高立开元MUSE移动应用管家药监手持软件LK9150-用户手册V1.0.3

MUSE-移动应用管家用户利用手册北京高立开元数据软件开发部2014年02月目录1 新客户端安装打开安装包，双击“”，如图1所示：图1.安装启动安装向导，进入“欢迎”界面，如图2所示：图2.欢迎界面点击“下一步”，进入“选择安装文件夹”界面，能够自概念选择安装程序寄放目录，如图3所示：图3.选择安装文件夹点击“下一步”，进入“确认”安装界面，如图4所示：图4.确认安装点击“下一步”，开始安装，安装完成后，会显示“安装完成”，如图5所示：图5.安装完成点击“关闭”按钮，即可完成安装2 启动和更新点击桌面上的图标，即可启动MUSE-移动应用管家，会自动检查是不是更新，如图6所示：图6.检查更新假设是有更新，会自动下载更新文件，进行应用程序的升级，如图7所示：图7.下载更新文件升级完成后，点击“确信”按钮，如图8所示：图8.升级完成第一次使历时会显示“用户信息”窗口，填写用户资料信息，以方便高立开元公司更好地提供效劳。

信息填写完毕后，点击“保留”按钮，如图9所示：图9.填写用户信息即可进入主界面3 主界面系统主界面，界面分为四个区域，别离为应用区、菜单区、资讯区、快捷启动区，如以下图10，以下为各区功能介绍：➢应用区包括应用宝库和应用卸载：●应用宝库——是高立开元公司提供的可供用户下载、安装的全数应用软件列表；应用软件包括桌面应用、手持软件和系统工具，桌面应用为运行在PC机上的应用软件，手持软件为运行在手持机上的应用软件。

提供软件的下载、安装、升级等操作。

●应用卸载——是用户安装好的应用软件列表，提供卸载操作，如下图11➢主菜单区包括应用宝库、应用卸载、设备治理、常规设置、个人资料、官网、论坛、帮忙等功能。

➢资讯区高立开元公司动态资讯➢快捷启动区用户安装完成的桌面应用，需要在此处启动运行。

而且自动将用户桌面上的快捷方式添加到快捷工具栏。

图10.主界面图11.主界面—应用卸载4 应用宝库4.1 桌面应用点击需要安装的桌面应用列表中的“安装”按钮，如图12、13。

产品发布说明书S-P2D9C2T1-024⏹发布标识⏹功能简介本产品用户从GICOM服务端下载、更新桌面应用软件和手持机应用软件；浏览GICOM公司发布新闻；管理从GICOM下载安装的应用软件。

⏹版本特性V1.3.0.0✓新增功能：“设备管理”模块，更改为“注册码管理”✓新增功能：“注册码管理”模块--增加注册码在线查询功能✓新增功能：“注册码管理”模块—增加下载注册码文件到手持机功能✓优化功能：解决IBS服务被防火墙阻止的问题✓优化功能：优化程序操作日志记录机制✓优化功能：优化快捷工具栏加载的快捷方式数量✓修复功能：解决某些情况下由于安装路径选择错误，导致卸载时文件被误删的问题V1.2.0.0✓新增功能：增加“通讯助手”模块，方便用户之间进行业务往来✓新增功能：快捷工具栏✓新增功能：增加“将手持软件安装到SD卡中”功能✓优化功能：美化界面展示效果✓优化功能：改变动态资讯展现方式V1.1.0.0✓优化功能：优化应用升级过程，增加进度提示✓优化功能：优化系统工具下载过程✓修复功能：修复某些环境下应用升级不成功的问题V1.0.9.0✓新增功能：增加版本号和发布时间✓新增功能：增加升级提示✓优化功能：优化设备管理界面✓优化功能：LK9150程序安装过程✓优化功能：桌面应用将“已安装”更改为“打开”，增加打开入口V1.0.8.0✓优化功能：界面美化✓优化功能：WINCE系列手持软件卸载的问题✓新增功能：应用详细信息及应用评分功能V1.0.7.0✓优化功能：将系统托盘双击变更为点击✓优化功能：修正安装包不能正常卸载问题V1.0.6.0✓优化功能：升级功能兼容文件夹方式✓优化功能：本地配置文件兼容老版本✓优化功能：修正开机自启动bugV1.0.4.0✓优化功能：兼容LK系统手持机软件下载✓优化功能：增加系统工具下载✓优化功能：将IBS服务端口号改为不可修改V1.0.3.0✓修正功能：muse客户端程序中设备管理数据库连接问题✓优化功能：将IBS服务默认端口号改为9909V1.0.2.0✓修正功能：应用组件的图标会随着滚轮放大缩小问题✓修正功能：在应用宝库中已安装的应用通过图标进行提示✓修正功能：手持机程序安装优化V1.0.1.0✓修正功能：muse客户端程序自身升级功能✓修正功能：IBS服务在程序第一次启动时自动安装⏹适用领域适用客户：药品生产企业、药品批发企业、第三方物流企业适用设备：Windows XP/ Windows 7/Server 2003/Vista 或以上适用环境：需.Net Framework2.0支持⏹资料清单✓《测试报告》一份。

