江苏索普54万吨-工艺流程 Model (1)
- 格式:pdf
- 大小:221.59 KB
- 文档页数:7
ocusing on way s and means of improving and upgra ding w ork, further devel opment of "three to split". (A) fully grasp "no una uthori sed" create d. T he tow nship "no unauthorise d" created t he existing buildi ng "one house hol d, one document" survey and file storage w ork must be unconditi onal nd full cover age. M ain corridor lea ding to t he tow n (road, river) village, t he Central built-up area of the tow n on both si des m ust be t o create a "no unaut horise d village". According to "five hundred village s" created a nd sha nty towns, villages, ol d house s, reconstructi on of old plant, ex pand create, upgradi ng creates file s, the re al "no una uthori sed v illage" created i nto the be nefit of the people of very good thi ng. (B) to stri ctly manage count as una uthorised controls. Prom oting the "new" control w ork to move t he ce nter of gravity, manageme nt measure s to the front, a nd ear nestly pipes effectively. A stri ct new una uthorise d netw ork responsibility. Se ctors such as l and, housi ng and ba sic stati ons (stations) and t he Tow nshi p of grid a ccountability me cha nisms must be stri ctly in a ccor dance wit h the new regulat ory requirem ents, effective implementation of the area of responsibility of the new in spe ctions, suppression, dem olition work to e nsure that the new "zer o tolerance". Se cond, publi c security, w ater, ele ctricit y, water, oce ans a nd fisheries, touri sm coll aborati on, market supervi sion de partments should strictly enfor ce the illegal constr ucti on of disposal of relevant pr ovisi ons of the regulati ons, effective fulfilment of responsi bilities, particularly in e lectri cit y and water suppl y, and other units may not be new il legal buildi ngs to supply water a nd el ectricity supply. While more reg ulation to pr event per sonal priva cy violati ons. Illicit tradi ng in illegal constr ucti on i n the Mi nistry of publi c se curity sector t o strictly from the blow. T hree is t o create a dditional offence reporting sy stem of ince ntives. According to buil ding la w and cov ers an area of nature, to report timely degree divide d report grade, effective after the removal of certain i nce ntives. (C) integrate d implementati on ", buil ding demoliti on, m odificati on, use" combi nation. Dem olition is the means and purpose built i s. To adhere