当前位置：文档之家 › IR-4中文资料

IR-4中文资料

  • 格式：pdf
  • 大小：178.46 KB
  • 文档页数：4

InductorsEpoxy Conformal Coated Uniform Roll CoatedIRVishay Dale For technical questions contact magnetics@Document Number: 3405428Revision: 31-Jan-06ELECTRICAL SPECIFICATIONSInductance Tolerance: ± 1 %, ± 3 %, ± 5 %, ± 10 %, ± 20 %Other tolerances available on requestInsulation Resistance: 1000 Megohm minimum per MIL-STD-202, Method 302, Test Condition BDielectric Strength: 1000 VAC per MIL-STD-202, Method 301MATERIAL SPECIFICATIONSCoating: Epoxy-uniform roll coated Lead: Tinned copperFEATURES•Flame-retardant coating •Color band identification•Excellent environmental characteristics•Uniform coating is excellent for automatic insertion•Comparable in quality to molded chokes at a lower price •Epoxy coating is more durable than lacquer coated models, yet is priced comparablyMECHANICAL SPECIFICATIONST erminal Strenght: 5 pounds pull per M IL-STD-202,Method 211, Test Condition AWeight:IR-2 = 0.30 grams maximumIR-4 = 0.65 gram maximumTEST EQUIPMENT*•H/P 4342A Q-Meter•Measurements Corporation Megacycle Meter, Model 59•Whearstone bridge* Test procedures per MIL-PRF-15305ENVIRONMENTAL PERFORMANCETEST CONDITIONS SPECIFICATIONS Barometric Pressure Test Condition C MIL-STD-202, Method 105Thermal ShockTest Condition A-1MIL-STD-202, Method 107Flammability-MIL-STD-202, Method 111Overload-MIL-PRF-15305LowTemperature -MIL-PRF-15305Resistance to Soldering Heat Test Condition A MIL-STD-202, Method 210Resistance to Solvents-MIL-STD-202, Method 215MAXIMUM TEMPERATURE RISEIR-2OPERATING TEMPERATURE RANGE0.1 µH to 1.0 µH = + 35 °C at + 90 °C ambient - 55 °C to 125 °C 1.2 µH to 27 µH = + 15 °C at + 90 °C ambient - 55 °C to 105 °C 33 µH to 1000 µH = + 15 °C at + 90 °C ambient- 55 °C to 105 °CIR-40.15 µH to 4.7 µH = + 35 °C at + 90 °C ambient - 55 °C to 125 °C 5.6 µH to 33 µH = + 15 °C at + 90 °C ambient - 55 °C to 105 °C 36 µH to 240 µH = + 15 °C at + 90 °C ambient - 55 °C to 105 °C 270 µH to 1800 µH = + 35 °C at + 90 °C ambient- 55 °C to 125 °CIRInductors, Epoxy Conformal Coated, Uniform Roll CoatedVishay DaleDocument Number: 34054For technical questions contact magnetics@Revision: 31-Jan-0629* Measured with full length lead.** Rated DC Current based on maximum temperature rise as shown in table.STANDARD ELECTRICAL SPECIFICATIONSMODELIND.(µH)TOL.Q MIN.TEST FREQ.L & Q (MHz)SELF-RESONANT*FREQ MIN.