触控玻璃规格 IR46-85_SPEC

Light Vision ™11356-00000-10Clear AF Lens, Grey Frame,Dual LED LightsSolus ™ 1000S1101SGAFClear Scotchgard ™ AF Lens,Blue/Black Frame S1102SGAFGrey Scotchgard ™ AF Lens,Blue/Black Frame S1103SGAFAmber Scotchgard ™ AF Lens,Blue/Black Frame S1107SGAF Indoor/Outdoor Grey Scotchgard ™ AF LensBlue/Black Frame S1101SGAF-KTClear Scotchgard ™ AF Lens,Blue/Black Frame, Foam Gasket and StrapS1102SGAF-KTGrey Scotchgard ™ AF Lens,Blue/Black Frame, Foam Gasket and StrapS1107SGAF-KTIndoor/Outdoor Grey Scotchgard ™AF Lens, Blue/Black Frame, Foam Gasket and StrapS1201SGAFClear Scotchgard ™ AF Lens,Green/Black FrameS1202SGAFGrey Scotchgard ™ AF Lens,Green/Black FrameS1203SGAFAmber Scotchgard ™ AF Lens,Green/Black FrameS1207SGAF Indoor/Outdoor Grey Scotchgard ™ AF LensGreen/Black Frame S1201SGAF-KTClear Scotchgard ™ AF Lens,Green/Black Frame, Foam Gasket and StrapS1202SGAF-KTGrey Scotchgard ™ AF Lens,Green/Black Frame, Foam Gasket and Strap S1201SGAF-SKTClear Scotchgard ™ AF Lens, Green/Black Frame, Foam Gasket and Strap (temples not included)S1202SGAF-SKTGrey Scotchgard ™ AF Lens, Green/Black Frame, Foam Gasket and Strap (temples not included)S1207SGAF-SKTIndoor/Outdoor Grey Scotchgard ™ AF Lens, Green/Black Frame, Foam Gasketand Strap (temples not included)Solus-foamSolus Accessories Foam GasketSolus-strapSolus Accessories StrapSmart Lens ™13407-00000-5Photochromic Lens, Black FramePREMIUM PROTECTIVE EYEWEARThese eye or face protection products help provide limited eye and face protection. Misuse or failure to follow warning and instruction may result in serious potential injury, including blindness or death. For proper use, selection, and applications against flying particles, optical radiation and/or splash, see supervisor, read User Instructions and warning on the package or call 3M PSD Technical Service in the USA at 1-800-243-4630. In Canada, call 1-800-267-4414.WARNING!3Personal Safety Division 3M CenterBuilding 235-2W-70St. Paul, MN 55144-1000For more information:In U.S.Technical Assistance 1-800-243-4630 Customer Care Center 1-800-328-1667/WorkerSafety In CanadaTechnical Assistance 1-800-267-4414 Customer Care 1-800-364-35773M.ca/Safety3M PSD products are occupational use only.3M and all other trademarks used herein are trademarks of 3M Company, used under license in Canada. Please recycle. Printed in U.S.A. © 3M 2018. All rights reserved. 70-0715-6919-1Rev. 01/201811476-00000-10Clear AF Lens, Grey Frame,Dual LED LightsLight Vision ™ 2Fuel ™11640-00000-10Red Mirror Lens, Metallic Sand Frame11641-00000-20Blue Mirror Lens, Silver Frame11664-00000-10Blue HC Mirror Lens, White Frame11650-0000-10Red Mirror Lens, Metallic Sand Frame11654-00000-10Grey AF Lens, Black Rubberized FrameSecureFit ™ 600Safety SunwearSS1330AS-GYellow Mirror AS Lens, Grey FrameSS1428AS-SBlue Mirror AS Lens, Silver Alum FrameSS1502AF-BGrey AF Lens, Black Frame w/GasketSS1502AF-WGrey AF Lens, White Frame w/GasketSS1514AS-SSilver Mirror AS Lens, Silver Black Frame w/GasketSS1511AF-BGrey Polarize AF Lens, Black Frame w/GasketSS1514AS-BSilver Mirror AS Lens, Black/Grey Frame w/GasketSS1629AS-BRed Mirror AS Lens, Black FrameSF601SGAFClear Scotchgard ™ AF LensSF601SGAF-FMClear Scotchgard ™ AF Lens, Foam GasketSF602SGAFGrey Scotchgard ™ AF LensSF602SGAF-FMGrey Scotchgard ™ AF Lens, Foam GasketSF603SGAFAmber Scotchgard ™ AF LensSF607SGAFIndoor/Outdoor Grey Scotchgard ™ AF LensSF601RASClear Rugged Anti-Scratch LensSF602RASGrey Rugged Anti-Scratch LensSF617ASLow IR R1.7, AS LensSF630ASShade W3.0, AS LensSF650AS W5, AS Lens SF611ASPolarized, AS LensSF613ASPhotochromic, AS LensLight Vision ™ OTG11489-00000-10Clear AF Lens, Dual LED Lights, OTG16617-00000-10Clear Lens, Black Frame w/Strap, Medium16618-00000-10Clear Lens, Black Frame w/Strap, LargeLexa ™Dust GoggleGear™Lexa ™ Splash GoggleGear ™16644-00000-10 Clear Lens, Medium, D3 D416645-00000-10 Clear Lens, Large, D3 D416400-00000-10Clear Lens, Elastic Strap, Medium16408-00000-10Clear Lens, Black Adjustable Temple,Medium16412-00000-10Clear Lens, Elastic Strap, Large16420-00000-10Clear Lens, Black Adjustable Temple,LargeFectoggles ™40300-00000-10Clear Lens, Impact Goggle40301-00000-10Clear AF Lens, Impact Goggle40304-00000-10Clear Lens, Splash Goggle, D3 D440305-00000-10Clear AF Lens, Splash Goggle, D3 D4Centurion ™Maxim ™ 2x2 Goggle40686-00000-10Clear Lens, Black Frame w/Strap, Temples40687-00000-10Grey Lens, Black Frame w/Strap, Temples40696-00000-10Clear Lens, Black Frame, Side Venting40698-00000Clear AF Lens, Black Strap, Air Flow Goggle40699-00000Grey AF Lens, Black Strap, Air Flow Goggle332 Impact Goggle40650-00000-10Clear Lens 40651-00000-10 Clear AF Lens334 Splash Goggle40660-00000-10 Clear Lens, D3 D440661-00000-10 Clear AF Lens, D3 D4GoggleGear ™ 500GG501SGAFClear Scotchgard ™ AF Lens, D3 D4,Cloth Strap GG501NSGAFClear Scotchgard ™ AF Lens, D3 D4,Neoprene Strap GG500-PI Prescription InsertGG500-NeoStrapReplacementNeoprene Strap GG500-ClthStrap Replacement Cloth StrapSAFETY GOGGLESACCESSORIESMaxim ™ Splash GoggleModul-R ™40671-00000-10Clear AF Lens, O-T-G, D3 D440658-00000-10Clear AF Lens, Chin ProtectorThe Complete Line of Protective Eyewear Products11215-00000-20 Grey AF Lens, Black Frame11216-00000-20I/O Mirror Lens, Black FrameMoon Dawg ™11532-10000-20Clear AF Lens, Blue Frame11554-00000-20Clear AF Lens, Bronze Frame11555-00000-20Bronze AF Lens, Bronze Frame11556-00000-20Blue Mirror HC Lens, Bronze FrameMetaliks ™ GTHIE6 Protective EyewearAttaches directly to 3M ™ Hard Hat SuspensionHIE601AF - Clear AF Lens HIE602AF - Amber AF Lens HIE603AF - Grey AF Lens3M ™ Protective Eyewear Slip-On Side Shields23451-00030-20 ClearReplacement Foam GasketSF-FOAM (SF400)SF600FI (SF600)GoggleGear ™ 2890 SeriesGG2891-SGAFClear Scotchgard ™ AF Lens,Indirect Vent3M ™ Lens Cleaner83803-00000Lens Cleaning Fluid 83745-00000Lens Cleaning T owelettesQX Privo 12261-00000-20Clear AF Lens, Black/Orange Frame12262-00000-20Grey AF Lens, Black/Orange Frame12263-00000-20Amber AF Lens, Black/Orange Frame12264-00000-20I/O Mirror Lens, Black/Orange Frame12265-00000-20Clear AF Lens, Silver/Red Frame12266-00000-20SF401SGAF-REDClear Scotchgard Anti-Fog LensRed/Gray Frame SF401SGAF-BLUClear Scotchgard Anti-Fog LensBlue/Gray Frame SF401SGAF-BLU-FClear Scotchgard Anti-Fog Lens with FoamGasket, Blue/Gray Frame SF402SGAF-BLU12100-10000-20 Clear Lens, Black Temple12101-10000-20Grey Lens, Black Temple 12109-10000-20Clear Lens, Black Temple, Soft Nose12110-10000-20Grey Lens, Black Temple, Soft Nose12115-10000-20Clear Lens, Black Sport Grip Temple, Soft Nose12180-10000-2011380-00000-20 Clear AF Lens, Silver Frame11381-00000-20Grey AF Lens, Silver Frame11471-00000-20Clear AF Lens, Blue Frame11472-00000-20I/O Mirror Lens, Blue Frame11523-00000-20Light Blue AF Lens, Blue Frame11477-00000-10Clear AF Lens, Grey Frame, +1.5 Diopter11478-00000-10Clear AF Lens, Grey Frame, +2.0 Diopter11479-00000-10Clear AF Lens, Grey Frame, +2.5 Diopter11374-00000-20Clear Lens, Silver Frame, +1.5 Diopter11375-00000-20Clear Lens, Silver Frame, +2.0 Diopter11376-00000-20Clear Lens, Silver Frame, +2.5 Diopter11377-00000-20Grey Lens, Silver Frame, +1.5 Diopter11378-00000-2011457-00000-10Clear AF Lens, Silver Frame, Dual +1.5 Diopter11458-00000-10Clear AF Lens, Silver Frame, Dual +2.0 Diopter11459-00000-10Clear AF Lens, Silver Frame, Dual +2.5 DiopterBX ReadersMetaliks Sport11343-10000-20Clear AF Lens, Brushed Nickel Frame11344-10000-20Grey AF Lens, Brushed Nickel Frame11345-10000-20I/O Mirror HC Lens, Brushed Nickel Frame11540-10000-20Blue Mirror HC Lens, Brushed Nickel FrameLexa ™15100-00000-20Clear AF Lens, Black Temple, Large15200-00000-20Clear AF Lens, Black Temple, Medium15154-00000-100Clear AF Lens, Black Temple, Large15204-00000-20Grey AF Lens, Black Temple, Medium15152-00000-100Clear AF Lens, Black Temple, Medium14246-00000-20Clear AF Lens, Metallic Grey/Black Frame14247-00000-20Grey AF Lens, Metallic Grey/Black Frame14248-00000-20 I/O Mirror Lens, Metallic Grey/Black FrameSF401AF Clear AF Lens SF402AF Grey AF Lens SF410ASIndoor/Outdoor Mirror LensSF401AF-FM Clear AF Lens, Foam SF402AF-FM Grey AF Lens, Foam SF410AS-FMSecureFit 400OX。

