水溶性切削液
Dromus Oil B [ 壯馬士 ]
Technical Properties 品質指標
密度閃點流點黏度黏度指數?
Density @15 ℃ Kg/1 Flash Point
Open Cup ℃
Pour Point
℃
Viscosity
Kinematic.Cst Viscosity
Index
40 ℃100℃
Shell Dromus
B
0.910 160 -- -- -- --
Application 用途?Premium quality soluble cutting oil
good for the following cutting
applications:
o Boring, drilling, deep
drilling
o Cold sawing
o Milling
o Tapping
o Threading,Thread Rolling
o Turning
o Grinding·
?It is good for machining following metals :-
o Free machining non - ferrous
metal
o Tough non - ferrous metals
o Steel up to 1100 MN/m2 UTS·?For general machining operations, water - to - oil rations of between
25:1 & 35:1 are recommended for
grinding operations, rations should
be 35:1 & 50:1.·
?Also used to inhibit against
corrosion in water cooling system at
a concentration of 1 to 5%. ?高級水溶性切削油,適用於以下切削工序:
o鏜、鑽孔、深孔鑽。
o冷鋸。
o銑。
o攻螺絲。
o車螺紋、軋螺紋。
o切削。
o研磨。
?·適合用於以下金屬加工:
o高速切削有色金屬。
o堅韌有色金屬。
o鋼 (不超過1100MN/M2
UTS)
?用於一般性加工操作時,水對油比例由25:1至35:1。用在
研磨工序時,水對油比例為
35:1 及 50:1。
?在冷卻水系統中作防腐蝕用,濃度則為1%-5%。
Performance Characteristics 性能特徵
?High quality soluble cutting oil blended from fully solvent refined
base oil, emulsifiers & additives.·?It form a stable milky emulsion of the oil in water type then added to
water.·
?It can retain its excellent antirust & anticorrosion properties over a
long period giving continuous
protection to the machines.
?It combines good cooling with good ?·優質水溶性切削油,由精煉基礎油,乳化劑及其他添加劑配
制而成。
?加入水中成穩定奶白狀乳化液。
?可長期保持超卓防銹及防腐蝕性以持久保護金屬機械。
?提供優良冷卻性及潤滑性。
lubricating property.
Technical Specification技術規格 · FORD EMC 00340