JST41i产品规格书

安徽伟仪科技有限公司Anhui WEYII Science And Technology Co.,L TD.产品选型手册PRODUCT SELECTION GUIDE安徽伟仪科技有限公司Anhui WEYII Science And Technology Co.,L TD.地址（ADD）：安徽省合肥市高新区创新大道2700号电话（TEL）：400-997-0788 专注于气密检漏仪与气密检测设备专心 专注 专业专注于气密检漏仪与气密检测设备专心 专注 专业感谢以下品牌的长期支持与合作！安徽伟仪科技有限公司位于合肥市国家高新技术产业开发区，是一家专业从事气密检漏仪、气密检测设备、流体控制与气动技术领域的研发、生产与服务的高新技术企业。

Anhui Weiyi Technology Co., Ltd. is located in Hefei National High-tech Industrial Development Zone. Weiyi is a high-tech manufacturer specializing in R &D and service of air tightness detector, air tightness detection related equipment, fluid control and pneumatic technology.Since the establishment, We has always adhered to the management principle of talent oriented and core technology centered.Weiyi has gathered a large number of elites in the industry as technical backbones relying on the resources of China University of science and technology, Hefei University of Technolo-gy and other scientific research institutes. The advanced detection technology and design in China and abroad is combined with Weiyi's innovation also the requirement of customers. More professional solutions could provided based on this. We believe continuous improvement of product quality keeps its core competitiveness in the fierce market competition.We always strive for continuous innovation and excellence. We aim to win customers' trust with perfect products and high-quality services. We are concen-trating on being the first choice within international market.公司自成立以来，始终坚持以人才为本、核心技术为中心的经营原则，同时依托中科大、合工大及科研院所为资源，汇聚大量业内精英作为技术骨干，将国内外先进的检测技术、设计思路与伟仪的创新理念及用户的实际需求相结合，为客户提供更专业的解决方案，完善产品质量，使其在激烈的市场竞争中保持核心竞争力。

