Transcell BSS-750kg传感器

美国suncells称重传感器suncells传感器HSX-A是美国SUNCELLS公司出品的一款波纹管称重传感器，材质有合金钢和不锈钢可选，采用全激光焊缝，防护等级高，有防尘、防爆等优点。

而且更好的保证了精度，安装也非常的便捷，不易损坏。

美国suncells传感器是美国注册的称重传感器制造商，因其产品价格低廉，质量上乘，是各大化工厂、试验机厂、电子衡器等等行业单位的***。

完善的售后，强大的技术支持，保证suncells产品的广泛应用跟优良的口碑、桥式结构传感器1、QS/QS-A称重传感器，适用于汽车衡、轨道衡、配料秤等。

型号有：QS-5t,QS-10t,QS-15t,QS-20t,QS-25t,QS-30t,QS-40t,QS-50t。

QS-A-5t,QS-A-10t,QS-A-15t,QS-A-20t,QS-A-25t,QS-A-30t,QS-A-40t,QS-A-50 t。

2、QSB-A/-SS称重传感器，适用于汽车衡、轨道衡、轴量秤、地上衡、仓储秤等。

型号有：QSB-A-10klb,QSB-A-20klb,QSB-A-25klb,QSB-A-40klb,QSB-A-50klb,QSB-A-60k lb,QSB-A-75klb。

QSB-SS-10klb,QSB-SS-20klb,QSB-SS-25klb,QSB-SS-40klb,QSB--SS-50klb,QSB -SS-60klb,QSB-SS-75klb。

3、QSC-A/-SS称重传感器，适用于汽车衡、轨道衡、轴量秤、地上衡、仓储秤等。

QSC-A-5klb,QSC-A-10klb,QSC-A-20klb,QSC-A-25klb,QSC-A-30klb,QSC-A-50kl b,QSC-A-60klb,QSC-A-75klb,QSC-A-100klb。

QSC-SS-5klb,QSC-SS-10klb,QSC-SS-20klb,QSC-SS-25klb,QSC-SS-30klb,QSC-S S-50klb,QSC-SS-60klb,QSC-SS-75klb,QSC-SS-100klb。

美国Transcell称重传感器深圳现代豪方-陈工Transcell技术有限公司，于1981年在美国成立，总部在芝加哥北部的布法罗格罗夫，也是Transcell的仓储，分装，运输中。

，专注于称重传感器，邮用称，高精度天平和工业称。

此外还提供国际标准综合设备服务。

1、美国Transcell系列称重传感器：BAB S 型拉压式称重传感器铝制 5M/10M/15M/20M/50M/100MBSA S型拉压式称重传感器合金钢 25kg/50kg/250LBBSS S型拉压式称重传感器合金钢 100kg-750kg/1T/1.5T/2T/5T/7.5T/10TBSS S型拉压式称重传感器:BSS-25kg、BSS-50kg、BSS-100kg、BSS-500kg、BSS-750kg、BSS-1t、BSS-1.5t、BSS-2t、BSS-2.5t、BSS-5t、BSS-7.5t、BSS-10tBAB S型铝制称重传感器BAB-5M BAB-10M BAB-25M BAB-50M BAB-75M BAB-100M BAB-150M BAB-200MBSA S型称重传感器 BSA-25kg\50kg\250lbBSS-ESH S型称重传感器 200kg-5TBSSD S型称重传感器 5T\15T\20TSBS 单悬臂梁式称重传感器 SBS-250kg、SBS-500kg、SBS-1t、SBS-1.5t SBS-2t、SBS-5t、SBS-7.5t、SBS-10t SB 单悬臂梁式称重传感器SBS-ESH 单悬臂梁式称重传感器SBSK 单悬臂梁式称重传感器TA 悬臂梁式称重传感器TSB 单点式称重传感器DBS 双剪梁式称重传感器 DBS-1K lb\1.5K lb\2.5K lb\5K.lb\75K lbDBSQ（QY）桥式称重传感器 QY-10t\20t\25t\30t\50tDBS 双剪梁式称重传感器: DBS-1K lb DBS-1.5K lb DBS-2.5K lb DBS-3K.lb DBS-5K lb DBS-10K lb DBS-15K lb DBS-20K lb DBS-25 K.lb DBS-30K lb DBS-50K lb DBS-75K lbDBSQ（QY）桥式称重传感器数字式称重传感器: QY-10t QY-20t QY-25t QY-30t QY-50tFAD 单点式称重传感器 FAJ 单点式称重传感器 FAS 单点式称重传感器FAV 箱式称重传感器: FAV-60kg FAV-150kg FAV-250kg FAV-500kgFAY 箱式称重传感器: FAY-100kg FAY-150kg FAY-200kg FAY-250kg FAY-300kg FAY-500kg FAY-635kg FAY-1000kgFGA 箱式称重传感器:FGA-3kg FGA -5kg FGA -10kg FGA -15kg FGA -20kg FGA -30kg FGA-50kgK700 K800箱式称重传感器MSB 轮辐式称重传感器DBST 柱式称重传感器DBSL 轮辐式称重传感器DBSL-5T/DBSL-10T/DBSL-20T/DBSL-30TTSB 单点式称重传感器/DBS 双剪梁式称重传感器 DBS-1K lb\1.5K lb\2.5K lb\5K.lb\75K lbDBSQ（QY）桥式称重传感器 QY-10t\20t\25t\30t\50t/FAD 单点式称重传感器TC-2005 计数秤/TC-2010 计数秤/TP-500 称量计数系统/MS-1000 工业秤/MSB-500BW 工业秤MSB-500E 工业秤/PC系列工业秤/SPC系列工业秤/SP系列工业秤/SRP-300 工业秤/SSB-3500 工业秤MSB-4300 多用途工业秤/WEIGHBLOK系列工业秤/SSP-3400 平台秤/MSP-4200 平台秤CR-500 吊钩秤/Guardian系列地磅/PALLET RUNNER 叉车秤/Weigh Beam便携式称重系统/数字式称重传感器FAV 箱式称重传感器 FAV-60kg\150kg\250kg\500kgFAY 箱式称重传感器 FAY—100kg\150kg\200kg\500kg\1000kgMSB 轮辐式称重传感器/DBST 柱式称重传感器/NEPTUNE-4500 检重秤/NEPTUNE-4500显示仪表NEPTUNE-5500 检重秤/NEPTUNE-5500 显示仪表/NEPTUNE-6500检重秤/NEPTUNE-6500显示仪表T1-500BW 数字显示仪表/T1-500E 称重显示仪表/T1-500E-SS 耐用称重显示仪表/T1-500SL 耐用显示仪表T1-600ESS化工称重显示仪表/T1-1500 高精度显示仪表/T1-1600 高精度显示仪表/大屏幕显示器数字汽车衡称重管理软件操作手册/RF 无线数据传送模块使用说明/MP-20 热敏打印机2、长期供应美国Transducer Techniques称重传感器及仪表（1）Transducer Techniques称重传感器力传感器：HFG：11LB 45LB 110LB;GSO: 10,25,30,50,100,150,250,500,1K GRAMS;MDB: 2.5, 5, 10, 25, 50, 75, 100 LBS;MLP: 10,25,50,75,100,150,200,300,500,750,1K LBS;SLB: 25, 50, 100, 250,500, 750, 1K LBS.LBO: 100,250,500,750,1K,2K,3K,5K,10K,15K,20K,30K,50K LBS.LBC: 100,250,500,750,1K,2K,3K,5K,10K,15K,20K,30K,50K LBS;LBM: 50,100,200,500,1k,2K,2.5K,5K,8K,10K LB;MLC: 2K, 3K, 5K, 7.5K, 10K, 15K,20K,30K lb;CLC: 50K, 100K, 200K, 300K, 400K lb(柱式）；THA：50, 100, 250, 500 LBS.THB：100, 250, 500, 1,000, 2,000 LBS.；THC：3,000, 5,000, 7,500, 10,000 LBS；THD：2K, 3K, 5K, 7.5K, 10K,15K, 20K, 30K, 50K LBS;LWO: 2.4K, 4K, 7K, 10K, 14K, 20K, 25K, 30K, 45K, 60K, 80K,125K, 190K, 260K, 300K lb;SSM: 50,100,200,500,1K, 2K, 2.5K,5K, 8K, 10K LBS;DSM: 50,100,200,500,1K, 2K, 2.5K,5K, 8K, 10K LBS;TLL: 500, 1K, 2K, 3K, 5K, 10K, 20K, 30K, 50K lb;SBO: 50, 100, 200, 300, 500, 750,1K, 2K, 3K, 5K LBS;SWO: 1K, 2K, 3K, 5K,10K, 20K, 30K, 50K LBS;HSW: 1K, 2K, 3K, 5K,10K, 20K, 30K, 50K LBS;LPO: 500, 1k, 2k, 3k, 5k, 10k, 20k LBS;LPU: 100,250,500,1K,2K,3K,4K,5K,7.5K,10K,15K,20K,30K, 50K LBS;SWP: 1K, 2K, 3K,5K, 10K, 20K, 50K LBS ;CLP: 750, 1.5K, 3K, 6K,12.5K, 18K, 30K lb ;(2) Transducer Techniques称重传感器梁式传感器：TBS：0.25, 0.50, 1, 2, 5,10, 20, 40 LBS；EBB：1, 2, 5,10 Kg.LSP：1, 2, 5,10 Kg；ESP：6, 10, 15, 20, 25, 30, 35 Kg.SPL：65, 100, 150, 200, 300, 500 Kg.；SBL：500, 1K, 2K, 2.5K, 3K,4K, 5K, 10K, 15K,20K LBS.(3) Transducer Techniques称重传感器扭矩传感器：RST：10，20，50，100，200，500，1K，2K，5K，12K，30K inch lbs;RSS：10, 20, 50, 100, 250, 600, 1K FT-LBS ；RTS：5, 10, 25, 50, 100, 200, 500, 1K Oz-inch;TRT: 25, 50, 100, 200, 500 INCH-LBS;TRS: 500, 1K, 2K, 5K, 10K, 20K, 50K, 100K INCH LBS;SWS: 10, 20, 50, 100, 250, 600, 1K FT-LBS ;STS: 600, 1.2K, 2K, 3K, 6K, 12K inch lbs ;显示仪表系列：DPM-2 DPM-3 TIO-3000 PHM-100；接线盒、放大器：TMO-2、TMO-2A、PSM-F10、PSMR、DSP-1、TM0-1、TMO-1-24VDC、SJB-4、TSM-3MV3、供应美国Transducer Techniques称重传感器及仪表（1）力传感器：HFG：11LB 45LB 110LB;GSO: 10,25,30,50,100,150,250,500,1K GRAMS;MDB: 2.5, 5, 10, 25, 50, 75, 100 LBS;MLP: 10,25,50,75,100,150,200,300,500,750,1K LBS;SLB: 25, 50, 100, 250,500, 750, 1K LBS.LBO: 100,250,500,750,1K,2K,3K,5K,10K,15K,20K,30K,50K LBS.LBC: 100,250,500,750,1K,2K,3K,5K,10K,15K,20K,30K,50K LBS;LBM: 50,100,200,500,1k,2K,2.5K,5K,8K,10K LB;MLC: 2K, 3K, 5K, 7.5K, 10K, 15K,20K,30K lb;CLC: 50K, 100K, 200K, 300K, 400K lb(柱式）；THA：50, 100, 250, 500 LBS.THB：100, 250, 500, 1,000, 2,000 LBS.；THC：3,000, 5,000, 7,500, 10,000 LBS；THD：2K, 3K, 5K, 7.5K, 10K,15K, 20K, 30K, 50K LBS;LWO: 2.4K, 4K, 7K, 10K, 14K, 20K, 25K, 30K, 45K, 60K, 80K,125K, 190K, 260K, 300K lb;SSM: 50,100,200,500,1K, 2K, 2.5K,5K, 8K, 10K LBS;DSM: 50,100,200,500,1K, 2K, 2.5K,5K, 8K, 10K LBS;TLL: 500, 1K, 2K, 3K, 5K, 10K, 20K, 30K, 50K lb;SBO: 50, 100, 200, 300, 500, 750,1K, 2K, 3K, 5K LBS;SWO: 1K, 2K, 3K, 5K,10K, 20K, 30K, 50K LBS;HSW: 1K, 2K, 3K, 5K,10K, 20K, 30K, 50K LBS;LPO: 500, 1k, 2k, 3k, 5k, 10k, 20k LBS;LPU: 100,250,500,1K,2K,3K,4K,5K,7.5K,10K,15K,20K,30K, 50K LBS;SWP: 1K, 2K, 3K,5K, 10K, 20K, 50K LBS ;CLP: 750, 1.5K, 3K, 6K,12.5K, 18K, 30K lb ;(2)梁式传感器：TBS：0.25, 0.50, 1, 2, 5,10, 20, 40 LBS；EBB：1, 2, 5,10 Kg.LSP：1, 2, 5,10 Kg；ESP：6, 10, 15, 20, 25, 30, 35 Kg.SPL：65, 100, 150, 200, 300, 500 Kg.；SBL：500, 1K, 2K, 2.5K, 3K,4K, 5K, 10K, 15K,20K LBS.(3)扭矩传感器：RST：10，20，50，100，200，500，1K，2K，5K，12K，30K inch lbs;RSS：10, 20, 50, 100, 250, 600, 1K FT-LBS ；RTS：5, 10, 25, 50, 100, 200, 500, 1K Oz-inch;TRT: 25, 50, 100, 200, 500 INCH-LBS;TRS: 500, 1K, 2K, 5K, 10K, 20K, 50K, 100K INCH LBS;SWS: 10, 20, 50, 100, 250, 600, 1K FT-LBS ;STS: 600, 1.2K, 2K, 3K, 6K, 12K inch lbs ;显示仪表系列：DPM-2 DPM-3 TIO-3000 PHM-100；接线盒、放大器：TMO-2、TMO-2A、PSM-F10、PSMR、DSP-1、TM0-1、TMO-1-24VDC、SJB-4、TSM-3MV4、供应Vishay nobel称重传感器压力传感器KIS-1、KIS-2、KIS-3、KIS-8、KIS-9、KIS-11、KIM-1、 KISD-6、KOM-1、 KOSD-40、 KOSD、 KIP-1威世诺贝尔Vishay Nobel的产品范围包括用于制药、化学、食品和其它需成批处理产业的高质量的测压元件、仪器和软件。

