FOXBORO卡件 21h1b7 b3(CP60)

More of what you need to work smarter,AccessoriesV i s u a l I n d e x59RG D-17T1RG D-17Partek Sleeve D-18ParKoil™ (PG) D-19GuardsO-Rings for CA, CE,CF MetricFlange “D” Rings Caterpillar ® Style FlangesT ube O-Ring Fittings and CompressorFittingsO-Rings for Compression Fittings (IT126)O-Rings for C9, OC, 1C Metric Swivels88HC-H Clamp D-2488DB Clamp D-24Hose Assembly D-26Workstations3/4 Reel Rack D-2772B-Cabinet D-28HR6 Hose Bin D-28Hose Adapters D437° Flare Metric Triple-Lok ®Sizes: 6 mm – 38 mmMaterials : Steel, Stainless Steel Pressures : Up to 7200 psi60° Cone BSPPK4Sizes : 1/8” – 2”Materials : Steel Pressures : Up to 5000 psi30° Flare Komatsu StyleSizes : M14 x 1.5 – M33 x 1.5Materials : Steel Pressures : Up to 4000 psiO-Ring Face-Seal Metric Seal-Lok™Sizes: 1/4” – 2”Materials: Steel, Stainless Steel Pressures: Up to 9200 psiJapanese Industrial Standard JISSizes : 1/4” – 1”Materials : Steel Pressures : Up to 5000 psiWhen ordering Parker Adapters, please state the Catalogued Number of each type of adapter desired. Be sure to double check tube and hose sizes of items required.To select proper seal materials for specific applications, refer to Media Compatibility Chart in Tube Fitting Catalog 4300, or contact your Parker Tube Fitting Distributor.If in doubt about which type or size of fitting to specify, consult your Parker Tube Fitting Distributor. In addition Parker Field Sales, Technical Services,the Tube Fitting Division and your local Parker Service Center will help you find answers to all your issues.Phone: (614) 279-7070Fax: (614) 279-7685Web: /tfdNote: Refer to Parker Catalog 4300 for more detailed application information.CALL TOLL-FREE 1-800-C PARKER (1-800-272-7537)Parker Information Center for catalogs, literature or additional information.O-Ring Face-Seal Seal-Lok™ Sizes: 6 mm – 38 mm Materials: Steel, Stainless Steel Pressures: Up to 9200 psi37° Flare FittingsTriple-Lok ®Sizes: 1/8” – 2”Materials: Steel, Stainless Steel, BrassPressures: Up to 9000 psiPipe Fittings and Port AdaptersSizes: 1/8” – 2”Materials : Steel, Stainless Steel, BrassPressures : Up to 7200 psiPipe SwivelsSizes : 1/8” – 2”Materials : Steel, Stainless Steel Pressures : Up to 5000 psiConversion AdaptersSizes: 1/4” – 1-1/2”Materials : Steel, Stainless Steel Pressures : Up to 7700 psiHydraulic Flange and Flange AdaptersSizes : 3/4” – 3”Materials : Steel, Stainless Steel Pressures : Up to 6000 psi15T3SAE (Code 61) Flange – Male SAE (JIC) 37˚ FlareCaution: Do not use the T3 flange to tube or swivel nut to tube adapter in hose assembly applications inwhich pressures exceed the SAE100R2 working pressure range.17T3SAE (Code 61) Flange – Male SAE (JIC) 37˚ Flare - 45˚ Elbow19T3SAE (Code 61) Flange – Male SAE (JIC) 37˚ Flare - 90˚ Elbow39T3Male - Female Swivel - SAE (JIC) 37˚ - 90˚ Elbow41T3Male - Female Swivel - SAE (JIC) 37˚ - 90˚ Elbow - Long4AH3SAE Code 61 Flange - Male SAE (JIC) 37˚ Flare - 5000 psi Caution: Do not use the T3 flange to tube or swivel nut to tube adapter in hose assembly applications in which pressures exceed the SAE100R2 working pressure range.4FH3SAE Code 61 Flange - Male SAE (JIC) 37˚ Flare - 5000 psi -45˚ Elbow4NH3SAE Code 61 Flange - Male SAE (JIC) 37˚ Flare - 5000 psi -90˚ Elbow6AH3SAE Code 62 Flange - Male SAE (JIC) 37˚ Flare6FH3SAE Code 62 Flange - Male SAE (JIC) 37˚ Flare - 45˚ Elbow4AJMCode 61 Flange - Male Seal-Lok4FJMCode 61 Flange - Male Seal-Lok - 45˚ Elbow4NJMCode 61 Flange - Male Seal-Lok - 90˚ Elbow6NH3SAE Code 62 Flange - Male SAE (JIC) 37˚ Flare - 90˚ Elbow6NJMCode 62 Flange - Male Seal-Lok - 90˚ Elbow6FJMCode 62 Flange - Male Seal-Lok - 45˚ Elbow6AJMCode 62 Flange - Male Seal-LokNote:*5000 psi with 4A, 4F and 4N Fittings and 50H Flange Halves.There are two non-interchangeable SAE split flanges: a: S tandard or Code 61 is for 3,000psi to 5,000psi maximum, depending on size.b.H igh Pressure or Code 62 is for 6,000psi maximum, r egardless of size. The flange head is “V” notched for identification.Consult these tables to determine flange halves and flange kits specifications.High Pressure (Code 62)Standard Pressure (Code 61)Note: For use with 4A, 4F and 4N Flanges.50H5000 psi Flange Half (Code 61)Note: For use with 4A, 4F and 4N Flanges.Note: High pressure applications also require the use of Code 61 Flange End hose fittings.51HSAE Flange Half (Code 61)5050HK5000 psi Flange Kit (Code 61)5151HKSAE Flange Kit (Code 61)HFHSAE Flange Half (Code 62) HFHFHKSAE Flange Kit (Code 62) 8FHFlange Half (8000 psi)8FHFHKFlange Kit (8000 psi)DIN and ISO Metric PortsDIN (German) and ISO (International Organization for Standardization) flange heads are the same as SAE flange heads. By comparison, the ports have the same configura-tion except that the DIN and ISO Type I ports accept metric bolts. This requires specialflange halves in most sizes.Note: High pressure applications also require the use of Code 62 Flange End hose fittings.M1HDIN (ISO) Flange HalfM1M1HKDIN (ISO) Flange Kit (Code 61)M2M2HKDIN (ISO) Flange Kit (Code 62)M2HDIN (ISO) Flange Half (Code 62)711509O-Rings - SAE Thread (Compound N552-90)*711510O-Rings - Code 61 and Code 62 Flanges (Compound N552-90)**Note: F or use with petroleum base fluids, other compounds available for Phosphate Ester fluids.Please contact The Parker Hannifin Seal Group/O-Ring Division (1-800-C-PARKER) for additional information.C9RG O-Rings for CA, CE, CF MetricC9RG O-Rings for C9, OC, 1C Metric SwivelsD9DTBonded Seal for BSPP Port Fittings*Note: D 9DT must be ordered from the Tube FittingsDivision. Please contact TFD for additional size and product information.XARGFlange “D” Rings Caterpillar ®Style FlangesJ0RGO-Rings - Seal-Lok ®Note: O -Rings for use in Seal-Lok ® connections are illustrated in actual size. Part numbers for O-Ringsused in Seal-Lok ® and in SAE port connections are also listed in the table. O-Rings are supplied in Nitrile NBR compound, 90 durometer hardness.SAE 711509-4-8Seal-Lok J0RG-8-8Photo shows an actual comparison between an SAE port O-Ring (top) and a Seal-Lok ® O-Ring (bottom). They differ in both diameter and cross section.8ARGFlange “D” Rings for 76 Series Style FlangeT1RGO-Rings for Compression Fittings (1T126)Charge Ports CapsR134aR12CORGCaptive O-Ring Assembly ToolsParker’s new CORG Assembly Tools are designed to facilitate the installation of the O-Ring into the half-dovetail groove of the O-Ring face seal fitting.Note: C ORG Assembly T ools must be ordered from the T ube Fittings Division (614) 279-7070.Note: O -Rings listed are for use with petroleum base fluids. Other compounds are available for Phosphate Ester fluids by special order. For Viton ® or otherO-Ring compounds, consult Parker Hannifin, Seal/O-Rings Products Division (1-800-C-PARKER.)Bench