下载文档原格式
PROJECT:REPRESENTATIVE:ENGINEER:CONTRACTOR:UNIT TAG:TYPE OF SERVICE:SUBMITTED BY:APPROVED BY:ORDER NO.:QUANTITY:日期:日期:日期:注意！产品图片可能与实际产品不同CR 20-17立式多级离心泵HP2NPSH [米]5152043143524 x13.513017690G 1/2300G 1/2G 1/2215256652012516518.112044565465454a654544a910a 8102718100373765525676626b 26c 64c 64b 44b 64d 47a 64a6426a 369603838a8022849c 49113105625161材料:泵壳:铸铁EN-JL1030ASTM A48-30 B 叶轮:不锈钢DIN W.-Nr. 1.4301AISI 304材料代码:A 橡胶代码:E传真:-日期:-位置号数量描述1CR 20-17 A-F-A-E-HQQE注意！产品图片可能与实际产品不同产品号码:96500337吸入和排泄口在同一高度（平齐）的多级立式离心泵可方便地安装到水平的单管系统中。
水泵扬程和基座使用铸铁制造，所有其它与液体接触的部件为不锈钢制造。
吸入和排泄口在同一高度（平齐）的多级立式离心泵可方便地安装到水平的单管系统中。
电能是通过夹壳式联轴器传输的。
管道的连接是通过 DIN 法兰实现的。
水泵上安装了一台 3 相位带冷却扇的异步电动机。
更多的产品信息该产品贴有格兰富 Blueflux 标签。
它代表格兰富的顶尖产品——带高能效电机和变频功能。
格兰富 Blueflux 系列解决方案达到或超过了 EuP IE3 等法规规定的质量水平。
钢制、铸铁和铝制部件表面有一层由阴极电极沉积（CED）工艺形成的环氧树脂涂料。
CED 是一种高质量浸漆涂覆工艺，通过在工件周围形成电场让工件的表面沉积一层薄而均匀的油漆颗粒。
奥林燃烧器说明书(总51页) -CAL-FENGHAI.-(YICAI)-Company One1-CAL-本页仅作为文档封面，使用请直接删除操作和维护说明书 燃气燃烧器GP-130 H GP-130 T GP-140 H GP-140 T GP-150 H GP-150 TOILON OYFIN-15801 LAHTI FINLAND +358-3-85 761 FAX +358-3-857 623940119817GB目录1. 本书常用语................................................................................................. (1)2. 概述................................................................................................. (2)3. 燃烧器技术参数................................................................................................. (4)4. 燃烧器的安装 ................................................................................................ (6)4.1. 燃烧器的安装....................................................................................................... (6)4.2. 铰接燃烧器外壳 ...................................................................................................... (6)4.3. 电路连接 ...................................................................................................... (6)4.4. 供气管路安装示例....................................................................................................... (6)4.5. 气压调节装置....................................................................................................... (8)5. 燃烧器运行................................................................................................. (9)5.1. 二段式燃烧器(”H”型) .......................................................................................... (9)5.2. 三段式燃烧器(”T”型) .......................................................................................... (12)6. 燃烧器自动控制................................................................................................. (14)6.1. 时序图, ”H”型 ........................................................................................... (14)6.2. 运行 ........................................................................................... (15)6.3. 时序控制图, ”T”型 ........................................................................................... (17)6.4.运行 ................................................................................................................................... 18 7. 燃烧器的调节 ........ ........... ........... ........... ........... ........... ........... ........... ........... ........... ........... (21)7.1.