美国transcellS型传感器产品特点及用途，美国transcellS型传感器的量程及
尺寸图
随着中国自动化不断发展进步，工控自动化产品也是大众需求。

上海力恒传感技术有限公司致力于力传感器及其信号处理的系统工作，公司在力传感器领域有着不断的追求。

今天小编就以上海力恒传感技术有限公司的美国transcellS型传感器为例讲解相关内容。

一、美国transcellS型传感器介绍
型号：BSS-ESH
S型传感器,优质不锈钢材质. 通过CMC、PA认证。

二、美国transcellS型传感器的产品特点及用途：
· S型传感器
·优质不锈钢材质、全密封焊接(100kg除外)
·通过CMC、PA认证
·安装简便、快速，稳定可靠，适用于材料试验机、配料秤、搅拌站和皮带秤等
三、美国transcellS型传感器的量程及尺寸图
四、美国transcellS型传感器的技术参数
以上内容由上海力恒传感技术有限公司的小编整理，希望对大家有用~
上海力恒传感技术有限公司致力于力传感器及其信号处理的系统工作，公司在力传感器领域
有着不断的追求。

随着中国自动化不断发展进步，我们团队积累了多年一线工作经验。

出于对自动化的理解和认识，公司始终坚持"因为专业、所以信服"的企业运作理念打造了一支自动化领域的专业团队，为客户提供系统的售前和售后服务，持续不断的提供质量稳定的产品，持续研发新的产品、最大限度的满足客户需求。

公司经营力传感器、智能变送器、智能仪表等工控自动化产品；自动检测、自动控制与软件开发；工业自动化非标设备、工业自动化生产线的方案设计与实施的系统集成项目。

®意大利倍尔实验室仪器设备符号电磁力恢复：永久磁铁中的线圈，用于实现最精确的称重高精度称重传感器：应变计通过测量电阻的变化来测量变形RS232 数据接口：通过此接口连接天平与打印机和其他 PC 外围设备。

测量单位：选择天平显示重量时所用测量单位计件：此功能对相同的项目进行计数，有一些参考数量可供选择检重：上限和下限可以各自设置，用于计量和配料。

百分比称重功能：计算样本重量相比于参考重量(100%)的百分比值。

累计功能：测量多个项目的累计重量。

显示总计和当前重量动物称重：在不稳定条件(如称量活动的实验动物等)下提供准确读数。

密度测定功能：准确测定固态物体或液体的密度最大负荷(峰值保持)功能：称量一连串重物时保留峰值重量GLP 设置：允许存储天平、项目和用户的识别数据。

日期和时间日期和时间：天平显示当前的日期和时间多语言：天平的菜单中有多种语言可供选择配方：允许设置配方中每种成分的名称和公差。

自动配料悬挂称重：可以在天平的底面装一个配有挂钩的支架蓄电池：天平内自带蓄电池，或可连接可选外置蓄电池使用电池操作：天平可以使用一组 AA 电池。

统计功能：显示最小值(Min)、最大值(Max)、总和(Sum)、平均值(Average)、标准偏差(Standard Deviation)毛重-净重-皮重：此功能用于同时显示毛重、净重和皮重。