TypeHand Type59RGO-Rings for Tube O-Ring Fittingsand Compressor FittingsNote:T he above O-Rings (RG) have HNBR compound number N1195-70 (green).Accessory Selection Guide – Partek Sleeve (AS-B, AS-Y or PS)Note: T he inside flat “A” dimension correspondswith the inside diameter “B” dimension. For example, AS-Y -13 flat surface “A” is 1.34 in. This offers a .86 in. inside diam-eter “B”. Hose with a smaller O.D. can be specified for this size sleeve. Parker 201-5 hose has a .58 in. O.D. and can easily be inserted in the Partek AS-Y -13Sleeve.Note: 1. T he dimensions shown are related to the hose outside diameter and may not fit over the fitting. For over the fitting applications, a larger sizesleeve may be required.2. Cut lengths are available. Contact your local distributor for prices ().Partek SleevePartek “PS” SleeveParker’s Partek Nylon Protective Sleeving gives you tough hose abrasion protection two ways. First, per the ISO 6945 specification, Partek has a unique tubular weave nylon construction, Partek “AS” is strong enough to withstand greater than 200,000 abrasion cycles without wearing through the fabric at any loca-tion. Partek “PS” can withstand greater than 50,000 abrasion cycles. In addition, this weave also gives an exceptionally smooth interior wall, allowing rubber hose to move freely inside the sleeve. This provides easy installation and prevents any internal abrasion problems. Partek sleeving is available in either black or yellow and in sizes to fit most hydraulic hose. Partek, the quick and easy solution to hose protection in high-abrasion areas.Temperature Range: -67°F to +248°F (-53°C to +120°C)Accessory Selection Guide – PolyGuard (HG)• S hield hose from abrasion and cuts • Minimize kinking• Cannot rust or corrode • R esist water, oil, gasoline, hydraulic fluid, and most solvents • I deal for bundling plastic tubing or hose lines • E asy to install without removing hose lines; no clamps neededPolyGuardHeavy-duty polyethylene provides protection in rugged operating conditions.Great for b undling high-pressure hose lines.Cut edges can be smoothed by applying heat.CAUTION: This material will support combustion.Color: BlackTemperature Range:0˚F to +200˚F (-17˚C to +93˚C)Parkoil ™Lower-cost protection for applications that call for a tighter bend radius and are less demanding.Cut edges can be smoothed by applying heat.CAUTION: This material will support combustion.Color: BlackTemperature Range:0˚F to +200˚F (-17˚C to +93˚C)Accessory Selection Guide – ParKoil ™ (PG)Accessory Selection Guide – Spring Guard and Armor GuardNote:Spring Guard and Armor Guard are packaged in 10 ft. pieces.Parker Spring Guard and Armor Guard are two products that prolong the life of hose lines that are exposed to rugged operating conditions. They distribute bending radii to avoid kinking in hose lines and protect hose from abrasion and deep cuts. Guards areconstructed of steel wire and plated to resist rust.Spring Guard (SG)Armor Guard (AG)Accessory Selection Guide – Firesleeve (FS-F)Parker Firesleeve is a flame resistant sheath that protects the hose from extreme temperature conditions. Firesleeve easily slides over hoses and readily expands over fitting. It can be assembled with Parker FSC or properly sized wormgear clamp.Construction: Braided fiberglass sleeve and an orange,bonded and seamless silicone rubber cover.Specifications: Conforms to SAE Aerospace Standard 1072A Type 2A.Temperature Range:-54˚C to +260˚C (-65˚F to +500˚F).Note: T he Firesleeve inside dimension (I.D.)must exceed the outside diameter (O.D.) of the hose and offer an allowance for easy hose insertion. For example, 201-16 has a 1.23 in. O.D. FS-S-24, with an I.D. of 1.46 in., is the suggested Firesleeve. Note: P arker FSC Clamp fits all hoses up to2 in. O.D. Note: P arker HC Clamps (wormgear) are listedon page D-24.Note: See Page D-22 for Firesleeve assembly instructions.Firesleeve (FS-F)FSC ClampPart Number: FSC(One size fits all hoses up to 2 inch O.D.)Accessory Selection Guide – Firesleeve (cont.)1. A ssemble one end fitting on hose. Cut firesleeve to same length as hose. Cover approximately 1” of each end of fire-sleeve with FSS sealant and allow to dry.2. P ush firesleeve back from cut end of hose and assemble the second end fitting. Then pull firesleeve completely over both sockets.3. I nsert tail of FSC clamp into FST clamping tool.4. P osition clamp around middle of socket and tighten with tool. Bend end of band back over buckle. Repeat on other end.Repair any scuffs or abrasions in firesleeve with FSS sealant.FSC ClampUsed to attach firesleeve around socket on hose sizes with a 2” maximum O.D.FST Clamp ToolPart Number: FST -711617 Used to secure FSC clamp.FSS Firesleeve SealantKeeps end of firesleeve from fraying - for neater, longer lasting installation.FiresleeveAssembly InstructionsAccessory Selection Guide – CL ClampVinyl coated steel clamps provide hose support where long lengths are used. Provides neater installation of hose lines, minimizes hose chafing and prevents damage to hose.Material: CR Steel with Zinc PlatingCoating: Black Vinyl Plastisol - 0,8 mm (0.03 inch) thick.Temperature Range:-40°C to +107°C (-40°F to +225°F).Accessory Selection Guide – HC, 88HC-H and 88DB ClampThe Parker HC Clamp is a stainless steel worm gear clamp designed for low presure industrial hose applications.Material: Stainless steelSpecifications: SAE J1508, Type F and Type HD88HC-HSeries Hose Clamp(High Torque Wormgear)88DBSeries Heavy Duty Hose Clamp(Double Bolt Hose Clamp)HC Hose Clamp TableNote: See 88 Series Assembly Instructions for proper 88HC-H clamp attachment.Accessory Selection Guide – Protection Shields (HP , HT, and HP-B)Prevent hose abrasion while extending your hose life. Parker Hose Protection Shields extend hose life by protecting the hose from abrasion that occurs when hose rubs against other hose, metal or concrete. Parker hose shields are resistant to oil, lubricants, gasoline, most solvents and can withstand ambient temperatures from -40° to +300° F . Easily installed and secured by cable ties without disconnect-ing any hose lines. Use with hose from 1/4” to 2” I.D.