负荷调节 ............................................. (21)气阀(连体) MB-ZRDLE, 二段式燃烧器(”H”型) (21)连体阀 ZRDLE, 二段式燃烧器(”H”型) (22)三段火燃烧器(“T”型) ..................................................................................... (23)7.2. 燃烧空气调节，可调凸轮 ........................................................................................... (24)7.3. 燃烧空气调节............................................................................................ (25)二段火燃烧器(”H”型) ..................................................................................... (25)三段式燃烧器(”T”型)...................................................................................... (26)7.4. 燃烧头调节............................................................................................ (27)7.5. 燃烧头拆卸 (29)和 GP-140 H/T (29) (30)7.6. 拆卸气体喷嘴 (31)7.7. 燃烧器马达更换说明 (32)7.8. 安装控制设备 (33)7.9. 压力开关 (33)气体压力开关 (33)空气压差开关 (34)8. 开关面板 (35)9. 气体检漏器 (36)9.1. VPS 504 (36)9.2. VDK 200 A S02 (37)运行 (37)安装 (38)电路连接 (38)管子连接点 (38)9.2.5. 技术参数 (38)10. 控制装置 LFL1.322 (39)10.1. 内部回路 (39)10.2. 主程序图 (40)10.3. 失效状态及锁定指示控制程序 (41)40119817GB10.4. 火焰探测器QRA..的探测电流和连接 (42)10.5. 技术参数 (42)11. 维修... (43)12. 失效状态及程序 (44)13. 说明... (47)40119817GB1. 本书常用语 1在安装、使用和维修燃烧器之前，先认真阅读说明，对于指定的说明，心须遵守。
80% Single Stage Heating FurnaceEASIER TO SELLS 80% AFUES Flame roll −out sensors standard S Category I venting S Blocked vent switch S Louvered doorS 24 VAC humidifier terminal S Electronic air cleaner terminal S R8MXL California NOx approvedS Certified to leak 2 percent or less of nominal air conditioning CFMdelivered when pressurized to 1-inch Water Gauge with all present air inlets, air outlets, and condensate drain port(s) sealedTOUGHERS ECM blower motorS Adjustable heating blower OFF delay S Factory set blower ON delayS RPJ aluminized steel heat exchangerS High temperature limit control prevents overheating S Direct ignition with Silicon Nitride ignitor S One piece prepainted steel cabinetQUIETERS In −shot burnersEASIER TO INSTALL AND SERVICES 33 1/3” (847mm) high, for ease of installationS Innovative knobs for easy door removal and secure attachment S Factory shipped for natural gas, with propanegas conversion kits availableS Four position − upflow/downflow/horizontal (left/right) installation S Three position inducer elbow capability S Through the casing flue pipe for counterflow applications S Common venting with other Category I appliances S Masonry chimney adapter available S Self diagnosticsS Slide out blower assembly WARRANTY *S 20 year heat exchanger limited warrantyS 10 year parts limited warranty with timely registrationS 5 year parts limited warranty if not registered within 90 days of original installationIllustrations and photographs are only representative.Some product models may vary.Use of the AHRI Certified TM Mark indicates amanufacturer’s participation in the program. Forverification of certification for individual products,go to .