PGP_9.6_使用手册_Ver1.3

Notice The content of data sheet is subject to change without prior notice.In the absence of con fi rmation by device speci fi cation sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP GP1S196HCZ0F GP1S196HCZSFGap : 1.1mm, Slit : 0.3mm Phototransistor Output, Compact Transmissive Photointerrupter■DescriptionGP1S196HCZ0F is a compact-package, photo-tran-sistor output, transmissive photointerrupter, with oppos-ing emitter and detector in a molding that provides non-contact sensing. The compact package series is a result of unique technology combing transfer and injection molding.This device is half the size of the rest of the parts in this family.■Features1. Transmissive with phototransistor output2. Highlights : • Compact Size • Low Pro fi le • Narrow Gap • Through-hole : GP1S196HCZ0F • SMT : GP1S196HCZSF3. Key Parameters : • Gap Width : 1.1mm• Slit Width (detector side): 0.3mm • Package : 3.1×2×2.7mm 4. RoHS directive compliant■Agency approvals/Compliance1. Compliant with RoHS directive■Applications1. General purpose detection of object presence or mo-tion.2. Example : printer, lens control for camera■Internal Connection Diagram■Outline Dimensions(Unit : mm)Plating material : SnCu (Cu : TYP . 2%)Top viewAnode Collector Emitter CathodeCountry of originJapan■Absolute Maximum Ratings■Electro-optical Characteristics (T a=25˚C )Parameter Symbol Rating UnitInput Forward current I F30mA Reverse voltage V R6V Power dissipation P75mWOutput Collector-emitter voltage V CEO35V Emitter-collector voltage V ECO6V Collector current I C20mA Collector power dissipation P C75mWTotal power dissipation P tot100mWOperating temperature T opr−25 to +85˚CStorage temperature T stg−40 to +100˚C∗1Soldering temperature Tsol260˚C∗1 For 3s or less(T a=25˚C ) Parameter Symbol Condition MIN.TYP.MAX.UnitInput Forward voltage V F I F=20mA− 1.2 1.4V Reverse current I R V R=3V−−10μAOutput Collector dark current I CEO V CE=20V−−100nATransfer charac-teristics Collector current I C V CE=5V, I F=5mA100−400μA Collector-emitter saturation voltage V CE(sat)I F=10mA, I C=40μA−−0.4VResponse timeRise time t rV CE=5V, I C=100μA, R L=1kΩ−50150μs Fall time t f−50150(GP1S196HCZ0F)Fig.5 Collector Current vs. Collector- emitter VoltageFig.6 Relative Collector Current vs.Ambient TemperatureFig.3 Forward Current vs. ForwardVoltageFig.4 Collector Current vs. Forward Current101001F o r w a r d c u r r e n t I F (m A )Forward voltage V F (V)Forward current I F (mA)11.10.90.80.70.60.50.40.30.20.1C o l l e c t o r c u r r e n t I C (m A )21.61.20.80.4C o l l e c t o r c u r r e n t I C (m A )Collector-emitter voltage V CE (V)R e l a t i v e c o l l e c to r c u r r e n t (%)Ambient temperature T a (C)0130120110100908070605040302010Fig.1 Forward Current vs. Ambient TemperatureFig.2 Power Dissipation vs. Ambient Temperature0605040302010 25025*********F o r w a r d c u r r e n t I F (m A )Ambient temperature T a (˚C) 060408010012020P o w e r d i s s i p a t i o n P , P c , P t o t (m W )Ambient temperature T a (˚C)7515Fig.7 Collector-emitter Saturation Votage vs. Ambient TemperatureFig.8 Collector Dark Current vs. Ambient TemperatureFig.9 Response Time vs. Load ResistanceFig.10 Test Circuit for Response TimeFig.11 Relative Collector Current vs. Shield Distance (1)Fig.12 Relative Collector Current vs. Shield Distance (1)C o l l e c t o r -e m i t t e r s a t u r a t i o n v o l t a g e V C E (s a t ) (V )Ambient temperature T a (˚C)0.20.180.160.140.120.10.080.060.040.11 000101100R e s p o n s e t i m e (μs )Load resistance R L (k Ω)10 1010 910 710 610 8C o l l e c t o r d a r k c u r r e n t I C E O (A )Ambient temperature T a (˚C)R e l a t i v e c o l l e c t o r c u r r e n t (%)100203040506090100708000.511.52Shield moving distance L (mm)R e l a t i v e co l l e c t o r c u r r e n t (%)100203040506090100708000.511.52Shield moving distance L (mm)Remarks : Please be aware that all data in the graph are just for reference and not for guarantee.■Design Considerations ●Design guide1) Prevention of detection errorTo prevent photointerrupter from faulty operation caused by external light, do not set the detecting face to the external light.2) Position of opaque boardOpaque board shall be installed at place 1.4mm or more from the top of elements.(Example)This product is not designed against irradiation and incorporates non-coherent IRED.●DegradationIn general, the emission of the IRED used in photointerrupter will degrade over time.In the case of long term operation, please take the general IRED degradation (50% degradation over 5 years) into the design consideration.●Recommended Foot Print (Only for GP1S196HCZSF)1.4mm or more●PartsThis product is assembled using the below parts.• Photodetector (qty. : 1)Category Material Maximum Sensitivitywavelength (nm)Sensitivitywavelength (nm)Response time (μs)Phototransistor Silicon (Si)930700 to 1 20020• Photo emitter (qty. : 1)Category Material Maximum light emittingwavelength (nm)I/O Frequency (MHz)Infrared emitting diode(non-coherent)Gallium arsenide (GaAs)9500.3 • MaterialCase Lead frame Lead frame platingBlack polyphernylenesulfi de resin (UL94 V-0)42Alloy SnCu plating■Manufacturing Guidelines●Storage and management after open (Only for GP1S196HCZSF)Storage conditionStorage temp.: 5 to 30˚C, Storage humidity : 70%RH or less at regular packaging.Treatment after opening the moisture-proof packageAfter opening, you should mount the products while keeping them on the condition of 5 to 25˚C and 70%RH or less in humidity within 4 days.After opening the bag once even if the prolonged storage is necessary, you should mount the products within two weeks.And when you store the rest of products you should put into a DRY BOX. Otherwise after the rest of products and silicagel are sealed up again, you should keep them under the condition of 5 to 30˚C and 70%RH or less in humidity.Baking before mountingWhen the above-mentioned storage method could not be executed, please process the baking treatment before mounting the products.However the baking treatment is permitted within one time.Recommended condition : 125˚C, 16 to 24 hours∗Do not process the baking treatment with the product wrapped. When the baking treatment processing, you should move the products to a metallic tray or fi x temporarily the products to substrate.●Soldering MethodRefl ow Soldering (Only for GP1S196HCZSF) :Refl ow soldering should follow the temperature profi le shown below.Soldering should not exceed the curve of temperature profi le and time.Please solder within one time.MAX200˚CMAX160˚C25˚CFlow Soldering:Soldering should be completed below 260˚C and within 3 s.Please solder within one time.Soldering area is 0.3mm or more away from the bottom of housing.Please take care not to let any external force exert on lead pins.Please don't do soldering with preheating, and please don't do soldering by refl ow.Other noticePlease test the soldering method in actual condition and make sure the soldering works fine, since the impact on the junction between the device and PCB varies depending on the cooling and soldering conditions.●Cleaning instructionsSolvent cleaning :Solvent temperature should be 45˚C or below. Immersion time should be 3 minutes or less.Ultrasonic cleaning :Do not execute ultrasonic cleaning.Recommended solvent materials :Ethyl alcohol, Methyl alcohol and Isopropyl alcohol.●Presence of ODCThis product shall not contain the following materials.And they are not used in the production process for this product.Regulation substances : CFCs, Halon, Carbon tetrachloride, 1.1.1-Trichloroethane (Methylchloroform)Specifi c brominated fl ame retardants such as the PBBOs and PBBs are not used in this product at all.This product shall not contain the following materials banned in the RoHS Directive (2002/95/EC).•Lead, Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls (PBB), Polybrominateddiphenyl ethers (PBDE).■Package specifi cation●Sleeve package1. Through-hole (GP1S196HCZ0F)Package materialsSleeve : PolycarbonateStopper : Styrene-ElastomerPackage methodMAX. 200 pcs. of products shall be packaged in a sleeve. Both ends shall be closed by tabbed and tabless stoppers.MAX. 50 sleeves in one case.2. SMT Gullwing (GP1S196HCZSF)Package materialsSleeve : PolycarbonateStopper : Styrene-ElastomerAluminium laminated Bag : Nylon, Polyphernylene, AluminiumPackage methodMAX. 200 pcs. of products shall be packaged in a sleeve. Both ends shall be closed by tabbed and tabless stoppers.MAX. 50 sleeves with silicagel are enclosed in aluminium laminated bag. After sealing up the bag, it encased in one case.11Sheet No.: D3-A01001F EN■Important Notices· The circuit application examples in this publication are provided to explain representative applications of SHARP devices and are not intended to guarantee any circuit design or license any intellectual property rights. SHARP takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of SHARP's devices.· Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. SHARP reserves the right to make changes in the speci fi cations, characteristics, data, materials, structure, and other contents described herein at any time without notice in order to improve design or reliability. Manufacturing locations are also subject to change without notice.· Observe the following points when using any devices in this publication. SHARP takes no responsibility for damage caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used speci fi ed in the relevant speci fi cation sheet nor meet the following conditions:(i) The devices in this publication are designed for use in general electronic equipment designs such as:--- Personal computers --- Of fi ce automation equipment--- Telecommunication equipment [terminal]--- Test and measurement equipment --- Industrial control--- Audio visual equipment --- Consumer electronics(ii) Measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when SHARP devices are used for or in connectionwith equipment that requires higher reliability such as:--- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.)--- Traf fi c signals--- Gas leakage sensor breakers --- Alarm equipment--- Various safety devices, etc.(iii) SHARP devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety such as:--- Space applications--- Telecommunication equipment [trunk lines]--- Nuclear power control equipment--- Medical and other life support equipment (e.g., scuba).· If the SHARP devices listed in this publication fall within the scope of strategic products described in the Foreign Exchange and Foreign Trade Law of Japan, it is necessary to obtain approval to export such SHARP devices.· This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of SHARP . Express written permission is also required before any use of this publication may be made by a third party.· Contact and consult with a SHARP representative if there are any questions about the contents of this publication.[H135]。

