YE5872功率放大器使用说明书

Stereo Power Amplifiers Models: PLA300, PLA500 & PLA900Safety InformationThe lightning bolt within a triangle is intended to alert the user to the presence of un insulated dangerous voltage levels within the product’s enclosure. This voltage may be of sufficient magnitude to constitute an electric shock risk. To reduce the risk of electricshock, do not remove coverof this device. There are nouser serviceable partsinside. Refer servicing onlyto qualified servicepersonnel.The exclamation pointwithin a triangle isintended to alert theuser to importantoperating andmaintenance(servicing)instructions in theliteratureaccompanying theappliance.Safety Precautions• Read and retain these instructions• Follow all instructions and heed warnings• Do not use this device near water• If the surface becomes dirty, clean only with dry cloth, do not use solvents or thinners• Install in accordance with the manufacturer’s instructions• Do not block ventilation openings• Do not install near heat sources such as radiators, heat registers, stoves, or other devices that produce heat• Do not defeat the safety purpose of the grounded plug. This plug has twoblades and a third ground prong. The wide blade or third prong are provided for your safety. If the provided plug does not fit into your outlet, consult anelectrician for replacement of the obsolete outlet• Protect the power cord from being stressed at the plugs, conveniencereceptacles, and where they exit the amplifier• Only use accessories specified by the manufacturer• Unplug the device during lightning storms or when unused for an extended time• Refer all servicing to qualified personnel• This device must not be exposed to water in any way. No object filled withliquids should be placed on apparatusCongratulations on your purchase of thisPulse PLA Series Stereo Power AmplifierThis amplifier was designed specifically for use in permanent audio installations or mobile sound reinforcement scenarios, where high reliability and premium sound quality are a must. Highly rugged construction and high efficiency design make this amplifier perfect for continuous duty applications in situations were power will be left on for indefinite periods of time.This amplifier is warranted from defects for one year from the date of purchase. Should your amplifier require service, either within or beyond that warranty period, please contact your Pulse **************************************************.uk.This unit includes a host of features, along with an impressive list of specifications, which are detailed over the next pages. Please take the time to read this document completely prior to installation of this product. Should you have questions regarding installation or operation of this unit, please contact the Pulse Technical Support Department.Features∙240W, 460W & 760W versions∙Class AB amplifiers∙Detented rotary volume controls∙Signal, clip, protect & power LED indicators∙LED VU meter for signal level monitoring∙Delayed switch on to help prevent speaker/amplifier damage∙Over temperature and neutral DC protection∙Rugged steel enclosures with front 19” rack mount ears∙Signal Inputs: 2x 6.35mm (1/4”) unbalanced jack sockets∙Speaker Outputs: 2x Locking speaker socketsSpecificationsApplications∙Live Music, DJ or Installation∙Ideal for powering large speaker cabinets or multiple cabinets in high level sound reinforcement∙This product is designed for professional or commercial use only and is not designed to be used in a domestic environment.Connections / Controls1)Channel 2 speaker output via locking speaker socket. (Use terminals 1+1-only, minimum speaker impedance 4Ω)2)Signal input for Channel 2, via unbalanced 6.35mm (1/4”) jack.3)Air ventilation port – DO NOT BLOCK.4)Channel 1 speaker output via locking speaker socket. (Use terminals 1+1-for Channel 1, and terminals 2+2- for Channel 2, minimum speakerimpedance 4Ω per channel)5)Signal input for Channel 1, via unbalanced 6.35mm (1/4”) jack.6)IEC Mains Inlet – Use only the supplied power cord or suitablereplacement with the correct fuse rating.7)Mains Voltage Switch – This product features a dual voltage power supply.For use within Europe this must be set to the 220-240Vac position.Incorrect selection of mains voltage input will cause the amplifier to failand will not be covered by the standard warranty.Operation:∙All connections to the amplifier should be made while the power is turned off and the attenuators/volume controls are set to the “0” or minimum position.∙As with all amplifiers the connected devices should be powered on in the correct order. When powering up, the amplifier should be the last to beswitched on, when powering down, please ensure the amplifier is switched off first.∙The Pulse PLA series features Signal Clip LED’s to indicate when the amplifier is within 3dB of “clipping”. This indicates the amplifier is receiving itsmaximum input signal and the gain at source should now be reduced.∙Clipped signals are harmful to speakers and amplifiers, they will also sound “distorted” to the ear. Care should be taken to avoid clipping the signal at any point during the signal flow.∙The amplifier features a PROTECT mode indicated by the LED on the front panel. Should the amplifier enter PROTECT mode at any point please switchoff the amplifier immediately. Once powered down the input signal should be turned down to the minimum and the load (speakers) disconnected. At thisstage the speakers and output cabling should be checked for faults/damageand if they are in good working order may be reconnected. The amplifier canthen be powered up again and the input signal increased. Should the amplifier remain in PROTECT mode permanently this indicates a fault and the amplifier will require servicing or repair by an engineer.∙The input connectors on the Pulse PLA series are standard 2-pole unbalanced6.35mm (1/4”) jack sockets.∙Choose speaker cables carefully – please use cables with cores of minimum1.5mm2 and under 10m in length to prevent power loss.∙Check all cables (speaker, signal and mains) for damage, loose terminals or potential short circuits on regular occasions.∙Speaker wires carry high voltages; care should be taken to ensure no bare wires can be touched as this may result in electric shock.∙The Pulse PLA Series features a dual use locking speaker connector on OutputA – this allows both amplifier channels to be accessed using one standardlocking speaker connector. Pins 1+1- are connected to Channel A, pins 2+2- are connected to Channel B.∙Do not use these amplifiers in damp or high humidity environments. Do not use outdoors or anywhere where liquids could fall or splash onto the amplifier. ∙Ensure the amp is adequately ventilated, with free airflow around the front and rear panels. Keep away from other heat sources. If the amps aremounted in a rack with other amps, ensure there is adequate cool air flowfront and rear. Note that air is drawn in through the front panel, andexhausted through the rear panel.∙NEVER cover the amplifiers, as they may overheat.∙PULSE power amplifiers are designed to fit standard 19” racks, with a 2U height and 14.5” depth (not including space for connectors & cables)∙Ensure that the AC power supply is correct for your amplifier. The required AC supply is stated on the rear panel next to the AC power input.∙Ensure that you use the correct type of mains lead for your equipment and country. This must be free from damage and easily accessible during use.∙Keep away from magnetic recording media (tape, mini disc, hard drive etc).Power amplifiers produce an electromagnetic field, which could affect stored files.∙Sound reinforcement systems can produce levels of sound that have the potential to damage a person’s hearing. Please operate this equipment with due care and diligence. If you are in any doubt of the correct operatingvolume for any speaker/amplifier system, please seek advice from a audio industry professional of suitable qualification to advise on Sound Levels. We also advise the use of good quality decibel meters to ensure sound levels are maintained. In the UK the Health & Safety Executive will be able to offeradvise regarding Noise in the Workplace.ComplianceWhen this product reaches the end of its life, do not dispose with household waste. Please dispose of PULSE products in an environmentally sound fashion, or contact PULSE directly via WarrantyPulse products are warranted, by Pulse, against manufacturer defects for a period of one year from the original date of purchase. This warranty is limited to manufacturer defects, in either materials or workmanship. Pulse, or any other worldwide divisions of Premier Farnell PLC, are not responsible for any consequential or inconsequential damage to any other component, structure or the cost of installation or removal of said items.This warranty will not cover damage due to improper use such as (and not limited to) damaged cones, mounting frames, voice coils or items damaged by weather or moisture ingress/exposure.For questions or specific information regarding warranty replacement or repair, contact:PULSE。

航空发动机构造及强度课程实验指导书艾延廷赵永健编沈阳航空工业学院2006 年 6 月前言航空发动机构造及强度是飞行器动力工程专业的骨干专业课程，主要讲授航空发动机主要部件及典型结构，讲授整机及叶片、轮盘等部件的强度振动分析和计算方法，最后讲授航空发动机转子临界转速，航空发动机结构完整性等方面的内容。

轮盘和叶片是航空发动机中的典型部件和零件，研究轮盘应力分布规律、叶片振动振型及固有频率等参数的测量和分析，是航空发动机设计、研制中的关键技术，因此本课程开设“旋转圆盘应力实验”和“叶片振动应力测试实验”两个实验具有代表性，对有关课程的学习具有较好的支撑作用。