*For residential applications only. See warranty certificate for complete details and restrictions, includingwarranty coverage for other applications.Model Size Input (MBTUH)Efficiency AFUE Cooling Capacity CFM range@ .5 in. w.c. (125 Pa)Dimensions H x W x D Inches (Millimeters)Shipping Wt.Lbs (Kg)R8MXL 045141244,00080%415 − 108033−1/3 x 14−3/16 x 29 (847 x 360 x 737)104 (47)R8MXL 070171266,00080%385 − 100533−1/3 x 17−1/2 x 29 (847 x 445 x 737)126 (57)R8MXL 070171666,00080%875 − 143533−1/3 x 17−1/2 x 29 (847 x 445 x 737)126 (57)R8MXL 090171488,00080%750 − 121033−1/3 x 17−1/2 x 29 (847 x 445 x 737)127 (58)R8MXL 090211688,00080%845 − 144533−1/3 x 21 x 29 (847 x 533 x 737)140 (64)R8MXL 1102120110,00080%990 − 204033−1/3 x 21 x 29 (847 x 533 x 737)152 (69)R8MXL1352420132,00080%1025 − 181033−1/3 x 24−1/2 x 29 (847 x 622 x 737)163 (74)R8MXLProduct SpecificationsMODEL NUMBER IDENTIFICATION GUIDEDIGIT POSITION 123456,7,89,1011,121314R8M X L0451412A1 R = Non−Branded8 = 80% AFUE EFFICIENCYM = Multiposition POSITIONV = Variable Speed Blower Motor − ECMX = ECM Blower MotorS = Single−stageT = Two−stage TYPEN = StandardL = Low NOx FEATURE045 = 44,000 BTU/hr070 = 66,000 BTU/hr090 = 88,000 BTU/hr110 = 110,000 BTU/hr HEAT INPUT14 = 14−3/16”17 = 17−1/2”21 = 21”24 = 24−1/2”CABINET WIDTH12 = 1200 CFM (max)14 = 1400 CFM (max)20 = 2000 CFM (max)22 = 2200 CFM (max)NOMINAL MAXIMUM COOLING AIRFLOW @ .5 IN.W.C.SALES (MAJOR) REVISION DIGITENGINEERING (MINOR) REVISION DIGITACCESSORIES PART NUMBER IDENTIFICATION GUIDEDIGIT POSITION12345, 6, 78, 910, 11N A H A00101DH N = Non−Branded BRANDINGA = Accessory PRODUCT GROUPH = Heating KIT USAGEA = OriginalB = 2nd GenerationC = 3rd Generation MAJOR SERIESProduct Identifier NumberPackage QuantityType of Kit (Example: DH = Draft Hood − Chimney Adapter)SPECIFICATIONSNATURAL GAS0451412A0701712A0701716A0901714A0902116A1102120A1352420AINPUT BTUH*Upflow44,00066,00066,00088,00088,000110,000132,000 Hz/Downflow42,00063,00063,00084,00084,000105,000126,000OUTPUT CAPACITY BTUH* (Nonweatherized ICS) †Upflow36,00054,00054,00071,00072,00090,000107,000 Hz/Downflow34,00051,00051,00068,00068,00085,000102,000AFUE † *NonweatherizedICS80.080.080.080.080.080.080.0 ELECTRICALTRANSFORMER (24 volt)40 VACERTIFIED TEMP RISE RANGE −_F (_C)30−60(17−33)35−65(19−36)25−55(14−31)40−70(22−39)35−65(19−36)30−60(17−33)40−70(22−39)CERTIFIED EXT STATIC PRESSURE Heating.10.12.12.15.15.20.20 Cooling.50.50.50.50.50.50.50AIRFLOW CFM‡Heating71098212051203141818901760 Cooling1080100514351210144520401810CONTROLSLIMIT CONTROL SPSTHEATING BLOWER CONTROL Solid−State Time OperationBURNERS (Monoport)2334456 GAS CONNECTION SIZE1/2 inch NPTGAS CONTROLSGAS VALVE (Redundant)Manufacturer White−RodgersMinimum Inlet Pressure (in. w.c.) 4.5 (Natural Gas)Maximum Inlet Pressure (in. w.c.)13.6 (Natural Gas)IGNITION DEVICE Hot SurfaceBLOWER PERFORMANCE DATACOOLING CAPACITY CFM range(.5 in. w.c.)430 − 1080385 − 1005875 − 1435750 − 1210845 − 1445990 − 20401025 − 1810 DIRECT-DRIVE MOTOR Hp (ECM)1/31/33/41/21/213/4 MOTOR FULL LOAD AMPS 4.4 4.48.8 6.8 6.811.58.8 RPM (Nominal) – Speeds1050−51050−51050−51050−51050−51050−51050−5BLOWER WHEEL DIAMETER WIDTHS − in (mm)10 x 6 (254152)11 x 8(279 x 203)11 x 8(279 x 203)11 x 8(279 x 203)10 x 10(254 x 25411 x 11(279 x 27911 x 11(279 x 279FILTER ARRANGEMENT External Filter Rack Required*Gas input ratings are certified for elevations to 2000 ft. (609.6 m) For elevations about 2000 ft. (609.6 m), reduce ratings 4% for each 1000 ft. (304.8m) above sea level. Refer to National Fuel Gas Code Table F4 or Furnace Installation Instructions. In Canada, derate the unit 10% for elevations 2000 ft. (609.6 m) to 4500 ft. (1371.6 m) above sea level.