PGP维护指导一、软件备份在调试期间应注意每天对画面和数据库组态进行备份；调试结束正常运行期间应将168后的画面和数据库组态进行备份，每次对画面或数据库有较大修改之前及之后都应做备份。

1、License备份在PGP安装完成导入License后将会在“D:\PGP\sources\licenses目录下生成“PGP.sla”文件，将每台服务器的该文件拷贝出来做备份，这样下次重新安装PGP时只需将该文件拷贝到相应文件夹中而不需要再重新导入License。

2、数据库备份PGP的所有的数据库都存放在“D:\PGP\config”目录下面的每个子文件夹中，其中SYMPHONY系统较为常用且需要组态的数据库文件及其说明如下表所示，每次备份应将整个目录拷贝出来。

3、画面备份PGP所有的画面都存放在“D:\PGP\display”目录下，其中“D:\PGP\display\work”目录下存放离线的可编辑画面及符号，“D:\PGP\display\bin”目录下存放在线的系统显示画面，离线画面分别以“.UCBD，.UCBG，.UCBP，.UCBV”为后缀，在线画面分别以“.DIAG，.G，.PAGE，.VAR”为后缀，两者互相对应，可以通过修改后缀名将在线画面转换成可编辑的离线画面。

备份画面时应将所有的离线画面、符号以及所有的在线画面、符合和面板都备份出来。

4、注册表备份如下图所示，可以将PGP的注册表文件导出做备份，下次重新安装PGP后若计算机名一样可以直接将注册表项导入以保证和之前的设置一样。

图 2. 导出PGP的注册表二、标签库组态在PGP所有的数据库中最重要的也是最复杂的就是TAG标签库，对于出厂发到现场的PGP标签库都会按照标准的设置做好，对于现场做通讯时需要添加一些标签时除了按照模板添加点还应当注意其中的一些字段的设置。