♦ Eliminate hose abrasion on concrete, metal or any rough surface. ♦ Guard against hose deterioration on mobile hydraulic equipment. ♦Let Parker fill all your hydraulic and pneumatic hose product needs.Hose Protector Shields are a fast and extremely cost effective way to isolate fluid lines from direct contact with other lines, components or structural members. They’re available in 4-inch, 6-inch and 8-inch lengths and the width can be trimmed to satisfy a variety of situations. These flexible protectors simply clamp around the hose and are securely held in place by nylon cable ties which are included. The cable ties are recessed in molded grooves to protect them from abrasion. You don’t need to disconnect a line to install a Parker Hose Protector Shield the way you do with a continuous tubular sleeve. Just wait until the installation is up and running to see exactly where contact needs to be prevented.Parker Hose Protector Shields are available in bulk quantities and in convenient assortments in 4”, 6” and 8” sizes. Cable ties are included with all protectors and are also available in bulk.Hose ShieldsTie Wraps HP-B-13X18-KIT2 ea. HP-13 RFL HT -12-KIT 30 ea. HT -12 Tie Wraps 2 ea. HP-15 RFL HT -16-KIT 30 ea. HT -16 Tie Wraps4 ea. HP-18 RFLHT -22-KIT15 ea. HT -22 Tie Wraps20 Hose Protectors and 60 Tie Wraps for each size are in point of purchase display box.HP-B-13-RFL 10 ea. HP-B-13 Hose Protectors (4”). 30 ea. HT -12 Tie Wraps in a sealed plastic bag.HP-B-15-RFL10 ea. HP-B-15 Hose Protectors (6”). 30 ea. HT -16 Tie Wraps in a sealed plastic bag.HP-B-18-RFL5 ea. HP-B-18 Hose Protectors (8”). 15 ea. HT -22 Tie Wraps in a sealed plastic bag.Contact your authorized Parker Hose Products Distributor for pricing and delivery information.Note: Parker Hose Protector Shield products are intended to prevent damage. They are not suitable as patches or repairs for lines which are already damaged or worn beyond safe use standards.Counter DisplayThe complete on-site complete hose assembly workstation design (above) includes:• TH7-5-C—6’ table with 1 hose reel and 1 bottom shelf • TH7-6—16 hose reel system, with rotating base • T H7-7—15” wide table set up for Parker 239 or 339 Cut-Off Saw Specifications: HoseFab Table (heavy duty)• Laminated wood table top • 1-1/2” square tubing structure • Gussetted corner braces • 6-leg design• All legs have adjustable feet • Hose reel/shelf combinations• 40B-Cabinet or 72B-Cabinet for fitting storage • Optional: Hose trough for measurement of hose • Calibrated to line up to Saw Table • Adjustable stop for standard length cuts• Built-in tape measureSpecifications: Rotary Reel Rack (TH7-6)• 16 Hose reel capacity • Compact design• Rotates for 1 man use• Center post bolts to floor in 4 places • Optional: Overhead craneSpecifications: Saw Table (TH7-7)• Calibrated to line up to Hose trough • Adjustable feet• Mounts to 6-foot benchSpecifications: 3 or 4 Reel Rack • Free standing 3 reel rack (TH7-8)• Bolts to floor• Optional: 4th reel capacity with wall mounts (TH7-8-F)• (2) 40B-Cabinet 40 openings - 4·1/2” x 4·1/2” x 12” in size • TH7-6-C—Optional overhead crane • T H7-5-HT—Optional 6’ measured hose trough with ad -justable hose stopPictured left is a complete on-site hose assembly workstation, the Parker Kart:The Parker Kart, TH7-4, is a portable all-in-one unit designed to hold a Minikrimp, Karrykrimp, Karrykrimp 2, or Parkrimp 1; a 332T -115V Cut-off Saw; 4 reels of hose; and has a 40 bin cabinet with 3 drawers for tools. The TH7-4 can be customized to fit your specific hose assembly needs. Contact Parker HPD or your Parker Hose distributor for details.Note: Part number TH7-4 does not include hose, fittings or equipment.Note: Part number and specifications of components for both workstations are listed on the following pages.HPD Hose Assembly WorkstationsHose Products Division has set up an agreement to allow Hose Products customers to purchase directly from our vendor, Safety Step.Safety Step’s contact information is:Safety Step Annette Cox 888-448-4237*********************See Safety Step contact information at the top of this pageSaw TableFeaturesThe Saw Table, specially designed for Parker 239 or 339 Hose Cut-Off Saw, attaches directly to the HoseFab Table.Part Number DescriptionTH7-715” wide table set up for Parker 239 or 339 Cut-Off Saw Table measurements:H eight - 18” Width - 28”Length - 14”3/4 Reel RackFeaturesCompact in its design, the standard version will hold 3 reels of hose. Optional 4th reel capacity designed with wall anchor mounts.P art Number DescriptionTH7-8 Upright 3 hose reel rackTH7-8-FO ptional extension with wall anchor for 4th reel Rack measurements:Height - 59” (82·1/2” with 4th reel option) Width - 27·3/4”Length - 27·1/2”HoseFab TableFeaturesHeavy duty constructed table for mounting Minikrimp, Karrykrimp, Karrykrimp 2, or Parkrimp 1. HoseFab Table is available in 3 versions to meet your require-ments. Options include two 40B-Cabinets or 72B-Cabinets for fitting storage.Part Number Description TH7-5-R 6’ table with 2 hose reels TH7-5-S 6’ table with 2 bottom shelves TH7-5-C 6’ table with 1 hose reel and 1 bottom shelf TH7-5-HT O ptional 6’ measured hose trough with adjustable hose stop 40B-Cabinet 40 openings - 4·1/2” x 4·1/2” x 12” in size 72B-Cabinet 72 openings - 4·1/2” x 4·1/2” x 12” in size Table measurements: Height - 31-3/4” Width - 29”Length - 72”Rotary Reel RackFeatures16 Hose reel capacity that fits in a compact area. Supplied with heavy duty casters which allow for ease of turning, even when fully loaded. Optional overhead crane available.Part Number DescriptionTH7-6 16 hose reel system, with rotating base TH7-6-C Optional overhead craneRack measurements:Height - 104” (120” with optional overhead crane) Width - 67”Length - 67”See Safety Step contact information on page D-26See Safety Step contact information on page D-26See Safety Step contact information on page D-26See Safety Step contact information on page D-26Parker Kart Part No. TH7-4Parker Kart organizes and stores all your necessary Parker hoses, fittings, power and hand tools - everything you need to make fast hose assemblies on site. As a valued addition to any facility, Parker Kart will save on downtime and labor costs, as well as eliminate errors in cutting and fitting attachment. With Parker Kart, you’ll always have the materials you need, right when and where you need them.• Easy one-man movement• Eight-inch urethane casters with brakes• Forklift carry tubes• Electric receptable with cord• Fitting bins and drawers• Large tool drawer• Four hose reel holders• Choice of Parker crimping equipment• Optional accessories availableParker Kart can be customized to fit specific hose assem-bly needs. Parker Kart does not include hose, fittings orequipment.Fitting Stock Bins72B-Cabinet36” wide, 43” high, 12” deep, with 72 openings each 4-1/2”x 4-1/2” x 12”, heavy duty steel, all welded construction.Product bin labels are available.Hose Stock BinsHR6-Hose-BinRugged metal cabinet for stocking coils of Parker hose 36”wide, 28” high, 20” deep, with upright separators to provide6 compartments varying in width from 4” to 8”.Provides suitable base on which to place the fittings stockbin (top measures 36” x 20”, bottom of fittings bin measures36” x 12”.)Yellow with black “Parker Hose” lettering.See Safety Step contact information on page D-26。

