CAM58C10-BF6XXR-4096-8192编码器

• Sturdy model to industry standard, ø58 mm housing• Many variations, also customized versions • Short-circuit proof outputs • Reverse connection protection (at U B = 10 ... 30 V DC)• Highly flexible PUR-cable • Resolution up to 36000 ppr • High shaft loadShaft/hollow shaft 5800/5820: Standard5803/5823: High temperature up to 110 °C 5804/5824: Voltage sine wave outputs 5805: High resolution up to 36000 ppr 5826: Stainless steel housingMechanical characteristics:Electrical characteristics RS422/Push-pull:Speed with seal: Shaft version max. 12000 min -1Hollow shaft version 5)max. 000 min -1Speed without seal: Hollow shaft version max. 12000 min -1Rotor moment of inertia: Shaft version approx. 1.8 x 10-6kgm 2Hollow shaft version approx. 6 x 10-6kgm 2Starting torque: Shaft version < 0.01 NmHollow shaft version <0.05 Nm Radial load capacity of shaft*: 80 N Axial load capacity of shaft:*: 40 NWeight: approx. 0.4 kgProtection acc. to EN 60 529: IP 65, IP 66 for type 5826Working temperature: -20 °C ... +85 °C 1)2)3)5803/5823: -20 ... + 105 °C Shaft: stainless steel Shock resistance acc. to DIN-IEC 68-2-27 1000 m/s 2, 6 msVibration resistance acc. to IEC 68-2-6: 100 m/s 2, 10...2000 HzOutput circuit: RS 422 RS 422 Push-pull Push-pull (TTL-compatible) (TTL-compatible)Supply voltage: 5 V (±5%) or 5 ... 30 V DC 10 ... 30 V DC 5 ... 30 V DC 10 ... 30 V DCPower consumption (no load) – – typ. 55 mA / typ. 55 mA /without inverted signal: max. 125 mA max. 125 mA Power consumption (no load) typ. 40 mA / typ. 40 mA / typ. 80 mA/ typ. 80 mA/with inverted signals: max. 90 mA max. 90 mA max.150 mA max.150 mA Permissible load/channel: max. ±20 mA max. ±20 mA max. ±30 mA max. ±30 mA Pulse frequency: max. 300 kHz max. 300 kHz max. 300 kHz max. 300 kHz Signal level high: min. 2.5 V min. 2.5 V min. UB-2.5 V min. UB-1.5 V Signal level low: max. 0.5 V max. 0.5 V max. 2.0 V max. 2.0 V Rise time t r max. 200 ns max. 200 ns max. 1 µs max. 1 µs Fall time t f max. 200 ns max. 200 ns max. 1 µs max. 1 µs Short circuit proof outputs:1): yes 2) yes 2) yes yes Reverse connection protection at U B : 5 V: no, 1 yes yes no 0 ... 30 V: yes UL certified File 224618Conforms to CE requirements acc. to EN 61000-6-2, EN 61000-6-4 and EN 61000-6-3RoHS compliant acc. to EU guideline 2002/95/EG1)If supply voltage correctly applied2)Only one channel allowed to be shorted-out:(If UB=5 V, short-circuit to channel, 0 V, or +UB is permitted)(If UB=5-30 V, short-circuit to channel or 0 V is permitted)1) Constant flexing: -20 ... +70 °C 2)Non-condensing3)Hollow shaft version with seal: -20 ... +80 °C 5) For continuous operation 3000 min -1, ventilatedElectrical characteristics sine wave output:Output circuit: Sine wave Sine wave U = 1 Vpp U = 1 Vpp Supply voltage: 5 V (±5%) 10 ... 30 V DC Current consumption typ. 65 mA / typ. 65 mA / (no load) with inverted signals: max. 110 mA max. 110 mA -3 dB frequency: <180 kHz <180 kHz Signal level channels A/B: 1 Vpp (±20%) 1 Vpp (±20%) Signal level channel 0: 0.1 ... 1.2 V 0.1 ... 