C语言常见错误提示信息的英汉对照

1. Ambiguous operators need parentheses — 不明确的运算需要用括号括起2. Ambiguous symbol 'xxx' — 不明确的符号3. Argument list syntax error — 参数表语法错误4. Array bounds missing — 丢失数组界限符5. Array size toolarge — 数组尺寸太大6. Bad character in paramenters — 参数中有不适当的字符7. Bad file name format in include directive — 包含命令中文件名格式不正确8. Bad ifdef directive synatax — 编译预处理ifdef有语法错9. Bad undef directive syntax — 编译预处理undef有语法错10. Bit field too large — 位字段太长11. Call of non-function — 调用未定义的函数12. Call to function with no prototype — 调用函数时没有函数的说明13. Cannot modify a const object — 不允许修改常量对象14. Case outside of switch — 漏掉了case 语句15. Case syntax error — Case 语法错误16. Code has no effect — 代码不可能执行到17. Compound statement missing{ — 分程序漏掉"{"18. Conflicting type modifiers — 不明确的类型说明符19. Constant expression required — 要求常量表达式20. Constant out of range in comparison — 在比较中常量超出范围21. Conversion may lose significant digits — 转换时会丢失意义的数字22. Conversion of near pointer not allowed — 不允许转换近指针23. Could not find file 'xxx' — 找不到XXX文件24. Declaration missing ; — 说明缺少"；"25. Declaration syntax error — 说明中出现语法错误26. Default outside of switch — Default 出现在switch语句之外27. Define directive needs an identifier — 定义编译预处理需要标识符28. Division by zero — 用零作除数29. Do statement must have while — Do-while语句中缺少while部分30. Enum syntax error — 枚举类型语法错误31. Enumeration constant syntax error — 枚举常数语法错误32. Error directive :xxx — 错误的编译预处理命令33. Error writing output file — 写输出文件错误34. Expression syntax error — 表达式语法错误35. Extra parameter in call — 调用时出现多余错误36. File name too long — 文件名太长37. Function call missing ) — 函数调用缺少右括号38. Fuction definition out of place — 函数定义位置错误39. Fuction should return a value — 函数必需返回一个值40. Goto statement missing label — Goto语句没有标号41. Hexadecimal or octal constant too large — 16进制或8进制常数太大42. Illegal character 'x' — 非法字符x43. Illegal initialization — 非法的初始化44. Illegal octal digit — 非法的8进制数字45. Illegal pointer subtraction — 非法的指针相减46. Illegal structure operation — 非法的结构体操作47. Illegal use of floating point — 非法的浮点运算48. Illegal use of pointer — 指针使用非法49. Improper use of a typedefsymbol — 类型定义符号使用不恰当50. In-line assembly not allowed — 不允许使用行间汇编51. Incompatible storage class — 存储类别不相容52. Incompatible type conversion — 不相容的类型转换53. Incorrect number format — 错误的数据格式54. Incorrect use of default — Default使用不当55. Invalid indirection — 无效的间接运算56. Invalid pointer addition — 指针相加无效57. Irreducible expression tree — 无法执行的表达式运算58. Lvalue required — 需要逻辑值0或非0值59. Macro argument syntax error — 宏参数语法错误60. Macro expansion too long — 宏的扩展以后太长61. Mismatched number of parameters in definition — 定义中参数个数不匹配62. Misplaced break — 此处不应出现break语句63. Misplaced continue — 此处不应出现continue语句64. Misplaced decimal point — 此处不应出现小数点65. Misplaced elif directive — 不应编译预处理elif66. Misplaced else — 此处不应出现else67. Misplaced else directive — 此处不应出现编译预处理else68. Misplaced endif directive — 此处不应出现编译预处理endif69. Must be addressable — 必须是可以编址的70. Must take address of memory location — 必须存储定位的地址71. No declaration for function 'xxx' — 没有函数xxx的说明72. No stack — 缺少堆栈73. No type information — 没有类型信息74. Non-portable pointer assignment — 不可移动的指针（地址常数）赋值75. Non-portable pointer comparison — 不可移动的指针（地址常数）比较76. Non-portable pointer conversion — 不可移动的指针（地址常数）转换77. Not a valid expression format type — 不合法的表达式格式78. Not an allowed type — 不允许使用的类型79. Numeric constant too large — 数值常太大80. Out of memory — 内存不够用81. Parameter 'xxx' is never used — 能数xxx没有用到82. Pointer required on left side of -> — 符号->的左边必须是指针83. Possible use of 'xxx' before definition — 在定义之前就使用了xxx（警告）84. Possibly incorrect assignment — 赋值可能不正确85. Redeclaration of 'xxx' — 重复定义了xxx86. Redefinition of 'xxx' is not identical — xxx的两次定义不一致87. Register allocation failure — 寄存器定址失败88. Repeat count needs an lvalue — 重复计数需要逻辑值89. Size of structure or array not known — 结构体或数给大小不确定90. Statement missing ; — 语句后缺少"；"91. Structure or union syntax error — 结构体或联合体语法错误92. Structure size too large — 结构体尺寸太大93. Sub scripting missing ] — 下标缺少右方括号94. Superfluous & with function or array — 函数或数组中有多余的"&"95. Suspicious pointer conversion — 可疑的指针转换96. Symbol limit exceeded — 符号超限97. Too few parameters in call — 函数调用时的实参少于函数的参数不98. Too many default cases — Default太多(switch语句中一个)99. Too many error or warning messages — 错误或警告信息太多100. Too many type in declaration — 说明中类型太多101. Too much auto memory in function — 函数用到的局部存储太多102. Too much global data defined in file — 文件中全局数据太多103. Two consecutive dots — 两个连续的句点104. Type mismatch in parameter xxx — 参数xxx类型不匹配105. Type mismatch in redeclaration of 'xxx' — xxx重定义的类型不匹配106. Unable to create output file 'xxx' — 无法建立输出文件xxx107. Unable to open include file 'xxx' — 无法打开被包含的文件xxx 108. Unable to open input file 'xxx' — 无法打开输入文件xxx109. Undefined label 'xxx' — 没有定义的标号xxx110. Undefined structure 'xxx' — 没有定义的结构xxx111. Undefined symbol 'xxx' — 没有定义的符号xxx112. Unexpected end of file in comment started on line xxx — 从xxx行开始的注解尚未结束文件不能结束113. Unexpected end of file in conditional started on line xxx — 从xxx 开始的条件语句尚未结束文件不能结束114. Unknown assemble instruction — 未知的汇编结构115. Unknown option — 未知的操作116. Unknown preprocessor directive: 'xxx' — 不认识的预处理命令xxx117. Unreachable code — 无路可达的代码118. Unterminated string or character constant — 字符串缺少引号119. User break — 用户强行中断了程序120. Void functions may not return a value — Void类型的函数不应有返回值121. Wrong number of arguments — 调用函数的参数数目错122. 'xxx' not an argument — xxx不是参数123. 'xxx' not part of structure — xxx不是结构体的一部分124. xxx statement missing ( — xxx语句缺少左括号125. xxx statement missing ) — xxx语句缺少右括号126. xxx statement missing ; — xxx缺少分号127. xxx' declared but never used — 说明了xxx但没有使用128. xxx' is assigned a value which is never used — 给xxx赋了值但未用过。

Ambiguous operators need parentheses 不明确的运算需要用括号括起Ambiguous symbol ''xxx''不明确的符号Argument list syntax error参数表语法错误Array bounds missing丢失数组界限符Array size toolarge数组尺寸太大Bad character in paramenters参数中有不适当的字符Bad file name format in include directive 包含命令中文件名格式不正确Bad ifdef directive synatax编译预处理ifdef有语法错Bad undef directive syntax编译预处理undef有语法错Bit field too large位字段太长Call of non-function调用未定义的函数Call to function with no prototype调用函数时没有函数的说明Cannot modify a const object不允许修改常量对象Case outside of switch漏掉了case 语句Case syntax errorCase 语法错误Code has no effect代码不可述不可能执行到Compound statement missing{分程序漏掉"{"Conflicting type modifiers不明确的类型说明符Constant expression required要求常量表达式Constant out of range in comparison在比较中常量超出范围Conversion may lose significant digits转换时会丢失意义的数字Conversion of near pointer not allowed 不允许转换近指针Could not find file ''xxx''找不到XXX文件Declaration missing ;说明缺少"；"Declaration syntax error说明中出现语法错误Default outside of switchDefault 出现在switch语句之外Define directive needs an identifier定义编译预处理需要标识符Division by zero用零作除数Do statement must have whileDo-while语句中缺少while部分Enum syntax error枚举类型语法错误Enumeration constant syntax error枚举常数语法错误Error directive :xxx错误的编译预处理命令Error writing output file写输出文件错误Expression syntax error表达式语法错误Extra parameter in call调用时出现多余错误File name too long文件名太长Function call missing )函数调用缺少右括号Fuction definition out of place函数定义位置错误Fuction should return a value函数必需返回一个值Goto statement missing labelGoto语句没有标号Hexadecimal or octal constant too large 16进制或8进制常数太大Illegal character ''x''非法字符xIllegal initialization非法的初始化Illegal octal digit非法的8进制数字Illegal pointer subtraction非法的指针相减Illegal structure operation非法的结构体操作Illegal use of floating point非法的浮点运算Illegal use of pointer指针使用非法Improper use of a typedefsymbol类型定义符号使用不恰当In-line assembly not allowed不允许使用行间汇编Incompatible storage class存储类别不相容Incompatible type conversion不相容的类型转换Incorrect number format错误的数据格式Incorrect use of defaultDefault使用不当Invalid indirection无效的间接运算Invalid pointer addition指针相加无效Irreducible expression tree无法执行的表达式运算Lvalue required需要逻辑值0或非0值Macro argument syntax error宏参数语法错误Macro expansion too long宏的扩展以后太长Mismatched number of parameters in definition 定义中参数个数不匹配Misplaced break此处不应出现break语句Misplaced continue此处不应出现continue语句Misplaced decimal point此处不应出现小数点Misplaced elif directive不应编译预处理elifMisplaced else此处不应出现elseMisplaced else directive此处不应出现编译预处理else Misplaced endif directive此处不应出现编译预处理endif Must be addressable必须是可以编址的Must take address of memory location 必须存储定位的地址No declaration for function ''xxx''没有函数xxx的说明No stack缺少堆栈No type information没有类型信息Non-portable pointer assignment不可移动的指针（地址常数）赋值Non-portable pointer comparison不可移动的指针（地址常数）比较Non-portable pointer conversion不可移动的指针（地址常数）转换Not a valid expression format type不合法的表达式格式Not an allowed type不允许使用的类型Numeric constant too large数值常太大Out of memory内存不够用Parameter ''xxx'' is never used能数xxx没有用到Pointer required on left side of ->符号->的左边必须是指针Possible use of ''xxx'' before definition 在定义之前就使用了xxx（警告）Possibly incorrect assignment赋值可能不正确Redeclaration of ''xxx''重复定义了xxxRedefinition of ''xxx'' is not identical xxx的两次定义不一致Register allocation failure寄存器定址失败Repeat count needs an lvalue重复计数需要逻辑值Size of structure or array not known结构体或数给大小不确定Statement missing ;语句后缺少"；"Structure or union syntax error结构体或联合体语法错误Structure size too large结构体尺寸太大Sub scripting missing ]下标缺少右方括号Superfluous & with function or array函数或数组中有多余的"&" Suspicious pointer conversion可疑的指针转换Symbol limit exceeded符号超限Too few parameters in call函数调用时的实参少于函数的参数不Too many default casesDefault太多(switch语句中一个)Too many error or warning messages错误或警告信息太多Too many type in declaration说明中类型太多Too much auto memory in function函数用到的局部存储太多Too much global data defined in file文件中全局数据太多Two consecutive dots两个连续的句点Type mismatch in parameter xxx参数xxx类型不匹配Type mismatch in redeclaration of ''xxx'' xxx重定义的类型不匹配Unable to create output file ''xxx''无法建立输出文件xxxUnable to open include file ''xxx''无法打开被包含的文件xxxUnable to open input file ''xxx''无法打开输入文件xxxUndefined label ''xxx''没有定义的标号xxxUndefined structure ''xxx''没有定义的结构xxxUndefined symbol ''xxx''没有定义的符号xxxUnexpected end of file in comment started on line xxx 从xxx行开始的注解尚未结束文件不能结束Unexpected end of file in conditional started on line xxx 从xxx 开始的条件语句尚未结束文件不能结束Unknown assemble instruction未知的汇编结构Unknown option未知的操作Unknown preprocessor directive: ''xxx''不认识的预处理命令xxxUnreachable code无路可达的代码Unterminated string or character constant字符串缺少引号User break用户强行中断了程序Void functions may not return a valueVoid类型的函数不应有返回值Wrong number of arguments调用函数的参数数目错''xxx'' not an argumentxxx不是参数''xxx'' not part of structurexxx不是结构体的一部分xxx statement missing (xxx语句缺少左括号xxx statement missing )xxx语句缺少右括号xxx statement missing ;xxx缺少分号xxx'' declared but never used说明了xxx但没有使用xxx'' is assigned a value which is never used给xxx赋了值但未用过Zero length structure结构体的长度为零。