mt4720工控触摸瓶技术参数摘要：一、MT4720工控触摸屏概述1.屏幕尺寸与分辨率2.显示比例与亮度3.对比度、响应时间与视角二、触摸技术及操作系统的配置1.触摸技术类型2.触摸点数与操作系统的支持三、接口与电源配置1.接口类型与数量2.电源参数与功耗四、环境适应性与尺寸重量1.工作温度与存储温度2.湿度适应性3.尺寸与重量正文：一、MT4720工控触摸屏概述MT4720工控触摸屏是一款拥有47英寸大屏幕的工控设备，其分辨率达到1920x1080，呈现16:9的显示比例。

屏幕亮度为500cd/㎡，对比度为1000:1，响应时间为5ms。

从不同角度观看，其视角可达178°。

这款触摸屏采用红外触摸技术，支持10点触摸操作。

此外，它还兼容Windows和Android操作系统，方便用户根据需求进行选择。

二、触摸技术及操作系统的配置MT4720工控触摸屏采用红外触摸技术，可以实现高速、精确的触摸操作。

屏幕支持10点触摸，让用户在操作过程中更加便捷。

在操作系统方面，MT4720支持Windows和Android两种操作系统，满足不同用户的需求。

三、接口与电源配置MT4720工控触摸屏提供了丰富的接口配置，包括HDMI、VGA和USB 等，方便用户连接各种外部设备。

在电源方面，这款触摸屏采用AC 100-240V，50/60Hz的电源输入，功耗为≤200W。

四、环境适应性与尺寸重量MT4720工控触摸屏具有良好的环境适应性，可以在0-40℃的工作温度下正常运行，存储温度范围为-20-60℃。

此外，设备可以在10%-90%RH的湿度环境中正常工作，无冷凝现象。

触摸屏规格承认书Analog Touch panel Specification 品名/Product Name：电容式触摸屏模组机种名/Product Number：HKCZ-21.5CTP-023客户名称/ CUSTOMER NAME：客户确认/CUSTOMER APPROVE：日期/APPROVE DATE:客户签核核准审核确认承制方签核核准审核确认目录目录 (2)适用范围 (3)变更记录 (3)1.产品规格 (5)1.1 产品尺寸 (5)1.2 产品结构 (5)1.3 产品参数 (5)1.4 产品功耗 (6)1.5 产品使用、保存环境 (6)2.可靠性标准规范 (6)3.结构图纸 (7)6.注意事项 (8)深圳华科创智技术有限公司 2 / 8适用范围本规格书为明确规范本公司产品触控面板性能而订定，当本规格书与其它个别规格书内容有抵触情况发生时，仍以本规格书标准为最优先。

本规格书内容如有项目不足或内容需变更时，须经由会议讨论后另订之。

This specification defines performance of input surfaces for our transparent analog touch panels. In the event of a conflict between this specification and applicable individual specification, this specification takes precedence. Items missing from this specification are to be decided subject to discussion.变更记录日期版本描述变更人员2016.6.25 V1.0 初版吴小雄1.产品规格1.1 产品尺寸项目内容单位触摸尺寸21.5 inch视窗比例16:9 NA外形尺寸514.64*310.51 mmSensor外形489.57*289.08 mm可视区476.64*268.11 mm1.2 产品结构项目内容单位玻璃厚度 3 mm玻璃倒角R4.0 mmOCA厚度（上线）0.125 mm纳米银导电膜厚度（上线）0.125 mmOCA厚度（下线）0.05 mm纳米银导电膜厚度（下线）0.125 mm1.3 产品参数项目内容单位表面硬度7H H透过率＞84% %线性度Pitch 6.0mm mm最大支持点数10点NA支持最大分辨率1920*1080Dots NA接口种类USB NA运行系统Android NA1.4 产品功耗项目内容单位振荡频率12 MHZ电源5V V反应时间≦10 ms1.5 产品使用、保存环境项目内容备注使用温度范围湿度20%-90%，非结雾单体状态下以上条件不代表环境试验规状态-10℃-60℃格保存温度范围湿度20%-90%，非结雾单体状态下以上条件不代表环境试验规状态-20℃-70℃格2.可靠性标准规范项目测试条件判定高温存储试验80℃，240h，试验后常温静置2h检查产品功能正常高温高湿试验60℃、90%RH，240h，试验后静置2h检产品功能正常查冷热冲击试验温度-30℃/+70℃，60分钟/循环，试验产品功能正常3.结构图纸6.注意事项1.汗水或油脂等若附着于纳米银线层上，将会影响纳米银线层表面阻抗质特性，故勿在未戴手套下直接触摸表面。