1、常用字段说明：下表列出了一些常用的字段的说明，添加标签时可以按照说明对字段进行一些修改。

ZED-F9P FW 1.00 HPG 1.32 ZED-F9PRelease NoteAbstractThis document contains general information, interface changesand firmware changes (features, improvements), along with knownlimitations for ZED-F9P FW 1.00 HPG 1.32.UBX-22004887 - R01C1-PublicDocument informationTitle ZED-F9P FW 1.00 HPG 1.32Subtitle ZED-F9PDocument type Release NoteDocument number UBX-22004887Revision and date R0102-May-2022 Disclosure restriction C1-Publicu-blox or third parties may hold intellectual property rights in the products, names, logos and designs included in this document. Copying, reproduction, modification or disclosure to third parties of this document or any part thereof is only permitted with the express written permission of u-blox.The information contained herein is provided "as is" and u-blox assumes no liability for its use. No warranty, either express or implied, is given, including but not limited to, with respect to the accuracy, correctness, reliability and fitness for a particular purpose of the information. This document may be revised by u-blox at any time without notice. For the most recent documents, visit .Copyright © 2022, u-blox AG.UBX-22004887 - R01Page 2 of 7C1-PublicContents1 General information (4)1.1 Scope (4)1.2 Released firmware image (4)1.3 Related software (4)1.4 Related documents (4)2 Message interface (5)2.1 UBX (5)2.2 NMEA (5)2.3 RTCM (5)2.4 SPARTN (5)2.5 Interface changes (5)2.5.1 New (5)2.5.2 Modified (5)2.5.3 Removed (5)3 Improvements (6)4 Known limitations (7)UBX-22004887 - R01Contents Page 3 of 7C1-Public1 General information1.1 ScopeThis Release Note applies to ZED-F9P with Firmware 1.00 HPG 1.32.The document covers the changes in the ZED-F9P firmware compared to firmware version FW 1.00 HPG 1.30. Please refer to u-blox ZED-F9P Release Note FW 1.00 HPG 1.30 for a full description. 1.2 Released firmware imageFile UBX_F9_100_HPG_132_ZED_F9P.df73486d99374142f3aabf79b7178f48.binFirmware version EXT CORE 1.00 (0fa0ae)FWVER=HPG 1.32ROM base support ROM 1.02 - ROM BASE 0x118B2060ROM 1.01 - ROM BASE 0xDD3FE36CROM 0.40 - ROM BASE 0xCAAF619CTable 1: Released firmware image for u-blox ZED-F9P1.3 Related softwareIt is recommended to use u-center GNSS evaluation software version 22.05 (or later) with the released product.1.4 Related documents[1]HPG 1.32 Interface description, UBX-22008968[2]ZED-F9P-04B Data sheet, UBX-21044850[3]ZED-F9P Integration manual, UBX-18010802[4]ZED-F9P Release note FW 1.00 HPG 1.30, UBX-21047459For regular updates to u-blox documentation and to receive product change notifications please register on our homepage (https://).UBX-22004887 - R011 General information Page 4 of 7C1-Public2 Message interface2.1 UBXZED-F9P FW 1.00 HPG 1.32 supports UBX protocol version 27.31.2.2 NMEAZED-F9P FW 1.00 HPG 1.32 supports up to NMEA protocol version 4.11.Five NMEA standards are supported. The default NMEA version is 4.11, and, alternatively, versions 4.10, 4.0, 2.3, and 2.1 can be enabled.2.3 RTCMZED-F9P FW 1.00 HPG 1.32 supports up to RTCM3 standard version 3.3.2.4 SPARTNZED-F9P FW 1.00 HPG 1.32 supports up to SPARTN protocol version 2.0.1.2.5 Interface changes2.5.1 NewMessage / Configuration item Description / Comment--2.5.2 ModifiedMessage / Configuration item Description / CommentUBX-RXM-SPARTNKEY Message can be send at any time to overwrite previously saved keys, without needinga system restart or without needing to wait for previously saved keys to expireCFG-UART2INPROT-UBX Default value changed from false to true; enables UBX input protocol support onUART2 by defaultCFG-QZSS-SLAS_MAX_BASELINE Default value changed from 200 km to 350 km2.5.3 RemovedMessage / Configuration item Description / Comment--UBX-22004887 - R012 Message interface Page 5 of 7C1-Public3 Improvements•Increased receiver robustness in southern hemisphere when SPARTN input is provided •When QZSS L1S is enabled, QZSS L1C/A reports now correct 'Half cycle validity' information in UBX-RXM-RAWX•UBX-RXM-SPARTNKEY can be polled on all ports, not only on UART1•UBX-RXM-SPARTNKEY can be send at any time to overwrite previously saved keys, without needing a system restart or without needing to wait for previously saved keys to expire •SPARTN IP stream decryption robustness improvements to ensure decryption is performed only on valid data verified fully as a SPARTN frameUBX-22004887 - R013 Improvements Page 6 of 7C1-Public4 Known limitations• A receiver moving at very slow speed (less than 10 cm/s) does not update the heading information in UBX-NAV-PVT. The velocity vectors can be used reliably.•Geofence status pin must not be re-assigned to another pin•If the receiver is configured to output RTCM messages on several ports, the ports must have the same RTCM configuration, otherwise the MSM multiple message bit might not be set correctly•Time pulse can only be synced to GNSS. Configuration items and relevant flag cannot be set to false (CFG-TP-SYNC_GNSS_TP1, UBX-CFG-TP5)•If the receiver is configured to GLONASS only operation, it cannot get a PPP-RTK fix when using SPARTN corrections•Static hold mode is unreliable at navigation rates larger than 1 Hz•Incorrect SBAS pseudo range value corresponding to 4 ms shift may be reported in UBX-RXM-SFRBX messages. This can be detected by monitoring the halfCyc flag in UBX-RXM-RAWX.•Lower navigation rate achievable compared to previous firmware; performance figures available in related Data sheet document•UART2 may report different UBX-INF-ERROR messages than the ones reported on the other interfaces•UBX-RXM-COR message does not get output for SPARTN protocol corrections, while the configuration item CFG-SPARTN-USE_SOURCE is set to LBAND•UBX-RXM-COR and UBX-RXM-SPARTN messages do not get output for encrypted SPARTN protocol corrections, while the configuration item CFG-SPARTN-USE_SOURCE is set to IP and no valid key is available in UBX-RXM-SPARTNKEY•Encrypted SPARTN protocol corrections received on UART2 are not reported as SPARTN input in UBX-MON-COMMS and UBX-MON-MSGPP, while the configuration item CFG-SPARTN-USE_SOURCE is set to IP and no valid key is available in UBX-RXM-SPARTNKEYUBX-22004887 - R014 Known limitations Page 7 of 7C1-Public。

前言感谢您使用新一代画面和逻辑编程软件GP-Pro EX V2.21简体中文版。

在使用这些产品之前，请认真阅读本手册，并妥善保管以备将来参考。

注意(1)“GP-Pro EX”软件包(以下简称为“本产品”)中包含的所有程序和手册的版权均为Digital Electronics Corporation所有。

Digital Electronics Corporation按照本产品CD-ROM中包含的“软件许可协议”授予用户使用本产品的权利。

任何违反上述条款的行为均为日本及国际法规所禁止。

(2)本手册的内容已经经过彻底的审查，但是，如果您在本手册中发现了任何错误或疏漏，请告知您当地的GP代理商。

(3)对因使用本产品而造成的损坏或第三方索赔，Digital Electronics Corporation不承担任何责任。

(4)本手册中的描述与本产品的实际功能之间可能存在差异。

有关本产品的最新信息将在数据文件(如Readme.txt文件等)和其他文档中另行提供。

在使用产品之前，请参考这些资料及本手册。

(5)本手册为Digital Electronics Corporation发布的英文手册的简体中文版。

(6)尽管本产品包含和显示的信息可能涉及Digital Electronics Corporation或第三方的无形产权或知识产权，但Digital Electronics Corporation不向任何用户和/或其他第三方担保或授权上述产权的使用。