品牌型号P/N爱默生 EMERSON DeltaV KJ1501X1-BA212P0667X032爱默生 EMERSON DeltaV KJ1501X1-BB112P0678X022 爱默生 EMERSON DeltaV KJ1501X1-BC112P2186X012爱默生 EMERSON DeltaV KJ1501X1-BC212P2186X042爱默生 EMERSON DeltaV KJ1501X1-BC312P3935X022爱默生 EMERSON DeltaV KJ1501X1-BK112P1442X052爱默生 EMERSON DeltaV KJ1502X1-BA255P0518X032爱默生 EMERSON DeltaV KJ1611X1-EF1爱默生 EMERSON DeltaV KJ1700X1-BA112P1710X012 爱默生 EMERSON DeltaV KJ2002X1-BA112P1442X032爱默生 EMERSON DeltaV KJ2002X1-CA112P1509X092爱默生 EMERSON DeltaV KJ2003X1-BA212P2093X072爱默生 EMERSON DeltaV KJ2101X1-BA112P2690X012爱默生 EMERSON DeltaV KJ2101X1-CA112P2702X012爱默生 EMERSON DeltaV KJ3001X1-BA112P0549X112爱默生 EMERSON DeltaV KJ3001X1-BB112P0550X112爱默生 EMERSON DeltaV KJ3001X1-BC112P0551X132爱默生 EMERSON DeltaV KJ3001X1-BD112P0552X132爱默生 EMERSON DeltaV KJ3001X1-BG112P0557X142爱默生 EMERSON DeltaV KJ3001X1-BH112P0558X152爱默生 EMERSON DeltaV KJ3001X1-BJ112P0555X152爱默生 EMERSON DeltaV KJ3001X1-BJ112P0555X122爱默生 EMERSON DeltaV KJ3001X1-BK112P0556X0132爱默生 EMERSON DeltaV KJ3001X1-CA112P1980X062爱默生 EMERSON DeltaV KJ3001X1-CB112P1985X032爱默生 EMERSON DeltaV KJ3002X1-BA112P0680X122爱默生 EMERSON DeltaV KJ3002X1-BB112P0683X072爱默生 EMERSON DeltaV KJ3002X1-BC112P0681X062爱默生 EMERSON DeltaV KJ3002X1-BD112P1033X052爱默生 EMERSON DeltaV KJ3002X1-BE112P0682X042爱默生 EMERSON DeltaV KJ3002X1-BF112P1732X072爱默生 EMERSON DeltaV KJ3002X1-BG212P1731X032爱默生 EMERSON DeltaV KJ3003X1-EA112P0921X032爱默生 EMERSON DeltaV KJ3004X1-BA112P1064X122爱默生 EMERSON DeltaV KJ3005X1-BA112P2047X022爱默生 EMERSON DeltaV KJ3005X1-BA112P2047X062爱默生 EMERSON DeltaV KJ3007X1-BA112P2062X072爱默生 EMERSON DeltaV KJ3007X1-EA112P2413X032爱默生 EMERSON DeltaV KJ3201X1-BA112P2535X032爱默生 EMERSON DeltaV KJ3201X1-BJ112P0557X162爱默生 EMERSON DeltaV KJ3203X1-BA112P3270X032爱默生 EMERSON DeltaV KJ3221X1-BA112P2531X062爱默生 EMERSON DeltaV KJ3222X1-BA112P2532X072爱默生 EMERSON DeltaV KJ3241X1-BA112P0914X062爱默生 EMERSON DeltaV KJ3242X1-BA112P2471X022爱默生 EMERSON DeltaV KJ4001X1-BA1爱默生 EMERSON DeltaV KJ4001X1-BA212P1562X022爱默生 EMERSON DeltaV KJ4001X1-BE1爱默生 EMERSON DeltaV KJ4001X1-CA112P0623X022爱默生 EMERSON DeltaV KJ4001X1-CB112P0625X052爱默生 EMERSON DeltaV KJ4001X1-CC112P0733X032爱默生 EMERSON DeltaV KJ4001X1-CJ112P1902X012爱默生 EMERSON DeltaV KJ4001X1-DG112P1298X012爱默生 EMERSON DeltaV KJ4001X1-EA112P0733X022爱默生 EMERSON DeltaV KJ4001X1-GA112P0830X022爱默生 EMERSON DeltaV KJ4001X1-GG112P1812X022爱默生 EMERSON DeltaV KJ4001X1-HA112P0949X022爱默生 EMERSON DeltaV KJ4002X1-BA112P1727X042爱默生 EMERSON DeltaV KJ4002X1-BB112P1728X042爱默生 EMERSON DeltaV KJ4002X1-BF22P3866X012爱默生 EMERSON DeltaV KJ4010X1-BF112P0831X042爱默生 EMERSON DeltaV kJ4010X1-BG112P0830X042爱默生 EMERSON DeltaV KJ4110X1-BA112P1867X012爱默生 EMERSON DeltaV KJ4110X1-BC112P1869X012爱默生 EMERSON DeltaV VE300412P1509X092爱默生 EMERSON DeltaV VE300512P2093X072爱默生 EMERSON DeltaV VE3051CO12P1562X012爱默生 EMERSON DeltaV VE4001S2T112P0549X112爱默生 EMERSON DeltaV VE4001S2T212P0550X142爱默生 EMERSON DeltaV VE4001S2T2B212P2535X042爱默生 EMERSON DeltaV VE4001S2T2B412P1980X042爱默生 EMERSON DeltaV VE4001S3T1B112P0551X132爱默生 EMERSON DeltaV VE4002S1T112P0557X152爱默生 EMERSON DeltaV VE4002S1T2B212P0555X122爱默生 EMERSON DeltaV VE4002S1T2B212P0555X122爱默生 EMERSON DeltaV VE4002S1T2B512P1985X032爱默生 EMERSON DeltaV VE4002S2T112P0558X152爱默生 EMERSON DeltaV VE4002S2T212P0556X142爱默生 EMERSON DeltaV VE4003S1B212P0681X072爱默生 EMERSON DeltaV VE4003S212P0680X072爱默生 EMERSON DeltaV VE4003S2B112P2532X092爱默生 EMERSON DeltaV VE4003S5B112P1731X032爱默生 