E28-2G4M27S产品规格书SX1280 2.4GHz 500mW SPI 高速LoRa模块目录第一章产品概述 (2)1.1 产品简介 (2)1.2 特点功能 (2)1.3 应用场景 (2)第二章规格参数 (3)2.1 极限参数 (3)2.2 工作参数 (3)第三章机械尺寸与引脚定义 (4)第四章基本操作 (5)4.1硬件设计 (5)4.2软件编写 (5)第五章基本应用 (6)5.1 基本电路 (6)第六章常见问题 (7)6.1 传输距离不理想 (7)6.2 模块易损坏 (7)6.3 误码率太高 (7)第七章焊接作业指导 (8)7.1 回流焊温度 (8)7.2 回流焊曲线图 (8)第八章相关型号 (9)第九章天线指南 (9)9.1 天线推荐 (9)9.2天线选择 (9)修订历史 (10)关于我们 (11)第一章产品概述1.1 产品简介E28-2G4M27S是亿佰特公司设计生产的2.4GHz射频收发模块，发射功率500mW，SPI接口，具有极低的低功耗模式流耗；该模块为小体积贴片型(引脚间距1.27mm)，自带高性能PCB板载天线，采用52MHz工业级高精度低温漂晶振，保证其工业特性和其稳定性能。

采用Semtech公司的SX1280射频芯片，此芯片包含多样的物理层以及多种调制方式，如LoRa、FLRC、GFSK，并可兼容蓝牙协议；特殊的调制和处理方式使得LoRa和FLRC调制的传输距离有显著提升，在原有基础上内置了功率放大器（PA）与低噪声放大器（LNA），使得最大发射功率达到500mW的同时接收灵敏度也获得进一步的提升，在整体的通信稳定性上较没有功率放大器与低噪声放大器的产品大幅度提升；出色的低功耗性能、片上DC-DC和Time-of-flight使得此芯片功功能强大，可用于智能家居、安全系统、定位追踪、无线测距、穿戴设备、智能手环与健康管理等等。

SX1280支持RSSI，用户可以根据需要实现深度的二次开发，亦集成飞行时间(Time of flight)，适用于测距功能。

SLA TE™10” Color Touch Screen Display R8001K1010INSTALLATION INSTRUCTIONSScan for more informationApplicationSLATE™ brings configurable safety and programmable logic together into one single platform. The platform can easilybe customized for almost any requirement or application–offering virtually limitless development opportunities with far less complexity.The R8001K1010 SLATE 10” Color Touch Screen Display provides users with the ability to create vivid application displays using web technology. The screen is web enabled and with the SLATE Web Editor tool creating screens is simple and easy.Features• Display screens are web pages served from SLATE Base Module• Integrated view of SLATE system• Standard Honeywell pages for Burner Control, Fuel Air Ratio, Limit and Base modulesSLATE™10” COLOR TOUCH SCREEN DISPLAY3 R8001K1010SpecificationsElectrical Ratings:Voltage and Frequency: 24 VAC, 50/60Hz; 24AC/DCEnvironmental RatingsAmbient Temperature:Operating: 32° F to 158° F (0° C to 70° C)Shipping: -40° F to 158° F (-40° C to 70° C)Humidity: 95% continuous, noncondensing.Dimensions: See Fig. 1.Weight: 4 lb 5 oz (1.5 Kg)Panel MountingThe display can be mounted through a cutout in the panel door, using four #4 thread-forming Plastite screws. See Fig. 3.For standard panel thicknesses of 0.060”–0.090” Honeywell recommends screw length of 3/8”. See Fig. 2 for hole spacing.Required ComponentsR8001A1001 SLATE Base ControllerPower Plug RecommendationsThe SLATE 10 inch color touch screen display will notcome with a power plug connector. The following are recommendations for the power connection. See Fig. 4 for plug locations.• 24VAC Wall Plug-in Transformer(Input Voltage: 120VAC, 60HZ – Output Voltage: 24VAC±5%). Honeywell p/n 32006131 or equivalent.• 18AWG wire• Plug-in connectors (or equivalent) NOT INCLUDED:–Phoenix - p/n 1757019–EBY Electro - p/n EB1508-02-500–Dinkle – p/n 2ESDV-02P–Molex – p/n 03953000024 32-00095—03SLATE ™ 10” COLOR TOUCH SCREEN DISPLAY 5R8001K1010Fig. 1.3/4Dimensions in in. (mm).Fig. 2. Mounting dimensions of color touch screen display in in. (mm).Fig. 3. Panel mounting of color touch screen display.Fig. 4. Touch screen display inputs.Note:SD card slot for future display firmware updates. Principal Technical FeaturesThe R8001K1010 color touch screen display provides a web-based user interface for viewing system status, and viewing, creating, or modifying configurations. Communications and NetworkingThe R8001K1010 color touch screen display interfaces directly with the SLATE system using a standard Ethernet connection, and can connect directly to the Base module or via an Ethernet switch.The R8001K1010 color touch screen display locates all base modules on an IP subnet using a subnet broadcast message, and once located allows users to select one to initiate a connection to that SLATE system.User Interface and TechnologyThe R8001K1010 color touch screen display is based on the Google Chrome™ browser and supports HTML5.A double tap on any web screen activates the Home, Back, and Help buttons, URL address bar, plus other controlsthat are normally hidden from view. Double tapping again deactivates these controls.6 32-00095—03InstallationWARNINGFire or Explosion Hazard Can cause severe injury,death, or property damage.Verification of safety requirements must be performedeach time a control is installed on a burner to preventpossible hazardous burner operation.When Installing This Product1. Read these instructions carefully. Failure to follow themcould damage the product or cause a hazardous condition.2. Check the ratings given in the instructions and on theproduct to make sure the product is suitable for yourapplication.WARNINGElectrical Shock Hazard.Can cause severe injury, death or equipment damage.1. Disconnect the power supply before beginning installationto prevent electrical shock and equipment damage. More than one power supply disconnect can be involved.2. Wiring must comply with all applicable codes, ordinancesand regulations.SLATE™10” COLOR TOUCH SCREEN DISPLAY7 R8001K1010Honeywell Process SolutionsHoneywell Thermal Solutions (HTS)1250 West Sam Houston ParkwaySouth Houston, TX 77042ThermalSolutions.honeywell ® U.S. Registered Trademark. © 2018 Honeywell International Inc. 32-00095—03 M.S. 05-18 Printed in U.S.A.For more information and detailed instructions on the SLATEdisplay please refer to the SLATE User Guide document located on our website at /SLATE32-00095-03IMPORTANT1. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with these instructions, may cause interference for radio communications. It has been tested and found to comply with the limits of a ClassA computing device of part 15 of FCC rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area may cause interference; in which case, the user, at their own expense, may be required to take whatever measures are required to correct this interference.2. This digital apparatus does not exceed the Class A limits for radio noise, set out in the Radio Interference Regulations of the Canadian Department of Communications.WARNINGElectrical Shock Hazard. Can cause severe injury, death or equipment damage.Disconnect the power supply from the main disconnectbefore beginning installation to prevent electrical shockand equipment damage. More than one disconnect can be required.。