†Capacity in accordance with U.S. Government DOE test procedures.‡Airflow shown is for bottom only return-air supply for the as-shipped speed tap. For air delivery above 1800 CFM, see Air Delivery table for other options. A filter is required for each return air supply. An airflow reduction of up to 7% may occur when using the factory specified 4-5/16 inch (109.5 mm) wide, high efficiency media filter.** Time delay type is recommended.ICS Isolated Combustion SystemN/A Not ApplicableELECTRICAL DATAFURNACE MODEL Volts−Hertz−PhaseOperatingVoltage* RangeMaximum UnitAmpsUnitAmpacity#Minimum WireSize AWGMaximum WireLength‡ft (m)Maximum Fuseor CKT BKR†Amps MaximumMini-mum0451412115−60−1127104 5.67.814.047.0(14.3)15.0 0701712115−60−1127104 5.67.814.047.0(14.3)15.0 0701716115−60−112710410.013.314.027.0(8.2)15.0 0901714115−60−11271048.211.014.033.0(10.1)15.0 0902116115−60−11271048.211.014.033.0(10.1)15.0 1102120115−60−112710413.417.412.033.0(10.1)20.0 1352420115−60−112710410.714.014.026.0(7.9)15.0 * Permissible limits of the voltage range at which the unit operates satisfactorily.{ Time−delay type is recommended.}Length shown is as measured 1 way along wire path between unit and service panel for maximum 2 percent voltage drop.R8MXLA B C DVENTCONNECTIONSIZESHIP WTLB (KG) CABINET WIDTHIN (MM)OUTLET WIDTHIN (MM)TOP AND BOTTOMOUTLETIN (MM)BOTTOM INLETWIDTHIN (MM)0451412A14−3/16 (360)12−9/16 (319)9−5/16 (237)12−11/16 (322)4104 (47) 0701712A17−1/2 (445)15−7/8 (403)11−9/16 (294)16−1/8 (410)4126 (57) 0701716A17−1/2 (445)15−7/8 (403)11−9/16 (294)16−1/8 (410)4126 (57) 0901714A17−1/2 (445)15−7/8 (403)11−9/16 (294)16−1/8 (410)4127 (58) 0902116A21 (533)19−3/8 (492)13−5/16 (338)19−1/2 (495)4140 (64) 1102120A21 (533)19−3/8 (492)13−5/16 (338)19−1/2 (495)4152 (69) 1352420A24−1/2 (622)22−7/8 (581)15−1/16 (383)23 (584) 4 {163 (74) {135 Btu/h size furnaces require 5 inch (127 mm) vents. Use a 4-5 inch (102-127 mm) vent adaptor between furnace and vent stack.See installation instructions for complete installation requirements.Venting notes1.For common vent, vent connector sizing and vent material: United States, use the latest edition of the National Fuel Gas Code(NFGC).2.Immediately increase to 5 inch (127mm) vent connector outside furnace casing when 5 inch (127mm) vent connector required,refer to Note 1.3.Side outlet vent for upflow and downflow installations must use Type B vent immediately after exiting the furnace, except when theDownflow Vent Guard Kit is used in downflow position.4.Type B vent where required, refer to Note 1.5.4 inch (102 mm) single−wall (26 ga. min.) vent must be used inside furnace casing and when the Downflow Vent Guard Kit is usedexternal to the furnace.6.Accessory Downflow Vent Guard Kit, required in downflow installations with lower vent configuration.7.Chimney Adapter Kit may be required for exterior masonry chimney applications. Refer to Chimney Adapter Kit for sizing andcomplete application details.8.Secure vent connector to furnace elbow with two (2) corrosion−resistant sheet metal screws, space approximately 180° apart.9.Secure all other single wall vent connector