Features and Benefits • Fast and consistent fiber splicing for exceptional performance • NEW design features enhanced ease of use, maintenance, speed and shock resistance (see page 2)• Large capacity, internal battery charging system allows 200 splicing cycles (splicing/heating) in one charge 1Overview The powerful FITEL S179 Hand-Held, Core Alignment Fusion Splicer delivers fast and reliable optical fiber splicing even under harsh environmental conditions. Offering a wide range of capabilities, this fusion splicing machine opens the door to an entirely new range of applications. Product Description Designed with end users and rugged field use in mind, the FITEL S179 Fusion Splicer delivers rapid splicing and heating for consistent results, splice after splice. Suitable for use with ultra-bend insensitive and large area effective fibers, this fusion splicing machine is an excellent choice for a variety of deployments including data centers, Metro and FTTx.A broad range of new features that enhance communication, ease of use, portability and field durability combine to make the S179 Fusion Splicer one of the most powerful and user-friendly fusion splicing machines available today.1 In semi-auto splicing mode and regular heating mode • Wide splicing chamber for easy fiber loading • Lower profile, lighter weight design enhances portability • Powerful, high-propulsion motor (8N) for stable splicing • Compatible with Splice-On-Connectors (SOC)Applications• Fiber sensors• Manufacture of opticalcomponents• FTTx• LAN• Backbone• Enterprise• Long-haul• Data CentersAuthorized Distributor of FITEL Productsin the Americas ®2 | NEW FeaturesUnder Tough Environments2 IK07 rating Mechanical Impact means that the machine protects against 2 jour impact, it is equivalent to 500g force from 40cm. This rating does not guarantee that the machine will always be undamaged under these conditions.3 Standard operations could be carried out after conducting the above tests. These tests were performed at the Furukawa Electric Co., Ltd. laboratories with no significant damage resulting. This result does not guarantee that the machine will always be undamaged under these conditions.4 IPX2 rating drip proof means that the machine can be exposed to 3 mm/min drips for 10 minutes with 15 degree tilt and still function.5 IP5X rating dust proof means that the machine can be exposed to dust particles with a diameter of 0.1 µm to 25 µm and still function.• Shock Resistant: Equivalent to IK07 rating Mechanical impact2• Drop Resistant: 76 cm drop tests from 5 different angles3120 cm drop tests with hard carrying case3• Water Resistant: Equivalent to IPX2 rating drip proof4• Dust Resistant: Equivalent to IP5X rating dust proof5• Touch Screen: 4.3-inch wide LCD screen with touch panel for easy, intuitive operation• Illumination Lamp: 3 upper + 1 lower LED lights illuminate the entire splicing chamber• Detachable V-Groove: Easy maintenance and lens cleaning• Near Field Communication (NFC): Lock and unlock splicer via smartphone (only for Android phones, ver. 4.1 or later)• Wi-Fi Networking: Communication between splicer and smartphone• High Speed:6 seconds of splicing time and 9 seconds of heating timeDUST RESISTANT SHOCK RESISTANT WATER RESISTANTDROP RESISTANTNFC:LOCK AND UNLOCK ILLUMINATION LAMP:3+ 1 LED LIGHTSDETACHABLE V-GROOVEFOR EASY CLEANINGFITEL® S179 Fusion SplicerApplicable Fibers SM (ITU-T G.652, G.657A1 and G.657A2), MM (ITU-T G.651), DSF (ITU-T G.653), Cut-off Shifted Fiber (ITU-T G.654, Large Area type), NZD (ITU-T G.655), BIF/UBIF (Bend Insensitive Fiber ITU-T G.657B3)Cladding Diameter80 - 150 μmCoating Diameter100 - 3000 μmFiber Cleave Length 5 - 16 mmAverage Splice Loss SM:0.02 dB, MM:0.01 dB, DSF:0.04 dB, NZD:0.04 dB Splice Time 6 seconds (Semi-auto mode) 9 seconds (Regular mode)Heat Time6 9 (60 mm, Tyco SMOUV1120-01, coating diameter 250-900 µm, Power mode) 13 (60 mm, FITEL S921, coating diameter 250 µm, Power mode)15 (60 mm, FITEL S921, coating diameter 900 µm, Power mode)Splice Programs Max. 300Automatic Splicing Selection AvailableHeat Programs Max. 100Automatic Heating Start AvailableApplicable Sleeves20/40/60 mmFiber Holder Tight Holder (loose tube applicable) or Removable Fiber Holder SystemTension Test 1.96 NSplice Return Loss70 dB or moreAttenuation Splice Function Intentional high splice loss of 0.1 dB to 15 dB (0.1 dB step) can be made for an inline fixed attenuator Fiber Image Magnification104X, 278X, 556XSplice Result Storage20,000Image Capture Capacity Last 100 images to be automatically captured + up to 100 images to be stored permanentlyDimension 139 W x 209 D x 114 H mm (not including shock absorber) 179 W x 246 D x 131 H mm (including shock absorber)Weight 1.7 kg (without battery), 2.0 kg (with battery)Monitor 4.3-inch wide color LCD monitor with touch screenPropulsion (motor)8 N (designed value)Data Output USB ver. 2.0 mini B x 1 port, Standard A x 1 portBattery Capacity7Typical 200 splice/heat cycles, 90 second/cycleAltitude5000 mWind Protection15 m/sOperating Temperature-10 to + 50 °C (without excessive humidity)Storage Temperature-40 to +60 °C (without excessive humidity)Humidity0% to + 95% RH (non-condensing)Power Source AC Input 100 to 240 V (50/60Hz), DC Input 11 to 24 V6 The heating time may vary depending on the type of sleeve. In addition, the first heating time after turning the power on can be longer than the standard heating time.7 The number of splicing and heating cycles the machine can perform with a fully charged battery at 20 ̊C in semi-auto splicing mode and regular heating mode. The number of cycles may vary depending on the battery status and operating conditionsS179 Fusion Splicer | 3For additional information please contact your sales representative.You can also visit our website at or call 1-888-fiberhelp (1-888-342-3743) USA or 1-770-798-5555 outside the USA.Fusion Splicer Customer Service,Training and Service Center Toll Free: 866-452-9516Phone: 678-783-1090Fax: 678-783-1093Email:**********************OFS Corporate Headquarters 2000 Northeast ExpresswayNorcross, Georgia 30071, USAOrdering Information Code Description S179A-21S179A splicer with 10mm Fiber Holder S712T-010S179A-31S179A splicer without any Fiber Holders S179A-EX-10S179A splicer with S712T-010 holder, S211B stripper, cleaver, wipes and fluid S179A-EX-900S179A splicer with S712S-250 and S712S-900 holder, S211B stripper, cleaver, wipes and fluid Standard Package Item P/N Quantity FITEL S179 Fusion Splicer S179A 1Built-in Battery Pack S947A 1Hard Carrying Case HCC-051Spare Electrodes ELR-011AC Adapter S979A 1AC Power Cord -1Cooling Tray CTX-031Cleaning Brush VGC-011Electrode Sharpener D51111Tool Case TCC-011LCD anti-reflective sheet ARS-011Instruction Manual UMC-021Quick Reference Guide FTS-B5261Optional Components Item P/N Quantity USB Cable USB-011Battery Charger S980A 1Soft Carrying Case SCC-011Angled Stand AGS-021Working Belt WBT-011Car Cigarette Cable CDC-041Heater Clamp Base for SOC HBS-011Tight Holder 16 mm Cleave Length 10 mm Cleave Length Universal S712-T-016 S712T-010 S712T-UN 1 pair 1 pair 1 pair Fiber Holder 160 µm coated fiber S712S-160 1 pair 250 µm coated fiber S712S-250 1 pair 500 µm coated fiber S712S-500 1 pair 900 µm coated fiber S712S-900 1 pair Fiber Holder Loose Tube Fiber (Left side)S712S-LT-L 1 pair Loose Tube Fiber (Right side)S712S-LT-R 1 pair SOC Holder S712C-SGS9-L 1 Seiko Giken FC/SC ferrule (9 mm)S712C-SGS5-L 1 Seiko Giken FC/SC ferrule (5 mm)S712C-SGL9-L 1 Seiko Giken LC ferrule (9 mm)S712C-SGL5-L 1 Seiko Giken LC ferrule (5 mm)S712C-DM25-L 1 Seiko Giken TOUCH Plus SC (9 mm)S712C-SGC5-R 1 Diamond E2000TM /E3000TM ferrule S712C-SGC9-R 1 Seiko Giken Cordage (5 mm)S712C-DMC5-R 1 Seiko Giken Cordage (9 mm)S712C-SGC9-R 1 Diamond Cordage (5 mm)S712C-DMC5-R 1 Wi-Fi dongle WFD-011AccessoriesStandard Package。

