DCM2012-201-2P共模电感规格书

nr电感规格及型号参数
对于NR电感（No-Resistor Inductor）的规格和型号参数，需要根据具体的需求和应用来确定。

以下是一些常见的电感参数，但具体数值会根据不同的电感型号和供应商而有所不同：
1. 电感值（Inductance）：电感值是电感器的基本参数，通常以亨利（H）为单位。

它表示了电感器在电流变化时的自感性能。

常见的电感值有微亨（μH），毫亨（mH）和亨（H）。

2. 容量（Q Factor）：容量是一种评估电感器性能的指标，它反映了电感器在工作频段内能量损耗的能力。

较高的容量意味着较低的能量损耗和较好的性能。

3. 电流额定值（Current Rating）：电感器的电流额定值表示它可以承受的最大电流。

这是非常重要的参数，因为超过额定电流可能会导致电感器过热或损坏。

4. 直流电阻（DC Resistance）：直流电阻是电感器的内部阻力，通常以欧姆（Ω）为单位。

较低的直流电阻意味着较低的功耗和较好的效率。

5. 尺寸和外观：电感器的尺寸和外观取决于其电感值和电流额定值。

常见的电感器外观包括径向引线电感和片式电感等，尺寸也有不同的标准。

这只是一些常见的NR电感的规格和型号参数。

具体的参数数值需要根据所选具体型号和供应商提供的技术资料来确定。

建议在选择和使用电感器时，仔细阅读产品说明和技术资料，以确保选择合适的型号并满足所需应用的要求。

共模电感规格书一、引言共模电感是一种用于抑制电磁干扰的重要电子元件。

它广泛应用于各种电子设备中，起到滤波、隔离和抑制共模干扰的作用。

本规格书将详细介绍共模电感的技术参数和性能指标，以便用户正确选择和应用共模电感。

二、产品概述共模电感是一种具有双绕组结构的电感器件。

它通常由磁性材料制成，具有较高的感应电感和较低的串扰电感。

根据不同的应用场景和需求，共模电感可分为各种规格和尺寸，具备不同的电气参数和性能特点。

三、技术参数1. 电感值：共模电感的电感值是衡量其性能的重要参数之一。

它通常用于表示电感器件对电流变化的响应能力，单位为亨利（H）。

根据不同的应用需求，共模电感的电感值范围从几微亨到数亨不等。

2. 额定电流：共模电感的额定电流是指在额定工作条件下，电感器件能够正常工作的最大电流值。

它通常由电感器件的内部结构、材料和散热设计等因素决定。

额定电流的选择应根据实际应用中的电流要求和安全裕度进行确定。

3. 阻抗范围：共模电感的阻抗范围是指在工作频率范围内，电感器件对电流的阻碍程度。

它通常由电感器件的电感值和串扰电感值共同决定。

合理选择阻抗范围能够有效抑制共模干扰，提高系统的抗干扰能力。

4. 频率特性：共模电感的频率特性是指其电感值在不同频率下的变化情况。

电感值随频率的变化可以是线性的、非线性的或者具有谐振点等特性。

了解共模电感的频率特性有助于在实际应用中准确选择和设计共模滤波电路。

5. 尺寸和结构：共模电感的尺寸和结构决定了它在电子设备中的安装方式和空间占用。

常见的共模电感结构有线圈式、环形式、片式等，尺寸从微米级到毫米级不等。

根据实际应用的场景和要求，选择合适的尺寸和结构能够有效提高共模电感的性能和可靠性。

四、性能指标1. 温度特性：共模电感的温度特性是指其电感值随温度变化的情况。

温度变化会引起电感器件内部材料的热膨胀和电学性能的变化，从而影响电感值的稳定性。

合理选择具有良好温度特性的共模电感，能够确保系统在不同温度环境下的稳定性和可靠性。

DCM4532[1812 inch]DCM3225[1210 inch]DCM2520[1008 inch]DCM2012[0805 inch]*DCM series•All specifications are subject to change without notice.•Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.Common Mode FiltersFor high-speed differential signal line/general signal line Type:* Dimensions Code [EIA](6) internal codeDCM4532DCM3225DCM2520DCM2012DCM Series DCM2012, 2520, 3225, 4532DCM 2012 -900-2P -T Common Mode FiltersFor High-speed Differential Signal Line / General Signal LineFEATURES•Although greatly miniaturized, this wire-wound chip-type filter maintains the characteristics needed for a common mode filter. Common mode impedance is 1000Ω [at 100MHz], so this filter is greatly effective in supporting noise.