CHIPHOMER TECHNOLOGY (SHANGHAI) LIMITEDCPT2610 数据手册单/双通道电容性触摸检测芯片September 2019目录CPT2610 数据手册 (1)目录 (2)图目录 (3)1概述 (4)2引脚 (5)2.1引脚排列 (5)2.2引脚说明 (6)3典型应用 (7)3.1双通道典型应用图 (7)3.2单通道典型应用图 (7)4功能描述 (8)4.1按键状态 (8)4.1.1按键输出有效电平选择 (8)4.1.2CPT2610SP8、CPT2610DN8 按键状态获取 (8)4.1.3CPT2610ST6、CPT2610DN6 按键状态获取 (8)4.2按键扫描模式 (8)4.3长时按键触发解除功能 (8)5电气特性 (9)6封装 (10)6.1SOP8L (10)6.2DFN2X2-8L (11)6.3SOT23-6L (12)6.4DFN1.6X1.6-6L (13)7订货信息 (14)8版本信息 (15)图目录图1CPT2610 SOP8L 引脚排列图 (5)图2CPT2610 SOT23-6L引脚排列图 (5)图3CPT2610 DFN1.6X1.6-6L引脚排列图 (5)图4CPT2610 DFN2X2-8L引脚排列图 (5)图5双通道触摸典型应用图 (7)图6单通道触摸典型应用图 (7)图7SOP8L封装尺寸图 (10)图8DFN2X2-8L封装尺寸图 (11)图9SOT23-6L封装尺寸图 (12)图10DFN1.6X1.6-6L封装尺寸图 (13)1 概述CPT2610是一款低功耗双通道/单通道电容检测芯片，具有高效的RF噪音抑制功能，能够准确识别手指触摸引起的微小电容变化，适用于用触摸按键替代机械按键等应用场合；具有实时的自校准和基线跟踪算法，能有效避免因环境因素变化而引起按键误触等情况；支持输出有效电平选择，以满足不同系统平台及应用的要求。

SE2-hAND SERIESThe SAFeasy TM light curtains, according to the Iec 61496-1 e Iec 61496-2 standards, are suitable for hand protection of operators exposed to risks.Different models with eleven standard heights ranging from 150 to 1650 mm, 35 mm resolution and an operating distance reaching 15 m are available. specific dip-switches, that can be reached through a slot present on the front of the receiver protected by a lid and opened with a simple screwdriver, guarantee rapid and safe device setting. the operator is thus able to configure, according to the specific needs, the manual or automatic restart, as well as the muting and partial muting functions. the emitter-receiver units are optically synchronised and contain all the control circuits, inputs and outputs inside the housing.The SAFeasy TM light curtains have also integrated the test function, automatically activated every second, without stopping the machine’s working cycle.a wide range of industrial applications, requiring operator safety, can be solved by the SAFeasy TM light curtains, thanks to the extremely compact dimensions (35x40 mm) and easy connection and installation.SAFeTY LIGHT CURTAINSHAND PROTeCTIONSAFeTYPower supply: 24 vdc ± 20% (seLv/PeLv)Consumption:70 ma max. / 2.1 w (emitter)100 ma max. / 3 w (receiver without load)Light emission: infrared Led 880 nmOptic diameter:Ø 16 mm Number of controlled beams:refer to table 1Optic interaxis: refer to table 2Resolution:refer to table 21st beam installation height: refer to table 3Through beam operating distance:0.5 ... 25 m (Q vers.)4 ... 50 m (P vers.)Receiver inputs:external switches for muting, test, restart andoverrideReceiver indicators:green / red safe / break Led2 yellow aLIgnment Ledsgreen Power on Led emitter indicators:yellow blinking faILure Led green Power on Led Output type: 2 PnP Output current:0.7 a max.0.25 a max. (45°c - 55°c)short-circuit signalling and protectionResponse time:14 msSelectable functions:total / partial muting manual / automatic restartrefer to table 4Time-out period:muting: 10 minutes override: 2 minutesMuting signalling lamp:24 v3 w min. (125 ma), 7 w max. (300 ma)Receiver connection: 8-pole m12 connector emitter connection:4-pole m12 connectorCable length: 50 m max. (with 50 nf capacitive load)Safety category:type 4electrical protection: class 1Mechanical protection: IP65IP67 (connector part)Housing material:aluminium with Pc makrolon plastic capsWeight:1.2 kg max. / m of total heightOperating temperature: -10 ... +55 °c Storage temperature:-25 ... +70 °cReference standards:en 954-1, Iec 61496-1, Iec 61496-2Table 4: DIP-SWITCh SELECTIONTable 1: NUMBER OF BEAMSTable 2: CONTROLLED hEIGhT (mm)Table 3: RESPONSE TIME (ms)GReY dip-switches: total / partial muting selection WHITedip-switches: manual / auto. restart selectionDIMeNSIONSRX: M12 8-POLE CONNECTORTX: M12 4-POLE CONNECTORversIons L 1 L 2 se2-35-015-PP-w 256147se2-35-030-PP-w 403294se2-35-045-PP-w 550441PL (ref. en Iso 13849-1)d cat (ref. en 954-1)2sIL (ref. en Iec 61508)2sIL cL (ref. en Iec 62061)2Pfhd – Probability of danger failure (1/h)1,37e-08t1 – Life time (years)20mttfd - mean time to danger failure (years)309dc – diagnostic coverage (%)96,3%sff – safe failure fraction (%)97,83%hft – hardware fault tolerancencthe company endeavours to continuously improve and renew its products; for this reason the technical data and contents of this catalogue may undergo variations without prior notice. for correct installation and use, the company can guarantee only the data indicated in the instruction manual supplied with the products.ACCeSSORY SeLeCTION AND ORDeR INFORMATIONPlease refer also to Safety Device Accessories。

haifeel touch参数
Haifeel Touch的参数主要包括触摸面板的尺寸、分辨率、抗指纹涂层、触摸技术、手势识别、响应速度等。

1.触摸面板尺寸：Haifeel Touch采用大尺寸液晶触摸面板，提供更广阔
的操作区域，方便用户进行各种操作。

2.分辨率：触摸面板分辨率为1920x1080像素，显示效果清晰细腻，能
够提供更好的视觉体验。

3.抗指纹涂层：为了减少指纹对显示效果的影响，Haifeel Touch采用了
抗指纹涂层技术，使屏幕保持清洁。

4.触摸技术：Haifeel Touch采用容量式触摸技术，可以实现高灵敏度、
高精度的触控操作。

同时支持多点触控，用户可以使用多个手指同时进行操作。

此外，还支持手写笔输入，用户可以使用触控笔进行书写、绘画等操作。

5.手势识别：Haifeel Touch可以识别滑动手势、缩放手势和旋转手势，
用户可以通过滑动、捏合或张开手指以及旋转手指来实现浏览、切换页面、放大或缩小屏幕上的内容等操作。