(MHz)DCR MAX.(Ohms)RATED DC**CURRENT (mA)IR-20.10± 10 %4025.0680.00.081350P H E N O L I C C O R EIR-20.12± 10 %4025.0640.00.091270IR-20.15± 10 %3825.0600.00.101200IR-20.18± 10 %3525.0550.00.121105IR-20.22± 10 %3325.0510.00.141025IR-20.27± 10 %3325.0430.00.16960IR-20.33± 10 %3025.0410.00.22815IR-20.39± 10 %3025.0365.00.30700IR-20.47± 10 %3025.0330.00.35650IR-20.56± 10 %3025.0300.00.50545IR-20.68± 10 %2825.0275.00.60495IR-20.82± 10 %2825.0250.00.85415IR-2 1.0± 10 %2525.0230.0 1.00385IR-2 1.2± 10 %257.9150.00.18590I R O N C O R E IR-2 1.5± 10 %287.9140.00.22535IR-2 1.8± 10 %307.9125.00.30455IR-2 2.2± 10 %307.9115.00.40395IR-2 2.7± 10 %377.9100.00.55355IR-2 3.3± 10 %457.990.00.85270IR-2 3.9± 10 %457.980.0 1.0250IR-2 4.7± 10 %457.975.0 1.2230IR-2 5.6± 10 %507.965.0 1.8185IR-2 6.8± 10 %507.960.0 2.0175IR-28.2± 10 %557.955.0 2.7155IR-210.0± 10 %557.950.0 3.7130IR-212.0± 10 %45 2.540.0 2.7155IR-215.0± 10 %40 2.535.0 2.8150IR-218.0± 10 %50 2.530.0 3.1145IR-222.0± 10 %50 2.525.0 3.3140IR-227.0± 10 %50 2.520.0 3.5135IR-233.0± 10 %45 2.524.0 3.4130F E R R I T E C O R E IR-239.0± 10 %45 2.522.0 3.6125IR-247.0± 10 %45 2.520.0 4.5110IR-256.0± 10 %45 2.518.0 5.7100IR-268.0± 10 %50 2.515.0 6.792IR-282.0± 10 %50 2.514.07.388IR-2100.0± 10 %50 2.513.08.084IR-2120.0± 10 %300.7912.013.066IR-2150.0± 10 %300.7911.015.061IR-2180.0± 10 %300.7910.017.057IR-2220.0± 10 %300.799.021.052IR-2270.0± 10 %300.798.025.047IR-2330.0± 10 %300.797.028.045IR-2390.0± 10 %300.79 6.535.040IR-2470.0± 10 %300.79 6.042.036IR-2560.0± 10 %300.79 5.046.035IR-2680.0± 10 %300.79 4.060.030IR-2820.0± 10 %300.79 3.865.029IR-21000.0± 10 %300.79 3.472.028IR-40.15± 20 %5025.0525.00.032450P H E N O L I C C O R E IR-40.22± 20 %5025.0450.00.0551810IR-40.33± 20 %4525.0360.00.091400IR-40.47± 20 %4525.0310.00.121225IR-40.56± 10 %5025.0280.00.1351150IR-40.68± 10 %5025.0250.00.151100IR-40.82± 10 %5025.0220.00.22900IR-4 1.0± 10 %5025.0200.00.29785IR-4 1.2± 10 %337.9180.00.42650IR-4 1.5± 10 %337.9160.00.50600IR-4 1.8± 10 %337.9150.00.65525IR-4 2.2± 10 %337.9135.00.95435IR-4 2.7± 10 %337.9120.0 1.20385IR-4 3.3± 10 %337.9110.0 2.00300IR-4 3.9± 10 %337.9100.0 2.30280IR-4 4.7± 10 %337.990.02.60260IRVishay DaleInductors, Epoxy Conformal Coated, Uniform Roll Coated For technical questions contact magnetics@Document Number: 3405430Revision: 31-Jan-06* Measured with full length lead.