Digital Electronics Corporation不承担与第三方知识产权有关的任何责任，也不承担与使用本产品所包含或显示信息有关的任何责任。

© 2008 Digital Electronics Corporation版权所有，保留所有权利。

Digital Electronics Corporation，2008年8月 有关商标和商标名称权利的信息，请参阅“商标权利”。

索引数字16384色 ..........................................................8-39 16级 ................................................................8-39 256色 ..............................................................8-39 2维码阅读器 .........................................16-4, 16-11 3速闪烁 ...........................................................8-39 4096色 ............................................................8-39 65536色 ..........................................................8-39 AAPI通讯 .......................................................37-159 AUX输出 .......................................................10-50安全 .............................................................28-134安全级别列表 .................................................21-23安全设置 ........................................................21-19按键 ...............................................................15-27 BBMP/JPEG，粘贴 ............................................8-76包注册 ............................................................8-104本地窗口 .................................................12-4, 12-7保持/非保持区的数量 ...................................28-16保持传输 ........................................................28-83保持区 ............................................................28-16保存CSV格式 ................................................19-55报警历史 .................................................19-55保存到存储设备的注意事项 .........................23-143保存至CF卡 ......................................................19-59 CF卡，注意 ...........................................19-61 CF卡或USB存储器 ...............................19-58 USB存储器，注意 ..................................19-61保存至CF卡 ..................................................11-18保护对象 ..........................................................8-38报警 .................................................................19-1位监控 .....................................................19-22文本 ......................................................19-159显示，脚本 .............................................20-17备份历史 .................................................19-76部件 ......................................................19-103打印历史 ...............................................19-155冻结模式 ...............................................19-132功能列表 ...............................................19-160历史 .............................................19-21, 19-31历史数据的存储空间要求 ........................19-80列表视图 .................................................19-15设置 ........................................................19-70摘要 ...........................................19-79, 19-136直接选择 ...............................................19-118字监控 .....................................................19-26组 ............................................................19-79报警文件位置 ........................................................19-60名称 ........................................................19-60报警消息显示位置 ..........................................19-10报警历史数据 .................................................24-31报警语言，切换 ..............................................17-66背光灯颜色切换设置 ......................................5-175备份 ................................................................5-165备份SRAM ....................................................19-80备份SRAM容量 ..............................................5-93备份数据，创建 ..............................................32-37比较，条件 ...................................................20-140比较存储器 .....................................................20-75比较工程 ........................................................32-25笔记录 ............................................................18-47编号，自动 ...................................................24-105变量 ................................................................28-13变量格式 ........................................................28-19标记限制 ........................................................8-104标记，显示图像 ................................................8-82标记注册 .............................................8-101, 8-102标签 ................................................................28-62标签，查找和更换 ............................................5-73标准字体 ............................................................6-3播放列表创建文件 .................................................26-26使用 ........................................................26-26步数 ..................................................................28-5部件，编辑 .......................................................8-49部件，查找和替换地址 .....................................5-73部件工具箱 .......................................................5-86部件名称，逻辑画面 ........................................28-5 CCF卡 .............................................................5-189保存注意事项 .............................5-187, 23-143初始化 ..........................................32-37, 32-42传输工程文件 ..........................................32-36复制到 .....................................................32-29目标文件夹 ................................................5-94设置文件夹 ................................................5-45使用注意事项 ......5-187, 11-27, 19-61, 23-144 CF卡文件操作 .............................................20-102 CF卡，保存至控制字地址 ..............................................19-59注意事项 .................................................19-61 CF卡，操作注意事项 ..................................24-116 CF卡工具 ......................................................32-28 CSV文件，读取 ..........................................20-118 CSV格式 .......................................................24-31 CSV数据显示 .................................24-31, 24-37, 24-81编辑 ........................................................24-41传输 .................................24-57, 24-62, 24-89打印 ........................................................24-42流 ..............................................................24-4采样CSV格式 ................................................23-20概述 ..........................................................23-2将数据保存至CF卡 ................................23-20结构 ......................................................23-108如果不能进行数据采样时 ......................23-126数据 ........................................................23-14数据显示器 ...........................................23-122数据，时间 ...........................................23-113数据存储方法 ........................................23-119数据的显示格式 ......................................23-30数据使用容量 ........................................23-110组列表 .....................................................23-37采样设置 ........................................................18-11采样数据 ........................................................24-31采样数据显示器 ...........................................23-102操作时间表 .......................................................22-1操作数 .......................................5-170, 28-5, 28-65操作数设置 .....................................................28-65插入逻辑指令 .................................................28-50查找 ...............................................................5-119查找和更换 .......................................................5-73重叠图片 ...................................................9-8, 9-11初始化存储器 ......................................20-88, 20-89触发操作 .........................................................A-57触发条件 ........................................................20-43触摸，两次 .....................................................10-28处理中 ............................................................14-74传输配方 .............................................24-47, 24-53传输工具 ........................................................32-56安装 ........................................................32-68安装要求 .....................................................3-5传输工程文件 ...................................................32-6传输设置 ........................................................32-59串口操作 ........................................................20-92串口端口操作 .................................................20-57窗口显示 ..........................................................12-7创建 ..........................................................12-4切换 ........................................................12-11在一个画面上显示多个 ...........................12-30窗口边框 ......................................................37-160窗口部件 ........................................................12-21窗口画面 ......................................................19-149从CF卡到U盘 ..............................................A-83从U盘到CF卡 ..............................................A-83从多个GP的执行外部操作 ..........................19-157从模板中选择画面 ............................................8-72从其他工程复制 .............................................5-104从外部存储器上下载 ......................................32-36存储器循环 ........................................................20-82操作 ........................................................20-73存储器限制 ...................................................28-123存储设备上的可用空间 ...................................11-26错误检查 .............................................5-106, 5-173 DDirect Access法 ......................7-7, 7-8, 11-25, A-4Direct Access法 + Memory Link法 ............7-8, 7-9 Direct Access和Memory Link一起使用 ........A-39 DRAM ..........................................................23-110 D脚本 ..............................................................20-2 D脚本编程 .......................................................20-2打印布局 ..........................................................33-8当前画面 .................................................33-20工程设置 .................................................33-40简介 ..........................................................33-4批打印 .....................................................19-73取消 ........................................................33-30实时打印 .................................................19-73打印格式 ........................................................19-74打印功能 ........................................................33-12打印机连接 ........................................................33-12配置 .............................................33-14, 33-18打印机操作 ...................................................20-126打印机类型 .....................................................33-11单色16级 .........................................................8-39 LCD ..........................................................8-39地址转换多个 ...................................................5-40地址操作 ........................................................24-94地址格式 ........................................................28-31地址监控 ......................................................28-104地址块显示 .....................................................18-24地址块转换 .....................................................5-100地址列表显示 ..........................................................5-32确认 ..........................................................5-31地址设置 ........................................................5-110地址刷新 ......................................................28-131地址转换图案，更改设备类型 ..........................7-21调用函数 ........................................................20-55调用和显示图片 ...............................9-4, 9-10, 9-15调用画面 .................................................8-62, 8-63读取文件 ......................................................20-121读取区，内部寄存器 ......................................18-72对象编辑 ..........................................................8-26对齐 ..........................................................8-34翻转 ..........................................................8-36放大/缩小 ................................................8-28复制 ..........................................................8-29取消组合 ...................................................8-32移动 ..........................................................8-28组合 ..........................................................8-32旋转 ..........................................................8-35对齐行 .....................................17-62, 17-63, 17-65居中 .............................................17-63, 17-64固定位置 .................................................17-62对齐到网格 .......................................................8-99多功能 .................................................10-36, 10-75多语言 .................................................17-15, 17-24FFTP服务器 ....................................................5-189发送数据 ........................................................32-66反映在控制器/PLC中 ....................................11-16放置包中注册的图片 ........................................8-65分辨率，转换 ......................................5-104, 5-128分层画面切换 .................................................11-21分支 ...............................................................28-48分支，插入 .....................................................28-41蜂鸣器 ..............................10-50, 25-1, 25-7, 25-10符号 ......................................................5-51, 28-13符号变量 ...............................5-177, 28-13, 28-123符号变量，导入/导出 ...................................28-27复制存储器 ..........................................20-78, 20-81复制工具 ......................................................37-169富文本文件 .......................................................33-4 GGP-Pro EX .........................................................1-2 GP-PRO/PBIII for Windows ...............................2-2 GP到PC接收工程文件 .................................32-9, 32-18 GP开机时的默认画面显示，选择 ....................11-7工具栏，自定义 ...............................................28-6工程文件备份 ..........................................................5-23创建 ............................................................5-9设置 ............................................................5-9工程信息查看 ..........................................................5-43工程转换器 .......................................................2-12工作区 ............................................................5-108固定别针 ...............................................5-117, 8-38观察列表 ......................................................28-157光标形状 ......................................................19-134归档 .................................................................33-4滚动报警显示 .................................................19-79滚动报警消息 ...................................................19-8 HHMI系统变量(#H系统变量) ........................A-109行，插入 ........................................................28-41函数名 ............................................................20-61互锁 ...............................................................10-19互锁触摸操作控制 ..........................................14-24互锁设置 ........................................................21-24画面保存显示的画面 ......................................11-18复制 ..........................................................5-69画面显示正在关闭 ...................................34-7, 34-9画面，切换 .....................11-4, 11-10, 11-13, 11-21画面捕捉 .................................5-190, 11-18, 11-26画面捕捉，JPEG文件 ..................................11-18画面各部分的名称 ............................................5-84画面列表 ........................................................5-115画面信息 ........................................................5-180画面属性更改 ...................................................5-67画面数据列表窗口 ..........................................5-118画面颜色，更改 ................................................5-66绘图 ....................................................................8-1绘制矩形 ..........................................................8-10按像素 .........................................................8-7标尺 ..........................................................8-18表格 ..........................................................8-20多边形 .......................................................8-16弧/饼形 ....................................................8-14圆/椭圆 ....................................................8-12直线/折线 ..................................................8-8 IIPC设置 .......................................................37-152 JJPEG文件，画面捕捉 ...................................11-18基本操作 ............................................................5-1监控步 ............................................................5-171兼容性 ................................................................2-2键盘系统 ........................................................15-20弹出式 ............................................15-3, 15-37设置 .................................................15-3, 15-6用户 ........................................................15-22用户创建的 ................................................15-9注册 ........................................................15-23交叉参考 ...............................................5-32, 5-103脚本 ................................................................5-166编程 ........................................................20-55创建 ........................................................20-23创建全局 .................................................20-39错误代码列表 ..........................................20-63打印自 .....................................................20-21函数摘要 .................................................20-27扩展，结构 ..............................................20-22全局D脚本 .............................................20-50运算 ..........................................................20-5主函数 .....................................................20-27脚本设置 ........................................................5-163接收数据 ........................................................32-67 KKanji转换 ............................................15-28, 15-40开关 ..................................................................10-1位 ............................................................10-45选择 ........................................................10-72标签 ........................................................10-55单选 ........................................................10-38切换画面 .................................................10-62特殊 ........................................................10-63颜色更改 .................................................10-31字 ............................................................10-59开关指示灯 .....................................................10-42开始操作的工作流程 ...................................4-2, 4-3可用地址 ....................................................A-4, A-7控制器/PLC ...................................................5-160控制器/PLC系列的设置 ..................................5-89控制器/PLC系统数据区分配 ..........................A-23控制器/PLC，更改 .................................7-16, 7-26控制字地址，保存至CF卡 ............................19-59 LLS区 .................................................................A-8蓝色LCD .........................................................8-39历史数据 ........................................................18-15连接多台PLC ....................................................7-7两次触摸 ........................................................10-28逻辑系统变量（#L系统变量） .......................A-90逻辑程序，纠正错误 ......................................28-85逻辑程序数量限制 ........................................28-123逻辑存储器 ...................................................28-121逻辑存储器的验证方法 .................................28-121逻辑监控 ......................................................28-101逻辑监控，启动和停止 ...................................28-99逻辑图监控 ......................................................A-45逻辑运算示例 ...............................................20-162逻辑指令 ......................................................28-114逻辑指令图标列表 ............................................28-8 MMemory Link法 ......................................11-25, A-6 Memory Loader ..................................32-36, 32-63脉冲 ...............................................................28-70每画面的功能数 .............................................5-184每画面的数据容量 ..........................................5-184密码......................5-27, 5-95, 5-96, 28-134, 32-31编辑 ..........................................................5-28删除/更改 ..............................................32-34命令和状态 .....................................................19-59模板注册 ........................................................5-182 N内部寄存器到数据缓冲器 .............................20-151内部设备地址 .............................................A-5, A-7 PPC到GP发送工程文件 .................................32-6, 32-13使用调制解调器传输画面数据 .................32-48 PC工程模拟 ....................................................31-1 PC上的工程模拟 .............................................31-1 PID监控 .......................................................28-153 PLC与多台控制器通讯 .......................................7-1配方CSV格式 ................................................24-10 CSV数据 .........................24-10, 24-18, 24-26保存至CF卡 ..........................................24-11传输 .................................24-47, 24-53, 24-68传输CSV数据 ..........................................24-3传输配方数据 ............................................24-3概述 ..........................................................24-2配方数据 .................................................24-43设置 ........................................................24-57数据 ........................................................24-31数据，传输 ..............................................24-64配方数据传输 ...............................24-47, 24-53, 24-107流 ..............................................................24-5容量 ......................................................24-108偏移地址计算示例 ........................................20-165屏幕保护程序 ..........................................34-1, 34-7 Q启用系统区 ..........11-12, 11-17, 12-20, 25-9, 25-12切换显示 ........................................................12-17切换画面 .............................................11-10, 11-13切换基本画面 .................................................19-36切换视图 ........................................................5-181强制画面切换 ...............................A-12, A-14, A-29清除区 .................................................15-26, 15-39全局窗口 ...............................................12-4, 12-14全局互锁 .............................................21-10, 21-25 R日期/时间显示 ..............................................14-92日语FEP ........................................................15-40软件包内容 .........................................................3-2 SSRAM ............................................................19-80 SRAM，注意事项 ..........................................5-190 SRAM备份 ..................................................23-109 SRAM备份，关于 .......................................24-108 STN伪彩LCD .................................................8-39扫描时间 ...........................28-124, 28-127, 28-158删除文件 ......................................................20-125上传到外部存储器 ...............................32-36, 32-42闪烁，设置 .......................................................8-46设备访问API .....................................37-88, 37-168设备监控 .........................................................A-43设备支持的功能列表 ..........................................1-5声音选项 ........................................................10-50时间，调节 ..............................................34-1, 34-3时间表 ...................................................22-1, 22-10实时视频 ..........................................................26-8矢量字体 ............................................................6-3使用逻辑 ..........................................................28-3使用其他语言绘制 ...........................................A-72事件记录器 ..........................................26-22, 26-86视频 ..................................................................26-1故障前后 .................................................26-20录制 ..........................................................26-1视频控制区，使用示例 .................................26-133首选设置 ........................................................5-165输出文件列表 ...............................................20-123输入启用 .................................14-52, 14-55, 14-82顺序 ........................................................14-31许可 ........................................................14-85输入代码表 .......................................................8-93输入设备设置 .................................................16-24输入顺序功能 ...............................................14-105属性 ...............................................................5-117属性，更改 .......................................................8-31数据显示 ..........................................................14-1保存模式 ...............................................20-110比较 ........................................................10-16写 ............................................................10-10范围，防止输入超出允许范围的数据 ......14-28更改值 .....................................................14-34缓冲器到内部寄存器 .............................20-153加 ............................................................10-13减 ............................................................10-13输入 ..........................................................14-1数据显示器 .....................................................14-38数据采样 ..........................................................23-1数据块显示显示/清除图表 .......................................18-27数据块显示图结构 ..........................................18-71数据块，复制 .................................................20-12数字显示 ........................................................14-40搜索存储器 .....................................................20-84缩放框 ..............................................................5-86索引文件 ......................................................24-100 TTFT真彩LCD ..................................................8-39 Time-Base .....................................................14-65特殊继电器 .............................................A-20, A-35特殊数据显示器 .............................................24-72替换 .................................................................5-73条形码阅读器 ................................16-2, 16-4, 16-5条件表达式 ...................................................20-136分支计算示例 ........................................20-164条件表达式 .....................................................20-45条件操作 ........................................................24-91条件名称查找功能 ..........................................24-99调色板 ..............................................................8-42调试 .................................................................33-4调试函数 ......................................................20-131停止通讯 ..........................................................7-11通讯错误代码 ..................................................A-22概述 ...........................................................A-2周期时间 ..................................................A-22通讯状态，确认 ...............................................7-13通过USB电缆传输 ..........................................32-5通过以太网(LAN)传输 ..................................32-12通用设置 .............................................5-112, 5-174统计数据显示器 .............................................14-95透明部件 .................................10-43, 14-39, 18-29图形 ...................................................................8-6图像字体 ..........................................................6-14图案，设置 .......................................................8-48图表部件设置 .................................................18-29历史趋势 .................................................18-45普通 ........................................................18-30数据块显示 ..............................................18-67统计 ........................................................18-39仪表 ........................................................18-41图片显示器 ..........................................9-22, 19-147图片注册 ..........................................................9-20退出WinGP ...................................................37-26 UUltra VNC服务器，RPA .................................35-7 USB存储器 .........................................5-188, 5-189保存注意事项 ........................................23-143 USB存储器，保存至注意事项 .................................................19-61 USB存储器操作说明 ...................................23-144 V 2003 程序 .........................................37-57 VNC服务器，RPA ..........................................35-7 WWindows XP Embedded ................................37-11 WinGP .............................................................37-2 API ..........................................................37-34 SDK ........................................................37-13 2003程序示例 ............................37-39 VB6程序示例 .........................................37-65读取VB中的文本 .................................37-119读取或写入数据 ......................................37-38禁止两次调用API .................................37-118启动 ........................................................37-26软件使用授权密钥码 .................................37-2运行应用 .................................................37-71专用API ..................................................37-56 WinGP，退出 ...............................................20-135外围控制器列表 ..............................................5-157网格，设置 .......................................................8-69位逻辑系统变量 ...............................................A-90位运算示例 ...................................................20-163位置点，显示 ...................................................9-48位状态16 ............................................................13-135 ................................................................13-8文本显示区 ..............................17-62, 17-63, 17-64表设置 .....................................................17-51操作 ......................................................20-146运算错误状态 ........................................20-154注册 ........................................................17-49文本显示器 .....................................................14-77文本报警 ......................................................19-140文本列表 ......................17-15, 17-24, 17-31, 17-36文本设置 ..........................................................8-94文本数据模式 .................................................5-161文件管理器简介 ........................................................24-86文件名，更改 ...............................................20-116。

