3-WLAN产品介绍-弘浩明传
- 格式:ppt
- 大小:2.13 MB
- 文档页数:13
HYG-3000万兆智慧WiFi网关路由产品手册深圳维盟科技有限公司版权声明维盟科技©2016维盟科技版权所有,并保留对本手册及本声明的一切权利。
未得到维盟科技的书面许可,任何人不得以任何方式或形式对本手册内的任何部分进行复制、摘录、备份、修改、传播、翻译成其他语言、将其全部或部分用于商业用途。
免责声明本手册内容依据现有信息制作,由于产品版本升级或其他原因,其内容有可能变更。
维盟科技保留在没有任何通知或者提示的情况下对手册内容进行修改的权利。
本手册仅作为使用指导,维盟科技在编写本手册时已尽力保证其内容准确可靠,但并不确保手册内容完全没有错误或遗漏,本手册中的所有信息也不构成任何明示或暗示的担保。
一、产品描述产品图片HYG-3000万兆智慧WIFI网关采用四核高性能网络处理器,主频高达3.2GHz,8G内存(页面显示4G,另外4G做为系统缓存)。
采用全新的Linux内核,运用WAYOS独特QOS算法,适用2000-3500台机器左右的企业、网吧、商场、展馆等场所。
支持1,716,000个并发连接数,AP承载量为512个,支持USB存储。
还支持智慧WIFI营销系统,可自定义WIFI认证页面,支持手机短信,QQ,微博登陆。
拥有WIFI欢迎页面和品牌营销页面,强大品牌宣传和顾客回访功能。
二、产品特性★高端的硬件架构,高速稳定的性能HYG-3000由器采用业界领先的电信级网络处理器,最高主频达3.2GHz,同时配备独特的SFP+万兆光钎口支持WAN、LAN切换,高速的DDR3内存,结合Wayos独有的硬件加速技术,快速识别应用层协议并执行迅速有效的应用调度,能将吞吐量及带机量提高数倍。
宽频电信级电源设计,采用电信级的开关电源,具有防雷设计、防过压设计、防浪涌设计,电压可适应100~265V大范围,保证在不良自然天气及电压不稳环境下网络的正常运行。
★支持多WAN接入和智能选路多线路负载均衡和线路备份,最大化优化网络,保障线路的畅通,满足电信、网通、联通等多家网络服务商的接入。
DATASHEETProduct DescriptionJuniper Networks ® NSMXpress and NSM3000 are purpose built security hardenedappliance versions of Juniper Networks Network and Security Manager (NSM) optimized towards providing a single centralized management solution to effectively manage Juniper Networks family of devices including routers, switches, and firewalls.While the NSMXpress is primarily geared towards small to mid market, the NSM3000 scales to the requirements of large enterprise customers with the capability to manage up to 1,500 devices. These appliances, which install in minutes with high availability (HA) support, not only simplify the complexity of device administration by providing a single integrated management interface that controls every device parameter, but also eliminate the need to have dedicated resources for maintaining the management solution. NSM3000 and NSMXpress have the following features:• Provides an appliance version of NSM with a security hardened OS• Offers centralized, end-to-end device life cycle management for granular control of configuration, network settings and security policies • Allows for delegation of administrative roles, which provides relevant access to those who need it • Offers easy installation with operational efficiency that delivers lower total cost of ownership (TCO)• Provides dedicated HA supportProduct OverviewNow more than ever, networkoperators need the ability to easily manage security policies and tohave visibility into potential security concerns in the network. At thesame time, they need to invest their time in monitoring and operating secure networks. Juniper Networks NSM3000 and NSMXpress enable IT departments not only to control the entire device life cycle with a single, centralized solution, but also provides visibility with a complete set of investigative and reporting tools.NSM3000)Features and BenefitsHardened OSJuniper Networks security team monitors and maintains the OS, which is optimized for performance and ers don’t have to worry about security vulnerabilities, support or patch management for the OS.Firewall/VPN (SSG5, SSG20, SRX100,SRX110, SRX210, SRX220, SRX240, SRX550, and SRX650)3001500NSM3000in HA ModeNSM User InterfaceNSM3000SA SeriesFirewall/VPN EX Series NSM3000AdministrationWeb UIFigure 1: Managed Juniper Networks devicesNSMXPRESSNSM3000SpecificationsJuniper Networks Services and Supporthigh-performance network. Our services allow you to