下载文档原格式
® Metal Gasket Face Seal Fittings■1/16 to 1 in. and 6 to 18 mm sizes■ High-purity stainless steels■ The original design, the authentic VCR brand2 VCR Metal Gasket Face Seal FittingsWelded AssembliesMale NPT Connector . . . . . . . . . . . . . 13Female NPT Connector . . . . . . . . . . . 13Swagelok Tube Fitting Connector . . . 13Rotating Female Union . . . . . . . . . . . 13Nuts, Caps, and Plugs . . . . . . . . . . 14High-Flow Connections—“H” Type VCR Glands . . . . . . . . . . . . . . . . . . . . . . . . 15Bodies . . . . . . . . . . . . . . . . . . . . . . . . . 15Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . 16Gaskets . . . . . . . . . . . . . . . . . . . . . . . 17Options and AccessoriesFlow Restrictors . . . . . . . . . . . . . . . . . 18Lock and Tag Devices . . . . . . . . . . . . 18Side-Load InstallationTool and Tray . . . . . . . . . . . . . . . . . . . 18Installation Instructions . . . . . . . . .19ContentsTypical VCR Assemblies . . . . . . . . . . 2Features . . . . . . . . . . . . . . . . . . . . . . . 3Materials of Construction . . . . . . . . . . 3Pressure Ratings . . . . . . . . . . . . . . . . 3Temperature Ratings . . . . . . . . . . . . . 3Testing . . . . . . . . . . . . . . . . . . . . . . . . 3Cleaning . . . . . . . . . . . . . . . . . . . . . . . 4Ultrahigh-Purity Processing . . . . . . . . 4Ordering Information,Pressure Ratings, and Dimensions . . 4GlandsTube Butt Weld . . . . . . . . . . . . . . . . . . 4Socket Weld . . . . . . . . . . . . . . . . . . . . 6Male Weld . . . . . . . . . . . . . . . . . . . . . . 7Tube Adapter . . . . . . . . . . . . . . . . . . . 7Blind . . . . . . . . . . . . . . . . . . . . . . . . . . 7BodiesMale Connectors . . . . . . . . . . . . . . . . 8Female Connector . . . . . . . . . . . . . . . 9Swagelok Tube Fitting Connector . . . 9Male Unions . . . . . . . . . . . . . . . . . . . . 10Tube Butt WeldBulkhead Connector . . . . . . . . . . . . . 10Coupling . . . . . . . . . . . . . . . . . . . . . . . 11Reducers . . . . . . . . . . . . . . . . . . . . . . 11Elbows, Tee, Cross . . . . . . . . . . . . . . .11VCR Metal Gasket Face Seal Fittings 3Test port at two locations foreasy leak testingStandard surface fi nish onglands and bodies is a roughness average of 10 μin. (0.25 μm) R aMaterial heat code is stamped on glands and all shapes to ensure raw material traceabilityPrecision manufactured gasketfor maximum performanceFemale threads are silver plated to prevent galling, ensure easy,consistent assemblyNo “virtual leak” zonesSide-load retainer gasket for easy installation and minimalclearance for removalMarkings identify manufacturer, material, and when applicable, the appropriate process designator, in accordancewith Swagelok Ultrahigh-Purity Process Specifi cation (SC-01), MS-06-61F eatures Swagelok ® VCR fi ttings offer the high purity of a metal-to-metal seal, providing leak-tight service from vacuum topositive pressure.The seal on a VCR assembly is made when the gasket is compressed by two beads during the engagement of a male nut or body hex and a female nut.P ressure Ratings■ All ratings comply with calculations in accordance withASME Code for Pressure Piping B31.3, Process Piping.■ To determine pressure ratings in accordance with ASMEB31.1, Power Piping, multiply psig rating by 0.94.■ Working pressure ratings determined at room temperature with gasket materials shown.PlatingVCR female nuts are silver plated. Avoid chemical processesused for cleaning, electropolishing, and passivation that will remove plating. If the plating is damaged or removed, thread galling may occur, damaging fi tting components and preventing a proper seal.M aterials of ConstructionT emperature RatingsT esting The VCR fi tting design has been helium leak tested to a maximum leak rate of 4 ϫ 10–9 std cm 3/s with silver-plated and copper gaskets and to a maximum leak rate of 4 ϫ 10–11 std cm 3/s with unplated gaskets.4 VCR Metal Gasket Face Seal FittingsO rdering Information, Pressure Ratings, and Dimensions ■ Dimensions are for reference only and are subject to change.