C++常见的编译错误中英对应翻译对于刚学编程，刚接触C++的新手来说，编译运行报错是最头疼的一件事，爆出一堆英文，英语差一点的又不知道什么意思，所以也不知道如何去改，在此，我给大家传一份常见错误中英文对照表及简单解释，希望可以帮到大家：fatal error C1003: error count exceeds number; stopping compilation中文对照：（编译错误）错误太多，停止编译分析：修改之前的错误，再次编译fatal error C1004: unexpected end of file found中文对照：（编译错误）文件未结束分析：一个函数或者一个结构定义缺少“}”、或者在一个函数调用或表达式中括号没有配对出现、或者注释符“/*…*/”不完整等fatal error C1083: Cannot open include file: 'xxx': No such file or directory中文对照：（编译错误）无法打开头文件xxx：没有这个文件或路径分析：头文件不存在、或者头文件拼写错误、或者文件为只读fatal error C1903: unable to recover from previous error(s); stopping compilation中文对照：（编译错误）无法从之前的错误中恢复，停止编译分析：引起错误的原因很多，建议先修改之前的错误error C2001: newline in constant中文对照：（编译错误）常量中创建新行分析：字符串常量多行书写error C2006: #include expected a filename, found 'identifier'中文对照：（编译错误）#include命令中需要文件名分析：一般是头文件未用一对双引号或尖括号括起来，例如“#include stdio.h”error C2007: #define syntax中文对照：（编译错误）#define语法错误分析：例如“#define”后缺少宏名，例如“#define”error C2008: 'xxx' : unexpected in macro definition中文对照：（编译错误）宏定义时出现了意外的xxx分析：宏定义时宏名与替换串之间应有空格，例如“#define TRUE"1"”error C2009: reuse of macro formal 'identifier'中文对照：（编译错误）带参宏的形式参数重复使用分析：宏定义如有参数不能重名，例如“#define s(a,a) (a*a)”中参数a重复error C2010: 'character' : unexpected in macro formal parameter list中文对照：（编译错误）带参宏的形式参数表中出现未知字符分析：例如“#define s(r|) r*r”中参数多了一个字符‘|’error C2014: preprocessor command must start as first nonwhite space中文对照：（编译错误）预处理命令前面只允许空格分析：每一条预处理命令都应独占一行，不应出现其他非空格字符error C2015: too many characters in constant中文对照：（编译错误）常量中包含多个字符分析：字符型常量的单引号中只能有一个字符，或是以“\”开始的一个转义字符，例如“char error = 'error';”error C2017: illegal escape sequence中文对照：（编译错误）转义字符非法分析：一般是转义字符位于' ' 或" " 之外，例如“char error = ' '\n;”error C2018: unknown character '0xhh'中文对照：（编译错误）未知的字符0xhh分析：一般是输入了中文标点符号，例如“char error = 'E'；”中“；”为中文标点符号error C2019: expected preprocessor directive, found 'character'中文对照：（编译错误）期待预处理命令，但有无效字符分析：一般是预处理命令的#号后误输入其他无效字符，例如“#!define TRUE 1”error C2021: expected exponent value, not 'character'中文对照：（编译错误）期待指数值，不能是字符分析：一般是浮点数的指数表示形式有误，例如123.456Eerror C2039: 'identifier1' : is not a member of 'identifier2'中文对照：（编译错误）标识符1不是标识符2的成员分析：程序错误地调用或引用结构体、共用体、类的成员error C2041: illegal digit 'x' for base 'n'中文对照：（编译错误）对于n进制来说数字x非法分析：一般是八进制或十六进制数表示错误，例如“int i = 081;”语句中数字‘8’不是八进制的基数error C2048: more than one default中文对照：（编译错误）default语句多于一个分析：switch语句中只能有一个default，删去多余的defaulterror C2050: switch expression not integral中文对照：（编译错误）switch表达式不是整型的分析：switch表达式必须是整型（或字符型），例如“switch ("a")”中表达式为字符串，这是非法的error C2051: case expression not constant中文对照：（编译错误）case表达式不是常量分析：case表达式应为常量表达式，例如“case "a"”中“"a"”为字符串，这是非法的error C2052: 'type' : illegal type for case expression中文对照：（编译错误）case表达式类型非法分析：case表达式必须是一个整型常量（包括字符型）error C2057: expected constant expression中文对照：（编译错误）期待常量表达式分析：一般是定义数组时数组长度为变量，例如“int n=10; int a[n];”中n为变量，这是非法的error C2058: constant expression is not integral中文对照：（编译错误）常量表达式不是整数分析：一般是定义数组时数组长度不是整型常量error C2059: syntax error : 'xxx'中文对照：（编译错误）‘xxx’语法错误分析：引起错误的原因很多，可能多加或少加了符号xxxerror C2064: term does not evaluate to a function中文对照：（编译错误）无法识别函数语言分析：1、函数参数有误，表达式可能不正确，例如“sqrt(s(s-a)(s-b)(s-c));”中表达式不正确2、变量与函数重名或该标识符不是函数，例如“int i,j; j=i();”中i不是函数error C2065: 'xxx' : undeclared identifier中文对照：（编译错误）未定义的标识符xxx分析：1、如果xxx为cout、cin、scanf、printf、sqrt等，则程序中包含头文件有误2、未定义变量、数组、函数原型等，注意拼写错误或区分大小写。

