD Blue x TBD TBD TBD Blue y TBD TBD TBD White x 0.26 0.31 0.36 Color / ChromaticityCoordinates (CIE 1931)White y0.28 0.33 0.38 Color Gamut%-45-Note 1: Measurement method Equipment Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent) Aperture1with 50cm viewing distance ∘Test Point CenterEnvironment < 1 luxModule Driving EquipmentNote 2: Definition of 5 points position (Display active area: 211.2mm (H) x 158.4mm (V))Note 3: The luminance uniformity of 5 points is defined by dividing the minimum luminance values by the maximum test point luminanceNote 4: Definition of contrast ratio (CR):Note 5: Definition of response time:The output signals of photo detector are measured when the input signals are changed from “White” to “Black” (falling time) and from “Black” to “White” (rising time), respectively. The response time interval isNote 6: Definition of viewing angleViewing angle is the measurement of contrast ratio10, at the screen center, over a 180° horizontal an d ≧180° vertical range (off-normal viewing angles). Th e 180° viewing angle range is broken down as below: 90° (θ) horizontal left and right, and 90° (Φ) vertical high (up) and low (down). The measurement direction is typically perpendicular to the display surface with the screen rotated to its center to developMinimum Brightness of five pointsδW9 = Maximum Brightness of five points Contrast ratio (CR)=Brightness on the “White” stateBrightness on the “Black” statethe desired measurement viewing angle.3. Functional Block DiagramThe following diagram shows the functional block of the 10.4 inch color TFT/LCD module:4. Absolute Maximum Ratings4.1 Absolute Ratings of TFT LCD ModuleItem Symbol Min Max Unit Logic/LCD Drive Vin -0.3 +4.0 [Volt]4.2 Absolute Ratings of EnvironmentItem Symbol Min Max Unit Operating Temperature TOP -30 +85 [o C] Operation Humidity HOP 5 95 [%RH] Storage Temperature TST -30 +85 [o C] Storage Humidity HST 5 95 [%RH] Note: Maximum Wet-Bulb should be 39℃ and no condensation.5. Electrical Characteristics 5.1 TFT LCD Module5.1.1 Power SpecificationSymbol Parameter Min Typ Max Units RemarkVDD Logic/LCD Input Voltage 3.0 3.3 3.6 [Volt]I VDD LCD Input Current - 280 - [mA]VDD=3.3V at 60 HZ, all Black PatternP VDD LCD Power comsumption - 0.924 - [Watt] VDD=3.3V at 60 HZ, all Black Pattern I rush LCDLCD Inrush Current-- 1.5[A] Note 1; VDD=3.3VBlack Pattern, Rising time=470usVDD rpAllowable Logic/LCDDrive Ripple Voltage- -100[mV] p-pVDD=3.3V at 60 HZ, all Black PatternNote 1: Measurement condition:VDD rising time0V3.3V5.1.2 Signal Electrical CharacteristicsInput signals shall be low or Hi-Z state when VDD is off.Note: LVDS Signal Waveform.Symbol ItemMin. Typ. Max. UnitRemarkVTH Differential Input High Threshold - - 100 [mV] VCM=1.2V VTL Differential Input Low Threshold 100 - - [mV] VCM=1.2V ｜VID ｜ Input Differential Voltage100 400 600 [mV] VICMDifferential Input Common Mode Voltage1.1-1.45[V]VTH/VTL=+-100mV5.2 Backlight Unit5.2.1 Parameter guideline for LCDFollowing characteristics are measured under a stable condition using a inverter at 25℃. (Room Temperature):Symbol Parameter Min.Typ.Max.Unit RemarkVCC Input Voltage 10.8 12 12.6 [Volt]I VCC Input Current - 0.37 - [A] 100% PWM DutyP LED Power Consumption - 4.44 TBD [Watt] 100% PWM DutyI rush LED Inrush Current - - TBD [A] at rising time=470usF PWM Dimming Frequency 200 - 20K [Hz]Swing Voltage 3 3.3 5.5 [Volt]Dimmung duty cycle TBD - 100 %Operation Life 50,000 - - Hrs I F=80mA, Ta= 25o CNote 1: Ta means ambient temperature of TFT-LCD module.Note 2: I F means LED unit forward current.Note 3: VCC, I VCC, I rush LED, P VCC are defined for LED backlight.(100% duty of PWM dimming)Note 4: If G104SN02 V2 module is driven by high current or at high ambient temperature & humidity condition. The operating life will be reduced.Note 5: Operating life means brightness goes down to 50% initial brightness. Minimum operating life time is estimated data.6. Signal Characteristics6.1 Pixel Format ImageFollowing figure shows the relationship between input signal and LCD pixel format.1st2nd639th640th1stLine480thLine6.2 Scanning DirectionThe following figures show the image seen from the front view. The arrow indicates the direction of scan.Fig. 1 Normal scan (Pin4, DPS = Low or NC) Fig. 2 Reverse scan (Pin4, DPS = High)6.3 TFT-LCD Interface Signal DescriptionThe module using a LVDS receiver embaded in AUO’s ASIC. LVDS is a differential signal technology for LCD interface and a high-speed data transfer device.Input Signal Interface Pin No. SymbolDescription 1 VDD Power Supply, 3.3V (typical) 2 VDD Power Supply, 3.3V (typical) 3 GND Ground4 DPS Reverse Scan Function [H: Enable; L/NC: Disable]5 RxIN0-6 RxIN0+ LVDS receiver signal channel 0LVDS Differential Data Input (R0, R1, R2, R3, R4, R5, G0) 7 GNDGround8 RxIN1- 9 RxIN1+ LVDS receiver signal channel 1LVDS Differential Data Input (G1, G2, G3, G4, G5, B0, B1) 10 GND Ground11 RxIN2- 12 RxIN2+ LVDS receiver signal channel 2LVDS Differential Data Input (B2, B3, B4, B5, HS, VS, DE)13 GNDGround14 RxCLKIN- 15 RxCLKIN+ LVDS receiver signal clock 16 GND Ground17 RxIN3-18 RxIN3+ LVDS receiver signal channel 3, NC for 6 bit LVDS InputLVDS Differential Data Input (R6, R7, G6, G7, B6, B7, RSV)19 RSVReserved for AUO internal test. Please treat it as NC.20SEL68 6/ 8bits LVDS data input selection [H: 8bits L/NC: 6bit]Note 1: Input Signals shall be in low status when VDD is off.Note 2: High stands for “3.3V”, Low stands for “0V”, NC stands for “No Connection”. Note 3: RSV stands for “Reserved”.6.4 