■ The E dimension refers to the smallest nominal inside diameter of the part.■ To order fi ttings manufactured in accordance with Swagelok Ultrahigh-Purity Process Specifi cation (SC-01), MS-06-61,add P to the ordering number.Example: 6LV-4-VCR-3-4TB7PGlandsShort T ube Butt Weld➀ Not designed for gasket retainer assembly.U ltrahigh-Purity Processing A variety of VCR face seal glands and bodies is available with controlled surface fi nishes, electropolished, and specially cleaned to meet ultrahigh-purity systemrequirements. For more information, see Swagelok Ultrahigh-Purity Process Specifi cation (SC-01), MS-06-61.C leaning Components are cleaned to remove oil, grease, and loose particles. For more information, see Swagelok Standard Cleaning and Packaging (SC-10), MS-06-62.VCR Metal Gasket Face Seal Fittings 5Short Automatic Tube Butt Weld➀Not designed for gasket retainer assembly.➁ May contain internal diameter transitions.Long Tube Butt WeldGlands6 VCR Metal Gasket Face Seal FittingsLong Automatic Tube Butt Weld➀ Uses 1/8 in. gasket and nut.➁ Not designed for gasket retainer assembly.➂ Uses 1/2 in. gasket and nut.Socket WeldShort Socket WeldGlandsVCR Metal Gasket Face Seal Fittings 7GlandsBlind (Undrilled) Gland➀ Not designed for gasket retainer assembly. Male Weld➀ Not designed for gasket retainer assembly.➁ May contain internal diameter transitions.Reducing Socket Weld➀May contain internal diameter transitions.➀ May contain internal diameter transitions. T ube Adapter8 VCR Metal Gasket Face Seal FittingsMale NPT C onnector ➀BodiesSelect male connectors are available with ISO/BSP tapered thread (RT) ends. Contact your authorized Swagelok representative.➀ VCR components with fixed threads must remain stationary during installation. These fitting connections should be assembled only to glands with rotating male or female threaded nuts.➁ Not designed for gasket retainer assembly.➂ May contain internal diameter transitions.Male NPT Bulkhead Connector➀➀ VCR components with fixed threads must remain stationary during installation. These fitting connections should be assembled only to glands with rotating male orfemale threaded nuts.Straight Thread O-Ring Seal Male Connector➀➀ VCR components with fixed threads must remain stationary during installation. These fitting connections should be assembled only toglands with rotating male or female threaded nuts.➁ Fluorocarbon FKM is standard, other materials are available. O-rings are assembled with a silicone vacuum grease.VCR Metal Gasket Face Seal Fittings 9BodiesS wagelok Tube Fitting Connector ➀Dimensions A, C, and D are typical finger-tight. Swagelok nuts and ferrules are provided assembled, as shown.For tubing maximum pressure ratings for use with Swagelok tube fittings, see Swagelok Tubing Data , MS-01-107.➀ VCR components with fixed threads must remain stationary during installation. These fitting connections should be assembled only to glands with rotating male or female threaded nuts.➁ May contain internal diameter transitions.Female NPT Connector➀➀ VCR components with fixed threads must remain stationary during installation. These fittingconnections should be assembled only to glands with rotating male or female threaded nuts.➁ Not designed for gasket retainer assembly.Dimensions A, C, and D are typical finger-tight. Swagelok nuts and ferrules are provided assembled, as shown.For tubing maximum pressure ratings for use with Swagelok tube fittings, see Swagelok Tubing Data , MS-01-107.