C语言常见错误提示信息的英汉对照常见错误提示信息的英汉对照Ambiguous operators need parentheses : 不明确的运算需要用括号括起Ambiguous symbol ’xxx’ : 不明确的符号Argument list syntax error : 参数表语法错误Array bounds missing : 丢失数组界限符Array size toolarge : 数组尺寸太大Bad character in paramenters :参数中有不适当的字符Bad file name format in include directive :包含命令中文件名格式不正确Bad ifdef directive synatax :编译预处理ifdef有语法错Bad undef directive syntax :编译预处理undef有语法错Bit field too large :位字段太长Call of non-function :调用未定义的函数Call to function with no prototype :调用函数时没有函数的说明Cannot modify a const object :不允许修改常量对象Case outside of switch: 漏掉了case 语句Case syntax error :Case 语法错误Code has no effect 代码不可述不可能执行到Compound statement missing{ 分程序漏掉"{"Conflicting type modifiers 不明确的类型说明符Constant expression required 要求常量表达式Constant out of range in comparison 在比较中常量超出范围Conversion may lose significant digits 转换时会丢失意义的数字Conversion of near pointer not allowed 不允许转换近指针Could not find file ’xxx’ 找不到XXX文件Declaration missing ; 说明缺少"；"Declaration syntax error 说明中出现语法错误Default outside of switch Default 出现在switch语句之外Define directive needs an identifier 定义编译预处理需要标识符Division by zero 用零作除数Do statement must have while Do-while语句中缺少while部分Enum syntax error 枚举类型语法错误Enumeration constant syntax error 枚举常数语法错误Error directive :xxx 错误的编译预处理命令Error writing output file 写输出文件错误Expression syntax error 表达式语法错误Extra parameter in call 调用时出现多余错误File name too long 文件名太长Function call missing ) 函数调用缺少右括号Fuction definition out of place 函数定义位置错误Fuction should return a value 函数必需返回一个值Goto statement missing label Goto语句没有标号Hexadecimal or octal constant too large 16进制或8进制常数太大Illegal character ’x’ 非法字符xIllegal initialization 非法的初始化Illegal octal digit 非法的8进制数字Illegal pointer subtraction 非法的指针相减Illegal structure operation 非法的结构体操作Illegal use of floating point 非法的浮点运算Illegal use of pointer 指针使用非法Improper use of a typedefsymbol 类型定义符号使用不恰当In-line assembly not allowed 不允许使用行间汇编Incompatible storage class 存储类别不相容Incompatible type conversion 不相容的类型转换Incorrect number format 错误的数据格式Incorrect use of default Default使用不当Invalid indirection 无效的间接运算Invalid pointer addition 指针相加无效Irreducible expression tree 无法执行的表达式运算Lvalue required 需要逻辑值0或非0值Macro argument syntax error 宏参数语法错误Macro expansion too long 宏的扩展以后太长Mismatched number of parameters in definition 定义中参数个数不匹配Misplaced break 此处不应出现break语句Misplaced continue 此处不应出现continue语句Misplaced decimal point 此处不应出现小数点Misplaced elif directive 不应编译预处理elif Misplaced else 此处不应出现elseMisplaced else directive 此处不应出现编译预处理else Misplaced endif directive 此处不应出现编译预处理endif Must be addressable 必须是可以编址的Must take address of memory location 必须存储定位的地址No declaration for function ’xxx’ 没有函数xxx的说明No stack 缺少堆栈No type information 没有类型信息Non-portable pointer assignment 不可移动的指针（地址常数）赋值Non-portable pointer comparison 不可移动的指针（地址常数）比较Non-portable pointer conversion 不可移动的指针（地址常数）转换Not a valid expression format type 不合法的表达式格式Not an allowed type 不允许使用的类型Numeric constant too large 数值常太大Out of memory 内存不够用Parameter ’xxx’ is never used 能数xxx没有用到Pointer required on left side of -> 符号->的左边必须是指针Possible use of ’xxx’ before definition 在定义之前就使用了xxx（警告）Possibly incorrect assignment 赋值可能不正确Redeclaration of ’xxx’ 重复定义了xxx Redefinition of ’xxx’ is not identical x xx的两次定义不一致Register allocation failure 寄存器定址失败Repeat count needs an lvalue 重复计数需要逻辑值Size of structure or array not known 结构体或数给大小不确定Statement missing ; 语句后缺少"；"Structure or union syntax error 结构体或联合体语法错误Structure size too large 结构体尺寸太大Sub scripting missing ] 下标缺少右方括号Superfluous & with function or array 函数或数组中有多余的"&"Suspicious pointer conversion 可疑的指针转换Symbol limit exceeded 符号超限Too few parameters in call 函数调用时的实参少于函数的参数Too many default cases Default太多(switch语句中一个)Too many error or warning messages 错误或警告信息太多Too many type in declaration 说明中类型太多Too much auto memory in function 函数用到的局部存储太多Too much global data defined in file 文件中全局数据太多Two consecutive dots 两个连续的句点Type mismatch in parameter xxx 参数xxx类型不匹配Type mismatch in redeclaration of ’xxx’ xxx重定义的类型不匹配Unable to create output file ’xxx’ 无法建立输出文件xxx Unable to open include file ’xxx’ 无法打开被包含的文件xxx Unable to open input file ’xxx’ 无法打开输入文件xxx Undefined label ’xxx’ 没有定义的标号xxx Undefined structure ’xxx’ 没有定义的结构xxx Undefined symbol ’xxx’ 没有定义的符号xxx Unexpected end of file in comment started on line xxx 从xxx行开始的注解尚未结束文件不能结束Unexpected end of file in conditional started on line xxx 从xxx 开始的条件语句尚未结束文件不能结束Unknown assemble instruction 未知的汇编结构Unknown option 未知的操作Unknown preprocessor directive: ’xxx’ 不认识的预处理命令xxx Unreachable code 无路可达的代码Unterminated string or character constant 字符串缺少引号User break 用户强行中断了程序Void functions may not return a value Void类型的函数不应有返回值Wrong number of arguments ：调用函数的参数数目错‘xxx’ not an argument :xxx不是参数‘xxx’ not part o f struc ture xxx不是结构体的一部分xxx statement missing ( xxx语句缺少左括号xxx statement missing ) xxx语句缺少右括号xxx statement missing ; xxx缺少分号xxx’ declared but never used 说明了xxx但没有使用xxx’ is assigned a value which is never used 给xxx赋了值但未用过。

C++常见错误中英文对照表fatal error C1003: error count exceeds number; stopping compilation 中文对照：（编译错误）错误太多，停止编译分析：修改之前的错误，再次编译fatal error C1004: unexpected end of file found 中文对照：（编译错误）文件未结束分析：一个函数或者一个结构定义缺少“}”、或者在一个函数调用或表达式中括号没有配对出现、或者注释符“/*…*/”不完整等fatal error C1010: 在查找预编译头时遇到意外的文件结尾。

是否忘记了向源中添加“#include "stdafx.h"”?解决1：关闭.CPP文件的"使用预编译头"的选项右键选择该文件->属性->预编译头，选"不使用预编译头"解决2: 直接在工程设置里关闭使用预编译头的选项。

步骤和上一方法类似fatal error C1083: Cannot open include file: 'xxx': No such file or directory 中文对照：（编译错误）无法打开头文件xxx：没有这个文件或路径分析：头文件不存在、或者头文件拼写错误、或者文件为只读error BK1506 : cannot open file '.\Debug\StdAfx.sbr': No such file or directory右键当前工程-》设置-》浏览信息-》取消创建创建浏览信息fatal error C1903: unable to recover from previous error(s); stopping compilation 中文对照：（编译错误）无法从之前的错误中恢复，停止编译分析：引起错误的原因很多，建议先修改之前的错误error C2001: newline in constant 中文对照：（编译错误）常量中创建新行分析：字符串常量多行书写error C2006: #include expected a filename, found 'identifier' 中文对照：（编译错误）#include命令中需要文件名分析：一般是头文件未用一对双引号或尖括号括起来，例如“#include stdio.h”error C2007: #define syntax 中文对照：（编译错误）#define语法错误分析：例如“#define”后缺少宏名，例如“#define”error C2008: 'xxx' : unexpected in macro definition 中文对照：（编译错误）宏定义时出现了意外的xxx 分析：宏定义时宏名与替换串之间应有空格，例如“#define TRUE"1"”error C2009: reuse of macro formal 'identifier' 中文对照：（编译错误）带参宏的形式参数重复使用分析：宏定义如有参数不能重名，例如“#define s(a,a) (a*a)”中参数a重复error C2010: 'character' : unexpected in macro formal parameter list 中文对照：（编译错误）带参宏的形式参数表中出现未知字符分析：例如“#define s(r|) r*r”中参数多了一个字符‘|’error C2014: preprocessor command must start as first nonwhite space 中文对照：（编译错误）预处理命令前面只允许空格分析：每一条预处理命令都应独占一行，不应出现其他非空格字符error C2015: too many characters in constant 中文对照：（编译错误）常量中包含多个字符分析：字符型常量的单引号中只能有一个字符，或是以“\”开始的一个转义字符，例如“char error = 'error';”error C2017: illegal escape sequence 中文对照：（编译错误）转义字符非法分析：一般是转义字符位于' ' 或" " 之外，例如“char error = ' '\n;” error C2018: unknown character '0xhh' 中文对照：（编译错误）未知的字符0xhh 分析：一般是输入了中文标点符号，例如“char error = 'E'；”中“；”为中文标点符号error C2019: expected preprocessor directive, found 'character' 中文对照：（编译错误）期待预处理命令，但有无效字符分析：一般是预处理命令的#号后误输入其他无效字符，例如“#!define TRUE 1”error C2021: expected exponent value, not 'character' 中文对照：（编译错误）期待指数值，不能是字符分析：一般是浮点数的指数表示形式有误，例如123.456Eerror C2039: 'identifier1' : is not a member of 'identifier2' 中文对照：（编译错误）标识符1不是标识符2的成员分析：程序错误地调用或引用结构体、共用体、类的成员或者是变量名与变量不符。

(二)、一般错误信息英汉照及处理方法#operator not followed by maco argument name(#运算符后没跟宏变元名)分析与处理：在宏定义中，#用于标识一宏变串。

“#”号后必须跟一个宏变元名。

'xxxxxx' not anargument ('xxxxxx'不是函数参数)分析与处理：在源程序中将该标识符定义为一个函数参数，但此标识符没有在函数中出现。

Ambiguous symbol 'xxxxxx' (二义性符号'xxxxxx')分析与处理：两个或多个结构的某一域名相同，但具有的偏移、类型不同。

在变量或表达式中引用该域而未带结构名时，会产生二义性，此时需修改某个域名或在引用时加上结构名。

Argument # missing name (参数#名丢失)分析与处理：参数名已脱离用于定义函数的函数原型。

如果函数以原型定义，该函数必须包含所有的参数名。

Argument list syntax error (参数表出现语法错误)分析与处理：函数调用的参数间必须以逗号隔开，并以一个右括号结束。

若源文件中含有一个其后不是逗号也不是右括号的参数，则出错。

Array bounds missing (数组的界限符"]"丢失)分析与处理：在源文件中定义了一个数组，但此数组没有以下右方括号结束。

Array size too large (数组太大)分析与处理：定义的数组太大，超过了可用内存空间。

Assembler statement too long (汇编语句太长)分析与处理：内部汇编语句最长不能超过480字节。

Bad configuration file (配置文件不正确)分析与处理：TURBOC.CFG配置文件中包含的不是合适命令行选择项的非注解文字。

配置文件命令选择项必须以一个短横线开始。

Bad file name format in include directive(包含指令中文件名格式不正确)分析与处理：包含文件名必须用引号("filename.h")或尖括号(<filename>)括起来，否则将产生本类错误。

