ATER AGS-P-4K画面分割器

ALFATRON ELECTRONICS GmbH GERMANYALF-SUK2- HDMI 2.0 1x2 Splitter with 4KPrefaceRead this user manual carefully before using the product. Pictures shown in this manual are for reference only. Different models and specifications are subject to real product.This manual is only for operation instruction, please contact the local distributor for maintenance assistance. The functions described in this version were updated October 2018. In the constant effort to improve the product, we reserve the right to make function or parameter changes without notice or obligation. Please refer to the dealers for the latest details.FCC StatementThis equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. It has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a commercial installation.Operation of this equipment in a residential area is likely to cause interference, in which case the user at their own expense will be required to take whatever measures may be necessary to correct the interference.Any changes or modifications not expressly approved by the manufacture would void the user’s authority to operate the equipment.SAFETY PRECAUTIONSTo ensure the best performance from the product, please read all instructions carefully before using the device. Save this manual for further reference.Unpack the equipment carefully and save the original box and packing material for possible future shipment.Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.Do not dismantle the housing or modify the module. It may result in electrical shock or burn.Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or malfunction.Refer all servicing to qualified service personnel.To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.Do not put any heavy items on the extension cable in case of extrusion.Do not remove the housing of the device as opening or removing housing may expose you to dangerous voltage or other hazards.Install the device in a place with ventilation to avoid damage caused by overheating. Keep the module away from liquids.Spillage onto the housing may result in fire, electrical shock, or equipment damage.If an object or liquid falls or spills on to the housing, unplug the module immediately. Do not twist or forcefully pull ends of the optical cable. It may cause a malfunction. Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.Unplug the power cord when left unused for a long period of time.Information on disposal for scrapped devices: do not burn or mix with general household waste, please treat as normal electrical waste.Table of Content1. Product Introduction (1)1.1 Features (1)1.2 Packing List (2)2. Technical Specification (3)3. Panel Description (4)3.1 Front Panel (4)3.2 Rear Panel (4)4. System Connection (5)4.1 Usage Precaution (5)4.2 System Diagram (5)5. DIP Switch Operation (6)5.1 EDID Management (6)5.2 HDCP Mode (7)6. Firmware Upgrade (8)7. Panel Drawing (9)8. Troubleshooting & Maintenance (10)9. After-sales Service (11)1. Product IntroductionThank you for choosing the ALFAtron SUK2 HDMI 2.0 1x2 Splitter, which can distribute one HDMI input to two outputs. The splitter supports HDMI video resolution up to 4K@60Hz 4:4:4, 1080P 3D, and multichannel audio formats. Besides passing EDID information from the display, there are multiple built-in EDID settings that can be selected by the 4-pin DIP switch on the front panel. Moreover, the splitter supports convenient firmware upgrade through Micro-USB port.1.1 FeaturesSupports HDMI 2.0 and the video resolution up to 4K@60Hz 4:4:4.HDMI input supports HDCP 2.2 and the outputs support HDCP Active or HDCP Passive mode.Supports video resolution down-scaling, the 4K input can be automatically degraded to 1080P output for compatibility with 1080P display.18Gbps high bandwidth.Advanced EDID management: multiple built-in EDID settings can be selected.Built-in equalizer for signal enhancement to avoid signal attenuation in transmission. Supports CEC pass-through.Provides LEDs to indicate the current operating status.Firmware upgrade by Micro-USB port.1.2 Packing List1x HDMI 2.0 1x2 Splitter4x Plastic Cushions1x Power Adapter (5V DC 1A)1x User ManualNote: Please contact your distributor immediately if any damage or defect in the components is found.2. Technical SpecificationNote: Please use a high-quality HDMI cable fully compliant with HDMI 2.0 for reliable transmission and connection.3. Panel Description3.1 Front Panel① POWER LED: The LED illuminates red when power is applied. ② INPUT LED: The LED illuminates blue when there is HDMI input.③ OUTPUT LEDs: The LED illuminates blue when there is HDMI output on thecorresponding channel.④ EDID: 4-pin DIP switch for EDID setting and HDCP mode selection. Please referto the 5.1 EDID Management for more details. ⑤ FW: Micro-USB port for firmware upgrade.3.2 Rear Panel① INPUT: Type-A female HDMI input port to connect a HDMI source.② OUTPUTS: Two type-A female HDMI output ports to connect HDMI displays. ③ DC 5V: DC barrel port to connect an AC power adapter.EDID12345DC 5VIN4. System Connection4.1 Usage PrecautionEnsure all components and accessories are included before installation.System should be installed in a clean environment with proper temperature and humidity.All of the power switches, plugs, sockets, and power cords should be insulated and safe.All devices should be connected before power on.4.2 System DiagramThe following diagram illustrates the typical input and output connection of the splitter:4K/60 Blu-ray1080p DisplayDown Scaling4K@60 4:4:4 HDR4K/60 Display5. DIP Switch Operation5.1 EDID ManagementThe Extended Display Identification Data (EDID) is used by the source device to match its video resolution with the connected display. By default, the source device obtains its EDID from the first connected display. Meanwhile, since the displays with different capabilities are connected to the splitter, the DIP switch on the front panel can be used to set the EDID to a fixed value to ensure the compatibility in video resolution. The switch represents “0” when in the lower (OFF ) position, and it represents “1” while putting the switch in the upper (ON ) position.Switch 1~3 are used for EDID setting. The DIP switch status and its corresponding setting are shown at the back of the product.5.2 HDCP ModePut the switch 4 on the “ON” position to select HDCP Active mode, or on the “OFF” position for HDCP Passive mode.6. Firmware UpgradePlease follow the below steps to upgrade firmware via the Micro-USB port:1) Connect the splitter to the PC with USB cable.2) Power on the splitter, and then the PC will automatically detect a U-disk named of“BOOTDISK”.3) Double-click to open the U-disk, a file named of “READY.TXT” will be showed.4) Copy the latest upgrade file (.bin) to the “BOOTDISK” U-disk directly.5) If the filename “READY.TXT” automatically turns to “SUCCESS.TXT”, the firmwarewas upgraded successfully. If the firmware upgrade failed, please check the file (.bin) and then follow the above procedure to operate again.6) Remove the USB cable after firmware upgrade.7. Panel Drawing8. Troubleshooting & MaintenanceNote: If the problem persists after following the above troubleshooting steps, please contact your local dealer or distributor for further assistance.9. After-sales ServiceShould you experience problems using the ALF-SUK2, please refer to the manual and troubleshooting and maintenance section (8). Should the error persist, note that any transport costs of the equipment to the distributor are borne by the user during the warranty.1) Product Limited Warranty: ALFAtron warrants that its products will be free fromdefects in materials and workmanship for seven years, which starts from the first day of purchase.Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the unit is within the warranty period must be presented to obtain warranty service.2) What the warranty does not cover (servicing available for a fee):● Warranty expiration.● Factory applied serial number has been altered or removed from the product.● Damage, deterioration or malfunction caused by:● Normal wear and tear● Use of supplies or parts not meeting product specifications● No certificate or invoice as the proof of warranty.● The product model showed on the warranty card does not match with theproduct or if the product had been altered.● Damage caused by force majeure.● Servicing not authorized by ALFAtron● Any other causes which does not relate to a product defect● Delivery, installation or labour charges for installation or setup of the product3) Technical Support: Contact our after-sales department via email or telephonicallyand please inform us the following information about your case:● Product version and name.● Detailed failure situations.● The formation of the cases.1. Limited warranty in respect of Alfatron Products Only1.1 This limited warranty covers defects in materials and workmanship in this product.1.2 Should warranty service be required, proof of purchase must be presented to the Company. The serial number on the product must be clearly visible and not have been tampered with in any way whatsoever.1.3 This limited warranty does not cover any damage, deterioration or malfunction resulting from any alteration, modification, improper or unreasonable use or maintenance, misuse, abuse, accident, neglect, exposure to excess moisture, fire, improper packing and shipping (such claims must be presented to the carrier), lightning, power surges, or other acts of nature. This limited warranty does not cover any damage, deterioration or malfunction resulting from the installation or removal of this product from any installation, any unauthorized tampering with this product, any repairs attempted by anyone unauthorized by the Company to make such repairs, or any other cause which does not relate directly to a defect in materials and/or workmanship of this product. This limited warranty does not cover equipment enclosures, cables or accessories used in conjunction with this product.This limited warranty does not cover the cost of normal maintenance. Failure of the product due to insufficient or improper maintenance is not covered.1.4 The Company does not warrant that the product covered hereby, including, without limitation, the technology and/or integrated circuit(s) included in the product, will not become obsolete or that such items are or will remain compatible with any other product or technology with which the product may be used.1.5 Only the original purchaser of this product is covered under this limited warranty. This limited warranty is not transferable to subsequent purchasers or owners of this product.1.6 Unless otherwise specified, the goods are warranted in accordance with the manufacturer’s product specific warranties against any defect attributable to faulty workmanship or materials, fair wear and tear being excluded.1.7 This limited warranty only covers the cost of faulty goods and does not include the cost of labour and travel to return the goods to the Company’s premises.1.8 In the event of any improper maintenance, repair or service being carried out by any third persons during the warranty period without the Company’s written authorization, the limited warranty shall be void.1.9 A 7 (seven) year limited warranty is given on the aforesaid product where used correctly according to the Company’s instructions, and only with the use of the Company’s components.1.10 The Company will, at its sole option, provide one of the following three remedies to whatever extent it shall deem necessary to satisfy a proper claim under this limited warranty:1.10.1 Elect to repair or facilitate the repair of any defective parts within a reasonable period of time, free of any charge for the necessary parts and labour to complete the repair and restore this product to its proper operating condition.; or1.10.2 Replace this product with a direct replacement or with a similar product deemed by the Company to perform substantially the same function as the original product; or 1.10.3 Issue a refund of the original purchase price less depreciation to be determined based on the age of the product at the time remedy is sought under this limited warranty.1.11 The Company is not obligated to provide the Customer with a substitute unit during the limited warranty period or at any time thereafter.1.12 If this product is returned to the Company this product must be insured during shipment, with the insurance and shipping charges prepaid by the Customer. If this product is returned uninsured, the Customer assumes all risks of loss or damage during shipment. The Company will not be responsible for any costs related to the removal or reinstallation of this product from or to any installation. The Company will not be responsible for any costs related to any setting up this product, any adjustment of user controls or any programming required for a specific installation of this product.1.13 Please be aware that the Company’s products and components have not been tested with competitor’s products and therefore the Company cannot warrant products and/or components used in conjunction with competitor’s products.1.14 The appropriateness of the goods for the purpose intended is only warranted to the extent that the goods are used in accordance with the Company’s installation, classification and usage instructions.1.15 Any claim by the Customer which is based on any defect in the quality or condition of the goods or their failure to correspond with specification shall be notified in writing to the Company within 7 days of delivery or, where the defect or failure was not apparent on reasonable inspection by the Customer, within a reasonable time after discovery of the defect or failure, but, in any event, within 6 months of delivery.1.16 If delivery is not refused, and the Customer does not notify the Company accordingly, the Customer may not reject the goods and the Company shall have no liability and the Customer shall pay the price as if the goods had been delivered in accordance with the Agreement.1.17 THE MAXIMUM LIABILITY OF THE COMPANY UNDER THIS LIMITED WARRANTY SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID FOR THE PRODUCT.。