The Input Data Format6.4.1 SEL68SEL68 =“Low” or “NC” for 6 bits LVDS InputSEL68 = “High” for 8 bits LVDS InputNote1: Please follow PSWG.Note2:R/G/B data 7:MSB, R/G/B data 0:LSB Signal Name DescriptionRemarkR7 R6 R5 R4 R3 R2 R1 R0 Red Data 7Red Data 6Red Data 5Red Data 4Red Data 3Red Data 2Red Data 1Red Data 0Red-pixel DataFor 8Bits LVDS inputMSB: R7 ; LSB: R0For 6Bits LVDS inputMSB: R5 ; LSB: R0G7 G6 G5 G4 G3 G2 G1 G0 Green Data 7Green Data 6Green Data 5Green Data 4Green Data 3Green Data 2Green Data 1Green Data 0Green-pixel DataFor 8Bits LVDS inputMSB: G7 ; LSB: G0For 6Bits LVDS inputMSB: G5 ; LSB: G0B7 B6 B5 B4 B3 B2 B1 B0 Blue Data 7Blue Data 6Blue Data 5Blue Data 4Blue Data 3Blue Data 2Blue Data 1Blue Data 0Blue-pixel DataFor 8Bits LVDS inputMSB: B7 ; LSB: B0For 6Bits LVDS inputMSB: B5 ; LSB: B0RxCLKIN LVDS Data ClockDE Data Enable Signal When the signal is high, the pixel datashall be valid to be displayed.Note: Output signals from any system shall be low or Hi-Z state when VDD is off.NS-like format6.5 TFT-LCD Interface Timing6.5.1 Timing CharacteristicsSignal Symbol Min. Typ. Max. Unit Clock Frequency 1/ T Clock 20 25.2 28.33 MHzPeriod T V 520 525 560 Active T VD -- 480-- Vertical SectionBlankingT VB 40 45 80 T Line Period T H 770 800 900 ActiveT HD-- 640 -- Horizontal SectionBlankingT HB 130160260T ClockNote 1: Frame rate is 60 Hz. Note 2: DE mode.6.5.2 Input Timing DiagramDOTCLKDEHDET VDInput Timing Definition ( DE Mode)Input Data Invaild Data Invaild Data6.6 Power ON/OFF SequenceVDD power and lamp on/off sequence is as below. Interface signals are also shown in the chart. Signals from any system shall be Hi-Z state or low level when VDD is off.Power ON/OFF sequence timingValueParameterUnitsMin. Typ. Max.T10.5 - 10 [ms]T2 30 40 50 [ms]T3 200 - - [ms]T4 10 - - [ms]T5 10 - - [ms]T6 0 - - [ms]T7 10 - - [ms]T8 100 - - [ms]T9 0 16 50 [ms]T10 - - 10 [ms]T11 1000 - - [ms]The above on/off sequence should be applied to avoid abnormal function in the display. Please make sure to turn off the power when you plug the cable into the input connector or pull the cable out of the connector.7. Connector & Pin AssignmentPhysical interface is described as for the connector on module. These connectors are capable of accommodating the following signals and will be following components.7.1 TFT-LCD Signal (CN1): LCD ConnectorConnector Name / Designation Signal ConnectorManufacturer STM or compatibleConnector Model Number MSB24013P20HA or compatibleAdaptable Plug P24013P20 or compatiblePin No. Symbol Pin No. Symbol1 VDD2 VDD3 GND4 DPS5 RxIN0-6 RxIN0+7 GND 8 RxIN1-9 RxIN1+ 10 GND11 RxIN2- 12 RxIN2+13 GND 14 RxCKIN-15 RxCKIN+ 16 GND17 RxIN3- 18 RxIN3+19 RSV 20 SEL687.2 LED Backlight Unit (CN2): Backlight ConnectorConnector Name / Designation Lamp ConnectorManufacturer ENTERY or compatibleConnector Model Number 3808K-F05N-02R or compatibleMating Model Number H208K–P05N-02B or compatiblePin No. symbol descriptionPin1 VCC 12V inputPin2 GND GNDPin3 On/OFF 5V-ON,0V-OFFPin4 Dimming PWMPin5 NA8. Reliability Test CriteriaItems Required Condition Note Temperature Humidity Bias 40℃, 90%RH, 300 hoursHigh Temperature Operation 85℃, 300 hoursLow Temperature Operation -30℃, 300 hoursHot Storage 85,℃ 300 hoursCold Storage -30,℃ 300 hoursThermal Shock Test -20/℃ 30 min, 60/℃ 30 min, 100cycles, 40℃ minimun ramp rateHot Start Test 85℃/ 1Hr min. power on/off per 5 minutes, 5 timesCold Start Test -30℃/ 1Hr min. power on/off per 5 minutes, 5 timesShock Test (Non-Operating) 50G, 20ms, Half-sine wave, ( ±X, ±Y, ±Z)Vibration Test (Non-Operating) 1.5G, (10~200Hz, Sine wave)30 mins/axis, 3 direction (X, Y, Z)On/off test On/10 sec, Off/10 sec, 30,000 cyclesESD Contact Discharge: ± 8KV, 150pF(330Ω) 1sec, 8 points, 25 times/pointAir Discharge: ± 15KV, 150pF(330Ω ) 1sec, 8 points, 25 times/ pointNote 1EMI 30-230 MHz, limit 40 dBu V/m, 230-1000 MHz, limit 47 dBu V/mNote1: According to EN61000-4-2, ESD class B: Some performance degradation allowed. No data lost Self-recoverable. No hardware failures.Note2:Water condensation is not allowed for each test items.Each test is done by new TFT-LCD module. Don’t use the same TFT-LCD module repeatedly for reliability test. The reliability test is performed only to examine the TFT-LCD module capability.To inspect TFT-LCD module after reliability test, please store it at room temperature and room humidity for 24 hours at least in advance.工业液晶屏ｗｗｗ．ｈｚｘｕｈｏｎｇ．ｃｏｍ工业液晶屏ｗｗｗ．ｈｚｘｕｈｏｎｇ．ｃｏｍ10. Label and Packaging10.1 Shipping Label (on the rear side of TFT-LCD display)10.2 Carton Package11 Safety11.1 Sharp Edge RequirementsThere will be no sharp edges or comers on the display assembly that could cause injury.11.2 Materials11.2.1 ToxicityThere will be no carcinogenic materials used anywhere in the display module. If toxic materials are used, they will be reviewed and approved by the responsible AUO toxicologist.11.2.2 FlammabilityAll components including electrical components that do not meet the flammability grade UL94-V1 in the module will complete the flammability rating exception approval process.The printed circuit board will be made from material rated 94-V1 or better. The actual ULflammability rating will be printed on the printed circuit board.11.3 CapacitorsIf any polarized capacitors are used in the display assembly, provisions will be made to keep them from being inserted backwards.11.4 National Test Lab RequirementThe display module will satisfy all requirements for compliance to:UL 60950 U.S.A. Information Technology Equipment。