本实验指导书是配合该课程实验而编写的。

“旋转圆盘应力实验”是必做实验。

实验的目的是测出等厚、等温、空心、无外载的圆盘旋转时的径向及周向应力沿半径的分布规律，并与计算结果对比分析。

通过实验使学生掌握旋转件应力测试及分析方法；学会使用旋转圆盘应力实验的设备及仪器。

“叶片振动应力测试实验”是综合型、必做实验。

内容为测量并分析等截面叶片弯曲振动及扭转振动的自振频率、振型；验证固有频率计算理论。

该实验的目的是使学生加强对叶片振动理论的理解；掌握叶片振动实验的激振和拾振方法，学会使用李沙育图形法判断叶片共振状态的方法。

通过该实验可使学生进一步理解叶片振动理论，掌握叶片振动的实验研究方法。

本课程实验要求学生进行实验预习，预先掌握INV306D(M)智能信号采集处理分析仪的使用方法，认真回答实验思考题。

目录实验1 旋转圆盘应力实验 (1)1. 实验目的 ............................................................................................................................ 1`2. 实验原理 (1)3. 实验仪器设备 (3)4. 实验步骤 (4)5. 思考题 (4)6. 实验报告要求 (4)实验2 叶片振动应力测试实验 (7)1. 实验目的 (7)2. 实验原理 (7)3. 实验仪器设备 (10)4. 实验步骤 (11)5. 思考题 (13)6. 实验报告要求 (13)实验1 旋转圆盘应力实验1. 实验目的（1） 了解旋转圆盘应力实验的设备和方法，掌握应用电阻应变片测量旋转圆盘离心应力的实验原理和实验技术。

TC8871(文件编号：S&CIC1058)5W 单通道F 类音频功率放大器一、概述TC8871是一款无FM 干扰，AB 类/D 类可选式功率放大器。

5V 工作电压时，最大驱动功率为5W （2Ω，BTL 负载，THD>10%）。

TC8871的应用电路简单，只需极少数外围器件，集成反馈电阻；输出不需要外接耦合电容或上举电容和缓冲网络。

TC8871采用ESOP 封装，特别适合用于小音量、小体重的便携系统中。

可以通过控制进入休眠模式，从而减少功耗。

TC8871内部具有过热自动关断保护机制；工作稳定，增益带宽积高达2.5MHz ，并且单位增益稳定。

反馈电阻内置，通过配置外围参数可以调整放大器的电压增益及最佳音质效果，方便应用。

是您USB 低音炮及扩音器完美的解决方案。

二、特点对FM 无干扰，高效率，音质优输出功率高（THD ＋N<10%，1KHz 频率)：ESOP 封装的为5W （2Ω负载）和3.5W （3Ω负载），3W （4Ω负载） 掉电模式漏电流小 采用ESOP 封装外部增益可调，集成反馈 宽工作电压范围2.0V~5.0V不需驱动输出耦合电容、自举电容和缓冲网络 单位增益稳定兼容SC4871、SC8002B三、产品应用手提电脑台式电脑低压音响系统、USB 、2.1/2.0多媒体音响四、引脚图及引脚说明TC8871(文件编号：S&CIC1058)5W 单通道F 类音频功率放大器七、电气参数八、TC8871D 类模式应用说明MODE 功能TC8871是一款AB 类/Ｄ类可选的音频功率放大器，通过MODE 功能键可对功放进行ＡＢ类Ｄ类的选择。

MODE 芯片功能模式高电平D 类功率放大器低电平AB 类功率放大器输入电阻（Ri ）通过选择输入电阻的参数值可以配置放大器的增益：阻抗匹配对于放大器来说很重要，输出与反馈的平衡取决于电路的阻抗匹配情况，CMRR ，PSRR 和二次谐波失真的消除也可以得到优化。

Bulletin HY11-5715-484/UKPower Amplifier for Flow ValvesInstallation Manual Series ET102Parker Hannifin GmbH Hydraulic Controls Division Gutenbergstr. 3841564 Kaarst, Germany Tel.:+49-181 99 44 43 0Fax:+49-2131-513-230E-mail:******************Copyright2002, Parker Hannifin GmbH2IA ET102 UK A5.PM6.5 CMPower Amplifier for Flow Valves Series ET102Installation ManualParker Hannifin GmbH Hydraulic Controls DivisionNoteThis document and other information from Parker Hannifin GmbH, its subsidiaries, sales offices and authorized distributors provide product or system options for further investigation by users having technical expertise. Before you select or use any product or system it is important that you analyse all aspects of your application and review the information concerning the product or system in the current product catalogue. Due to the variety of operating conditions and applications for these products or systems, the user, through his own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance and safety requirements of the application are met. The products are subject to change by Parker Hannifin GmbH at any time without notice.Power Amplifier for Flow Valves Series ET102Installation Manual3IA ET102 UK A5.PM6.5 CMParker Hannifin GmbH Hydraulic Controls DivisionElectronic module for the control of proportional throttle valves. The valve opening and its changes are determined by externally applied command signals. The measured value (Volts) on the mod-ule is indirectly proportional with the throttle opening or alternatively the resulting volume flow Q (l/min).Features •Processing and amplification of the externally supplied positive commands into output sig-nals for the control solenoid.•Can be combined with EZ150 or external pro-grammable control.•Pulsed amplifier power stage with constant current control.•Dither generator with applied frequency to improve static characteristics.•Diagnosis by means of diagnostic sockets as well as light diodes for indicating working con-ditions.Ordering CodeDesign SeriesModule Type Amplifier for command signal inputElectronic Module Flow ValveValve SizeCode ValveSolenoid F E16 to E 5035mm F E16 to E 5035mm F E63 to E10060mm 99F E63 to E10060mmConnection 31 pole male connector, DIN 41617Power supplyfiltered: 22–38V, unfiltered: 18–26V Command voltage 0 to +10 DC Input select voltage 5 to 30VDC Power required 40VAReference outputs+10VDC 10mAMax. solenoid output current 1.3A with 10V command Ambient temperature 0 to 70°C Rampsnot availableShield. cable connection Supply connections+valve: AWG15Commands: AWG20Fuse2A medium lag, DIN 41571/5x20mmCharacteristics4Power Amplifier for Flow Valves Series ET102Installation ManualParker Hannifin GmbH Hydraulic Controls DivisionPower Amplifier for Flow Valves Series ET102Installation Manual5IA ET102 UK A5.PM6.5 CMParker Hannifin GmbH Hydraulic Controls DivisionDimensions (Eurocard)A Operating and Diagnostic Elements (Elevation A)Notes:Turn off the electrical power to this board whenever the hydraulic supply to the valve is not on.Always turn off the power to this board before removing it from the card holder.Only potential-free measuringequipment to be usedGreen grip strip with reference information for measured valuesRed socket for current diagnostic Red LED forindicating function of control solenoid Black socket for current diagnostic6IA ET102 UK A5.PM6.5 CMPower Amplifier for Flow Valves Series ET102Installation ManualParker Hannifin GmbH Hydraulic Controls DivisionInstallation guide to electronic modules to provision of electromagnetic compatibility Power SupplyThe utilized power supply has to comply with the EMC-standards (CE-sign, certificate of confor-mity).Relais and solenoids operating from the same supply circuit as the valve electronics have to be fitted by surge protection elements.Wiring CableThe wires between the installation site of the module and the peripheral units, as power supply,valve solenoids, command signal source have to be shielded. The following wire sizes must be reached: power supply AWG 16, other connec-tions AWG 20. The capacity should not exceed a value of approx. 130 pF/m (wire/wire). The maxi-mum cable length is 50 m. No power current lines may be placed within the wired shielded cables to the electronic module. The cable shield has to be connected to ground at both ends (see also chapter “Grounding“). Please be aware of ground loops.InstallationThe module has to be mounted within a conduc-tive, shielded enclosure. Usable is i.e. an EMC-approved control cabinet. A perfect grounding of the enclosure is mandatory (see also chapter “Grounding“).GroundingThe mounting plate of the valve has to be con-nected to the grounded metal machine frame. The cable shields must be tied to ground at the control cabinet. A low-ohmic potential compensation wire has to be provided between the control cabinet and the machine frame (cable wire >AWG 7 cross section) to prevent ground loops.。