1.2 V Short circuit proof outputs:1): yes yes Reverse connection protection at UB: no yes UL certified File 224618Conforms to CE requirements acc. to EN 61000-6-2, EN 61000-6-4 and EN 61000-6-3RoHS compliant acc. to EU guideline 2002/95/EG1) If supply voltage correctly appliedTop view of mating side, male contact base:12 pin plug7 pin plug10 pin plugDimensions shaft version:Clamping flange ø 58Flange Type 1Mounting advice:The flanges and shafts of theencoder and drive should not both be rigidly coupled together at thesame time! We rec-ommend the use of suitable couplings (see Accessories section).I n c r e m e n t a l E n c o d e r sSignal: 0 V 0 V +U B +U B A A B B 0 0 Schirm Sensor 2) Sensor 2)12-pin. Connector, Pin: 10 11 12 2 5 6 8 1 3 4 PH 1)7-pin. Connector, Pin: F –- D E A – B – C - G 10-pin. Connector, Pin: F - D E A G B H C I J Cable colour: 5800, 5803, WH WH . BN BN . GN YE GY PK BU RD 5804, 5805, 5823, 5824, 5825: 0,5 mm 2 0,5 mm 2Cable colour: 5820, 5826: WH GY PK BN BU RD GN YE GY PK BU RDTerminal assignment1) PH = Shield is attached to connector housing2) The sensor cables are connected to the supply voltage internal-ly if long feeder cables are involved they can be used to adjust or control the voltage at the encoder- If sensor cables are not in use, they have to be isolated or 0 V Sensor has to be connected to 0 V and U BSensor has to be connected to U B- Using RS 422 outputs and long cable distances, a wave impedance has to be applied at each cable end.Isolate unused outputs before initial startup.Synchronous flange ø 58Flange Type 2- flexibly installed: 70 mmDimensions shaft version:3 x M3, 5 [0,2] deepOrder code shaft version:8.580X.XXXX.XXXXType00 =Standard03 =High temperature 04 =Sine wave 05 =High resolutionFlange1 = Clamping flange ø 582 = Synchronous flangeø 58Shaft (ø x L)1 = ø 6 mm x 10 mm2 = ø 10 mm x 20 mmType of connection and supply voltage Type 58004 = RS 422 (with inverted signal)5 V supply voltage5 = RS 422 (with inverted signal)10 ... 30 V supply voltage6 = Push-pull (with inverted signal)10 ... 30 V supply voltage7 = Push-pull (without inverted signal)10 ... 30 V supply voltage8 = Push-pull (without inverted signal)5 ... 30 V supply voltage9 = Push-pull (with inverted signal)5 ... 30 V supply voltageY = RS 422 (with inverted signal)5 ... 30 V Supply voltageT = Push-Pull (with inverted signal)5 ... 30 V supply voltagePulse rate25, 50, 60, 100, 125, 200, 250, 256, 300, 360, 500, 512, 600, 720, 800, 1000, 1024, 1200, 1250, 1500, 2000, 2048, 2500, 3000,3600, 4000, 4096, 5000Type 5805: 6000, 7200, 8000, 8192,9000, 10000, 18000, 36000(e.g. 250 pulses => 0250)Other pulse rates available on requestType of connection1 = Cable axial (1 m PUR-Cable)2 = Cable radial (1 m PUR-Cable)3 = axial 12 pin plug withoutmating connector5 = radial 12 pin plug withoutmating connector W 1)= 7 pin plug, "MIL"-specified 2)without mating connector, radial Y = 10pin plug, "MIL"-specified 2)without mating connector, radial1)only with output 72)only for type 5800Accessories:Corresponding mating connector to connection type 3 or 5:Order-No. 8.0000.5012.0000Corresponding mating connector to connection type W:Order-No. 8.0000.5052.0000Corresponding mating connector to connection type Y:Order-No. 8.0000.5062.0000Cables and connectors, also pre-assemb-led, can be found in the chapter Counting TechnologyMounting attachments and couplings can be found in the Chapter AccessoriesP r e f e r r e dt y p e s a r e i n d i c at e d i n b o l dType 5803 and 58054 = RS 422 (with inverted signal)5 V supply voltage5 = RS 422 (with inverted signal)10 ... 30 V supply voltage6 = Push-pull (with inverted signal)10 ... 30 V supply voltage7 = Push-pull (without inverted signal)10 ... 30 V Supply voltageType 58041 = Sine, 1 Vpp (with inverted signal)5 V supply voltage2 = Sine, 1 Vpp (with inverted signal)10 ... 