GD-DV-0711药品（疫苗）电子监管系统手持软件操作说明V1.0.0北京高立开元数据有限公司软件开发部2012年8月修订记录目录1 引言 (1)1.1 标识 (1)1.2 文档概述 (1)2 操作说明 (1)2.1 熟悉设备 (1)2.2 设备启动过程 (1)2.3 设备关闭过程 (1)3 操作流程 (2)3.1 主界面 (2)3.2 参数设置 (2)3.3 登录 (3)3.4 下载文件 (4)3.4.1 下载往来单位 (4)3.4.2 下载药品信息 (5)3.4.3 下载上游企业出库单 (5)3.4.4 下载数据字典 (6)3.5 入库管理 (7)3.5.1 采购入库 (7)3.5.2 退货入库 (8)3.6 出库管理 (10)3.6.1 零售出库 (10)3.6.2 领药出库 (11)3.6.3 供应出库 (12)3.6.4 退货出库 (13)3.6.5 疫苗接种 (14)3.6.6 抽检出库 (15)3.6.7 销毁出库 (16)3.7 单据提交 (17)3.8 设备信息 (18)3.9 退出软件 (19)3.10 相关处理 (19)1 引言1.1 标识1.2 文档概述本文档主要描述中国药品电子监管网客户端软件的手持终端软件的操作说明，包括对参数配置、基本信息文件下载、入库管理、出库管理、单据保存等方面的说明，为用户的操作提供指导。

本文档的预期读者为手持终端软件的使用人员。

2 操作说明2.1 熟悉设备手持设备的特性请参考生产厂商提供的用户说明书。

2.2 设备启动过程手持设备的启动过程请参考生产厂商提供的用户说明书。

2.3 设备关闭过程手持设备的关闭过程请参考生产厂商提供的用户说明书。

3 操作流程3.1 主界面主界面显示手持软件的功能列表：1) 入库管理2) 出库管理3) 下载文件4) 提交单据5) 参数设置6) 设备信息7) 关闭系统参考界面：3.2 参数设置1）打开主界面，点击【参数设置】菜单，打开参数设置界面；2）在参数设置界面设置服务组件的IP地址、端口号；3）在参数设置界面选择需要使用的入库模块和出库模块；4）点击【保存】按钮，保存成功则弹窗提示“参数设置成功”；保存失败则弹出提示“参数设置失败”；5）关闭则跳至主界面。

用户操作说明书一. 前言欢迎使用我们的产品。

本文档将向您提供详细的用户操作说明，以帮助您充分了解并正确使用该产品。

请在使用之前仔细阅读本手册，并按照要求进行操作。

二. 产品介绍本产品是一款功能强大的XXXX（产品名称），它具有以下特点：1. 特点1：XXX2. 特点2：XXX3. 特点3：XXX三. 系统要求在开始使用本产品之前，请确保您的设备符合以下最低系统要求：1. 操作系统：XXX（例如：Windows 7及以上版本，或iOS 10及以上版本）2. 内存：XXX（例如：2GB及以上）3. 存储空间：XXX（例如：至少100MB可用空间）四. 安装与卸载1. 安装步骤：步骤1：XXX步骤2：XXX步骤3：XXX2. 卸载步骤：步骤1：XXX步骤2：XXX步骤3：XXX请注意：在卸载产品前，务必备份您的数据，以免造成数据丢失。