837Features ––––––––––––––––––––––––• Reliable housing constructionSince all the contacts in this connector are individually andtotally surrounded by housing walls (egg-crate style), and since the contact pitch is 5.0mm (.197"), the electrical creep distances and dielectric spacings are great enough to meet most safetyrequirements. In addition, the housings are sturdy enough to prevent deformation and ensure smooth mating.• Easy contact insertionContacts can be inserted into the housing easily and smoothly.• Box-shaped contactThe box-shaped contact used successfully in the VH and NH connectors is used as a socket contact in the XL connectors.This contact covers a wide range of applications from low-voltage, low-current signal circuits to power supply circuits.• Two kinds of connectionsXL connectors can be used for wire-to-wire connection and for printed circuit board connection.Current unit: AXL CONNECTORDisconnectable Crimp style Wire-to-wire connectorsSpecifications –––––––––––––––––––• Current rating:10A AC, DC max.• Voltage rating:300V AC, DC max.• Temperature range:-25˚C to +90˚C(including temperature rise in applying electrical current)• Contact resistance:Initial value/7m Ωmax.After environmental testing/10m Ωmax.• Insulation resistance:1,000M Ωmin. • Withstanding voltage:1,500V AC/minute • Applicable wire:AWG #26 to #160.13 to 1.25mm 2• Applicable panel thickness:0.7 to 2.4mm(.028" to .094")*Contact JST if Lead-Free product is required.*Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog.* Contact JST for details.Note: The current rating varies depending on the number ofcircuits and the wire size used in each connector.The table below lists the current rating as a function of the number of circuits and wire size.Standards ––––––––––––––––––––––0Recognized E603891Certified LR208122R75150XL CONNECTORContact––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––Note:1. Contact JST for special products.2. Contact JST for brass products.Housing ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––Material: Nylon 66, UL94V-0, white838XL CONNECTOR Housing –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––Note:1. XL connectors with any number of circuits can be used either panel mounted or free hanging. The panel hole dimensions are given on the next page.2. Contact JST for special products.839840XL CONNECTORContact position location numbers–––––––––––––––––––––––––––––––––––––––––––XL CONNECTOR Panel layout––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––Note:1. Punch holes in the panel according to the sketch and table shown above. Burrs must be removed.2. The strength of the panel must be considered when punching two or more holes.3. The connector must be inserted from the same side as the hole is punched.Assembly layout––––––––––––––––––––––––––––––––––––––––––––––––––––––––––Applicator for the semi-automatic press AP-K2N–––––––––––––––––––––––––––––––841。