数据库：内置数据库，用于存储数据和干燥方法纺织功能：确定线的名称、测量单位：Tex 、Td 、Nm 、Nc 。

干燥方式：提供干燥过程在不同温度下的曲线红外传感器：非接触，调用“去皮”或“打印”功能而不用接触天平触摸显示屏：此技术用户友好、易于使用、直观易懂。

蓝牙接口：可以连接蓝牙设备USB 接口：可连接 U 盘图：实时干燥过程可视化显示图密码：用户配置文件可以用密码保护内存：最多可以存储 5 种不同的干燥方案RECIPE STATRS 232G L P % WEIGH%UNITSLIMITS– +UNDERPCSACCUANIMALADDPEAKDENSITYCLOCK LANGBATTERYAANETLC-HREM-FRN S RECIPESTATUNDERACCULANGBATTERYAANETDATABASETEXTILETOUCHSENSMODESBLUETOOTHUSBATGRAPHNET DATABASETEXTILE TOUCH SENS MODES USB PASSWORDM E M OGRAPH ET DATABASE TEXTILE TOUCHSENSMODES USB PASSWORDM E M OGRAPH ABASETEXTILE TOUCHSENSMODESUSBPASSWORD M E M O6-7半微量天平M5-HPB系列可读性 0,01mg8-9半微量天平HPB和S HPB系列可读性 0,01mg10分析天平M系列可读性 0,0001g11精密天平MW和LW 系列可读性 0,001g12可读天平M和L系列可读性 0,01g13可读天平L系列可读性 0,1g14-15可读天平M5-RB 和RB系列可读性 0,01g-0,1g16-17水分测定仪i-Thermo和M5-Thermo 系列可读性 0,0001g-0,001g-0,01g18 可读天平S系列可读性 0,001g-0,01g-0,1g可选配件19-21水分测定仪4( n = 标准 q = 可选的 s = 仅限某些型号)5全自动内部校准M5-HPB-425i 420,01Ø 800,03± 0,08M5-HPB-625i 620,01Ø 800,03± 0,08M5-HPB-105i 1020,01Ø 800,05± 0,08M5-HPB-1265Di 62/1200,01/0,1Ø 800,03 / 0,1± 0,08 / ± 0,2M5-HPB-2285Di 82/2200,01/0,1Ø 800,04 / 0,1± 0,08/ ± 0,2M5-HPB-22105Di102/2200,01/0,1Ø 800,05 / 0,1± 0,08 / ± 0,2系列 - 可读性 0,01mg - 0,1mg型号最大秤量 (g)可读性[d](mg)秤盘尺寸(mm)重复性 (mg)线性误差 (mg)②②②②②②ADD G L P % WEIGH %UNITS LIMITS – +PCS ANIMAL PEAK DENSITY CLOCK LANG RECIPE STAT G L PUNDER ACCU PEAK CLOCK LANG BATTERY AANET DATABASE TEXTILE TOUCH MODES BLUETOOTH USB USB GRAPH PASSWORD M E M O RECIPE ADD G L P % WEIGH %LIMITS – +PCS ANIMAL PEAK DENSITY CLOCK LANG RECIPESTAT G L PUNDER ACCU CLOCK LANGBATTERY AANET DATABASE TEXTILE STAT BATTERY AANET DATABASE TEXTILE M5-M214Ai 2200,1Ø 800,1± 0,0003M5-M314Ai 3100,1Ø 800,1± 0,0003M5-HPB 414i4100,1Ø 800,1mg 如果重量 ≤ 220g 0,3mg 从 220g 到 310g 0,35mg 从 310g 到 410g ± 0,0005M5-HPB 514i 5100,1Ø 800,1mg 如果重量 ≤ 220g 0,3mg 从 220g 到 310g 0,35mg 从 310g 到 510g ± 0,0005M5-HPB 614i 6100,1Ø 800,1mg 如果重量 ≤ 220g 0,3mg 从 220g 到 310g 0,35mg 从 310g 到 610g± 0,0005ADDRS 232G L % WEIGH %UNITSLIMITS– +PCS ANIMALPEAK DENSITY LC-HR7附件TX-110 串行打印机 (AC030)用于固体和液体的密度工具包(AC002)串行到 USB 转换器(E1002))串行电缆，用于串行输出到打印机或电脑(E743)8 GB U盘(AC020)触摸屏手写笔(AC021)技术数据n 量程漂移(+10 … +30°C): +/– 2ppm/°Cn外形尺寸 长×宽×高(毫米):345×215×345n 称重室尺寸 长×宽×高(毫米):162×171×225n 电源 110-230 Vac, 50/60 Hz:输出 24 V /500 mA / 13 VAn 净重：7,2 千克静电消除器技术数据n 操作方式: 2分钟或连续运作最多8小时n 臭氧浓度: 0-0.05 ppm(距离离子源2 厘米)n 放电时间: 9 秒/5 厘米,13秒/10 厘米n 环境条件: 0-50°C，20-80% 空气湿度(无冷凝)n 交流适配器: 交流电 100-240V，50-60 HzA主要功能页面使称重操作更简单百分比称量移液器校准清晰简单的GLP功能输入静电消除器与天平整合:在实验室日常操作过程中，静电会在多种待称重的样品上聚积。

美国贝克曼库尔特流式细胞分析仪（Beckman coulter cell）产品型号：Cell Lab Quanta SC当前价格：0.00元产品数量：0新旧程度：全新有效期至：0000-00-00所在地：产品简介：仪器简介：T细胞亚群检测的CD45/CD4/CD8/CD3、CD45/CD56/CD19/CD3；阵发性血红蛋白尿（PNH）检测的CD55、CD59；血小板无力症（GT）检测的CD41、CD61等等详细信息仪器简介：T细胞亚群检测的CD45/CD4/CD8/CD3、CD45/CD56/CD19/CD3；阵发性血红蛋白尿（PNH）检测的CD55、CD59；血小板无力症（GT）检测的CD41、CD61等等。

但对于白血病/淋巴瘤免疫分型，国际上迄今为止也没有统一的抗体组合。

在2000年国际细胞分析学会（ISAC）大会上，临床血细胞计数协会组织了一次国际专家会议，以期对检测血液淋巴系统肿瘤所需最少、最有效的单抗数达成共识。

75%与会者一致认为，对于慢性淋巴系统增殖性疾病（CLD）有9种单抗：CD5,CD19,κ,λ,CD3,CD20,CD23,CD10,CD45对初诊来说是最基本的。

淋巴瘤和CLD相似，需要至少12-16种单抗。

对于急性白血病（AL），75%的与会者认为大约13-15种单抗是最基本的：CD10,CD19,CD79a,CD13,CD33,CD34,CD45,CD2,MPO，CD7,CD14,CD3,HLA-DR等，对初步鉴别白血病系列是必需的。