浅谈4K画面分割器摘要：4K时代强势到来，影视界最先掀起巨浪。

在各4K摄像设备和显示设备百家争鸣之时4K画面分割器顺时诞生。

它能支持多幅4K画面的叠加、漫游及画中画透明度设置，方便操作，调试简单。

4K的未来，就是它的未来。

一、4K画面分割器的诞生环境近几年“4K”这个名词应经被很多影视行家和电影发烧友所熟知，它还不断呈现热化趋势，。

索尼，佳能，三星，创维等电子行业知名企业都推出了各自的4K 产品。

据《消费电子报》2014年第一期报道，今年中国的4K*2K电视出货量迅速增长，这说明中国的4K市场已经开始活跃。

现在市场上有能够录制4k影像的录像机，也有能够支持4K画面播放的显示设备，但是它们还只是普遍应用在娱乐影视领域中。

若要将支持4K的设备组合起来，组成一个监控系统或者是调度指挥系统，那么就需要有能够支持4K的图像处理器。

而在前面的几年里，图像处理系统领域并没有和4K并肩起步，国内大多是生产图像处理系统的厂商都没有生产出支持4K超高清的画面分割器。

二、4k画面分割器的研制ATER的4K画面分割器是依托原有分割器的成熟技术，攻克超高清图像无损传输研制出来的。

整个分割器最大的特点就是能支持多幅4K画面的叠加、漫游，支持画中画图像透明度等。

研制过程围绕“4K”及便利性展开，它不仅要能实现超高清输出，还要能实现智能化的简易操作。

三．4K画面分割器的应用分割器主要用于监控系统，指挥调度系统，电信系统，多媒体会议系统等。

4K 画面分割器则应用在这些领域中需求超高清画面的模块。

比如某个部队的作战指挥部，需要将现场演练的情况最大程度真实的映现到荧幕上，按目前电子行业的水平他们需要一个4K摄像机或监视器，一个4K显示设备，还有一个就4K图像分割器。