•Almost no affect upon even high speed signals since differential mode impedance is kept low.•This series includes both 2-line and 3-line types. They are used for various types of circuits and noise.APPLICATIONS•Used for radiation noise suppression for any electronic devices. •Used to counter common mode noise affecting signals within high-speed lines.•USB line for personal computers and peripheral equipment. •IEEE1394 line for personal computers, DVC, STB, etc.•LVDS, panel link line for liquid crystal display panels.TEMPERATURE RANGESPACKAGING STYLE AND QUANTITIESPRODUCT IDENTIFICATION (1) Series name(2) Dimensions L ×W 2012: 2.0×1.2mm(3) Impedance[at 100MHz]900: 90Ω(4) Number of line2P: 2-line 3P: 3-line(5) Packaging styleT: ø180mm reel taping TL: ø330mm reel taping RECOMMENDED SOLDERING CONDITIONS RECOMMENDED TEMPERATURE PROFILE FOR LEAD-FREE SOLDERREFLOW PROFILE FOR SOLDER HEAT RESISTANCEConformity to RoHS Directive Operating–25 to +85°C Storage(After mount)–25 to +85°CPackaging styleT ype Reel QuantityT apingø180mm 2000 pieces/reel ø330mm 10000 pieces/reel ø180mm 2000 pieces/reel ø330mm 10000 pieces/reel ø180mm 1000 pieces/reel ø330mm 5000 pieces/reel ø180mm 500 pieces/reel ø330mm2000 pieces/reel(1)(2)(3)(4)(5)(6)DCM2520-3P DCM4532-102-3PDCM2520-2P DCM3225-2PDCM2012-2PSHAPES AND DIMENSIONS/CIRCUIT DIAGRAMS/RECOMMENDED PC BOARD PATTERNS 2-LINE TYPE 3-LINE TYPEDCM4532-102-3P10000.6200.2DCM2520-801-3P 800 1.6200.15DCM3225-102-2P 10000.5200.2DCM3225-271-2P 2700.3200.3DCM3225-161-2P 1600.2200.35DCM3225-800-2P 800.15200.4DCM2520-102-2P 10000.9200.2DCM2520-601-2P 6000.45200.3DCM2520-451-2P 4500.4200.35DCM2520-301-2P 3000.35200.4DCM2012-361-2P 3600.5500.22DCM2012-201-2P 2000.25500.35DCM2012-121-2P 1200.22500.37DCM2012-900-2P 900.19500.4ELECTRICAL CHARACTERISTICSPart No.Impedance(Ω)typ.[100MHz]DC resistance(Ω)max.[per 1 line]Rated voltage Edc(V)max.Rated current Idc(A)max.2-LINE3-LINEDCM3225-271-2P DCM3225-102-2PDCM3225-800-2P DCM3225-161-2PDCM2520-601-2P DCM2520-102-2PDCM2520-301-2P DCM2520-451-2PDCM2012-201-2P DCM2012-361-2PDCM2012-900-2P DCM2012-121-2PMEASURING CIRCUITS 2-LINEDCM2520-801-3P DCM4532-102-3PIMPEDANCE vs. FREQUENCY CHARACTERISTICS 3-LINEMEASURING CIRCUITS 3-LINE。