In/On-Cell/OGS屏幕全面解析深圳鸿佳科技专注于中小尺寸TFT液晶显示屏、LCD液晶显示模块、触摸屏的研发、设计、生产和销售。

产品涵盖了TN、HTN、STN、FSTN、TFT、OLED、触摸屏等系列；其中TFT液晶屏主要有：1.77寸、2.0寸、2.0寸横屏、2.2寸、2.4寸、2.8寸、3.2寸、3.5寸、3.97寸、4.3寸、5寸、5.6寸、7寸、9.7寸、10.1寸等；黑白液晶屏主要有：字符、图形、中文字库等标准或非标准模块。

产品广泛应用于仪器仪表、医疗设备、电力设备、通讯设备、家用电器、工业控制、消费电子、POS 机、手持设备等多个领域。

关于屏幕概念的炒作，从之前的IPS、AMOLED、SLCD的面板之争，到现在清一色标榜自己是OGS全贴合屏幕，如何如何轻薄、透光、图像“浮现”在屏幕上，苹果则貌似更为“高端”，传出了In-cell/On-cell的概念。

煮机做这期关于OGS/In-Cell/On-Cell屏幕的科普，力求通俗易懂，望以最简单的方式让大家了解真相。

要彻底了解In-Cell/On-Cell/OGS等等屏幕，就得先知道屏幕的基本结构组成。

从上到下，屏幕的基本结构分为三层，保护玻璃（最上面橙黄色标注了Cover glass的部分），触控层（图中一点点淡蓝色虚线，标注了X、Y的部分)，显示面板。

保护玻璃没什么好说的，康宁大猩猩玻璃就是。

触控层的话，就是由ITO触控薄膜和ITO玻璃基板组成。

显示面板可细分的程度高，这里只大致排列下：从上到下，分别是上玻璃基板（粉红色标注了Color filiter的区域，即彩色滤光基板），液晶层（蓝条），下玻璃基板（粉红色标注了Array的区域，即薄膜电晶体基板）。

最后，还需要指出的是，保护玻璃/触控层与显示面板之间，一般贴合技术会形成一层空气（即图中标注了Bonding的金黄色区域），如果采用全贴合技术去除这层空气，屏幕反光会大大减少，点亮屏幕时就显得更为通透，熄屏时更加黑沉，没有灰白的观感。

目錄第1章概要 (1)1.1.規格介紹 (1)1.2.尺寸圖 (2)1.3.乙太網路埠 (3)1.4.CR1225 電池 (3)1.5.電源連接 (3)1.6.操作環境 (3)第2章系統裝置設定 (4)2.1.資訊 (4)2.2.一般屬性 (5)2.3.語言設定 (5)2.4.輸入方式 (6)2.5.時間/日期 (6)2.6.網路 (6)2.7.cMT-SVR 系統設定 (7)第3章cMT Viewer App 介紹 (8)3.1.圖示功能介紹 (8)3.2.如何載入工程檔案至cMT-iV5 (9)3.3.如何切換已連接的cMT-SVR (11)第4章韌體, OS 更新 (12)4.1.更新cMT Viewer (12)4.2.更新OS (13)第1章 概要1.1. 規格介紹雲端人機介面 特點● 9.7" 1024 x 768 TFT LCD, LED 背光 ● 無風扇冷卻系統● 內建 512 MB 快閃記憶體 ● 一個 Gigabit 乙太網路埠 ● 內建揚聲器 ● 內建電源隔離● 專為連接cMT-SVR 設計1.2. 尺寸圖32.7m m [116mm [R0.63"]7.9m m [0.1.3.乙太網路埠提供一個10/100/1000M Gigabit 的乙太網路埠，其指示燈分別表示：橘色LED: LAN 連接狀態綠色LED: Active 通訊狀態連接乙太網路，請使用CAT-6網路連接線。

1.4.CR1225 電池cMT-iV5 內裝一個銅板型的CR1225 鋰電池來保持時鐘的運轉。

電池規格：CR1225 3V 鋰電池。

1.5.電源連接電源：此產品只能採用直流電源供電，規定的直流電壓範圍為24±20%V，和大多數直流供電系統相容。

產品內部的電源調節電路是由開關電源完成的，最高的啟動峰值電流可以達到500mA。

注意：請將電源的正極接到標有'+' 的端子上，直流的地則接到標有'-' 的端子上。

换屏必备：笔记本液晶屏型号可互换可兼容汇总摘要: 首先让我们学会看液晶屏的型号：以M140NWR2为例; M 代表液晶屏的品牌，常用的品牌有：友达B 三星LTN龙腾M奇美N中华CLAA瀚彩HSD LG LP 等等。

其中140代表尺寸，为14.0英寸，比如LTN156AT02，即为三星15.6英寸的 ...首先让我们学会看液晶屏的型号：以M140NWR2为例; M 代表液晶屏的品牌，常用的品牌有：友达B 三星LTN 龙腾M 奇美N 中华CLAA瀚彩HSD LG LP 等等。

其中140代表尺寸，为14.0英寸，比如LTN156AT02，即为三星15.6英寸的屏幕。

至于屏幕具体的参数，大家可以到屏库这个网站搜索一下，如图所示，能知道液晶屏具体分辨率，尺寸，接口以下是各尺寸液晶屏可代用和兼容型号10.1超薄led液晶屏CLAA101WB03 LP101WH2 TLA2 M101NWT2R0 B101EW01 B101AW06 LTN101NT05 LP101WSBB101AW06 V.1 N101L6-L0D N101LGE-L41 LTN101NT08 HSD101PFW4左右螺丝孔的，10.1寸LED 超薄液晶屏都通用的。