to t he buil ding demoli she d, combi nation of constr uction a nd demolition waste, demolished with combi ne d efforts to impr ove t he scie ntific level of thr ee to split; second, we must pay attenti on to "thre e to split" and "five hundred" a nd "five water treatment", "three of the four si des", t he shackDi strict transformation, a nd da ngerous ol d room transformation and "two roa d si des", se ries work organic com bine d up, active do Rive r, and al ong demolition w ork, and manpower a dvance village in the, and ol d resi dential demoliti on work, to improve d masses housi ng conditions and live e nvironment; thr ee to put "three m odified a split" as tra ditional low, a nd small, and bulk industry structure tra nsformation upgrade of important i nitiatives to caug ht, speed up a dvance industry Park, effectiv optimization park e nvironme nt长江大学工程技术学院毕业设计(论文)开题报告题目名称年产5万吨乙酸乙酯生产工艺设计系部化学工程系专业班级化工61001班学生姓名徐强指导教师张铭辅导教师开题报告时间2014 年 3 月 20 日nd impr ove idl e land of utilizati on, real a chi eved envir onme nt improved a nd productivity development mut ual prom oting total wi n. Five, firmly implement, promoti ng work ahead, to create hig hlights. T hird depl oyment, impl ementation of seve n, the n it is imperative to stre ngthe n responsibility a nd impr ove the mec hanisms and impleme ntation. All localities a nd departments m ust be convi nce d that goal s, goi ng all out, mustering spirit, w ork together t o ensure that thi s year's obje ctives carry out tasks, at the forefront. First, we m ust strengthen the leader shi p to implement. Departments at all level s shoul d always w ork and rural "five water treatment", "three to split" in a n important position, and carry the mai n responsibi lity, main lea der personally, leaders arre sted and layers of responsi bility rank transmissi on pre ssure e stabli she d hierarchical a ccountabilit y, and work together to pr omote the w ork of the mechani sm, a concerted effort pay attention to impleme ntation.County nongba n, flood, thr ee to one down t o further play a lea ding catch total, integrated a nd c oor dinate d role of all ki nds i s "long", "Sheriff" "Inspe ctor" to effectively fulfill their responsi bilities, formed the alig nment on the fire line a nd ma nagement a lively sit uation. Second, we must strengthe n the test impleme ntation of the Gover nor. Role play t he Gover nor got t he baton, for agricultural