其他一些（CD16,CD56,CDw65,TdT,cyCD3）可能对某些病例有用。

几乎所有的投票者都认为，要对急性白血病完善分类所需单抗的恰当数量平均为20-24种。

但这些抗体之间组合也是一大难题，目前也无统一规定（如表二）。

大会多数发言者(11/13)指出，对已确诊病人的监护和分期来说，仅需较少单抗。

抗体的质量控制是实验的关键环节。

抗体的质量包括其特异性、灵敏度、精密度。

Focus on BiosensorsBiosensors – a new Sensor Type from IST AGWhat are Biosensors?A biosensor is a device capable of detecting a certain substance or analyte with high specificity. Examples of such analytes are glucose, lactate, glutamine and glutamate. Most biosensors measure the concentration of an analyte in an aqueous solution, usually producing an electrical signal, which is proportional to the analyte’s concentration in its measuring range.An enzymatic biosensor comprises an enzyme, whichrecognizes and reacts with the target analyte generatinga chemical signal, a transducer, which produces a physicalsignal out of that chemical one, and an electronic amplifier,which conditions and amplifies the signal.Biosensors allow the analysis in complex biological media.The detection of a large number of compounds is ofgreat relevance not only for scientific research but alsofor process control in the chemical and food industry. It isalso indispensable in the health care field for the diagnosisand treatment of diseases and monitoring of illnesses.The pharmaceutical and biotechnology industries greatlydesire frequent to continuous analysis of biological media. Such analyses are conducted with the aid of analytical instruments like HPLC systems, which, although robust and reliable, are expensive and have a limited suitability for online operation. For this reason, the acquisition of Jobst Technologies GmbH positions IST AG as a key provider of high-performance and reliable online biosensors.Enzymatic Biosensors for Metabolic ParametersBack in the early 1960’s Clark and Lyons introduced the first glucose sensorusing an enzyme (glucose oxidase, GOx) as receptor, this enzyme beingspecific for glucose. Enzymes enable the highly specific measurement of theircorresponding analyte even in complex mixtures like fermentation broth andblood; it is like finding a needle in a haystack.Analytes such as glucose, lactate, glutamine and glutamate play an importantrole in the metabolism of living organisms. Glucose and glutamine support thecell function and growth; lactate is produced by cells and allows judging theefficiency of the cells metabolism; and glutamate is an amino acid consumedby cells. Each of these analytes requires a specific set of enzymes for itsdetection.The continuous (on-line) monitoring of the concentration of such parametersenables among numerous others■the generation, optimization and control of feeding strategies in cell cultures■the minimization of patients’ risks during surgery and intensive care■on-site analysis of food processes Presentations at the Biotechnica by Gerhard Jobst: ■Miniaturized analytical systems for bio/medical monitoring (Tuesday, 6th October / 3:30 - 4:00 pm / Hall 9 Booth C55) ■Biosensors for reliable monitoring (Wednesday, 7th October / 3:45 - 4:05pm / Hall 9 Booth F51)General structure of a biosensor. Sensors by IST AG use enzymes to detect glucose, lactate, glutamine and glutamate. The transducer principle is electrochemical, producing a current as output signal (amperometric).Focus on BiosensorsVersatile SensorsJobst Technologies GmbH has decades of experience in enzymatic biosensors. Enzymes are immobilized in a stack of four permeable polymeric membranes on top of platinum micro-electrodes, which pick up an electrical current originating from the enzymatic reaction. The superior membrane technology by Jobst Technologies allows for easy tuning of performance parameters like sensitivity, measurement range and response time. Moreover, this technology is compatible with sterilization by irradiation (gamma, beta). All this makes our biosensors suitable for a large variety of applications.Thanks to the small size of the electrodes, a single chip can hold several electrodes. The array sensor LV5 from Jobst Technologiesfeatures up to 6 sensitive electrodes where glucose, lactate, glutamine and glutamate can be detected simultaneously. Very small liquid samples can be analyzed as they flow through its 1-μL flow cell, thus being suitable for offline analysis as well as for online operation.Cross section of a flow-through LV5 biosensor featuring a flow-through cell for measuring of glucose, lactate, glutamine and glutamateLast but not least, each sensor is factory calibrated and marked in an automated process providing full traceability making it ideal for ready-to-use and single-use applications.Biomedical Application – A new Landmark Product: EIRUSOptimal treatment of critically ill patients requires the continuoussurveillance of their blood values. Recently, a world-leading providerof medical systems for hospitals, Maquet Critical Care, has beensetting a new standard by introducing the EIRUS platform specificallydeveloped to provide continuous monitoring of both glucose andlactate in critically ill patients. In addition to optimizing patient carequality, it reduces nurses workload compared to frequent intermittentblood analysis. This system relies on micro-dialysis technology thatfeeds a flow-through sensor developed and manufactured in Freiburg(Germany) by Jobst Technologies GmbH.During several days of continuous operation, EIRUS reports glucoseand lactate blood levels every minute and raises alerts wheneverthe values fall outside the preset ranges. This enables the rapidassessment of the patient’s glycemic condition, which in turn ensuresfor prompt and swift glucose management with insulin. Tighterglycemic control benefits not only diabetic patients but has beenshown to improve outcome also in non-diabetic critical care patients who frequently display a condition called ‘stress diabetes’.Elevated lactate levels (hyperlactatemia) are an indicator of increased morbidity and mortality. Monitoring of lactate enables an early and EIRUS system by Maquet for continuous monitoring of glucose and lactate in intensive care patients. Copyright: Maquet Critical Carecontinuous risk assessment, diagnosis and therapy minimizing patients’ risks.Focus on BiosensorsBiosensors – Their Application in BiotechnologyNowadays cell cultures aid in the development of new drug and medication. Animal cells are engineered to express proteins and antibodies used in the treatment of several illness and conditions. In order to maximize yield and product quality, conditions of cell cultures must meet optimal values. Monitoring of nutrients, like glucose, plays a vital role in the feeding strategy of a cell culture. One type of glucose sensors used in biotechnology requires a fluidic-dilution stage that has to be outside the culture vessel. Such systems show problems like large latency due to the transit time through the dilution stage; more footprint since an external analyzer is required; contamination risk because it is necessary to invasively take samples inside the bioreactor and dealing with the dead volume in the tubes. Other sensors cannot survive prolonged shelf storage after sterilization by irradiation. The technology developed by IST AG and Jobst Technologies allows for continuous glucose monitoring either inside the culturing vessel or by means of a probing parison of glucose values during batch cultureCalibration point (to Bioprofile) ~0.76mM/nA A Chinese-hamster-ovary (CHO) cell line wasused for a batch 1 culture in a conventionalglass bioreactor. The glucose concentration wascontinuously monitored for several days. Forthe control measurements a Nova BioprofileAnalyzer and a HPLC system were used. Dueto their robustness, sensors can be gammairradiated and stored before utilization. Sensorsare precalibrated; however a single calibrationat start provides increased accuracy throughoutthe entire cultivation lasting days. During thistime, a measurement point is acquired everysecond without requiring any manual work asthe used reference systems do.AcknowledgmentSpecial thanks to Dr. Caspar Demuth, Dr. Iris Poggendorf, Fabienne Seiler and Irène Stutz from the Zurich University of Applied Sciences (Institute for Biotechnology, Wädenswil, Switzerland) for carrying out the cultivation and providing us with the data.________________1 In a batch culture, the nutrient medium has starting glucose concentration and no further nutrient feeding is performed.Innovative Sensor Technology USA Division, 9516 W. Flamingo Rd., # 210, Las Vegas, NV 89147, Phone +1 702 894 9891, Fax +1 702 894 9993 ***************************,。