有这主要的三大模块结合一些控制技术做成一个高性能的作战指挥部。

四、AGS-P-300-4K4K画面分割器的简介（1）支持多种信号格式输入●支持16路DVI-D、16路VGA输入或更多视频信号、支持dualink 4K输入、支持HDMI1.4a标准4K输入等，1路HDMI1.4a标准超高清4K输出●支持HDCP协议，能自适应多种格式输入信号，支持DVI-D、HDMI、SDI、HDBASE、VGA、VIDEO等信号输入●具有EDID自动检测和识别功能，能自动生成系统需要的图像分辨率。

ConnectionsTotal Video Inputs8Total Outputs12Total Aux Outputs1SDI Rates1.5G, 3G,6G,12G. Total Audio Inputs2 x XLR. 1x Microphone. Total Audio Outputs1 x Headphone.SDI Video Inputs8 x10-bit HD/UHD switchable. 2channel embedded audio.HDMI Video InputsNoneReference InputsTri-Sync or Black Burst.Video Input Re‑SyncOn all 8inputs.Frame rate and format convertorsOn all 8inputs.SDI Program Outputs9 x10-bit HD/UHD switchable.SDI Audio Outputs2 Ch embedded into SDI output.Total Multi Views1SDI Multi View Outputs1HDMI Multi View Outputs1ATEM Television Studio Pro 4KATEM Television Studio Pro 4K features 8 independent 12G-SDI inputs, for working in all popular HD and Ultra HD formats up to 2160p60. Each input features re-sync as well as a full low latency standards converter, which means the input is automatically adapted to the switchers format. You can even have 8inputs, all running different video formats! The upgraded Fairlight audio mixer features dynamics, 6 band parametric EQ, dual mono channel split and stereo simulator with audio delay on the analog inputs. ATEM Television Studio Pro4K also features the ATEM Advanced Chroma Key, Ultra HD multi‑view and motion clips in the media pool.$2,995Product Technical SpecificationsStandardsSD Video StandardsNoneHD Video Standards720p50,720p59.941080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p50,1080p59.94 1080i50,1080i59.94Ultra HD Video Standards2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p50,2160p59.94 SDI Compliance292M and 424M, 2081,2082. Video Sampling4:2:2 10‑bit Color Precision4:2:2 10‑bitColor Space4:2:2 YUVInput Resolutions for Computers720p50,720p59.941080p23.98, 1080p24, 1080p25,1080p29.97,1080p30, 1080p50,1080p59.94,1080p601080i50, 1080i59.94, 2160p23.98,2160p24, 2160p25, 2160p29.97,2160p30, 2160p50,2160p59.94,2160p60.Colorspace ConversionNoneProcessing Delay6 Lines.Audio Mixer12 input x 2 channel mixer.Selectable On/Off/Audio-Follow-Videoper channel plus separate gaincontrol per channel.Level and Peak metering. Plus newFairlight audio enhancements:Compressor, Gate, Limiter, 6 bands ofparametric EQ. Delay line and StereoSynthesizer on the XLR inputs only.Master gain control. Headphoneoutput level control with separatemix of Program, Talkbackand Sidetone.Product SpecificsUpstream Keyers1 with Chroma/Linear/Luma key. Downstream Keyers2Chroma Keyers1Linear/Luma Keyers3Talkback SupportBuilt in, uses aviation headset.Mix Minus SupportYes, on 8 camera PGM outputs.Transition Keyer(Stinger/DVE)Stinger and DVE.Total Number of Layers5Pattern Generators2Color Generators2DVE with 3D Borders &Drop Shadow1InterfaceMinimum monitor resolution of 1366x768.Number of Windows1x10Routable Windows8 routable and 2 fixed forProgram and Preview.TallyRed for program and green forpreview indication.Tally OutputEmbedded via SDI. Added viaethernet connection to BlackmagicDesign GPI and Tally Interfaceproduct. (Not included)Windows Source LabelsYes.Multi View MonitoringMulti View Monitoring 1 x 10Views.Multi View Video Standard HD/Ultra HD.Media PlayerMedia Players2, with non volatile flash memory. Media Pool Still Image Capacity 20 with fill and key.Media Pool Still Image Format PNG, TGA, BMP, GIF, JPEG and TIFF. ChannelsFill and key for each Media Player.Media Pool Clip Capacity2 with fill and key. Shared pool.Media Pool Clip File FormatTGA Sequence.Media Player Clip Length in 720HD1440frames.Media Player Clip Length in 1080HD360frames.Media Player Clip Length in Ultra HD90frames.Media Pool Audio File FormatWAV, MP3 and AIFF.ControlControl PanelBuilt in with camera control. Software panel included. Supports optional broadcast panel.Control Panel CompatibiltyIncludes ATEM Software ControlPanel. Also compatible with ATEM 1M/E Broadcast Panel and ATEM 2 M/EBroadcast Panel.Control Panel IncludedATEM Software Control Panelincluded free for Mac 10.12 Sierra orMac 10.13 High Sierra or later andWindows 8.1 64-bit orWindows1064‑bit.SoftwareSoftware UpdatesUsing USB connection directly connected to Mac or Windows computers. Includes ATEM Setup Utility.ConfigurationSet via ATEM Software Control Panel, excluding ATEM chassis IP address which is set via the ATEM Setup Utility connected via USB to chassis.Operating SystemsMac 10.12 Sierra,Mac 10.13 High Sierra orlater.Windows 8.1 or Windows 10.Power RequirementsPower Supply1 x Internal 100 - 240V AC. 4 pin 12V DC.Power Usage 70WPhysical SpecificationsEnvironmental SpecificationsOperating Temperature:5°C to 40°CStorage Temperature:-20° to 60°C (-4°to 140°F)Relative Humidity:0% to 90% non ‑condensingWhat's IncludedATEM Television Studio Pro 4KSD card with software and manualWarranty12 Months Limited Manufacturer's Warranty.。

Smart 4K 全能转换器使用说明书成都卓元科技有限公司（索贝集团成员）1、 产品使用1.1、前面板Smart 4K REF:None inPort:12G-SDI Manual Mode In:2160P50 SDR BT.709 2SI Out:2160P50 SDR BT.709 2SIIN SET IN H/S HD MODE2SI SQDOUT H/SNEXTPOWER说明：1.2、后面板说明：2、产品管理使用浏览器进行配置。

浏览器要求：IE9以上版本、Chrome 57以上版本。

2.1、管理连接2.2、登录web配置页面主机配置网口（NMS口）默认IP地址：192.168.1.10主机web登录默认账号：admin，默认密码：admin，需注意区分大小写。

