柯达preps5.3
- 格式:doc
- 大小:438.50 KB
- 文档页数:9
柯达全胜800III直接制版机柯达对开(8页)直接制版机:灵活的解决方案,全面满足用户业务要求柯达对开CTP设备具备高效、使用简单、成像质量高以及功能先进等优势,将全面满足任何规模印刷商的要求。
同时,柯达对开CTP直接制版机更在持续提升,保证为用户带来最先进的性能和最高产能。
无论基本型号还是自动化、高速设备,如若配备柯达方形光点(SQUAREspot)成像技术,那么每款对开直接制版机都是最为稳妥的投资,为用户带来极高的质量、可靠性,以及多种的输出形式。
全胜800III直接制版机:倍受肯定的可靠性和一致性柯达全胜800III(Kodak Trendsetter 800III)直接制版机秉承了柯达倍受肯定的对开CTP 一贯的坚固、耐用等优点,并在多个方面得到重大提升。
此系列直接制版机具备紧凑和可靠的特点,并可提供半自动化操作,稳定性高、维护简单,成像质量极高。
除了标准的热敏印版,全胜800III直接制版机可输出免冲洗印版和热敏菲林。
此系列制版机还可提供多种速度,最高每小时可生产42张印版。
全胜800III 直接制版机现在更添加新的软件和电气设备,令生产效率大大提升,不仅能满足今日生产印刷环境的要求,更可轻松应对明日的印刷挑战。
设备还可提供自动化选配项目,将用户的产能提升至极限。
如连续上版功能可在一张印版成像的同时,另一张印版已经准备妥当,等待自动上载和卸载,实现不间断制版,提高产量。
为了进一步提高效率,自动上版装置选项(可装载80 张印版)能让直接制版机在无人干预的情况下运行,进一步提高产量。
质量高,升级简单全胜800III直接制版机是高产能和高可靠性的代表。
由于设备是可扩展的设计,所以用户在今天的投资不仅能满足目前的生产环境,更可在未来业务发展之后升级到昆腾平台。
全胜800III昆腾直接制版机:方形光点成像技术和处理控制全胜800III昆腾(Trendsetter 800IIIQuantum)直接制版机配备了方形光点技术一此技术是精确、稳定印品的保证。
©Eastman Kodak Company, 2012January 2012 • CIS-289CURRENT INFORMATION SUMMARYCalibration Routines for KODAK PROFESSIONAL ENDURA Premier PaperGENERAL INFORMATIONKODAK PROFESSIONAL ENDURA Premier Paper isoptimized for digital printers. Significant testing has been done across a broad range of Kodak Professional and other manufacturers’ digital printers to validate satisfactory digital performance of KODAK PROFESSIONAL ENDURA Premier Paper.Kodak’s Printer Calibrations for KODAK PROFESSIONAL ENDURA Premier PaperT o achieve optimal quality prints on KODAKPROFESSIONAL ENDURA Premier Paper with Kodakdigital output devices such as the KODAK PROFESSIONAL Digital Multiprinter or the KODAK PROFESSIONAL LED II Printer, you must install new calibration files.The latest calibration files for Windows NT and 2000 (V4.3) and Macintosh (V4.3) operating systems areavailable at /go/propapersupport. If your printer does not have the newest calibration files, download and install them at this time. These files currently support:LED and laser printers, including:•KODAK PROFESSIONAL RR 30 Laser Printer •KODAK PROFESSIONAL RP 30 and SRP 30 Laser Printers •KODAK PROFESSIONAL RP 50 LED Printer•KODAK PROFESSIONAL LED II Printers 20R and 20P •KODAK PROFESSIONAL LED Digital Color Printers 20R and 20PCRT printers, including:•KODAK PROFESSIONAL Digital Multiprinters (KPDM & KPDM II)•KODAK DIGITAL SCIENCE LF CRT Color Printer •KODAK 4" CRT Color PrinterNote: New ICC output profiles are also recommended for ENDURA Premier Paper because of its greater color gamut. ICC output profiles can be found at /go/colorprofiles.Other Equipment Manufacturer’s Printer Calibration for KODAK PROFESSIONAL ENDURA PremierPaperThe starting-point recommendations listed in the following table have yielded good image quality in prints on KODAK PROFESSIONAL ENDURA Premier Paper produced by other equipment manufacturers' digital output devices.Calibration Routines for KODAK PROFESSIONAL ENDURA Premier PaperPaper and Output SystemsEASTMAN KODAK COMPANY • ROCHESTER, NY 14650Revised 01-12Calibration Routines for KODAK PROFESSIONAL ENDURA Premier PaperKODAK Publication No. CIS-289Printer CalibrationOce LightJet 430 and 50001.Go to the Oce FTP Site at /PrinterSupport/LJ_Customer_Access.2.Read the "Lightjet Media Read Me" document for information regarding downloading printer aims.3.Select the link to the Media Targets for your Lightjet printer.4.Download the appropriate aim files, as directed in the read-me file.Durst Lambda 130 and 76+Starting D-max: 2.45R, 2.30G, 2.22B (It is possible to obtain higher D-max in images that do not include text.)Basic Calibration settings: Y=91.70, M=81.90, C=0.00, D=116.9Durst Epsilon 30For best results, select HIQ or SIQ mode.Starting D-max: 2.35R, 2.20G, 2.15BBasic