Ambiguous operators need parentheses -----------不明确的运算需要用括号括起Ambiguous symbol ''xxx'' ----------------不明确的符号Argument list syntax error ----------------参数表语法错误Array bounds missing ------------------丢失数组界限符Array size toolarge -----------------数组尺寸太大Bad character in paramenters ------------------参数中有不适当的字符Bad file name format in include directive --------------------包含命令中文件名格式不正确Bad ifdef directive synatax ------------------------------编译预处理ifdef有语法错Bad undef directive syntax ---------------------------编译预处理undef有语法错Bit field too large ----------------位字段太长Call of non-function -----------------调用未定义的函数Call to function with no prototype ---------------调用函数时没有函数的说明Cannot modify a const object ---------------不允许修改常量对象Case outside of switch ----------------漏掉了case 语句Case syntax error ------------------ Case 语法错误Code has no effect -----------------代码不可述不可能执行到Compound statement missing{ --------------------分程序漏掉"{"Conflicting type modifiers ------------------不明确的类型说明符Constant expression required ----------------要求常量表达式Constant out of range in comparison -----------------在比较中常量超出范围Conversion may lose significant digits -----------------转换时会丢失意义的数字Conversion of near pointer not allowed -----------------不允许转换近指针Could not find file ''xxx'' -----------------------找不到XXX文件Declaration missing ; ----------------说明缺少"；"Declaration syntax error -----------------说明中出现语法错误Default outside of switch ------------------ Default 出现在switch语句之外Define directive needs an identifier ------------------定义编译预处理需要标识符Division by zero ------------------用零作除数Do statement must have while ------------------ Do-while语句中缺少while部分Enum syntax error ---------------------枚举类型语法错误Enumeration constant syntax error -----------------枚举常数语法错误Error directive :xxx ------------------------错误的编译预处理命令Error writing output file ---------------------写输出文件错误Expression syntax error -----------------------表达式语法错误Extra parameter in call ------------------------调用时出现多余错误File name too long ----------------文件名太长Function call missing -----------------函数调用缺少右括号Fuction definition out of place ------------------函数定义位置错误Fuction should return a value ------------------函数必需返回一个值Goto statement missing label ------------------ Goto语句没有标号Hexadecimal or octal constant too large ------------------16进制或8进制常数太大Illegal character ''x'' ------------------非法字符xIllegal initialization ------------------非法的初始化Illegal octal digit ------------------非法的8进制数字Illegal pointer subtraction ------------------非法的指针相减Illegal structure operation ------------------非法的结构体操作Illegal use of floating point -----------------非法的浮点运算Illegal use of pointer --------------------指针使用非法Improper use of a typedefsymbol ----------------类型定义符号使用不恰当In-line assembly not allowed -----------------不允许使用行间汇编Incompatible storage class -----------------存储类别不相容Incompatible type conversion --------------------不相容的类型转换Incorrect number format -----------------------错误的数据格式Incorrect use of default --------------------- Default使用不当Invalid indirection ---------------------无效的间接运算Invalid pointer addition ------------------指针相加无效Irreducible expression tree -----------------------无法执行的表达式运算Lvalue required ---------------------------需要逻辑值0或非0值Macro argument syntax error -------------------宏参数语法错误Macro expansion too long ----------------------宏的扩展以后太长Mismatched number of parameters in definition ---------------------定义中参数个数不匹配Misplaced break ---------------------此处不应出现break语句Misplaced continue ------------------------此处不应出现continue语句Misplaced decimal point --------------------此处不应出现小数点Misplaced elif directive --------------------不应编译预处理elifMisplaced else ----------------------此处不应出现elseMisplaced else directive ------------------此处不应出现编译预处理elseMisplaced endif directive -------------------此处不应出现编译预处理endifMust be addressable ----------------------必须是可以编址的Must take address of memory location ------------------必须存储定位的地址No declaration for function ''xxx'' -------------------没有函数xxx的说明No stack ---------------缺少堆栈No type information ------------------没有类型信息Non-portable pointer assignment --------------------不可移动的指针（地址常数）赋值Non-portable pointer comparison --------------------不可移动的指针（地址常数）比较Non-portable pointer conversion ----------------------不可移动的指针（地址常数）转换Not a valid expression format type ---------------------不合法的表达式格式Not an allowed type ---------------------不允许使用的类型Numeric constant too large -------------------数值常太大Out of memory -------------------内存不够用Parameter ''xxx'' is never used ------------------能数xxx没有用到Pointer required on left side of -> -----------------------符号->的左边必须是指针Possible use of ''xxx'' before definition -------------------在定义之前就使用了xxx（警告）Possibly incorrect assignment ----------------赋值可能不正确Redeclaration of ''xxx'' -------------------重复定义了xxxRedefinition of ''xxx'' is not identical ------------------- xxx的两次定义不一致Register allocation failure ------------------寄存器定址失败Repeat count needs an lvalue ------------------重复计数需要逻辑值Size of structure or array not known ------------------结构体或数给大小不确定Statement missing ; ------------------语句后缺少"；"Structure or union syntax error --------------结构体或联合体语法错误Structure size too large ----------------结构体尺寸太大Sub scripting missing ] ----------------下标缺少右方括号Superfluous & with function or array ------------------函数或数组中有多余的"&"Suspicious pointer conversion ---------------------可疑的指针转换Symbol limit exceeded ---------------符号超限Too few parameters in call -----------------函数调用时的实参少于函数的参数不Too many default cases ------------------- Default太多(switch语句中一个)Too many error or warning messages --------------------错误或警告信息太多Too many type in declaration -----------------说明中类型太多Too much auto memory in function -----------------函数用到的局部存储太多Too much global data defined in file ------------------文件中全局数据太多Two consecutive dots -----------------两个连续的句点Type mismatch in parameter xxx ----------------参数xxx类型不匹配Type mismatch in redeclaration of ''xxx'' ---------------- xxx重定义的类型不匹配Unable to create output file ''xxx'' ----------------无法建立输出文件xxxUnable to open include file ''xxx'' ---------------无法打开被包含的文件xxxUnable to open input file ''xxx'' ----------------无法打开输入文件xxxUndefined label ''xxx'' -------------------没有定义的标号xxxUndefined structure ''xxx'' -----------------没有定义的结构xxxUndefined symbol ''xxx'' -----------------没有定义的符号xxxUnexpected end of file in comment started on line xxx ----------从xxx行开始的注解尚未结束文件不能结束Unexpected end of file in conditional started on line xxx ----从xxx 开始的条件语句尚未结束文件不能结束Unknown assemble instruction ----------------未知的汇编结构Unknown option ---------------未知的操作Unknown preprocessor directive: ''xxx'' -----------------不认识的预处理命令xxxUnreachable code ------------------无路可达的代码Unterminated string or character constant -----------------字符串缺少引号User break ----------------用户强行中断了程序Void functions may not return a value ----------------- Void类型的函数不应有返回值Wrong number of arguments -----------------调用函数的参数数目错''xxx'' not an argument ----------------- xxx不是参数''xxx'' not part of structure -------------------- xxx不是结构体的一部分xxx statement missing ( -------------------- xxx语句缺少左括号xxx statement missing ) ------------------ xxx语句缺少右括号xxx statement missing ; -------------------- xxx缺少分号xxx'' declared but never used -------------------说明了xxx但没有使用xxx'' is assigned a value which is never used ----------------------给xxx赋了值但未用过Zero length structure ------------------结构体的长度为零。

C++常见的编译错‎误中英对应翻‎译对于刚学编程‎，刚接触C++的新手来说，编译运行报错‎是最头疼的一‎件事，爆出一堆英文‎，英语差一点的‎又不知道什么‎意思，所以也不知道‎如何去改，在此，我给大家传一‎份常见错误中‎英文对照表及‎简单解释，希望可以帮到‎大家：fatal error C1003: error count exceed‎s number‎; stoppi‎n g compil‎a tion中文对照：（编译错误）错误太多，停止编译分析：修改之前的错‎误，再次编译fatal error C1004: unexpe‎c ted end of file found中文对照：（编译错误）文件未结束分析：一个函数或者‎一个结构定义‎缺少“}”、或者在一个函‎数调用或表达‎式中括号没有‎配对出现、或者注释符“/*…*/”不完整等fatal error C1083: Cannot‎open includ‎e file: 'xxx': No such file or direct‎o ry中文对照：（编译错误）无法打开头文‎件x xx：没有这个文件‎或路径分析：头文件不存在‎、或者头文件拼‎写错误、或者文件为只‎读fatal error C1903: unable‎to recove‎r from previo‎u s error(s); stoppi‎n g compil‎a tion中文对照：（编译错误）无法从之前的‎错误中恢复，停止编译分析：引起错误的原‎因很多，建议先修改之‎前的错误error C2001: newlin‎e in consta‎n t中文对照：（编译错误）常量中创建新‎行分析：字符串常量多‎行书写error C2006: #includ‎e expect‎e d a filena‎m e, found 'identi‎f ier'中文对照：（编译错误）#includ‎e命令中需要‎文件名分析：一般是头文件‎未用一对双引‎号或尖括号括‎起来，例如“#includ‎e stdio.h”error C2007: #define‎syntax‎中文对照：（编译错误）#define‎语法错误分析：例如“#define‎”后缺少宏名，例如“#define‎”error C2008: 'xxx' : unexpe‎c ted in macro defini‎t ion中文对照：（编译错误）宏定义时出现‎了意外的xx‎x分析：宏定义时宏名‎与替换串之间‎应有空格，例如“#define‎TRUE"1"”error C2009: reuse of macro formal‎'identi‎f ier'中文对照：（编译错误）带参宏的形式‎参数重复使用‎分析：宏定义如有参‎数不能重名，例如“#define‎s(a,a) (a*a)”中参数a重复‎error C2010: 'charac‎t er' : unexpe‎c ted in macro formal‎parame‎t er list中文对照：（编译错误）带参宏的形式‎参数表中出现‎未知字符分析：例如“#define‎s(r|) r*r”中参数多了一‎个字符‘|’error C2014: prepro‎c essor‎comman‎d must start as first nonwhi‎t e space中文对照：（编译错误）预处理命令前‎面只允许空格‎分析：每一条预处理‎命令都应独占‎一行，不应出现其他‎非空格字符error C2015: too many charac‎t ers in consta‎n t中文对照：（编译错误）常量中包含多‎个字符分析：字符型常量的‎单引号中只能‎有一个字符，或是以“\”开始的一个转‎义字符，例如“char error = 'error';”error C2017: illega‎l escape‎sequen‎c e中文对照：（编译错误）转义字符非法‎分析：一般是转义字‎符位于' ' 或" " 之外，例如“char error = ' '\n;”error C2018: unknow‎n charac‎t er '0xhh'中文对照：（编译错误）未知的字符0‎x hh分析：一般是输入了‎中文标点符号‎，例如“char error = 'E'；”中“；”为中文标点符‎号error C2019: expect‎e d prepro‎c essor‎direct‎i ve, found 'charac‎t er'中文对照：（编译错误）期待预处理命‎令，但有无效字符‎分析：一般是预处理‎命令的#号后误输入其‎他无效字符，例如“#!define‎TRUE 1”error C2021: expect‎e d expone‎n t value, not 'charac‎t er'中文对照：（编译错误）期待指数值，不能是字符分析：一般是浮点数‎的指数表示形‎式有误，例如123.456Eerror C2039: 'identi‎f ier1' : is not a member‎of 'identi‎f ier2'中文对照：（编译错误）标识符1不是‎标识符2的成‎员分析：程序错误地调‎用或引用结构‎体、共用体、类的成员error C2041: illega‎l digit 'x' for base 'n'中文对照：（编译错误）对于n进制来‎说数字x非法‎分析：一般是八进制‎或十六进制数‎表示错误，例如“int i = 081;”语句中数字‘8’不是八进制的‎基数error C2048: more than one defaul‎t中文对照：（编译错误）defaul‎t语句多于一‎个分析：switch‎语句中只能有‎一个defa‎u l t，删去多余的d‎e fault‎error C2050: switch‎expres‎s ion not integr‎a l中文对照：（编译错误）switch‎表达式不是整‎型的分析：switch‎表达式必须是‎整型（或字符型），例如“switch‎("a")”中表达式为字‎符串，这是非法的error C2051: case expres‎s ion not consta‎n t中文对照：（编译错误）case表达‎式不是常量分析：case表达‎式应为常量表‎达式，例如“case "a"”中“"a"”为字符串，这是非法的error C2052: 'type' : illega‎l type for case expres‎s ion中文对照：（编译错误）case表达‎式类型非法分析：case表达‎式必须是一个‎整型常量（包括字符型）error C2057: expect‎e d consta‎n t expres‎s ion中文对照：（编译错误）期待常量表达‎式分析：一般是定义数‎组时数组长度‎为变量，例如“int n=10; int a[n];”中n为变量，这是非法的error C2058: consta‎n t expres‎s ion is not integr‎a l中文对照：（编译错误）常量表达式不‎是整数分析：一般是定义数‎组时数组长度‎不是整型常量‎error C2059: syntax‎error : 'xxx'中文对照：（编译错误）‘xxx’语法错误分析：引起错误的原‎因很多，可能多加或少‎加了符号xx‎xerror C2064: term does not evalua‎t e to a functi‎o n中文对照：（编译错误）无法识别函数‎语言分析：1、函数参数有误‎，表达式可能不‎正确，例如“sqrt(s(s-a)(s-b)(s-c));”中表达式不正‎确2、变量与函数重‎名或该标识符‎不是函数，例如“int i,j; j=i();”中i不是函数‎error C2065: 'xxx' : undecl‎a red identi‎f ier中文对照：（编译错误）未定义的标识‎符x xx分析：1、如果xxx为‎c o ut、cin、scanf、printf‎、sqrt等，则程序中包含‎头文件有误2、未定义变量、数组、函数原型等，注意拼写错误‎或区分大小写‎。