–2–AD626–SPECIFICATIONS ModelAD626A AD626B Parameter Condition Min T yp Max Min T yp Max Unit GAINGain Accuracy T otal ErrorGain = 10@ V OUT ≥ 100 mV dc0.4 1.00.2 0.6 % Gain = 100@ V OUT ≥ 100 mV dc0.1 1.00.5 0.6 %Over T emperature, T A = T MIN to T MAX G = 105030 ppm/°C G = 100150120 ppm/°C Gain LinearityGain = 10@ V OUT ≥ 100 mV dc0.014 0.0160.014 0.016 % Gain = 100@ V OUT ≥ 100 mV dc0.014 0.020.014 0.02 %OFFSET VOLTAGEInput Offset Voltage1.92.5 1.9 2.5 mV vs. T emperatureT MIN to T MAX , G = 10 or 100 2.9 2.9 mV vs. T emperatureT MIN to T MAX , G = 10 or 1006 6 µV/°C vs. Supply Voltage (PSR)+PSR74 80 74 80 dB –PSR64 66 64 66 dB COMMON-MODE REJECTIONR L = 10 k ⍀+CMR Gain = 10, 100f = 100 Hz, V CM = +24 V 66 90 80 90 dB ±CMR Gain = 10, 100f = 10 kHz, V CM = +6 V 55 64 55 64 dB –CMR Gain = 10, 100*f = 100 Hz, V CM = –2 V 60 85 73 85 dB COMMON-MODE VOLTAGE RANGE+CMV Gain = 10CMR > 85 dB +24+24V –CMV Gain = 10CMR > 85 dB –2–2V INPUTInput ResistanceDifferential200 200 k ⍀ Common-Mode100 100 k ⍀ Input Voltage Range (Common-Mode)6 (V S – l) 6 (V S – l) V OUTPUTOutput Voltage SwingR L = 10 k ⍀ PositiveGain = 10 4.7 4.90 4.7 4.90 V Gain = 100 4.7 4.90 4.7 4.90 V NegativeGain = 100.03 0.03 V Gain = 1000.03 0.03 V Short Circuit Current+I SC12 12 mA NOISEVoltage Noise RTIGain = 10f = 0.1 Hz–10 Hz 2 2 µV p-p Gain = 100f = 0.1 Hz–10 Hz 2 2 µV p-p Gain = 10f = 1 kHz 0.25 0.25 µV/ͱHz Gain = 100f = 1 kHz 0.25 0.25 µV/ͱHz DYNAMIC RESPONSE–3 dB BandwidthV OUT = +1 V dc 100 100 kHz Slew Rate, T MIN to T MAXGain = 100.17 0.22 0.17 0.22 V/µs Gain = 1000.1 0.17 0.1 0.17 V/µs Settling Timeto 0.01%, 1 V Step 24 22 µs POWER SUPPLYOperating RangeT A = T MIN to T MAX 2.4 5 12 2.4 5 10 V Quiescent CurrentGain = 100.16 0.20 0.16 0.20 mA Gain = 1000.23 0.290.23 0.29 mATRANSISTOR COUNT Number of Transistors 46 46*At temperatures above 25°C, –CMV degrades at the rate of 12 mV/°C; i.e., @ 25°C CMV = –2 V, @ 85°C CMV = –1.28 V .Specifi cations subject to change without notice.(@+V S = +5 V and T A = 25؇C, un l ess oth e r w ise noted.)SINGLE SUPPLYREV. DAD626–10–necessary to min i m ize gain error. Also, any mis m atch be t ween the total source re s is t ance at each input will af f ect gain ac c u r a c y and common -mode rejection (CMR). For ex a m p le: when operating at a gain of 10, an 80 ⍀ mismatch in the source re s is t ance between the inputs will degrade CMR to 68 dB.The output buffer, A2, operates at a gain of 2 or 20, thus setting the overall, precalibrated gain of the AD626 (with no ex t er n al com p o n ents) at 10 or 100. The gain is set by the feedback net w ork around amplifi er A2.The output of amplifi er A2 relies on a 10 k ⍀ resistor to –V S for “pull-down.” For single-supply operation, (–V S = “GND”), A2 can drive a 10 k ⍀ ground ref e r e nced load to at least +4.7 V . The min i m um, nominally “zero,” output voltage will be 30 mV . For dual-supply op e r a t ion (±5 V), the positive output voltage swing will be the same as for a single supply. The negative swing will be to –2.5 V, at G = 100, limited by the ratio:–V R R R R R S ×+++1514131415 T he negative range can be extended to –3.3 V (G = 100) and –4 V (G = 10) by add i ng an external 10 k ⍀ pull-down from the out p ut to –V S . This will add 0.5 mA to the AD626’s qui e s c ent cur r ent, bringing the total to 2 mA.The AD626’s 100 kHz bandwidth at G = 10 and 100 (a 10 MHzgain bandwidth) is much higher than can be obtained with low power op amps in discrete dif f er e n t ial amplifi er circuits. Fur t her -more, the AD626 is stable driving capacitive loads up to 50 pF (G10) or 200 pF (G100). Capacitive load drive can be increased to 200 pF (G10) by connecting a 100 ⍀ resistor in series with the AD626’s output and the load.ADJUSTING THE GAIN OF THE AD626The AD626 is easily confi gured for gains of 10 or 100. Figure 5 shows that for a gain of 10, Pin 7 is simply left un c on n ect e d; simi-larly, for a gain of 100, Pin 7 is grounded, as shown in Fig u re 6.Gains between 10 and 100 are easily set by connecting a vari a ble resistance between Pin 7 and Analog GND, as shown in Fig u re 7. Because the on-chip resistors have an absolute tol e r a nce of ±20% (although they are ratio matched to within 0.1%), at least a 20% adjustment range must be provided. The values shown in the table in Figure 7 provide a good trade-off be t ween gain set range and resolution, for gains from 11 to 90.S –INPUT –V Figure 5.AD626 Confi gured for a Gain of 10–INPUT S –V Figure 6. AD626 Confi gured for a Gain of 100–INPUT CORNER FREQUENCY OF FILTER =12␲CF (100k ⍀)GAIN RANGE R G (⍀) R H (⍀)11 – 2020 – 4040 – 8080 – 100100k10k1k100 4.99k 802802RESISTOR VALUES FOR GAIN ADJUSTMENT Figure 7. Recommended Circuit for Gain Adjustment SINGLE-POLE LOW-PASS FILTERING A low-pass fi lter can be easily implemented by using the fea t ures provided by the AD626.By simply connecting a capacitor between Pin 4 and ground, a single-pole low-pass fi lter is created, as shown in Figure 8.CORNER FREQUENCY OF FILTER =12␲CF (100k ⍀)OUTPUT –INPUT Figure 8. A One-Pole Low-Pass Filter CircuitWhich Operates from a Single +10 V SupplyREV. D。

load cells广州南创蔡工load cells称重传感器实际上是一种将质量信号转变为可测量的电信号输出的装置。

用传感器茵先要考虑传感器所处的实际工作环境，这点对正确选用称重传感器至关重要，它关系到传感器能否正常工作以及它的安全和使用寿命，load cells乃至在整个衡器的可靠性和安全性。

在称重传感器主要技术指标的基本概念和评价方法上，新旧国标有质的差异。

Load cells分类：Load cells称重传感器按转换方法分为光电式Load cells、液压式Load cells、电磁力式Load cells、电容式Load cells、磁极变形式Load cells、振动式Load cells、陀螺仪式Load cells、电阻应变式Load cells等8类，以电阻应变式Load cells使用最广。

全球称重传感器总汇(load cells) :您还在为自己找不到load cells(称重传感器)所以品牌而烦恼吗？下面对各知名品牌load cells(称重传感器)进行了以下汇总：美国Load cells：AmCells Load cells Ametek AMTI Apollo Research Corp ATI Industrial AutomationArtech Industries IncLoad cells Cooper Instrument Systems Load cells DJ InstrumentsDytran Instrument Inc Load cells Futek Advanced Sensor Inc Load cells Geokon IncHardy Instruments Inc Load cells Helm Instrument Co Load cells GW Instruments IncKistler-Morse(KM) Kulite Semiconductor Load cells Load Cell CentralMagnetic Power Systems Inc Magtrol Inc Load cells Measurement Specialists IncMorehouse Instrument CoLoad cells Michigan Scientific CorporationOmega Engineering RDP Electronic Sensors Schneider Electric-Kavlico SensorsSensoe System Solutions Inc(ACSI) Load cells SensorData Technologies Inc Serena Industries IncSinger Instruments Control IncLoad cells Load cells Soltec Corporation Strainsert StressTek IncSensor Developments IncLoad cells Load cells Toledo Integrated Systems Load cells Transcell Technology IncS.Himmelstein and Company JLM Instrument Arpege-Masterk AKO IncCardinal Scale Mfg.Co Load cells Celesco Transducer Checkline英国Load cells：Applied Measurements Ltd(AML) Control Transducers Ltd Halma Group-Thames Side-MaywoodRDP ElectronicS-Sensors Techni Measure Mecmesin Limited Industrial Measurements LtdDEM Machines Procter and Chester Measurements Ltd(PCM)Load cells LCM Systems Ltd德国Load cells：Burster Gmbh Honigmann Tension MeterLoad cells Lorenz Messtechnik GmbH ME-Messsysteme GmbHPeekel Instruments A.S.T Angewandte SYSTEM-TECHNIK法国Load cells：Scaime IncLoad cells Precia MolenLoad cells日本Load cells：Kyowa Sensor Systems Unipulse CorporationLoad cells Kistler Japan Load cells Sohgoh Keiso NTS Tokyo Sokki Kenkyujo韩国Load cells：C&M Robotics Hitrol Bongshin Loadcell意大利Load cells：Gefran ISILoad cells N.B.C.ElettronicaLoad cells Laumas Electtronica AEP Transducers DINI ArgeoLoad cells瑞典Load cells：Vetek ABLoad cells台湾Load cells：Arico(Gefran) Algol(NTS) EsenseLoad cellsLoad cells称重传感器的选择：Load cells称重传感器在选用时要考虑到很多因素，实际的使用当中我们主要从下列几个因素考虑。

广州兰瑟陈辉编辑BSS-100kgSS称重传感器品牌：美国TRANSCELL(传力)/TRANSCELL称重传感器品名：BSS S型传感器,BSS拉式S型称重传感器型号：BSS-100kgSS传感器，BSS-100kgSS称重传感器广州兰瑟陈辉编辑● S型传感器● 通过CMC、PA认证● 优质不锈钢材质● 全密封焊接● 安装简便、快速 ,稳定可靠● 适用于材料试验机、配料秤、搅拌站和皮带秤等美国transcell BSS-100kgSS称重传感器技术参数：Rated Output 额定输出 2.0mV/V ±0.1%Zero Balance 零点平衡±1% of rated outputCreep after 30 minutes 蠕变±0.03% of rated outputNonlinearity 非线性±0.03% of rated outputHysteresis 滞后±0.03% of rated outputRepeatability 重复性±0.03% of rated outputTemp. effect on output 灵敏度温漂≤0.002% of applied output/ºCTemp. effect on zero 零点温漂≤0.002% of rated output/ºCSafe Temp. Range 可用温度范围-10ºC to + 70ºCTemp. Compensated 温度补偿范围-10ºC to + 40ºCSafe Overload 安全载荷150%Input Impedance 输入阻抗387 ohm ± 20 ohmOutput Impedance 输出阻抗350 ohm ± 5 ohmInsulation Resistance 绝缘阻抗≥5000 M ohm (50V DC)Rated Excitation 推荐激励电压10V DC/ACMaximum Excitation 最大激励电压15V DC/ACCable Length 导线长度6mCable Color Code 导线颜色Red(+E) Black(-E) Green(+S) White(-S)广州兰瑟陈辉编辑BSS-100kgSS称重传感器尺寸、参数图：。

