SDC Ultra 简明使用指南

Imaging Modalities
①Computed Radiography
②Digital Radiography
Electronic Medical Records /电子病例记录
Practice Management Software
NetPractice Practice Management System（未进中国）
Cement Mixers /骨水泥搅拌器
①Mixevac III /先锋骨水泥搅拌器
②Revolution / Revolution骨水泥搅拌注射系统
③ACM Bone Cement Mixer / ACM骨水泥搅拌器
Pulsed Irrigation /脉冲冲洗
Surgical Lighting /手术灯
①Visum LED Surgical Light / Visum LED手术灯
②Visum 600 Surgical Light / Visum 600手术灯
③Visum 450 Surgical Light / Visum 450手术灯
④Visum 300 Examination Light (Floor Standing) / Visum 300检查灯(地轴架)
①Navigation System II /第二代外科手术导航系统
②eNlite Navigation System / eNlite手术导航系统
③NavSuite /导航手术室
Surgical Navigation Software and Instrumentation /外科手术导航系统软件及工具
二、OR Equipment and Telemedicine /手术室设备及远程医疗

數字顯示調節器 使用說明書
SDC15/25/26/35/36 用用智能編程軟件包SLP-C35 資料編號 CP-UM-5290C
與智能編程軟件包同包裝。 本書是關於使用計算機進行SDC15/25/26/35/36各種設定的軟件的說明 書。請使用SDC15/25/35/36進行裝置設計、設定的人員，務必閱讀。介紹 了安裝在計算機上的方法、操作、各種功能、設定方法。
本符號顯示使用上必須“注意”的內容。
本符號顯示必須“禁止”的內容。
本符號顯示必須執行的“指示”內容。
ⅱ
警告
請勿分解本機。 否則有觸電、發生故障的危險。 本機在安裝、拆除及配線作業時，務必在切斷供給電源後進行。否則有 觸電的危險。 請勿觸摸電源端子等帶電部件。 否則有觸電的危險。
注意
請在規格書中記載的使用條件（溫度、濕度、電壓、振動、衝擊、安裝方向、 環境等）範圍內使用本機。 否則有發生火災、故障的危險。 請勿堵塞本機的通風孔。 否則有發生火災、故障的危險。 請按照本機連線的標準、指定電源及施工方法，正確配線。 否則有發生火災、故障的危險。 請勿讓斷線頭、鐵粉、水等進入機箱內。 否則有發生火災、故障的危險。 請按規格書中記載的扭矩擰緊端子螺釘，端子螺釘沒有擰緊時有觸電、發生 火災的危險。 請勿把本機中未使用的端子作爲中繼端子使用。 否則有觸電，發生火災、故障的危險。 本機是盤安裝型的場合，在輸線完畢後，推薦安裝端子蓋板。 否則有觸電的危險。（本機備有另售的端子蓋。） 請在規格書中記載的壽命範圍內使用本機的繼電器。超過使用壽命仍繼續使 用，有發生火災、故障的危險。 有發生雷電湧危險的場合，請使用本公司生産的電湧放電器。 否則有發生火災、故障的危險。 請勿錯誤配線。 錯誤配線，有導致機器發生故障的危險。 輸通電源後，約6秒鐘調節器無動作。 在調節器的繼電器輸出作爲連鎖信號使用的場合，請注意。