C语言的错误大全及中文解释1: Ambiguous operators need parentheses —不明确的运算需要用括号括起2: Ambiguous symbol xxx —不明确的符号3: Argument list syntax error —参数表语法错误4: Array bounds missing —丢失数组界限符5: Array size toolarge—数组尺寸太大6: Bad character in paramenters—参数中有不适当的字符7: Bad file name format in include directive —包含命令中文件名格式不正确8: Bad ifdef directive synatax—编译预处理ifdef有语法错9: Bad undef directive syntax —编译预处理undef有语法错10: Bit field too large —位字段太长11: Call of non-function —调用未定义的函数12: Call to function with no prototype —调用函数时没有函数的说明13: Cannot modify a const object —不允许修改常量对象14: Case outside of switch —漏掉了case 语句15: Case syntax error —Case 语法错误16: Code has no effect —代码不可能执行到17: Compound statement missing{ —分程序漏掉"{"18: Conflicting type modifiers —不明确的类型说明符19: Constant expression required —要求常量表达式20: Constant out of range in comparison —在比较中常量超出范围21: Conversion may lose significant digits —转换时会丢失意义的数字22: Conversion of near pointer not allowed —不允许转换近指针23: Could not find file xxx —找不到XXX文件24: Declaration missing ; —说明缺少"；"25: Declaration syntax error —说明中出现语法错误26: Default outside of switch —Default 出现在switch语句之外27: Define directive needs an identifier —定义编译预处理需要标识符28: Division by zero —用零作除数29: Do statement must have while —Do-while语句中缺少while部分30: Enum syntax error —枚举类型语法错误31: Enumeration constant syntax error —枚举常数语法错误32: Error directive :xxx —错误的编译预处理命令33: Error writing output file —写输出文件错误34: Expression syntax error —表达式语法错误35: Extra parameter in call —调用时出现多余错误36: File name too long —文件名太长37: Function call missing ) —函数调用缺少右括号38: Fuction definition out of place —函数定义位置错误39: Fuction should return a value —函数必需返回一个值40: Goto statement missing label —Goto语句没有标号41: Hexadecimal or octal constant too large —16进制或8进制常数太大42: Illegal character x —非法字符x43: Illegal initialization —非法的初始化44: Illegal octal digit —非法的8进制数字A45: Illegal pointer subtraction —非法的指针相减46: Illegal structure operation —非法的结构体操作47: Illegal use of floating point —非法的浮点运算48: Illegal use of pointer —指针使用非法49: Improper use of a typedefsymbol—类型定义符号使用不恰当50: In-line assembly not allowed —不允许使用行间汇编51: Incompatible storage class —存储类别不相容52: Incompatible type conversion —不相容的类型转换53: Incorrect number format —错误的数据格式54: Incorrect use of default —Default使用不当55: Invalid indirection —无效的间接运算56: Invalid pointer addition —指针相加无效57: Irreducible expression tree —无法执行的表达式运算58: Lvalue required —需要逻辑值0或非0值59: Macro argument syntax error —宏参数语法错误60: Macro expansion too long —宏的扩展以后太长61: Mismatched number of parameters in definition —定义中参数个数不匹配62: Misplaced break —此处不应出现break语句63: Misplaced continue —此处不应出现continue语句64: Misplaced decimal point —此处不应出现小数点65: Misplaced elif directive —不应编译预处理elif66: Misplaced else —此处不应出现else67: Misplaced else directive —此处不应出现编译预处理else68: Misplaced endif directive —此处不应出现编译预处理endif69: Must be addressable —必须是可以编址的70: Must take address of memory location —必须存储定位的地址71: No declaration for function xxx —没有函数xxx的说明72: No stack —缺少堆栈73: No type information —没有类型信息74: Non-portable pointer assignment —不可移动的指针（地址常数）赋值75: Non-portable pointer comparison —不可移动的指针（地址常数）比较76: Non-portable pointer conversion —不可移动的指针（地址常数）转换77: Not a valid expression format type —不合法的表达式格式78: Not an allowed type —不允许使用的类型79: Numeric constant too large —数值常太大80: Out of memory —内存不够用81: Parameter xxx is never used —能数xxx没有用到82: Pointer required on left side of ->—符号->的左边必须是指针83: Possible use of xxx before definition —在定义之前就使用了xxx（警告）84: Possibly incorrect assignment —赋值可能不正确85: Redeclaration of xxx —重复定义了xxx86: Redefinition of xxx is not identical —xxx的两次定义不一致87: Register allocation failure —寄存器定址失败88: Repeat count needs an lvalue—重复计数需要逻辑值89: Size of structure or array not known —结构体或数给大小不确定90: Statement missing ; —语句后缺少"；"91: Structure or union syntax error —结构体或联合体语法错误92: Structure size too large —结构体尺寸太大93: Sub scripting missing ] —下标缺少右方括号94: Superfluous & with function or array —函数或数组中有多余的"&"95: Suspicious pointer conversion —可疑的指针转换96: Symbol limit exceeded —符号超限97: Too few parameters in call —函数调用时的实参少于函数的参数不98: Too many default cases —Default太多(switch语句中一个)99: Too many error or warning messages —错误或警告信息太多100: Too many type in declaration —说明中类型太多101: Too much auto memory in function —函数用到的局部存储太多102: Too much global data defined in file —文件中全局数据太多103: Two consecutive dots —两个连续的句点104: Type mismatch in parameter xxx —参数xxx类型不匹配105: Type mismatch in redeclaration of xxx —xxx重定义的类型不匹配106: Unable to create output file xxx —无法建立输出文件xxx107: Unable to open include file xxx —无法打开被包含的文件xxx108: Unable to open input file xxx —无法打开输入文件xxx109: Undefined label xxx —没有定义的标号xxx110: Undefined structure xxx —没有定义的结构xxx111: Undefined symbol xxx —没有定义的符号xxx112: Unexpected end of file in comment started on line xxx —从xxx行开始的注解尚未结束文件不能结束113: Unexpected end of file in conditional started on line xxx —从xxx 开始的条件语句尚未结束文件不能结束114: Unknown assemble instruction —未知的汇编结构115: Unknown option —未知的操作116: Unknown preprocessor directive: xxx —不认识的预处理命令xxx117: Unreachable code —无路可达的代码118: Unterminated string or character constant —字符串缺少引号119: User break —用户强行中断了程序120: Void functions may not return a value —Void类型的函数不应有返回值121: Wrong number of arguments —调用函数的参数数目错122: xxx not an argument —xxx不是参数123: xxx not part of structure —xxx不是结构体的一部分124: xxx statement missing ( —xxx语句缺少左括号125: xxx statement missing ) —xxx语句缺少右括号126: xxx statement missing ; —xxx缺少分号127: xxx declared but never used —说明了xxx但没有使用128: xxx is assigned a value which is never used —给xxx赋了值但未用过。

常见错误中英文对照表
分析：例如“i+j;”语句，“+”运算无意义 warning C4553: '==' : operator has no effect; did you intend '='? 中文对照：“==”运算符无效；是否为“=”？分析：例如
“i==j;” 语句，“==”运算无意义 warning C4700: local variable 'xxx' used without having been initialized 中文对照：变量 xxx 在使用前未初始化分析：变量未赋值，结果有可能不正确，如果变量通过 scanf 函数赋值，则有可能漏写“&”运算符，或变量通过 cin 赋值，语句有误
warning C4715: 'xxx' : not all control paths return a value 中文对照：函数 xx 不是所有控制路径都有返回值函数分析：一般是在函数的 if 语句中包含 return 语句，当 if 语句的条件不成立时没有返回值 warning C4723: potential divide by 0 中文对照：有可能被 0 除分析：表达式值为 0 时不能作为除数。