maximize operational efficiency while reducing costs and minimizingrisk, achieving a faster time to value for your network. Juniper Networks ensures operational excellence by optimizing the network to maintain required levels of performance, reliability, and availability. For more details, please visit /us/en/products-services.Juniper Networks Device and Software Support• EX Series Ethernet Switches• IC Series Unified Access Control AppliancesIC Series version 2.2 and above• ISG Series Integrated Security Gateways• IDP Series Intrusion Detection and Prevention Appliances IDP Series version 4.0 and above• J Series Services Routers• M Series Multiservice Edge Routers• MX Series 3D Universal Edge Routers• SRX Series Services Gateways• NetScreen Series Security SystemsScreenOS version 5.0.0 and above• SA Series SSL VPN AppliancesSA Series version 6.3 and above• SSG Series Secure Services Gateways• Junos® Operating System SupportJunos OS version 9.0 and above; forward support for Junos OS 9.6 software through schema updateNote: For more information on Network and Security Manager, please refer to the datasheet.About Juniper NetworksJuniper Networks is in the business of network innovation. From devices to data centers, from consumers to cloud providers, Juniper Networks delivers the software, silicon and systems that transform the experience and economics of networking. The company serves customers and partners worldwide. Additional information can be found at .1000204-007-EN Apr 2014Copyright 2014 Juniper Networks, Inc. All rights reserved. Juniper Networks, the Juniper Networks logo, Junos and QFabric are registered trademarks of Juniper Networks, Inc. in the United States and other countries. All othertrademarks, service marks, registered marks, or registered service marks are the property of their respective owners. Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice.APAC and EMEA Headquarters Juniper Networks International B.V. Boeing Avenue 240 1119 PZ Schiphol-RijkAmsterdam, The Netherlands Phone: +31.0.207.125.700 Fax: +31.0.207.125.701Corporate and Sales Headquarters Juniper Networks, Inc. 1194 North Mathilda Avenue Sunnyvale, CA 94089 USAPhone: 888.JUNIPER (888.586.4737) or +1.408.745.2000 Fax: +1.408.745.2100 To purchase Juniper Networks solutions, please contact your Juniper Networks representative at +1-866-298-6428 or authorized reseller.。
WLAN设备安装简介一、 WLAN用户驻地网设备1、APAP用于控制用户接入,AP天线发射无线信号,用户电脑搜索信号,并进行连接。
目前的AP设备有两个厂家,左图为弘浩明传的AP,右图为阿德利亚的AP。
2、交换机AP通过网线连接至交换机,根据交换机的端口数连接相应数量的AP,交换机固定在交换机保护箱内。
目前弘浩明传厂家的AP设备还需要供电模块,大小和交换机差不多,固定在交换机保护箱内。
下图为交换机。
3、ONU光缆的接入终端,光缆熔纤到交换机保护箱内熔纤盒,在熔纤盒跳纤至ONU,ONU通过网线连接至交换机。
下图为中兴ONU。
4、交换机保护罩交换机保护罩一般安装在弱电井,若无弱电井则安装在取电比较方便的墙壁位置。
ONU、交换机都安装在交换机保护罩内,左下图为交换机保护罩的外观,右下图为交换机和ONU以及电源插座固定在交换机保护箱内的图片。
1、AP放装AP固定在墙壁上或者天花板内,下图为AP加上保护罩固定在墙壁上。
2、AP与室分系统合路合路方式的AP一般安装在弱电井或者天花板里。
下图为交换机接网线连接至AP,然后与室分系统合路的图片。
WLAN设备安装时,应遵从以下原则:1、安装位置必须保证无强电、强磁和强腐蚀性设备的干扰;2、主机安装场所应干燥、灰尘小、且通风良好;3、主机安装位置便于馈线、电源线、地线的布线;4、安装主机的室内不得放置易燃品;5、室内温度、湿度不能超过主机工作温度、湿度允许的范围;6、AP 设备安装位置必须符合工程设计要求。
如有设备的安装位置需要变更,必须征得设计单位和建设单位的同意,并办理设计变更手续;7、如果AP 安装在弱电井内,则需做好防尘、防水、安全措施,为了防止AP 被盗,建议将AP 安装高米以上,并在固定架加锁或是将AP 安装在定做的机箱之中,并保持通风良好、通气孔畅通,保持工作环境清洁无灰尘。
全业务支撑中心2011-08-10。