五. 用户登录与注册1. 用户登录：步骤1：打开产品应用程序步骤2：点击“登录”按钮步骤3：输入您的用户名和密码步骤4：点击“登录”按钮，完成用户登录2. 用户注册：步骤1：打开产品应用程序步骤2：点击“注册”按钮步骤3：填写您的个人信息步骤4：点击“注册”按钮，完成用户注册六. 主要功能操作1. 功能1：步骤1：XXX步骤3：XXX 2. 功能2：步骤1：XXX 步骤2：XXX 步骤3：XXX 3. 功能3：步骤1：XXX 步骤2：XXX 步骤3：XXX七. 设置与个性化1. 设置选项：步骤1：XXX 步骤2：XXX2. 个性化操作：步骤1：XXX步骤2：XXX步骤3：XXX八. 常见问题解答在使用过程中，您可能会遇到一些常见问题。

以下是一些常见问题和解答：1. 问题1：XXX解答：XXX2. 问题2：XXX解答：XXX3. 问题3：XXX解答：XXX九. 联系我们如果您在使用过程中遇到了问题或有任何反馈意见，请随时联系我们的客服团队。

我们将竭诚为您提供支持和帮助。

联系方式：电话：XXX-XXXXXXX在线客服：XXX（工作时间：周一至周五，上午9点至下午5点）十. 结束语感谢您使用我们的产品。

User's Guide - English Guía del usuario - EspañolManuel de l’utilisateur - Français Gebruikersgids - DeutschBenutzerhandbuch - Nederlands Guida per l’utente - Italiano Användarhandbok - svenska ユーザーガイド : 日本語用户指南 : 汉语IncludesConstant Force ™TechnologyLX Desk Dual Direct Armwith C-clamp Top MountENGLISHFor the latest User Installation Guide please visit: User's GuideThese symbols alert users of a safety condi-tion that demands attention. All users should be able to recognize and understand the signi fi cance of the following Safety Hazards if encountered on the product or within the documentation. Children who are not able to recognize and respond appropriately to Safety Alerts should not use this product with-out adult supervision!Hazard Symbols ReviewSafetyImportant! You will need to adjust this product after installation is complete. Make sure all your equipment is properly installed on the product before attempting adjustments. This product should move smoothly and easily through the full range of motion and stay where you set it. If movements are too easy or dif fi cult or if product does not stay in desired positions, follow the adjustmentinstructions to create smooth and easy movements. Depending on your product and the adjustment, it may take many turns to notice a difference. Any time equipment is added or removed from thisproduct, resulting in a change in the weight of the mounted load, you should repeat these adjustment steps to ensure safe and optimum operation.Warning:Because mounting surface materials can vary widely, it is imperative that you make sure mounting surface is strong enough to handle mounted product and equipment.Caution:To avoid the potential to pinch cables it is important to follow the cable routing instructions in this manual. Failure to follow these instructions may result in equipment damage or personal injury.WARNING:Stored Energy Hazard: The arm mechanism is under tension and will move up rapidly, on its own, as soon as attached equipment is removed. For this reason, DO NOT remove equipment unless the arm has been moved to the highest position! Failure to follow this instruction may result in serious personal injury and/or equipment damage!CAUTION: DO NOT rotatemonitor past rear edge of desk. Doing so will create an unstable situation and may causeequipment damage or personal injury.0.5”- 1.26”(12.32mm)ENGLISHFeatures & Speci fi cationsCAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY . SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR!ComponentsTools Neededa c f21x3ba4ENGLISHAttach monitors to mounting brackets.Loosely thread thumb screws into mounting brackets.5Slide monitor onto crossbar.ENGLISH94xNOTE: Leave enough slack in cable to allow full range of motion.Caution: To avoid the potential to pinch cables it is important to follow the cable routing instructions in this manual. Failure to follow these instructions may result in equipment damage or personal injury.10ENGLISHAdjustment Stepproperly installed on the product before attempting adjustments. This product should move smoothly and easily through the full range of motion and stay where you set it. If movements are too easy or dif fi cult or if product does not stay in desired positions, follow the adjustment instructions to create smooth and easy movements. Depending on your product and the adjustment, it may take many turns to notice a difference. Any timeequipment is added or removed from this product, resulting in a change in the weight of the mounted load, you should repeat these adjustment steps to ensure safe and optimum operation.Increase Lift StrengthIf the mounted weight is too heavy or this product does not stay up when raised, then you'll need to increase Lift Strength:Decrease Lift StrengthIf the mounted weight is too light or this product does not stay down when lowered, then you'll need to decrease Lift Strength:Lift - Up and DowncENGLISHdArm Swing – Side-to-sideCAUTION: DO NOT remove screw. Removing screw may cause damage to equipment.© 2017 Ergotron, Inc. All rights reserved.ENGLISHFor local customer care phone numbers visit: For Service visit: For Warranty visit: /warranty NOTE: When contacting customer service, reference the serial number.Learn more about ergonomic computer use at:Set Your Workstation to Work For YOU!Height Position top of screen slightly below eye level.Position keyboard at about elbow height with wrists fl at.Distance Position screen an arm's length from face—at least 20” (508mm).Position keyboard close enough to create a 90˚ angle in elbow. Angle Tilt screen to eliminate glare.Tilt the keyboard back 10° so that your wrists remain fl at.To Reduce FatigueBreathe - Breathe deeply through your nose.Blink - Blink often to avoid dry eyes.Break • 2 to 3 minutes every 20 minutes• 15 to 20 minutes every 2 hours.。