DMVCI系列隔离器使用说明书伊顿电气有限公司Eaton Electrical Ltd.装箱单随机文件和附件产品型号说明书合格证手柄操作轴柜外操作机构标准件限制件DMV63CI/3.41111DMV100CI/3.411111DMV63CI/3.4G 111111DMV100CI/3.4G 1111111DMV160-630CI/3.41111DMV160-630CI/3.4G 11111DMV1000CI/3.41112DMV1000CI/3.4G 111112DMV1250-1600CI/3.41114DMV1250-1600CI/3.4G111114尊敬的用户：欢迎您使用本公司生产的DMVCI系列隔离器产品!为了您能安全正确地使用本系列产品,敬请您在安装调试和使用前熟读本说明书。

本产品符合GB/T14048.3、IEC60947-3标准，并通过了国家CCC认证。

目录一.用途 (4)二.产品的工作条件 (4)三.结构与特点 (4)四.主要规格及技术参数 (4)五.外型与安装尺寸 (5)六.安装方法 (9)七.使用与维修 (14)八.订货须知 (14)一、用途DMVCI系列隔离器（以下简称开关），适用于交流50Hz，额定电压690V，额定电流为63～1600A。

在配电系统中做隔离电路用。

二、产品的工作条件开关在如下条件下可靠运行：安装地点的海拔高度不超过2000米；周围空气温度不超过+40℃，而且其24h内的平均温度值不超过+35℃；周围空气温度的下限为-5℃；最高温度为+40℃时，空气的相对湿度不超过50%，在较低的温度下可以允许有较高的相对湿度，例如20℃时达90%。

对由于温度变化偶尔产生的凝露应采取特殊的措施；污染等级为3级。

注：若预期使用条件与以上标准不同，应在落单前提出。

三、结构与特点开关由不饱和聚酯玻璃纤维增强模塑料(DMC)制造的外壳；弹簧储能加速机构能快速实现接通与分断；触头结构为并联双断点两个分离触头面，并由片状弹簧保证触头压力；开关能够自动确定通断的极限位置，而且具有明显的通断标记来指示通断位置。

21e6-571-1997-b1规格书一、产品简介21e6-571-1997-b1是一款高性能的电子设备，具有多种功能和广泛的应用领域。

该产品采用先进的技术和材料，具有稳定可靠的性能，是目前市场上颇受欢迎的产品之一。

二、产品参数1. 尺寸：长×宽×高=xxx×xxx×xxx（单位：毫米）2. 重量：xxx（单位：千克）3. 工作温度：-20℃~60℃4. 电源电压：AC 100-240V，50/60Hz5. 功率消耗：xxxW6. 存储容量：xxxGB7. 通信接口：xxx接口8. 屏幕尺寸：xxx英寸9. 其他参数：xxx三、产品特点1. 高性能：采用先进的处理器和存储器，具有快速的数据处理能力和大容量的存储空间。