实时无标记细胞功能分析仪技术参数1.*检测原理：微金电极传感器阵列整合在细胞培养板的每个细胞生长孔底部，用以构建实时、动态、定量跟踪细胞形态和增殖分化改变的细胞阻抗检测传感器系统。

当贴壁生长在微电极表面的细胞引起贴壁电极界面阻抗的改变时，这种改变与细胞的实时状态改变呈相关性，通过对阻抗值的实时检测从而获得与细胞生理功能相关的生物信息，包括细胞生长、伸展、形态变化、死亡和贴壁等2.*检测方式：实时连续的细胞检测3.*标记方式：无需标记物，细胞无损伤4.*检测环境：仪器可以长期放在二氧化碳培养箱内5.*电阻检测范围：10欧姆到5千欧姆6.电阻检测偏差（系统误差）：± (1.5% + 1 Ω)7.细胞增殖实验：实时无标记检测细胞检测细胞长时程增殖过程，包括对细胞进行基因沉默/过表达后，细胞增殖的变化过程8.细胞毒实验：实时无标记检测各种来源测试物的细胞毒性作用，例如小分子/多肽/蛋白/多糖成分；环境污染物；生物材料；病毒/微生物；甚至辐射等射线引起的细胞毒性作用。

9.细胞共培养（Co-culture）实验：通过主机配套的Insert小室，可以实时无标记考察Insert内细胞的分泌物对E-plate孔内细胞的影响，包括细胞的增殖能力变化，细胞形态变化等10.G蛋白偶联受体通路（GPCR）药物-无标记超快速筛选：是市场上唯一的实时无标记药物快速筛选的金标准，对于与细胞骨架关联的GPCR通路药物筛选时间，仅需要30min，便可确定药物对于GPCR通路的作用程度，并自动计算药物作用GPCR通路的IC50值11.细胞通透性实验：基于细胞通透性变化发生迅速且持续时间短，完整过程仅持续30min。

因此，RTCA 可以15s一次的高频率检测细胞通透性变化，从而完美描述各种因素因此的细胞通透性变化过程12.炎症模型-肥大细胞脱颗粒-市场上唯一的实时无标记快速筛选平台，通过肥大细胞与过敏原结合后，产生的大量细小粘性颗粒在系统上产生特征曲线，从而评价抗原的活性，并自动计算IC50值13.*细胞迁移实验：通过配套使用的CIM plate，可以用户自定义检测间隔，无标记检测细胞的垂直迁移过程，结果以迁移动力学曲线给出；同时CIM plate亦可拆开，将上室背面的已迁移的细胞进行染色，在显微镜下进行影像学观察。