常见错误中英文对照表中文对照：未知的字符Oxhh分析：一般是输入了中文标点符号，例如“ char error = 'E' ；中“；”为中文标点符号error C2019: expected preprocessor directive, found 'character'中文对照：期待预处理命令，但有无效字符分析：一般是预处理命令的#号后误输入其他无效字符，例如“ #!define TRUE 1 ”error C2021: expected exp onent value, no t 'character'中文对照：期待指数值，不能是字符分析：一般是浮点数的指数表示形式有误，例如123.456Eerror C2039: 'ide ntifier1' : is not a member of 'ide nifier2'中文对照：标识符1不是标识符的成员分析：程序错误地调用或引用结构体、共用体、类的成员error C2048: more tha n one default中文对照：default语句多于一个分析：switch语句中只能有一个default，删去多余的defaulterror C2050: switch expressi on not in tegral中文对照：switch表达式不是整型的分析：switch表达式必须是整型(或字符型)，例如“ switch ("a") ”中表达式为字符串，这是非法的error C2051: case expressi on not con sta nt中文对照：case表达式不是常量分析：case表达式应为常量表达式，例如“ case "a" ”中“ "a" ”为字符串，这是非法的error C2052: 'type' : illegal type for case expressi on中文对照：case表达式类型非法分析：case表达式必须是一个整型常量(包括字符型)error C2057: expected con sta nt expressi on中文对照：期待常量表达式分析：一般是定义数组时数组长度为变量，例如“int n=10; int a[n]; ”中n为变量，是非法的error C2058: con sta nt expressi on is not in tegral中文对照：常量表达式不是整数分析：一般是定义数组时数组长度不是整型常量error C2059: syn tax error : 'xxx'中文对照：‘ xxx '语法错误分析：引起错误的原因很多，可能多加或少加了符号xxxerror C2064: term does not evaluate to a fun cti on中文对照：无法识别函数语言分析：1、函数参数有误，表达式可能不正确，例如“sqrt(s(s-a)(s-b)(s-c)); ”中表达式不正确2 、变量与函数重名或该标识符不是函数，例如“ int i,j; j=i(); ”中i不是函数error C2065: 'xxx' : un declared ide ntifier中文对照：未定义的标识符xxx分析：1、如果xxx为cout、cin、scanf、printf、sqrt等，则程序中包含头文件有误2、未定义变量、数组、函数原型等，注意拼写错误或区分大小写。

C语言中常见得错误汉语解释Ambiguous operators need parentheses 不明确的运算需要用括号括起Ambiguous symbol 'xxx'不明确的符号Argument list syntax error参数表语法错误Array bounds missing丢失数组界限符Array size toolarge数组尺寸太大Bad character in paramenters参数中有不适当的字符Bad file name format in include directive 包含命令中文件名格式不正确Bad ifdef directive synatax编译预处理ifdef有语法错Bad undef directive syntax编译预处理undef有语法错Bit field too large位字段太长Call of non-function调用未定义的函数Call to function with no prototype调用函数时没有函数的说明Cannot modify a const object不允许修改常量对象Case outside of switch漏掉了case 语句Case syntax errorCase 语法错误Code has no effect代码不可述不可能执行到Compound statement missing{分程序漏掉"{"Conflicting type modifiers不明确的类型说明符Constant expression required要求常量表达式Constant out of range in comparison在比较中常量超出范围Conversion may lose significant digits 转换时会丢失意义的数字Conversion of near pointer not allowed不允许转换近指针Could not find file 'xxx'找不到XXX文件Declaration missing ;说明缺少"；"Declaration syntax error说明中出现语法错误Default outside of switchDefault 出现在switch语句之外Define directive needs an identifier定义编译预处理需要标识符Division by zero用零作除数Do statement must have whileDo-while语句中缺少while部分Enum syntax error枚举类型语法错误Enumeration constant syntax error枚举常数语法错误Error directive :xxx错误的编译预处理命令Error writing output file写输出文件错误Expression syntax error表达式语法错误Extra parameter in call调用时出现多余错误File name too long文件名太长Function call missing )函数调用缺少右括号Fuction definition out of place函数定义位置错误Fuction should return a value函数必需返回一个值Goto statement missing labelGoto语句没有标号Hexadecimal or octal constant too large 16进制或8进制常数太大Illegal character 'x'非法字符xIllegal initialization非法的初始化Illegal octal digit非法的8进制数字Illegal pointer subtraction非法的指针相减Illegal structure operation非法的结构体操作Illegal use of floating point非法的浮点运算Illegal use of pointer指针使用非法Improper use of a typedefsymbol类型定义符号使用不恰当In-line assembly not allowed不允许使用行间汇编Incompatible storage class存储类别不相容Incompatible type conversion不相容的类型转换Incorrect number format错误的数据格式Incorrect use of defaultDefault使用不当Invalid indirection无效的间接运算Invalid pointer addition指针相加无效Irreducible expression tree无法执行的表达式运算Lvalue required需要逻辑值0或非0值Macro argument syntax error宏参数语法错误Macro expansion too long宏的扩展以后太长Mismatched number of parameters in definition 定义中参数个数不匹配Misplaced break此处不应出现break语句Misplaced continue此处不应出现continue语句Misplaced decimal point此处不应出现小数点Misplaced elif directive不应编译预处理elifMisplaced else此处不应出现elseMisplaced else directive此处不应出现编译预处理else Misplaced endif directive此处不应出现编译预处理endif Must be addressable必须是可以编址的Must take address of memory location 必须存储定位的地址No declaration for function 'xxx'没有函数xxx的说明No stack缺少堆栈No type information没有类型信息Non-portable pointer assignment不可移动的指针（地址常数）赋值Non-portable pointer comparison不可移动的指针（地址常数）比较Non-portable pointer conversion不可移动的指针（地址常数）转换Not a valid expression format type不合法的表达式格式Not an allowed type不允许使用的类型Numeric constant too large数值常太大Out of memory内存不够用Parameter 'xxx' is never used能数xxx没有用到Pointer required on left side of ->符号->的左边必须是指针Possible use of 'xxx' before definition 在定义之前就使用了xxx（警告）Possibly incorrect assignment赋值可能不正确Redeclaration of 'xxx'重复定义了xxxRedefinition of 'xxx' is not identical xxx的两次定义不一致Register allocation failure寄存器定址失败Repeat count needs an lvalue重复计数需要逻辑值Size of structure or array not known结构体或数给大小不确定Statement missing ;语句后缺少"；"Structure or union syntax error结构体或联合体语法错误Structure size too large结构体尺寸太大Sub scripting missing ]下标缺少右方括号Superfluous with function or array函数或数组中有多余的"" Suspicious pointer conversion可疑的指针转换Symbol limit exceeded符号超限Too few parameters in call函数调用时的实参少于函数的参数不Too many default casesDefault太多(switch语句中一个) Too many error or warning messages 错误或警告信息太多Too many type in declaration说明中类型太多Too much auto memory in function函数用到的局部存储太多Too much global data defined in file文件中全局数据太多Two consecutive dots两个连续的句点Type mismatch in parameter xxx参数xxx类型不匹配Type mismatch in redeclaration of 'xxx' xxx重定义的类型不匹配Unable to create output file 'xxx'无法建立输出文件xxxUnable to open include file 'xxx'无法打开被包含的文件xxxUnable to open input file 'xxx'无法打开输入文件xxxUndefined label 'xxx'没有定义的标号xxxUndefined structure 'xxx'没有定义的结构xxxUndefined symbol 'xxx'没有定义的符号xxxUnexpected end of file in comment started on line xxx从xxx行开始的注解尚未结束文件不能结束Unexpected end of file in conditional started on line xxx从xxx 开始的条件语句尚未结束文件不能结束Unknown assemble instruction未知的汇编结构Unknown option未知的操作Unknown preprocessor directive: 'xxx'不认识的预处理命令xxxUnreachable code无路可达的代码Unterminated string or character constant字符串缺少引号User break用户强行中断了程序V oid functions may not return a valueV oid类型的函数不应有返回值Wrong number of arguments调用函数的参数数目错'xxx' not an argumentxxx不是参数'xxx' not part of structurexxx不是结构体的一部分xxx statement missing (xxx语句缺少左括号xxx statement missing )xxx语句缺少右括号xxx statement missing ;xxx缺少分号xxx' declared but never used说明了xxx但没有使用xxx' is assigned a value which is never used给xxx赋了值但未用过Zero length structure结构体的长度为零本文来源碧海潮声大学生网/thread-26029-1-1.html。