30 V Supply voltageDimensions hollow shaft:Flange Type 3 and 4 with stator couplingCyl. pin acc. to DIN 7 ø 4Mounting advice:1)The flanges and shafts of the encoder and drive should not both be rigidly coupled together at the same time.2)When mounting a hollow shaft encoder,we recommend using a torque stop pin that fits into the torque stop slot or a sta-tor coupling.3)When mounting the encoder ensure the dimension Lmin. is greater than the axial maximum play of the drive. Otherwise there is a danger that the device could mechanically seize up.Note: minimum insertion depth 1.5 x D hollow shaftM3, 5 [0,2] deepI n c r e m e n t a l E n c o d e r sOrder code hollow shaft version:8.582X.XXXX.XXXXType20 =Standard23 =High temperature 24 =Sine wave 25 =High resolution 26 =Stainless steelFlange1 = Flange for through shaft2* = Flange for blind hollow shaft*3* = Flange for through shaft andstator coupling4* = Flange for blind hollow shaft andstator couplinglength of drive shaft £30 mm*not for type 5826Hollow shaft**1 = ø 6 mm without seal2 = ø 6 mm with seal3 = ø 8 mm without seal4 = ø 8 mm with seal5 = ø 10 mm without seal6 = ø 10 mm with seal7 = ø 12 mm without seal8 = ø 12 mm with sealFor type 5826 only versions 6 and 8 are possiblePulse rate25, 50, 60, 100, 125, 200, 250, 256, 300, 360, 500, 512, 600, 720, 800, 1000, 1024, 1200, 1250, 1500, 2000, 2048, 2500, 3000,3600, 4000, 4096, 5000Type 5825: 6000, 7200, 8000, 8192,9000, 10000, 18000, 36000(e.g. 250 pulses => 0250)Other pulse rates available on requestType of connection1 = Cable radial (1 m PVC-cable)21) = radial 12pin plug withoutmating connector1)not for type 5826Type of connection and supply voltage Type 5820 and 58261 = RS 422 (with inverted signal)5 V supply voltage2 = Push-pull (without inverted signal)10 ... 30V supply voltage3 = Push-pull (with inverted signal)10 ... 30V supply voltage4 = RS 422 (with inverted signal)10 ... 30 V supply voltage5 = Push-pull (without inverted signal)5 ... 30 V supply voltage6 = Push-pull (with inverted signal)5 ... 30 V supply voltage7 = RS 422 (with inverted signal)5 ... 30 V supply voltageC* =Push-pull (7272 with inverted sig-nal)5 ... 30 V supply voltage * For Type 5826 not availableType 5823 and 58251 = RS 422 (with inverted signal)5 V supply voltage2 = Push-pull (without inverted signal)10 ... 30V supply voltage3 = Push-pull (with inverted signal)10 ... 30V supply voltage4 = RS 422 (with inverted signal)10 ... 30 V supply voltageType 58241 = Sine, 1 Vpp (with inverted signal)5 V supply voltage2 = Sine, 1 Vpp (with inverted signal)10 ... 30 V supply voltageP r e f e r r e dt y p e s a r e i n d i c at e d i n b o l dAccessoriesCorresponding mating connector to Type of connection 2,12 pin: Order No. 8.0000.5012.0000 pin assignment cwVarious mounting variations can be suppliedDelivery includes:1 x parallel pin with thread Order No. 8.0010.4700.00001 x mounting flanges Order No. T.035.009Screw M3x5Order No N.630.3051 x long torque support slot Order No. T.051.672Complete set:Order No. 8.0010.4600.0000Mounting kit for hollow shaft encoder ø 58 mm:Stator coupling two wings– For highly dynamic applications Includes:1x coupling two wings 2x 2 screwsComplete set:Order No. 8.0010.4D00.0000Tether arm shortOrder No. 8.0010.4R00.0000– Cables and connectors, also pre-assemb-led, can be found in the chapter Counting Technology– Mounting attachments and couplings can be found in the Chapter Accessories。