** Rated DC Current based on maximum temperature rise as shown in table.STANDARD ELECTRICAL SPECIFICATIONSMODELIND.(µH)TOL.Q MIN.TEST FREQ.L & Q (MHz)SELF-RESONANT*FREQ MIN.(MHz)DCR MAX.(Ohms)RATED DC**CURRENT (mA)IR-4 5.6± 10 %457.960.032.0495I R O N C O R EIR-4 6.8± 10 %507.955.00.50395IR-48.2± 10 %507.950.00.60360IR-410.0± 10 %557.945.00.90290IR-412.0± 10 %65 2.542.0 1.10265IR-415.0± 10 %65 2.540.0 1.40240IR-418.0± 10 %75 2.534.0 2.25185IR-422.0± 10 %75 2.530.0 2.50175IR-427.0± 10 %60 2.525.0 2.60170IR-433.0± 10 %65 2.519.0 3.0165IR-436.0± 5 %60 2.515.5 2.50180IR-439.0± 5 %60 2.514.5 2.60176IR-443.0± 5 %60 2.513.7 2.70172IR-447.0± 5 %55 2.513.0 2.75170IR-451.0± 5 %55 2.512.7 2.85167IR-456.0± 5 %55 2.512.0 3.0164IR-462.0± 5 %55 2.511.5 3.15160IR-468.0± 5 %55 2.511.0 3.30156IR-475.0± 5 %55 2.510.5 3.70147IR-482.0± 5 %50 2.510.3 3.90143IR-491.0± 5 %50 2.510.0 4.30136IR-4100.0± 5 %50 2.59.5 4.50133IR-4110.0± 5 %600.798.9 4.90128IR-4120.0± 5 %650.798.7 5.20124IR-4130.0± 5 %650.798.5 5.45121IR-4150.0± 5 %650.798.0 6.05114IR-4160.0± 5 %650.797.5 6.40111IR-4180.0± 5 %650.797.0 6.75108IR-4200.0± 5 %650.79 6.57.10106IR-4220.0± 5 %650.79 6.27.45103IR-4240.0± 5 %650.79 5.97.80101IR-4270.0± 5 %650.79 5.711.0129IR-4300.0± 5 %650.79 5.411.5125IR-4330.0± 5 %650.79 5.112.0123IR-4360.0± 5 %650.79 4.815.5108IR-4390.0± 5 %650.79 4.516.3105IR-4430.0± 5 %650.79 4.217.1102IR-4470.0± 5 %650.79 3.917.9100IR-4510.0± 5 %650.79 3.718.898IR-4560.0± 5 %650.79 3.524.785IR-4620.0± 5 %650.79 3.325.983IR-4680.0± 5 %550.79 3.127.281IR-4750.0± 5 %550.79 2.928.679IR-4820.0± 5 %550.79 2.730.077IR-4910.0± 5 %550.79 2.531.576IR-41000.0± 5 %550.79 2.333.174IR-41100.0± 5 %300.25 2.143.564IR-41200.0± 5 %300.25 2.045.763IR-41300.0± 5 %300.25 1.949.061IR-41500.0± 5 %300.25 1.852.559IR-41600.0± 5 %300.25 1.754.058IR-41800.0± 5 %300.251.656.756DESCRIPTIONIR-210 µH± 10 %ERe2MODELINDUCTANCE VALUEINDUCTANCE TOLERANCEPACKAGE CODEJEDEC LEAD (Pb)-FREE STANDARDGLOBAL PART NUMBER INFORMATIONMODELPACKING CODEINDUCT ANCE VALUETOL.IR2ER1KDocument Number: 91000Revision: 18-Jul-081DisclaimerLegal Disclaimer NoticeVishayAll product specifications and data are subject to change without notice.Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay.The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.Product names and markings noted herein may be trademarks of their respective owners.元器件交易网。