a nd rural focus and "five water treatment", "three to split" work, refine im pr ove asse ssment methods and evaluati on system, a ccurate assessment. Combi ned wit h "dare pla y, tree benchmark" style buildi ng five major operations, carry on a nd gain firstha nd ex perie nce of supe rvision, in particular, to strengthe n the focus on t he "long" sig ns "go left", "names" such as supervi sion, urge d all levels l onger on duty in pl ace. Through the supervisory asse ssment, t o promote habit s, stimulati ng powe r. Thir d, we must stre ngthe n implementati on style. Departme nts at all levels to w ork in r ural areas and "five water treatment", "three to split" as traini ng cadre s for major platforms, compete agai nst large examination room, inspecti on cadres work performance of the ring, water control and the Japanese pulled a w orkout, trai ning, discovery and sele ction of ca dres. T han good catch up, first to exce llence-oriented. Party members and ca dres at all level s must adhere to t he rural, water contr ol and the Japa nese pulle d a grass-roots, "put dow n the shelf, leane d" pragmatic style, the spirit of play, become a be nchmark model. F our, we must stre ngthen propaganda implementati on. Compre he nsi ve utilization of micro-cre dit, micro-bl ogging, new me dia, mini ng, summarizi ng, good publicity w ork in the countrysi de and "five water treatment", "three to split" advanced m odel s, point to gather positive energy for the community to see t he result s of our w ork in time, i ncrease publi c awarene ss, participati on rates, satisfaction and support. Play gongqi ngfu, a mass organizati on a nd grass-roots such a school s, communityT he role of IIdemolition, modification, use" com bination. Demolition is the mea ns a nd purpose built i s. To adhere to the buildi ng demoli she d, combi nation of construction and demoliti on wa ste, dem olished wit h com bine d efforts to improve the sci entific level of three to split; se cond, w e must pay attention to "three to split" and "five hundred" and "five water treatment", "three of the four side s", the shack District transformati on, a nd danger ous old room transformation and "two road side s", series w ork organi c combined up, a ctive do River, and a long demoliti on w ork, and manpower a dvance village i n the, a nd ol d resi dential demoliti on w ork, to improve d masse s housi ng conditi ons and live environment; t hree to put "three modified a split" as traditional low, and small, a nd bulk industry struct ure transformation upgrade of important initiatives t o caug ht, speed up a dvance industry Park, effective optimization park envir onme nt年产5万吨乙酸乙酯生产工艺设计学生:徐强,化学工程系指导教师:张铭,化学工程系一、题目来源本项目为年产5万吨的乙酸乙酯工厂,利用来自荆州化工园区提供的乙醇来生产乙酸乙酯产品。