旋变解码板使用说明书Rotary transformer resolution manual深圳市欧诺克科技有限公司1旋变解析卡型号说明RS 10- 10 07 I 09RS:resolver(解析器)额定电压I:increament （增量式）10:1024线励磁电压10:10KHz解析器型号编码器线额定电压激励频率励磁电压RS10-1003I09102418~90VDC 10KHz 2.4VACrms RS10-1003I18102418~180VDC 10KHz 2.4VACrms RS10-1007I09 102418~90VDC 10KHz 7VACrms RS10-1007I18102418~180VDC10KHz7VACrms旋变解析卡型号汇总编码器线激励频率03:2.4VACrms 07:7VACrms编码器09:18~90VDC 18:18~180VDC旋变解码板1、产品概述本产品由深圳市欧诺克科技有限公司生产的旋变解码板主要用于旋变解码，可以将旋变信号转换为光电编码器的信号格式（A+、A-、B+、B-、Z+、Z-），输出位数12位，对应仿真增量式编码器为1024 线。

2、技术指标（1）外形尺寸：≤80mm×70.8mm×24.5mm （长×宽×高）；（2）电源输入：20-90VDC或者20-180VDC；（3）工作温度：-20℃～+85℃；（4）激励频率：10KHz；（5）励磁电压：7VACrms或者2.4VACrms；（6）支持旋变类型：变压比为 0.5 的绕线式旋变和变压比为 0.286 的磁阻式旋变；3、性能特点（1）采用电源隔离技术：内部电源与外部输入电源隔离，满足客户可靠性和抗干扰性能的要求；（2）ESD 安全设计：对解码板旋变激励信号、旋变正余弦信号进行 ESD 保护设计，提供高达2KV 的 ESD 保护功能；（3）增强型激励信号驱动技术：本产品设计的激励信号驱动电流最高可达1.8A，满足绝大部分旋变激励的需要；（4）旋变激励信号输出保护电路设计；解码板输出的旋变激励信号发生异常短路时，不会损坏产品，提高了产品可靠性；4 、接口定义（1）J1 接口定义（编码器接口）解码板端采用 ZH1.5-11AW或XH2.5-7P连接器，本公司会配上这个端子的连接线。

PAMM58C10-BF6XXR-4096/8192编码器简介 应用行业：一． BEN 绝对值编码器的常规外形：38MM,58MM,66MM,80MM.100MM.二． BEN 绝对值编码器分为：单圈，多圈。

三． BEN 绝对值编码器按原理分为：磁绝对值编码器，光电绝对值编码器四． BEN 绝对值编码器出线方式分为：侧出线，后出线五． BEN 绝对值编码器轴分为：6MM,8MM,10MM,12MM,14MM,25MM.六． BEN 绝对值编码器分为：轴，盲孔，通孔。