6.响应速度：Haifeel Touch具备快速响应的特点，触摸操作的延迟非常
低，能够实时反馈用户的操作。

同时具备高刷新率特性，能够流畅展示动态内容，提供更好的触控体验。

以上是Haifeel Touch的主要参数，具体参数可能会因产品型号和规格而有所不同。

V/V I S6000♦ La pantalla táctil de alta definición 800*480* muestra claramente los resultados y gráficos.♦ El sistema de análisis de datos de gran alcance con host de computadora interno puede realizar múltiples funciones independientemente, como establecer curvas de calibración, mediciones fotométricas y cuantitativas, escaneoespectral, cinéticas, método del coeficiente e impresión de datos.♦ El sistema óptico adopta un diseño de suspensión. Todas las partes ópticas se fijan independientemente en la base de aluminio de 8mm de espesor libre de deformaciones para evitar el impacto de la deformación del fondo y la externaEste diseño mejora en gran medida la estabilidad y confiabilidad del instrumento.♦ Práctica función de almacenamiento e impresión de datos. El UV-6000 puede conectar directamente en formato A4 loswww.dinko.es2Información para pedidosLámpara Ultravioleta Porta-cubetas 8 x 10mm motorizadoAccesoriosCubetasDistribuidor:Code Description6.6000.00 Espectrofotómetro UV/VIS 6000. Smart Pantalla Táctil. Ancho de banda 1,8nm 6.8000.01 Programa opcional para PC, para cumplir la normativa 21 CFR PART 11 6.6900.03 Lámpara Halógena 6.6900.08 Lámpara Deuterio Código Artículos6.3200.02 Porta Cubetas 4x10mm paso de luz 6.3200.03 Porta Cubetas 4x50mm paso de luz 6.3200.04 Porta Cubetas 4x100mm paso de luz6.3200.04 Porta Cubeta 1x10mm paso de luz para circulación de agua 6.6900.02 Porta Cubeta 8x10mm cambio manual 6.6900.01 Porta Cubeta 8x10mm cambio automático 6.3200.05 Porta Micro Cubetas ajustable 6.3200.06 Porta Films transparentes 6.3200.07 Porta Tubo hasta 25mm Ø 6.3200.08 Sistema Peltier 6.3200.09 Sistema Sipper6.3200.10 Sistema Peltier / Sipper 6.6900.07* Impresora para datosCódigo Artículos 6.3200.11 Cubeta vidrio con tapón 1,7ml, paso de luz 5 mm, 4 uds 6.6900.05 Cubeta vidrio con tapón 3,5ml, paso de luz 10 mm, 4 uds 6.3200.12 Cubeta vidrio con tapón 7ml, paso de luz 20 mm, 4 uds 6.3200.13 Cubeta vidrio con tapón 10,5ml, paso de luz 30mm, 4 uds 6.3200.15 Cubeta vidrio con tapón 17,5ml, paso de luz 50mm, 4 uds 6.3200.16 Cubeta vidrio con tapón 34ml, paso de luz 100mm, 4 uds 1.9363.00 Cubeta plástica con tapón 3,5ml, paso de luz 10mm, 100 uds 6.4000.01 Cubeta cuarzo con tapón 1,7ml paso de luz 5mm, 2 uds 6.6900.06 Cubeta cuarzo con tapón 3,5ml paso de luz 10mm, 2 uds 6.4000.02 Cubeta cuarzo con tapón 7ml paso de luz 20mm, 2 uds 6.4000.03 Cubeta cuarzo con tapón 10,5ml paso de luz 30mm, 2 uds 6.4000.05 Cubeta cuarzo con tapón 17,5ml paso de luz 50mm, 2 uds 6.4000.06 Cubeta cuarzo con tapón 34ml paso de luz 100mm, 2 uds 6.4000.07 Cubeta micro 12,5*12,5*45, 100µl, 2 uds 6.4000.08 Cubeta micro 12,5*12,5*45, 200µl, 2 uds 6.4000.10 Cubeta micro 12,5*12,5*45, 700µl, 2 uds。