2.3、设备状态登录主机web配置页面后，在状态页面中可查看主机当前状态等信息。

2.4、同步方式设置配置主机同步信号方式。

2.5、系统设置此页面可对主机相关参数进行配置。

参数修改后，需点击【设置】图标才能生效，部分参数修改后需要重启主机，请按提示进行操作。

✧网络设置：根据系统网络IP地址规划，修改卫星校时器主机网口IP地址相关参数，使其符合网络IP地址规划要求。

注：修改后的网口IP地址可在主机前面板液晶显示屏中查看。

✧密码设置：修改web配置账户登录密码，修改完成后请妥善保管好登录密码。

✧系统设置：【重置】：将主机参数恢复到出厂默认值。

【重启】：部分参数修改后需要重启主机才能生效，请按提示进行。

2.6、固件更新按提示选择新固件后进行主机固件更新。

更新固件时请遵循页面注意事项。

Features:► 1 in 2 out HDMI® splitter ► Supports 4K video► Supports 1080p60 video @ 10-12 bit Deep Color ► Supports all HDMI mandated 3D formats ► Supports HD Audio► Supports Audio Return Channel (Port 1)► EDID mode selection - ‘All Min’, ‘Audio Max’, ‘Copy Out 1’ or ‘All Max’► Fast sync speed ► HDCP compliant► External +5V DC power (included)► Premium metal housing► Domestic, commercial or digital signage applications ► Vertical surface mountable with rear integrated hang tabHSP-4K124K HDMI 1x2 SplitterINSTALLATION GUIDEContents1x HSP-4K12 unit1x +5V DC 300mA (min) power supplyInstallation Placement & VentilationThe HSP-4K12 contains high speed 300MHz HDMI silicon which does produce a reasonable degree of heat. The metal housing of the unit is designed to dissipate this heat to the ambient environment, so pleaseallow clearance of at least 100mm to the sides and above, and adequate ventilation.Rear panelDC Power Input HDMI Output 2HDMI Output 1(with Audio Return Channel)HDMI InputFront panelPower ButtonEDID Mode ButtonPower Status (Green ON)EDID Mode IndicatorEDID Mode Indicator Mini USB PortOnly use HDMI cables which you can verify as being “High Speed”, in order to ensure support for 4K video and equivalent high data rate formats. Cable length of up to 5m can be used on both input and outputs of the HSP-4K12.4K video offers four times the pixel resolution of 1080p, and runs at double the data rate. It’s literally like comparing an 8.8 MP camera with a 2MP model. It’s a flagship format which requires the use of high quality, verifiable HDMI® cablesand peripheral products for successful interoperability and performance.HDMI® Cable SelectionWall MountingThe HSP-4K12 can be mounted to a vertical surface with the integrated mounting tab at the rear of the unit. 2x 6mmØ standard ‘keyhole’ mounting points are provided at 90mm spacing. Hardware not included.Connection1. Connect an High Speed HDMI® cable from your source device’s HDMI output port, or AV Receiver’s ‘Monitor Out’ HDMI port, to the port labelled ‘HDMI IN’ on the HSP-4K12.2. Connect an High Speed HDMI® cable from the port labelled ‘HDMI OUT 1’ on the HSP-4K12 to the input HDMI port of an HDTV or other display device. This port supports ARC - see below.3. Connect an High Speed HDMI® cable from the port labelled ‘HDMI OUT 2’ on the HSP-4K12 to the input HDMI port of a second HDTV or other display device.4. Connect the supplied DC plug pack to the DC pin input of the HSP-4K12, and the AC end into mains power, and turn power on.Audio Return ChannelOutput port #1 on the HSP-4K12 supports single mode Audio Return Channel (ARC). This enables the upstream delivery of PCM 2.0 or compressed Dolby Digital or DTS soundtracks from an ARC supporting HDTV back to a supporting AV receiver. To utilize the ARC capability of the HSP-4K12, you must ensure that the unit is installed between the AV receiver (Monitor out) and HDTV.Front Panel DisplayPOWER LEDGreen indicates power ONNo illumination indicates power OFFHDMI OUT 1 & 2Green indicates connected &operational. Not illuminated indicatesdisconnection or sink powered offOFF - EDID set to throughput minimum format requests from both connected ‘output’ devices.RED - Audio is set to request maximum format from source. eg; HD Audio to an AVR. Video operates in default mode.GREEN - EDID from device connected to Output port #1 is prioritized, ignoring EDID from #2 which then acts as slave.YELLOW - EDID set to throughput maximum AV format requests from both connected ‘output’ devices.About EDIDEDID (Extended Display Information Data) is the code that a sink/display device sends upstream to source, containing video and audio support and preference data. It is one of the most prevalent causes of interop-erability failures in HDMI systems, exacerbated by devices such as splitters not properly handling multiple EDIDs back to one source. Our EDID mode selection puts you in the drivers seat, improving custom installation robustness.EDID LEDRefer to theEDID ‘Key’on top panel. Press “EDID” button on front panel to toggle between modes.© Kordz Group All Rights Reserved E.&O.E.HDMI and the logo are trademarks of HDMI Licensing, LLC, Sunnyvale CA, USA - Kordz Pty Ltd Seaford VIC Australia Kordz USA, IncSunnyvale CA, USASpecificationsHDMI Adopter since 2005。

Instruction ManualDE: Bedienungsanleitung - FR: Guide de l'utilisateur - ES: Guía del usuario - IT: Guida per l'uso - NL: Gebruiksaanwijzing - PT: Guia do usuário - Manual Revision: 06/06/2014For the most up-to-date information, please visit: Packaging Contents• 1x HDMI Audio/Video Splitter (ST122HD4KU)•1x Power Adapter (NA/EU/UK/AUS)•1x USB power Cable •1x Instruction Manual System Requirements• 1x HDMI-enabled Video Source Device (i.e. Blu-ray player, computer, etc.)• 2x HDMI-enabled Display Devices w/ cabling (i.e. Television, projector, etc.)Product DiagramFront ViewHardware InstallationNote: Ensure your HDMI-enabled video source device, and the HDMI-enabled Display Devices are powered off before you begin installation.1. Connect the HDMI Input Dongle Cable on the ST122HD4KU from the A/V output port of your HDMI-enabled Video Source Device.2. Connect an HDMI cable (not included) from each of the HDMI output ports on the ST122HD4KU to the HDMI input port on your HDMI-enabled Display Devices. Note: Each port is numbered, please take note of which number is assigned to each HDMI-enabled display device.3. Power on each HDMI-enabled Display Device, followed by your HDMI-enabled Video Source Device.4. Connect the included power adapter from an available power source to the power adapter port on the ST122HD4KU. OrIf you would prefer to use a USB power source, connect theincluded USB power cable from an available USB power source, to the power adapter port on the ST122HD4KU.5. Your Video source device A/V output will now appear on each attached HDMI-enabled display device.ST122HD4KU2-Port HDMI® Splitter with USB Power – 4KHDMI Output Port 1HDMI Output Port 1 Activity LEDHDMI Input Dongle CableHDMI Output Port 2 Activity LEDHDMI Output Port 2HDMI Output Port 2Rear ViewActivity LEDEach HDMI output port on the ST122HD4KU is equipped with an Activity LED. This LED will light while an active HDMI display is attached and receiving a video input signal.FCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.Use of Trademarks, Registered Trademarks, and other Protected Names and SymbolsThis manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to . Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by , or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.Technical Support’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit /support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit /downloadsWarranty InformationThis product is backed by a two year warranty.In addition, warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. does not warrant its products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.Limitation of LiabilityIn no event shall the liability of Ltd. and USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.Specifications。