美国SUNCELLS（MKCELLS）称重传感器参考资料DEE系列S型拉式称重传感器产品型号产品描述DEE-50kg钢制拉式S型称重传感器，SUNCELLS DEE-50kg传感器容量：50kg DEE-100kg钢制拉式S型称重传感器，SUNCELLS DEE-100kg传感器容量：100kg DEE-150kg钢制拉式S型称重传感器，SUNCELLS DEE-150kg传感器容量：150kg DEE-200kg钢制拉式S型称重传感器，SUNCELLS DEE-200kg传感器容量：200kg DEE-250kg钢制拉式S型称重传感器，SUNCELLS DEE-250kg传感器容量：250kg DEE-300kg钢制拉式S型称重传感器，SUNCELLS DEE-300kg传感器容量：300kg DEE-500kg钢制拉式S型称重传感器，SUNCELLS DEE-500kg传感器容量：500kg DEE-750kg钢制拉式S型称重传感器，SUNCELLS DEE-750kg传感器容量：750kg DEE-1t钢制拉式S型称重传感器，SUNCELLS DEE-1t传感器容量：1000kgDEE-1.2t钢制拉式S型称重传感器，SUNCELLS DEE-1.2t传感器容量：1200kg DEE-1.5t钢制拉式S型称重传感器，SUNCELLS DEE-1.5t传感器容量：1500kg DEE-2t钢制拉式S型称重传感器，SUNCELLS DEE-2t传感器容量：2000kgDEE-3t钢制拉式S型称重传感器，SUNCELLS DEE-3t传感器容量：3000kgDEE-5t钢制拉式S型称重传感器，SUNCELLS DEE-5t传感器容量：5000kgDEE-7t钢制拉式S型称重传感器，SUNCELLS DEE-7t传感器容量：7000kgPST系列S型拉式称重传感器产品型号产品描述PST-50kg钢制拉式S型称重传感器，SUNCELLS PST-50kg传感器容量：50kg PST-100kg钢制拉式S型称重传感器，SUNCELLS PST-100kg传感器容量：100kg PST-150kg钢制拉式S型称重传感器，SUNCELLS PST-150kg传感器容量：150kg PST-200kg钢制拉式S型称重传感器，SUNCELLS PST-200kg传感器容量：200kg PST-250kg钢制拉式S型称重传感器，SUNCELLS PST-250kg传感器容量：250kg PST-300kg钢制拉式S型称重传感器，SUNCELLS PST-300kg传感器容量：300kg PST-500kg钢制拉式S型称重传感器，SUNCELLS PST-500kg传感器容量：500kg PST-750kg钢制拉式S型称重传感器，SUNCELLS PST-750kg传感器容量：750kg PST-1t钢制拉式S型称重传感器，SUNCELLS PST-1t传感器容量：1000kgPST-1.2t钢制拉式S型称重传感器，SUNCELLS PST-1.2t传感器容量：1200kg PST-1.5t钢制拉式S型称重传感器，SUNCELLS PST-1.5t传感器容量：1500kg PST-2t钢制拉式S型称重传感器，SUNCELLS PST-2t传感器容量：2000kgPST-3t钢制拉式S型称重传感器，SUNCELLS PST-3t传感器容量：3000kgPST-5t钢制拉式S型称重传感器，SUNCELLS PST-5t传感器容量：5000kgPST-7t钢制拉式S型称重传感器，SUNCELLS PST-7t传感器容量：7000kgHSX-A系列波纹管式称重传感器产品型号产品描述HSX-A-5kg合金钢波纹管式称重传感器，SUNCELLS称重传感器，容量：5KG HSX-A-10kg合金钢波纹管式称重传感器，SUNCELLS称重传感器，容量：10KG HSX-A-20kg合金钢波纹管式称重传感器，SUNCELLS称重传感器，容量：20KGHSX-A-30kg合金钢波纹管式称重传感器，SUNCELLS称重传感器，容量：30KGHSX-A-50kg合金钢波纹管式称重传感器，SUNCELLS称重传感器，容量：50KGHSX-A-75kg合金钢波纹管式称重传感器，SUNCELLS称重传感器，容量：75KGHSX-A-100kg合金钢波纹管式称重传感器，SUNCELLS称重传感器，容量：100KGHSX-A-150kg合金钢波纹管式称重传感器，SUNCELLS称重传感器，容量：150KGHSX-A-200kg合金钢波纹管式称重传感器，SUNCELLS称重传感器，容量：200KGHSX-A-250kg合金钢波纹管式称重传感器，SUNCELLS称重传感器，容量：250KGHSX-A-300kg合金钢波纹管式称重传感器，SUNCELLS称重传感器，容量：300KGHSX-A-500kg合金钢波纹管式称重传感器，SUNCELLS称重传感器，容量：500KGHSX-SS系列波纹管式称重传感器产品型号产品描述HSX-SS-5kg不锈钢波纹管式称重传感器，SUNCELLS称重传感器，容量：5KGHSX-SS-10kg不锈钢波纹管式称重传感器，SUNCELLS称重传感器，容量：10KGHSX-SS-20kg不锈钢波纹管式称重传感器，SUNCELLS称重传感器，容量：20KGHSX-SS-30kg不锈钢波纹管式称重传感器，SUNCELLS称重传感器，容量：30KGHSX-SS-50kg不锈钢波纹管式称重传感器，SUNCELLS称重传感器，容量：50KGHSX-SS-75kg不锈钢波纹管式称重传感器，SUNCELLS称重传感器，容量：75KGHSX-SS-100kg不锈钢波纹管式称重传感器，SUNCELLS称重传感器，容量：100KGHSX-SS-150kg不锈钢波纹管式称重传感器，SUNCELLS称重传感器，容量：150KGHSX-SS-200kg不锈钢波纹管式称重传感器，SUNCELLS称重传感器，容量：200KGHSX-SS-250kg不锈钢波纹管式称重传感器，SUNCELLS称重传感器，容量：250KGHSX-SS-300kg不锈钢波纹管式称重传感器，SUNCELLS称重传感器，容量：300KGHSX-SS-500kg不锈钢波纹管式称重传感器，SUNCELLS称重传感器，容量：500KGIL系列箱式称重传感器柯力型号SUNCELLS型号MKCELLS型号柯力IL-1t称重传感器，SUNCELLS IL-1t传感器，MKCELLS IL-1t传感器柯力IL-2t称重传感器，SUNCELLS IL-2t传感器，MKCELLS IL-2t传感器柯力IL-50kg称重传感器，SUNCELLS IL-50kg传感器，MKCELLS IL-50kg传感器柯力IL-100kg称重传感器，SUNCELLS IL-100kg传感器，MKCELLS IL-100kg传感器柯力IL-150kg称重传感器，SUNCELLS IL-150kg传感器，MKCELLS IL-150kg传感器柯力IL-200kg称重传感器，SUNCELLS IL-200kg传感器，MKCELLS IL-200kg传感器柯力IL-250kg称重传感器，SUNCELLS IL-250kg传感器，MKCELLS IL-250kg传感器柯力IL-300kg称重传感器，SUNCELLS IL-300kg传感器，MKCELLS IL-300kg传感器柯力IL-500kg称重传感器，SUNCELLS IL-500kg传感器，MKCELLS IL-500kg传感器柯力IL-1000kg称重传感器，SUNCELLS IL-1000kg传感器，MKCELLS IL-1000kg传感器柯力IL-2000kg称重传感器，SUNCELLS IL-2000kg传感器，MKCELLS IL-2000kg传感器BTA系列桥式称重传感器柯力型号SUNCELLS型号MKCELLS型号柯力BTA-A-5t称重传感器，SUNCELLS BTA-A-5t传感器，MKCELLS BTA-A-5t传感器柯力BTA-A-10t称重传感器，SUNCELLS BTA-A-10t传感器，MKCELLS BTA-A-10t传感器柯力BTA-A-15t称重传感器，SUNCELLS BTA-A-15t传感器，MKCELLS BTA-A-15t传感器柯力BTA-A-20t称重传感器，SUNCELLS BTA-A-20t传感器，MKCELLS BTA-A-20t传感器柯力BTA-A-25t称重传感器，SUNCELLS BTA-A-25t传感器，MKCELLS BTA-A-25t传感器柯力BTA-A-30t称重传感器，SUNCELLS BTA-A-30t传感器，MKCELLS BTA-A-30t传感器柯力BTA-A-40t称重传感器，SUNCELLS BTA-A-40t传感器，MKCELLS BTA-A-40t传感器柯力BTA-A-50t称重传感器，SUNCELLS BTA-A-50t传感器，MKCELLS BTA-A-50t传感器BTA-D系列桥式数字传感器柯力型号SUNCELLS型号MKCELLS型号柯力BTA-D-5t称重传感器，SUNCELLS BTA-D-5t传感器，MKCELLS BTA-D-5t传感器柯力BTA-D-10t称重传感器，SUNCELLS BTA-D-10t传感器，MKCELLS BTA-D-10t传感器柯力BTA-D-15t称重传感器，SUNCELLS BTA-D-15t传感器，MKCELLS BTA-D-15t传感器柯力BTA-D-20t称重传感器，SUNCELLS BTA-D-20t传感器，MKCELLS BTA-D-20t传感器柯力BTA-D-25t称重传感器，SUNCELLS BTA-D-25t传感器，MKCELLS BTA-D-25t传感器柯力BTA-D-30t称重传感器，SUNCELLS BTA-D-30t传感器，MKCELLS BTA-D-30t传感器柯力BTA-D-40t称重传感器，SUNCELLS BTA-D-40t传感器，MKCELLS BTA-D-40t传感器柯力BTA-D-50t称重传感器，SUNCELLS BTA-D-50t传感器，MKCELLS BTA-D-50t传感器QS系列桥式称重传感器柯力型号SUNCELLS型号MKCELLS型号柯力QS-A-5t称重传感器，SUNCELLS QS-A-5t传感器，MKCELLS QS-A-5t传感器柯力QS-A-10t称重传感器，SUNCELLS QS-A-10t传感器，MKCELLS QS-A-10t传感器柯力QS-A-15t称重传感器，SUNCELLS QS-A-15t传感器，MKCELLS QS-A-15t传感器柯力QS-A-20t称重传感器，SUNCELLS QS-A-20t传感器，MKCELLS QS-A-20t传感器柯力QS-A-25t称重传感器，SUNCELLS QS-A-25t传感器，MKCELLS QS-A-25t传感器柯力QS-A-30t称重传感器，SUNCELLS QS-A-30t传感器，MKCELLS QS-A-30t传感器柯力QS-A-40t称重传感器，SUNCELLS QS-A-40t传感器，MKCELLS QS-A-40t传感器柯力QS-A-50t称重传感器，SUNCELLS QS-A-50t传感器，MKCELLS QS-A-50t传感器QS-D系列桥式数字传感器产品型号产品描述柯力QS-D-5t称重传感器，SUNCELLS QS-D-5t传感器，MKCELLS QS-D-5t传感器柯力QS-D-10t称重传感器，SUNCELLS QS-D-10t传感器，MKCELLS QS-D-10t传感器柯力QS-D-15t称重传感器，SUNCELLS QS-D-15t传感器，MKCELLS QS-D-15t传感器柯力QS-D-20t称重传感器，SUNCELLS QS-D-20t传感器，MKCELLS QS-D-20t传感器柯力QS-D-25t称重传感器，SUNCELLS QS-D-25t传感器，MKCELLS QS-D-25t传感器柯力QS-D-30t称重传感器，SUNCELLS QS-D-30t传感器，MKCELLS QS-D-30t传感器柯力QS-D-40t称重传感器，SUNCELLS QS-D-40t传感器，MKCELLS QS-D-40t传感器柯力QS-D-50t称重传感器，SUNCELLS QS-D-50t传感器，MKCELLS QS-D-50t传感器BTB系列压式悬臂梁式称重传感器柯力型号SUNCELLS型号MKCELLS型号柯力BTB-A-0.3t称重传感器，SUNCELLS BTB-0.3t传感器，MKCELLS BTB-0.3t传感器柯力BTB-A-0.5t称重传感器，SUNCELLS BTB-0.5t传感器，MKCELLS BTB-0.5t传感器柯力BTB-A-1t称重传感器，SUNCELLS BTB-1t传感器，MKCELLS BTB-1t传感器柯力BTB-A-2t称重传感器，SUNCELLS BTB-2t传感器，MKCELLS BTB-2t传感器柯力BTB-A-3t称重传感器，SUNCELLS BTB-3t传感器，MKCELLS BTB-3t传感器，柯力BTB-A-5t称重传感器，SUNCELLS BTB-5t传感器，MKCELLS BTB-5t传感器柯力BTB-A-7.5t称重传感器，SUNCELLS BTB-7.5t传感器，MKCELLS BTB-7.5t传感器柯力BTB-A-8t称重传感器，SUNCELLS BTB-8t传感器，MKCELLS BTB-8t传感器柯力BTB-A-10t称重传感器，SUNCELLS BTB-10t传感器，MKCELLS BTB-10t传感器柯力BTB-A-15t称重传感器，SUNCELLS BTB-15t传感器，MKCELLS BTB-15t传感器柯力BTB-A-20t称重传感器，SUNCELLS BTB-20t传感器，MKCELLS BTB-20t传感器柯力BTB-A-25t称重传感器，SUNCELLS BTB-25t传感器，MKCELLS BTB-25t传感器BTB系列压式悬臂梁式称重传感器柯力型号SUNCELLS型号MKCELLS型号柯力BTB-D-0.3t称重传感器，SUNCELLS BTB-0.3t传感器，MKCELLS BTB-0.3t传感器柯力BTB-D-0.5t称重传感器，SUNCELLS BTB-0.5t传感器，MKCELLS BTB-0.5t传感器柯力BTB-D-1t称重传感器，SUNCELLS BTB-1t传感器，MKCELLS BTB-1t传感器柯力BTB-D-2t称重传感器，SUNCELLS BTB-2t传感器，MKCELLS BTB-2t传感器柯力BTB-D-3t称重传感器，SUNCELLS BTB-3t传感器，MKCELLS BTB-3t传感器，柯力BTB-D-5t称重传感器，SUNCELLS BTB-5t传感器，MKCELLS BTB-5t传感器柯力BTB-D-7.5t称重传感器，SUNCELLS BTB-7.5t传感器，MKCELLS BTB-7.5t传感器柯力BTB-D-8t称重传感器，SUNCELLS BTB-8t传感器，MKCELLS BTB-8t传感器柯力BTB-D-10t称重传感器，SUNCELLS BTB-10t传感器，MKCELLS BTB-10t传感器柯力BTB-D-15t称重传感器，SUNCELLS BTB-15t传感器，MKCELLS BTB-15t传感器柯力BTB-D-20t称重传感器，SUNCELLS BTB-20t传感器，MKCELLS BTB-20t传感器柯力BTB-D-25t称重传感器，SUNCELLS BTB-25t传感器，MKCELLS BTB-25t传感器SB系列压式悬臂梁式称重传感器柯力型号SUNCELLS型号MKCELLS型号柯力SB-A-0.3t称重传感器，SUNCELLS SB-0.3t传感器，MKCELLS SB-0.3t传感器柯力SB-A-0.5t称重传感器，SUNCELLS SB-0.5t传感器，MKCELLS SB-0.5t传感器柯力SB-A-1t称重传感器，SUNCELLS SB-1t传感器，MKCELLS SB-1t传感器柯力SB-A-2t称重传感器，SUNCELLS SB-2t传感器，MKCELLS SB-2t传感器柯力SB-A-3t称重传感器，SUNCELLS SB-3t传感器，MKCELLS SB-3t传感器，柯力SB-A-5t称重传感器，SUNCELLS SB-5t传感器，MKCELLS SB-5t传感器柯力SB-A-7.5t称重传感器，SUNCELLS SB-7.5t传感器，MKCELLS SB-7.5t传感器柯力SB-A-8t称重传感器，SUNCELLS SB-8t传感器，MKCELLS SB-8t传感器柯力SB-A-10t称重传感器，SUNCELLS SB-10t传感器，MKCELLS SB-10t传感器柯力SB-A-15t称重传感器，SUNCELLS SB-15t传感器，MKCELLS SB-15t传感器柯力SB-A-20t称重传感器，SUNCELLS SB-20t传感器，MKCELLS SB-20t传感器柯力SB-A-25t称重传感器，SUNCELLS SB-25t传感器，MKCELLS SB-25t传感器SQB系列压式悬臂梁式称重传感器柯力型号SUNCELLS型号MKCELLS型号柯力SQB-A-3t称重传感器，SUNCELLS SQB-A-3T传感器，MKCELLS SQB-A-3T传感器柯力SQB-A-5t称重传感器，SUNCELLS SQB-A-5T传感器，MKCELLS SQB-A-5T传感器柯力SQB-A-7.5t称重传感器，SUNCELLS SQB-A-7.5T传感器，MKCELLS SQB-A-7.5T传感器柯力SQB-A-10t称重传感器，SUNCELLS SQB-A-10T传感器，MKCELLS SQB-A-10T传感器NHS系列扭环式称重传感器柯力型号SUNCELLS型号MKCELLS型号柯力NHS-1t称重传感器，SUNCELLS NHS-A-1t传感器，MKCELLS NHS-1T传感器柯力NHS-2.2t称重传感器，SUNCELLS NHS-A-2.2t传感器，MKCELLS NHS-2.2t传感器柯力NHS-3.3t称重传感器，SUNCELLS NHS-A-3.3t传感器，MKCELLS NHS-3.3T传感器柯力NHS-4.7t称重传感器，SUNCELLS NHS-A-4.7t传感器，MKCELLS NHS-4.7T传感器柯力NHS-10t称重传感器，SUNCELLS NHS-A-10t传感器，MKCELLS NHS-10T传感器柯力NHS-15t称重传感器，SUNCELLS NHS-A-15t传感器，MKCELLS NHS-15T传感器柯力NHS-22t称重传感器，SUNCELLS NHS-A-22t传感器，MKCELLS NHS-22T传感器柯力NHS-33t称重传感器，SUNCELLS NHS-A-33t传感器，MKCELLS NHS-33T传感器柯力NHS-47t称重传感器，SUNCELLS NHS-A-47t传感器，MKCELLS NHS-47T传感器柯力NHS-68t称重传感器，SUNCELLS NHS-A-68t传感器，MKCELLS NHS-68T传感器柯力NHS-100t称重传感器，SUNCELLS NHS-A-100t传感器，MKCELLS NHS-100T传感器柯力NHS-150t称重传感器，SUNCELLS NHS-A-150t传感器，MKCELLS NHS-150T传感器NHS系列扭环式数字传感器柯力型号SUNCELLS型号MKCELLS型号柯力NHS-1t称重传感器，SUNCELLS NHS-D-1t传感器，MKCELLS NHS-1T传感器柯力NHS-2.2t称重传感器，SUNCELLS NHS-D-2.2t传感器，MKCELLS NHS-2.2t传感器柯力NHS-3.3t称重传感器，SUNCELLS NHS-D-3.3t传感器，MKCELLS NHS-3.3T传感器柯力NHS-4.7t称重传感器，SUNCELLS NHS-D-4.7t传感器，MKCELLS NHS-4.7T传感器柯力NHS-10t称重传感器，SUNCELLS NHS-D-10t传感器，MKCELLS NHS-10T传感器柯力NHS-15t称重传感器，SUNCELLS NHS-D-15t传感器，MKCELLS NHS-15T传感器柯力NHS-22t称重传感器，SUNCELLS NHS-D-22t传感器，MKCELLS NHS-22T传感器柯力NHS-33t称重传感器，SUNCELLS NHS-D-33t传感器，MKCELLS NHS-33T传感器柯力NHS-47t称重传感器，SUNCELLS NHS-D-47t传感器，MKCELLS NHS-47T传感器柯力NHS-68t称重传感器，SUNCELLS NHS-D-68t传感器，MKCELLS NHS-68T传感器柯力NHS-100t称重传感器，SUNCELLS NHS-D-100t传感器，MKCELLS NHS-100T传感器柯力NHS-150t称重传感器，SUNCELLS NHS-D-150t传感器，MKCELLS NHS-150T传感器。