（10.1超薄led，高分屏和普分屏有些机器不支持互换）华硕EPC X101CH笔记本X101H笔记本B101AW06V.4 N101L6-L0D华硕EPC 700 701华硕1008HA 1008HD 联想S100 S110 M13S105 S10 S10E S10-2宏基D255E D257 D260 ACER 宏基PAV70KAV70 方正R100神舟S500华硕EPC 1008P 1025C11.6超薄led液晶屏LTN116AT06 N116BGE-L32 CLAA116WA03A LP116WH2 LTN116AT02 LTN116AT04N116BGE-L41 N116B6-L04 M116NWR1 B116XW03 V.2 B116XW03 V.3 B116XW01 V.0 华硕1225b 1225C X201 X201E 惠普dm1-1119TU dm1-1023TUdm1-1022TU 联想ThinkPad E120 E135 E125 X121E X130E U150 U160S206HP 明基U121戴尔P03T M101Z 戴尔Inspiron 11z DELL戴尔InspironM101z-1120 M11X P03T M102Z 索尼PCG-31311T 31311W 31211T13.3超薄led液晶屏b133xtn01.0 B133XW01 V.0 B133XW01 V.1 B133XW01 v.2 B133XW01v.4 B133XW01 v.5 LP133WH2 LTN133AT27 CLAA133WA01A B133XW03V.0B133XW03 V.1 B133XW03 v.4 B133XW03v.5 N133BGE-L41 N133BGE-L31 LTN133AT16 B133XTN01.0 ltn133at20联想U350 V360 E30 E3 V370 Z370 G370 E320 E325 U360 Y370 U310 V370GZ380 S300 E30 E31华硕UL30 UX30A U31J U35J UL30A SONY S138EC/b S125EC/p S13S9CS118EC/BSONYVPCSD100C VPCSD200C VPCSD300C VPCSD400CSONYVPCS115EC VPCS118EC VPCS119 VPCS119GC VPCS115FG14.0led中厚度液晶屏LP140WH1 B140XW01 HSD140PHW1 N140B6 LTN140AT02 LTN140AT04 HT140WXBHB140WX1 LTN140AT07 BT140GW01 LTN140AT01 LP140WH4 N140BG EM140NWR2 LTN140AT16 LTN140AT22 LTN140AT26 LTN140AT19 B140XW04联想G450 G455 Y450 B450L SL410K G460 E40 B460 B470 B490 B480 G470 G475 B465 Z460 Z470 G465 E430 G460E G480 G485 N480 G400 G450L SL410 E45 B465C Y460C Z475 Z470A B4303 B4305 B4306 B4307 B4308 B4309 B4310 B4311三星：6478 Q430 P428 R42P R467 R468 R463 R470 R440 R420 R464 R428 R430 R425 R423 R439 R429 RV410 RV411 RV415 RV420 R478 R480 E3415 E3420RV408 RV409惠普：CQ42 CQ42X G42 G41 G42 X42 CQ511 CQ510 CQ510CQ541 4411S 4416S 516 515戴尔：M4040 N4010 N4020 N4030 N4050 N4110 N4120 1088 1440 1014 1464 1045 PP42L N4010 1450 1410 N4050 M4020东芝：L600 L630 L535 L538 L537 L551 C600 L510 L700 M503 M505M506 L645华硕：A43SJ X43SJ A42JZ A40JZ X43U X8DIJ F81S X8E X8AC N82X84H X85 K40 K41 K42 X42J K40IN K40I A41E A42E A42J X43S P42A40 N43 A41 K41V K42E X43B X8A X85S A41I X87 F81 F81E X85E K45VDX44H宏基：4741G 4736ZG 4739Z 4743G 4750G 4738ZG 4752 4755G 47414736G 4738G 4835G 4745G 4740G 4735Z 4741Z 4540G 4540 4551G D730 D725 D728 D52514.0led超薄液晶屏LTN140AT06 LTN140AT11 LTN140AT08 LP140WH2 LP140WH3 LTN140AT 20 B140XW03 LTN140AT12 B140XTN02.0 N140B6-L06 N140BGE-L41 H B140WX1-300联想Y460 Y470N U460 Y480A S400 S405 S420 Y470 E420 U410Y480 Y470 Y480 V460 Y471 E425 U400 U410 E460A E42S E430 E425ST420I T420S三星R418 NP300E4A 305v4A 305E4A方正R430IG R430华硕ASUS X401a UL80 U45 X401宏基ACER 4810T AS4820 4820T戴尔V3300V3400 3400 Vostro 3400 清华同方K41H K46A K47A K468 K469 K485X46 K466索尼PCG-61113T PCG-61212T W PCG-61211T15.6led液晶屏B156XW02V2 HT156WXB LP156WH2 LTN156AT02 N156BGE-L21 LP156WH4 LTN15 6AT05 LP156WD1 LTN156AT24LTN156AT09 LTN156AT05 LP156WH2 N156B6-L02/L04/L06 BT156GW01HT156WXBB156XTN02.2 HT156WXB 华硕A53S X53S K53SJ K52DA55XI G51J X54H K51 X56 A53 K54 X55V A55N53SV N53JF VX53SJX53U A53 A53X K53 K53X X54 X54E N53 K50 K52 K53SC K53TK P53 N53 X53S A53SV联想z565 G570 G580 E50 E520 E525 SL510 Z570 B570 V570 B560A V560 Z560 B550 G550 W510 W520 Y560P W510 T510 SL510 G590 G565 V570 G575 G580 G585 Thinkpad E520 E525 E535三星R518 R522 R523 R538 RV515 R528东芝L650 L650D C655 C650 C660 A660 L750 L400 L850惠普HP 4520S DV6 CQ60 CQ61 CQ62 4515s 4525s 4510s戴尔I1555 I1545 F414J M5010 M5030 1545 1555 1564 1556 M5110 M5010 N5110 N5010 N5020神舟K580 A560P K580 K580S K580P宏基ACER 5536 5745 5810T 5820 5742G 5830T 5749 5750g5760 5742 5740G 5935ZG 5538ZG 5738索尼VPCEH-112T VPCEH-111T15.6led超薄液晶屏N156BGE-LB1 B156XW03 LP156WH3 N156B6-L0D B156XW04 LTN1 56AT20 B156XTN03.2 LTN156AT11 N156BGE-L41 CLAA156WA15A LT N156AT29 宏基:5820T 5810T 5820 5625G V5-551 571 MS2361 572 5820TZ 5820TG 5810tz M3-581TG联想:y560 U550 Z500 S5华硕:X501 X501A X501A1X501U K56 S56 K56C X501A A56C X550戴尔:15Z-1569 15r 5521 5523 1528惠普：Envy 6 1215 1001 1005TX 1016TX dv6-7002tx 7045tx g6-1303tx索尼：SVE15 E15118 E15116 SVE15117FJP 微星：MSI X60015 .4 LCD 液晶屏LP154WX2 LP154WE2 LP154WX5 LTN154X3-L09 CLAA154WA05B154EW04 B154EW03 LTN154AT01 N154I5-L02 N154I2-L02 N154X3 LP154EW02LTN154WX2-L01 N154I1-L01 CLAA1154EW04 LP154WX4 LP154W01 B15 4EW08 B154EW01 B154EW02 N154I3-L02 LTN154X3-L02 LP154WX3 LP154W02 LTN154X1LTN154X9 LTN154X2 LTN154AT07 LTN154AT09 CLAA154WA01方正R511神州L3000D L350S L480T L525T L575T HP870宏基5100 5120 1692 3610 3613 E5670 5680 明基A51E A51 A52 A52E A82 A52E A53联想天逸F50 C510 3000 G530 F50A F51A Y810 Y800富士通M1450G AMILO PI2530华硕A6000 X1000 X1400 X53R X50Q X50C X50S X52S 戴尔D800D810 D820 D830 M60 M70 6000 8500 8600 希望对大家有帮助。