合集下载

IRGP4086PBF;中文规格书,Datasheet资料

IRGP4086PBF;中文规格书,Datasheet资料

TJ = 25°C
tf
Fall time
td(on)
Turn-On delay time
tr
Rise time
— 65 —
— 30 —
IC = 25A, VCC = 196V
— 33 — ns RG = 10Ω, L=200μH, LS= 200nH
td(off) tf tst
EPULSE
Turn-Off delay time Fall time Shoot Through Blocking Time
2
/

240
VGE = 18V
200
VGE = 15V
VGE = 12V
160
VGE = 10V VGE = 8.0V
120
VGE = 6.0V
ICE (A)
80
40
0
0
4
8
12
16
VCE (V)
Fig 1. Typical Output Characteristics @ 25°C
––– 29 ––– ––– 65 ––– ––– 22 ––– — 36 — — 31 — — 112 —
S VCE = 25V, ICE = 25A nC VCE = 200V, IC = 25A, VGE = 15Ve
IC = 25A, VCC = 196V ns RG = 10Ω, L=200μH, LS= 200nH
Parameter Thermal Resistance Junction-to-Case-(each IGBT) d Case-to-Sink (flat, greased surface) Junction-to-Ambient (typical socket mount) d Weight
IR3553MTRPBF;中文规格书,Datasheet资料