User Manual1x4 HDMI Distribution Amplifier with 4K2K & HDCP Support Model PT-SP-HD14-4KDesigned in Germany© 2016 PureLink GmbH All rights reserved.Table of Contents1. Safety and Notice (2)2. Introduction (3)3. Features (3)4. Package Contents (3)5. Specification (4)6. Connection Diagram (5)7. Panel Description (6)8. Installation (7)9. Notice (7)10. Warranty (8)1. Safety and NoticePlease read all of these instructions carefully before you use the device. Save this manual for future reference. The PT-SP-HD14-4K 1x4 HDMI Distribution Amplifier with 4K2K & HDCP Support has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the PT-SP-HD14-4K should be used with care. Please read and follow the safety instructions to pro-tect yourself from possible injury and to minimize the risk of damage to the unit.• Follow all instructions and warnings marked on this unit.• Do not attempt to service this unit yourself, except where explained in this manual.• Provide proper ventilation and air circulation and do not use near water.• Keep objects that might damage the device and assure that the placement of this unit is on a stable surface.• Use only the power adapter and power cords and connection cables designed for this unit.• Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.2. IntroductionThe PT-SP-HD14-4K 1x4 HDMI Distribution Amplifier with 4K2K & HDCP Support provides the most cost effective and advanced HDMI splitter solution on the market, by which the high definition video and high quality audio can be transmitted to 4 different locations without losing quality. PT-SP-HD14-4K supports all 3D formats and the true 4K2K video!With built-in Mini-USB firmware update mechanism, the compatibility among countless HDMI sources and recei-vers can be further guaranteed. With the upmost 36 bit deep color video and high definition audio support, PT-SP-HD14-4K is suitable for high quality HDMI broadcasting, digital signage and education applications!3. Features• Supports HDMI Deep Color & 3D / DVI 1.0 compliant• HDCP 1.3 compliant• Wide frequency range: 25MHz~340MHz• Video bandwidth: 10.2Gbps• Resolution up to 4K2K @30• Supports default EDID and has ability to learn the EDID of displays• Supports xvYCC, x.v.Color & Deep Color• Mini-USB firmware update for expanding compatibility• Supports Dolby Digital, DTS-HD and Dolby TrueHD audio• Easy installation4. Package Contents• 1x PT-SP-HD14-4K• 1x DC 5V2A wall wart• 1x User Manual5. Specifications6. Connection Diagram7. Panel DescriptionFront PanelRear Panel1. Power LED: Lights on when device is ready2. Signal LED:Signal LED indicator3. HDMI IN: Connect to a HDMI input source4. HDMI OUT1-4: HDMI outputs to HDMI displays[HDMI OUT1: EDID Learn Default]5. Mini-USB: For technical support only [f irmware update]6. MODE:0 - F/W update mode1 - EDID Full-HD(1080p@60) - 24bit 2D video & 7.1ch audio2 - EDID Full-HD(1080p@60) - 24bit 2D video & 2ch audio3 - EDID Ultra-HD(4K2K@30) - 24bit 2D video & 7.1ch audio4 - EDID Ultra-HD(4K2K@30) - 24bit 2D video & 2ch audio5 - EDID HD(1080p@30)(1080i@60)(720p@60) - 24bit 2D video & 2ch audio6 - Auto EDID analysis learning mode7 - EDID learning mode[Please use HDMI OUT 1port for learning EDID from display]7. +5V DC: Connect to the +5V DC 2A power supply unit43215671. Automatic EDID learning will detect all the connected HDMI equipped monitors and analyze all the content of EDID. The EDID with minimal resolution support will be the reference EDID for incoming HDMI source players.8. InstallationBroadcasts HDMI signal to 4 DVI displays!1. Switch off all devices, including monitors.2. Connect to the displays.3. Connect an HDMI source (such as a Blu-ray Disc player) to the HDMI In.4. Plug in 5V DC power supply.5. Power on the HDMI monitors.6. Power on the HDMI source.9. Notice1. While connecting a new monitor to the splitter under mode6(auto EDID) & mode7(EDID learning), experien-cing a short period of time without display might be expected. The splitter will do Automatic EDID learning which analyzes the newly connected monitor to see if the EDID for the HDMI input is necessary to update!.] 2. For firmware update through Mini-USB, users MUST turn the power off, set the dip switch to “ON”, and thenconnect an Mini-USB cable between PC and device. Open the firmware update software, [1] set the correct com port and baud rate (57600 is recommended), [2] click the “File” button to direct to the firmware HEX or BIN file, power on the device and press “Program MCU” symbol to firmware update. Once update process is done, please power off the device and set the dip switch back to “1”.10. Limited WarrantyThe SELLER warrants the PT-SP-HD14-4K 1x4 HDMI Distribution Amplifier with 4K2K & HDCP Support to be free from defects in the material and workmanship for 1 year from the date of purchase from the SELLER or an autho-rized dealer. Should this product fail to be in good working order within 1 year warranty period, The SELLER, at its option, repair or replace the unit, provided that the unit has not been subjected to accident, disaster, abuse or any unauthorized modifications including static discharge and power surge. This warranty is offered by the SELLER for its BUYER with direct transaction only. This warranty is void if the warranty seal on the metal housing is broken. Unit that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair. Such repairs are warranted for 90 days from the day of reshipment to the BUYER. If the unit is delivered by mail, customers agree to insure the unit or assume the risk of loss or damage in transit. Under no circumstances will a unit be accepted without a return authorization number.The warranty is in lieu of all other warranties expressed or implied, including without limitations, any other im-plied warranty or fitness or merchantability for any particular purpose, all of which are expressly disclaimed. Proof of sale may be required in order to claim warranty. Customers outside Taiwan are responsible for shipping charges to and from the SELLER. Cables and power adapters are limited to a 30 day warranty and must be free from any markings, scratches, and neatly coiled.The content of this manual has been carefully checked and is believed to be accurate. However, The SELLER assu-mes no responsibility for any inaccuracies that may be contained in this manual. The SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages.Also, the technical information contained herein regarding the PT-SP-HD14-4K features and specifications is subject to change without further notice.Asking for AssistanceTechnical Support:Phone: +49 5971 800299 - 0Fax: +49 5971 800299 - 99Technical Support Hours:8:30 AM to 5:00 PM Monday thru Thursday8:30 AM to 4:00 PM FridayWrite To:PureLink GmbHVon-Liebig-Straße 10D - 48432 Rheinewww.purelink.de。