EMERSON DeltaV VE4003S6B112P1732X012爱默生 EMERSON DeltaV VE4005S1B2爱默生 EMERSON DeltaV VE4005S2B212P0682X042爱默生 EMERSON DeltaV VE400712P1064X102爱默生 EMERSON DeltaV VE400912P0914X062爱默生 EMERSON DeltaV VE4010B1爱默生 EMERSON DeltaV VE401412P2062X082爱默生 EMERSON DeltaV VE4017PO12P2471X032爱默生 EMERSON DeltaV VE4050S2K1C012P0818X022爱默生 EMERSON DeltaV VE4050S2K1C112P0818X032爱默生 EMERSON DeltaV VE4055S1C012P1727X052爱默生 EMERSON DeltaV VE4055S2C012P1728X052爱默生 EMERSON DeltaV VE405612P2702X022爱默生 EMERSON DeltaV VE500112P0677X062 爱默生 EMERSON DeltaV VE500355P0518X042爱默生 EMERSON DeltaV VE500812P2186X032爱默生 EMERSON DeltaV VE600612P1710X012 爱默生 EMERSON DeltaV VE6101参数System Power Supply(AC/DC)System Passthrough Power Supply 12/12VDC(DC/DC) System Dual DC Power Supply (DC/DC)System Dual DC Power Supply (DC/DC)System Power Supply(DC/DC)ControllerBULK AC TO 24 VDC POWER SUPPLYController MODULEMedia ConverterM3 ControllerM5+ ControllerMD ControllerPROVOX M3+ CONT CARPROVOX M3 CONT CARDI, 32-Channel, 24 VDC, Isolated CardDI,24 VDC,Dry Contact CardDI,(8 CH)120 VAC,lsolatdDISCRETE IN,120 VAC,Dry ContactDO, 8-Channel,24 VDC, Isolated CardDO,（8-CH）120/230 VAC IsolatedDO, (8-Ch), 24 VDC, High Side CardDO, 8-Ch, 24 VDC, High Side Card,DO, 8-Channel, 120/230 VAC, High SideDI,32 CH,24 VDC，Dry ContactDO, 32-Channel, 24 VDC, High-SideAnalog Input, 8 Channel, 4-20mA, HART Card ANALOG OUTPUT, 4-20mAAnalog Input Module Final Assy, 4-20mA,ANALOG INPUT 1-5 VDCAnalog Output, 8-Channel, 4-20mA, HART Card RTD,ohms 12VDC,160mAThermocouple, MV CardSerial Interface Terminal BlockFieldbus H1ASi Actuator SensorASi Actuator SensorPROFIBUS DP CARDPROFIBUS DP Terminal BlockDI,8-Channel, 24 VDC, Dry Contact CardDO, 8-Channel, 24 VDC, High SideDI,32 CH,24 VDC，Dry Contact,Series 2ANALOG OUTPUT, 4-20mA, HART, SERIES 2 ANALOG INPUT, 8 Ch, 4-20mA, HART, SERIES 2Serial Interface Card New ModelFieldbus H1, Series 2CONTROLLER M3 2SLOT CARRIERPower Controller 2 Wide Carrier8 Wide I/O Carrier with Shield BarI/O Terminal BlockFused I/O Terminal Block4 Wire TX Terminal Block32 Channel Terminal BlockFUSED TERM PWBTERM BLOCK 4 WIRELocal Bus Right Extender CableThermocouple Terminal BlockLocal Bus Extender CableLeft 8 Wide Vertical CarrierRight 8 Wide Vertical CarrierBottom Extender CableLocal Bus Left ExtensionLocal Bus Right ExtensionINTRINSICALLY SAFE DO 4 CH SOLENOID DRIVER IIC DI 16 CH FIELD TERMINALM5+ ControllerMD ControllerPower Controller 2 Wide CarrierDI, 32-Channel,24 VDC, Isolated CardDI 24 VDC, Dry Contact CardDI, 8-Channel, 24 VDC, Dry Contact CardDI,32-Channel,24 VDC, Dry Contact CardDI 120VAC ISOLATEDDO, 8-Channel, 24 VDC, Isolated CardDO, 8-Ch, 24 VDC, High Side CardDO, 8-Ch, 24 VDC, High Side Card, CARDDO, 32-Channel,24 VDC, High-Side CardDO, 8-Ch, 120/230 VAC IsolatedDO,8-Channel, 120/230 VAC, High SideAnalog Input Module Final Assy, 4-20mA, CardAnalog Input, 8 Channel, 4-21mA, HART CardANALOG INPUT, 8 Ch, 4-20mA, HART, SERIES 2 Thermocouple, MVRTD CardANALOG OUTPUT MODULEAnalog Output, 8-Channel, 4-20mA, HARTFIELDBUS H1 CARDSerial Interface CardDI,16 CH FIELD TERMINALPROFIBUS DP CardFieldbus H1 Series 28-WIDE I/O I/F CARRIER8 Wide I/O Carrier with Shield BarLeft 8 Wide Vertical Carrier CardRight 8 Wide Vertical Carrier Card PROVOX I/O InterfaceAC/DC SYSTEM POWER SUPPLY BULK AC TO，24 VDC POWER SUPPLY System Dual DC Power Supply (DC/DC) Media ConverterCARRIER BLANK CAP。