电感的参数与选型时间:2010-08-28 01:32来源:互联网作者:点击:次一、电感参数我们首先看一下电感元件的主要参数。

见表1。

表1 电感元件的主要参数国半专家谈如何为便携式系统选择电感元件设计人员在考虑无源器件时，他们想到的是电感电容的生产容限，一般为± 20% 或±10%。

这在理论上是对的，但在实际应用中却不然。

本文介绍电容电感易受影响的一些参数以及系统设计人员必须了解的知识，并讨论如何为最小但最高效的便携式电源系统解决方案选择外部元件。

二、选择电感为便携式电源应用选择电感，需要考虑的最重要的三点是：尺寸大小、尺寸大小，第三还是尺寸大小。

移动电话的电路板面积十分紧俏珍贵，随着MP3 播放器、电视和视频等各种功能被增加到电话中时，尤其如此。

功能增加也将增加电池的电流消耗量。

因此，以前一直由线性调节器供电或直接连接到电池上的模块需要效率更高的解决方案。

实现更高效率解决方案的第一步是采用磁性降压转换器。

正如其名称所暗示的，这时需要一个电感。

电感的主要规格除尺寸大小外，还有开关频率下的电感值、线圈的直流阻抗(DCR)、额定饱和电流、额定rms电流、交流阻抗(ESR)以及Q因子。

根据应用的不同，电感类型的选择――屏蔽式或非屏蔽式――也是很重要的。

类似于电容中的直流偏置，厂商A的2.2μH电感可能与厂商B的完全不同。

在相关温度范围内电感值与直流电流的关系是一条非常重要的曲线，必需向厂商索取。

在这条曲线上可以查到额定饱和电流(ISAT)。

ISAT一般定义为电感值降量为额定值的30%时的直流电流。

某些电感生产商没有规定ISAT。

他们可能之给出了温度高于环境温度40 ?C时的直流电流。

DCR引起传导损耗，在输出电流较高时影响效率。

ESR随工作频率的提高而增加，在输出电流较小时影响占主导地位的开关损耗。

ESR与Q因子成正比。

相同频率下，低ESR电感的Q因子更高。

在电感满足所有其它规格时，为什么系统设计人员还应考虑ESR和Q因子呢？当开关频率超过2MHz时，必需格外关注电感的交流损耗。

上高县朋祥兴科技有限公司文件编号/File No.：版本/版次Rev.：A文件名称Document name SPECIFICATION FOR APPROVAL 发行日期/Date：2021-5-31页数/Page：2of7No.Modify matter explain Date Rev.Page 1新订/New2021-5-31A2of7上高县朋祥兴科技有限公司文件编号/File No.：版本/版次Rev.：A文件名称Document name SPECIFICATION FOR APPROVAL 发行日期/Date：2021-5-31页数/Page：3of7上高县朋祥兴科技有限公司文件编号/File No.：版本/版次Rev.：A文件名称Document name SPECIFICATION FOR APPROVAL 发行日期/Date：2021-5-31页数/Page：4of73．绕线步骤WINDING STEP INFORMATIONS:绕组WINDING 脚位TERMINAL圈数TURNS漆包线MAGNETIC WIRE胶带TAPE备注DESCRIPTION 起始结尾N11441TS REF0.25*1.5mm扁平线密绕N22341TS REF0.25*1.5mm扁平线密绕4.绕制工艺要求/MANUFACTURE SPECIFICATION1.底座（2+2）,磁芯为PXX1918-HR磁芯;2.N1同时绕制N2；3.产品需浸油,无铅制程;5．电气特性ELECTRICAL CHARACTERISTICS:@25±5℃序号NO.名称ITEMS测量端MEASURED POINT测量值TECHNICALDATA测试条件TESTING CONDITION测试仪器APPARATUS1电感量INDUCTANCEL1-4=L2-37mH min100KHz,1.0V25℃翰科3250绕组间电感偏差值L1-4-L2-3≤300UH2直流电阻DCResistanceDCR1-4=DCR2-3150mΩMAX100KHz,1.0V SERShort Other Pin3抗电强度HI-POT TESTN1对N2COIL1TO COIL2无击穿1.5KV Ac5mA3SEC蓝光LK2670A N1,N2对磁芯PRIMARY-CORE 1.0KV Ac5mA3SE c4匝比TURNS RATIO N1:N241TS(REF):41TS(REF)100KHz,1.0V 翰科3250上高县朋祥兴科技有限公司文件编号/File No.：版本/版次Rev.：A文件名称Document name SPECIFICATION FOR APPROVAL 发行日期/Date：2021-5-31页数/Page：5of75.材料清单/Material list：ITEM名称规格MANUFACTURER UL FILE NO.1磁芯PXX1918ShanDongHengRui Magent technolgy co.,ltd（山东恒瑞磁电）HRSQ1918/6.4C10K材质O/NTengzhou Mingji Nagnctism Indus try co.Itd（滕州铭基磁业）MJSQ1918/6C10K材质O/N2扁平漆包线0.25*1.51UEWJiangsu Telison New Materials Co;Lt（江苏泰利松）E4993703锡SN99.7SHENZHEN XIN JIN CHUN TIN PRODUCTSCO.,LTD（兴鸿泰锡业）SGS:SZXEC 200241300084凡立水RT9669N OBLE FLOWER ELECTRONIC TECHNOLOGY CO；LTDE213437 5底座（2+2）T375HF长春电木E41429 6.包装模式:吸塑盒+纸箱包装1.每层数量：56PCS2.每箱层数：10cases3.每箱数量：560PCS4.单个重量:15.87g(REF)5.每箱重量:9.6KG(REF)样品检验报告客户名称产品名称PXX扁平线共模电感客户料号产品型号PXX1918-7mH一、电气性能环境温度：25℃湿度：75％测试项目测试标准&要求测试数据12345678910电感量L1-4=7mH min100.0KHz/1.0V15.3512.6815.913.6214.52 L2-3=7mH min15.3512.7815.913.6214.52直流电阻DCR1-4150mΩMAX8584858584 DCR2-38584858584抗电强度N1对N2～CORE:1500V/ac5mA/3S OK OK OK OK OKN1对磁芯SE C～CORE:1000V/ac5mA/3S OK OK OK OK OK绝缘电阻PR I～SEC100MΩMIN﹠DC500VOK OK OK OK OK PR I～CORE OK OK OK OK OK SE C～CORE OK OK OK OK OK测试仪器：1、翰科32502、蓝光LK2670A测试吴玉平记录李师华审核孙学林判定OKPage：6of7。