joints with three (3) corrosion−resistant screws spaced approximately 120° apart. secureType B vent connectors per vent connector manufacturer’s recommendations.MINIMUM CLEARANCES TO COMBUSTIBLE MATERIALS FOR ALL UNITSThis forced air furnace is equipped for use with natural gas ataltitudes 0 − 10,000 ft (0 − 3,050m).An accessory kit, supplied by the manufacturer, shall be used toconvert to propane gas use or may be required for some naturalgas applications.This furnace is for indoor installation in a building constructed onsite.The furnace may be installed on combustible flooring in alcove orcloset at minimum clearance as indicated by the diagram fromcombustible material.This furnace may be used with a Type B−1 Vent and may be ventedin common with other gas fired appliances.This furnace is approved for UPFLOW, DOWNFLOW, andHORIZONTAL installations.Downflow Positions:{Installation on non−combustible floors only.For Installation on combustible flooring only when installed onspecial base or coil assembly.18 inch front clearance required for alcove.*Indicate supply or return sides when furnace is in the horizontalposition. Line contact only permissible between lines formed byintersections of the Top and two Sides of the furnace jacket, andbuilding joists, studs or framing.AIR DELIVERY − CFM (with filter)*UNIT SIZE WIRE-LEADCOLORSPEEDTest Airflow Delivery @ Various External Static Pressures (in. w.c.)0.10.20.30.40.50.60.70.80.910451412Gray51230119011551120108010451010975935895 Yellow4980945920890855815770735690645 Orange3770720685640600560520475430385 Blue2710660620580540490455415375335 Red1600540500455415385345305235−−0701712Gray511851140109510551005960915865820780 Yellow41000940895850800750695650600555 Blue3990935895845790740690640590535 Orange2855775720660605560495435385335 Red1860685515445385340275205−−−−0701716Gray51610156515251475143513951350130512601215 Yellow4138513351290125012051165112510751025980 Blue312151165112010751035985940895845840 Orange21175113010851035990945900855805760 Red1108010159559208758207807256706200901714Gray5135513201285124512101165112510801025815 Yellow412951255122011851140110010551005955815 Blue3122011851150110510651025975915840740 Orange21030985940900845790715655590535 Red 1 39459058558007506706005404904350902116Gray5162515801535149014451395134012601135995 Blue4144013951350130512551200114510901040950 Yellow3142513801335129012351185112510751020940 Orange212601210116011051050990935880820755 Red 1 3109510409809058457807206505855201102120Gray52255220521502100204019851920183517351615 Yellow41600152514651400133512751210115010801015 Blue31945189018301770171516551600154514801430 Orange21420134012801200114010651005925865790 Red112801205114010559909108407606956301352420Gray52065200519401875181017401670160015301470 Blue41825176016951630156014901420135012751205 Yellow31760169016251555148514151345127512001130 Orange2162015501480140513351260119511301065995 Red 1 313251260118511001025955885805735670NOTES:1.A filter is required for each return−air inlet. Airflow performance includes a 3/4 in. (19 mm) washable filter media such ascontained in factory−authorized accessory filter rack. See accessory list. To determine airflow performance without this filter, assume an additional 0.1 in. W.C. available external static pressure.2.ADJUST THE BLOWER SPEED TAPS AS NECESSARY FOR THE PROPER AIR TEMPERATURE RISE FOR EACHINSTALLATION.3.Highlighted areas indicate airflow range is beyond the range allowed for heating. THESE AIRFLOW RANGES MAY ONLY BEUSED FOR COOLING.