c 语言中的英文错误翻译PART (1)1."c" not an argument in function sum 该标识符不是函数的参数2.array bounds missing ] in function main 缺少数组界限符"]"3.Array size too large in function main 数组规模太大4.bad file name format in include directive 在包含指令中的文件名格式不正确.5.Call of non-function in function main 调用未经过定义的函数.6.cannot modify a const object in function main 对常量不能进行修改.7.character constant too long in function main 字符常量太大8.constant expression required in funtion main 数组定义的时候,数组大小要求是常数pound statment missing } in function main 复合语句漏掉符号"{"10.declaration syntax error in function main 宣告语法错误11.expression syntax in function main 表达式语法错误12. extra parameter in call to sum in function 调用函数时使用了过多的参数13.illegal use of floating point in function main 浮点数的不合法使用14.illegal pionter subtraction in function main 不合法的指针相减15.invalid pointer addition in function main 无效的指针相加16.out of memory in function main 内存不足17.statement missing ; in function main 语句后面漏掉分号.PART (2)1."k" is assigned a value which is never used 定义了一个变量,但程序从来没用过2.possibiy incorrect assignment in function main 这样的赋值可能不正确3. suspicious pointer conversion in function main 可疑的指针转换4.code has no effect in funtion main 代码对程序没效果Ambiguous operators need parentheses:不明确的运算需要用括号括起Ambiguous symbol 'xxx' :不明确的符号Argument list syntax error:参数表语法错误Array bounds missing :丢失数组界限符Array size toolarge :数组尺寸太大Bad character in paramenters :参数中有不适当的字符Bad file name format in include directive :包含命令中文件名格式不正确Bad ifdef directive synatax :编译预处理ifdef有语法错Bad undef directive syntax :编译预处理undef有语法错Bit field too large :位字段太长Call of non-function :调用未定义的函数Call to function with no prototype :调用函数时没有函数的说明Cannot modify a const object :不允许修改常量对象Case outside of switch :漏掉了case 语句Case syntax error :Case 语法错误Code has no effect :代码不可述不可能执行到Compound statement missing{ :分程序漏掉"{"Conflicting type modifiers :不明确的类型说明符Constant expression required :要求常量表达式Constant out of range in comparison :在比较中常量超出范围Conversion may lose significant digits :转换时会丢失意义的数字Conversion of near pointer not allowed :不允许转换近指针Could not find file 'xxx' :找不到XXX文件Declaration missing ; :说明缺少"；"Declaration syntax error :说明中出现语法错误Default outside of switch :Default 出现在switch语句之外Define directive needs an identifier :定义编译预处理需要标识符Division by zero :用零作除数Do statement must have while :Do-while语句中缺少while部分Enum syntax error :枚举类型语法错误Enumeration constant syntax error :枚举常数语法错误Error directive :xxx :错误的编译预处理命令Error writing output file :写输出文件错误Expression syntax error :表达式语法错误Extra parameter in call :调用时出现多余错误File name too long :文件名太长Function call missing ) :函数调用缺少右括号Fuction definition out of place :函数定义位置错误Fuction should return a value :函数必需返回一个值Goto statement missing label :Goto语句没有标号Hexadecimal or octal constant too large :16进制或8进制常数太大Illegal character 'x' :非法字符xIllegal initialization :非法的初始化Illegal octal digit :非法的8进制数字Illegal pointer subtraction :非法的指针相减Illegal structure operation :非法的结构体操作Illegal use of floating point :非法的浮点运算Illegal use of pointer :指针使用非法Improper use of a typedefsymbol :类型定义符号使用不恰当In-line assembly not allowed :不允许使用行间汇编Incompatible storage class :存储类别不相容Incompatible type conversion :不相容的类型转换Incorrect number format :错误的数据格式Incorrect use of defaultDefault使用不当Invalid indirection 无效的间接运算Invalid pointer addition 指针相加无效Irreducible expression tree 无法执行的表达式运算Lvalue required 需要逻辑值0或非0值Macro argument syntax error 宏参数语法错误Macro expansion too long 宏的扩展以后太长Mismatched number of parameters in definition 定义中参数个数不匹配Misplaced break 此处不应出现break语句Misplaced continue 此处不应出现continue语句Misplaced decimal point 此处不应出现小数点Misplaced elif directive 不应编译预处理elifMisplaced else 此处不应出现elseMisplaced else directive 此处不应出现编译预处理elseMisplaced endif directive 此处不应出现编译预处理endifMust be addressable 必须是可以编址的Must take address of memory location 必须存储定位的地址No declaration for function 'xxx' 没有函数xxx的说明No stack 缺少堆栈No type information 没有类型信息Non-portable pointer assignment 不可移动的指针（地址常数）赋值Non-portable pointer comparison 不可移动的指针（地址常数）比较Non-portable pointer conversion 不可移动的指针（地址常数）转换Not a valid expression format type 不合法的表达式格式Not an allowed type 不允许使用的类型Numeric constant too large 数值常太大Out of memory 内存不够用Parameter 'xxx' is never used 能数xxx没有用到Pointer required on left side of -> 符号->的左边必须是指针Possible use of 'xxx' before definition 在定义之前就使用了xxx（警告）Possibly incorrect assignment 赋值可能不正确Redeclaration of 'xxx' 重复定义了xxxRedefinition of 'xxx' is not identical xx的两次定义不一致Register allocation failure 寄存器定址失败Repeat count needs an lvalue 重复计数需要逻辑值Size of structure or array not known 结构体或数给大小不确定Statement missing ; 语句后缺少"；"Structure or union syntax error X构体或联合体语法错误Structure size too large 结构体尺寸太大Sub scripting missing ] 下标缺少右方括号Superfluous & with function or array 函数或数组中有多余的"&" Suspicious pointer conversion 可疑的指针转换Symbol limit exceeded 符号超限Too few parameters in call 函数调用时的实参少于函数的参数不Too many default cases Default太多(switch语句中一个)Too many error or warning messages 错误或警告信息太多Too many type in declaration 说明中类型太多Too much auto memory in function 函数用到的局部存储太多Too much global data defined in file 文件中全局数据太多Two consecutive dots 两个连续的句点Type mismatch in parameter xxx 数xxx类型不匹配Type mismatch in redeclaration of 'xxx' xx重定义的类型不匹配Unable to create output file 'xxx' 无法建立输出文件xxxUnable to open include file 'xxx' 无法打开被包含的文件xxxUnable to open input file 'xxx' 无法打开输入文件xxxUndefined label 'xxx' 没有定义的标号xxxUndefined structure 'xxx' 没有定义的结构xxxUndefined symbol 'xxx' 没有定义的符号xxxUnexpected end of file in comment started on line xxx 从xxx行开始的注解尚未结束文件不能结束Unexpected end of file in conditional started on line xxx 从xxx 开始的条件语句尚未结束文件不能结束Unknown assemble instruction 未知的汇编结构Unknown option 未知的操作Unknown preprocessor directive: 'xxx' 不认识的预处理命令xxxUnreachable code 无路可达的代码Unterminated string or character constant 字符串缺少引号User break 用户强行中断了程序Void functions may not return a value Void类型的函数不应有返回值Wrong number of arguments 调用函数的参数数目错'xxx' not an argument xxx不是参数'xxx' not part of structure xxx不是结构体的一部分xxx statement missing ( xx语句缺少左括号xxx statement missing ) xxx语句缺少右括号xxx statement missing ; xxx缺少分号xxx' declared but never used 说明了xxx但没有使用xxx' is assigned a value which is never used 给xxx赋了值但未用过Zero length structure 结构体的长度为零。

I．Compiling ——compile 编译II．fatal error ——重大错误III．Error executing ——执行错误IV．syntax error ——语法错误1．Expression syntax error ——表达式语法错误2．Declaration syntax error ——声明中出现语法错误3．Compound statement missing{ ——复合语句漏掉"{" 4．Illegal character ``x`` ——非法字符x5．undeclared identifier ——未定义的标识符6．redeclaration of ``xxx`` ——重复定义了xxx7．Declaration missing ; ——声明缺少"；"8．Cannot open include file: 'iostram.h': No such file or directory ——打不开包含文件'iostram.h'：没有这个文件或者路径错误9．Could not find file ``xxx`` ——找不到XXX文件10．missing ';' before identifier 'cout'——在标识符'cout' 之前缺少';' 11．unexpected end of file found ——找不到文件结束12．unresolved external symbol _main ——缺少主函数main 13．missing ')' before '{' ——在'{' 之前缺少')'14．Call to function with no prototype ——调用函数时没有声明函数15．Call of non-function ——调用未定义的函数16．Function should return a value ——函数必需返回一个值17．Type mismatch in parameter xxx ——参数xxx类型不匹配18．Do statement must have while ——Do-while语句中缺少while 部分19．Argument list syntax error ——参数表语法错误20．Division by zero ——用零作除数21．Array size toolarge ——数组尺寸太大22．Case outside of switch ——漏掉了case 语句23．Misplaced break ——此处不应出现break语句24．Code has no effect ——代码执行不到25．Constant expression required ——要求常量表达式26．Constant out of range in comparison ——在比较中常量超出范围27．writing output file ——写输出文件错误28．Unable to create output file ``xxx`` ——无法建立输出文件xxx 29．Illegal initialization ——非法的初始化30．Illegal use of floating point ——非法的浮点运算31．Illegal use of pointer ——指针使用非法32．Incompatible type conversion ——不相容的类型转换33．Lvalue required ——需要逻辑值0或非0值34．Macro argument syntax error ——宏参数语法错误35．Mismatched number of parameters in definition ——定义中参数个数不匹配36．Bad character in paramenters ——参数中有不适当的字符37．Bad file name format in include directive ——包含命令中文件名格式不正确38．Conversion may lose significant digits ——转换时会丢失意义的数字39．Out of memory ——内存不够用40．Parameter ``xxx`` is never used ——参数xxx没有用到41．``xxx`` is assigned a value which is never used ——xxx定义了但没有使用42．Possible use of ``xxx`` before definition ——在定义之前就使用了xxx（警告）43．Possibly incorrect assignment ——赋值可能不正确44.Ambiguous operators need parentheses -----------不明确的运算需要用括号括起45.Ambiguous symbol ''xxx'' ----------------不明确的符号46.Argument list syntax error ----------------参数表语法错误47.Array bounds missing ------------------丢失数组界限符48.Array size toolarge -----------------数组尺寸太大49.Bad character in paramenters ------------------参数中有不适当的字符50.Bad file name format in include directive --------------------包含命令中文件名格式不正确51.Bad ifdef directive synatax ------------------------------编译预处理ifdef有语法错52.Bad undef directive syntax ---------------------------编译预处理undef有语法错53.Bit field too large ----------------位字段太长54.Call of non-function -----------------调用未定义的函数55.Call to function with no prototype ---------------调用函数时没有函数的说明56.Cannot modify a const object ---------------不允许修改常量对象57.Case outside of switch ----------------漏掉了case 语句58.Case syntax error ------------------ Case 语法错误59.Code has no effect -----------------代码不可述不可能执行到pound statement missing{ --------------------分程序漏掉"{"61.Conflicting type modifiers ------------------不明确的类型说明符62.Constant expression required ----------------要求常量表达式63.Constant out of range in comparison -----------------在比较中常量超出范围64.Conversion may lose significant digits -----------------转换时会丢失意义的数字65.Conversion of near pointer not allowed -----------------不允许转换近指针66.Could not find file ''xxx'' -----------------------找不到XXX文件67.Declaration missing ; ----------------说明缺少"；"68.Declaration syntax error -----------------说明中出现语法错误69.Default outside of switch ------------------ Default 出现在switch语句之外70.Define directive needs an identifier ------------------定义编译预处理需要标识符71.Division by zero ------------------用零作除数72.Do statement must have while ------------------ Do-while语句中缺少while部分73.Enum syntax error ---------------------枚举类型语法错误74.Enumeration constant syntax error -----------------枚举常数语法错误75.Error directive :xxx ------------------------错误的编译预处理命令76.Error writing output file ---------------------写输出文件错误77.Expression syntax error -----------------------表达式语法错误78.Extra parameter in call ------------------------调用时出现多余错误79.File name too long ----------------文件名太长80.Function call missing -----------------函数调用缺少右括号81.Fuction definition out of place ------------------函数定义位置错误82.Fuction should return a value ------------------函数必需返回一个值83.Goto statement missing label ------------------ Goto语句没有标号84.Hexadecimal or octal constant too large ------------------16进制或8进制常数太大85.Illegal character ''x'' ------------------非法字符x86.Illegal initialization ------------------非法的初始化87.Illegal octal digit ------------------非法的8进制数字88.Illegal pointer subtraction ------------------非法的指针相减89.Illegal structure operation ------------------非法的结构体操作90.Illegal use of floating point -----------------非法的浮点运算91.Illegal use of pointer --------------------指针使用非法92.Improper use of a typedefsymbol ----------------类型定义符号使用不恰当93.In-line assembly not allowed -----------------不允许使用行间汇编94.Incompatible storage class -----------------存储类别不相容95.Incompatible type conversion --------------------不相容的类型转换96.Incorrect number format -----------------------错误的数据格式97.Incorrect use of default --------------------- Default使用不当98.Invalid indirection ---------------------无效的间接运算99.Invalid pointer addition ------------------指针相加无效100.Irreducible expression tree -------------------无法执行的表达式运算101.Lvalue required ---------------------------需要逻辑值0或非0值102.Macro argument syntax error -------------------宏参数语法错误103.Macro expansion too long ----------------------宏的扩展以后太长104.Mismatched number of parameters in definition ---------------------定义中参数个数不匹配105.Misplaced break ---------------------此处不应出现break语句106.Misplaced continue ------------------------此处不应出现continue语句107.Misplaced decimal point --------------------此处不应出现小数点108.Misplaced elif directive --------------------不应编译预处理elif109.Misplaced else ----------------------此处不应出现else110.Misplaced else directive ---------------此处不应出现编译预处理else 111.Misplaced endif directive -------------------此处不应出现编译预处理endif112.Must be addressable ----------------------必须是可以编址的113.Must take address of memory location ------------------必须存储定位的地址114.No declaration for function ''xxx'' -------------------没有函数xxx的说明115.No stack ---------------缺少堆栈116.No type information ------------------没有类型信息117.Non-portable pointer assignment --------------------不可移动的指针（地址常数）赋值118.Non-portable pointer comparison --------------------不可移动的指针（地址常数）比较119.Non-portable pointer conversion ----------------------不可移动的指针（地址常数）转换120.Not a valid expression format type ---------------------不合法的表达式格式121.Not an allowed type ---------------------不允许使用的类型122.Numeric constant too large -------------------数值常太大123.Out of memory -------------------内存不够用124.Parameter ''xxx'' is never used ------------------能数xxx没有用到125.Pointer required on left side of -> -----------------------符号->的左边必须是指针126.Possible use of ''xxx'' before definition -------------------在定义之前就使用了xxx（警告）127.Possibly incorrect assignment ----------------赋值可能不正确128.Redeclaration of ''xxx'' -------------------重复定义了xxx129.Redefinition of ''xxx'' is not identical ------------------- xxx的两次定义不一致130.Register allocation failure ------------------寄存器定址失败131.Repeat count needs an lvalue ------------------重复计数需要逻辑值132.Size of structure or array not known ------------------结构体或数给大小不确定133.Statement missing ; ------------------语句后缺少"；"134.Structure or union syntax error ------------结构体或联合体语法错误135.Structure size too large ----------------结构体尺寸太大136.Sub scripting missing ] ----------------下标缺少右方括号137.Superfluous & with function or array ------------------函数或数组中有多余的"&"138.Suspicious pointer conversion ---------------------可疑的指针转换139.Symbol limit exceeded ---------------符号超限140.Too few parameters in call -----------------函数调用时的实参少于函数的参数不141.Too many default cases --------------- Default太多(switch语句中一个) 142.Too many error or warning messages --------------------错误或警告信息太多143.Too many type in declaration -----------------说明中类型太多144.Too much auto memory in function -------函数用到的局部存储太多145.Too much global data defined in file -------------文件中全局数据太多146.Two consecutive dots -----------------两个连续的句点147.Type mismatch in parameter xxx ----------------参数xxx类型不匹配148.Type mismatch in redeclaration of ''xxx''----xxx重定义的类型不匹配149.Unable to create output file ''xxx'' ---------------无法建立输出文件xxx 150.Unable to open include file ''xxx'' ---------无法打开被包含的文件xxx 151.Unable to open input file ''xxx'' ----------------无法打开输入文件xxx 152.Undefined label ''xxx'' -------------------没有定义的标号xxx153.Undefined structure ''xxx'' -----------------没有定义的结构xxx154.Undefined symbol ''xxx'' -----------------没有定义的符号xxx155.Unexpected end of file in comment started on line xxx ----------从xxx 行开始的注解尚未结束文件不能结束156.Unexpected end of file in conditional started on line xxx ----从xxx 开始的条件语句尚未结束文件不能结束157.Unknown assemble instruction ----------------未知的汇编结构158.Unknown option ---------------未知的操作159.Unknown preprocessor directive: ''xxx'' -----------------不认识的预处理命令xxx160.Unreachable code ------------------无路可达的代码161.Unterminated string or character constant -----------字符串缺少引号er break ----------------用户强行中断了程序163.Void functions may not return a value ----------------- Void类型的函数不应有返回值164.Wrong number of arguments -----------------调用函数的参数数目错165.''xxx'' not an argument ----------------- xxx不是参数166.''xxx'' not part of structure -------------------- xxx不是结构体的一部分167.xxx statement missing ( -------------------- xxx语句缺少左括号168.xxx statement missing ) ------------------ xxx语句缺少右括号169.xxx statement missing ; -------------------- xxx缺少分号170.xxx'' declared but never used -------------------说明了xxx但没有使用171.xxx'' is assigned a value which is never used ----------------------给xxx 赋了值但未用过172.Zero length structure ------------------结构体的长度为零。