OwnerÊs Manual 使用说明书RB-1581Bridged Mono Power Amplifier单声道后置放大器WARNING: There are no user serviceable parts inside. Refer allservicing to qualified service personnel.WARNING: To reduce the risk of fire or electric shock, do not expose the unit to moisture or water. Do not expose the unit to dripping or splashing. Do not place objects filled with liquids, such as vases, on the unit. Do not allow foreign objects to get into the enclosure. If the unit is exposed to moisture, or a foreign object gets into the enclosure, immediately disconnect the power cord from the wall. Take the unit to a qualified service person for inspection and necessary repairs.Read all the instructions before connecting or operating the component.Keep this manual so you can refer to these safety instructions.Heed all warnings and safety information in these instructions and on the product itself. Follow all operating instructions.Clean the enclosure only with a dry cloth or a vacuum cleaner.Do not use this unit near water.You must allow a minimum 10 cm or 4 inches of unobstructedDo not place the unit on a bed, sofa, rug, or similar surface that could block the ventilation openings. If the unit is placed in a bookcase or cabinet, there must be ventilation of the cabinet to allow proper cooling.Keep the component away from radiators, heat registers, stoves, orany other appliance that produces heat.Rotel products are designed to comply with international directives on the Restriction of Hazardous Substances (RoHS) in electrical and electronic equipment and the disposal of Waste Electrical and Electronic Equipment (WEEE). The crossed wheelie bin symbol indicates compliance and that the products must be appropriately recycled or processed in accordance with these directives.Important Safety InstructionsWARNING: The rear panel power cord connector is the mains power disconnect device. The apparatus must be located in an open area that allows access to the cord connector.The unit must be connected to a power supply only of the type and voltage specified on the rear panel. (USA: 120 V/60Hz, EC: 230V/50Hz)Connect the component to the power outlet only with the supplied power supply cable or an exact equivalent. Do not modify the supplied cable. A polarized plug has two blades, with one wider than the other. A grounding plug has two blades plus a third grounding prong. These are provided for your safety. Do not defeat grounding and/or polarization safety provisions. If the supplied plug does not fit your outlet, please consult an electrician for replacement of the obsolete outlet. Do not use extension cords.The main plug of the power cordset is a disconnect device of the apparatus. In order to completely disconnect the apparatus from the supply mains, the main plug of the power cordset should be unplugged from the mains (AC) outlet. The stand-by LED indicator will not be lit up to show the power cord is unplugged. The disconnect device shall remain readily operable.Do not route the power cord where it will be crushed, pinched, bent, exposed to heat, or damaged in any way. Pay particular attention to the power cord at the plug and where the cord exits the back of the unit.The power cord should be unplugged from the wall outlet during a lightning storm or if the unit is to be left unused for a long period of time.This apparatus shall be connected to a main socket outlet with a protective earth connection.Use only accessories specified by the e only with a cart, stand, rack, bracket or shelf system recommended by Rotel. Use caution when moving the unit in a stand or rack to avoid injury from a tip-over.Use Class 2 wiring for speaker connections to ensure proper insulation and minimize the risk of electric shock.Immediately stop using the component and have it inspected and/or serviced by a qualified service agency if:Ć The power supply cord or plug has been damagedĆ Objects have fallen or liquid has been spilled into the unit Ć The unit has been exposed to rainĆ The unit shows signs of improper operationĆ The unit has been dropped or damaged in any wayPin AssignmentsBalanced Audio (3 pole XLR):Pin 1: Ground / Screen Pin 2: In phase / +ve / Hot Pin 3: Out of phase / -ve / ColdFigure 1: Controls and ConnectionsFigure 2: Hook-up Illustration3UHDPSImportant NotesWhen making connections be sure to:Turn off all the components in the system before hooking up any components, including loudspeakers.Turn off all components in the system before changing any of the connections to the system.It is also recommended that you:Turn the volume control of the amplifier all the way down before the amplifier is turned on or off.Remarques importantesPendant les branchements, assurez-vous que :Tous les maillons sont éteints avant leur branchement, quels quÊils soient, y compris les enceintes acoustiques.Éteignez tous les maillons avant de modifier quoi que ce soit au niveau de leurs branchements, quels quÊils soient.Il est également recommandé de :Toujours baissez le niveau sonore via le contrôle de volume, avant dÊallumer ou dÊéteindre lÊamplificateur.Wichtige HinweiseAchten Sie beim Herstellen der Verbindungen auf Folgendes:Schalten Sie alle Komponenten im System ab, bevor Sie Geräte (einschließlich Lautsprecher) anschließen.Schalten Sie alle Komponenten im System ab, bevor Sie Anschlüsse im System verändern.Ferner empfehlen wir, dassSie die Lautstärke herunterdrehen, bevor Sie den Verstärker ein- oder ab schalten.Notas ImportantesCuando realice las conexiones, asegúrese de que:Desactiva todos los componentes del equipo, cajas acústicas incluidas, antes de conectar cualquier nuevo componente en el mismo. Desactiva todos los componentes del equipo antes de cambiar cualquier conexión del mismo.También le recomendamos que:Reduzca el nivel de volumen de su amplificador a cero antes de activarlo o desactivarlo.Héél belangrijkBij het maken van de verbindingen:Zorg dat niet alleen de RB-1581, maar de gehele installatie uitstaat, als nog niet alle verbindingen gemaakt zijn.Zorg dat niet alleen de RB-1581, maar de gehele installatie ook uitstaat, als u verbindingen gaat wijzigen.Wij raden u ook aan omde volumeregelaar van de (voor)versterker geheel dicht te draaien (volkomen linksom) wanneer u uw eindversterker aan- of uitzet. Note importantiQuando effettuate i collegamenti assicuratevi di:Spegnere tutti i componenti del sistema prima di collegare qualsiasi componente, inclusi i diffusori.Spegnere tutti i componenti del sistema prima di modificare qualsiasi connessione nel sistema.Vi raccomandiamo inoltre di:Portare il volume a zero prima di accendere o spegnere lÊamplificatore.ViktigtTänk på följande när du gör anslutningar:Stäng av alla apparater i anläggningen innan du ansluter nya komponenter eller högtalare.Stäng av alla apparater i anläggningen innan du ändrar någon anslutning.Du rekommenderas också:Vrida ner volymen på förförstärkaren helt och hållet innan förstärkaren slås på eller av.è ‰ ÔÓ‰ÒÓ‰ËÌÂÌËÂÏ:Ç˚Íβ˜ËÚ ‚Ò ÍÓÏÔÓÌÂÌÚ˚, ‚Íβ˜‡fl ÍÓÎÓÌÍË.Ç˚Íβ˜ËÚ ‚Ò ÍÓÏÔÓÌÂÌÚ˚ ‚ ‚‡¯ÂÈ ÒËÒÚÂÏÂ, Ô Âʉ ˜ÂÏ ˜ÚÓ-ÚÓ ‚ ÌÂÈ ÏÂÌflÚ¸.êÂÍÓÏẨÛÂÚÒfl Ú‡ÍÊÂ:Ç˚‚ÂÒÚË … ÓÏÍÓÒÚ¸ ÛÒËÎËÚÂÎfl ̇ ÏËÌËÏÛÏ, Ô ‰ ÚÂÏ Í‡Í ‚Íβ˜‡Ú¸ ËÎË ‚˚Íβ˜‡Ú¸ Â…Ó.(not digital) amplifiers are up to five times more efficient than our legacy designs and still deliver power and performance. These products run cool, give minimum wasted energy, are good for the environment and give better sound too.Finally, we have printed this brochure on recycled paper stock.While we understand that these are small first steps, they are still important ones. And we continue to pursue new methods and materials for a cleaner and greener manufacturing process.All of us at Rotel thank you for buying this product. We are sure it will bring you many years of enjoyment.A Word About WattsThe RB-1581 power output is quoted as 500 watts in 8 ohms load, when it is operating at full power.Rotel has chosen to specify the power output in this way because, in RotelÊs experience, it gives the truest value of the receiver or amplifierÊs power capability.When comparing specifications for different products, you should be aware that power output is often specified in other ways, so you may not be comparing like with like.For example, the power output may be quoted with only one channel operating, giving a higher maximum figure. The highly regulated power supplies of the Rotel amplifiers ensures that they will produce the full specified power output to one or all channels.A loudspeakerÊs impedance rating indicates the electrical resistance or load it offers when connected to the amplifier, usually 8 ohms or 4 ohms. The lower the impedance, the more power the speaker will need. In effect, a 4 ohm speaker will require twice as much power as an 8 ohm speaker.However, Rotel amplifiers are designed to work into any speaker impedance between 8 and 4 ohms, and with all the channels working up to their full power. Because the Rotel design is optimized for use with all channels operating together, Rotel is able to specify the true power output for all channels.Getting StartedThank you for purchasing the Rotel RB-1581 Bridged Mono Power Amplifier. When used in a high-quality music or home theater system, your Rotel product will provide years of musical enjoyment.The RB-1581 is a high-power amplifer, providing the highest level of audio performance. A massive power supply, premium components, and RotelÊs Balanced Design ensure superb sound quality. High current capability allows the RB-1581 to drive the most demanding loudspeakers.A Few PrecautionsWARNING: To avoid potential damage to your system, turn off ALL the components in the system when connecting or disconnecting the loudspeakers or any associated components. Do not turn the system components back onContentsImportant Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Figure 1: Controls and Connections 3Figure 2: Hook-up Illustration 4Important Notes 5About Rotel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6A Word About Watts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6A Few Precautions 6Placement 7AC Power and Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7AC Power Input 8 7Power Switch and Power Indicator 1 7Protection Indicator 2 7Trigger On/Off Mode Selector 5 712V Trigger Input and Output 4 7Input Signal Connections 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Input Selector Switch 8Speaker Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Speaker Selection 8Speaker Wire Selection 8Polarity and Phasing 8Speaker Connection 6 8Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Power Indicator Is Not Illuminated 9Fuse Replacement 7 9No Sound 9Protection Indicator Is Illuminated 9Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9About RotelOur story began over 50 years ago. Over the decades, we have received hundreds of awards for our products and satisfied hundreds of thousands of people who take their entertainment seriously- like you!Rotel was founded by a family whose passionate interest in music led them to manufacture high-fidelity components of uncompromising quality. Through the years, that passion has remained undiminished and the family goal of providing exceptional value for audiophiles and music lovers, regardless of their budget, is shared by all Rotel employees.RotelÊs engineers work as a close team, listening to, and fine tuning, each new product until it reaches their exacting musical standards. They are free to choose components from around the world in order to make that product the best they can. You are likely to find capacitors from the United Kingdom and Germany, semiconductors from Japan or the United States, while toroidal power transformers are manufactured in RotelÊs own factory.We all have concerns about our environment. And, as more and more electronics are produced and later discarded, it is especially important for a manufacturer to do all it can to engineer products that have a minimum negative impact on landfill sites and water tables.At Rotel, we are proud to do our part. We have reduced the lead content in our electronics by using special ROHS solder, while our new Class Duntil you are sure all the connections are correct and secure. Pay particular attention to the speaker wires. There must be no loose strands that could contact the other speaker wires, or the chassis of the amplifier.Please read this manual carefully. In addition to basic installation and operating instructions, it provides valuable information on various RB-1581 system configurations as well as general information that will help you get optimum performance from your system. Please contact