第二章醋酸生产工艺第五节甲醇羰基化制醋酸一、工艺流程叙述1、羰基化工艺发展历史:甲醇羰基合成法有“高压法”和“低压法”之别。
1950年联邦德国的BASF 公司首先开发出钴系催化剂,该法反应条件苛刻,温度为250℃,压力为70Mpa,而且副产品多,该法称为“高压法”。
国外曾建有4套装置,目前已全部停产。
1968年美国Monsanto(孟山都)开发出铑-碘催化剂体系,反应条件温和,温度为180-190℃,压力为2.7-2.9Mpa,该法称为“低压法”。
1978年美国Celeance(塞拉尼斯)公司采用传统Monsanto法建设了一套27万吨/年的装置,1980年Celeance公司对传统的Monsanto工艺进行改进,推出了Celeance AO Plus(酸最优化)工艺。
1982年英国BP(碧辟)公司引进Monsanto技术建成了一套17万吨/年的装置,并于1986年买下Monsanto低压甲醇羰基化生产醋酸技术的专利权,其后BP公司在Monsanto法基础上对工艺流程做了局部改进,形成Monsanto/BP法,英国BP公司对Monsanto/BP法工艺不断进行改进,于1996年推出了BP Cativa工艺。
西南化工研究院、清华大学、中科院化学所等国内多家科研院所自70年代就开始进行低压甲醇羰基化合成醋酸工艺技术的开发研究,由于当时材料不过关,又无法从国外进口,一直没有实现工业化生产。
90年代,江苏索普集团公司联合西南院、中科院化学所、上海化工设计院、西安五二四厂、上海石化总公司、合肥通用所等单位进行国内首套低压甲醇羰基化合成醋酸工业化装置的开发建设,首先完成了300吨/年中试装置的建设、试验,在此基础上完成了10万吨/年醋酸装置的工艺软件包开发、工程设计、特材(锆材、哈氏合金等)设备的研制、加工制作,历时8年,装置于1998年元月5日一次投料试车成功,当年达产,2000年进行2.5万吨/年扩能改造。
年产30万吨乙酸乙酯的工艺设计(总93页)--本页仅作为文档封面,使用时请直接删除即可----内页可以根据需求调整合适字体及大小--年产30万吨乙酸乙酯的工艺设计摘要乙酸乙酯是重要的精细化工原料。
它是一种具有优异溶解性能和快干性能的溶剂,已广泛应用于生产中。
目前,乙酸乙酯的工业生产方法已趋于成熟,而乙醛缩合法因其具有原料来源广泛、绿色、环保等优点在众多生产方法中脱颖而出最具发展前景。
本设计采用乙醛缩合法,对工艺中的主要设备进行物料与能量衡算,并对乙酸乙酯的精馏塔、反应器进行了设计选型。
根据设计要求对设备进行选型。
就脱乙醇塔而言,塔体压力为常压,回流比取3,操作条件:XD =99%、XW=。
计算出塔板数为46块,塔高。
对塔体的主要尺寸设计:精馏段:算得堰长为,出口堰高为,堰宽为,降液管底隙高度为;提馏段:算得堰长为,出口堰高为,堰宽为,降液管底隙高度为。
对于反应器选择连续型搅拌反应釜:算得筒体高度,筒体和封头直径3m,内筒筒体厚度为10mm。
设计中,首先根据工艺操作的要求和特点,参照相关工艺的资料,绘制工艺流程图,然后根据工艺计算结构设计的最终数据画出主要设备图。
设计满足安全生产要求,而且经济合理。
关键词:乙酸乙酯,乙醛缩合法,物料衡算,精馏塔,工艺流程图PRODUCTION DESIGN WITH AN ANNUALOUTPUT OF 300 THOUSANDS TONS OFETHYL ACETATEABSTRACTEthyl acetate is an important fine chemical raw material. It is a kind of excellent solubility and fast-drying solvent, has been widely used in production. At present, the industrial production of ethyl acetate have been more and more mature, and the condensation of acetaldehyde because of its wide raw material sources, green, environmental protection and other advantages stand out from many production methods in the most development prospect.The condensation of acetaldehyde had been used in the design, material and energy balance calculation of the main process equipment, and distillation tower, reactor for ethyl