S6200 SVR Surface Vertical Rod• ANSI/BHMA A156.3-2001 Grade 1 Compliant • CA Title 19 Compliant • Meets/Exceeds ADA requirements • UBC 97S6200-LBR SVRSPECTRA SERIES EXIT DEVICES61Rim mount exit device S62Surface verticalSPECIFY FUNCTION01Exit Only, No Trim02Dummy Pull or Lever (opens when dogged)03Entrance by trim when latch is released by key 08Lever with key locks/unlocks lever 14Lever trim always activeSPECIFY PANIC OR FIRE RATEDP Panic exit deviceMechanical Dogging STD; See part # CD for optional key cylinder dogging FFire exit deviceMechanical dogging not availableS6100 Rim MountSPECIFY OPTIONSRRequest-To-Exit Output, SPDT83.00For 62 Series devices only: LBRLess Bottom Rod, for Panic DevicesN/CSPECIFY FINISHU 630 Dull Stainless Steel6 pin, 1.125" mortise cylinder, keyed alike, dull chrome, 6-pin Rim Cylinder, Keyed Alike, Specially for 03 Function EK EclipseGK GalaxyEKE EclipseGKE GalaxySECURITY DOOR CONTROLS801 Avenida Acaso • Camarillo, CA 93012Email:***********************• Price List Effective February 1, 201740E x i t D e v i c e sSPECTRA SERIES EXIT DEVICELISTS63Mortise [03 Lever Trim included]1139.00SPECIFY FUNCTION01Exit Only, No TrimN/C 02Dummy Pull or Lever (opens when dogged)N/C 03Entrance by trim when latch is released by key N/C 08Lever with key locks/unlocks lever N/C 14Lever trim always activeN/CSPECIFY PANIC OR FIRE RATEDAdd to ListP Panic exit deviceMechanical Dogging STD; See part # CD for optional key cylinder dogging N/C FFire exit deviceMechanical dogging not available114.00SPECIFY HANDRRRight hand reverse bevel, RHRB LR Left hand reverse bevel, LHRBN/CSPECIFY FINISHAdd to ListU 630 Dull Stainless SteelN/CSPECIFY LENGTHAdd to List36For 36" Door N/C42For 42" Door 21.0048 For 48" Door 42.00SPECIFY OPTIONS Add to ListR Request-To-Exit Output, SPDT83.00LLatch Status Output, SPDT83.00SPECIFY TRIMEEEclipse Escutheon GE Galaxy Escutheon N/CS6300 MortiseEEGESPECTRA™ S6000 Touch Bar Exit Devices - MORTISEXKDistributor Discount CodeTRIM CYLINDER OPTIONS Add to ListCD Keyed dogging (Specify key cylinder separately)(not available with (F) fire exit device)21.00CYL-6KDQ 6 pin, 1.125" mortise cylinder, keyed different, dull chrome 32.00CYL-6KAQ6 pin, 1.125" mortise cylinder, keyed alike, dull chrome32.0041Exit DevicesSECURITY DOOR CONTROLS801 Avenida Acaso • Camarillo, CA 93012Email:***********************• Price List Effective February 1, 201742E x i t D e v i c e sExit Check ® - Delayed Egress All-In-One DeviceXKDistributor Discount CodeSPECIFY FUNCTION01Exit Only02Dummy03NightlatchN/CSPECIFY DEVICELISTS61Rim mount exit device621.00S62Surface Vertical - ROD GUARDS SUGGESTED 932.00S63Mortise [03 Lever Trim included] - specify:EE/GEEclipse Escutheon/Galaxy Escutheon1139.00S68Concealed Vertical1035.00SPECIFY PANIC OR FIRE RATEDAdd to ListPPanicN/CFFire114.00Rim MountSPECIFY HAND (Mortise Only)RRRight hand reverse bevel, RHRB LR Left hand reverse bevel, LHRBN/CU 630 Dull Stainless SteelN/CSPECIFY FINISHSPECIFY LENGTHAdd to List36For 36" Door (standard) N/C42For 42" Door 21.0048 For 48" Door 42.00The Exit Check ® All-In-One Device integrates our premium Spectra™ bar with SDCs innovative delayed egress electronics. When unauthorized egress is innitiated by depressing the push pad of the S6000-101, an audible alarm will sound and an ir-reversible delay period of 15 seconds will begin. After the delay period has expired, the device unlocks, permitting egress until the device is reset. In a life safety emergencty, the device will immediatly unlock upon loss of power or when powered by a fire control supervised power supply. Door contact included for anti tailgate and door prop.APPLICATION INCLUDE:• Restricting the egress of wandering patients for their own safety• Restricting the egress of commercial center patrons for security application needs• Controlling pedestrian traffic in transportation facilities, including airport jetways and tarmacs • Reducing shoplifting and employee theftSingle: 24VDC @ 540 mAPair: 24VDC @ 790 mAVertical Rod MortiseConcealed Vertical RodFWAXSPECIAL LOCKING ARRANGEMENTSEKGKPTH x 5 600 Series Power SupplyEKEGKEPT-3VCYL-6KDQCYL-6KAQ RIM-CYL-KAE x i t D e v i c e sExit Device - Delayed EgressSPECIFY DEVICEEEGEdependent exit delay and nuisance times. Keypad for violation reset, momentary bypass and on-off; Voice Annunciation and digital countdown display with door open indicator. Status and remote control inputs are standard Single: 24VDC @ 430 mA CYL-6KDQ CYL-6KAQDES For pair of doors, additional exit device equipped with delayed egress mechanism, lessDEC-J101-KDERim MountCYL-6KDQ CYL-6KAQ RIM-CYL-KAS E C U R I T Y D O O R C O N T R O L S801 A v e n i d a A c a s o • C a m a r i l l o , C A 93012E m a i l : S e r v i c e @s d c s e c u r i t y .c o m • w w w .s d c s e c u r i t y .c o mP r i c e L i s t E f f e c t i v e F e b r u a r y 1, 201745Exit Devices• LED (field selectable Active or Off) Bypass - No LED • Armed - Blinks every 4 seconds (Green when armed,Red when in alarm mode• Low Battery Alert – Siren will beep every 45 seconds.• 15 or 60 second arming delay • Remote status output• Field selectable alarm modes include:› Continuous alarm with manual key reset › Alarm automatically rearms 2 minutes after door closes and may be retriggered. May be manually rearmed by key before automatically rearmed.OptionsAR6 6 or 10 minute alarm with auto rearmand manual key reset. AR2020 minute alarm with auto rearmand manual key resetAD1 1 second arming delayExit Devices - Alarmed ExitXKDistributor Discount CodeSPECIFY EXIT ALARMA Exit Alarm, 9V Battery Powered414.00BExit Alarm with 12/24V AC/DC input (9V battery provides power backup)456.00Vertical RodSPECIFY FUNCTIONAdd to List01Exit Only03NightlatchN/CSPECIFY DEVICELISTS61Rim mount exit device 621.00S62Surface vertical932.00S63Mortise [03 Lever Trim included] - specify:EE/GEEclipse Escutheon/Galaxy Escutheon1139.00SPECIFY PANIC OR FIRE RATEDPPanicN/CFFire114.00Rim MountMortiseSPECIFY HAND (Mortise Only)RRRight hand reverse bevel, RHRB LR Left hand reverse bevel, LHRBN/CSPECIFY FINISHU 630 Dull Stainless SteelN/CSPECIFY LENGTH36For 36" Door N/C42For 42" Door 21.0048 For 48" Door 42.00SPECIFY TRIM (Mortise Only)EEEclipse EscutheonGEGalaxy EscutheonN/CSPECIFY POWER TRANSFER (For the entire line of Power Transfer, see page 88 and page 89)LISTPTM-2AL Two (2) Conductor Power Transfer Device: Two (2) 18 Ga. wires5 Amp @ 12/24V AC/DV, Aluminum Powder Coat, US28 equivalent 371.00PTH-4QFour (4) Conductor Power Transfer Hinge1 Amp @ 12/24V per pair, 4.5” x 4.5” standard weight, 626 Dull Chrome156.00SPECIFY POWER SUPPLY (For the entire line of Power Suplies, see page 90)LIST602RF1 Amp, class2 output, 12" W x 12" H x 3.75" D box 270.00631RF1.5 Amp, class 2 output, 12" W x 12" H x 3.75" D box363.00EEGEPTH x 5 Ft CablePTM Series600 Series Power Supply602RF (shown)TRIM OPTIONS Add to ListCYL-6KDQ 6 pin, 1.125" mortise cylinder, keyed different, dull chrome 32.00CYL-6KAQ6 pin, 1.125" mortise cylinder, keyed alike, dull chrome32.00RIM-CYL-KARim Cylinder for 03 Function, keyed alike - see page 39 for more info34.00Specify Trim for S61 and S62 - See page 35EE03 EclipseSee SDC powerSPECTRA SERIES EXIT DEVICE N03 Nova• Fire rated exit device• Failsafe, unlocks by access control, power loss or signal from fire command center•For use with fire rated exit and stairwell doors• All wiring maintained in the strike jamb • Complies with all national codes • No power transfer hingeSPECIFY DEVICES63Mortise [03 Lever Trim included] - specify:power loss or signal from fire command center releases failsafe device immediatly. Complies with national building and fire codesVoltage: EEGE600 Series Power Supply602RF (shown)TRIM OPTIONS Add to ListCYL-6KDQ CYL-6KAQE x i t D e v i c e soperation. When de-energized or signaled by a fire alarm, the pushpad and latch are released.Voltage: 12/24VDC @ 170/100 mAExit Device - Electric DoggingSPECIFY DEVICERim MountEEGEPTH x 5 Ft CablePTM Series600 Series Power Supply602RF (shown)CYL-6KDQCYL-6KAQ RIM-CYL-KASpecify Trim for S61c e L i s t E f f e c t i v e F e b r u a r y 1, 2017Momentary or maintained latch bolt and push pad retraction, with simultaneous dogging.Automatic re-triggering of latch retractionVoltage: 24VDC @ 700 mA activation, 200 mA continuousExit Device - Electric Latch Retraction/DoggingSPECIFY DEVICERim MountSPECIFY POWER TRANSFER EEGEPTH x 5 Ft CablePTM SeriesEME600 Series Power Supply602RF (shown)CYL-6KDQ CYL-6KAQ RIM-CYL-KASECURITY DOOR CONTROLS801 Avenida Acaso • Camarillo, CA 93012Email:***********************• Price List Effective February 1, 201750E x i t D e v i c e sRIM DEVICES STANDARD STRIKES SURFACE / Standard VERTICAL ROD DEVICES Strike REMOVABLE MULLION ListEXIT DEVICE STRIKESXKST1PStandard for S6100PST1MPFor 6100PST3FStandard for S6300FST1MFFor 6100FST3PStandard for S6300PST1FStandard for S6100FST2PStandard top strike for S6200PST28PStandard floor strike for S6200PST2FStandard top strike for S6200FST2DFOptional for pairs of doors with rim mount device.KR90FStandard KeyRemovable Mullion Less Key Cylinder For Panic Exit and Fire Exit Rim Mount Devices.Length: 8ftMaterial: 2" 11 Gauge Steel Tube Finish: Primer grayST28FStandard floor strike for S6200FOptional for mullion applicationFor use on 1-3/4” stan-dard or 2-1/4” thick single door , and 2-1/4” double door with overlapping astragal and coordinatorProjection: 13/16” (21mm)Projection: 13/16” (21mm)Projection: 29/32” (23mm)Projection: 1-1/8” (29mm)Projection: 1-15/16” (49mm)Mortise: 2-1/4” (57mm)Projection: 7/8” (22.5mm)Rim StrikesList Top StrikesList Bottom (Floor) Strikes ListOptional Mullion Strike ListOptional Threshold Strikes ListST28TOptional floor strike for using threshold openingsProjection: 3/8” (9.5mm)15.00673.0050.0071.00MORTISE STRIKE ListOPTIONAL DOUBLE DOOR STRIKE List Distributor Discount Code RIM-CYL-KA34.00Rim Cylinder, keyed alike - see page 39 for more infoOPTIONAL CYLINDER List。