七．BEN 绝对值编码器防护分为：IP54-68.八． BEN 绝对值编码器安装方式分为：夹紧法兰、同步法兰、夹紧带同步法兰、盲孔（弹簧片，抱紧）、通孔（弹簧片，键销）九． BEN 绝对值编码器精度分为：单圈精度和多圈精度，加起来是总精度，也就是通常的多少位（常规24位，25位，30位，32位。

）。

十． BEN 绝对值编码器通讯协议波特率：4800~115200 bit/s，默认为9600 bit/s。

刷新周期约1.5ms ★精芬机电传感器 * 机床 * 航天航空、 * 造纸印刷、 * 水利闸门、 * 纺织机械 * 灌溉机械 * 军工设备 * 食品机械 * 钢铁冶金设备 * 机器人及机械手臂 * 港口起重运输机械 * 精密测量和数控设备PAMM58C10-BF6XXR-4096/8192编码器 外形尺寸PAMM58C10-BF6XXR-4096/8192编码器技术参数BEN编码器的发展，从增量值编码器以转动时输出脉冲，通过计数设备来计算其位置，当编码器不动或停电时，依靠计数设备的内部记忆来记住位置。

这样，当停电后，编码器不能有任何的移动，当来电工作时，编码器输出脉冲过程中，也不能有干扰而丢失脉冲，不然，计数设备计算并记忆的零点就会偏移，而且这种偏移的量是无从知道的，只有错误的生产结果出现后才能知道。

解决的方法是增加参考点，编码器每经过参考点，将参考位置修正进计数设备的记忆位置。

Motor Driver HAT用户手册产品概述Motor Driver HAT是专为树莓派控制电机而设计的，使用I2C接口控制，适用于驱动小车电机。

特点⚫基于树莓派接口设计，适用于Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+⚫I2C接口控制，通过改变5个地址跳线可以同时接多达32个模块⚫板载PCA9685芯片，可输出12位硬件PWM控制电机转速⚫板载TB6612FNG双H桥电机驱动芯片，工作高效，不易发热⚫板载5V稳压芯片，输出可达3A电流，可通过VIN端子接入电池供电⚫预留I2C控制接口，方便接入其他主控板⚫提供完善的配套资料手册(提供BCM2835、wiringPi与python例程)产品参数供电电压：6V ~ 12V(VIN端子)逻辑电压： 3.3VPWM驱动芯片：PCA9685PWM芯片接口：I2C电机驱动芯片：TBA6612FNG产品尺寸：65mm x 30mm固定孔通径： 3.0mm接口说明模块实物图如下：硬件资源硬件上实际上由三部分构成：电源、PWM、电机驱动电源输入端采用MP1584稳压芯片，该芯片支持4.5V到28V的宽电压输入，输出电流达3A。

虽然芯片支持最高28V的输入，但是由于给电机的工作电压也由VIN_USER供给，实际上输入电压最好保持在6-12V.MP1584稳压芯片输出5V，这个5V用于给树莓派供电，然后5V再通过RT9193-33转成3.3V电平，该电平给PWM、电机驱动这两部分提供逻辑电压PWM由于树莓派硬件PWM只有一个引脚GPIO.1，而且，虽然wiringPi库与python都有软件PWM，但是会占用部分CPU资源，因此本模块采用PCA9685芯片，该芯片使用I2C控制，可输出16路12位分辨率的PWM，可控制输出频率40HZ-1000HZ。