OAP称重传感器OAP称重传感器产品特性描述：OAP SQB称重传感器SQB-1t 采用合金钢材料全密封焊接，表面镀镍，防油、防水、防一般腐蚀性气体及介质，可适用于多种环境。

OAP SQB称重传感器SQB-1t 适用于平台秤、配料控制系统、低平台秤。

OAP SQB称重传感器可满足0.3t～25t量程范围内的精确测量，OAP SQB 称重传感器SQB-1t SQBxi具体量程SQB-0.25t,SQB-0.5t,SQB-0.75t,SQB-1t,SQB-1.5t,SQB-2t,SQB-2.5t,SQB-3t,SQB-5t,SQB-7.5t,SQB-10 t ；OAP SQB-1t 称重传感器安装方便，性能可靠，精度高，OAP SQB-1t 是属于双剪切梁结构设计，适用于平台秤、配料控制系统、低平台秤、电子汽车衡、轨道衡等各类电子称重设备。

OAP SQB 称重传感器热销型号SQB-1t , SQB-500kg , SQB-1.5t , SQB-5t 。

OAP称重传感器产品特性描述OAP DEE称重传感器DEE-250KG 采用合金钢材料制造，内部灌胶密封，防油、防水、耐腐蚀，可适用于各种环境;OAP DEE称重传感器DEE-250KG 是S型梁结构设计，拉压双向承载，安装使用方便灵活; OAP DEE-250KG 称重传感器适用于吊钩秤、皮带秤、配料系统、包装秤、机电结合秤及专用测力装置、吊钩秤、机改秤、料斗秤等各类电子称重设备。

OAP DEE 系列热销型号：DEE-250KG , DEE-500KG , DEE-3T 。

OAP称重传感器产品特性描述OAP BTB梁式称重传感器BTB-5T 是双剪切梁结构设计，适用于平台秤、配料控制系统、低平台秤、电子汽车衡、轨道衡等各类电子称重设备，再加上OAP BTB梁式称重传感器BTB-5T 采用合金钢材料，高精度，表面镀镍，安装方便，性能可靠，全密封焊接，防油、防水、防一般腐蚀性气体及介质，可适用于多种环境。