ALEXA数字摄影机使用者培训手册
- 格式:pptx
- 大小:13.54 MB
- 文档页数:53


DO NOT DOWNLOADLorex HomeCongratulations! You can now view live video from your camera on yourmobile device.tab, tap .If this is not your first device, tap.Connect to Wi-Fi• Select your Wi-Fi network from the list.• Enter your Wi-Fi password, then tap Connect.Camera Password:Finishing touches• Wait until the status LED onthe camera is solid green,then tap Next.• The camera is added to your Lorex Home account.• Set the camera name and timezone, then tap Complete.W281AA_QSG_EN_R1Quick Setup GuideCopyright © 2019 Lorex CorporationAs our products are subject to continuous improvement, Lorex reserves the right to modify product design,specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved.STEP 3A: Wall Mounting• A ngle the camera between 30~60° down from the level position.• I nstall the camera between 8-16ft (2.5-5m) off of the ground.NOTE: Accuracy of person and vehicle detection will be influenced by multiple factors, such as the object’s distance from the camera, the size of the object, and the height and angle of the camera. Night vision will also impact the accuracy of detection.• C hoose a location where objects of interest will be between 5-50ft (1.5-15m) from the camera.1. Unplug the camera.2. Use the included mounting template HCD E F GI J KL MB* Quad-channel view allows you to view up to 3 other cameras, or channels from a security system. Tap the empty channel to select additional devices.** HD resolution will be limited to the maximum screen resolution of your mobile device. This will not impact the recording resolution of the camera.A • A regulated UL / CSA approved power supply is required for use with this camera (included). Use of a non-regulated, non-conforming power supply can damage this product and voids the warranty.• Not intended for submersion in water. Installation in a sheltered location recommended.• This camera includes an Auto Mechanical IR Cut Filter. When the camera changes between Day/Night viewing modes, an audible clicking noise may be heard from the camera. This clicking is normal, and indicates that the camera filter is working.• Audio recording without consent is illegal in certain jurisdictions. Lorex Corporation assumes no liability for use of its products that does not conform with local laws.DisclaimersA B C D EPerson Detection: Tap to enable/disable person detection. Motion notifications will state when a person is detected.Motion Detection: Tap to enable/disable motion detection.Vehicle Detection: Tap to enable/disable vehicle detection. Motion notifications will state when a vehicle has been detected.Motion Sensitivity: Set a sensitivity level for motion detection (1 is the lowest).Warning LED Light: Tap to enable/disable automatic warning light triggeringwhen motion, person, or vehicle is detected.tab (default screen when launching Lorex Home), tap next to Detection Settings .For complete app instructions, see the Lorex Home manual on your .W281AA_QSG_EN_R1Once you have completed initial setup using the Lorex Home app detailed on the front page, and reviewed all installation notices above,select one of the installation methods below:Congratulations! Your camera is fully installed and ready to go.Now let’s start exploring what your camera can do. See the section below for an overview of features using Lorex Home.。