河南移动济源分公司CPE测试报告弘浩明传科技(北京)股份有限公司2012年4月河南移动济源分公司CPE测试报告目录一、应用测试目的................................................................................................................................... - 2 -二、应用测试方案设计及应用测试标准............................................................................................... - 2 -2.1弘浩明传CPE无线网络产品优势............................................................................................ - 2 -2.2测试方案..................................................................................................................................... - 3 -三、应用测试项目和应用测试结果....................................................................................................... - 5 -3.1 测试............................................................................................................................................ - 5 -3.1.1 测试参数....................................................................................................................... - 5 -3.1.2测试位置:如下图.......................................................................................................... - 5 -3.1.3测试结果:如下图.......................................................................................................... - 6 -3.1.4测试截图:...................................................................................................................... - 7 -3.2 应用测试结果分析................................................................................................................ - 19 -四、应用建议......................................................................................................................................... - 19 -五、弘浩明传HM2400-WCPEN2规格参数表 ..................................................................................... - 22 -1. 硬件规格/ Hardware Specification .................................................................................................... - 22 -2. 软件规格/ Software Specification ..................................................................................................... - 23 -一、应用测试目的本次应用测试是针对河南移动济源公司CPE测试需求,由弘浩明传科技(北京)股份有限公司设计并提供HM2400-WCPEN2型CPE性能应用测试。
Mitel 5624 WIFI PhoneFeature rich SIP enabled VoWiFi phone with color display, telephony and messaging over 802.11 a/b/g/n WiFi networksThe Mitel 5624 WiFi handset is designed to be used in office and medium demanding environments such as hospitals. It is suitable for users who are dependent on voice and messaging features which make it ideal for applications where the user needs 2-way messaging or to be able to interact with other users.The Mitel 5624 WiFi Phone is a feature-rich SIP enabled VoWiFi phone with color display, providing telephony and messaging over the WiFi 802.11 a/b/g/n standards. The 5624 is delivered with standard telephony features which can then be enhanced using Services, Personal Alarm, Location and Shared Phone licenses.WiFi is ideally suited to businesses that have a need for both wireless voice and wireless data capabilities and prefer to deploy these services over a single, converged infrastructure.WiFi involves deploying a VoIP compatible Wireless LAN (WLAN) infrastructure that can support both VoIP (voice) applications and data applications concurrently. This provides for broader multipurpose use but requires more wireless Access Points, more precise site engineering, and ongoing management.The 5624 is Mitel’s first VoWiFi handset operating on 802.11n networks, it supports the deployment of voice over the network without degrading the