➀ VCR components with fixed threads must remain stationary during installation. These fitting connections should be assembled only to glands with rotating male or female threaded nuts.Swagelok Tube Fitting Bulkhead Connector ➀10 VCR Metal Gasket Face Seal Fittings➀ VCR components with fixed threads must remain stationary during installation. These fitting connections should beassembled only to glands with rotating male or female threaded nuts.Male Bulkhead Union➀M ale Union➀➀ VCR components with fixed threads must remain stationary during installation. Thesefitting connections should be assembled only to glands with rotating male or female threaded nuts.➁Not designed for gasket retainer assembly.Male Reducing Union➀➀ VCR components with fixed threads must remain stationary during installation. These fitting connectionsshould be assembled only to glands with rotating male or female threaded nuts.➁ Not designed for gasket retainer assembly.T ube Butt Weld Bulkhead Connector ➀➀ VCR components with fixed threads must remain stationary during normal installation. These fitting connections should be assembled only to glands withrotating male or female threaded nuts.BodiesVCR Metal Gasket Face Seal Fittings 11CouplingBodiesF emale Reducing Union➀➀ VCR components with fixed threads must remain stationary during normal installation. These fittingconnections should be assembled only to glands with rotating male or female threaded nuts.Reducing Adapter➀➀ VCR components with fixed threads must remain stationary during normal installation. These fittingconnections should be assembled only to glands with rotating male or female threaded nuts.➁Not designed for gasket retainer assembly.Reducing Bushing➀➀ VCR components with fixed threads must remain stationary during normal installation. These fittingconnections should be assembled only to glands with rotating male or female threaded nuts.Male NPT E lbow➀➀ VCR components with fixed threads must remain stationary during normal installation. These fittingconnections should be assembled only to glands with rotating male or female threaded nuts.12 VCR Metal Gasket Face Seal Fittings➀ VCR components with fixed threads must remain stationary during normalinstallation. These fitting connections should be assembled only to glands with rotating male or female threaded nuts.➁ Not designed for gasket retainer assembly.Union Elbow➀Union Tee➀➀ VCR components with fixed threads must remain stationary during normal installation.These fitting connections should be assembled only to glands with rotating male or female threaded nuts.➁ Not designed for gasket retainer assembly.Union Cross➀➀ VCR components with fixed threads must remain stationary during normal installation. Thesefitting connections should be assembled only to glands with rotating male or female threaded nuts.➁ Not designed for gasket retainer assembly.BodiesVCR Metal Gasket Face Seal Fittings 13WeldedAssembliesFemale ElbowFemale TeeElbows, crosses, Micro-Fit ® fi ttings, and tees are available with welded male and female ends.For more information, contact your authorized Swagelok sales and servicerepresentative.Leak testLeak testLeak testOrdering number:6LV-4-WVCR-T-FFFOrdering number:6LV-4-WVCR-9-DFMale NPT ConnectorFemale NPT Connector Dimensions A, C, and D are typical finger-tight.Swagelok nuts and ferrules are provided assembled, as shown.For tubing maximum pressure ratings for use with Swagelok tube fittings, see Swagelok Tubing Data , MS-01-107.Swagelok Tube Fitting ConnectorRotating Female Union14 VCR Metal Gasket Face Seal FittingsN uts, Caps, and Plugs Cap with LanyardLanyard material is 302 SS. Lanyard length is 6 in. (15.2 cm).Male Nut➀ A taper at the hex end allows the nut to movearound 90° tube bends.Protective CapMade of 304 stainlesssteel and supplied asbead protection duringshipping for a varietyof VCR face seal fittingsprocessed to SwagelokUltrahigh-Purity ProcessSpecifi cation (SC-01),MS-06-61.CapShort Male NutFor use with short gland.Female Nut➀ Not designed for gasket retainerassembly.