操作简单，只需要给芯片控制对应寄存器的值，即可一直输出PWM信号。

根据上面的原理图，我们可以看出LED0-LED5为控制电机驱动芯片管脚。

新华龙电子有限公司 Tel: (024)23930366 Fax: (024) 23940230 CYGNAL C8051F005模拟外设12位100KSPS ADC 1LSB INL 无失码可编程转换速率最大100ksps8个外部输入可编程为单端输入或差分输入 可编程放大器增益1684210.5 数据相关窗口中断发生器内置温度传感器3°C 两个12位DAC 电压输出10微秒建立时间 两个比较器16个可编程滞回电压值 可用于产生中断或复位 基准源2.4V 15ppm/°C 外部基准输入VDD 监视器和节电降压检测器 片内JTAG 仿真片内JTAG 仿真电路提供全速非侵入式的电路内仿真支持断点单步观察点 观察/修改存储器和寄存器比使用仿真芯片目标仿真头和仿真插座的仿真系统有更好的性能完全符合IEEE1149.1¥1560仿真套件C8051F005DK8051兼容的微控制器内核流水线指令结构70%的指令的执行时间为一个或两个系统时钟周期速度可达25MIPS 时钟频率为25MHz时 增强的中断系统可有最多22个中断源 存储器2304字节数据存储器32K 字节闪速存储器可以在系统编程扇区大小为512字节 数字外设32个I/O 口线所有口线均容许5V 电压可同时使用的硬件I 2C TM /SMBus TM SPI TM 及UART 串口16位可编程的计数器/定时器阵列带5个捕获/比较模块每一个都可配置为8位PWM 4个通用16位计数器/定时器 专用的看门狗定时器双向复位 时钟源内部可编程振荡器2-16MHz外部振荡器晶体RC C 或外部时钟 可在运行中切换时钟源节电模式时使用 供电电压………………………………2.7V - 3.6V 典型工作电流12mA @ 25MHz 多种节电休眠和停机模式 64脚TQFP 封装温度范围-40°C - +85°CI 2C 是菲力蒲半导体的注册商标SMBus 是英特尔公司的注册商标SPI 是摩托罗拉的注册商标TCK TMS TDI TDO DAC0AIN0AIN1AIN2AIN3AIN4AIN5AIN6AIN7P1.0P1.1P1.2P1.3P1.4P1.5P1.6P1.7P0.0P0.1P0.2P0.3P0.4P0.5P0.6P0.7P3.0P3.1P3.2P3.3P3.4P3.5P3.6P3.7P2.0P2.1P2.2P2.3P2.4P2.5P2.6P2.7DAC1CP0+CP0-CP1+CP1-VREFAV+AV+VDD VDD VDD DGND DGND DGND AGND AGND/RSTXTAL1XTAL2新华龙电子有限公司 Tel: (024)23930366 Fax: (024) 23940230 CYGNAL C8051F005选定的电气技术条件 TA=-40- +85除非另有说明参 数条 件最小值典型值最大值单位总体特性 模拟电源电压 2.7 3.6 V模拟供电电流内部REF ADC DAC 比较器全部处于运行状态0.8 mA 模拟子系统被禁止时的 模拟供电电流 内部REF ADC DAC 比较器全部处于禁止状态5 A 数字电源电压 2.7 3.6 V CPU 运行时的 数字供电电流Clock=25MHz Clock=1MHzClock=32KHz 12 0.520 mA mA ACPU 处于停机模式的 数字供电电流振荡器停止2 A VDD 数据维持电压 RAM 保持有效1.5 V CPU 和数字I/O时钟频率范围DC 25 MHz 端口输出高电压 I OH =-3mA I/O 口上拉VDD - 0.7 V 端口输出低电压I OL =8.5mA 0.6 V 输入高电压 0.8VDDV 输入低电压 0.2VDDV SMBus SCL 频率 SYSCLK=MCU 系统时钟SYSCLK/8 MHz SPI 总线时钟频率 SYSCLK=MCU 系统时钟SYSCLK/2 MHz A/D 转换器分辨率 12 比特积分非线性1 LSB 微分非线性 保证单调1 LSB 转换速率100 ksps 输入电压范围0 VREF V D/A 转换器分辨率 12 比特积分非线性 从数据字014h 到FEBh4 LSB 微分非线性 保证单调1 LSB 偏移误差 数据字=014h3 LSB 输出建立时间 到满度值的 ½ LSB10 S 输出电压摆幅0 VREF-1LSB V 比较器供电电流 每个比较器1.5 A 响应时间4 S 输入电压范围-0.25 (A V+) + 0.25 V 输入偏置电流-5 0.001 +5 nA 输入偏移电压-10 +10 mV。