−− Indicates unstable operating conditions.ACCESSORIESPART NUMBER DESCRIPTION0451412070171207017160701714090211611021201352420NAHB00501FF External Bottom Filter Rack, 14inch (14 x 25 inch washable filter included)XNAHB00601FF External Bottom Filter Rack, 17inch (16 x 25 inch washable filterincluded)X X XNAHB00701FF External Bottom Filter Rack, 21inch (20 x 25 inch washable filterincluded)X XNAHB00801FF External Bottom Filter Rack, 24inch (24 x 25 inch washable filterincludedXNAHA00506FB†Washable filter, 1 inch 16 x 25(6 pack)X X X XNAHA00706FB Washable filter, 1 inch 24 x 25(6 pack)X X XNAHA01001FF Side Filter Rack 16 x 25 (not ad-justable)X X X X X X XNAHA01006FF Side Filter Racks 16 x 25 (6 pack)X X X X X X XNAHA01101SB Combustible Floor Base (Notrequired when evaporator coilcase is used for downflow)X X X X X X XNAHB00301VC Downflow Vent Guard (Not re-quired when vent is routedthrough cabinet)X X X X X X XNAHA00401DH Chimney Adapter Kit 4−in. vent X X X X X XNAHA00301DH Chimney Adapter Kit 5−in. vent XNAHD00901LP*Natural−to−Propane ConversionKitX X X X X X XNAHD00901NG*Propane−to−Natural ConversionKitX X X X X X XX Accessory available†Suitable for side return filter rack and 17 inch external bottom filter rack.Copyright 2015 International Comfort ProductsLewisburg, Tennessee 37091 USA。
1070.7502/03-E N / © K S B S e r v i c e G m b H , F r a n k e n t h a l 2021 / S u b j e c t t o t e c h n i c a l m o d i f i c a t i o n w i t h o u t p r i o r n o t i c e .- 1 of 2 -Specification 2Laser Alignment and Commissioning: Standardised Pumps, Heat Transfer Fluid Pumps, Hot Water Pumps,High-pressure Pumps, Mag-drive Pumps, Hygienic PumpsType series:Etachrom L, Etachrom NC, Etanorm, Etanorm-R, Etanorm SYT, Etaprime L, HPK, HPK-L,KWP, Magnochem, MegaCPK, Multitec A / B / C / D, RPH, Sewatec, Vitacast, Vitalobe Mat. No.:01738234, 01738235, 01738236, 01738238Scope of services1Required alignment parts are invoiced separately.2For hot alignment, additional costs may be incurred by waiting times, etc.Specification of Services1070.7502/03-E N / © K S B S e r v i c e G m b H , F r a n k e n t h a l 2021 / S u b j e c t t o t e c h n i c a l m o d i f i c a t i o n w i t h o u t p r i o r n o t i c e .- 2 of 2 -Service conditions▪The services offered only apply to complete products supplied by KSB.▪The services offered only apply to pump sets with a drive rating ≤ 160 kW.▪Work is carried out on working days (i. e. usually Monday to Friday) between 8:00 AM and 5:00 PM. If, upon the customer's request, work is carried out on the weekend or on public holidays the corresponding surcharges stipulated in the collective agreements applicable at the site will be invoiced; the minimum will be a surcharge of 50 %. Appointments are to be coordinated with the responsible sales branch at least 8 working days in advance.▪For motor ratings > 22 kW suitable auxiliary equipment is required, for example lifting equipment.