■Preliminary Specification□Final SpecificationModule 6.5 Inch Color TFT-LCD Model Name G065VN01 V2Customer DateChecked &Approved byNote: This Specification is subject to change without notice.Approved by DateDebbie Chiu 2009/04/23Prepared byDavid Hsing 2009/04/23 General Display Business Division / AU Optronics corporationContents1. Operating Precautions (4)2. General Description (5)2.1 Display Characteristics (5)2.2 Optical Characteristics (6)3. Functional Block Diagram (8)4. Absolute Maximum Ratings (9)4.1 Absolute Ratings (9)4.2 Absolute Ratings of Environment (9)5. Electrical Characteristics (10)5.1 TFT-LCD Driving (10)5.2 Backlight Unit Driving (12)6. Signal Characteristic (13)6.1 Pixel Format Image (13)6.2 Scanning Direction (13)6.3 The Input Data Format (14)6.4 TFT- LCD Interface Signal Description (15)6.5 TFT- LCD Interface Timing (16)6.6 LED Backlight Unit Interface Signal Description (17)6.7 Power ON/OFF Sequence (18)7. Connector & Pin Assignment (19)7.1 TFT- LCD Signal (CN1): LCD Connector (19)7.2 LED Backlight Unit (CN2): Backlight Connector (19)7.3 PIN 1 definition of CN1 and CN2 (20)8. Reliability Test Criteria (21)9. Mechanical Characteristics (22)10. Label and Packaging (23)10.1 Shipping Label (on the rear side of TFT-LCD display) (23)10.2 Carton Package (23)11 Safety (24)11.1 Keen Edge Requirements (24)11.2 Materials (24)11.3 Capacitors (24)11.4 National Test Lab Requirement (24)Version and Date Page Old description New Description Remark0.1, Apr. 23, 2009 All First edition preliminary specifications1. Operating Precautions1) Display area (Polarizer) of TFT-LCD Module is easily to be damaged, please be cautious and notto scratch it.2) Be sure to power off your machine before connecting or disconnecting your signal cable toTFT-LCD Module.3) Wipe off water drop on display area immediately. Long contact with water may causediscoloration or spots.4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.5) Display area (Glass) of TFT-LCD Module may be broken or cracked if bump Module against hardobject.6) To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before handlingTFT-LCD Module.7) Do not open nor modify the TFT-LCD module assembly.8) Do not press the reflector sheet at the back of the module to any direction.9) In case if TFT-LCD module has to be put back into the packing container slot after it was takenout from the container, do not press the center of the LED Reflector edge. Instead, press at the far ends of the LED Reflector edge softly. Otherwise the TFT-LCD Module may be damaged. 10) When inserting or removing of your signal cable to TFT-LCD Module, be sure not to applyabnormal force (rotate, tilt…etc.) to the Connector of the TFT-LCD Module.11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a veryshort time. Please design your display product well to avoid external force applying to module by end-user directly.12) Small amount of materials without flammability grade are used in the TFT-LCD module. TheTFT-LCD module should be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be applied exemption.13) Severe temperature condition may result in different luminance, response time.14) Continuous operating TFT-LCD Module under high temperature environment may accelerateLED light bar exhaustion and reduce luminance dramatically.15) The data on this specification sheet is applicable when TFT-LCD module is placed in landscapeposition.16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use screensaver or moving content periodically if fixed pattern is displayed on the screen.2. General DescriptionG065VN01 V2 is designed for industrial display applications with VGA (640 x RGB x 480) resolution and 16.2M (RGB 6-bits + FRC) or 262k colors (RGB 6-bits). It is composed of a TFT-LCD panel, driver ICs, control and power supply circuits board and a backlight unit including LED driving circuit. G065VN01 V2 offers LVDS interface for display signal input.2.1 Display CharacteristicsThe following items are G065VN01 V2 characteristics summary at 25 ℃(Room Temperature).Items Unit SpecificationsScreen Diagonal inch 6.5Active Area mm 132.48(H) x 99.36(V)Pixels H x V640x3(RGB) x 480Pixel Pitch mm 0.207 x 0.207Pixel Arrangement R.G.B. Vertical StripeDisplay Mode TN, Normally WhiteNominal Input Voltage VDD Volt 3.3 typ.Typical Power Consumption Watt 3.9W (LCD:0.9W/LED BLU: 3.0W) All black patternWeight Grams 170g (typ.)Physical Size mm 153.0(H)x 118.0(V) x 10.9(D) (typ.) Electrical Interface 1 channel LVDSSurface Treatment Glare, AR, Hardness: 3HSupport Color 16.2M / 262K colorsThe most suitable view angle 6 o’clockTemperature RangeOperatingStorage (Non-Operating) o Co C-30 to +85-30 to +85RoHS Compliance RoHS Compliance2.2 Optical CharacteristicsThe optical characteristics are measured under stable conditions at 25℃ (Room Temperature).ItemUnit Conditions Min. Typ. Max. Remark White Luminance cd/m2 F PWM = 100% (center point) 500 700 -Note 1 Uniformity% 5 Points -1.25 Note1, 2, 3 Contrast Ratio400 600 - Note 4msecRising - 15 20 msec Falling - 10 15 Response Timemsec Rising + Falling - 25 35 Note 5 degree degree Horizontal (Right) CR = 10 (Left) 70 70 80 80 - - Viewing Angledegree degreeVertical (Upper) CR = 10 (Lower) 60 60 70 70 - - Note 6 White x 0.263 0.313 0.363 White y 0.279 0.329 0.379 Red xTBD TBD TBD Red y TBD TBD TBD Green x TBD TBD TBD Green y TBD TBD TBD Blue x TBD TBD TBD Color / Chromaticity Coordinates (CIE 1931)Blue yTBD TBD TBD Color Gamut%-55-Note 1: Measurement methodEquipment Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent) Aperture1with 50cm viewing distance ∘Test Point Center Environment < 1 luxModule Driving EquipmentNote 2: Definition of 5 points position (Display active area: 132.48mm(W) x 99.36mm(H))Note 3:The luminance uniformity of 5 points is defined by dividing the maximum luminance value by the minimum luminance value at full white condition.Note 4: Definition of contrast ratio (CR):Note 5: Definition of response time:The output signals of photo detector are measured when the input signals are changed from “White” to “Black” (falling time) and from “Black” to “White” (rising time), respectively. The response time interval definition is between 10% and 90% of amplitude. Please refer to the figure as below.Maximum Brightness of five pointsδW5 = Minimum Brightness of five pointsContrast ratio (CR) =Brightness @ “White” state Brightness @ “Black” stateNote 6: Definition of viewing angleViewing angle is the measurement of contrast ratio ≧10, at the screen center, over 180° horizontal and 180° vertical range. The 180° horizontal (θL, θR) and 180° vertical (ΦH, ΦL) range are illustrated as following figure.3. Functional Block DiagramThe following diagram shows the functional block of the G065VN01 V2 color TFT/LCD module.4. Absolute Maximum Ratings4.1 Absolute RatingsItem Symbo Min Max Unit Remark Logic/LCD Drive Voltage VDD -0.3 +4.0 Volt Ta= 25o C LCD Input Signal Voltage VIN -0.3 +4.0 Volt Ta= 25o C LED BLU Drive Voltage V LED0 25 Volt Ta= 25o C LED Dimming Input VoltageV PWM0 6 Volt Ta= 25o C High4.2 Absolute Ratings of EnvironmentItem Symbol Min Max Unit Remark Operating Temperature TOP -30 +85℃Note 1, 2 Operation Humidity HOP 5 95 %RH Note 1, 2 Storage Temperature TST -30 +85 ℃Note 1Storage Humidity HST 5 95 %RH Note 1 Note 1: Maximum Wet-Bulb should be 39 and no condensa℃tion.Note 2: Only operation is guaranteed. Optical performance should be evaluated at 25℃ only.5. Electrical Characteristics5.1 TFT-LCD Driving5.1.1 Power SpecificationSymbolParameterMin Typ Max Units RemarkVDD Logic/LCD Drive Voltage 3.0 3.3 3.6VoltIDD VDD Current - 260 mA All Black Pattern (VDD=3.3V, at 60Hz) I rush LCD Inrush Current - - 1.5 A Note 1PDDVDD Power-0.86WattAll Black Pattern (VDD=3.3V, at 60Hz) VDDrp Allowable Logic/LCD Drive Ripple Voltage- - 100 mVp-pAll Black Pattern (VDD=3.3V, at 60Hz)Note 1: Measurement condition:VDD rising time0V3.3V5.1.2 Signal Electrical CharacteristicsInput signals shall be low or Hi-Z state when VDD is off. LVDS signal (Note 1)LVDS Transmitter: THC63LVDM83A (THINE) or equivalentNote 1: LVDS Signal Waveform.ParameterSymbol Min. Typ. Max. Unit RemarkDifferential Input High Threshold VTH - - 100 mV VCM=1.20V Differential Input Low ThresholdVTL -100 - - mV VCM=1.20V Input Differential