Deleting all A-12 Technical A-12 Battery A-13 A-13 A-13 General declaration of A-13U SAcontrol lightbutton Pv UP buttonySTOP buttonb DOWN buttonBatterycompartment Labelling fieldThis equipment has been tested and found to comply with the limits for a class B digital device,pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.Thisequipment generates,uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.Operation with non-approved equipment is likely to result ininterference to radio and TV reception.The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user's authority to operate this equipment.U SANote:Radio stations transmitting in the same frequency rangemay cause reception interference.Please note that the operating range of the radio signal is limited by legislation as well as by the product design.Wall holder installation• Before installing the wall holder,always ensure that the transmitter and receiver are in proper working order.• Mount the holder onto the wall using the two raw plugs and screws provided.General informationThe MonoTel-915 handheld transmitter can be used to operate one or more receivers.The MonoTel-915 device is characterised by its user-friendly operation.Designated useThe MonoTel-915 may be used to operate roller shutters/sun protection systems only .• Please note that radio-controlled systems may not be used in areas with a high risk of interference (e.g.hospitals,airports).• The remote control is intended solely for use with equipment and systems in which malfunctions in the handheldtransmitter or receiver would not pose any risk to persons,animals or property or which contain safety devices to eliminate such risks.• The operator is not protected from interference from other telecommunications systems and terminal equipment(e.g.even from radio-controlled systems which are properly operated in the same frequency range).• Radio receivers may only be used in combination with equipment and systems stipulated in manufacturers’specifications.U S AProgramming transmitter/channelPrerequisite:The receiver must be installed.1.With pre-installed electric receivers,the fuse must be disconnec-ted and reconnected after a few seconds.The receiver will remain in programming mode for approximately 5 minutes.2.Position yourself in front of the roller shutter/awning/blind with the remote control in your hand.3.Open the front cover of the device and press the transmitter pro-gramming button P briefly .The shutter/awning/blind will start to move up and down.This will happen for approximately 2 minutes.4.To define the keyboard layout,press the UP button on thetransmitter as soon as the shutter/awning/blind begins to move upwards (after approx.1 second).The shutter/awning/blind will come to a halt briefly.As soon as the shutter/awning/blind begins to move again,press the DOWN button on the handheld transmitter.The shutter/awning/blind will come to a stop.The transmitter or this channel has been successfully programmed.Programming additional transmittersTo programme additional transmitters in one receiver,please proceed as follows:1.Press the UP,DOWN and programming button P on a transmitter that has already been programmed in the receiver until the LED goes out.2.To define the keyboard layout,press the UP button on the hand-held transmitter as soon as the shutter/awning/blind begins to move upwards (after approx.1 second).The shutter/awning/blind will come to a halt briefly.As soon as the shutter/awning/blind begins to move again,press the DOWN button on the handheld transmitter.The shutter/awning/blind will come to a stop.The transmitter or this channel has been successfully programmed.Transmission control lightThe transmission control light is illuminated when a radio signal is being transmitted.The transmission control light will flash during transmission if battery