your authorized Rotel dealer for answers to any questions you might have. In addition, all of us at Rotel welcome your questions and commentsSave the RB-1581 shipping carton and all enclosed packing material for future use. Shipping or moving the RB-1581 in anything other than the original packing material may result in severe damage to your amplifier.If included in the box please fill out and send in the owner`s registration card. Also be sure to keep the original sales receipt. It is your best record of the date of purchase, which you will need in the event warranty service is ever required.PlacementLike all audio components that handle low-level signals, the RB-1581 can be affected by its environment. Avoid placing the RB-1581 on top of other components. Also avoid routing audio signal cables near power cords. This will minimize the chance it will pick up hum or interference.The RB-1581 generates heat as part of its normal operation. The heat sinks and ventilation openings in the amplifier are designed to dissipate this heat. The ventilation slots in the top cover must be open. There should be 10 cm (4 inches) of clearance around the chassis, and reasonable airflow through the installation location, to prevent the amplifier from overheating.Remember the weight of the amplifier when you select an installation location. Make sure that the shelf or cabinet can support it. We recommend installing the RB-1581 in furniture designed to house audio components. Such furniture is designed to reduce or suppress vibration which can adversely affect sound quality. Ask your authorized Rotel dealer for advice about component furniture and proper installation of audio components.AC Power and ControlAC Power Input 8Your RB-1581 is configured at the factory for the proper AC line voltage in the country where you purchased it (USA: 120 volts/60 Hz, Europe: 230 volts/50 Hz). The AC line configuration is noted on a label on the back panel.NOTE: Should you move your unit to another country, it may be possible to reconfigure it for use on a different line voltage. Do not attempt to perform this conversion yourself. Opening the enclosure of the unit exposes you to dangerous voltages. Consult a qualified service person or the Rotel factory service department for information.NOTE: Some products are intended for sale in more than one country and as such are supplied with more than one AC cord. Please use only the cord appropriate for your country/region.Because of its relatively high power rating, the RB-1581 can draw considerable current. Therefore, it should be plugged directly into a 3-pin polarized wall outlet. Do not use an extension cord. A heavy duty multi-tap power outlet strip may be used if it (and the wall outlet) is rated to handle the current demanded by the RB-1581 and all the other components connected to it.Be sure the power switch on the front panel of the RB-1581 is turned off (in the …out… position). Then, connect the supplied power cord to the Power Connector 8 on the rear of the unit and the AC power outlet.If you are going to be away from home for an extended period of time such as a month-long vacation, it is a sensible precaution to unplug the RB-1581 (as well as other audio and video components) while you are away.Power Switch and Power Indicator 1Press the front panel Power Switch button, to turn the unit on (or to activate the 12V trigger). The Power Indicator light is illuminated when the unit is on. Press the Power Switch button again to turn the unit off.Protection Indicator 2The RB-1581 features thermal and over-current protection circuits that protect against potential damage in the event of extreme or faulty operating conditions. Unlike many designs, the RB-1581Ês protection circuit is independent of the audio signal and has no impact on sonic performance. Instead, the protection circuit monitors the temperature of the output devices and shuts down the amplifier if temperatures exceed safe limits.Most likely, you will never see this protection circuitry in action. However, should a faulty condition arise, the amplifier will stop playing and the PROTECTION LED on the front panel will light.If this happens, turn the amplifier off, let it cool down for several minutes, and attempt to identify and correct the problem. When you turn the amplifier back on, the protection circuit will automatically reset and the PROTECTION LED should go out.In most cases, the protection circuitry activates because of a fault condition such as shorted speaker wires, or inadequate ventilation causing an overheating condition. In very rare cases, highly reactive or extremely low impedance speaker loads could cause the protection circuit to engage.If the protection circuitry triggers repeatedly and you are unable to isolate and correct the faulty condition, contact your authorized Rotel dealer for assistance in troubleshooting.Trigger On/Off Mode Selector 5The amplifier provides the option for manual or automatic power on/off operation. These modes are selectable using a toggle switch on the back panel.With the switch in the +12V TRIGGER ON position, the amplifier is turned on automatically when a 12V trigger signal is present at the 3.5 mm Jack of TRIGGER IN on the rear panel. The amplifier will go into standby mode if the +12V signal is not present. The front panel POWER SWITCH overrides this function. It must be ON for the +12V trigger to work. Turning the switch OFF cuts power to the amplifier, regardless of whether or not a trigger signal is present.12V Trigger Input and Output 4The jack labeled IN is for connecting the 3.5mm Plug/Cable carrying a +12 volt trigger signal to turn the amplifier on and off. To use this feature the toggle switch must be set to the ON position. This input accepts any control signal (AC or DC) ranging from 3 volts to 30 volts.The jack labeled OUT is for connecting another 3.5mm plug/cable to provide a 12V trigger signal to other components. The 12V output signal is available whenever a +12 volt trigger signal is applied to the IN connector.Input Signal Connections 3See figure 2NOTE: To prevent loud noises that neither you nor your speakers will appreciate, make sure the system is turned off when you make any signal connections.The RB-1581 provides two types of input connections · unbalanced RCA type connections as found on nearly all audio equipment as well as balanced XLR connections.Select high quality audio interconnect cables. Connect each of the outputs from the preamplifier or signal processor to the corresponding input of the amplifier.Input Selector SwitchA toggle switch in the rear panel selects the type of input signal to use. Select the correct inputs to use with this flip switch.NOTE:You should choose only one method of analog connection from a source component to RB-1581. Do not connect both the RCA and XLR outputs of a source component to the RB-1581 at the same time. Speaker OutputsSee Figure 2Speaker SelectionThe nominal impedance of the loudspeaker(s) connected to the RB-1581 should be a minimum of 4 ohms. When driving multiple pairs of speakers connected in parallel, the effective impedance the amplifier sees is cut in half. For example, when driving two pair of 8 ohm speakers, the amplifier sees a 4 ohm load. When driving multiple speakers in parallel, select speakers with a nominal impedance of 8 ohms or higher.Speaker Wire SelectionUse insulated two-conductor stranded wire to connect the RB-1581 to the speakers. The size and quality of the wire can have an audible effect on the performance of the system. Standard speaker wire will work, but can result in lower output or diminished bass response, particularly over longer distances. In general, heavier wire will improve the sound. For best performance, you may want to consider special high-quality speaker cables. Your authorized Rotel dealer can help in the selection of cables for your system.Polarity and PhasingThe polarity --- the positive/negative orientation of the connections --- for every speaker and amplifier connection must be consistent so all the speakers will be in phase. If the polarity of one connection is mistakenly reversed, bass output will be very weak and stereo imaging degraded. All wire is marked so you can identify the two conductors. There may be ribs or a stripe on the insulation of one conductor. The wire may have clear insulation with different color conductors (copper and silver). There may be polarity indications printed on the insulation. Identify the positive and negative conductors and be consistent with every speaker and amplifier connection.Speaker Connection 6See Figure 2Turn off all the components in the system before connecting the speakers. The RB-1581 has two pairs of color-coded binding posts on the back panel. These connectors accept bare wire, connector lugs, or dual banana type connectors (except in European Community countries where their use is not permitted).Route the wires from the RB-1581 to the speakers. Give yourself enough slack so you can move the components to allow access to the speaker connectors.If you are using dual banana plugs, connect them to the wires and then plug into the backs of the binding posts. The binding posts should be screwed in all the way (clockwise).If you are using terminal lugs, connect them to the wires. If you are attaching bare wires directly to the binding posts, separate the wire conductors and strip back the insulation from the end of each conductor. Be careful not to cut into the wire strands. Unscrew (turn counterclockwise) the binding post. Place the connector lug or wire around the binding post shaft. Turn the binding post clockwise to clamp the connector lug or wire firmly in place.NOTE: Be sure there are no loose wire strands that could touch adjacent wires or connectors.TroubleshootingMost difficulties in audio systems are the result of poor or wrong connections, or improper control settings. If you encounter problems, isolate the area of the difficulty, check the control settings, determine the cause of the fault and make the necessary changes. If you are unable to get sound from the RB-1581, refer to the suggestions for the following conditions:Power Indicator Is Not IlluminatedNo main power to the RB-1581. Check AC power connections at the amplifier and the AC outlet. Check the front panel power switch. Make sure that it is set to the ON position.Fuse Replacement 7If everything checks out correctly and you still cannot get the amplifier to turn on, check for a blown fuse. Disconnect the AC from the wall and remove the fuse holder 7 on the back panel. If the fuse is blown, replace with a new fuse and try again.Note: Make sure that the power cord is disconnected from the wall before checking or replacing the fuse. Replace only with the identical size and type fuse (3AG 125V 12A for U.S. version or 5ST6.3 for European version). No SoundIf the amp is getting AC power, but is producing no sound, check the PROTECTION INDICATOR on the front panel. If lit, see below. If not, check all of your connections and control settings on associated components. Protection Indicator Is IlluminatedThe front panel PROTECTION INDICATOR lights when the RB-1581protection circuits have shut off the amplifier. Typically, this occurs only when the ventilation openings are blocked, when there is faulty speaker wiring, or after a period of extreme use. Turn off the system and wait for the amp to cool. Then push the front panel power switch in and out to reset the protection devices. If the problem is not corrected or reoccurs, there is a problem with the system or the amplifier itself.SpecificationsContinuous Power Output 500 watts(20-20k Hz, <0.09%, 8 ohms)Total Harmonic DistortionTotal Harmonic Distortion (20Hz - 20kHz, 8 ohms) <0.03% Intermodulation DistortionIntermodulation Distortion (60Hz:7kHz, 4:1) <0.03% Damping FactorDamping Factor (20Hz-20kHz, 8ohms) 800Input Impedance/SensitivityUnbalanced 12k ohms/ 1.6 volts Balanced 100k ohms/ 2.5 volts Amplifier GainAmplifier GainUnbalanced 32dBBalanced 28 dBFrequency Response (μ1db)10 Hz - 100k Hz Speaker ImpedanceSpeaker Impedance 4 ohms minimum Power RequirementsUSA: 120 volts, 60 HzEurope: 230 volts, 50 Hz Power ConsumptionPower Consumption 550 watts Dimensions (W x H x D)431 x 144 x 407 mm17x57/8 x 16ins Front Panel HeightFront Panel Height 3U/132.6mm/5 1/4ins Weight (net)17.1 kgs, 37.62 lbsAll specifications are accurate at the time of printing.Rotel reserves the right to make improvements without notice.Rotel and the Rotel HiFi logo are registered trademarks of The Rotel Co., Ltd.,T okyo, Japan.警告：机内无客户可以维修的部件。