DCM-2型直流电源监控装置DCM1.0 规约使用说明书• CHO.142.019DCM1.0 规约使用说明书• CHO.142.019• CHO.142.019北京长河机电有限公司1999年 8月1日•1999年 8月1日•CHO·142·019 共 3 页第 1 页━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━1.串行数据通信格式1.1 接口形式: RS232C(通过转换器可扩展为RS485,RS422),在RS232接口时,采用标准方式接线。

具体接线如下:9PIN DCM-2监控装置系统机(RS232) 25PIN 9PIN2 RXD RXD3 23 TXD TXD 2 35 GND GND 7 5RTS 4 7CTS 5 8DTR 20 4DSR 6 6CD 8 11.2 传送方式: 异步传输。

1.3 波特率: 1200,2400,4800,9600 bps(可选)。

1.4 传送: 起始位 1位数据 8位效验位无停止位 1位崐憙2. 通信方式下位机为被动方式,上位机为主动方式,上位机向下位机发送命令, 以代表不同的含义,下位机根据上位机发送的命令,做相应的回答。

2.1 上位机命令分为两种: 1. 数据申请命令代码。

2. 上位机遥控下位机,控制整流器起停命令。

1. 数据申请命令b7 b6 b5 b4 b3 b2 b1 b0┌─┬─┬─┬─┬─┬─┬─┬─┐│0 │0 │0 │0 │1 │0 │0 │1 │└┬┴─┴─┴┬┴┬┴─┴─┴┬┘└────┘└────┘命令段下位机地址段(0～9)下位机接收此命令后,将依次发送五种数据给上位机。

⑴时间报文; ⑵计量数据报文; ⑶设定数据报文;⑷警报数据报文; ⑸整流器状态数据报文━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━殔┌────┬──────┬────┬─────┬────┬──────┐│编制││工艺││审定││├────┼──────┼────┼─────┼────┼──────┤│校对││标准化││批准││└────┴──────┴────┴─────┴────┴──────┘CHO·142·019 共 3 页第 2 页━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━2. 遥控整流器启停命令代码b7 b6 b5 b4 b3 b2 b1 b0┌─┬─┬─┬─┬─┬─┬─┬─┐│0 │0 │0 │1 │1 │0 │0 │1 │└┬┴─┴─┴┬┴┬┴─┴─┴┬┘└────┘└────┘命令段下位机地址段(0～9)下位机接收此命令后,将控制整流器互投,如果下位机配有两台整流器, 每当接收一次上述命令,就改变一次整流器的开停状态(两种整流器状态相反)。