power is low.The transmission power or radio operating range will decrease as battery power decreases.If the transmission control light does not light up when the buttons are pressed,the batteries must be replaced.Group controlGroup control refers to the operation of one or more receivers at the same time.The group selected is controlled via a control command.The MonoTel-915 has one radio channel which is used for group control.Note:The inlay card located below the transparent cover canbe used to make a note of the group which has been programmed.position,press the STOP button in addition.The curtain/canopy/blind will come to a stop.The intermediate position has been successfully programmed. Programming Pos VPrerequisite:The transmitter has been programmed and the end limit positions have been set.The curtain/canopy/blind is in the lower end limit position.1.Move the curtain/canopy/blind in the UP direction using the handheld transmitter until the ventilation slits are open or the reverse position has been reached.Note:Keep the UP button pressed until the desired position is reached.2.When the curtain/canopy/blind has reached the desired position,press the STOP button in addition.The curtain/canopy/blind will come to a stop.The venti-lation/reverse position has been successfully programmed.U S ADeleting individual transmittersDisconnect the fuse – and reconnect after a few seconds.1.Open the front cover on the device and press the following buttons simultaneously :• Programming button P • STOP button2.Keep these two buttons pressed until the LED goes out briefly.Deleting all transmittersDisconnect the fuse – and reconnect after a few seconds.1.Open the front cover on the device and press the following buttons simultaneously :• Programming button P • UP button • STOP button • DOWN button2.Keep these buttons pressed until the LED flashes 3 times.Technical data Operating voltage 3 V DC Battery requirements 2 x LR 03 (AAA)System of protectionIP 20Permissible ambient temperature –10 to +55 °C Operating frequency 915,3 MHz Dimensions in mmL 121 x W 43 x H 23The maximum radio range is 25 m indoors and 350 m outdoors.Adjustment to Pos BPrerequisite:The transmitter has been programmed.1.Press the UP button twice in quick succession .2.The drive will adjust the curtain/canopy/blind into the stored intermediate position.If no intermediate position is stored,the curtain/canopy/blind is automatically adjusted into the lower limit position.Adjustment to Pos V (roller shutter,awning)Prerequisite:The transmitter has been programmed.1.Press the UP button twice in quick succession .2.The curtain/canopy is adjusted into the stored ventilationposition.If no ventilation position is stored,the curtain/canopy is automatically adjusted into the upper limit position.Adjustment to Pos V (venetian blind)Prerequisite:The transmitter has been programmed.1.Press the UP button twice in quick succession .2.The blind is adjusted into the stored reverse position.If no reverse position is stored,the blind is automatically adjusted into the lower limit position.Deleting Pos B1.Press the following buttons simultaneously :• DOWN button • STOP button2.Keep these two buttons pressed until the LED goes out briefly.Deleting Pos V1.Press the following buttons simultaneously :• UP button • STOP button2.Keep these two buttons pressed until the LED goes out briefly.WarnhinweiseU S ABattery replacement1.Open the battery compartment.2.Remove the batteries.3.Insert the new batteries properly .CleaningClean the device with a damp cloth only.Do not use a cleansing agent as doing so may damage the plastic.TroubleshootingGeneral declaration of conformity:The company elero GmbH hereby declares that the MonoTel-915handheld transmitter complies with the basic requirements and other relevant regulations of the EC Directive 1999/5/EG.。