PGP Desktop的使用安装完成PGP Desktop后，我们主要使用其两个功能对重要的文件进行加密，下文简单的讲讲（由于没有中文版，所以只能用英文版，请多多包涵）：首先看看PGP Desktop的主界面一．PGP Zip功能这个功能主要就是产生一个加密的zip文件只有加入在文件权限内用户才能打开；可以在需要传送加密的压缩文件的时候使用；点开PGP Zip菜单，可以看见三个选项：分别为：建立一个新的PGP Zip文件；校验历史，打开PGP Zip文件；1，建立一个新的PGP Zip文件点击New PGP Zip;出现窗口，把需要加密文件拖到窗口里点击下一步这里选Recipient keys,点击下一步；在这里选择需要打开这个文件的人的key也可以加入自己的key，点击下一步上面的Signing Key可以不填，下面选好保存的目录，点击下一步；这样，点击完成收到加密文件后，双击文件，在出现的密码对话框内输入自己的密码后，即可解开文件。

二．PGP Disk功能此功能可以在硬盘上建立一个虚拟的加密分区，可以把重要的文件存储在内，需要每次开机加载后，输入密码即可和普通硬盘一样访问。

打开PGP Disk的菜单可以看见两个选项点击New Virtual Disk;出现设置虚拟盘选项Name:给虚拟盘文件取一个名字，默认将以此名字保存虚拟盘文件，称为加密盘映像文件。

Disk File Location:保存虚拟盘文件的位置，最后不要在C盘。

建议选择D:\。

Mount as:把虚拟盘挂接上后的盘符，建议选一个靠后的盘附，如T:。

Mount at startup:开机就挂接上虚拟盘，*建议选上，这样每次启动输入密码后即可跟普通硬盘一样访问虚拟盘Unmount when inactive for xx mins:无访问下多久自动关闭虚拟盘，*选上上面选项后，建议此选项不要选择，否则设定时间没有访问，将自动关闭虚拟盘，再次访问需重新挂接。