Amplification›Channels: 7›Amplification Type: Direct Energy›170 W/ch (6 ohms, 1 kHz, THD 0.9 %, 1ch Driven FTC)›100 W/ch (8 ohms, 20 Hz-20 kHz, THD 0.08 %, 2ch Driven FTC) Audio Features›Dolby Atmos/Dolby Surround›DTS:X*1/DTS Neural:X*1›Dolby® TrueHD/Dolby Digital Plus›DTS-HD Master Audio/DTS-HD High Resolution Audio/DTS 96/24/DTS-ES/ DTS-HD Express›DSD Playback via Network/USB (5.6 MHz/2ch 2.8 MHz/2ch)›DSD Disc (SACD) Playback via HDMI (2.8 MHz/5.1ch, 2ch)›Digital Core Engine with Cirrus Logic (Quad Core) x1›384 kHz/32-bit DAC (AK4458)›HDMI Audio Return Channel (ARC)›MCACC Auto Room Tuning (Microphone included)• Phase Control (Compensates the delayed bass to improvesound synchronization)• Subwoofer EQ (4 Band)• Reflex Optimizer (Layers MCACC for more accuratemeasurement when using Dolby-enabled speakers)›Advanced Sound Retriever (2ch)›Advanced Surround Modes• Classical, Unplugged, Entertainment Show, Drama, AdvancedGame, Action, Rock/Pop, Sports, Extended Stereo, Extended Mono,Front Stage Surround, Auto SurroundVideo Features›Ultra HD Pass-through with HDCP 2.2 (4K/60p/4:4:4/24-bit,4K/24p/4:4:4/36-bit, 4K/60p/4:2:0/36-bit)›HDR and BT.2020 Support›Ultra HD Upscaling (1080p 4K)›3D Ready (Blu-ray Disc™, Broadcast, and Games)›Deep Color (36-bit), “x.v.Color”Home Network Features›Google Cast*1*2›Apple® AirPlay® Certified›Pandora®*3›Spotify® Digital Music-Streaming Service Ready*4›Internet radio with TuneIn®›TIDAL Music Streaming Service Ready*1›DEEZER*1*5›FireConnect powered by Blackfire Research*1*6 (Wireless protocol that mirrors audio sources connected to FireConnect enabled receivers with future firmware update)›Hi-Res Audio File Playback via USB/Wired Network• Up to 192 kHz/24-bit ALAC, AIFF, FLAC, WAV• 5.6/2.8 MHz DSD Playback• Dolby® TrueHD Playback (USB only)Convenience Features›Built-in Wi-Fi® (Dual Band 5 GHz/2.4 GHz)›Built-in Bluetooth® Wireless Technology (Version: 4.1, Profile: A2DP/AVRCP, Codec: SBC/AAC)›iControlAV5 Remote Control App Ready (iOS/Android™)*7›New GUI with System/Network Setup Menu›Auto Power Off in HDMI Standby Through›AM/FM Tuner 40 Presets›Sleep Timer›New User-Friendly Simple Remote ControlThe VSX-1131 is fully-equipped for the latest multi-dimensional surround sound formats, DTS:X® Ready*1 and Dolby Atmos®, featuring the Reflex Optimizer for Dolby-enabled speakers. With Ultra HD (4K/60p/4:4:4) upscaling and pass-through and support for the latest video standards HDR and BT.2020, images are ever more impressive. In addition to internet radio and various network streaming services, with Google Cast™*1*2 built-in you can use your mobile device to cast your favorite music to your receiver.*1 Available with future firmware update *2 Compatible apps required *3 Service only available in the U.S., Australia, and New Zealand*4 For service availability in your country, check *5 Service available in Canada, not available in the U.S. *6Optional future FireConnect compatible Speaker required*7Available for free download from the App Store™/Google Play™Integrated TechnologiesFront Terminals›HDMI 1 In›USB 1 In for USB Drive ›MCACC Setup MIC In›Audio 1 In (Mini Stereo Jack)›Phones 1 OutRear Terminals›HDMI 6 In (4 Assignable)›HDMI 2 Out (1 for MAIN, 1 for SUB) ›Ethernet 1 In›AV (Component) 1 In (Assignable) ›AV (Composite) 2 In (Assignable) ›Audio 1 In (Assignable) ›Phono (MM) 1 In›Digital Coaxial 1 In (Assignable) ›Digital Optical 2 In (Assignable)›Subwoofer 2 Pre Out›Zone 2 Line Out›Speaker 9 ch Out (FRONT, CENTER, SURROUND, SURROUND BACK/ZONE 2/ Bi-AMP, HEIGHT/SP B) ›FM/AM AntennaSpecifications›Power Requirements: AC 120 V, 60 Hz›Power Consumption/Standby: 580 W/0.1 W ›Dimensions (W x H x D): 17-1/8 x 6-13/16 x 14-9/16 inches (435 x 173 x 370.5 mm) ›Weight: 22 lbs. (10 kg)UPC›889951000075© 2016 Onkyo & Pioneer Corporation. All rights reserved.Note: Specifications and design subject to change without notice.• “PIONEER”, “MCACC”, “Phase Control” and “Advanced Sound Retriever” are trademarks of Pioneer Corporation, and are used under license. •The terms HDMI and HDMI High-Definition Multimedia Inter-face, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. •Dolby, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories. • For DTS patents, see . Manufactured under license from DTS, Inc. DTS, the Symbol, DTS in combination with the Symbol, DTS:X, and the DTS:X logo are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved. •“Made for iPod”, “Made for iPhone” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. •AirPlay works with iPhone, iPad, and iPod touch with iOS 4.3.3 or later, Mac with OS X Mountain Lion, and Mac and PC with iTunes 10.2.2 or later. The AirPlay logo is a trademark of Apple Inc. App Store is a service mark of Apple Inc. •iOS is a trademark on which Cisco holds the trademark right in the US and certain other countries. •Wi-Fi is a registered trademark of the Wi-Fi Alliance. The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. •The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. •”x.v.Color” is a trademark of Sony Corporation. •Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc. used with permission. •Spotify and the Spotify logo are trademarks of the Spotify Group, registered in the U.S. and other countries. • FireConnect is a technology of Blackfire Research Corp, USA. •The product with the Hi-Res Audio logo is conformed to Hi-Res Audio standard defined by Japan Audio Society. The logo is used under license from Japan Audio Society. •Android, Google Play, Google Cast and the Google Cast badge are trademarks of Google Inc. •Blu-ray Disc™, Blu-ray™, Ultra HD Blu-ray™ and the logos are trademarks of theBlu-ray Disc Association.All other trademarks and registered trademarks are the property of their respective holders.。