acetate were design selection. According to the design requirements, we selected the suitable equipment. As far as alcohol tower, the tower body was at atmospheric pressure, reflux ratio was 3, the operating conditions:X D =99%, XW=. We could calculate that the plate number was 46, theheight of the tower was . The main dimensions design of tower body: rectifying section: the length of the weir was , the outlet height of the weir was , the width was , the down comer height of the bottomclearance was ; stripping section: the length of weir was , the outlet height of the weir was , the width was , the down comer height of the bottom clearance was . The reactor was selected continuous stirredtank reactor: the height of cylinder was by calculation, the diameter of cylinder and head was 3m, the thickness of the inner cylinder was10mm. In the design, according to the process requirements and characteristics, reference to the related process data, we could drawa process flow diagram, then according to the process of structure design and calculation of the final data to draw the main equipment. The design satisfied the requirement of safe production, andreasonable in economy.KEY WORDS: ethyl acetate, acetaldehyde, material balance, distillation, process flow diagram符号说明符号意义单位A传热面积m2弓形降液管面积m2Af塔截面积m2ATC气体负荷系数m/sC定压比热容kJ/(kg·℃) PD精馏塔直径m阀孔直径mdE液流收缩系数全塔效率ET雾沫夹带量kg液/kg气evF原料液流量kmol/hH塔高m塔底空间高度mHB塔顶空间高度mHDH降液管内清液层高度m d进料板处高度mHFh干板阻力m液柱c板上充气液层阻力m液柱hl气相通过浮阀塔板的压降m液柱hp出口堰高mhw堰上液层高度 mho w传热系数W/(m2·℃) KL精馏塔液相流量kmol/h堰长mlwMA物质的分子量AN实际塔板数块P操作压力KPa单层塔板压降PaΔPpt物料温度℃t∆平均温度差℃mu速度m/s V精馏塔气相流量kmol/h弓形降液管宽度mWdWs破沫区宽度mx馏出液中易挥发组分摩尔分数dx原料液中易挥发组分摩尔分数fx釜残液中易挥发组分摩尔分数Wα相对挥发度θ液体在降液管中停留时间s液相密度kg/m3ρLρ气相密度kg/m3 vt孔心距mμ粘度Pa s⋅l目录摘要 (II)前言 (10)第1章工艺流程的确定 (18)§本课题设计的内容和要求 (18)§设计要求 (18)§具体设计内容 (18)§设计方案的确定 (18)§设计原理 (19)§工艺流程 (20)第2章物料衡算 (22)§数据采集 (22)§全流程的工艺数据 (22)§催化剂的配方 (22)§操作条件 (22)§原料和产品的控制指标 (23)§一步缩合反应釜的物料衡算 (24)§二步缩合反应釜的物料衡算 (25)§单效蒸发器的物料衡算 (26)§脱乙醛塔的物料衡算 (28)§脱乙醇塔的物料衡算 (29)§脱重组分塔物料衡算 (30)第3章热量衡算 (32)§基本数据 (32)§一步缩合反应釜的热量衡算 (33)§二步缩合釜热量衡算 (34)§单效蒸发器的热量衡算 (34)§冷凝器的热量衡算 (36)§脱乙醛塔的热量衡算 (37)§冷凝器的冷凝量 (38)§脱乙醇塔的热量衡算 (38)§再沸器的热负荷 (38)§冷凝器的冷凝量 (39)§脱重组分精馏塔的热量衡算 (39)§再沸器的热负荷 (39)§冷凝器的冷凝量 (40)第4章设备选型及车间布置经济核算 (41)§缩合釜的设计 (41)§缩合釜体的设计 (41)§搅拌装置的设计 (43)§单效蒸发器的设计与选型 (44)§蒸发器的选择理由 (44)§蒸发器计算与设计 (44)§脱乙醛塔的设计与计算 (47)§基础数据 (47)§塔径的确定 (51)§塔板结构设计 (51)§塔板布置 (53)§流体力学验算 (54)§塔高的确定 (56)§脱乙醇塔的设计 (57)§基础数据 (58)§塔径的确定 (61)§塔板结构设计 (62)§塔板布置 (63)§流体力学验算 (65)§塔高的确定 (67)§脱重组分塔的选型与计算 (68)§相关计算 (69)§辅助设备的选型 (70)§泵的选型 (70)§再沸器的选型 (70)§冷凝器选型 (71)§工艺设备一览表 (72)§车间布置的基本原则和要求 (72)§车间布置的基本原则 (73)§车间布置的要求 (73)§本设计的生产车间布置 (76)§建设项目投资 (77)§固定资产投资估算 (77)§建设期贷款利息 (78)§流动资金估算 (78)§生产成本估算 (78)§直接材料费 (78)§生产人员工资及福利 (79)§制造费用 (79)§经济效益 (80)§投资回收年限 (80)§核算总结 (81)第5章总结 (82)§乙酸乙酯的生产流程 (82)§生产设备设计 (82)参考文献 (83)致谢 (85)附录 (86)外文资料译文及原文 (87)前言乙酸乙酯(EA),又名醋酸乙酯,英文名称:Ethyl acetate。
1.项目概述本项目是一个年产5.5万吨的1,4-丁二醇生产项目。
1,4-丁二醇是一种重要的化工原料,广泛用于生产聚酯、溶剂、冷却剂等。
该项目旨在满足市场对1,4-丁二醇的需求,并提供高质量的产品。
2.生产工艺本项目采用丁烯为原料,通过羰基位活化加成型反应制得1,4-丁二醇。
生产工艺主要包括以下步骤:(1)丁烯预处理:通过分离纯化步骤将原丁烯提纯至高纯度。
(2)气相羰基化反应:将高纯度的丁烯与一氧化碳在催化剂存在下进行气相羰基化反应,得到羧酸酯。
(3)还原反应:将羧酸酯通过还原反应转化为1,4-丁二醇。
(4)产品分离与精制:通过蒸馏、凝固、结晶等分离工艺,得到高纯度的1,4-丁二醇。
(5)废气处理:对气相羰基化反应和还原反应产生的废气进行处理,减少对环境的影响。
3.主要设备本项目的主要设备包括:(1)丁烯预处理设备:包括分离塔、精馏塔、储罐等。
(2)气相羰基化反应设备:包括反应器、冷却器、加热器等。
(3)还原反应设备:包括反应器、加热器、冷却器等。
(4)产品分离与精制设备:包括蒸馏塔、凝固设备、结晶器等。
(5)废气处理设备:包括催化燃烧器、吸附塔等。
4.厂区规划与布局本项目的厂区占地约为100亩。
厂区规划和布局主要包括:(1)生产车间:包括丁烯预处理车间、气相羰基化反应车间、还原反应车间、产品分离与精制车间等。
(2)辅助设施:包括仪控室、实验室、库房、办公楼等。
(3)化工园区:包括废气处理站、废水处理站、储罐区等。
5.环保措施本项目采用了一系列的环保措施,以减少对自然环境的污染,包括:(1)废气处理:采用催化燃烧器对废气进行处理,将有害物质转化为无害物质。
(2)废水处理:采用生物处理工艺对废水进行处理,减少对水环境的污染。
(3)固体废物处理:将产生的固体废物进行分类、储存和处理,以减少对环境的影响。
6.经济效益预测根据市场需求和生产成本分析,预计本项目的年产值可达到数亿元,利润率约为20%左右。
项目的投资回收期为5年左右。
江苏索普(集团)有限公司土壤环境自行监测报告江苏索普(集团)有限公司二零一八年十二月项目名称:江苏索普(集团)有限公司土壤自行监测报告委托单位:江苏索普(集团)有限公司编制单位:江苏新锐环境监测有限公司项目负责人:郭李超参与人员:唐远征朱文俊匡正山那晶晶夏飞等目录1 总则 (1)1.1 编制目的 (1)1.2编制依据 (1)1.2.1 相关规定和政策 (1)1.2.2 技术导则、标准及规范 (2)1.2.3其它相关资料 (2)1.3工作流程 (3)2 企业概况 (4)2.1企业基本信息 (4)2.2厂区平面布置及工艺情况 (7)2.3企业主要产品及原辅材料 (10)3重点区域识别及采样点位布设 (11)3.1废水、废气及固体废物排放 (11)3.2重点区域及设施信息记录 (12)3.3采样点位布设 (13)3.3.1土壤及地下水布点情况 (13)3.3.2土壤及地下水监测因子 (13)4 样品采集及样品分析 (18)4.1样品采集 (18)4.1.1采样步骤 (18)4.1.2土壤样品采集情况 (19)4.1.3地下水样品采集情况 (20)4.2样品保存、流转及交接 (21)4.3分析方法 (22)5质量控制与质量保证 (24)5.1防止采样交叉污染 (24)5.2建设监测井的质量控制 (24)5.3现场采样质量控制 (25)5.4实验室分析质控 (26)5.5 二次污染防治与安全防护措施 (30)6 监测结果及分析 (32)6.1评价标准与结果分析 (32)6.1.1土壤评价标准 (32)6.1.2地下水评价标准 (33)6.2土壤结果分析 (34)6.3地下水结果分析 (42)6.4小结 (44)7 企业针对监测结果拟采取的主要措施 (45)1 总则1.1 编制目的《土壤污染防治行动计划》(国发〔2016〕31号)中提出:“应加强污染源日常环境监管,做好土壤污染预防工作。
各地要根据工矿企业分布和污染排放情况,确定土壤环境重点监管企业名单,实行动态更新,并向社会公布。
(ID索普15万吨/年醋酸技改主装置钢结构预制及安装方案1. 编制说明本方案是根据上海索普化工设计工程有限公司的施工图纸并结合现场实际情况编制的,仅用于指导索普醋酸技改装置钢结构的预制、安装,钢结构的防腐和防火另行编制方案。
2. 工程概况索普醋酸工程的钢结构为210A(合成)框架、210B(分离)框架、210C (回收)框架、210D (主管廊)钢结构和210G(中间储槽)管廊钢结构。
210A框架主体由1/6、2/7、1/8、1/9轴线和A、B、C D轴线组成,共14根立柱,其中标高为29.95米四根。
210B 框架主体由9、10、11轴线和J、H G轴线组成,共16根立柱,其中标高为43.55米四根。