BEN绝对值编码器BE622SM58说明书精芬机电绝对值编码器并行输出信号说明书* 单圈绝对值并行信号输出* 12位4096线分辨率* 宽工作电压范围，10~30Vdc或5Vdc，极性保护，顺、逆方向测量可设。

* 宽工作温度范围，-25~70℃；储存温度：-40~100℃* 并行推挽输出，正、负逻辑可选，绝对值格雷码，可直接连接各种设备* 夹紧法兰或同步法兰，国际标准型外形，其他外形可选* 用于恶劣环境条件下的绝对值编码器（潮湿、灰尘、冲击和振动）在使用编码器前，请完整阅读下面的说明，正确使用！特性参数一、接线说明：12位16芯连接电缆二、外形尺寸：夹紧法兰外形尺寸:同步法兰外形尺寸:三、输出信号Be622 PB的输出为并行推挽式输出信号，与PLC的输入模块（I/O）连接如下图：注意：编码器并行信号线高电平有效，适用于NPN 、PNP等信号类型。

其中NPN为低电平信号有效，PNP为高电平有效四、注意事项：*编码器属精密仪器,请勿敲击或撞击编码器,轻拿轻放,小心使用；*保证编码器电源在10-30Vdc范围内,并做隔离,防止电网内大型起动电气对编码器产生冲击；* 在强电磁干扰的环境下,信号线最好使用专用线,如对绞双屏蔽电缆，可向本公司订购；* 编码器信号线应做到良好接地:2米内近距离,电缆屏蔽网两端均应接地;较远距离,编码器金属外壳接地,编码器自带电缆屏蔽网悬空,信号加长电缆屏蔽网在信号接收端单端接地;若信号电缆较长或在户外使用时,应将信号电缆套上金属铁管,并且将金属管两端接地使用；* 编码器的防护等级为IP65,（附检测报告备索）,可防水使用,但编码器转轴处请勿浸水。

* 编码器轴与机械连接应选用专用的柔性联轴器，推荐使用F60022。

附推荐的编码器联轴器：S: M4S: M41．ORICOD其余产品型号：BEN总公司介绍,JFSH旗下编码器,DXS58/1213ECL10PGBR010绝对值多圈编码D XS58/1213ECL10LBR010绝对值编码器D XM58/1213ECL10R4BR010绝对值总线编码器D XM58/1213ECL10DPBR01,DXM58/1212ECS10SGBR010,DXSM58/1212ECS10LBS详谈见上面编码器图片联系方式。

内策尔（Netzer）容栅编码器是一种用于精确测量旋转轴位置的设备，它通过电容感应原理来实现非接触式的位置检测。

以下是一些关于内策尔容栅编码器的主要参数：
1. 产品型号：内策尔提供多种型号的容栅编码器，如DS25、DS37、DS58、DS70、DS90和DS130等，以满足不同应用场景的需求。

2. 外径尺寸：这些编码器的外径范围从16mm到300mm不等，适用于各种不同的机械尺寸和空间限制。

3. 分辨率：分辨率是指编码器能够区分的最小角度变化，这通常取决于编码器的设计和内部结构。

4. 工作温度：编码器能够在一定的温度范围内正常工作，这个范围定义了其适用的环境条件。

5. 输出接口：编码器可能提供多种输出接口，如模拟信号、数字信号、SSI或SPI等，以便于与不同的控制系统连接。

6. 电源电压：编码器工作时所需的电源电压范围。

7. 最大转速：编码器能够承受的最大旋转速度，超过此速度可能会影响其性能或损坏设备。

8. 防护等级：编码器的防尘防水等级，如IP65或IP67，表示其对环境条件的适应能力。