➁ Also available as a rotatable plug.Ordering number: SS-4-VCR-RPPlugPlug with LanyardLanyard material is 302 SS.Lanyard length is 6 in. (15.2 cm).F flatVCR Metal Gasket Face Seal Fittings 15High-Flow Connections—“H” Type VCR“H” Type VCR connections are compatible with 1/4 in. VCR connections and are designed foruse with Swagelok high-fl ow diaphragm valves and gas regulators. For uniform fl ow, use 1/4 in.side-load retainer style gasket. See page 17.Nuts, Caps,and PlugsSplit-Nut AssembliesFemaleMaleG landsTube Butt WeldB odiesTube Butt WeldAutomatic Tube Weld16 VCR Metal Gasket Face Seal FittingsBulkhead ConnectorBodiesN utsFemaleMaleUnion TeeUnion ElbowHigh-Flow Connections—“H” Type VCRVCR Metal Gasket Face Seal Fittings 17G askets Ordering InformationSpecify gasket material by adding a material designator tothe basic ordering number.Nickel and copper gasket retainer assemblies use a 316 stainless steel retainer.➀ Copper gaskets are unplated. However, to order, add CU to a basic ordering number for silver-plated gaskets. Example: CU -4-VCR-2. Side-load retainer style gaskets are not available in copper.Gasket Retainer AssemblyRetainer and gasket must be used as an assembly.Unplated (VS)NonretainedGasket Retainer AssemblySilver PlatedNonretainedCannot be used in a gasket retainerassembly.OptionsBlind GasketsBlind (undrilled) gaskets are available in nonretained andretainer assembly styles. Blind gaskets have a maximum differential pressure rating (⌬p ) of 100 psi (6.8 bar).To order, add -BL to a basic ordering number. Example: SS-4-VCR-2-VS -BLSnubber GasketsSnubber gaskets in 0.5 to 60 μm sizes for 1/4 through 1 in. VCR fi ttings are available. Contact your authorized Swagelok representative for more information.Side-Load18 VCR Metal Gasket Face Seal FittingsFitting Lock DeviceThis device is intended for use on Swagelok VCR metal gasket face seal assemblies with standard male and female nuts.L ock and Tag Devices These devices help prevent unintentional disassembly of VCR connections. Additionally, both devices include a wire hole to allow for a tag to support identifi cation and quality verification programs.Fitting Lock Device for ValvesThis device is intended for use on Swagelok valves with integrally machined male VCR metal gasket face seal endconnections.Tool■ Makes gasket handling easy,preserves cleanliness■ E nables gasket installationwhere space is limited■ Is used to easily remove gasketfrom storage tray Material:Polyethersulfone (PES)S ide-Load Installation Tool and Tray Tray (includes 30 gaskets)■ Keeps gaskets secure■ K eeps gaskets aligned for easyremoval with side-load gasket tool■ Cleaned and packaged inaccordance with SwagelokUltrahigh-Purity Process Specifi cation (SC-01),MS-06-61Material:Tray—polypropyleneF low Restrictors This product can be used in liquid or gas delivery systems where repeatable fl ow reduction orlimiting is required.■ One piece,compact design saves space■ Standard orifi ce sizes drilled througha 1/4 in. male VCR union■ No dead volume for clean operation ■ Identifi cation of orifi ce and heat codemarked clearly on the body■ Electropolished, cleaned, andpackaged in accordance withSwagelok Ultrahigh-Purity Process Specifi cation (SC-01), MS-06-61■ Working pressure 10 000 psig(689 bar)Ordering Information and DimensionsVCR components with fixed threads must remain stationary during normal installation. These fitting connections should be assembled only to glands with rotating female nuts.VCR Metal Gasket Face Seal Fittings 19 V CR Fitting Installation