移动应用操作手册用户手册1. 介绍欢迎使用移动应用（以下简称“应用”）。

本手册旨在为用户提供详尽的操作指南，以便用户能够熟练地操作应用并充分利用其功能。

2. 下载与安装在使用本应用前，您需要从应用商店（Google Play或App Store）下载并安装应用。

请按照下列步骤进行操作：2.1 打开应用商店2.2 搜索应用名称2.3 点击下载按钮2.4 等待下载完成2.5 点击安装按钮2.6 等待安装完成2.7 点击打开按钮3. 注册与登录在第一次打开应用时，您需要注册一个帐户以获得完整的应用功能。

请按照下列步骤进行注册和登录：3.1 点击“注册”按钮3.2 填写必要的个人信息（用户名、密码、电子邮箱等）3.3 点击“注册”按钮完成注册3.4 返回登录页面3.5 输入您的用户名和密码3.6 点击“登录”按钮4. 应用界面应用界面主要包括以下几个部分：4.1 导航栏：位于屏幕底部或顶部，用于切换不同的功能页面。

4.2 功能区：位于主屏幕中央，显示您常用的功能快捷方式。

4.3 个人资料：位于侧边栏或底部导航栏中，显示您的个人信息和设置选项。

4.4 内容区：位于主屏幕下方或侧边栏中，用于展示具体的内容或功能页面。

5. 常用功能5.1 浏览内容：点击应用主屏幕上的相应模块，浏览您感兴趣的内容。

5.2 搜索功能：点击导航栏上的搜索图标，输入关键词搜索相关内容。

5.3 上传文件：点击功能区中的“上传”按钮，选择要上传的文件并进行操作。

5.4 下载文件：在内容区或功能页面中找到需要下载的文件，点击下载按钮并选择下载路径。

5.5 发布内容：点击导航栏上的“发布”按钮，在弹出的界面中填写相关信息并发布您的内容。

6. 高级功能6.1 设置项：点击个人资料中的“设置”选项，可以修改个人信息、隐私设置等。

6.2 个性化设置：根据个人喜好，设置应用的主题、字体大小等显示效果。

6.3 多语言支持：根据您的需求，选择应用提供的多种语言进行显示。

知从木牛基础软件OBD产品手册知从®木牛基础软件平台知从木牛基础软件OBD产品手册知从®木牛基础软件平台1功能概述知从木牛基础软件平台（ ZC.MuNiu ）为汽车电子控制器产品开发，提供完整的基础软件平台解决方案。

该产品参考AUTOSAR、OSEK等国际规范。

有基于AUTOSAR ARTOP架构的上位机配置工具，支持上汽、一汽、吉利、广汽、长安、长城等整车厂通讯、诊断、网络管理规范。

知从木牛基础软件平台，主要包括：操作系统、通讯协议栈（CAN\ LIN）、诊断协议栈(UDS\OBD\J1939)、网络管理（OSEK\AUTOSAR）、标定协议栈（XCP\CCP）、存储协议栈、加密模块（CRYPTO）、复杂驱动等模块，配套知从的Bootloader刷新程序和上位机工具，可以根据不同的客户项目要求进行配置和再开发。

知从科技提供基础软件产品的同时，也提供控制器基础软件功能实现的开发服务。

OBD系统（On-Board Diagnostics System）是一种车辆故障检测和诊断系统，用于监测和报告车辆排放控制系统的故障和性能。

它可以通过使用车载电脑监测车辆在实际使用时排放系统的工作状况，并能监测排放系统的故障，通过点亮故障指示器(MIL)通知车辆驾驶员出现故障，同时存储故障代码识别所监测到的故障。