1.MATERIAL LIST:(材料表)NO ITEM(品名)MATERAL(材质)SUPPIER(供应商) 1BSAE(底坐)FR-5合 进2CORE(磁芯)A10 R10K越 峰/伸 勇3PCB(隔板)FR-1福 宁4 WIRE(漆包线)2UEW太平洋5TAPE(胶带)#1350F-13M6TRIPLEWIRE(三层绝缘线)TRW-B蓝 菱7 HEAT TUBE(热缩套管)CB-HFT长 园8 VARNISH(凡立水)468-2FC杰地9EPOXY(环氧树脂胶)G-9008固 德10COPPER (铜箔)CU德 昌112.SCHMATIC:(线路图)0.2MM，0.3MM15MMΦ3.0mmSPECIFICATION(规格型号) BASE-002(6P),PIN距=7.0，排距=17.6 CORE，T22*14*8+C,A10,AL=7230+/-25%13MM*10MM*2.0MM0.025*20MM3.ELECTRCAL CHARACTERISTICS:(电气特性)TEST INSTRUMENT(測試儀器):CH3250 CH502TEST CONDITION (測試條件):1KHz 0.25VTURNS (圈 数)INDUCTANCE (电感） DCR (直流电阻)WINDING METHOD(绕线方式)5.5TS 3.4uH +10%135mΩ 疏绕满层NOTE:(注意事项)TEST INSTRUMENT(測試儀器):CH-90534.EXTERIOR PROCESS EXPLANATION:(外观加工说明)3.1 ,TEST INDUCTANCE, ,DCR. (電感,直流電阻測試).WINDING(绕组)DIAMETER AND TYPE (线径及线种)N1(1 --- 2)2UEW 1.2*4 3.2.INSULATION RESISTANCE AND HI-POT TEST(絕緣電阻與耐電壓測試)TESE ITEM(测试项目)HI-POT TESE ( 耐压测试)INSULATION RESISTANCE(绝缘电阻)1.产品需含浸,用+468-2FC 凡立水.2.出入线需点EPOXY 固定3.产品本体需包15MM TAPE 两圈.TEST CONDTION (測試條件)AC 50/60HZ 0.5mA/3SEC DC 500V 100MΩ MINN1 --- N2750V 4.1 产品外观尺寸说明:PIN 距: PIN (1—2) = 12.5+/-0.5MM PIN ( 3—4) = 12.5+/-0.5MM排距: PIN (1—3) = 15.5+/-0.5MM PIN ( 2—4) = 15.5+/-0.5MM高度: 30MM MAX 宽度: 20MM MAX4.2 其他外观加工说明:产品外需焊接0.025*20MM.。

得力电量插座说明书无线充电越来越多的和我们日常生活产品结合起来，为我们带来不一样的使用体验。

专注办公用品领域的deli得力，近期推出有一款办公桌面神器：得力延长线插座（带电源适配器）。

它将无线充电+电源插座+多口充电器三合一，化繁为简。

采用3C认证新国标插孔，以及阻燃PC材质，安全有保证。

为了了解产品用料如何，接下来要为大家带来的就是产品开箱拆解。

一、deli得力延长线插座开箱包装采用简约的白色纸盒包装，左上角为产品名称，主体位置印有产品实物图，右上角为deli得力办公的Logo。

下方为产品特点：无线充电、Type-C输出接口、1.5m线材。

背面为产品详细规格参数。

产品名称：延长线插座（带电源适配器）型号：无线充电输出：5V1A2A1C总输出：.1A（Max）两个USB口每个输出：5V2.4A Max单个Type-C口使用时输出：A MaxUSB和Type-C输入：100-240V，0.5A Max，50/60Hz额定电压：250V50Hz输出电流：10A MAX额定功率：2500W MAX产品通过了3C认证。

侧边印有产品名称及得力的品牌Logo。

里面有一层白色纸质内盒，产品本体摆放其中。

包装内容：无线充电插座、说明书。

采用方形插头，插座自带1.5m线。

插头为国标三角插头，规格：10A，250V。

上面印有一个3C认证的Logo。

线体与插座连接部位特写，有效防止弯折磨损。

搭载新国标插孔，包括一个国标双脚插孔以及一个国标五脚插孔。

额定电压250V，最大电流10A，最大功率2500W。

一体铜条设计，安全发热低，笔记本、手机、家电都能用。

前方有一枚微动开关，中心有一颗柔光指示灯。

通电后，前方柔光指示灯呈蓝色。

有2A1C插孔或3个USB-A插孔两种版本可选，2A1C总输出：.1A（Max）。

两个USB口每个输出：5V2.4A Max；单个Type-C口使用时输出：A Max。

顶部为无线充电区域，充电不再被线缆。

电源电路用电感器积层铁氧体MLD 系列（车载用）MLD2012型特点,实现了产品设计根据高可靠性。

,降低了泄漏磁束。

: –40 to +125°C（包括自我温度上升)用途、汽车多媒体（远程信息处理）、各类ECU 、各类模块应用指南：汽车信息娱乐型号的命名方法特点规格表*额定电流（Itemp ）：温度最高上升40°C max.时的电流值。