目录DEMO工区数据说明 (1)演示数据说明 (1)演示工区地质背景 (1)分层体系说明 (1)第一部分工区准备 (2)概要 (2)1.1新建工区 (2)1.2打开工区 (3)1.3设置分层体系 (3)加载分层体系文件 (3)导出分层体系文件 (4)1.4数据加载 (4)数据表加载 (4)测井曲线加载 (5)1.5数据统计与处理 (7)数据关系 (7)数据统计与处理 (7)1.6数据检查与更正 (8)数据检查 (8)数据更正 (9)1.7数据浏览与编辑 (9)数据管理器 (10)1.8数据输出 (10)1.9工区数据说明 (11)数据类型 (11)数据组织 (12)1.10工区设置 (13)曲线类型设置 (13)测井曲线设置 (13)沉积微相设置 (14)符号设置 (14)参数设置 (16)分层界限符号设置 (16)平面图参数设置 (16)平面图曲线参数设置 (17)删除所有视图参数文件 (17)1.11数据表定义 (18)第二部分平面图 (19)概要 (19)2.1平面图的内容 (19)2.2平面图的开关 (19)2.3井位设置 (20)2.4井位查询 (20)2.5井位添加、删除 (20)2.6连井剖面 (21)2.7视图移动和放大 (22)2.8曲线的显示 (22)2.9加载曲线井的显示 (23)2.10连通井网 (23)第三部分解释项目 (24)概要 (24)3.1解释项目的内容 (24)3.2新建解释视图 (25)3.3解释视图设置 (25)3.4显示参数设置 (26)3.5曲线道设置 (28)3.6砂体解释 (30)3.7射孔解释 (31)3.8对比分层 (32)划分油层组 (32)对比小层 (33)对比单元 (34)对比断点 (36)3.9沉积微相解释 (36)3.10地层精细解释参数 (37)3.11砂体连通解释 (38)第四部分对比项目 (40)概要 (40)4.1对比项目的内容 (40)4.2新建对比视图 (40)4.3曲线道设置 (41)4.4对比分层 (41)划分油层组 (42)对比小层 (43)对比单元 (43)对比断点 (44)4.5连通解释 (45)第五部分成果输出 (48)概要 (48)5.1位图输出 (48)5.2射孔通知单 (48)5.3小层数据表 (49)5.4快速输出数据表 (51)5.5综合解释成果图 (52)Demo工区数据说明Demo工区位于GPTLog安装目录下(除非安装时指定其它安装目录，否则默认为C:\ProgramFiles\GPTSoft\GPTLog\Demo)。

第一章PGP（Tenore）系统的安装PGP（Power Generation Portal，以前称为Tenore）为Industrial IT Symphony系统的人系统接口（即操作员站）之一。

本章简要说明PGP 2.1软件的安装过程以及在安装完成后的初始设置。

关于PGP 2.1软件安装的详细过程可参考PGP 2.1软件的安装说明书。

1.1安装操作系统PGP 2.1软件的运行平台为:∙Windows NT Workstation /Server Version 4.0，并安装Service Pack 6或更新的Service Pack。

∙Windows 2000 Professional /Server Version 5.0，并安装Service Pack 2或更新的Service Pack。