功放使用说明书该说明书为东莞市奇声电子实业有限公司版权所有目录一.面板按键功能说明---------------------------------- 1二.功能特性 ------------------------------------------3 三．设置--------------------------------------------- 2 四．播放----------------------------------------------3 五．连接----------------------------------------------3六. 配置----------------------------------------------4七. 附录----------------------------------------------5八.使用注意事项---------------------------------------5一.面板按键功能说明1102-U二：功能特性尺寸：420×138×340mm输出水平/阻抗：前级输出：2.2V/2.2K 欧姆低音输出：2.2V/2.2K 欧姆录音输出：300mV/2.2K 欧姆音乐输出：2.2V/2.2K 欧姆功率输出：120W/8欧-180W/4欧输入灵敏度/阻抗：4欧姆-8欧姆总谐波失真率：1KHz, 8欧姆DVD, TAPE, AUX 300 mV /47K 欧姆BGM 300 mV /47K 欧姆传声器： 6mV/3.3K 欧姆频率响应：Mic：20-20KHz, 3dBMusic： 20-20KHz, 3dB供应电压：220v-50Hz欢迎您的下载，资料仅供参考！致力为企业和个人提供合同协议，策划案计划书，学习资料等等打造全网一站式需求。

ST5812H系列产品操作说明书深圳市腾远智拓电子有限公司目录一、设备安装与连线 (3)1.1.接口说明 (3)1.2.设备供电连线 (3)1.3.天线校对示意图 (4)二、设备调试 (4)2.1.设备调试准备 (4)2.2.设备登陆 (5)2.3.无线网桥模式配置 (6)2.3.1.接收端（中心站）配置 (6)2.3.2.发射端（远端站）配置 (7)2.4.网络管理 (7)2.5.用户管理 (8)2.6.系统管理 (9)三、使用注意事项 (10)四、常见故障及排查 (11)4.1.图像（数据）突然丢失，中断 (11)4.2.图像（数据）卡顿，丢包 (11)4.3.网页参数显示不全 (11)一、设备安装与连线1.1. 接口说明1.2. 设备供电连线设备通过POE用网线供电，为了设备的正常工作，请使用直通网线将设备连接到POE供电盒的POE接口，LAN口连接网络摄像机或者其他网络信号：注意：网线应该选用超5类或者超6网线，从POE连接网桥的那段网线不能超过25米，否则不能设备有可能供电不足，LAN口网线最好不要超过90米。

设备运用时注意保持电源稳定，如果频繁断电的话，容易造成设备恢复出厂设置。

1.3. 天线校对示意图设备安装固定时候，设备的天线要互相面向对方，以保证最佳传输效果，如下图所示：二、设备调试2.1. 设备调试准备配置前需将计算机（PC）的区域联机IP地址改到192.168.1.X，且IP地址不冲突，(如：192.168.1.100，子网掩码：255.255.255.0)；注：建议使用Chrome/Edge/Firefox浏览器进行参数配置，使用IE或其他IE内核的浏览器设备参数显示可能出现缺失；特别提醒：PC与无线设备的网络IP地址网段需相同，方可进行参数配置；2.2. 设备登陆打开浏览器，输入无线设备IP地址http://192.168.1.20,输入设备用户名与密码，点击“登陆”进入系统；设备默认IP地址：192.168.1.20，默认密码:admin。

1、概述YE5872/5873功率放大器是用来推动激振器，作为振动试验和振动测量的大功率激振源。

可以广泛地应用于航空、航天、机械、建筑和交通部门的振动研究和振动实验。

本仪器具有以下特点：△电路由晶体管和集成运算放大器组成△可调节的3A至15A/35A输出电流限制保护△输出晶体管、散热器温度保护△输出晶体管失效指示△输出信号削波指示△低阻输出高阻输出两种工作方法。

2、技术指示2.1最大输出功率：210VA/500VA2.2最大输出电压：14Vrms/16Vrms2.3最大输出电流：10Arms/25Arms;5HZ15 Arms 20Hz-10kHz/35Arms 20Hz-10kHz2.4频率范围：满功率 20Hz-10kHz降额功率 DC-50kHz（减半）2.5频率响应：（低阻抗模式，输出3V时的小信号特性）直流输入 DC-15kHz ±0.5dBDC-100kHz ±3.0dB交流输入 20Hz-50kHz ±1.0dB2.6 增益（1KHz）：低阻抗5V/V ±2dB高阻抗8A/V ±2dB2.7 输入阻抗： >10KΩ2.8 非线性失真：<1%，5Hz -10kHz（低阻抗）2.9 信比：低阻抗≥80dB高阻抗≤60dB2.10 供电电源：220V+5%；220V-10%；50Hz2.11 体积：166×440×3202.12 重量：约15Kg3、工作原理本机功放电路由差动前置放大级、推动级和全对称互补功率输出级组成，输入信号经过一个场效应晶体管门电路进入功率放大器，功率放大器的输出驱动激振器负载。

本机保护包含功率放大器和与之相配接的激振器，设置有可调驱动电流极限保护，预调的电流限制范围可在3A-15A/35A之间分档调整，当保护电路被触发时，截断输入信号。

在高的环境温度或者异常载荷情况下都将导致输出晶体管的温度超过设计限制，结果使晶体管损坏，为了防止这种情况，温度保护电路在温度过高时会阻断放大器的输入信号。

Class-D Professional Amplifiers目录表重要安全事项和符号说明 (3)前言 (4)前板功能介绍 (5)后板功能介绍 (6)系统连接实例 (7)功放安装配电配线 (8)功放散热条件 (9)功放使用电平的调整 (10)技术指标 (11)故障排除 (12)产品物质拆分表 (13)1601 Jack Mckay Blvd, Ennis, Texas 75119, USA重要安全事项和符号说明1.阅读这些规定。

2.保存好这本使用手册。

3.注意所有警告。

4.遵守这些规定。

5.可使用软布及风枪进行清洁。

6.要注意不要形成热风循环。

按建议方法进行安装。

7.不要安装在热源附近，尽可能保证环境气温在35°C以下使用。

8.确保接地良好，不建议浮地使用。

9.保护电线防止被踩踏或挤压，尤其要注意插头、电源插座及其连接设备处。

10.必须按照以下开关次序来使用该产品：前级-功放（开）、功放（关）-前级。

12.若输入信号并接超过三台功放，建议使用信号分配器，以确保输入信号不至失真。

13. 不要将功放的某一个声道的输出接口接到另一个通道的输入接口。

不要将功放的输出并联或串联到另一台功放的输出接口来使用。

14.50%-100%,设计系统配置功放的时候，功放的功率应比音箱在相同阻抗的标称功率大应小心使用桥接模式。

11.通电前必须确保供电电压符合该设备的要求。

15.在维修功放的时候，禁止在桥接状态下将示波器的探头连接到功放的输出端，以免损坏功放和示波器。

16.建议：1)由于输出到音箱的电流较大，建议使用质量有保证的NL4型音箱螺旋插头。

2)多台功放使用时应计算好合适的配电，以确保达到合格的使用环境。

提醒用户本手册中有重要的信息。

小心触电，非拥有相关资质的人员请勿擅自开盖维修。

31601 Jack Mckay Blvd, Ennis, Texas 75119, USA Telephone: 800.876.3333 • Fax: 800.765.3435Class-D Professional Amplifiers前言欢迎拆包请在拆开包装后，确认功放的外观没有在运输途中遭到损坏。

使用说明书Sigma 系列AMP2 双声道功率放大器Classé公司的所有工作人员全心全意地制作，确保为你提供极具价值的购买选择。

我们很自豪的告诉您，所有Classé部件均通过欧洲共同体（CE）标志的官方认可。

这也就是说，你所购买的Classé产品经过了世界上最为严格的生产和安全测试。

CE的标志证明你所购买的产品符合、甚至超过欧洲共同体对产品的一致性和消费者安全的所有的要求。

本设备经测试及符合FCC规则第15部份B类数字式设备极限。

操作本装置应符合以下两个条件：（1）本装置不得产生有害的干扰；及（2）本装置一定会接受任何受到的干扰，包括可能导致意外操作的干扰。

这些限制旨在为居家安装环境中针对有害的干扰提供合理的保护。

本设备会产生、使用及发射射频能量，如果未依照指示安装及使用，将会导致对无线电通讯产生有害干扰。

但是，我们不保证在某种安装方法之下不会产生干扰。

如果本设备的确对广播或电视接收造成干扰（这些干扰可通过开启和关闭设备确定），我们鼓励用户尝试通过以下一种或多种方法防止产生干扰：• 调整接收天线的方向或位置；• 增加设备和接收天线之间的距离；• 将设备和接收器连接到不同电路的插座上；• 向经销商或有经验的广播/电视技术人员寻求帮助。