2. 多功能：支持多种操作系统，可适用于不同的应用场景，具有高度的灵活性和通用性。

3. 稳定可靠：采用优质的材料和工艺，具有良好的抗干扰能力和稳定的性能表现。

4. 易操作：人性化的设计，简单易懂的操作界面，方便用户使用和维护。

四、应用领域1. 工业自动化：可用于工业控制系统、智能制造设备等领域。

2. 通讯网络：可用于通讯基站、数据中心等领域。

3. 医疗设备：可用于医学影像诊断、医疗监护等领域。

4. 交通领域：可用于智能交通系统、车载电子设备等领域。

5. 其他领域：根据实际需求，可广泛应用于各种领域。

五、使用注意事项1. 请在规定的工作温度范围内使用，避免在过高或过低的温度环境中操作。

2. 请注意防潮防水，避免产品受潮和进水导致损坏。

3. 请使用合适的电源电压和电流，避免过载和短路现象发生。

4. 请按照说明书正确操作和维护设备，避免因操作不当引起的故障和损坏。

六、售后服务1. 本产品提供一年质保服务，质保期内免费维修和更换损坏零部件。

2. 质保期外，提供有偿维修和零部件更换服务，具体费用按实际情况收取。

七、结语21e6-571-1997-b1作为一款高性能、稳定可靠的电子设备，具有广泛的应用前景和市场需求。

高性能1000-1500W连续激光器说明书武汉锐科光纤激光技术股份有限公司Wuhan Raycus Fiber Laser Technologies Co., Ltd.目录1 安全信息 (1)1.1 安全标识 (1)1.2 激光安全等级 (1)1.3 安全标识 (2)1.4 光学安全 (3)1.5 电学安全 (3)1.6 其他安全注意事项 (3)2 产品介绍 (4)2.1 产品特性 (4)2.2 型号说明 (4)2.3 装箱清单 (5)2.4 开箱及检查 (5)2.5 运行环境 (5)2.6 注意事项 (7)2.7 产品性能 (7)3 安装 (10)3.1 整机尺寸图 (10)3.1.1高性能1000-1500W连续激光器整机尺寸 (10)3.2 输出光缆的尺寸与安装 (11)3.2.1高性能1000-1500W连续激光器输出光缆 (11)3.3 冷却系统安装与要求 (12)3.4 安装注意事项 (13)4 产品使用 (15)4.1 前面板 (15)4.2 后面板 (15)4.3 电源连接 (16)4.4 接口定义 (16)4.4.1控制接口 (16)4.4.2 RS-232串口 (18)4.4.3以太网TCP/IP接口及连接步骤 (19)4.7 激光器的上位机功能 (22)4.7.1控制界面 (23)4.7.2日志界面 (24)4.7.3关于 (24)4.7.4语言选择 (25)4.7.5授权 (25)4.7.6模式选择 (26)4.7.7主控模块 (26)4.7.8电源监控 (27)4.8 控制模式选择 (28)4.8.1控制模式接线图 (28)4.8.2单机模式（内控模式）（顺序接上4.6） (29)4.8.3外控模式（顺序接上4.6） (29)4.8.4 AD模式 (30)4.8.5控制时序图 (31)4.8.6红光控制 (32)4.9 关闭操作顺序 (33)4.10 蓝牙APP操作说明 (33)4.10.1登录 (33)4.10.2连接 (33)4.10.3设备 (35)4.10.4 我的页面 (38)4.10.5软件介绍 (40)4.10.6工作流程 (40)5 常见警及处理措施 (41)5.1 告警显示 (41)5.2 告警处理 (41)6 质保及返修、退货流程 (44)6.1 一般保修 (44)6.2 保修的限定性 (44)6.3 技术支持及产品维修 (44)1安全信息感谢您选择锐科光纤激光器，本用户手册为您提供了重要的安全、操作、维护及其它方面的信息。