IR3553MTRPBF;中文规格书,Datasheet资料

FEATURES∙ Peak efficiency up to 93.2% at 1.2V∙ Integrated driver, control MOSFET, synchronous MOSFET and Schottky diode ∙ Input voltage (VIN) operating range up to 15V ∙ Output voltage range from 0.25V up to 3.3V ∙ Output current capability of 40A DC ∙ Operation up to 1.0MHz∙ Integrated current sense amplifier ∙ VCC under voltage lockout ∙ Thermal flag∙ Body-Braking® load transient support ∙ Diode-emulation high efficiency mode∙ Compatible with 3.3V PWM logic and VCC tolerant ∙ Compliant with Intel DrMOS V4.0∙ PCB footprint compatible with IR3550 and IR3551 ∙ Efficient dual sided cooling∙ Small 4mm x 6mm x 0.9mm PQFN package ∙ Lead free RoHS compliant packageAPPLICATIONS∙ Voltage Regulators for CPUs, GPUs, and DDR memory arrays ∙ High current, low profile DC-DC convertersDESCRIPTIONThe IR3553 integrated PowIRstage® is a synchronous buck gate driver co-packed with a control MOSFET and a synchronous MOSFET with integrated Schottky diode. It is optimized internally for PCB layout, heat transfer and driver/MOSFET timing. Custom designed gate driver and MOSFET combination enables higher efficiency at lower output voltages required by cutting edge CPU, GPU and DDR memory designs.Up to 1.0MHz switching frequency enables high performance transient response, allowing miniaturization of output inductors, as well as input and output capacitors while maintaining industry leading efficiency. The IR3553’s superior efficiency enables smallest size and lower solution cost. The IR3553 PCB footprint is compatible with the IR3550 (60A) and the IR3551 (50A).Integrated current sense amplifier achieves superior current sense accuracy and signal to noise ratio vs. best-in-class controller based Inductor DCR sense methods. The IR3553 incorporates the Body- Braking® feature which enables reduction of output capacitors. Synchronous diode emulation mode in the IR3553 removes the zero-current detection burden from the PWM controller and increases system light-load efficiency.The IR3553 is optimized specifically for CPU core power delivery in server applications. The ability to meet the stringent requirements of the server market also makes the IR3553 ideally suited to powering GPU and DDR memory designs and other high current applications.PINOUT DIAGRAMFigure 3: IR3553 Pin Diagram, Top ViewORDERING INFORMATIONTYPICAL APPLICATION DIAGRAMIOUTVCC BBRK#REFINVOUTFigure 4: Application Circuit with Current Sense AmplifierTYPICAL APPLICATION DIAGRAM (CONTINUED)VCC BBRK#VOUTFigure 5: Application Circuit without Current Sense AmplifierFUNCTIONAL BLOCK DIAGRAMPHSFLT#REFINPWM VIN SWSW SW SW SWSW TGND BOOST IOUT VCCBBRK#GATEL CSIN+LGNDPGNDFigure 6: IR3553 Functional Block DiagramPIN DESCRIPTIONSABSOLUTE MAXIMUM RATINGSStresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications are not implied.Note:1. Maximum BOOST – SW = 8V.2. Maximum VIN – SW = 25V.3. All the maximum voltage ratings are referenced to PGND (Pins 12 and 13).Note:1. Thermal Resistance (θJA) is measured with the component mounted on a high effective thermal conductivity test board in free air.Refer to International Rectifier Application Note AN-994 for details.ELECTRICAL SPECIFICATIONSThe electrical characteristics involve the spread of values guaranteed within the recommended operating conditions. Typical values represent the median values, which are related to 25°C.RECOMMENDED OPERATING CONDITIONS FOR RELIABLE OPERATION WITH MARGINELECTRICAL CHARACTERISTICSNotes1. Guaranteed by design but not tested in production2.V IN=12V, V OUT=1.2V, ƒSW = 300kHz, L=210nH (0.2mΩ), VCC=6.8V, C IN=47uF x 4, C OUT =470uF x3, 400LFM airflow, no heat sink, 25°Cambient temperature, and 8-layer PCB of 3.7” (L) x 2.6” (W). PWM controller loss and inductor loss are not included.3. V IN=12V, V OUT=1.2V, ƒSW = 400kHz, L=150nH (0.29mΩ), VCC=7V, C IN=47uF x 4, C OUT =470uF x3, no airflow, no heat sink, 25°C ambienttemperature, and 8-layer PCB of 3.7” (L) x 2.6” (W). PWM controller loss and inductor loss are not included.TYPICAL OPERATING CHARACTERISTICSCircuit of Figure 32, V IN =12V, V OUT =1.2V, ƒSW = 400kHz, L=150nH (0.29m Ω), VCC=7V, T AMBIENT = 25°C, no heat sink, no air flow, 8-layer PCB board of 3.7” (L) x 2.6” (W), no PWM controller loss, no inductor loss, unless specified otherwise.TYPICAL OPERATING CHARACTERISTICS (CONTINUED)Circuit of Figure 32, V IN =12V, V OUT =1.2V, ƒSW = 400kHz, L=150nH (0.29m Ω), VCC=7V, T AMBIENT = 25°C, no heat sink, no air flow, 8-layer PCB board of 3.7” (L) x 2.6” (W), no PWM controller loss, no inductor loss, unless specified otherwise.Figure 13: Normalized Power Loss vs. VCC Voltage Figure 14: Power Loss vs. Output Inductor Figure 15: VCC Current vs. Switching FrequencyFigure 16: Switching Waveform, I OUT = 0AFigure 17: Switching Waveform, I OUT = 40AFigure 18: PWM to SW Delays, I OUT = 10APWM 2V/divSW 5V/div40ns/divPWM 5V/divSW 5V/divGATEL 10V/div400ns/divPWM 5V/divSW 5V/divGATEL 10V/div400ns/div分销商库存信息: IRIR3553MTRPBF。