▪For motor ratings > 37 kW an assistant must be available to help the service engineer.If the customer cannot provide an assistant, a second service engineer will be assigned, whose time and expenses will be invoiced.▪Unforeseen additional work and waiting time for which KSB service staff is not responsible will be charged according to the rates valid at the time the service is performed.CommentsDate, signature3Time between end of installation and start of test run ≤ 1 hour。
Hot & Crisp Fry StationMG3 Model FD014100 Replacement Parts CatalogFunction∙Holds Large Size Fry CartonsFeatures∙Easy to use keyhole style mounting system∙Easy load swing open topFD018126-LDimensions: 16” H x 4.93” W x 2.5” DWeight:1.7lbsFunction∙Holds Medium Size Fry CartonsFeatures∙Easy to use keyhole style mounting system∙Easy load swing open topFD018126-MDimensions: 16” H x 4.18” W x 2.75” DWeight:1.7lbsFunction∙Holds Small Size Fry CartonsFeatures∙Easy to use keyhole style mounting system∙Easy load swing open topFD018126-SDimensions: 16” H x 4.18” W x 2.75” DWeight:1.7lbsFunction∙Holds Value Size Fry CartonsFeatures∙Easy to use keyhole style mounting system∙Easy load swing open topFD018126-VDimensions: 16” H x 4.18” W x 2.75” DWeight:1.7lbsFD018125Function∙Mounting Bracket For Fry Carton DispensersFeatures∙Easy to use keyhole style mounting system∙Fits large, medium, small, and value dispensersFD018125Dimensions: 9.62” H x 21.5” W x 6.12” DWeight:7lbs7000732-8Function∙8”x8” Air FilterFeatures∙Wire mesh design for easy cleaning7000732-8Dimensions: 8” H x 8” W x .5” DWeight:.546lbsFunction∙Fry Station Double Salt ShelfFeatures∙ Holds two salt shakers∙Easy to use keyhole mounting styleFD018131Dimensions: 2.5” H x 9” W x 5” DWeight:1.4lbsFunction∙Holds Ready Chicken NuggetsFeatures∙Easy to use keyhole style mounting systemFD018132Dimensions: 3” H x 8” W x 15.12” DWeight:1.3lbsFunction∙Holds Cooked FriesFeatures∙ Separates fries for consistency ∙Holds one basket of friesFD018122Dimensions: 10.62” H x 10” W x 21.06” DWeight:9lbsFunction∙Holding Box For Fry Lane Heater InsertsFeatures∙ Easy to remove filter ∙Heats all three fry lanesFD014123Dimensions: 18.31” H x 30.06” W x 6.81” DWeight:22lbsOperating Voltage∙120 Volts, 10.5 Amp, 1250 Wattoperation Function∙Single lane forced air fry heating systemFeatures∙ 1250 watts of heating power ∙Dual safety limits ∙Programmable thermostatFD018124Dimensions: 10.06” H x 9.7” W x 5.95” DWeight:6lbsFunction∙Holds (3) Fry Dump PansFeatures∙Easy lift handles for cleaningFD018121Dimensions: 4.62” H x 20.75” W x 30.62” DWeight:15lbsFunction∙Chili Cheese Fry Tray And Lid HolderFeatures∙Holds both trays and lids for chili cheese friesFD018127Dimensions: 7.18” H x 12.37” W x 6.75” DWeight:5lbsFunction∙Heated Fry Staging RibbonFeatures∙ Heated fry holding∙3 rows hold several ready orders of any sizeFD018128Dimensions: 2.31” H x 6.93” W x 9.18” DWeight:2.3lbsFD018169-SCOOPFunction∙Holding Box For Fry Lane Heater InsertsFeatures∙ Easy to remove filter ∙Heats all three fry lanesFD018169-SCOOPDimensions: 9.87” H x 10” W x 2.5” DWeight:5lbsFunction∙Insert For Fry Station Portioning PanFeatures∙Holds (12) 1/6th size pans for fry portioning∙Easy