JAZZ OPLC™ Technical Specifications Model JZ20-T40/JZ20-J-T40This guide provides specifications for Unitronics’ Jazz™ Micro-OPLC™ JZ20-T40/JZ20-J-T40.You can find additional documentation on the Unitronics’ Setup CD and in the Technical Library at .Technical SpecificationsPower supplyInput voltage 24VDCPermissible range 20.4VDC to 28.8VDC with less than 10% rippleCurrent Consumption See Note 1Max. current consumption 170mA@24VDCTypical power consumption 3WNotes:1. If you do not use the LCD backlight, subtract 35mA from the maximum currentconsumption value.BatteryBack-up 7 years typical at 25°C, battery back-up for RTC and system data,including variable data.Digital InputsNumber of inputs 18 (two groups) – see Notes 2 & 3Input type pnp (source) or npn (sink)Galvanic isolation NoneNominal input voltage 24VDCInput voltagepnp (source) 0-5VDC for Logic ‘0’17-28.8VDC for Logic ‘1’npn (sink) 17-28.8VDC for Logic ‘0’0-5VDC for Logic ‘1’I0-I15 I16-I17Input current 3.7mA@24VDC 1.2mA@24VDCResponse time 10mSec typical 20mSec typicalInput cable length Up to 100 meters, unshieldedHigh speed inputs Specifications below apply when wired as H.S.C. See Note 4.Resolution 16-bitFrequency 10kHz maximumMinimum pulse width 40µsNotes:2. Inputs I0-I15 are arranged in a single group. Via wiring, the entire group may be set toeither pnp or npn.3. I16 & I17 may be wired as either digital or analog inputs, as shown in the product’sinstallation guide. I16 & I17 may be wired as npn, pnp, or 0-10V analog inputs. 1 inputmay be wired as pnp, while the other is wired as analog. If 1 input is wired as npn, theother may not be wired as analog.4. I0 and I1 can each function as either a high-speed counter or as a normal digital input.When used as a normal digital input, normal input specifications apply.1JZ20-T40/JZ20-J-T40Digital OutputsNumber of outputs 20 pnp (source) (in two groups) – See Note 5Output type P-MOSFET (open drain)Isolation NoneOutput current 0.5A maximum per output, total maximum for each group: 4A. Maximum frequency 50Hz (resistive load)0.5Hz (inductive load)Short circuit protection YesShort circuit indication Yes, by softwareOn voltage drop 0.5VDC maximumPower supply for outputsOperating voltage 20.4 to 28.8VDCNominal voltage 24VDCNotes:5. Outputs O0-O11 share a common power signal.Outputs O12-O19 share a common power signal.All outputs share a common 0V signal.Analog InputsNumber of inputs 4, according to wiring as described above in Note 3AN0 and AN1 AN2 and AN3Input range 0-20mA, 4-20mA 0-10VDCInput impedance 154Ω20KΩMaximum input rating 30mA 28.8VGalvanic isolation NoneConversion method Succesive approximationResolution 10 or 12-bit (0 to 4095) (Via Software)Conversion time All analog inputs are updated every 8 PLC scans, regardless of howmany inputs are actually configured.Precision ± 2%Status indication Yes – if an analog input deviates above the permissible range, itsvalue will be 4096.Input cable length Up to 30 meters, shielded twisted pairDisplayType STN LCDIllumination backlight LED, yellow-green, software controlled(LCD backlight; enables the display to be viewed in the dark) Display size 2 lines, 16 characters longCharacter size 5x8 matrix, 2.95x5.55mmKeyboardNumber of keys 16 keys, including 10 user-labeled keysKey type Metal dome, sealed membrane switchSlides Slides are installed under the operating panel faceplate. They labelthe keys and provide a logo picture. The unit is supplied with a set ofslides already installed. A blank set is available by separate order.2JZ20-T40/JZ20-J-T403Program See Note 6 Ladder code memory48K (virtual) Execution time1.5 µSec for bit operations (typical) Memory bits (coils)256 Memory integers (registers),16 bit256 Timers64 HMI displays60 user-designed displays available HMI variables64 HMI variables are available to conditionally display text and data. List variables add up to 1.5K's worth of HMI capacity. Communication Via a built-in USB port or - Add-On module.See Note 6-9 GSM-supportSMS messages to/from 6 phone GSM numbers, up to 1K of user-designed messages. Supports Remote Access. MODBUSSupports MODBUS protocol, Master-Slave Baud rateAccording to add-on port module USBPort typeMini-B Galvanic isolationNo SpecificationUSB 2.0 compliant; full speed Baud rate range300 to 115200 bps CableUSB 2.0 compliant; up to 3m Notes:6. The JZ20 built-in USB port may be used for programming. Add-on Modules are available by separate order for communication and cloning. Note that the USB port and an Add-on module cannot be physically connected at the same time7.Add-on module JZ-PRG, with 6-wires communication cable (supplied in PRG kit – see the JZ-PRG Installation Guide) can be used: - for programming - to connect a modem 8.Add-on module JZ-RS4 (RS232/485), with a standard 4-wire communication cable can be used: - for programming - to communicate with other devices (including modems/GSM) - for RS485 networking. 9. Add-on module MJ20-ET1 enables communication over 100 Mbit/s TCP/IP network:- Programming/data exchange with Unitronics software; - Data exchange via MODBUS TCP as Master or Slave.JZ20-T40/JZ20-J-T404 MiscellaneousClock (RTC)Real-time clock functions (date and time). Environmental Operating temperature0° to 50°C (32° to 122°F) Storage temperature-20° to 60° C (-4° to 140°F) Relative humidity (RH)10% to 95% (non-condensing) Mounting methodPanel mounted (IP65/NEMA4X) DIN-rail mounted (IP20/NEMA1) DimensionsSize 147.5X117X46.6mm "5.807 ( X "4.606 X 1.835"). See Note 10 Weight 304 g (10.7 oz) Notes:10. For exact dimensions, refer to the product’s Installation Guide. Mounting Panel mountingInsert into cut-out: 117 x 89mm (WxH) 4.606”x 3.504” DIN-rail mounting Snap unit onto the DIN railThe information in this document reflects products at the date of printing. Unitronics reserves the right, subject to all applicable laws, at any time, at its sole discretion, and without notice, to discontinue or change the features, designs, materials and other specifications of its products, and to either permanently or temporarily withdraw any of the forgoing from the market.All information in this document is provided "as is" without warranty of any kind, either expressed or implied, including but not limited to any implied warranties of merchantability, fitness for a particular purpose, or non-infringement. Unitronics assumes no responsibility for errors or omissions in the information presented in this document. In no event shall Unitronics be liable for any special, incidental, indirect or consequential damages of any kind, or any damages whatsoever arising out of or in connection with the use or performance of this information.The tradenames, trademarks, logos and service marks presented in this document, including their design, are the property of Unitronics (1989) (R"G) Ltd. or other third parties and you are not permitted to use them without the prior written consent of Unitronics or such third party as may own themDOC05010-A2 06/14。