注意：未经制造商批准而对本设备进行变动或更改可能使用户无法操作设备。

本手册如有更改，恕不另行通知。

本手册的最新版本将在本公司网站上发布。

Classé产品上的CE标志表示本产品符合欧洲共同体的 EMC（电磁兼容性）和LVD（低电压指令）的标准。

Classé符合欧洲议会和理事会有关废电机电子设备（WEEE）的指令2002/96/EC。

本产品必须根据这些指令予以妥善回收或处理。

请咨询当地废物处理机构获得指引。

Classé产品的设计与制造符合欧洲议会与委员会指令2002/95/EC中限制使用有害物质（RoHS）的规定。

篇一：功放说明书说明书一、面板布置：1、本功放由功放、播放器、电平指示器、扬声器四个模块组成。

其中功放有放大音频信号的功能，可把播放器音频、外接音频、话筒音频信号放大，通过调节旋钮可改变信号的大小。

播放器有读取内存卡里的音频文件并转化成音频信号（另有收音机功能）的功能。

电平指示模块是通过计算音频信号，获取音频里音调的高低信号，再通过led灯显示出来，具有装饰的功能。

扬声器是把音频信号转化成声音信号的作用。

2、正前方：电平指示 1314⑥⑦⑧⑨⑩ 11 12①②③④⑤左声道右声道①电源指示灯、②音频输入、③音量旋钮、④话筒音量旋钮、⑤话筒输入、⑥播放器电源开关、⑦上一曲/音量-、⑧播放/暂停、⑨下一曲/音量+、⑩播放模式、11数据线插孔、12 usb 插孔、13播放器显示屏、14 sd卡插孔（注：11、12、14插孔都是输入插孔，不能输出）3、正后方：变压器变压器线散热器遥控器电源线耳机插孔扬声器插头注意：1、使用前检查电源线和变压器线是否完好，外层绝缘皮是否有破损，若有破损则需要用电胶布粘住，防止皮肤接触而触电。

2、通电时最好不要触碰变压器和变压线。

3、使用时禁止触碰散热器、变压器，防止因温度过高而烫伤。

4、当使用耳机听音频时，只需把耳机插入耳机插孔，但要注意，在使用耳机之前要控制好音量，防止音量过大而损坏耳机。

一般操作是先把音量调为最小，插入耳机后再慢慢增大。

二、使用步骤：1、打开电源：在打开电源前先把音乐音量，话筒音量④调为最小，并确定自带播放器开关⑥处于关闭状态。

然后把电源线接电，则电源指示灯会亮①。

2、接音频：音频有两种，一种是外接音频输入②，另外一种是自带播放器输入，其优先级是外接音频输入高于自带播放器音频输入。

（1）外接音频输入需用一根3.5mm音频线与外界播放器连接，另外一端必须接到功放的外接“音频输入”②插孔，注意播放器的音量③应适当,否则将会烧坏功放芯片和损坏喇叭。

（2）自带播放器输入：首先把优盘或sd卡插入相应位置11、12、13，然后把播放器开关打开⑥，启动自带播放器。

一般规格放大器部分额定输出功率 (IEC)7 ch × 130 W （6 Ω, 1 kHz ），1 声道驱动，1% THD 最大有效输出功率 (JEITA)7 ch × 160 W （6 Ω, 1 kHz ），1 声道驱动，10% THD 动态功率 (＊)＊IEC60268 短期最大输出功率160 W （3 Ω，正面）125 W （4 Ω，正面）85 W （8 Ω，正面）THD+N （总谐波失真率+噪声）0.08%（20 Hz­20,000 kHz ，半功率）输入灵敏度和阻抗 (1 kHz 100 W/8 Ω)200 mV/47 kΩ（LINE(不平衡)）3.5 mV/47 kΩ (PHONO MM)额定RCA 输出电平和阻抗1 V/470 Ω (SUBWOOFER PRE OUT)200 mV/2.3 kΩ (ZONE LINE OUT)唱机超载70 mV (MM 1 kHz 0.5%)频率响应10 Hz ­ 100 kHz/+1 dB,–3 dB (Direct/Pure Audio)音调控制特性±10 dB, 90 Hz （BASS ）±10 dB, 7.5 kHz （TREBLE ）信噪比106 dB （IHF­A ，LINE IN ，SP OUT ）80 dB （IHF­A ，PHONO IN ，SP OUT ）扬声器阻抗6 Ω ­ 16 Ω耳机输出阻抗330 Ω耳机额定输出85 mW （32 Ω，1 kHz ，10% THD ）视频部分信号电平1 Vp­p/75Ω（复合视频）1 Vp­p/75Ω（分量视频 Y）规格0.7 Vp­p/75Ω（分量视频 B/R）色差分量视频支持的最大分辨率480i/576i调谐器部分FM调频范围87.5 MHz ­ 108.0 MHz，RDSAM调频范围522/530 kHz ­ 1611/1710 kHz预设频道40网络部分以太网LAN10BASE­T/100BASE­TX无线LANIEEE 802.11 a/b/g/n 标准（Wi­Fi® 标准）5 GHz/2.4 GHz 波段BLUETOOTH部分通讯系统BLUETOOTH 规格版本4.1+LE频段2.4 GHz 波段调制方法FHSS（Freq Hopping Spread Spectrum）可兼容的BLUETOOTH规范A2DP 1.2AVRCP 1.3HOGP 主机（客户机）HOGP­HID 设备（服务器）HID 服务 (HIDS)支持的编解码器SBCAAC传输范围(A2DP)20 Hz ­ 20 kHz（采样频率 44.1 kHz）最大通讯范围视距约 15 米 (＊)＊实际范围取决于多种因素，比如设备之间的障碍、微波炉周围的磁场、静电、无绳电话、接收灵敏度、天线的性能、操作系统和软件应用程序等。

ProductFolderOrderNowTechnicalDocumentsTools &SoftwareSupport &CommunityTAS5760MDZHCSBC4D–MAY2013–REVISED MAY2017 TAS5760MD通用I2S输入D类放大器（具有DirectPath™耳机和线路驱动器）1特性•音频I/O配置：–单路立体声I²S输入–立体声桥接负载(BTL)或单声道并行桥接负载(PBTL)运行–32kHz、44.1kHz、48kHz、88.2kHz、96kHz采样速率–耳机放大器/线路驱动器•常规运行特性：–可选硬件或软件控制–集成数字输出削波器–可编程I²C地址（1101100[R/W]或1101101[R/W]）–闭环放大器架构–可调节扬声器放大器开关频率•稳定性特性：–时钟误差、直流和短路保护–过热保护和可编程过流保护•音频性能（PVDD=19V，R SPK=8Ω，SPK_GAIN[1:0]引脚=01）”–闲置通道噪声=<80µVrms（输入信噪比）–THD+N=0.03%（功率为1W，频率为1kHz）–SNR=100dB A-Wtd（以THD+N=1%为基准）2应用•LCD/LED TV和多用途监视器•条形音箱，扩展坞，PC音频•通用音频设备3说明TAS5760MD是一款立体声I2S输入器件，具有硬件和软件(I²C)控制模式、集成数字削波器、多种增益选项并且电源运行电压范围较大，支持其适用于多种应用非常有用。

TAS5760MD运行电压范围为4.5V至24VDC的标称电源电压。

该器件配有集成DirectPath™耳机放大器和线路驱动器，可提高系统级集成度并降低解决方案总成本。

输出金属氧化物半导体场效应晶体管(MOSFET)的120mΩDS(ON)兼顾散热性能与器件成本，二者相得益彰。

此外，该器件采用耐热增强型48-Pin TSSOP封装，在现代消费类电子器件的较高工作环境温度下展现出优异的性能。

使用说明书专业功率放大器User’s Manual目录2345768故障现象目录1注意事项格的AC 电源插座。

否则可能会导致火灾或触电。

电。

液体或细小金属物品落入本装置内可能会导致火灾或触电。

电源线，进而导致火灾或触电。

特别注意，切勿将重物压在被地毯覆盖的电源线上。

勿划伤、弯折、扭曲、拉伸或加热电源线。

否则可能会损伤电源线，进而导致火灾或触电。

勿打开本装置罩壳。

否则可能导致触电。

如果认为内部需要检修、维护保养或修理，请与代理经销商联系。

—暴露在飞溅的油沫、蒸汽之下，如靠近厨灶、增湿器等地方。

—不稳定的表面，如摇晃的桌面或斜面。

—暴露在过热环境下，如窗户紧闭的车内或受阳光直射的地方。

—暴露在高潮湿的环境下或灰尘积聚的地方。

灾或触电。

AC 电源插座拔出电源插头时请抓住插头部分。

切勿直接拽拉缆线。

否则可能会损伤电源线，进而导致火灾或触电。

装置在正面和背面都有通风孔，以避免内部温度升得过高。

请勿阻塞这些通风孔。

阻塞通风孔可能会导致火灾。

特别注意，切勿—将本装置侧放或倒放，—将本装置放在通风不良的地方，如书橱或壁橱（而不是安装在附带的专用支架上），用桌布覆盖本装置，或将它放在地毯以及床上。

请勿擅自改造本装置。

否则可能会导致火灾或触电。

如果出现闪电雷击，请尽快关闭本装置电源开关，并从电源插座拔出电源电缆的插头。

如果可能出现闪电，在接插状态请勿触碰电源电缆的插头，否则可能导致触电。

若电源线损坏（如切断或芯线裸露），请从代理经销商获取更换品。

用损伤的电源线继续使用本装置可能会导致火灾或触电。

若本装置从高处跌落或外壳损坏，请立即关闭电源开关，从A C 电源插座拔出电源插头，并与代理经销商联系。

若忽视本条注意事项继续使用，可能会导致火灾或触电。

当发现任何异常时，如冒烟、异味、噪音或有异物、液体进入装置内部，请立即关闭电源开关。

并将电源线插头从A C 电源插座中拔出。

请代理经销商代为修理。

这时若继续使用可能会导致火灾或触电。

野外型双向放大器LHF780/880E使用说明书M04140100-00SS版本号：3.30拟制：邓发军20040623复核：张书源20040623批准：倪俊德20040623一、用途本系列双向干线放大器，特别适用于HFC双向干线网络。