removal for cleaningFD018142Dimensions: 1.25” H x 21.25” W x 28” DWeight:6lbsFunction∙Fry Portioning PanFeatures∙ Holds (12) 1/6th size pans∙Handles for easy removal and cleaningFD018146Dimensions: 3.12” H x 19.5” W x 28.56” DWeight:11lbsFD018141-DFFunction∙Front For Drawer AssemblyFeatures∙ Insulated Drawer Front ∙Magnetic GasketFD018146Dimensions: 10.75” H x 24” W x 1.875” DWeight:10lbsFD018144Function∙Bottom Drawer Bulk Storage PanFeatures∙Convenient bulk fry storageFD018144Dimensions: 6.875” H x 20.75” W x 20.06” DWeight:12lbsFD018141Function∙Drawer InsertFeatures∙ (2) drawers for fry storage∙ Large top drawer for portioning pans ∙Heavy duty drawer slidesFD018141Dimensions: 19.62” H x 21.81” W x 29.25” DWeight: 68lbs7000272-14Function∙Drawer GasketFeatures∙Magnetic7000272-14Dimensions: 10.18” H x 23.75” W x .5” DWeight:1lbFunction∙22” Heavy Duty Drawer SlideFeatures∙500lb capacity7000486-03320022Dimensions: 3.16” H x .75” W x 22.18” DWeight:6lbsFunction∙28” Heavy Duty Drawer SlideFeatures∙500lb capacity7000486-03320028Dimensions: 3.18” H x .75” W x 28.18” DWeight:7lbs7000732-13Function∙13”x13” Air FilterFeatures∙Wire mesh design for easy cleaning7000732-13Dimensions: 13” H x 13” W x .5” DWeight:.62lbs7000015Operating Voltage∙120 volts, .1 ampsFunction∙Refrigeration Temperature ControlFeatures∙ Digital display∙Dual temperature probes7000015∙ High Pressure SwitchFeatures∙ SPDT type switch∙ 100 PSIG to 400 PSIG Range∙ 40 PSI to 150 PSI differential7000009∙ 115 Volts, 5.3 Amps, 60 HertzFunction∙ 1/10 HP Compressor / Condensing Unit7000025Function1/4 ODF, 3/4 ODF Expansion Valve70000117000048-No BraketOperating Voltage∙120 volts, 3.5 ampsFunction∙Evaporator coil7000048-NOBRACKET901692FunctionEvaporator Drain Pan901692Dimensions: 4.43” H x 4.59” W x 16.64” DOperating Voltage∙120 Volts, 2.5 AmpsFunction∙Condensate Evaporator PanPan and Power Cord can be purchased individually7000023-72Operating Voltage∙120 Volts, .1 AmpsFunction∙Drain Heating Wire7000733-180Function∙Safety LimitFeatures∙ 330°f setpoint ∙Automatic reset7000737-330Function∙Safety LimitFeatures∙ 400°f set-point ∙Push to reset7000737-4007000291-OYLOperating Voltage115 Volts, .1 Amp Operation FunctionAxial Fan7000291-OYL7000738Function∙Solid State RelayFeatures∙ Green LED indicator ∙ Protective touch safe cover ∙Built in MOV protection70007387000781-TEMPCOOperating Voltage∙120 Volts, 5.2 Amp, 625 Watt OperationFunction∙Heating Element For FD018124 Fry Lane Heating InsertFeatures∙ Finned casing for more efficiency ∙625 Watts of heating power7000781-TEMPCOOperating Voltage∙100-240 Volts, 3 WattsFunction∙Temperature Control UnitFeatures∙ PID control∙Digital display screen ∙ 100ms High speed sampling ∙Built in MOV protection7000786Function∙Socket For Temperature ControllerFeatures∙Din rail mounting system70007877000796FunctionPortioning Pan7000796Dimensions: 6” H x 6.87” W x 6.56” DWeight:.94lbs7000834Function∙ Temperature ProbeFeatures∙ K type thermocouple7000834FD018188Operating Voltage∙ 12 Volts DC, .13 AmpsFunction∙ (3) Lane Fry TimerFeatures∙Breakfast, Lunch, and Dual Serve modes ∙ 8 minute hold timesFD0181887000748-12Operating Voltage12 DC Volts, .2 Amps, 4 Watt OperationFunctionLED Light Strip7000748-12。