C语言中常见得错误汉语解释Ambiguous operators need parentheses 不明确的运算需要用括号括起Ambiguous symbol 'xxx'不明确的符号Argument list syntax error参数表语法错误Array bounds missing丢失数组界限符Array size toolarge数组尺寸太大Bad character in paramenters参数中有不适当的字符Bad file name format in include directive 包含命令中文件名格式不正确Bad ifdef directive synatax编译预处理ifdef有语法错Bad undef directive syntax编译预处理undef有语法错Bit field too large 位字段太长Call of non-function调用未定义的函数Call to function with no prototype调用函数时没有函数的说明Cannot modify a const object不允许修改常量对象Case outside of switch漏掉了case 语句Case syntax errorCase 语法错误Code has no effect代码不可述不可能执行到Compound statement missing{分程序漏掉"{"Conflicting type modifiers不明确的类型说明符Constant expression required要求常量表达式Constant out of range in comparison在比较中常量超出范围Conversion may lose significant digits转换时会丢失意义的数字Conversion of near pointer not allowed 不允许转换近指针Could not find file 'xxx'找不到XXX文件Declaration missing ;说明缺少"；"Declaration syntax error说明中出现语法错误Default outside of switchDefault 出现在switch语句之外Define directive needs an identifier定义编译预处理需要标识符Division by zero用零作除数Do statement must have whileDo-while语句中缺少while部分Enum syntax error枚举类型语法错误Enumeration constant syntax error枚举常数语法错误Error directive :xxx错误的编译预处理命令Error writing output file写输出文件错误Expression syntax error表达式语法错误Extra parameter in call调用时出现多余错误File name too long文件名太长Function call missing )函数调用缺少右括号Fuction definition out of place函数定义位置错误Fuction should return a value函数必需返回一个值Goto statement missing labelGoto语句没有标号Hexadecimal or octal constant too large 16进制或8进制常数太大Illegal character 'x' 非法字符x Illegal initialization非法的初始化Illegal octal digit非法的8进制数字Illegal pointer subtraction非法的指针相减Illegal structure operation非法的结构体操作Illegal use of floating point非法的浮点运算Illegal use of pointer指针使用非法Improper use of a typedefsymbol类型定义符号使用不恰当In-line assembly not allowed不允许使用行间汇编Incompatible storage class存储类别不相容Incompatible type conversion不相容的类型转换Incorrect number format错误的数据格式Incorrect use of defaultDefault使用不当Invalid indirection无效的间接运算Invalid pointer addition指针相加无效Irreducible expression tree无法执行的表达式运算Lvalue required需要逻辑值0或非0值Macro argument syntax error宏参数语法错误Macro expansion too long宏的扩展以后太长Mismatched number of parameters in definition定义中参数个数不匹配Misplaced break此处不应出现break语句Misplaced continue此处不应出现continue语句Misplaced decimal point此处不应出现小数点Misplaced elif directive不应编译预处理elifMisplaced else此处不应出现elseMisplaced else directive此处不应出现编译预处理else Misplaced endif directive此处不应出现编译预处理endifMust be addressable必须是可以编址的Must take address of memory location 必须存储定位的地址No declaration for function 'xxx'没有函数xxx的说明No stack 缺少堆栈No type information没有类型信息Non-portable pointer assignment不可移动的指针（地址常数）赋值Non-portable pointer comparison不可移动的指针（地址常数）比较Non-portable pointer conversion不可移动的指针（地址常数）转换Not a valid expression format type不合法的表达式格式Not an allowed type不允许使用的类型Numeric constant too large数值常太大Out of memory 内存不够用Parameter 'xxx' is never used能数xxx没有用到Pointer required on left side of ->符号->的左边必须是指针Possible use of 'xxx' before definition 在定义之前就使用了xxx（警告）Possibly incorrect assignment赋值可能不正确Redeclaration of 'xxx'重复定义了xxxRedefinition of 'xxx' is not identical xxx的两次定义不一致Register allocation failure寄存器定址失败Repeat count needs an lvalue重复计数需要逻辑值Size of structure or array not known结构体或数给大小不确定Statement missing ;语句后缺少"；"Structure or union syntax error结构体或联合体语法错误Structure size too large结构体尺寸太大Sub scripting missing ]下标缺少右方括号Superfluous & with function or array 函数或数组中有多余的"&" Suspicious pointer conversion可疑的指针转换Symbol limit exceeded符号超限Too few parameters in call函数调用时的实参少于函数的参数不Too many default casesDefault太多(switch语句中一个)Too many error or warning messages 错误或警告信息太多Too many type in declaration说明中类型太多Too much auto memory in function函数用到的局部存储太多Too much global data defined in file文件中全局数据太多Two consecutive dots两个连续的句点Type mismatch in parameter xxx参数xxx类型不匹配Type mismatch in redeclaration of 'xxx' xxx重定义的类型不匹配Unable to create output file 'xxx'无法建立输出文件xxxUnable to open include file 'xxx'无法打开被包含的文件xxxUnable to open input file 'xxx'无法打开输入文件xxxUndefined label 'xxx'没有定义的标号xxx Undefined structure 'xxx'没有定义的结构xxxUndefined symbol 'xxx'没有定义的符号xxxUnexpected end of file in comment started on line xxx从xxx行开始的注解尚未结束文件不能结束Unexpected end of file in conditional started on line xxx从xxx 开始的条件语句尚未结束文件不能结束Unknown assemble instruction未知的汇编结构Unknown option未知的操作Unknown preprocessor directive: 'xxx'不认识的预处理命令xxxUnreachable code无路可达的代码Unterminated string or character constant 字符串缺少引号User break用户强行中断了程序Void functions may not return a valueVoid类型的函数不应有返回值Wrong number of arguments调用函数的参数数目错'xxx' not an argumentxxx不是参数'xxx' not part of structurexxx不是结构体的一部分xxx statement missing (xxx语句缺少左括号xxx statement missing )xxx语句缺少右括号xxx statement missing ;xxx缺少分号xxx' declared but never used说明了xxx但没有使用xxx' is assigned a value which is never used 给xxx赋了值但未用过Zero length structure结构体的长度为零。