performance of an existing 802.11n network’s capacity. A Mitel 5624 WiFi Phone based solution delivers trouble-free WLAN vendor interoperability and scalability, as well as the capacity to integrate and communicate with a comprehensive range of external sources.The Mitel 5624 can be managed and configured using the Mitel WSM Server along Mitel 5603/5604 handsets enabling a wide range of devices to be managed and configured in a mixed IP-DECT and WiFi environment.Key Features∙Supports WiFi 802.11 a/b/g/n standards ∙SIP RFC 3261 Compliant∙TFT 176 x 220 pixel backlit colordisplay∙Illuminated keypad∙Three Programmable soft keys∙Nine programmable hot keys∙Man-down and No-movement alarm∙Push button alarm∙Five configurable emergency numbers∙Vibrator∙Handsfree Speaker function∙ 2.5 mm Headset connector∙Push to talk© Copyright 2016, Mitel Networks Corporation. All Rights Reserved. The Mitel word and logo are trademarks of Mitel NetworksCorporation. Any reference to third party trademarks are for reference only and Mitel makes no representation of ownership of these marks.387862-R1607-EN∙ Full duplex Handsfree Speakerphone∙WiFi Handset with high quality voice, personal alarm (1) and messaging (2) ∙ Supports WiFi 802.11 a/b/g/n standards ∙Dynamic output power according to 802.11h standard ∙TFT color display with multiple colors with high resolution, more than 65000 individual colors, 176 x 220 pixel LCD with white LED backlighting ∙ 3 Programmable soft keys ∙ 9 Programmable hot keys∙Water, dust and chemical resistant for easy disinfection ∙Upgradeable by licenses, Services, Personal Alarm, WiFi Location and Shared Phone ∙Push button alarm, with ability to send different alarm types (1) ∙ Acoustic Location Signal(ALS) at alarm (1) ∙ Automatic call after alarm (1)∙Location WiFI (AP, Ekahau RTLSc and Cisco MSE ) (3) ∙ Messaging∙ Interactive Messaging ∙ Colored Messaging ∙ Message acknowledgement ∙ Voice mail (4) ∙ Push to talk (PTT)∙ Shared phone (3), supports virtual SIM ∙Centralized management ∙ Hearing Aid compatible (HAC)ALARMLocation types: Associated WLAN access point and Cisco MSE as standard, Ekahau as optionAlarm types: Single Button with 2 alarm types; long-press and double-press.AUDIORing signal: Adjustable in 8 steps and silent Earpiece: Adjustable in 8 steps of 3dB each Max sound ring signal level: 88 dBA @ 10 cm Loudspeaker: Full duplex handsfree functionCENTRAL PHONEBOOKMax name and number length: 40 characters in a name and 20 digits in a number – system dependentCOMPANY PHONEBOOKMax name and number length: 24 characters in a name and 24 digits in a number (1 number per name). Entries: 1000LOCAL PHONEBOOKStorage of contacts: - 48 character name. Entries 250 - 24 digit work number - 24 digit mobile phone number - 24 digit other number- Selectable ring tones per contactMESSAGINGMax message length: 160 characters from 5624 Handset. Message length to 5624 Handset is system dependent. Storage capacity: 30 received/sent messages.SETTINGSLanguages: 18 (Czech, Danish, Dutch, English, Finnish,French, German, Greek, Hungarian, Italian, Norwegian, Polish, Portuguese (Brazilian), Russian, Slovak, Spanish, Swedish, and Turkish), + 1 customizable.TELEPHONYIndication: 14 ring signals, flashing LED and vibrator Answer call: Button press or auto answerCall list storage capacity: 25 calls (received, dialed and