着重解决了电磁兼容(EMC)及上下行信号的高隔离度问题，选用特制净化开关电源、高隔离度高屏蔽双向滤波器及进口上下行模块，确保本系列放大器在交互式网络中有优良的性能。

本系列放大器可选择配置网管应答器，具有对输出电平、工作电压及工作电流等物理参数的实时监测，并对反传通道的噪声进行控制等功能，使维护更加方便，大大提高网络运行的可靠性。

二、特点●采用进口或国产正、反向放大模块，技术指标优良。

●桥接输出时提供3路高电平输出（1路主输出口，2路桥接输出口，桥接口电平比主输出口低（4dB）；分配输出时提供2路等电平输出口；分支输出时提供1路比主口低12dB的分支输出口。

●提供独立的专用供电口，其余每个端口也可进行电缆供电。

●高效开关电源，电磁兼容特性好，电源电压及环境温度适应范围宽。

●预留双向和网管功能。

强大的网管功能，配合前端管理软件，可以远程调节、控制各反传通道增益，并对工作电压、整机电流及输出电平等参数进行监测。

●正、反向通道采用固定均衡及固定衰减（可通过改变固定均衡及衰减部分的衰减插片，实现对均衡量及衰减量的调节），既保证整机性能指标和可靠性，又方便工程使用。

●采用防雨铸铝外壳，防雨、屏蔽特性好，适用于野外使用。

三、技术参数（一）、放大器部分注：1、正向传输下限频率和反向传输上限频率可由用户选择。

2、可根据用户要求，提供大于106dBuV以上的输出电平。

3、三信号法测试结果，f1=65MHz，f2=63MHz、f3=57MHz测量时输出电平为110dBuV4、输入为79路（112.25MHz-743.25MHz）PAL-D模拟频道满负荷时，输出为标称输出电平下测试的指标。

AWA5870A型功率放大器使用说明AW A5870A型功率放大器是一种声学及振动测量专用双路输出功率放大器，由于采用名厂的大功率三极管，并精心配对，所以它具有输出功率大、放大倍数高、频响范围宽、失真小等优点。

可用于12面体声源、音箱及低频耦合腔的驱动等，可用于建筑声学测量、电声器件测量、声功率测量等。

可与各种信号源、计算机声卡输出口及其它音源配合。

它内部设计有多种保护线路，可以对输出负载短路、过热、过压等进行有效保护。

一、结构特征AW A5870A型功率放大器是一种双通道的功率放大器，它的面板采用对称设计，左右两边分为第一、二通道的输入、输出、幅度调节、电压指示，它的前面板如下图：面板示意图①电源开关：打开或关闭电源。

②电源指示灯：指示电源是否接通。

③信号输入插座：BNC座，用于输入信号。

④功率输出座：信号输出。

⑤电压表：指示输出信号的幅度。

⑥幅度调节电位器：调节输出信号的幅度。

⑦放大倍数波段开关：调节功率放大器的放大倍数。

二、主要技术指标输入阻抗：7.5kΩ最大输出电压：25V有效值最大放大倍数：100或500(用户定制)频率响应：20Hz~20kHz±0.5dB,1W/8Ω;2Hz~100kHz±3dB,1W/8Ω可接扬声器阻抗：4~16Ω输出阻抗：<0.8Ω失真度：<0.5% 50W/8Ω输出功率：100W×2 8Ω, 150W×2 4Ω输出通道数：2路共地。

最大信噪比：90dB(A计权)电源：220V/50Hz最大耗电量：500W外形尺寸：320mm*280mm*120mm质量：7kg接线示意图按上面的接线示意图将功率放大器与信号源及声源接好，将功率放大器上的放大倍数波段开关放在0dB档位，幅度调节电位器逆时针调到底，打开功率放大器的电源，10余秒后功率输出接通，顺时针调节电位器，提高输出电压，如果电位器顺时针调到底输出电压还不能达到要求时，可以顺时针转动波段开关到10dB档或更高，通过对电位器和波段开关的调节可以达到用户要求的输出幅度，注意电压表的指针尽量不要超过25V。

油研放大器说明书一、产品特点1.高保真音质：油研放大器采用先进的音频处理技术，能够提供高保真的音质，让用户享受到最真实的音乐体验。

2.强大的放大能力：油研放大器具有较高的功率输出，能够有效放大各种音频信号，以适应不同的使用场景。

3.多种输入接口：油研放大器提供多种输入接口，包括模拟输入、数字输入和无线输入等，方便用户连接各种音源设备。

4.简单易用的操作：油研放大器操作简单，配有直观的控制面板和远程遥控器，让用户可以轻松调节音量和音效等参数。

5.多种输出接口：油研放大器具有多种输出接口，可以连接到功放、音箱等设备，实现更大范围的声音覆盖。

二、操作方法1.连接音源设备：将音源设备通过合适的线缆连接到油研放大器的输入接口上。

2.打开电源：插好电源线后，按下电源开关按钮，油研放大器将开始工作。

3.调节音量：可通过旋钮或遥控器上的音量加减键来调节音量大小。

4.调节音效：油研放大器配备了多种音效选项，可根据个人喜好选择不同的音效模式。

5.连接输出设备：将油研放大器的输出接口连接到功放或音箱等输出设备上，以实现音频信号的放大和播放。

三、注意事项1.安装位置：为了确保油研放大器的正常工作和散热，应选择通风良好的位置，远离热源和湿气。

2.电源要求：在使用油研放大器时，请确保使用符合规定的电源电压和电流，避免因电压过高或过低而损坏设备。

3.防止过载：请避免将过高或过低的音频信号输入到油研放大器，以避免过载损坏设备。

4.定期清洁：定期清洁油研放大器的外壳和散热孔，以确保散热良好，延长设备寿命。

5.安全使用：在使用过程中，应注意防止触电，避免在湿手或有水的地方使用，以确保人身安全。

四、常见故障处理1.无法开机：检查电源线是否连接稳固，插头是否正常插入插座，确保电源正常供电。

2.无声音输出：检查音源设备是否正常连接，音量是否调节到合适位置，音源设备是否静音或音效设置不当。

3.杂音干扰：检查音源设备和油研放大器的线缆是否连接好，线缆是否损坏，确保连接正常。

1、概述YE5872/5873功率放大器是用来推动激振器，作为振动试验和振动测量的大功率激振源。

可以广泛地应用于航空、航天、机械、建筑和交通部门的振动研究和振动实验。

本仪器具有以下特点：△电路由晶体管和集成运算放大器组成△可调节的3A至15A/35A 输出电流限制保护△输出晶体管、散热器温度保护△输出晶体管失效指示△输出信号削波指示△低阻输出高阻输出两种工作方法。

2、技术指示 2.1 最大输出功率：210V A/500V A 2.2 最大输出电压：14Vrms/16Vrms 2.3 最大输出电流：10Arms/25Arms;5HZ 15 Arms 20Hz-10kHz/35Arms 20Hz-10kHz 2.4 频率范围：满功率20Hz-10kHz 降额功率DC-50kHz（减半） 2.5 频率响应：（低阻抗模式，输出3V时的小信号特性）直流输入DC-15kHz ±0.5dB DC-100kHz ±3.0dB 交流输入20Hz-50kHz ±1.0dB 2.6 增益（1KHz）：低阻抗5V/V ±2dB 高阻抗8A/V ±2dB 2.7 输入阻抗：>10KΩ 2.8 非线性失真：<1%，5Hz -10kHz（低阻抗）2.9 信比：低阻抗≥80dB 高阻抗≤60dB 2.10 供电电源：220V+5%；220V-10%；50Hz 2.11 体积：166×440×320 2.12 重量：约15Kg
GBT 14452-1993 金属弯曲力学性能试验方法。