Voltage｜VID ｜100 400 600 mVDifferential Input Common Mode Voltage VCM1.1-1.45V VTH, VTL= ±100mV5.2 Backlight Unit Driving5.2.1 Parameter guideline for LED driverFollowing characteristics are measured under stable condition at 25 (Ro℃om Temperature).Symbol Parameter Min Typ Max Units RemarkV LED Input Voltage 9 12 20 VoltI LED Input Current - 0.25 A 100% PWM dutyP LED Power Consumption - 3.0 W 100% PWM dutyI rush LED Inrush Current - TBD A 100% PWM dutyOn Control Voltage 3.3 VoltV LED On/OffOff Control Voltage 0 VoltDimming control Voltage High 3.0 3.3 5.5 VoltV PWMDimming control Voltage Low 0 0.1 VoltF PWM Dimming Frequency 200 30K HzD PWM Dimming duty cycle 1 100 %Operating Life 25000 50000 Hrs Note 2, 3Note 1: See Section 6.6 for LED Backlight Unit Interface Signal Description.Note 2: If G065VN01 V2 module is driven at high ambient temperature & humidity condition. The operating life will be reduced.Note 3: Operating life means brightness goes down to 50% initial brightness. Typical operating life time is estimated data.6. Signal Characteristic6.1 Pixel Format ImageFollowing figure shows the relationship between input signal and LCD pixel format.6.2 Scanning DirectionThe following figures show the image seen from the front view. The arrow indicates the direction of scan.Note 1: TFT-LCD interface signal description is shown in section 6.4.6.3 The Input Data FormatSEL68 = ”Low” or “NC” for 6 bits LVDS InputSEL68 = “High” for 8 bits LVDS InputSignal Name Description RemarkR7 R6 R5 R4 R3 R2 R1 R0 Red Data 7Red Data 6Red Data 5Red Data 4Red Data 3Red Data 2Red Data 1Red Data 0Red-pixel DataFor 8Bits LVDS inputMSB: R7 ; LSB: R0For 6Bits LVDS inputMSB: R5 ; LSB: R0G7 G6 G5 G4 G3 G2 G1 G0 Green Data 7Green Data 6Green Data 5Green Data 4Green Data 3Green Data 2Green Data 1Green Data 0Green-pixel DataFor 8Bits LVDS inputMSB: G7 ; LSB: G0For 6Bits LVDS inputMSB: G5 ; LSB: G0B7 B6 B5 B4 B3 B2 B1 B0 Blue Data 7Blue Data 6Blue Data 5Blue Data 4Blue Data 3Blue Data 2Blue Data 1Blue Data 0Blue-pixel DataFor 8Bits LVDS inputMSB: B7 ; LSB: B0For 6Bits LVDS inputMSB: B5 ; LSB: B0RxCLKIN LVDS Data ClockDE Data Enable Signal When the signal is high, the pixel data shall be valid to be displayed.RSV Reserved Signal “High” or “Low” is acceptable Note 1: Output signals from any system shall be low or Hi-Z state when VDD is off.6.4 TFT- LCD Interface Signal DescriptionNote 1: “Low” stands for 0V. “High” stands for 3.3V. “NC” stands for ”No Connection”.Pin No. Symbol Pin Description1 VDD Power supply, 3.3V (typical)2 VDD Power supply, 3.3V (typical)3 GND Ground4 SEL68 Selection for either 6bit or 8bit LVDS input:SEL68 =”Low” or “NC”, accepts 6bit LVDS data input; SEL68 = ”High”, accepts 8bit LVDS data input. 5 RxIN0- Negative LVDS differential input(R0-R5, G0) 6 RxIN0+ Positive LVDS differential input(R0-R5, G0) 7 GND Ground8 RxIN1- Negative LVDS differential input(G1-G5, B0-B1) 9 RxIN1+ Positive LVDS differential input(G1-G5, B0-B1) 10 GND Ground11 RxIN2- Negative LVDS differential input(B2-B5, Hsync, Vsync, DE) 12 RxIN2+ Positive LVDS differential input(B2-B5, Hsync, Vsync, DE) 13 GND Ground14 RxCLKIN- Negative LVDS differential clock input 15 RxCLKIN+Positive LVDS differential clock input 16 NC No connection17 U/D Vertical Reverse (“L” or Open: Normal, “H”: Reverse) 18 R/L Horizontal Reverse (“L” or Open: Normal, “H”: Reverse) 19 RxIN3- Negative LVDS differential input (R6-R7, G6-G7, B6-B7) NC for 6bit LVDS input.20RxIN3+Positive LVDS differential input (R6-R7, G6-G7, B6-B7) NC for 6bit LVDS input.6.5 TFT- LCD Interface Timing6.5.1 Timing Characteristics DE mode onlySignalSymbol Min. Typ. Max. Unit Remark Clock frequency (DOTCLK) 1/ T CLOCK 20 25.2 50 MHzNote1Period T H 770800 1070Active T HD 640 Horizontal SectionBlankingT HB 130 160 430 T CLOCKNote1Period T V 520 525 622Active TVD 480 Vertical SectionBlankingT VB40 45142 T LINENote1Note 1: Recommended frame rate is 60 Hz.6.5.2 Input Timing DiagramDOTCLKDEHT HBDET VDInput Timing Definition ( DE Mode)Input Data Invaild Data Invaild Data6.6 LED Backlight Unit Interface Signal DescriptionPin # Symbol Pin Description1 V LED12V input2 V LED12V input3 GND Ground4 GND Ground5 LED On/Off 3.3V-On; 0V-Off6 PWM DIM 1~100%6.7 Power ON/OFF SequenceVDD power, LCD interface signals and backlight on/off sequence are shown in the following chart. Signals from any system shall be Hi-Z state or low level when VDD is off.Power ON/OFF sequence timingValue UnitsParameterMin. Typ. Max.T10.5 - 10 msT2 30 40 50 msT3 200 - - msT4 10 - - msT5 10 - - msT6 0 - - msT7 10 - - msT8 100 - - msT9 0 16 50 msT10 - - 10 msT11 1000 - - msON/OFF sequence should be applied to avoid abnormal function in the display. Please make sure to turn off the power when you plug the cable into the input connector or pull the cable out of the connector.7. Connector & Pin Assignment7.1 TFT- LCD Signal (CN1): LCD ConnectorManufacturer STMConnector Model Number MSB24013P20, compatible with I-PEX 20268-020EMating Connecter Model Number Hirose DF19 -20S-1C or compatiblePin#Symbol Pin#Symbol1 VDD 11 RxIN2-2 VDD 12 RxIN2+3 GND 13 GND4 SEL68 14 RxCLKIN-5 RxIN0- 15 RxCLKIN+6 RxIN0+ 16 NC7 GND 17 U/D8 RxIN1- 18 R/L9 RxIN1+ 19 RxIN3-10 GND 20 RxIN3+7.2 LED Backlight Unit (CN2): Backlight ConnectorManufacturer STMConnector Model Number MS24016RHD, compatible with MOLEX 53261-0671 Mating Connecter Model Number STM P24016 or compatiblePin # Symbol Pin # Symbol1 V LED 4 GND2 V LED 5 LED ON/OFF3 GND 6 PWM DIM7.3 PIN 1 definition of CN1 and CN2G065VN01 V2 8. Reliability Test CriteriaItems Required Condition Remark Temperature Humidity Bias 40/90%,300Hr℃Note 2 High Temperature Operation 85,300Hr℃Note 2 Low Temperature Operation -30,300Hr℃Note 2 High Temperature Storage 85,300 hours℃Note 2 Low Temperature Storage -30℃,300 hours Note 2 Thermal Shock Test -20℃/30 min ,60℃/30 min ,100cycles Note 2 Hot Start Test 85℃/1 Hr (min.), power on/off per 5 minutes, repeat 5 times Note 2 Cold Start Test -30℃/1 Hr (min.), power on/off per 5 minutes, repeat 5 times Note 2 Shock Test(Non-Operating) 50G,20ms,Half-sine wave, (±X, ±Y, ±Z) Note 2 Vibration Test(Non-Operating) 1.5G, 10~200~10Hz, Sine wave, 30mins/axis, 3 direction (X, Y, Z) Note 2ESD Contact Discharge: ±8KV, 150pF(330Ω) 1sec, 8 points, 25 times/pointAir Discharge: ±15KV, 150pF(330Ω) 1sec, 8 points, 25 times/pointNote 1,2Attitude Test Operating: 14,000 ft, Ramp: 2000 ft/min, 8hrsNon-operating: 40,000 ft, Ramp: 2000 ft/min, 24hrsNote 2Note1: According to EN61000-4-2 ESD class B criteria, some performance degradation is allowed. TFT-LCD module is self-recoverable, no data lost and no hardware failures after test.Note2:Water condensation is not allowed for each test items.Each test is done by new TFT-LCD module. Don’t use the same TFT-LCD module repeatedly for reliability test. The reliability test is performed only to examine the TFT-LCD module capability.To inspect TFT-LCD module after reliability test, please store it at room temperature and room humidity for 24 hours at least in advance.9. Mechanical Characteristics10. Label and Packaging10.1 Shipping Label(on the rear side of TFT-LCD display)10.2 Carton PackageMax. capacity: 80 TFT-LCD module per carton (40pcs * 2 layers) Max. weight: 16.6 kg per cartonOutside dimension of carton: 425(L)mm* 386(W)mm* 430(H)mm11 Safety11.1 Keen Edge RequirementsThere will be no keen edges or corners on the display assembly that could cause injury.11.2 Materials11.2.1 ToxicityThere will be no carcinogenic materials used anywhere in the TFT-LCD module. If toxic materials are used, they will be reviewed and approved by the responsible AUO toxicologist.11.2.2 FlammabilityAll components including electrical components that do not meet the flammability grade UL94-V1 in the TFT-LCD Module will complete the flammability rating exception approval process.The printed circuit board will be made from material rated 94-V1 or better. The actual UL flammability rating will be printed on the printed circuit board.11.3 CapacitorsIf any polarized capacitors are used in the TFT-LCD module, provisions will be made to keep them from being inserted backwards.11.4 National Test Lab RequirementThe TFT-LCD Module will satisfy all requirements for compliance to UL 60950 (U.S.A. Information Technology Equipment).。