I/A’s系统维护手册（工程师手册）编制：何卫兵上海福克斯波罗有限公司二零零二年元月第一章系统概述本手册为上海福克斯波罗有限公司DCS系统I/A维护手册，并作为I/A’s 培训手册的补充。

用户可以结合两本手册来进行系统操作、软件组态及系统维护。

必要时还应参考随机的原版资料及福克斯波罗公司提供的中文培训手册。

本手册针对福克斯波罗制造的I/A’S，采用Solaris 2.5.1操作系统和I/A’s 6.2.1版本应用软件。

整个系统为一个节点，在冗余的节点总线DNBI上挂有：●三台工程师站AW5101、AW5102、AW5103该站作为工程师站，内置256M内存及8GB硬盘，AW5102外挂一台喷墨打印机（电缆长度15米），AW5103配有和MIS系统通讯用的第二以太网卡。

该工作站安放在工程师站内，与I/A机柜（位于电子间）之间的通讯电缆长度为30米。

●四台操作员站WP5101、WP5103、WP5104、WP5105该站内置128M内存及8GB硬盘，并各配有一个21”的CRT。

该工作站安放在主控室内与I/A机柜（位于电子间）之间的通讯电缆长度为30米。

●一台操作员站WP5102该站作为大屏幕操作站，内置128M内存及8GB硬盘，除配有一个21”的CRT外。

还配有一台用于显示大屏幕的以太网卡。

该工作站安放在主控室内，与I/A机柜（位于电子间）之间的通讯电缆长度为30米。

●十一对容错台控制处理站CP4001、CP4002、CP4003、CP4004、CP4005、CP4006、CP4007、CP4008、CP4009、CP4010、CP4011此容错型控制处理站CP40BFT，用于实现DCS系统的数据采集及控制。

该控制处理器安放在电子间内。

现场由十八个装有现场总线组件FBM的现场机柜、十个安装DCS系统辅助装置（包括冗余的24VDC电源、交流继电器、直流继电器、SIMENSE交流接触器、以及相应的I/O端子）的继电器柜、一个DCS系统220VAC配电柜共同构成。

六、FOXBORO一体化远程I/O说明1、FOXBORO一体化远程I/O说明在硬件上，由于FOXBORO I/A系统的所有I/O组件FBM都是智能的，为全密闭的设计，采用了低功耗的CMOS元件，其工作温度可达到-20℃至+70℃，能够承受电厂中恶劣的现场环境，具备了固有的远程I/O能力。