玻璃微流控规格全文共四篇示例，供读者参考第一篇示例：玻璃微流控是利用微小尺寸的通道和微流体来控制和操纵微尺度和纳米尺度液体和颗粒。

相比传统的液体流动控制方法，玻璃微流控具有操作简便、快速、高效的特点，广泛应用于微生物学、生物医学、化学分析、生物传感技术等领域。

本文将介绍玻璃微流控的规格及其应用。

一、玻璃微流控的规格1. 尺寸：玻璃微流控的尺寸通常在微米或纳米级别，可以根据不同的实验需求设计不同尺寸的微通道和微结构。

常见的微流控芯片尺寸为10mm×10mm。

2. 材质：玻璃微流控主要采用高纯度玻璃作为材质，具有优良的光学透明性、化学稳定性和生物相容性，能够保证实验的准确性和稳定性。

3. 结构：玻璃微流控的结构设计多样，可以根据具体实验需求设计不同结构的微通道、微阀门、微泵等，实现流体的精准控制和操纵。

4. 制造工艺：玻璃微流控的制造工艺主要包括玻璃微加工技术、光刻技术、湿法腐蚀技术等，通过精密的加工和制造过程，可以实现微小尺寸的微通道和微结构的制作。

5. 连接接口：玻璃微流控芯片通常具有标准的连接接口，可以与各种流体传感器、流体控制设备、显微镜等设备进行连接，实现流体采样、分析和观察。

1. 生物医学领域：玻璃微流控广泛应用于细胞培养、细胞分析、细胞操纵等生物医学领域，可以实现细胞分选、培养、观察等功能，为生物医学研究提供有效工具。

2. 化学分析领域：玻璃微流控可用于微量药物测定、环境污染检测、食品检验等化学分析领域，可以实现高灵敏度、高分辨率的化学分析，为实验室研究和工业应用提供支持。

3. 微流体传感技术：玻璃微流控结合微流体传感技术，可以实现微小液滴的精确控制、微量物质的检测、微尺度颗粒的分选等功能，为传感器、生物传感器等领域提供创新解决方案。

4. 生物传感技术：玻璃微流控在生物传感技术领域具有广泛应用，可以实现生物分子的检测、分析和识别，为生物医学诊断、生物研究等领域带来新的可能性。

paxxx-0051 规格书一、产品介绍1.1 产品名称：paxxx-00511.2 产品型号：paxxx-00511.3 产品规格：paxxx-0051规格书1.4 产品特性：paxxx-0051具有高精度、高稳定性、高可靠性等特点，适用于各种工业领域的测量和控制应用。

二、技术参数2.1 输入电压：220VAC2.2 输出电压：0-10VDC2.3 额定功率：100W2.4 工作温度：-10℃~50℃2.5 存储温度：-20℃~80℃2.6 防护等级：IP652.7 频率响应：0-5kHz三、外观设计3.1 尺寸：150mm*100mm*50mm3.2 材质：铝合金外壳，表面喷涂处理3.3 连接方式：引出端子或连接头四、性能特点4.1 高精度：采用先进的传感器和信号处理技术，精度高达0.14.2 高稳定性：内部稳压电路设计，能够保持稳定的输出电压和电流4.3 高可靠性：采用优质元器件和严格的生产工艺，具有较高的抗干扰能力和可靠性4.4 多种输出方式：可根据用户要求提供不同的输出信号类型和方式4.5 兼容性强：适用于各种主流的自动化控制系统，易于集成和应用4.6 安装方便：标准尺寸和连接方式，可直接替换同类产品，安装简便快捷五、适用范围5.1 工业自动化控制系统5.2 电力电子设备5.3 仪器仪表设备5.4 机械设备5.5 工程施工项目5.6 新能源领域六、注意事项6.1 在使用过程中，请确保输入电压和负载匹配。

6.2 请注意防水防尘工作，避免外部环境对产品的影响。

6.3 请按照产品说明书正确安装和使用，以确保产品的正常性能和安全性。

6.4 如有疑问或需要技术支持，请及时与厂家通联。

七、售后服务7.1 本产品提供一年质保期，质保期内出现非人为因素造成的故障，可提供免费维修或更换。

7.2 质保期外的产品维修和配件更换，将收取相应的维修费用，具体费用标准请交流厂家。

7.3 如需技术支持或售后服务，请拨打掌柜交流或发送邮件至厂家指定电流新箱，我们将尽快为您解决问题。

安装说明书适用WEB 触摸屏型号：（1网1串：1个网口、1个RS485）型号： I7-1001一、 硬件参数型号 I7-1001显示器 7''TFT 触摸类型 电容式分辨率 1024*600 网口 1个100M/10M 工业网卡系统 LINUX 材质 ABS 塑料 处理器 4核1.2GHz串口 1个RS485内存 1GFlash 8G尺寸 186*120*40mm (L×W×H)安装尺寸 86*86*44mm (L×W×H)净重量 300g安装方式 86盒 电源 AC/DC 12-24V （建议用直流）功耗≤8W温度 -20～60℃(工作) --40～60℃(储运)湿度20％～90％无凝露(工作) 15％～95％无凝露(储运)二、 产品外观及尺寸图产品尺寸：安装方式：86盒三、 接线说明电源：AC/DC 12~24V 注意：本产品供电请使用直流（DC ）电源，部分交流（AC ）电源产品可能对产品造成损坏，请谨慎使用。

网口：默认IP 地址192.168.1.88全隔离RS485接口：A接正（+）B接负（-）四、登录触摸屏Web服务器网线接到Ethernet口下，在浏览器上输入URL：http://192.168.1.88/login.html登陆用户名：admin 密码：admin123456注：进入web服务器后下载X2View配置软件，具体操作请参考Help文件夹下的PDF文档。

五、触摸屏使用配置步骤（参考X2View组态软件操作说明书）：●登录触摸屏Web服务器网线接到网口，默认IP地址：192.168.1.88 登录用户名：admin 密码：admin123456）●登录迅饶官网/，在“服务与支持/下载中心”栏下载对应配置软件。