Calibration settings: D=0.967, C=0.000, M=0.203, Y=0.159Durst Theta 76Starting D-max: 2.25R, 2.20G, 2.15B,Basic Calibration settings: D=1.452, C=0, M=0.012, Y=0.154Durst Theta 50/51Starting D-max: 2.30R, 2.20G, 2.20BBasic Calibration settings: D=131.00, C=0.0, M=87.00, Y=140.00Durst Zeta Please contact your Durst service representative for the file.Fuji FrontierWe recommend that you use KODAK PROFESSIONAL ENDURA Premier Paper to calibrate the printer channel that you plan to use. If you don't have a recommended channel that you normally use, please start testing with Channel I.1.Load ENDURA Premier Paper into the paper magazine that you will use to print.2.From the Setup and Maintenance menu, select Print Condition Setup and Check . Then select Paper Condition Setup to perform a standard calibration.Noritsu QSS-2711 and Noritsu MP1600Setting up a Channel for KODAK PROFESSIONAL ENDURA Premier Paper1.Set up a paper channel with ENDURA Premier Paper, using the normal Setup procedure. This setup includes MLVA Setup, Uniformity, and Gamma tests.2.If any color changes are needed, enter them using the Magazine Balance function on the NORITSU MP1600 printer.Noritsu QSS 31XX, 32XX, 33XX, 34XX, and R2R printers 1.Contact Noritsu for the software which contains the profile data for KODAK PROFESSIONAL ENDURA Premier Paper.2.If profile data is not available from Noritsu, use the Supra VC channel. Calibrate using the "Registering a New Paper Type and Setup" procedure. Refer to your Noritsu manual.Polielettronica LASERLAB 1.Set these starting Laser Maximum Density values: Y=257, M=236, C=191.2.Starting Color Compensation Values: Y=0.93, M=0.84, C=0.97.3.Proceed with the manufacturer's standard paper calibration procedure. Gretag Netprinter Basic Data required for calibration are available from Gretag Imaging.Sienna Mileca HSP Basic Data required for calibration are available from Sienna Imaging.ZBE ChromiraSelect Kodak on the Emulsion menu, and enter:D-max Aim: 2.45R, 2.45G, 2.40BStarting Calibration Values: (C) 0, (M) 47, (Y) -45, (D) -22 Then follow the standard paper calibration procedure.Kodak, Kodak Professional, Endura, and Supra are trademarks.。
1. 依照诺日士Noritsu彩扩机操作手册概述说明,执行“新相纸类型登记及设定”。
请参阅第 3-3章(见附件)。
2.为柯达金尊数码相纸Premier Digital Paper,选择相纸通道。
在诺日士NORITSU彩扩机上使用柯达金尊数码相纸KODAK Premier Digital Paper3.3 新相纸类型登记及设定 [相纸规格登记/设定]3.3 新相纸类型登记及设定 [相纸规格登记/设定]当要使用新相纸时,必须依照以下步骤执行登记作业,而最多可有三种不同类型的相纸能够同时被登记使用。
进入设定方式如下:在主界面, 按下 F. → 菜单(Menu) → 扩展(Extension) → 设定(Setup) → 激光设定(Laser Setup) →相纸规格登记/设定(Paper Specification Registration/Setup)范例: 相纸规格登记/设定(Paper Specification Registration/Setup) 显示如下如何登记1. 在相纸规格登记/设定画面中, 选择一个新类型的相纸来使用。
最多可有三种不同类型的相纸能被选择。
●当只有一种相纸类型要被登记时,请用第1种来设定。
●当新相纸类型不存在时,请读取相纸类型数据。
细节可参考 ?3.2 读取新相纸的配置文件(Reading the setup data of new paper).范例: 选择相纸类型155:Royal3.3 新相纸类型登记及设定 [相纸规格登记/设定]2. 选择在设定中使用的纸箱。
选择区域的数字与相纸类型的编号相符合。
范例: 纸箱的选择3. 点按 YES: Enter.确认显示。
4. 点按 YES.使用安装新的相纸类型和纸箱登记。
接下来,设置本机能够使用的相纸。
5. 将纸卷放入设定的纸箱,并安装到彩扩机。
有关如何设定相纸的详细信息,请参阅?操作手册–基本操作 -4.2 更换相纸。
1范例: 相纸规格登记/设定画面点按相纸规格登记/设定2 Select the paper type to be set up.2 选择要设定的相纸类型3–93.3 新相纸类型登记及设定 [相纸规格登记/设定]8. 点按 YES:> Next.测试打印的输出及密度仪校正会自动执行。
柯达preps5.3教程
首先要安装好柯达preps5.3:打开软件选择新建模板,这主要选择的是装订样式,根据自己要拼的文件来选择。
进入以后,主要选择印刷方式、宽度和高度(这里的尺寸就是我们要拼的小页尺寸加上角线空隙的尺寸)。
再下面是印张边到孔中心的距离,这我们一般都不要所以把尺寸填大点,把它移到页面外这样打印PS就打不到了。
侧拉规位置
也不常用,选择无就行了。
再后来就是中心标记的长度常用3mm就OK了。
这时点模板选择创建拼版(ctrl+m)。
这时就要填上成品大小(也就是小页大小),拼版页面数量,根据自己要拼多少来决定。
后面再把折叠标记的长度改成3mm。
小页就拼到大版里面了,再根据自己的要求改好空隙和页码,再加入裁切线就好了,保存模版文件。
现在我们开始把要拼的PDF文件置入模板,打开文件列表工
具,先添加文件、再选择对应的模板文件。
选择好模板以后一定要点一下自动选择工具。
在拼好的文件中选中大版文件后选择设备(这一步很重要,能不能输出PS就看这步了。
)这是要选择一个虚拟打印机,为输出PS用的。
设置好以后就可以输出PS文件了。
大功告成只要直接输PS就OK了.
上面的教程写的哪里不好请大家多多谅解,如果有需要PJ 软件的可以和我联系,QQ:1727 123 666。