由84寸液晶屏与4K画面分割器搭建的画面分割系统4K超高清显示技术自诞生之日起就获了得广泛的关注，关于4K发展的各种论述更是时常成为媒体头条新闻。

ATER作为专业视听领域的领导者，不仅对4K技术的应用关注倍加，还身体力行的推动4K技术的发展。

此前，ATER已推出了110寸4K可视化呈现系统，满足对系统要求极高的用户需求，但因该系统所用材料制造工艺难度大，多数用户不能轻松承担其造价。

现在，ATER推出功能相似但却更加实惠实用的84寸4K可视化呈现系统，期望帮助更多用户实现使用4K大屏显示系统的愿望。

84寸4K可视化呈现系统虽在屏幕大小上比110寸略逊一筹，但却也是五脏俱全，除了显示面积相对比较小之外，其它功能全部具备。

84寸显示屏长约2米，宽约1.1米，目前为止显示面积仅次于110寸。

该系统能充分发挥了4K屏体锐利、细腻的超高清显示，同时还能实现4K画面分割、漫游和叠加等特殊展示效果。

它既能全屏实现震撼的画面效果，又能够实现单屏呈现更多数据，加快数据交互。

其既继承了ATER画面分割系统的固有成熟技术，又完美的将4K超高清显示技术糅合其中，两者通过有机结合充分挖掘了4K屏体的应用价值。

而且该系统比110寸4K可视化呈现系更实惠，让有意使用4K画面分割系统的用户获得触手可及的价格。

为何84寸4K可视化呈现系统实惠？要解答这个问题不妨从屏的制造工艺来看看。

首先，在液晶显示面板生产过程中，经常会出现坏点（永远点亮或永远不亮的像素点），而国内标准指出单个液晶屏的坏点不得超过5个。

110寸面积比84寸面积要大，要避开坏点切割出符合标准的面板实非易事。

按照当前的面板生产水平来说，在84寸范围内寻找出不超过5个坏点的面板却不算太难。

其次，标准化生产中分割110寸面板需要的设备价格不菲，动辄几十亿甚至上百亿，生产成本高。

相对而言，84寸面板的分割设备造价更低。

这两大原因在很大程度上决定了110寸的造价要远高于84寸。

4K HDMI® Splitterswith EDID and ScalingPart Numbers:EVSP12SC 1x2 EVSP14SC 1x4 EVSP18SC 1x84K21. Do not expose this unit to water, moisture, orexcessive humidity.2. Do not install or place this unit in a built-incabinet, or other confined space withoutadequate ventilation.3. To prevent risk of electrical shock or firehazard, due to overheating do not obstructunit’s ventilation openings.4. Do not install near any source of heat,including other units that may produce heat.5. Do not place unit near flames.6. Only clean unit with a dry cloth.7. Unplug unit during lightening storms or when not used for an extended period of time. A surge protector is strongly recommended.8. Protect the power cord from being walked on or pinched, particularly at the plugs.9. Use unit only with accessories specified by the manufacturer.10. Refer all servicing to qualified personnel.CAUTIONHDMI is a very complex technology requiring continuous authentication of the signal and the same video resolution and audio settings on all electronic equipment in the system. When there are multiple sources and displays, the video resolution and audio setting on all connected units must be adjusted to correspond with that of the display having the lowest video and audio capability.WARNINGThis product is 100% inspected and tested in the United States to verifyHDMI performance parameters.800.626.64453INTRODUCTIONThe Evolution by Vanco EVSP12SC, EVSP14SC and EVSP18SC HDMI splitters with 4K, 4:4:4, and HDR pass-through, splits one source signal to multiple displays. These splitters are also able to downscale to 1080p, allowing 4K resolution to be maintained on other outputs. Also features EDID management, with different modes to ensure compatibility with source and display combinations. Supports LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio for advanced audio setups. Take any 4K source and split the signal to multiple displays, while being able to connect both 4K and 1080p displays simultaneously, to ensure the highest quality possible resolution. A great solution for applications with a mix of 4K and 1080p displays!FEATURES4K HDMI® 1x2 Spiltter with EDID and ScalingPart # EVSP12SC• Transmits audio and video from a single source to 2 HDMI outputs up to 4K2K (2160p) Ultra High Definition resolution without any loss of quality or resolution• Supports 4K and 1080p resolutions simultaneously; downscales to 1080p for lower resolution displays while maintaining 4K on other outputs• Supports up to 4K@60Hz with 8 bit YCBCR and 4:4:4 color sampling• Supports up to 4K@60Hz with 10 bit YCBCR, 4:2:0 color sampling and HDR• HDCP 2.2 and 1.4 compliant• Wide frequency range: 25MHz~600MHz• High bandwidth:18Gbps• Features EDID management• Micro-USB firmware update for expanding compatibility• Dimensions: 3.75” W x 2.25” H x 1.6” DPACKAGE CONTENTS• EVSP12SC 4K HDMI 1x2 Splitter• DC 5V Power Supply• Product Manual4• Supports 4K and 1080p resolutions simultaneously; downscales to 1080p for lower resolution displays while maintaining 4K on other outputs• Supports up to 4K@60Hz with 8 bit YCBCR and 4:4:4 color sampling• Supports up to 4K@60Hz with 10 bit YCBCR, 4:2:0 color sampling and HDR• HDCP 2.2 and 1.4 compliant• Wide frequency range: 25MHz~600MHz• High bandwidth: 18Gbps• Features EDID management• Micro-USB firmware update for expanding compatibility• Dimensions: 4.43” W x 3.43” H x 1.6” DPACKAGE CONTENTS• EVSP14SC 4K HDMI 1x4 Splitter• DC 5V Power Supply• Product Manual800.626.644554K HDMI® 1x8 Spiltter with EDID and ScalingPart # EVSP18SC• Transmits audio and video from a single source to 8 HDMI outputs up to 4K2K (2160p) Ultra High Definition resolution without any loss of quality or resolution• Supports 4K and 1080p resolutions simultaneously; downscales to 1080p for lower resolution displays while maintaining 4K on other outputs• Supports up to 4K@60Hz with 8 bit color, and 4:4:4 color sampling• Supports up to 4K@60Hz with 10 bit color, and 4:2:0 color sampling and HDR• HDCP 2.2 and 1.4 compliant• Wide frequency range: 25MHz~600MHz• High bandwidth:18Gbps• Features EDID management• Micro-USB firmware update for expanding compatibility• Dimensions: 9.1” W x 2.7” H x .9” DPACKAGE CONTENTS• EVSP18SC 4K HDMI 1x8 Splitter• DC 5V Power Supply• Product Manual6HDMI 2.0a HDCP 2.2/1.4Video Bandwidth ........................................................600MHz/18GbpsVideo Support ...........................................................HDR 4K@60Hz (4:2:0 10 bits)/ 4k@60Hz (4:4:4 8 bits)Audio Support ...........................................................DTS-HD Master Audio, Dolby TrueHD Dolby Digital, DTS, LPCMESD Protection ..........................................................Human Body model: ±15kV (air-gap discharge) ±8 kV (contact discharge)Firmware Update .......................................................Feasible via Micro-USB portInput Ports ................................................................1 × HDMI (Female type)Output Ports .............................................................2, 4 or 8 × HDMI (Female type)HDMI Connector ........................................................Type A (19-pin female)Dip Switch ................................................................EDID Mode SelectionDimensions ...............................................................1x2: 3.75” W x 2.25” H x 1.6”D; 1x4: 4.43” W x 3.43” H x 1.6” D; 1x8: 9.1” W x 2.7” H x .9” DWeight .....................................................................1x2: 0.2 lbs; 1x4: 0.3 lbs; 1x8: 1 lbsChassis Material ........................................................MetalMounting ..................................................................Wall-Mounting CasePower Supply ............................................................5V 1A DCPower Consumption (Max) ..........................................3 Watts (maximum)Operating Temperature ...............................................0 °C~40 °C/ 32 °F~104 °FStorage Temperature .................................................−20 °C ~ 60 °C/−4 °F ~140 °FRelative Humidity .......................................................20~90 % RH (non-condensing)800.626.64457PANEL DESCRIPTIONSEVSP12SC1. Power LED: Illuminates when the splitter is connected to power2. Micro-USB Port: Connect the included 5V DC power supply to power the unit3. EDID MODE: Default EDID mode has been tested for compatibility with most source and display combinations, however to manually adjust EDID, see below for DIP Switch adjustmentsNOTE: The default settings on the DIP Switch is “OFF” for both switches. OFF is in the “Up” position, while ON is in the “Down” position4. Input Signal LED: Illuminates when the source is connected and powered on5. HDMI IN: Connect a source such as a Set Top Box, Game Console, media player, NVR/DVR, etc.6. Output Signal LED: Illuminates when a display is connected and powered on7. HDMI OUT 1-2: Connect HDMI displays to each outputNOTE: Automatic EDID learning will detect all the connected HDMI displays and will analyze the content. The maximum resolution support will automatically be chosen unless manually adjusted as shown above in the EDID table; Connect the lowest resolution display to output 1Dip Switch PositionOff Off Off On On 81. Power LED: Illuminates when the splitter is connected to power2. Micro-USB Port: Connect the included 5V DC power supply to power the unit3. EDID MODE: Default EDID mode has been tested for compatibility with most source and display combinations, however to manually adjust EDID, see below for DIP Switch adjustments NOTE: The default settings on the DIP Switch is “OFF” for both switches. OFF is in the “Up” position, while ON is in the “Down” position4. Input Signal LED: Illuminates when the source is connected and powered on; Output Signal LED: Illuminates when a display is connected and powered on5. HDMI IN: Connect a source such as a