●使用X2View组态软件配置相应工程（具体操作请参考Help文件夹下的PDF文档）。

●工程文件上传到触摸屏。

834L VIPER PLUSFRAME MOUNT GLASSBREAK/SELECTIVE VIBRATION DETECTORIEI 834L GLASSBREAK/VIBRATION DETECTORThe IEI 834L Viper Plus with Contact is a frame mount glassbreak/selective vibration detector. The Viper Plus contains a custom integrated circuit designed specifically to detect vibration signals associated with forced entry in a wide variety of surfaces including: windows, doors, walls and glass of all types. You can adjust the Viper Plus for sensitivity over a wide range, but it’s immune to low frequency vibration. The Viper Plus is a standalone sensor with no additional processor required.IEI 834L Viper Plus Features• Patented Integrated Circuit Design• Solid-State Piezoelectric Device• No Separate Processor Required• Latching Alarm LED• Auto Reset Alarm Relay• Simplified Calibration Test Mode• Cover Tamper Contact• Double Knock Feature For Alarm Verification• Immune to Low Frequency Vibration• High-Low Sensitivity JumperAuto-Reset RelayWhen the Viper Plus goes into alarm, the relay contact remains open for 8 seconds before re-closing to detect a second independent attack, if necessary.Cover Tamper ContactThe cover is monitored against unwanted sensitivity changes or tampering with a switch mounted on the circuit board. This switch is internally wired in series with the alarm relay. No additional wiring is necessary.Double Knock ModeMost unwanted signals fade within 200 milliseconds. Prolonged attack or breaking glass exceeds this time. When Double Knock Mode is enabled and the Viper Plus detects a signal above set sensitivity level it enters the active mode but ignores all levels of signal for approximately 200 milliseconds. If the vibration remains above the set sensitivity level for more than 200 milliseconds, or a second attack exceeds the set sensitivity level within 8 seconds, the Viper Plus goes into alarm.Calibration Test ModeThe first time you trip your Viper Plus there is an 8 second delay before the LED turns on (the relay opens for 8 seconds as it normally does). After this first trip the LED remains on and shows each subsequent trip by turning off for 8 seconds. When you are finished testing, interrupt the power to reset the LED for normal operation. SpecificationsOperating Voltage: 10-15VDC (filtered and regulated) Power Consumption: 6mA (normal); 13mA (alarm) Range: Up to 10 ft. radiusVoltage Monitor: Low or No Voltage cause alarm activation Voltage Supervision: Alarm RelayRelay Activation Time: 8 secondsAlarm LED: Latch or auto-resetAlarm Relay: SPST (form A) contacts, 0.5A @ 30VDC Installation: Hardwire 4 wiresOperating Temperature: 0 ° to 120 ° F (-20° to 50°C) Mounting: Surface – screws includedSensor Size: 3.35” long x 0.90” wide x 1.00” high Weight: 2.1 ouncesColor: WhiteInstallation InstructionsMounting the Viper PlusMount the Viper Plus on the door or window frame, as shown in the illustrated examples. Do not install across structural members or at joints in construction in frames or bridge any other two components in a structure. Make sure you mount the Viper Plus on a flat surface, clear of bumps or grit. Also verify the mounting surface is in good physical condition with no loose or rattling parts. You must take additional care when installing in areas accessible to the public. In areas where protection is required for larger areas and low sensitivity desired for better false alarm rejection (such as windows adjacent to a public sidewalk) use two Vipers.To remove the cover, unscrew the retaining screw on the front. The unit consists of two pieces, the cover and the base plate with the circuit board. Position the base plate on the surface and mark the mounting holes. The self-tapping screws are suitable for most materials. For metal frames, drill a 3/32” pilot hole. Be careful not to damage the circuit board in the base plate when driving screws.Note: When mounted, the cover must not make contact with another surface. Wiring the Viper PlusYou can run the wires either through the back of the base plate using the wire slot (for concealed wiring - see diagram), or through the bottom of the cover using the rubber grommet. To use the grommet you must cut out the area on the bottom of the cover indicated by the indentations on the inside.When mounting vertically install the Viper Plus so the wires enters from the bottom of the unit, to prevent water entry. When mounting horizontally, remember to add a drip to loop to prevent water from running along the wires and entering the case.The diagram below shows the four terminal strip connections. Attach power leads to +12VDC and GND terminals. When connecting the power, you must observer polarity. Also, use a filtered and regulated power supply, with at least four hours of standby time. You should also provide a switch or other circuit to interrupt power to reset a latched alarm LED (if selected).Attach a normally closed loop from your control panel to the remaining tamper loop terminals. These are “open” until the Viper Plus is powered up. The cover tamper switch and magnetic reed switch are in series with the alarm relay circuit. These must be in place for the circuit to close.When finished wiring, secure the cover onto the base plate and turn on the power. Calibrating the Viper PlusThe Viper Plus has a test feature that eliminates the need to manually reset power during testing. The first time you trip the Viper Plus there is an 8 second delay before the LED turns on (the relay opens for 8 seconds as it normally does). After the first trip the LED remains on and shows each subsequent trip by turning off for 8 seconds. When finished with testing, interrupt power to reset the LED for normal operation. To disable the LED turn dipswitch 2 off.You should set the sensitivity as low as possible to reduce the change of false alarms. The Viper Plus has a High-Low jumper setting to increase or decrease its sensitivity. With the jumper in place, the Viper is set for Low sensitivity mode. By removing the jumper, the Viper becomes more sensitive. To set the sensitivity, use the IEI-815 calibration tool. This device puts a predetermined amount of shock into the window or doorframe. If you don’t have the IEI-815 tool, simply protect the surface and impact it with a hard object like a small hamper or the back of a screwdriver, taking care not to damage the surface.Trip the Viper Plus at the limit of protection desired. Remember that the Viper Plus will respond to one large blow or several small ones. Where it’s likely that more than one blow is required to breach a window or door, apply several “hits” of the IEI 815 within an 8 second period to simulate the shock to set the sensitivity. Calibrate around the extremities of the area and progressively decrease sensitivity by rotating the sensitivity adjustment potentiometer counter clockwise. When you reach a point where the Viper Plus no longer trips, slightly increase the sensitivity until the LED response is obtained.DO NOT USE THE CALIBRATION TOOL DIRECTLY ON GLASS!Double Knock SettingFor increased resistance to false alarms use the “double knock” feature. After the initial shock, the Viper Plus continues to analyze the signal for another 8 seconds. If another large shock or several smaller ones occur within the next 8 seconds the Viper Plus goes into alarm. To enable this feature set dipswitch 1 to off. This feature is ideal for laminated and bulletproof glass.IEI Limited WarrantyBecause the manufacturer does not install or connect this security device the manufacturer cannot guarantee its performance. Therefore, there are not warranties, expressed or implied (except as stated below), attached to the sale of this product.The manufacturer warrants against defects in material an workmanship in this device for 3 years from the date of manufacture. During the warranty period the manufacturer, at its sole option, will repair or replace free of charge any defective unit returned freight prepaid. This warranty shall remain in force and effect for 3 years provided the unit was properly installed and operated, has not been subject to misuse and has not been repaired or altered other than by the original manufacturer.The forgoing states the buyer’s sole and exclusive remedy for any breach of warranty or for any claim, whether sounding in contract, tort, strict liability, or negligence, based upon any defect in this security device.The manufacturer shall in no event be responsible for any incidental or consequential damages incurred by the buyer.This warranty supersedes all previous warranties.International Electronics, Inc.427 Turnpike St.Canton, MA 020211-800-343-9502 (outside MA)。