KEY FEATURESMODELS60LB6100 60” CLASS (59.5” diagonal)55LB6100 55” CLASS (54.6” diagonal)50LB6100 50” CLASS (49.5” diagonal)47LB6100 47” CLASS (46.9” diagonal)PICTURE QUALITY -Full HD 1080p Resolution -MCI 480 (60LB6100) -MCI 240 (55/50/47LB6100) -Triple XD Engine LG SMART TV -Premium VOD Services-Netflix, Hulu Plus, Youtube and more CONNECTIVITY -Wi-Fi® Built-in -3 HDMI® Connections -3 USB Connections -1 Component In-1 Shared Composite in (AV)AUDIO-2Ch Speaker System -20W Output Power -Sound SyncENERGY STAR® QUALIFIED-60LB6100, 55LB6100 and 50LB61001080p Smart HDTVThe LG LB6100 Smart TV lets you enjoy the best of the Internet directly to your TV. From partners like Netflix, YouTube, Hulu Plus and more, you’ll have all access to the content that both you and your family will love. This Full HD 1080p, LED TV delivers nearly double the resolution of standard HD all in amazing color and detail. Not only does the LED deliver a vibrant picture, it also helps give the TV a slim bezel, making this TV the ideal centerpiece in your living room.PRODUCT HIGHLIGHTSMCI 480 (60” only)Fast moving images look crystal clear, so it is easier to keep up with sports and video games.MCI 240 55/50/47”LED BACKLIGHTINGLED makes TVs slimmer, while alsodelivering amazing brightness, clarity and color detail.FULL HD 1080PSee the best that HDTV has to offer with the outstanding picture quality of Full HD 1080p Resolution.1080p Smart HDTVRemote ControlStandard© 2015 LG Electronics USA, Inc. All rights reserved. “LG Life’s Good” is a registered trademark of LG Corp. Allother product and brand names are trademarks or registered trademarks of their respective owners. Design,features and specifications are subject to change without notice. Non-metric weights and measurements areapproximate. Some features may require Internet access. Content and services may vary by product and aresubject to change without notice. Stand design may vary. 11/04/15。