210C框架主体由10、1/10 > 1/11、1/12、13轴线和C、D轴线组成,共14根立柱,其中标高为23.55米四根。
210D中间管廊钢结构由1至13轴线和E、F轴线组成,共26 根立柱,标高为9.6米。
210G 主要为中间储槽管廊钢结构和12付钢架组成。
框架结构总重约743吨。
立柱和主要承重梁为H型钢,连接梁为型钢。
材质均为Q235-B。
现场H型钢尺寸有:HM594X 302、HM40(X 400、HM39(X3 00、HN250< 250、HN35« 175、HA200X 200 . HA300X 150 和H250*125等规格。
型钢的种类有:I25 a、I20a、I16、I14,匚20a、匚16、/200X 10、/ 180X 10、/ 160X 10、/ 100X 10 等。
连接钢板为5 16等,异形柱连接板为5 20 o结构的连接型式为螺栓加焊接,其中梁与柱连接为连接板、螺栓加焊接,梁与梁连接为角钢、压紧板、螺栓加焊接。
3. 编制依据3.1设计文件3.2《钢结构工程施工及验收规范》(GB50205-2001)3.3《建筑钢结构焊接规程》(JGJ81-91)3.4《建筑工程施工质量检验评定统一标准》(GB50300-2001)4. 施工程序图纸会审f编写施工方案f施工准备f技术交底f材料验收f 原材料矫正f原材料打砂防腐处理f构件预制f构件表面处理f 构件矫正、组对f 构件验收f基础验收f构件安装f找平找正f 焊接(或螺栓连接)f质量检查f现场油漆f防火涂料f交工验收。
索普60万吨/年醋酸造气工艺技改项目——气化框架、渣水处理施工情况介绍一、工程概况:索普(集团)60万吨/年醋酸造气工艺技术改造项目气化框架、渣水处理工程,位于镇江长岗索普新建厂区内,由中国天辰化学工程公司设计;华普建设监理有限责任公司监理;镇江建工建设集团有限公司施工。
气化框架车间建筑面积:26971.3m2,框架九层,东西1~9轴总长80.0m;南北A~D轴总宽22.0m;楼层标高分别为8.0、13.0、18.0、23.80、29.90、34.40、39.60、43.80M,屋面标高56.0 M、局部62.0M;除电梯间设砼空心砌块墙外,车间其它部分围护采用钢栏杆。
18.80M、34.40M楼层及56.0M屋面为钢筋砼梁板结构,其它楼层气化装置区的次梁为钢梁、楼面板为花纹钢板;门窗采用铝合金门、塑钢窗;框架柱、梁采用水泥砂浆粉刷;砼天棚为混合砂浆刷乳胶漆;屋面砼加气粒子、改性沥青防水卷材。
基础为管桩桩基、独立承台、基础梁;承台、基础梁顶标高为-2.0M;垫层砼:C10、基础砼:C30、框架结构砼:C40、圈梁构造柱等砼:C20。
本工程2008年3月开工,竣工时间为2009年6月,并交付业主使用。
二、施工管理过程(一)、施工策划由总工室组织集团公司相关部门、分公司、项目经理部召开工程策划会,明确创优目标,制定创优措施。
组织学习集团公司《质量管理手册》,使所有参与人员了解集团公司质量工作机构网络图,建立健全项目经理部的质量管理网络图,明确自上而下、从总工程师到项目部管理岗位各级管理人员的质量管理职责。
完善质量保证体系,编制系统的质量体系文件(质量手册、管理制度、组织设计、作业指导书);明确由集团公司验评小组、分公司工程股、项目部管理成员三级组织体系;以质量监督、工程管理、QC小组活动为施工现场实施保证。
明确由前期控制(技术、现场、材料购配件准备)、施工过程控制(技术管理、检验试验、标准评定)、移交服务(竣工交付、回访服务)三个阶段组成质量管理过程。
醋酸的生产原理、设备和生产过程班级:高2013届1班姓名:王永乐指导老师:研究背景:醋酸(学名冰乙酸)是最重要的低级脂肪族一元羧酸,它在有机化学工业中占有重要地位,醋酸工业的发展动态往往反映出有机化学工业的面貌,主要用于生产醋酸乙烯单体、醋酸纤维素、醋酸酯类、醋酸金属盐类、醋酐、卤代乙酸及其它醋酸衍生物。
这些产品广泛应用于化工、轻纺、农药、医药、染料、涂料、电子、国防、食品等各个工业部门。
现在,世界各国都很重视醋酸的生产,除了欧、美、日等工业发达国家外,新兴工业化国家也有生产。
1994~1996年全球醋酸生产能力的分布见表1 。
表1 1994~1996年全球合成法醋酸生产能力的分布[1]国家和地区1994生产能力万t/a分布量%1996生产能力万t/a分布量%美国171 28.7 224 35西欧145.5 24.4 140.8 22东亚185.6 29日本56.5 9.5其它地区223 37.4 89.6 14合计596 100 640 100我国已成为世界主要醋酸生产和出口国之一,产量逐年上升,每年以10%左右的速度递增,产销基本平衡,并有少量出口[2]。
2001~2006年国内醋酸消费见表2。
表2 2001年~2006年国内醋酸消费[3](kt/a)年份2001 2002 2003 2004 2005 2006国内消费量1057 1196 1450 1660 1877 2099国内产量860 840 945 1150 1335 1392 进口量200 350 505 510 542 707但我国醋酸工业与世界先进国家相比还有很大差距,存在着落后的乙炔法,乙醇法,装置能力小,成本高。
因此,寻求廉价的原料,开发新的生产工艺,采用适宜的经济规模,发展醋酸工业并进行深度加工配套下游产品,降低成本,扩大出口创汇等,是我国醋酸工业发展任务所在。
目前,世界上生产醋酸方法主要有:甲醇羰基合成法,现有16套装置在运行,约占总生产能力60%;乙醛法工艺,现有24套装置在运行,约占总能力25%,其它方法约占总能力的15%[4]。