Set Top Box, Game Console, media player, NVR/DVR, etc.; HDMI OUT: Connect HDMI display to the output (remaining outputs are on the opposite side of the unit)6. Output Signal LED: Illuminates when a display is connected and powered on7. HDMI OUT 1-3: Connect HDMI displays to each outputNOTE: Automatic EDID learning will detect all the connected HDMI displays and will analyze the content. The maximum resolution support will automatically be chosen unless manually adjusted as shown above in the EDID table; Connect the lowest resolution display to output 1Off Off Off On On800.626.64459EVSP18SC1.Power LED: Illuminates when the splitter is connected to power2.Input Signal LED: Illuminates when the source is connected and powered on3. Output Signal LED: Illuminates when a display is connected and powered on4. Micro-USB Port: Connect for any available firmware updates (check the product page on under the “downloads” tab)5. EDID MODE: Default EDID mode has been tested for compatibility with most source and displaycombinations, however to manually adjust EDID, see below for EDID settings (turn arrow to select EDID setting with a small flathead screwdriver)0: Ultra HD(4K2K@60) – 8/10/12bit 3D HDR video & 7.1ch audio1: Ultra HD(4K2K@60) – 8/10/12bit 3D HDR video & 2ch audio2: Ultra HD(4K2K@30)(4K2K@60 420) – 8/10/12bit 3D HDR video & 7.1ch audio3: Ultra HD(4K2K@30)(4K2K@60 420) – 8/10/12bit 3D HDR video & 2ch audio4: Full HD(1080p@60) – 12bit 3D video & 7.1ch audio5: Full HD(1080p@60) – 8bit 2D video & 2ch audio6: Learning EDID from output 1 7: Auto EDID analysis learning mode6. HDMI IN: Connect a source such as a Set Top Box, Game Console, media player, NVR/DVR, etc.7. HDMI OUT 1-8: Connect HDMI displays to each output8. Power: Connect the included 5V DC power supply to power the unit101. Ensure all components including splitter, displays, and source are turned off.2. Connect the displays to the splitter, with the lowest resolution display connected to output 13. Connect a source such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver, etc.to the HDMI input4. Plug in 5V DC power supply to power the splitter, then power on the displays, followed by the source NOTE: If using a mix of 4K and 1080p displays, verify resolution on each display by pressing “info” on display remote(s). The splitter will automatically downscale for 1080p displays, as long as lowest resolution display is connected to Output 1.NOTE: If intending to pass HDR, activate HDR on the display’s settings. De-activate HDR if not intending topass HDR.Source InHDTV HDTVHDMIHDMI HDMIHDMI Out 2HDMI Out 1800.626.644511EVSP14SCHDTV HDTV HDTVHDTVSource In HDMI HDMIHDMIHDMIHDMI Out 2HDMI Out 3HDMI Out 4HDMI Out 11. Ensure all components including splitter, displays, and source are turned off.2. Connect the displays to the splitter, with the lowest resolution display connected to output 13. Connect a source such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver, etc. to the HDMI input4. Plug in 5V DC power supply to power the splitter, then power on the displays, followed by the source NOTE: If using a mix of 4K and 1080p displays, verify resolution on each display by pressing “info” on display remote(s). The splitter will automatically downscale for 1080p displays, as long as lowest resolution display is connected to Output 1.NOTE: If intending to pass HDR, activate HDR on the display’s settings. De-activate HDR if not intending to pass HDR.12HDTV HDTV HDTV HDTV HDTV SourceHDMI Out 1 HDMI Out 2HDMI Out 3 HDMI Out 4HDMI Out 5 HDMI Out 6HDMI Out 7HDMI Out 8HDMI InHDTVHDTVHDTV1. Ensure all components including splitter, displays, and source are turned off2. Connect the displays to the splitter, with the lowest resolution display connected to output 13. Connect a source such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver, etc.to the HDMI input4. Plug in 5V DC power supply to power the splitter, then power on the displays, followed by the source NOTE: If using a mix of 4K and 1080p displays, verify resolution on each display by pressing “info” on display remote(s). The splitter will automatically downscale for 1080p displays, as long as lowest resolution display is connected to Output 1NOTE: If intending to pass HDR, activate HDR on the display’s settings. De-activate HDR if not intending to pass HDR800.626.644513FIRMWARE UPDATEA Firmware update can be done when necessary and available through the Micro-USB port. Any available firmware updates will be posted within the “Downloads tab” of this product on .1.Save the firmware file (.bin) & software in the same folder from the product page on the Vanco website 2.Connect the Micro-USB cable to connect the splitter to a Windows based PC 3.Open firmware update software and then device will start to update firmware automatically 4. After update process is completed, the software will display a “Success” message, and then willautomatically close the Firmware Update prompt5. Power cycle the splitter14Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.• Follow all instructions and warnings marked on this unit• Do not attempt to service this unit yourself, except where explained in this manual• Provide proper ventilation and air circulation and do not use near water• Keep objects that might damage the device and assure that the placement of this unit is on a stable surface• Use only the power adapter and power cords and connection cables designed for this unit• Do not use liquid or aerosol cleaners to clean this unit• Always unplug the power to the device before cleaningLIMITED WARRANTYWith the exceptions noted in the next paragraph, Vanco warrants to the original purchaser that the equipment it manufactures or sells will be free from defects in materials and workmanship for a period of two years from the date of purchase. Should this product, in Vanco’s opinion, prove defective within this warranty period, Vanco, at its option, will repair or replace this product without charge. Any defective parts replaced become the property of Vanco. This warranty does not apply to those products which have been damaged due toaccident, unauthorized alterations, improper repair, modifications, inadequate maintenance and care, or use in any manner for which the product was not originally intended.Items integrated into Vanco products that are made by other manufacturers, notably computer hard drives and liquid crystal display panels, are limited to the term of the warranty offered by the respective manufacturers. Such specific warranties are available upon request to Vanco. A surge protector, powerconditioner unit, or an uninterruptible power supply must be installed in the electrical circuit to protect against power surges.If repairs are needed during the warranty period the purchaser will be required to provide a sales receipt/sales invoice or other acceptable proof of purchase to the seller of this equipment. The seller will then contact Vanco regarding warranty repair or replacement.800.626.644515TECHNICAL SUPPORTIn case of problems, please contact Vanco Technical Support by dialing 1-800-626-6445. You can also email **********************************************.When calling, please have the Model Number, Serial Number (affixed to the bottom of the unit) and Invoice available for reference during the call.Please read this Instruction Manual prior to calling or installing this unit, since it will familiarize you with the capabilities of this product and its proper installation.All active electronic products are 100% inspected and tested to insure highest product quality and trouble-free installation and operation. The testing process utilizes the types of high-definition sources and displays typically installed for entertainment and home theater applications.For additional information, such as helpful installation videos, etc. please visit LIABILITY STATEMENTEvery effort has been made to ensure that this product is free of defects. The manufacturer of this product cannot be held liable for the use of this hardware or any direct or indirect consequential damages arising from its use. It is the responsibility of the user and installer of the hardware to check that it is suitable for their requirements and that it is installed correctly. All rights are reserved. No parts of this manual may be reproduced or transmitted by any form or means electronic or mechanical, including photocopying, recording or by any information storage or retrieval system without the written consent of the publisher.Manufacturer reserves the right to revise any of its hardware and software following its policy to modify and/or improve its products where necessary or desirable. This statement does not affect the legal rights of the user in any way.。