Supports various systemsappend the following lines to the config.txt file which is located in the root of your TF card:max_usb_current=1hdmi_group=2hdmi_mode=87hdmi_cvt 800 480 60 6 0 0 0hdmi_drive=1You must make sure that there are no spaces on either side of the equal sign.Save and connect the TF card to your Pi then power up.(Touch input working well means that the LED firmware is Rev2.1. If the LCD firmware is 1.1, see#About LCD revision)Note: Resolution of Ubuntu Mate OS or Windows 10 IoT Core OS can also be set properly by editing config.txt.Calibration in RaspbianIf a latest Raspbian OS is in used, you should connect your Pi to the internet and install xserver-xorg-input-evdev.sudo apt-get install xserver-xorg-input-evdevJust be sure that evdev.conf has a higher number than 40-libinput.conf. For example, rename 10-evdev.conf to 45-evdev.conf. this forces evdev to load after libinput.sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.confsudo rebootThis LCD can be calibrated using a program called xinput_calibrator and you should get and install the program manually withsudo apt-get install -y xinput-calibratorEnter the following commands for touch screen calibration:sudo DISPLAY=:0.0 xinput_calibratoror select Menu -> Preferences -> Calibrate Touchscreen.After running these commands, there will be a prompt for four-point calibration shown in the LCD screen. Click the points one by one to finish the touch calibration. Then, the new calibration data will be displayed in the terminal, as shows below. Please get these data for future use.Doing dynamic recalibration:Setting new calibration data: 3919, 208, 236, 3913Enter the following command to edit 99-calibration.conf:sudo nano /etc/X11/xorg.conf.d/99-calibration.confThen, the old calibration data will be displayed in the terminal:Section "InputClass"Identifier "calibration"MatchProduct "ADS7846 Touchscreen"Option "Calibration" "160 3723 3896 181"Option "SwapAxes" "1"EndSectionModify the calibration data to the new calibration data displayed in the step 2):Section "InputClass"Identifier "calibration"MatchProduct "ADS7846 Touchscreen"Option "Calibration" "3919 208 236 3913"Option "SwapAxes" "1"EndSectionPress the keys Ctrl+X, and select the option Y to save the modification.The modification will be valid after rebooting the system. Enter the following command for system reboot:sudo rebootAbout LCD revisionAn LCD with Rev 2.1 firmware does not require any drivers, that is, touch function works properly without installing any software. So we did not provide any drivers and images for Rev 2.1 LCDs. The following drivers are only available for the LCD with Rev 1.1 firmware. But if you install the driver for the Rev 2.1 one, it will lead touch function not to work.Rev2.1 New FeaturesStandard HID protocol, easy to be integrated into your system.For the Raspberry Pi, supports Raspbian, Ubuntu Mate, single touch, and driver free.When work as a computer monitor, supports Windows 10/8.1/8/7, single points touch, anddriver free.Rev1.1 and beforeFor the Raspberry Pi, comes with Raspbian driver (works with your Raspbian directly), andUbuntu imageWhen work as a computer monitor, touch function is unavailableHow to distinguishGenerally speaking, a LCD shipped after June 2016 is often a Rev 2.1 one.Note: The only difference between Rev 1.1 and Rev 2.1 is the firmware, but hardware solutions, placement and routing are all the same. (PCB printings might be different due to different production batches.)You can verify the firmware by these steps:1. Using Raspberry Pi: Connect the LCD to your Pi (HDMI Port of LCD -> HDMI Port of Pi; USB Port of LCD -> USB Port of Pi; 5V~2A power supply). Download the image, e.g. Raspbian 2015-11-21 jessie or Raspbian 2015-05-05 wheezy, from Raspberry Pi web site (https:///downloads/). Write the image to a TF card and add the following code to the end of /boot/config.txt:max_usb_current=1hdmi_group=2hdmi_mode=87hdmi_cvt 800 480 60 6 0 0 0hdmi_drive=1You must make sure that there are no spaces on either side of the equal sign.Save and connect the TF card to your Pi then power up. If touch works, that means the firmware revision is Rev 2.1.2. Without Raspberry Pi: A PC (Windows 10/8.1/8/7) is required which cannot connect with other display device. Connect the LCD to your PC (USB Port of LCD -> USB Port of PC; HDMI Port of LCD -> HDMI Port of PC. Please first connect the USB Ports then connect the HDMI Port). If a new touch drive is recognized by Windows, that means the firmware revision is Rev 2.1. In this case, after the driver successfully installed, you can use the LCD as a human interface device.Detailed informationDepending on the firmware, please view the instructions of different revision:5inch HDMI LCD (B) (Firmware Rev 2.1) User Manual5inch HDMI LCD (B) (Firmware Rev 1.1) User Manual(Not support Raspberry Pi 3 Model B) ResourcesAn LCD with Rev 2.1 firmware does not require any drivers, that is, touch function works properly without installing any software. So we did not provide any drivers and images for Rev 2.1 LCDs. The following drivers are only available for the LCD with Rev 1.1 firmware. But if you install the driver for the Rev 2.1 one, it will lead touch function not to work.Raspbian Image (supports Rev 2.1 LCD)Raspbian boot up image (https:///open?id=0BxTkdrZQTN6kR0tLQ01tcldsMkE) (No difference from the official image except for config.txt)Raspbian Images (only support Rev 1.1 LCD)RPI3_RPI2_5.0_800x480_res_usb_touch_HID_2016-05-27-raspbian-jessie_4.4.13v7_20160620.7z (https:///uc?id=0B8Xjwnqc7XAMZk4yOE1nd05FY0U&export=download)RPI_B+_5.0_800x480_cap_usb_touch_2015-11-21-raspbian-jessie_4.1.13v7_20151215.img.7z(https:///file/d/0B0ay87Q7P7pfRzN1WmhYRlk0QjQ/view?usp=sharing) LCD Panel Dimension5inch HDMI LCD (B) panel dimension (/w/upload/e/e6/5inch-hdmi-lcd-%26-5inch-hdmi-lcd-b-panel-dimension.pdf)。