IRF3205S中文资料

IRF3205S中文资料

国际整流器IR IRF3205S/LHEXFET® Power MOSFET*先进的加工技术Thermal Resistance*极低的导通阻抗V DSS = 55V*动态的dv/dt等级R DS(on) = 8.0mΩ*175°C运行温度I D = 110A*充分的雪崩等级TO-262 D2Pak IRF3205LIRF3205S描述来自国际镇流器公司先进的HEXFET R功率金属氧化物半导体场效应晶体管，利用先进的处理技术达到每个硅片极低的导通阻抗。

这样有益于结合高速的开关和可靠使MOSFETS大量地实用设备上，使设计师能够非常高效，可靠的应用在各个方面。

D2Pak表面封装的适合于小功率大面积小HEX-4。

它能够提供最大的功率输出和最可能小的导通阻抗在现有的贴片封装下。

D2Pak适合与大电流应用场合，是因为它有低的内部连接阻抗和具有2W的散热能力，是典型的贴片封装应用。

最大额定参数参数最大值单位I D @ T C = 25°C持续漏极电流，Vgs@10V110AI D @ T C =100°C持续漏极电流,Vgs@10V80AI DM脉冲漏极电流，390AP D @T C = 25°C功率消散200W线性额定降低因数 1.3W/°CV GS门极电压±20VI AR雪崩电流62AE AR重复雪崩能量20mJdv/dt二极管恢复峰值电压变化率 5.0V/nST J ，T STG工作节点温度和保存温度-55 to +175°C焊接温度，在10秒内300（假设为1.6mm）°C封装扭矩10 lbf•in(1.1N•m)参数典型值最大值单位RθJC节点到外壳——0.75°C/WRθJA接点到环境（PCB安装，稳定状态）——40参数最小典型最大单位测试条件V(BR)DSS~55————V V GS = 0V, I D = 250μAΔV(BR)DSS/ΔT J击穿电压的温度系数——0.057——V/°C参考为25°C,Id=25mAR DS(on)静态漏源导通电阻————8mΩV DS = V GS, I D = 250μAV GS(th) 门极开启电压 2.0—— 4.0 V VDS = 25V, ID = 62A . g fs 前向跨导 44—— —— s VDS = 25V, ID = 62A . I DSS漏源漏电流 —— —— 100 uA V DS =25V,V GS =0V,T J =150℃ —— —— -100 V DS =-20V Q g 总体门极电荷 —— —— 146 nCI D =62A V DS =44V V GS =10V,See Fig.6 and 13Q gs 门源电荷 —— —— 35 Q gd 门漏电荷 —— —— 54 t d(on) 打开延时 —— 14 —— nsV DD =28V I D =62AR G =4.5ΩV GS =10V,See Fig.6and 13t r 上升时间 —— 101 —— t d(off) 关断延时 —— 50 —— t f下降时间 —— 65 —— L D 内部漏极自感 —— 4.5—— nHBetween lead,6mm(0.25in) From packageAnd center of die contact L S内部源极自感——7.5——C ISS 输入电容量 —— 3247 ——pFVGS=0V VDS=25Vf=1.0MHz.See Fig.5C DSS 输出电容量 —— 781 —— C RSS 反向恢复时间 —— 211 —— E AS反向恢复电荷——1050 ○6 264mJ I AS =62A,L=138uH漏源极限和特征参数 最小 典型 最大 单位 测试条件I S持续源极电流（自身二极 管）—— —— 110AMOSFET symbol showing the integral reverse p-n junctiondiode.I SM脉冲源极电流（自身二极 管）—— ——390V SD 二极管前向压降 —— —— 1.3 V T J =25℃,I S =62A,V GS =0V 4 t rr 反向恢复时间 —— 69 104 ns T J =25℃,I F =62A di/dt=100A/us4Q rr 反向恢复电荷 —— 143215nct on前向恢复时间内在打开时间是可以忽略的（打开受控于L S +L D ）○1 反复级别：脉宽小于最大值。