ISO_15031-5_2016和GB18352.6-2016规定了OBD系统在车辆排放控制方面的具体要求和指导。

2应用领域汽车OBD（On-Board Diagnostics）是车辆上的诊断系统，用于监测和报告车辆排放控制系统的故障和性能。

OBD产品广泛应用于以下领域：发动机管理系统（EMS）变速器控制器（TCU）制动控制器（BCU）电机控制器（MCU）电子驻车系统（EPB）电池管理系统控制器（BMS）…3配置环境Hardware (Chip) Aurix TC387Compilers Supported Tasking V6.3r1Evaluation Hardware TC387QPDebugger (SW) TRACE32 PowerView for TriCore V2020.02 Debugger (HW) PowerDebug PRO Ethernet(劳特巴赫) V3.0 Configuration Tools ZCMuNiu4.4_03ENZST01000101Configuration Environment Win7/Win10 64bitTasking编译选项-Ctc38x --lsl-core=vtc -t -I"D:\ENZST01\Bsw04_387\prj" -Wa-H"sfr/regtc38x.def" -Wa-gAHLs --emit-locals=-equs,-symbols -Wa-Ogs -Wa--error-limit=42--iso=99 --language=-gcc,-volatile,+strings,-kanji --fp-model=3 --switch=auto --align=0 --default-near-size=0 --default-a0-size=0 --default-a1-size=0 -O2 --tradeoff=0 --compact-max-size=200 -g --error-limit=42 --sourceTasking链接选项-Ctc38x --lsl-core=vtc -t -I"D:\ENZST01\Bsw04_387\prj" -Wl-o"${PROJ}.hex":IHEX:4 --hex-format=s "..\0_Code\5_lsl\user.lsl" -Wl-OtxycL -Wl--map-file="${PROJ}.mapxml":XML -Wl-mcrfiklSmNOduQ -Wl--error-limit=42 -g --fp-model=3 --c++=034开发背景AUTOSAR组织成立于2003年，主要由欧洲汽车制造商、部件供应商及其他电子、半导体和软件系统公司联合建立。

产品说明书1. 产品概述本产品是一款具有多功能的智能设备，通过与手机、电脑等设备连接，可以实现多种应用。

该产品集合了日常生活中常用的功能，包括智能助手、健康管理、娱乐等，为用户带来便利和乐趣。

2. 产品特点2.1 智能助手功能该产品配备了智能语音助手功能，支持语音识别、语音控制等。

用户可以通过语音指令，实现打电话、发短信、查询天气、设定闹钟等功能，极大地方便了用户的操作。

2.2 健康管理功能产品内置健康管理系统，可以实时监测用户的运动情况、心率、睡眠质量等。

通过手机APP，用户可以查看自己的健康数据，并进行分析和记录，帮助用户建立健康生活习惯。

2.3 娱乐功能产品支持多种娱乐功能，包括音乐播放、视频播放、游戏等。

用户可以通过手机或电脑将自己喜欢的音乐、视频传输到设备上进行播放，也可以下载各类应用程序进行游戏娱乐。

2.4 高清显示屏产品配备了一块高清显示屏，具有优良的显示效果和显示效果。

用户可以清晰地查看各类信息，并进行操作和控制。

3. 技术规格3.1 硬件规格•处理器：XXX•存储容量：XXX•显示屏尺寸：XXX•电池容量：XXX•连接接口：XXX•其他：XXX3.2 软件规格•操作系统：XXX•支持的应用程序：XXX•其他：XXX4. 使用说明4.1 连接设备使用本产品需要将其与手机或电脑等设备进行连接。

具体操作如下：1.打开本产品的蓝牙功能。

2.打开手机或电脑的蓝牙功能。

3.在手机或电脑上搜索并配对本产品。

4.2 使用智能助手功能使用智能助手功能可以通过语音指令来控制设备。

具体操作如下：1.唤醒设备的语音助手功能，可以通过说出设备的唤醒词来实现。

2.说出相应的语音指令，例如“打电话给XXX”、“查询天气”等。

4.3 使用健康管理功能使用健康管理功能可以实时监测并记录用户的健康数据。

具体操作如下：1.下载并安装手机APP。

2.打开APP并登录账号。

3.将设备与APP进行连接。

4.在APP上查看健康数据，并进行分析和记录。