如需产品安装、维护或支持信息，请参考文档末的信息。

4 – 8英寸/DN100 – DN20010英寸/DN250及以上尺寸专利设计1.0 产品描述供货尺寸• 4 – 8英寸/DN100 – DN200（感温泡长度为6英寸/150毫米）• 10英寸/DN250及以上尺寸（感温泡长度为6英寸/150毫米）最大工作压力• 300 psi/2068 kPa/21 bar功能• 兼具温度计套管和无环扣机械接口的特点，可提供方便快捷的连接• 配备 NPT （标准）、UNEF （可选）或BSPP （可选）出口连接 • 非常适用于感温泡长度为6英寸/150毫米的各种工业玻璃温度计• 采用流线型探头，可减小主管内部的摩擦损失• 插入流体内部的长度为3英寸/80毫米• 允许2 ½英寸/73毫米的隔热保温套层出口连接：（请指定选择） 配备¾英寸内螺纹NPT 连接配备1 ¼英寸 – 18 UNEF 内螺纹连接配备¾英寸内螺纹BSPP 连接（仅用于欧洲地区）2.0 认证/列名产品的设计和制造依照Victaulic （唯特利）质量管理体系进行（根据ISO-9001:2008获得LPCB 认证）。

Victaulic （唯特利）无环扣温度计接口 924型11.06-CHI系统编号位置提交人日期规格部分段落批准人日期3.0 规格 – 材料本体和螺母：符合ASTM A536之65-45-12等级要求的球墨铸铁。

本体和螺母涂层：黑色醇酸树脂瓷漆。

套环：ASTM A569热轧、酸洗及油处理钢，按照ASTM B633 FE/ZN 5, finish Type III进行电镀锌。

底座/衬垫：（请指定选择1）“E”级EPDM（三元乙丙橡胶）EPDM（三元乙丙橡胶）（绿色条纹色码）。

温度范围：–30°F至+230°F/–34°C至+110°C。

可用于指定温度范围内的热水系统，以及多种稀酸、无油空气和众多化工应用场合。