上海福克斯波罗有限公司所有的I/O组件既可以用作本地I/O使用，也可以用作远程I/O使用。

上海福克斯波罗公司采用一体化远程I/O的布置方式可以有效地减少安装工程的工作量，降低电缆的成本费用，减小电子设备间的面积；提高系统的抗干扰能力和火灾防护能力。

FOXBORO I/A系统所有的组件都是智能的，具有自诊断能力，其中一些组件可执行就地程序。

具有输入/输出的数字量组件可执行梯形逻辑。

这不仅改善了梯形逻辑执行的速度，对一些重要的设备来说，在两个控制器同时故障时仍可继续安全地运行，并且显著地减少了用户的现场接线成本。

国内如江苏谏壁电厂、通州美亚热电厂等电力工程都成功地采用了FOXBORO一体化远程I/O的布置方式，取得了良好的效果。

在软件上，I/A系统的实时数据库是分散分布的全局实时数据库，采用Foxboro公司独特的目标管理技术。

在I/A网络上的任何一个处理机（无论是AW70、WP70或者是FCP270），都可以作为一个服务器为网络上的其它处理机服务，同时它也可以作为一个客户机去访问网络上任何一个处理机的数据。

在I/A系统中，访问任何一个数据只需要知道该数据的地址，而不会受到其物理位置的限制。

这种分散分布的数据库结构，避免了某一个关键设备可能出现的瓶颈效应，同时把任何一个设备故障所造成的影响限制在最小的范围内，提供了数据访问最大的灵活性和安全性，保证了一体化远程I/O数据传输安全可靠。

远程I/O柜的供电为两路220VAC，考虑到可靠性的要求，通常由DCS的配电柜送出。

远程I/O 柜也可以就近接受220Vac的电源。

远程I/O柜的接地，采用就近接入电厂的电气公共接地网。

3400V胶机胶缸部件143653983064111801982000106340过滤105622感温器108907超温保护器249800螺丝3383682881549834149834369822129834042881481054121055901876391056199834149834149834049820501614243400V胶机壳体1056182883071824932344341436522254562254551055932254542881602344332882221056142309082308979830053400V 分歧座120324983414288023982096整个滤网105432 2745699412209402813100V胶机胶缸部件143653983064111800982000106339过滤105621感温器108907超温保护器249800螺丝3383682881549834149834369822129834042881481054111055891876261056199834149834149834049820501614243100V胶机壳体1056171448691824932344351436522254562254551055932254542881602344332882221056142309082308979830053100V 分歧座120324983414288023982096整个滤网105432 2745699412209402813000V通用过滤系统（105432）2745782745789411722745139817473000Vista TC 通用电气控制系统234423U 型弹簧锁母操作面板232682开关225451225450297706 含第4、5接头185092控制板248043螺丝9829712325403000Vista TC 活塞泵（161424）1.164601泵维修组件（包含图中1-11项及高温润滑油211228）2.166880 磁叉3.164606 泵换向执行机构4.120306 泵出口密封圈（包含白色和棕色密封圈）166880 164606ProBlue 胶机胶缸分歧座备件明细（P4、P7和P10）活塞泵活塞泵10283031064649 240VAC 1064650 400VAC 1017009 1017060 超温保护器1028321 连接管1017186 密封圈 94116111感温器1028320 感温器1028320P4&P7 1064651 P10 1064653P4 1025885 P7 1025885 P10 10178921017189泄压阀 1028308过滤网 1028305 P4 1051033 P7 1051034 P10 10510351028304 活塞泵维修组件（含高温润滑油） 1028307 ProBlue 胶机活塞泵控制机构（含电磁阀） 磁叉、执行机构的编号和3000系列胶机相同CPU板1028325操作面板P4&P7 1028326P10 1028327挡板1017223诺信喉管1. 按照使用性分防水型喉管、标准喉管和高弹性喉管2. 按喉管内径有9/16”和5/8” 两种3. 按照喉管本身使用的感温器分为RTD 、Feco 和PT100的喉管型号：5/16” , RTD 喉管用于自动喷枪喉管针脚定义（连接胶机一端）1 和 2： 胶枪加热器 3 和 5： 胶枪感温器 4 和 6 : 胶管加热器 5 和 8： 胶管感温器喉管的不正确安装方式：诺信喉管及胶枪胶机连接接头为了保证接头及胶枪、胶管和胶机的螺纹不被损坏，拆装时个部件必须在加热状态，连接胶机和胶枪一端时，先用手慢慢将接头拧入胶机分歧座或胶枪座的螺纹，直到密封圈进入到分歧座或胶枪上的槽内，然后调整好角度并用扳手将锁紧锁母锁死，连接喉管时同样用手拿住喉管一端的锁母，慢慢于接头连接，待全部扣戴正，且用手劲拧不动时，用两把扳手锁紧。