vga四画面分割器
vga四画面分割器型号：LCD-F-VGA4X1
4进 1 出vga四画面分割器，带四路视频输入，高像素纯硬件结构设计，在高分辨率的显示设备上以全屏或多窗口模式显示四路视频信息。

vga四画面分割器又称vga分割器，vga视频分割器,vga分屏器，vga合成器，4画面vga画面分割器,4画面分割器，四画面分割器，四路画面分割器。

vga四画面分割器产品简介
LCD-F-VGA4X1型号产品是奥西得研发并生产的四窗口多视频处理器，是专用的视频处理与控制设备，主要功能是在高分辨率的显示设备（平板/投影机）上以全屏或多窗口模式同时显示四路VGA视频信息；也就是将四路VGA视频画面，选择其中的部分通道或者全部通道在同一个显示器件上分割显示。

vga四画面分割器产品参数
∙视频输入：VGA或者复合视频(标准）
∙视频输出：VGA
∙亮色度干扰: -55dB@5Mhz
∙电源交流电压: 180-240V/50Hz
∙输出分辨率：1024×768@60Hz
∙控制类型: RS-232
∙无线技术: IR 红外遥控
∙功率消耗: 单路最大6W
∙图象控制：全屏显示，缩放，漫游，画中画，叠加
∙工作温度: 0～60℃
∙工作湿度: 5～95％RH
∙机箱规格: 2U-8U标准机架机箱，甚至更小
∙
VGA画面分割器实际上可以称为多媒体画面分割器，VGA画面分割器用硬件方法解决计算机信号画面单屏幕分割显示,可以让一台投影机（或显示器）同时显示多个计算机画面或者同时显示多个VIDEO视频画面（如摄像机、DVD播放机等），也可以同时显示多个计算机与视频的混合画面。

可以定做二至四十八画面分割器。