missed) with time stamp and nameUSER INTERFACEIndicator: LED on top/front for visual indication of events and normal function. The LED may also be used for visual indication of a messageVibrator: Incoming calls, other audio events and messages Time and date indicationManual and automatic keypad lock Customizable UIProfiles, system and personalFeatures© Copyright 2016, Mitel Networks Corporation. All Rights Reserved. The Mitel word and logo are trademarks of Mitel NetworksCorporation. Any reference to third party trademarks are for reference only and Mitel makes no representation of ownership of these marks.387862-R1607-ENButtons/Keypad: - Soft keys 3 - Call key- End key and Power On/Off on the same key- Five way navigation key (OK button in the center of the key) - Numerical keys - Sound off key- Volume button up/down - Multifunction button (5) - Mute buttonADDITIONAL FEATURES· Clear lists in charger · Site survey toolBATTERYType: Li-polymerSpeech time: (6) 15 hours Stand-by time: (7) 100 hours Charging time: 2.5 hoursDischarge/charge cycles: >=80% capacity left after 400 full charge/discharge cycles Easy replaceable batteryCONNECTORSMulti-purpose connector: For battery charging, software download, and configurationHeadset connector: Standard 2.5 mmENVIRONMENTALOperating temperature: -5°C to +45°C Storage temperature: (8) -25°C to +55°C Charging temperature: ≥ +5°CEnclosure protection: IP44, IEC EN60529Immunity to 10V/m EN61000-4-3 electromagnetic fields: Immunity to ESD: 6 kV contact discharge and 8 kV air discharge (EN61000-4-2)Free fall test, standard product: IEC 60068-2-32, procedure1, dropped 12 times from 1 meterPHYSICALDimensions (l × w × d): 134 × 53 × 26 mm Weight: 135 g (battery and clip included) Material: Case: PC/ABS, Key pad: PC, Clip: PA12 GrilamidKeypad: I lluminated by white LED’s Color: BlackDisplay (w × h): 28 x 35 mmClip: Hinge-type (standard) or swivel-typeRADIOReceiver sensitivity -87 dBm (802.11a, 6Mbps), (typical values): -93 dBm (802.11b, 1Mbps), -87 dBm (802.11g, 6Mbps), -86 dBm (802.11n, MCS0) Frequency range: EU:b/g: 2.4–2.4835 GHz (Ch 1–13) and a: 5.18-5.24Ghz (UNII-1 channels,36,40,44,48), 5.47–5.725 GHz (Ch 100–140) USA/Canada:b/g: 2.4–2.4835 GHz (Ch 1–11) and a: 5.15–5.35 GHz (Ch 36–64), 5.47–5.85 GHz (Ch 100–165) Maximum output power: 100 mW / 20 dBm Modulation speed: b: 1, 2, 5.5, 11Mbps,a, g: 6, 9, 12, 18, 24, 36, 48, 54Mbps, n: MCS0-7ROAMING ENHANCEMENTPre-authentication Opportunistic Key Caching PMKSA cachingSECURITYSecurity standard: 802.11iEncryption methods: 64/128 bits WEP, TKIP, AES-CCMP Authentication methods: 802.1XOriginal 802.11 open/shared key authentication WPA-PSKWPA2-PSKPEAPMSCHAPv2EAP- TLSEAP-FASTAuthentication certificateTELEPHONYProtocol: SIP supporting RFC1889, RFC2327, RFC2833, RFC3261, RFC3264, RFC3265, RFC3515 and RFC3842WLANNumber of networks: 4 systems, manual selection Quality of Service (QoS): WMM, TSPEC-based CACSupported networks:802.11a/b/g/n (MCS0-7,20 MHz,800nS GI)Technical Specification© Copyright 2016, Mitel Networks Corporation. All Rights Reserved. The Mitel word and logo are trademarks of Mitel NetworksCorporation. Any reference to third party trademarks are for reference only and Mitel makes no representation of ownership of these marks.387862-R1607-ENMITEL PART NUMBER DESCRIPTION51302081:Mitel 5624 v2 WiFi Phone 2/battery & clipLICENSES51301216: Mitel 5624 Services License 51301217: Mitel 5624 Personal Alarm License51301218: Mitel 5624 Services to Alarm Upgrade License 51301219: Mitel 5624 WiFi Location License 51301220: Mitel 5624 Shared Phone License51302044:Personal Alarm to Man Down/No Movement Alarm UpgradeACCESSORIES51301221: Mitel 5624 Programmer 51015422: Mitel 5603/04/24 Charger - EU51015423: Mitel 5603/04/24 Charger - Global (excl EU) 51301129: Mitel 5603/04/07/24 Rack Charger – Global 51015430: Mitel 5604 Battery Pack Charger – Global 51015440: Mitel 5604 Leather Case 51015435:Mitel 5603/04 Security Chain1 Applicable to Mitel 5624 Personal Alarm only.2 Applicable to Mitel 5624 Services and Mitel 5624 Personal Alarm only.3 This function requires a license.4 This function is system dependent (refers to the voice mail indication feature)5 This is not available for Alarm licensed phones.6 Dependent of Active mode, U-APSD WLAN environment and configuration (refers to the speech time). Location in the system will also affect the speech time.7 The stand-by time is without activated screensaver.8 Note that storing Li-Polymer batteries at high temperature dramatically reduces its capacity. For example storage around maximum temperature reduces capacity with 20% in less than a month, permanently.。
泓格科技发布GTM-203M-3GWA工业级四频3G WCD-
MA调制解调器
佚名
【期刊名称】《测控技术》
【年(卷),期】2016(35)11
【摘要】泓格科技最新发布的GTM-203M-3GWA是一款具有USB及RS232接口的工业级M2M调制解调器;支援WCD-MA850/900/1900/2100MHz和GSM850/900/1800/1900MHz频段:GTM-203M-3GWA利用便利的2G/3G网络来监控远程设备、各种流量计或实时的远程控制;内建TCP/IPstack,只需搭配简单的控制命令即可联机上网。
【总页数】1页(P159-159)
【关键词】M2M调制解调器;3G网络;工业级;科技;RS232接口;四频;远程设备;远程控制
【正文语种】中文
【中图分类】TP334.7
【相关文献】
1.泓格科技发布Soft-GRAFHMI新应用——警报讯息与传送,若搭配2G/3G无线模块还可传送短信给一至多台手机 [J], 无
2.泓格科技GRP-520工业级3G网关 [J], 无
3.泓格科技发布新产品G-4513—3GWA [J],
4.泓格科技发布新产品——PM-3112-CPS/PM-3114-CPS二/四回路单相精巧
型CANopen电测模块 [J],
5.泓格发布GTM-204M-4GC工业级4GLTE调制解调器 [J],
因版权原因,仅展示原文概要,查看原文内容请购买。
AP胖瘦互转方法1、AP上电,通过网线将AP和PC连接,PC端IP地址设置为192.168.1.42;2、在PC上启动DHCP Server,等待DHCP Server给瘦AP分配临时IP地址;3、根据下发的地址,登陆AP https://192.168.1.X,继续浏览此网站(不推荐),地址栏会变为https://192.168.1.X/cgi-bin/login.cgi(可以登录也可以不登录);4、将https://192.168.1.X/cgi-bin/login.cgi该为https://192.168.1.X/cgi-bin/testsap_a ll.cgi根据AP型号,输入胖AP或者瘦AP的ID,点击确定后,AP将写入生产信息并恢复系统默认值,可以看到AP的WLAN灯周期性闪烁(此时请关闭IE),闪烁结束后AP自动重起,操作完成;胖AP:3000: HM-API01-IA 802.11b/g室内单频AP 100MW (S=600)3001: HM-API01-IB 802.11b/g室内AP(500mW) 500MW (S=601)3002: HM-API01-EA 802.11b/g室外AP(500MW) 500MW (S=602)3003: HM-API01-EB 802.11a/b/g回传室外AP(500MW) (S=603)3020: HM-API01-IA2 802.11a/b/g室内双频AP 100MW (S=620)3021: HM-API01-IB2 802.11a/b/g室内AP(500mW) 500MW (S=621)3022: HM-API01-EA2 802.11a/b/g室外AP(500MW) 500MW (S=622)瘦AP:3050: HM-API01-IA-F 802.11b/g室内单频AP 100MW (S=650)3051: HM-API01-IB-F 802.11b/g室内AP(500mW) 500MW (S=651)3052: HM-API01-EA-F 802.11b/g室外AP(500MW) 500MW (S=652)3053: HM-API01-EB-F 802.11a/b/g回传室外AP(500MW) (S=653)3070: HM-API01-IA2-F 802.11a/b/g室内双频AP 100MW (S=670)3071: HM-API01-IB2-F 802.11a/b/g室内AP(500mW) 500MW (S=671)3072: HM-API01-EA2-F 802.11a/b/g室外AP(500MW) 500MW (S=672)3075: HM-API01-EA-F IEEE802.11b/g标准室外AP(100MW) (S=675)3076: HM-API01-EB-F IEEE802.11b/g标准室外AP(500mW) (S=676)3077: HM-API01-EA2-F IEEE802.11a/b/g标准室外AP(100MW) (S=677)3078: HM-API01-EB2-F IEEE802.11a/b/g标准室外AP(500MW) (S=678)5、将瘦AP转换为胖AP后,胖AP默认IP地址为192.168.1.40,登陆地址:ht tps://192.168.1.40,用户名:default 密码default。