HIR333-H0中文资料

HIR333-H0中文资料

元器件交易网Technical Data Sheet 5mm Infrared LED, T-1 3/4HIR333/H0Features․High reliability ․High radiant intensity ․Peak wavelength λp=850nm ․2.54mm Lead spacing ․Low forward voltage ․Pb free ․The product itself will remain within RoHS compliant version.Descriptions․EVERLIGHT’S Infrared Emitting Diode(HIR333/H0) is a high intensity diode , molded in a yellow transparent plastic package. ․The device is spectrally matched with phototransistor , photodiode and infrared receiver module.Applications․Free air transmission system ․Optoelectronic switch ․Floppy disk drive ․Infrared applied system ․Smoke detectorDevice Selection Guide LED Part No.HIRChip MaterialGaAlAsLens ColorYellowEverlight Electronics Co., Ltd. Device No：DIH-033-001http:\\ Prepared date：07-20-2005Rev 3Page: 1 of 7Prepared by：Jaine Tsai元器件交易网HIR333/H0Package DimensionsNotes: 1.All dimensions are in millimeters 2.Tolerances unless dimensions ±0.25mmAbsolute Maximum Ratings (Ta=25℃)Parameter Continuous Forward Current Peak Forward Current Reverse Voltage Operating Temperature Storage Temperature Soldering Temperature Power Dissipation at(or below) 25℃Free Air Temperature Symbol IF IFP VR Topr Tstg Tsol Pd Rating 100 1.0 5 -40 ~ +85 -40 ~ +85 260 150 Units mA A V ℃ ℃ ℃ mWNotes: *1:IFP Conditions--Pulse Width≦100μs and Duty≦1%. *2:Soldering time≦5 seconds.Everlight Electronics Co., Ltd. Device No：DIH-033-001http:\\ Prepared date：07-20-2005Rev 3Page: 2 of 7Prepared by：Jaine Tsai元器件交易网HIR333/H0Electro-Optical Characteristics (Ta=25℃)Parameter Symbol Condition IF=20mA IF=100mA Radiant Intensity EePulse Width≦100μs ,Duty≦1%Min. 7.8 -----Typ. 15 80 800 850 45 1.45Max. -----1.65 2.40 5.25 10 --UnitsmW/srIF=1APulse Width≦100μs ,Duty≦1%.Peak Wavelength Spectral Bandwidthλp ΔλIF=20mA IF=20mA IF=20mA IF=100mAnm nmForward VoltageVFPulse Width≦100μs ,Duty≦1%-----1.80 4.10 -30VIF=1APulse Width≦100μs ,Duty≦1%.Reverse Current View AngleIR 2θ1/2VR=5V IF=20mAμA degEverlight Electronics Co., Ltd. Device No：DIH-033-001http:\\ Prepared date：07-20-2005Rev 3Page: 3 of 7Prepared by：Jaine Tsai元器件交易网HIR333/H0Typical Electro-Optical Characteristics CurvesFig.1 Forward Current vs. Ambient Temperature140 120 100 80 60 40 200Fig.2 Spectral Distribution100 80 60 40 20 0IF=20mA Ta=25° C-40 -20 020406080100790 810 830 850 870 890 910 930 950Fig.3 Peak Emission Wavelength Ambient Temperature900Fig.4 Forward Current vs. Forward Voltage4 108753 108508252 10800 -2502550751001 10 0 1 2 3 4 5 6 7 8Everlight Electronics Co., Ltd. Device No：DIH-033-001http:\\ Prepared date：07-20-2005Rev 3Page: 4 of 7Prepared by：Jaine Tsai元器件交易网HIR333/H0Typical Electro-Optical Characteristics CurvesFig.5 Relative Intensity vs. Forward Current Fig.6 Relative Radiant Intensity vs. Angular Displacement1000Ie-Radiant Intensity(mW/sr)-20-1001020 301001.0 0.940 50 60 70 80 0.6 0.4 0.2 0 0.2 0.4 0.6100.8 0.7010010110210310 4IF-Forward Current (mA)Fig.7 Relative Intensity vs. Ambient Temperature(°C) Fig.8 Forward Voltage vs. Ambient Temperature(°C)20Ie-Radiant Intensity (mW/sr)1.6151.4IF=20mAIF=20mA101.2525 50 75 100 120125 50 75 100 120Everlight Electronics Co., Ltd. Device No：DIH-033-001http:\\ Prepared date：07-20-2005Rev 3Page: 5 of 7Prepared by：Jaine Tsai元器件交易网HIR333/H0Reliability Test Item And Condition The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% NO. Item Test Conditions Test Hours/ Sample Cycles Sizes 10secs 22pcs 22pcs IR≧U×2 Ee≦L×0.8 VF≧U×1.2 U：Upper 1000hrs 1000hrs 1000hrs 1000hrs 22pcs 22pcs 22pcs 22pcs Specification Limit 0/1 L：Lower Specification 0/1 Limit 0/1 0/1 Failure Judgement Criteria Ac/Re1 Solder HeatTEMP.：260℃±5℃0/1 0/12 Temperature Cycle H : +100℃ L : -40℃ 3 Thermal Shock H :+100℃ L :-10℃ 4 High Temperature Storage 5 Low Temperature Storage15mins 300Cycles 5mins 15mins 5mins 10secs 5mins 300Cycles22pcs0/1TEMP.：+100℃ TEMP.：-40℃6 DC Operating Life IF=20mA 7 High Temperature/ 85℃ / 85% R.H High HumidityEverlight Electronics Co., Ltd. Device No：DIH-033-001http:\\ Prepared date：07-20-2005Rev 3Page: 6 of 7Prepared by：Jaine Tsai元器件交易网HIR333/H0Packing Quantity Specification1.500PCS/1Bag，5Bags/1Box 2.10Boxes/1CartonLabel Form SpecificationCPN: Customer’s Production Numb P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: Peak Wavelength REF: Reference LOT No: Lot Number MADE IN TAIWAN: Production PlaceRoHSHIR333/H0Notes1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent.EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.CTel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\Everlight Electronics Co., Ltd. Device No：DIH-033-001http:\\ Prepared date：07-20-2005Rev 3Page: 7 of 7Prepared by：Jaine Tsai。