DUal MODe vital SiGNS MONitOrSimple, Flexible vital Signs MonitoringThe Ultraview DM3 combines the simplistic performance of a spot-check monitor with the sophistication of continuous monitoring, providing caregivers with a versatile solution for accurately and efficiently monitoring basic vital signs on adult and pediatric patients (excluding neonates).SPOT mode – collect batch readings during rounds and upload via iCS Hl7 interface for review and documentation within an electronic charting system.Single solution for variable acuity.imagine the convenience of being able to adapt to changes in patient condition without having to locate additional equipment.During rounds, SPOT mode complements clinical workflow to facilitate easy measurement, collection and transmission of patient data to the eMr. in addition to measuring basic vitals, caregivers can manually enter supplemental information. and with the Ultraview DM3’s patentedrespiration tap Pad, caregivers can focus on the patient’s breathing pattern, leaving the monitor to calculate and store the patient’s respiration rate.in instances where more vigilance is needed, theUltraview DM3 can be put into MON mode for continuous monitoring and alarm support. and following a procedure, caregivers can easily initiate an automatic interval ofblood pressure readings based on unit protocol.Supplemental Data Inputs (in spot-check mode)• Respiration(via tap Pad or manually)• Pain score (0 to 10)• Patient position• Site-check (post-procedure)•Caregiver IDMON mode – continuously monitor vital signs with local alarm support when a higher acuity solution is needed.the Ultraview DM3’s color touchscreen display provides a clean, elegant presentation of patient data. Clearly labeled graphic keys allow quick initiation and entry of measured vitals. And using a properly configured USB barcode scanner, the Ultraview DM3 provides quick and accurate entry of patient identification.Parameter Capabilitiesthe Ultraview DM3 supports measurement of SpO 2, pulse rate, NIBP and temperature, and can be used in any patient care environment where basic vital signs monitoring is needed. in-hospital settings include MedSurg, triage (e.D.), general care; outpatient settings include urgent care centers and outpatient/same-day surgery.SpO 2• Spacelabs SpO 2 with signal quality indicator • Continuous waveform display in MON mode • Compatible for use with a variety of adult and pediatric sensorsPulse Rate• Automatically sourced from SpO 2•Alternately sourced from NIBPNIBP• Blood pressure measurements in ~ 30 seconds • Multiple measurement modes: - Stat- interval (q minute)- Three custom intervals configurable by hospital protocol TEMP• IVAC predictive temperature algorithms- Oral readings in ~ 7 seconds using TurboTemp ® - Axillary readings in ~ 21 seconds using Tri-Site ® - Manual entry if measured from an alternate sourceSpacelabs Healthcare Company Headquarters 5150 220th Ave. SE, Issaquah, WA 98029PO Box 7018, Issaquah, WA 98027-7018Telephone: +1 425-657-7200In North America: +1 800-522-7025Fax: +1 425-657-7212© 2010 Spacelabs HealthcareSpecifications subject to change without notice. All brands and product names are trademarks of their respective owners.Product may not be available in all locations. Check with your local Spacelabs representative.M1101-ap10Rollstand – the DM3 rollstand’s small footprint complements the monitor’s low-profile design, allowing for use and storage in the smallest of spaces.Supplies and AccessoriesHigh-quality supplies and accessories are important for monitoring system performance as well as for economical and efficient patient care. all Spacelabs supplies and accessories are carefully designed and tested to guarantee optimal system performance.Spacelabs Healthcare offers the following:• SpO 2 cables and sensors • NIBP hoses and cuffs• Temperature probes and disposable probe coversService and Supportthe Ultraview DM3 includes a starter kit of patient supplies and a fully charged battery, providing immediate use out of the box.every monitor comes with a standard two-year warranty and is backed by Spacelabs’ award-winning support services, including helpful 24x7 phone support, quick depot repair and readily available, value-priced replacement parts.Wall Mount – the DM3 wall mount allows for dedicated use in the room while saving floor space around the bed. the mounting arm can be ordered separately and installed on an existing GCX wall channel.。

StoreJet™ 35 Ultra使用手册(Ver1.0.5)目录产品介绍︱ (3)包装内容︱ (3)产品特色︱ (4)系统需求︱ (4)安全注意事项︱ (5)一般使用 (5)设定 (5)资料备份 (5)电源 (5)提醒您 (5)产品概观︱ (6)安装硬盘︱ (7)将StoreJet 35 Ultra连接到计算机︱ (9)Windows®2000/XP (9)Windows Vista™ (10)Mac® OS (11)Linux® (11)安全删除StoreJet 35 Ultra︱ (12)Windows® 2000, XP and VISTA™ (USB) (12)Windows® 2000, XP and VISTA™ (eSATA) (12)Mac® OS (USB & eSATA) (14)Linux® Kernel 2.4或更新版本 (USB) (14)格式化硬盘︱ (15)Windows®2000/XP (15)Windows Vista™ (16)Mac® OS (18)Linux® (20)疑难排解︱ (21)疑难排解︱ (21)产品规格︱ (23)订购信息︱ (23)质保条款︱ (24)产品介绍︱感谢您购买创见StoreJet™ 35 Ultra硬盘外接盒。

本产品支持eSATA/USB2.0双接口规格，USB接口兼容于大多数的台式或笔记型计算机，eSATA接口则可提供每秒高达3.0Gb的传输速率，让硬盘效能达到极致。

此外，StoreJet 35 Ultra更配备超静音80mm 风扇，可有效降低硬盘过热的风险；本产品还附赠实用的备份软件，可进一步协助使用者提升工作效率*。

加装硬盘后，StoreJet 35 Ultra即成为绝佳的数据管理储存装置，可用来下载、储存、传输并备份宝贵的档案与数据。