弘浩明传WAPI室内无线接入点含口壬曲产口口于册适用于HM-API01-IA-F;HM-API01-IB-F;HM-API-IA2-F;HM-API-IB2-F弘浩明传科技(北京)有限公司2009年5月1.无线局域网产品HM-API01 简介 (4)1.1 弘浩明传无线接入点HM-API01 产品特点 (4)1.2 弘浩明传无线接入点HM-API01 产品组成 (8)1.3 弘浩明传无线接入点HM-API01 产品配置要求 (8)1.4 弘浩明传无线接入点HM-API01 设备外观介绍 (8)1.5 HM-API01 设备安装要求 (9)1.6 HM-API01 硬件安装原则 (9)1.7 HM-API01 设备安装网络连接 (10)1.8 HM-API01 设备安装电源连接 (11)2.设备配置 (13)2.1登录WEB管理 (13)2.2系统登录 (16)3.3基本配置 (19)3.4系统配置 (19)3.4.1系统状态 (19)3.4.2更改帐户 (20)3.4.3系统重启动 (22)3.4.4恢复出厂配置 (23)3.4.5数据备份 (24)3.4.6数据恢复 (26)3.4.7软件升级 (28)3.5系统功能配置 (29)3.5.1MAC地址过滤 (29)3.5.2无线参数配置 (30)3.5.3MSSID-VLAN配置 (31)3.5.4NTP服务器设置 (33)3.6WAPI 配置 (34)3.6.1 认证加密配置 (34)3.6.2 名词解释 (41)3.7 退出系统 (42)3.8 硬件恢复默认设置 (42)3.9 技术参数 (42)附录A : (44)1. 无线局域网产品HM-API01 简介1.1弘浩明传无线接入点HM-API01 产品特点HM-API01是新一代的无线接入点可与采用CAPWA协、议的瘦AP组建构建瘦AP 架构网络,同时亦可单独作为胖AP单独使用,同时可支持MESH&网。
1300 Henley CourtPullman, WA 99163509.334.6306PmodWiFi™ Reference ManualRevised January 7, 2015This manual applies to the PmodWiFi rev. BOverviewThe PmodWiFi is an interface board for the Microchip® MRF24WB0MA Wi-Fi™ radio transceiver module.Features include:∙IEEE 802.11-compliant RF transceiver∙Serialized unique MAC address∙Data rate: 1 and 2Mbps∙IEEE 802.11b/g/n-compatible∙Integrated PCB antenna∙Range: up to 400m (1300 ft.)∙Radio regulation certification for the UnitedStates (FCC), Canada (IC), Europe (ETSI), andJapan (ARIB)∙Wi-Fi certified (WFA ID: WFA7150)The PmodWiFi.1 Functional DescriptionThe PmodWiFi provides IEEE 802.11b/g/n support for embedded applications at data rates of 1 and 2Mbps. It is designed for use with Microchip microcontroller families (PIC18, PIC24, dsPIC33, and PIC32) and the Microchip TCP/IP Stack (a free Microchip Application Libraries download including example applications and source code). The TCP/IP Stack is available at /wireless.1.1 InterfaceThe primary communications interface with the PmodWiFi is an SPI bus. An RST pin provides the host with an active low, asynchronous hardware reset for the PmodWiFi. The PmodWiFi also provides an active low interrupt indicator pin (~INT), which is asserted low by the PmodWifi when data is available for the host device. The ~INT line is de-asserted high after the data transfer is complete. The SPI SCK speed can be up to 25 MHz.PmodWiFi™ Reference ManualInterface connector signal description.The SPI interface standard uses four signal lines. These are slave select (~SS), master out slave in (MOSI), master in slave out (MISO), and serial clock (SCK). These signals map to the following signals on the MRF24WB0MA: ~SS corresponds to the Chip Select signal (~CS), MOSI corresponds to Serial Data Input (SDI), MISO corresponds to Serial Data Output (SDO), and SCK corresponds to the Serial Clock signal (SCK).1.2 Power SupplyThe PmodWiFi is designed to work with Digilent microcontroller boards that have 12-pin header connectors.The PmodWiFi requires a 2.7V-3.6V supply voltage. A 3.3V power supply voltage is available on all Digilent system boards and is provided as part of the 12-wire Pmod interface standard.Digilent system boards with Pmod interface connectors allow jumper selection of the power supply voltage being provided to the Pmod. Ensure that the system board is jumpered to provide 3.3V to the module before applying power to the board.For more information on the MRF24WB0MA, see the MRF24WB0MA datasheet which can be accessed on Microchip's website.。