因此，在安装PGP软件之前，操作系统应已成功安装，并能正常运行。

竭力推荐硬盘格式化为NTFS格式。

另外，在安装完操作系统后还应安装支持PGP运行的Microsoft Office 2000软件。

1.2安装MSXMLPGP 2.1用到了微软的XML相关的技术，因此，在安装PGP之前必须先安装MSXML。

其安装步骤如下：1) 在安装盘上找到msxml.msi文件，点击右键，选择Install开始安装。

2) 选择Next。

3) 选中“I accept the terms in the License Agreement”，点击Next。

4) 输入用户信息（Customer Information）。

5) 点击Install Now 按钮。

6) 点击Finish按钮。

1.3安装PGP软件1) 在安装盘上找到Setup.exe文件，双击开始安装。

2) 点击Next。

3) 在软件许可协议（Software License Agreement）窗口，点击Yes按钮。

4) 选择安装路径，缺省路径为“<系统盘>:\Program Files\ABB IndustrialIT\Inform IT\Tenore”。

GP1/GP2 INSTALLATION & MAINTENANCE INSTRUCTIONSDESCRIPTION / IDENTIFICATIONThe GP series control valve is an electronic pressure regu-lator designed to precisely control the pressure of gaseous media proportional to an electronic signal.The GP1 operates using two normally closed solenoid valves, a pressure sensor, and a control circuit. One valve is actuated to allow unregulated supply media into the sys-tem. The second valve is actuated to allow working media to vent to atmosphere. The pressure sensor provides feed-back to the control circuit. The control circuit comparesthe pressure sensor feedback to the user supplied electronic command signal and actuates the appropriate valve until the two signals match.The GP series can be teamed with a variety of one-to-one ratio high pressure volume boosters for even greater flow. When using a volume booster, the GP2 can be used toachieve accuracy similar to the GP1 alone with higher flow capacity.GP series product comes with a monitor output signal. This output is an electrical signal originating from the inter-nal sensor used in the control circuit of the GP1 valve. On GP2 units this signal originates from the external trans-ducer. This allows the system parameters to be monitored and provides a signal for data acquisition needs.The output of this signal can be configured to either 0-10Vdc or 4-20mA.The GP2 is similar to the GP1 but uses a double loop con-trol scheme. In addition to the internal pressure transducer, the GP2 also receives a 0-10Vdc feedback signal from an external sensing device. The external signal functions as the primary feedback and is compared to the command sig-nal. A difference between the two comparisons causes one of the two solenoid valves to open allowing flow in or out of the system.A Proportion-Air DSY or DSTY will work as a second loop feedback to the GP2 (See ordering information).The GP series has several other beneficial features. An on board split power supply allows true zero for command and monitor even though the GP is powered by a conventional single ended power supply. The GP utilizes advanced on board power management hardware to minimize current draw and heat build up. The GP also features status indi-cating LEDs for power and TTL. The TTL signal is a con-ditional on/off signal to use for diagnostic purposes. This signal is LOW when the pressure is within 1% of final set-ting.• Description & identification • General specifications • Connection procedure • Re-calibration procedure • Repair procedure•Dimensions, ordering and accessoriesBefore you get started, please read these warnings:♦ Examine the product. Ensure that you received what you ordered. ♦ Read this guide first before you start and save it for later use.♦ You must have a good understanding of what the adjustments are on this product before using them.♦All compressed air and power should be shut off before installing, removing or performing maintenance on this prod-uct.♦ Installation and use of this product should be under the supervision and control of properly qualified personnel inorder to avoid the risk of injury or death.e s y of C M A /F l o d y n e /H y d r a d y n e ▪ M o t i o n C o n t r o l ▪ H y d r a u l i c ▪ P n e u m a t i c ▪ E l e c t r i c a l ▪ M e c h a n i c a l ▪ (800) 426-5480 ▪ w w w .c m a f h .c o mGENERAL SPECIFICATIONS & PERFORMANCE CHARACTERISTICSELECTRICALMINIMUM TYPICAL MAXIMUM Supply Voltage Supply Current Command Signal VoltageCurrent Command Signal Impedance Voltage Current Analog Monitor Output Voltage Current (Sourcing) TTLSatisfied Not-Satisfied 2nd Loop Input 15VDC100mADC (standbystate) 0VDC 4mADC- - 0VDC 4mADC- - 0VDC - - - - 10K Ω 100Ω - - 0VDC 5VDC - 24VDC985mADC (operating)10VDC 20mADC- - 10VDC 20mADC- - 10VDCPNEUMATIC MINIMUM TYPICAL MAXIMUM Input PressurePressure Range Flow RateFiltration Required Accuracy (Pressure) Accuracy (Monitor) Hysteresis/Linearity Repeatability Port Size (all) Critical Volume VacuumVacuum 0 SCFM (0 m³/hr)40 micron ±0.1%F.S.- 0%F.S. - - - 110% of full scalecalibration-5 SCFM (8.5 m³/hr)20 micron ±0.25%F.S. ±0.3%F.S. ±0.2%F.S. ±0.05%F.S. 1/8 inch NPT female3 in³1100 psig (75.84 bar)1000 psi (68.95 bar) 10 SCFM (17 m³/hr)- ±0.5%F.S. ±0.5%F.S. ±0.5%F.S.Depends on Hysteresis- -(Note 1)(Note 2)(Note 3)(Note 4)PHYSICALMINIMUM TYPICALMAXIMUM Operating Temperature Environment Protection WeightElectrical Connector32ºF (0ºC)- - -- -3.75 lbs (1.75 kg)6 pin molded 16 gauge wire158ºF (70ºC) NEMA 4/IP65- -(Note 5) (Note 6)(Note 1) Pressure ranges are customer specified.(Note 2) Pressure range up to 250 PSI (17.24 BAR) may be ordered as PSIG or PSIA. Pressure range above 251 PSI (17.3 BAR) may be ordered as PSIS or PSIA.(Note 3) User adjustable(Note 4) The minimum downstream closed volume is determined by the pressure range, orifice size, hysteresis window, plumbing, aswell as other factors. Consult factory for small volume applications. (Note 5) CE approval pending(Note 6) Depends on density of manifold materialLINEARITY12345678910Command [Volts]0102030405060708090100P r e s s u r e [% o f s c a l e ]Fig 1Times for GP to fill/exhaust a closed chamber. Step command signal Fig 2% o f S c a l eTime (seconds)Volume = 5 cu.in. [82mL]e s y of C M A /F l o d y n e /H y d r a d y n e ▪ M o t i o n C o n t r o l ▪ H y d r a u l i c ▪ P n e u m a t i c ▪ E l e c t r i c a l ▪ M e c h a n i c a l ▪ (800) 426-5480 ▪ w w w .c m a f h .c o mGP CONNECTION PROCEDURE Electrical connections:1. Ensure all power is off before making any electricalconnections. 2. Figure 2 shows the location of the GP electrical con-nector and figure 3 shows the connector. Table 2 iden-tifies the color codes Note: Both current and voltage command units require that both the command (+) and command (–) pins be connected.3. See figure 4 and 5 for second loop connections.Pneumatic Connections:1. A typical 20 micron (minimum 40 micron) in-linefilter is recommended on the inlet of the GP. 2. Connect supply pressure to the “I” inlet port (figure 1)not to exceed rated supply pressure. (Table 1) 3. Connect one of the “O” outlet port (figure 1) to thedevice being controlled and plug the unused one. 4. Proceed with electrical connection.MAX calibrated pressure of:Max inlet pressure is:Vacuum up to 15 psig (Vac. to 1.03 bar) 30 psig (2.07 bar) 16 up to 30 psig (1.1 to 2.07 bar) 60 psig (4.14 bar) 31 up to 50 psig (2.14 to 2.45 bar) 100 psig (6.89 bar) 51 up to 100 psig (3.52 to 6.89 bar) 200 psig (13.79 bar) 101 up to 250 psig (6.96 to 17.24 bar) 500 psig (34.47 bar) 251 up to 500 psig (17.31 to 34.47 bar)600 psig (41.37 bar)501 up to 1000 psig (34.54 to 68.95 bar) 1100 psig (75.84 bar)TABLE 1RATED PRESSURE FOR GP VALVESTABLE 2WIRE COLOR*FUNCTION WHITE COMMAND (+) RED ANALOG OUTPUT GREEN DC COMMON ORANGE TTL OUT BLACK 15-24 VDC POWER BLUECOMMAND (-)e s y of C M A /F l o d y n e /H y d r a d y n e ▪ M o t i o n C o n t r o l ▪ H y d r a u l i c ▪ P n e u m a t i c ▪ E l e c t r i c a l ▪ M e c h a n i c a l ▪ (800) 426-5480 ▪ w w w .c m a f h .c o me s y of C M A /F l o d y n e /H y d r a d y n e ▪ M o t i o n C o n t r o l ▪ H y d r a u l i c ▪ P n e u m a t i c ▪ E l e c t r i c a l ▪ M e c h a n i c a l ▪ (800) 426-5480 ▪ w w w .c m a f h .c o mREPAIR PROCEDURE:1.) Disassemble GP unit:A. Remove the two 8-32 flat head screws and o’rings on the GP lid. Figure 7B. Unplug main connector wires and LED wires from the board. Figure 8C. Remove lid, lid o’ring and can assembly from manifold . Figure 9D. Unplug valve and sensor wires from board. Figure 8E. Remove the two 8-32 SHCS screws and o’rings from manifold to remove both the regular tall standoff and the boardstandoff. Figure 10F. Of each valve assembly, remove hex nuts and disassemble valve tube from coil and valve housing. (Keep coil washer,valve housing and hex nut because they are not included in the repair kit and can be reused) Figure 14G. Using span wrench (figure 11) , remove valve tube from manifold cavity.H. Remove poppet and o’ring spacer from manifold. See figure 12 for o’ring spacer location and figure 14 for valve ori-entationI. If sensor needs to be replaced, unthread sensor from manifold. See figure 13 for sensor locationFIGURE 10FIGURE 8LEDesyofCMA/Flodyne/Hydradyne▪MotionControl▪Hydraulic▪Pneumatic▪Electrical▪Mechanical▪(8)426-548▪www.cmafh.comFIGURE 14e s y of C M A /F l o d y n e /H y d r a d y n e ▪ M o t i o n C o n t r o l ▪ H y d r a u l i c ▪ P n e u m a t i c ▪ E l e c t r i c a l ▪ M e c h a n i c a l ▪ (800) 426-5480 ▪ w w w .c m a f h .c o mPROPORTION-AIR, INC. BOX 218 MCCORDSVILLE, IN USA 46055PHONE: (317)335-2602 FAX: (317)335-3853Proportion-Air products are warranted to the original purchaser only against defects in material or workmanship for one (1) year from the date of manufac-ture. The extent of Proportion-Air's liability under this warranty is limited to repair or replacement of the defective unit at Proportion-Air's option. Pro-portion-Air shall have no liability under this warranty where improper installation or filtration occurred.All specifications are subject to change without notice. THIS WARRANTY IS GIVEN IN LIEU OF, AND BUYER HEREBY EXPRESSLYWAIVES, WARRANTIES OR LIABILITIES, EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY OBLI-GATION OF PROPORTION-AIR WITH REGARD TO CONSEQUENTIAL DAMAGES, WARRANTIES OF MERCHANTABILITY, DE-SCRIPTION, AND FITNESS FOR A PARTICULAR PURPOSE.............................................................................................................................................................................................................WARNING: Installation and use of this product should be under the supervision and control of properly qualified personnel in order to avoid the risk of injury or death.e s y of C M A /F l o d y n e /H y d r a d y n e ▪ M o t i o n C o n t r o l ▪ H y d r a u l i c ▪ P n e u m a t i c ▪ E l e c t r i c a l ▪ M e c h a n i c a l ▪ (800) 426-5480 ▪ w w w .c m a f h .c o m。