T9-I.T9-L1.T9-2LFrom...American Hakko Products, Inc.28920 N. Avenue Williams.Valencia, CA 91355 Tel: (661) 294-0090 Fax: (661) 294-0096 AHP14 Rev 2000-01For pricing information, please contact your local American Hakko representative or our customer service department at (661) 294-0090.American Hakko Products, Inc.P R O D U C T B U L L E T I NBulletin No: PB260Issue Date: November 5, 2007 Product:FM-203 Dual Port Soldering StationPart No:FM203-01 FM203-DPComments:The Hakko FM-203 is a Dual Port high performance soldering station. Even when soldering lead-free solders the high performance allows loweroperating temperatures. The soldering station can operate any of the following hand pieces, FM-2027 Soldering Iron, FM-2022 Parallel Remover (SMD tweezer), FM-2023 Mini Parallel Remover (SMD mini tweezer), FM-2024 Desoldering Module, and/or FM-2026 Nitrogen Soldering Iron. The soldering iron and desolder tool can be used in either or both ports and the tweezers are limited to one port with a soldering or desoldering iron in the other port.The station features a programmable sleep mode of 0-29 minutes or auto-power shut off at 30 minutes. Sleep mode, auto power shut off and tip temperature can be programmed separately for each port. The sleep mode reduces the tip temperature to approximately 200ºC (400ºF) after the programmed time (0-29 minutes). The lower tip temperature will reduce oxidation of the tip and improve the tip performance. When in sleep mode the tip will quickly return to temperature after the iron is removed from the holder.When utilizing the FM-2027 Soldering Iron the station uses the T15 series composite tip. The composite tip is a soldering tip in which a heating element and sensor are integrated with ceramic. Despite its highly compact design, the tip offers superior thermal response and greatly improved thermal recovery. T15 series tips are available in a wide variety of tip shapes and can also be used with the Hakko FM-203, FP-102 and FM-202 soldering stations. Any tip can be operated at temperatures 200 - 450ºC (400 - 840ºF). The station includes a card lock system to lock the preset soldering temperature. With the card removed operators can not adjust the working temperature.The FM-2022 uses T16 tips, The FM-2023 uses T9 tips, The FM-2024 uses N3 nozzles and The FM-2026 uses T17 tips.Documentation Provided By HMC ElectronicsFrom...American Hakko Products, Inc.28920 N. Avenue Williams.Valencia, CA 91355 Tel: (661) 294-0090 Fax: (661) 294-0096 AHP14 Rev 2000-01Specifications:FM-203 Soldering Station Power Consumption 140W 120VTemperature Range 200 - 450ºC (400 - 840ºF) Temperature Stability ±5ºC (±9ºF) Temperature Accuracy±15ºC (±27ºF)Soldering Iron (No.FM-2027) Power Consumption 70W (24V) Tip to Ground Resistance < 2Ω Tip to Ground Potential < 2mV Cord Length1.2m (47 in.) Total Length (w/o Cord)with 2.4D soldering tip attached 188mm (7.4 in.) Weight (w/o Cord)with 2.4D soldering tip attached30g (1.0 oz.)StationOutput 24V Dimensions 120(W) x 120(H) x 190(D)mm (4.7 x 4.7 x 7.5 in.) Weight (w/o cord)2.7kg (5.9 lb.) Contents:Part No.NameFM203-01 FM203-DPN/AFM-203 soldering station1 1 FM2027-02 Connector 12B2387 Power cord 1 1 B2972 Control card 1 1 B3219 Sleeve assembly, Green, anti-bacterial 1 1 B3216 Sleeve assembly, Yellow, anti-bacterial 0 1 B2300 Heat-resistant pad 1 2 FH200-01Iron Holder, Sleep, w/ 599B12B3253 Connecting cable 1 2 B2756 Tip tray1 1 N/A Instruction manual1 1The FM2023-DP includes two FM-2027 connectors and sleep holders. Tips not included.Documentation Provided By HMC ElectronicsFrom...American Hakko Products, Inc.28920 N. Avenue Williams.Valencia, CA 91355 Tel: (661) 294-0090 Fax: (661) 294-0096 AHP14 Rev 2000-01Accessories/Replacement Parts:Part No. NameSpecificationFM2027-01 HAKKO FM-2027 w/ Yellow Sleeve Assembly Does not include tip or holder B3216 Sleeve Assembly Yellow (Lock-type, Antibacterial) B3217 Sleeve Assembly Orange (Lock-type, Antibacterial) B3218 Sleeve Assembly Blue (Lock-type, Antibacterial) B3219Sleeve Assembly Green (Lock-type, Antibacterial)A1536 Cleaning sponge GreenFM2022-05 Conversion kit FM-2022 Parallel Remover with sleep holder and cable. Tips not included. FM2023-05 Conversion kit FM-2023 Mini Parallel Remover with sleep holder and cable. Tips included. FM2024-21 Conversion kit/120 V FM-2024 Desoldering Module with sleep holder and cable. Nozzle not included. FM2026-06 Conversion kit FM-2026 Nitrogen Iron with sleep holder and cable. Tips not included.FM2027-03Conversion kitFM-2027 Soldering Iron with sleep holder and cable. Tips not included.Tips and Nozzles:See PB258 for T15 tip list for HAKKO FM-2027Tips for HAKKO FM-2022Part No. Part Name SpecificationsT16-1001 Tip / CHIP 0.5I T16-1002 Tip / CHIP 0.5C T16-1003 Tip / CHIP 1L T16-1004 Tip / CHIP 2L T16-1005 Tip / SOP 6L T16-1006 Tip / SOP 8L T16-1007 Tip / SOP 10L T16-1008 Tip / SOP 13L T16-1009 Tip / SOP 16L T16-1010 Tip / SOP 20L T16-1011 Tip / SOP 25L T16-1012 Tip / SOP 18L T16-1013Tip / CHIP 3LDocumentation Provided By HMC ElectronicsFrom...American Hakko Products, Inc.28920 N. Avenue Williams.Valencia, CA 91355 Tel: (661) 294-0090 Fax: (661) 294-0096 AHP14 Rev 2000-01Tips for HAKKO FM-2023Part No. Part Name SpecificationsT9-I Tip / CHIP I T9-L1 Tip / CHIP 1L T9-L2Tip / CHIP 2LNozzles for HAKKO FM-2024Part No. Part NameSpecificationsN3-06 Nozzle / 0.6mm (0.02 in.) N3-08 Nozzle / 0.8mm (0.03 in.) N3-10 Nozzle / 1.0mm (0.04 in.) N3-13 Nozzle / 1.3mm (0.05 in.) N3-16 Nozzle / 1.6mm (0.06 in.) N3-20 Nozzle / 2.0mm (0.08 in.) N3-23 Nozzle / 2.3mm (0.10 in.)N3-L10 Long Nozzle / 1.0mm (0.04 in.)Tips for HAKKO FM-2026Part No. Part NameSpecificationsT17-B2 SHAPE-0.5B Conical T17-BC1 SHAPE-1BC Bevel T17-BC2 SHAPE-2BC Bevel T17-BC3 SHAPE-3BC BevelT17-BCF1 SHAPE-1BC Bevel Tinned on the soldering surface onlyT17-BCF2 SHAPE-2BC Bevel Tinned on the soldering surface onlyT17-BCF3 SHAPE-3BC BevelTinned on the soldering surface only T17-BL SHAPE-B Long Shape Conical T17-D08 SHAPE-0.8D Chisel T17-D16 SHAPE-1.6D Chisel T17-D24 SHAPE-2.4D Chisel T17-J02 SHAPE-0.2J Bent T17-KF SHAPE-KF Knife T17-KR SHAPE-KR Knife T17-KUSHAPE-KU KnifeAvailable:November 6, 2007Documentation Provided By HMC ElectronicsT9-I.T9-L1.T9-2L。