*关于产品温度为 85°C 以上时的额定电流，请参照额定电流温度特性（额定值降低）的图表。

测量设备＊有时使用同等测量设备。

○额定电流温度特性（额定值降低）MLD2012SR47TTD25系列名称L×W 尺寸类别电感产品高度包装形式管理编号2.0×1.25 mm(µH)(mm max.)产品厚度L 测定频率直流电阻额定电流*型号T Itemp(mm)max.(µH)容差(MHz)(Ω)(mA)max.0.550.47±20%20.120±30%1200MLD2012SR47TTD25测量项目型号厂商L4294AKeysight T echnologies 直流电阻Digital Milliohm Meter 额定电流 Isat4285A+42841A+42842CKeysight T echnologiesAEC-Q200L 频率特性测量设备＊有时使用同等测量设备。

L 直流重叠特性测量设备＊有时使用同等测量设备。

型号厂商4294AKeysight Technologies型号厂商4285A+42841A+42842C Keysight T echnologies形状与尺寸推荐焊盘布局推荐回流焊温度曲线图包装形式Carrier tape material:Polystyrene Cover tape material:Polystyrene温度范围、单个重量*工作温度范围包括自我温度上升。

Dimensions: [mm]768772102768772102A768772102768772102T e m p e r a t u r eT T T 768772102Cautions and Warnings:The following conditions apply to all goods within the product series of WE-TI-HVofWürth Elektronik eiSos GmbH & Co. KG:General:•This electronic component is designed and manufactured for use in general electronic equipment.•Würth Elektronik must be asked for written approval (following the PPAP procedure) before incorporating the components into any equipment in fields such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network, etc. where higher safety and reliability are especially required and/or if there is the possibility of direct damage or human injury.•Electronic components that will be used in safety-critical or high-reliability applications, should be pre-evaluated by the customer.•The component is designed and manufactured to be used within the datasheet specified values. If the usage and operation conditions specified in the datasheet are not met, the wire insulation may be damaged or dissolved.•Do not drop or impact the components, the component may be damaged.•Würth Elektronik products are qualified according to international standards, which are listed in each product reliability report. Würth Elektronik does not warrant any customer qualified product characteristics beyond Würth Elektroniks’ specifications, for its validity and sustainability over time.•The responsibility for the applicability of the customer specific products and use in a particular customer design is always within the authority of the customer. All technical specifications for standard products also apply to customer specific products.Product specific:Soldering:•The solder profile must comply with the technical product specifications. All other profiles will void the warranty.•All other soldering methods are at the customers’ own risk.Cleaning and Washing:•Washing agents used during the production to clean the customer application might damage or change the characteristics of the wire insulation, marking or plating. Washing agents may have a negative effect on the long-term functionality of the product. Potting:•If the product is potted in the customer application, the potting material might shrink or expand during and after hardening. Shrinking could lead to an incomplete seal, allowing contaminants into the core. Expansion could damage the component. We recommend a manual inspection after potting to avoid these effects.Storage Conditions:• A storage of Würth Elektronik products for longer than 12 months is not recommended. Within other effects, the terminals may suffer degradation, resulting in bad solderability. Therefore, all products shall be used within the period of 12 months based on the day of shipment.•Do not expose the components to direct sunlight.•The storage conditions in the original packaging are defined according to DIN EN 61760-2.•The storage conditions stated in the original packaging apply to the storage time and not to the transportation time of the components. Handling:•Violation of the technical product specifications such as exceeding the nominal rated current will void the warranty.•Applying currents with audio-frequency signals may result in audible noise due to the magnetostrictive material properties.•Due to heavy weight of the components, strong forces and high accelerations may have the effect to damage the electrical connection or to harm the circuit board and will void the warranty.•Please be aware that products provided in bulk packaging may get bent and might lead to derivations from the mechanical manufacturing tolerances mentioned in our datasheet, which is not considered to be a material defect.These cautions and warnings comply with the state of the scientific and technical knowledge and are believed to be accurate and reliable.However, no responsibility is assumed for inaccuracies or incompleteness.Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyCHECKED REVISION DATE (YYYY-MM-DD)GENERAL TOLERANCE PROJECTIONMETHODTRi004.0002020-04-07DIN ISO 2768-1mDESCRIPTIONWE-TI HV Radial Leaded WireWound Inductor (High Voltage)ORDER CODE768772102SIZE/TYPE BUSINESS UNIT STATUS PAGEImportant NotesThe following conditions apply to all goods within the product range of Würth Elektronik eiSos GmbH & Co. KG:1. General Customer ResponsibilitySome goods within the product range of Würth Elektronik eiSos GmbH & Co. KG contain statements regarding general suitability for certain application areas. These statements about suitability are based on our knowledge and experience of typical requirements concerning the areas, serve as general guidance and cannot be estimated as binding statements about the suitability for a customer application. The responsibility for the applicability and use in a particular customer design is always solely within the authority of the customer. Due to this fact it is up to the customer to evaluate, where appropriate to investigate and decide whether the device with the specific product characteristics described in the product specification is valid and suitable for the respective customer application or not.2. Customer Responsibility related to Specific, in particular Safety-Relevant ApplicationsIt has to be clearly pointed out that the possibility of a malfunction of electronic components or failure before the end of the usual lifetime cannot be completely eliminated in the current state of the art, even if the products are operated within the range of the specifications.In certain customer applications requiring a very high level of safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health it must be ensured by most advanced technological aid of suitable design of the customer application that no injury or damage is caused to third parties in the event of malfunction or failure of an electronic component. Therefore, customer is cautioned to verify that data sheets are current before placing orders. The current data sheets can be downloaded at .3. Best Care and AttentionAny product-specific notes, cautions and warnings must be strictly observed. Any disregard will result in the loss of warranty.4. Customer Support for Product SpecificationsSome products within the product range may contain substances which are subject to restrictions in certain jurisdictions in order to serve specific technical requirements. Necessary information is available on request. In this case the field sales engineer or the internal sales person in charge should be contacted who will be happy to support in this matter.5. Product R&DDue to constant product improvement product specifications may change from time to time. As a standard reporting procedure of the Product Change Notification (PCN) according to the JEDEC-Standard inform about minor and major changes. In case of further queries regarding the PCN, the field sales engineer or the internal sales person in charge should be contacted. The basic responsibility of the customer as per Section 1 and 2 remains unaffected.6. Product Life CycleDue to technical progress and economical evaluation we also reserve the right to discontinue production and delivery of products. As a standard reporting procedure of the Product Termination Notification (PTN) according to the JEDEC-Standard we will inform at an early stage about inevitable product discontinuance. According to this we cannot guarantee that all products within our product range will always be available. Therefore it needs to be verified with the field sales engineer or the internal sales person in charge about the current product availability expectancy before or when the product for application design-in disposal is considered. The approach named above does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.7. Property RightsAll the rights for contractual products produced by Würth Elektronik eiSos GmbH & Co. KG on the basis of ideas, development contracts as well as models or templates that are subject to copyright, patent or commercial protection supplied to the customer will remain with Würth Elektronik eiSos GmbH & Co. KG. Würth Elektronik eiSos GmbH & Co. KG does not warrant or represent that any license, either expressed or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, application, or process in which Würth Elektronik eiSos GmbH & Co. KG components or services are used.8. General Terms and ConditionsUnless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms and Conditions of Würth Elektronik eiSos Group”, last version available at .Würth Elektronik eiSos GmbH & Co. KGEMC & Inductive SolutionsMax-Eyth-Str. 174638 WaldenburgGermanyCHECKED REVISION DATE (YYYY-MM-DD)GENERAL TOLERANCE PROJECTIONMETHODTRi004.0002020-04-07DIN ISO 2768-1mDESCRIPTIONWE-TI HV Radial Leaded WireWound Inductor (High Voltage)ORDER CODE768772102SIZE/TYPE BUSINESS UNIT STATUS PAGE。