Instructions5c5bWarranty InformationSwagelok products are backed by The Swagelok Limited Lifetime Warranty. For a copy, visit or contact your authorized Swagelok representative.Swagelok, VCR, Micro-Fit—TM Swagelok Company © 2007 Swagelok Company Printed in U.S.A., MI July 2007, R 8MS-01-24Safe Product SelectionWhen selecting a product, the total system design must be considered to ensure safe, trouble-free performance. Function, material compatibility, adequate ratings,proper installation, operation, and maintenance are the responsibilities of the system designer and user.VCR Split-Nut Installation InstructionsMaleFemaleSwagelok Orbital Welding SystemFor information on the Swagelok welding system, see the Swagelok Orbital Welding System Quick Reference Guide , MS-02-143.。
SGD 10026FP 104401.4 软管及软管总成的储存和使用寿命制造软管的橡胶会有老化现象，因此对它们的存储和使用寿命都有限制要求。
存储不当或处理不正确都会改变橡胶产品的物理性能，从而缩短产品使用寿命，过度硬化、软化以及永久变形，裂缝或其他表面损坏，都会使产品失效。
而引起这些变化的因素有氧气，臭氧，热，光，潮湿，溶剂或在压力下存储。
如果存储和处理恰当，橡胶产品在很长时间内（比如几年内）都不会改变性能，然而，这不适用于非硫化橡胶。
下面是一些存储要求。
• 储存室: 保持阴凉，干燥，无灰尘和适度通风。
即使采取防护天气的措施，也不允许存放于室外。
• 温度: 橡胶弹性体产品的储存温度取决于弹性体的类型。
常规橡胶产品应该储存在从-10℃到+15℃的温度范围内，上限为25℃，高于此温度只能作为临时存储。
采用氯丁橡胶CR 的产品要求不低于+12℃的储存温度。
非硫化橡胶产品和混合物要求+15℃到+25℃的存储温度。
较高的温度和较低的温度都应该避免。
在运输或储存时承受过低温度的产品可能会变硬或失去粘着力，这些产品在使用或进一步加工之前，需要在20°C 或更高温度放置一段时间，这最好是在拆开包装之前进行，避免水蒸汽积聚在产品上。
• 室内加热: 橡胶产品必须和热源隔离，热源同存储产品至少要有1米距离，对热空气加热则要求更大的距离。
• 湿度: 避免储存在潮湿的环境中，必须要避免冷凝现象，湿度要低于65%。
• 照明: 建议使用标准的白炽电灯泡，产品应该远离光照射，尤其是直射太阳光和带紫外线的强人工照明。
储存室的窗户应该有红色或黄色的涂层保护，绝对不能使用蓝色。
• 臭氧和氧气产品储存要避免气体流动的地方，尤其是通风口，必须要包装后储存在密闭空间或箱子里。
由于臭氧对橡胶材料非常有害，储存室不能有任何产生臭氧的设备，比如电机以及其他产生电火或放电的设备。
燃烧的气体和蒸汽通过化学反应也会产生臭氧，也要避免。
请注意:电弧焊会产生高浓度臭氧，因此焊接时必须要保证彻底的通风，软管存储点要尽可能远离焊接作业区域。
这里介绍的单卡套接头有两个体系,一类又称为24度压缩式管接头,常用于液压管道系统，设计制造标准包括DIN2353/ISO8434-1，JIS B2351，SAE J514。
另一类通常由仪表管接头的生产商提供，没有统一的制造标准，如CPI接头，ONE-LOK接头等。
常用的单卡套接头有单刃口卡套接头和双刃口卡套接头之分。
一.单刃口卡套接头结构如下：单刃口卡套接头的动作原理：管子插入接头并保证与接头底部（2）接触，卡套右端在螺母的拧紧顶压下，左端被挤进接头体内锥孔与管子间的间隙里，使卡套的外锥面形成锥面接触密封，卡套的内刃口（1）嵌入钢管外壁，在钢管的外壁压出一个闭口环形槽和一个环形凸起（4），形成密封；进一步拧紧螺母，使卡套中部稍微凸起，产生弹性变形，弹性应力使卡套右端面与螺母锥面产生摩擦力，以防螺母松动，弹性变形部分可吸收液压管道中的震动，另外，卡套尾部（3）也紧抱钢管形成一道抵触密封。
二.双刃口卡套接头结构如下：双刃口卡套接头用两个刃口卡套，即一个切入刃口（1）和一个止动刃口（2），止动刃口不仅形成了第二道密封，而且可防止切入刃口咬伤管子，从而提高了接头的耐振能力、抗脱拔能力。
卡套密封多为金属对金属的密封形式，为了提高卡套接头的密封性和重复安装性，现在有了带有弹性密封圈的卡套，见下图。
以弹性密封取代传统卡套接头采用的硬密封方式，密封效果更加理想，复装性更佳。
双卡套接头发布日期：[2010-3-28 7:14:30] 点击数：[163]双卡套接头,也叫双卡套管接头,双卡套终端接头,采用双卡环密封结构,双卡套更有利于跟钢管的密封主要规格有,3MM,4MM,6MM,8MM,10MM,12MM,14MM,16MM,18MM,22MM,25MM,28MM,30MM材质主要用:SS304,SS316,黄铜主要标准有:GB/T3733.1-1983,GB/T3734.1-1983,GB/T3736.1-1983,GB/T3738.1-1983,GB/T3740.1-1983,GB/T3741.1-1983,GB/T3743.1-1983,GB/ T3745.1-1983,GB/T3746.1-1983,GB/T3747.1-1983,GB/T3748.1-1983,GB/T3749.1-1983,GB/T3751.1-1983,GB/T3753.1-1983,GB/T3754.1-1983,GB/T3755.1-1983,GB/T3757.1-1983,卡套接头概述卡套式管接头由四部分组成：接头体、前卡套、后卡套、螺母。
Liquidtight fittingsOur liquidtight product line offers high quality, high performance fittings. Designed to the toughest standards and integrating the latesttechnology, not only do you get a reliable and durable product, you also get one that reduces installation time and cost. Our versatile lines of liquidtight fittings are designed for a wide range of industrial, commercial and residential applications. Choose from our Liquidator ™, LiQuik ™, zinc die cast, non-metallic or low profile liquidtight fittings.Liquidtight fittings selection chart:FamilyMaterialSize/rangeConfigurationsTypical applicationsLiquidator ™Malleable iron3/8” - 6”Straight, 45°, 90°For use with LFMC in tough, industrial, corrosive applicationsLiquidator LT SA aluminumCopper-free aluminum3/8” - 4”Straight (3/8” through 4”), 90° (3/8” through 2”)Used where aluminum material ispreferred in tough, industrial, corrosive applicationsLTK low profileSteel/malleable iron3/8” - 2”Straight, 45°, 90°Used where there are space restrictions in tough, industrial, corrosive applicationsLTQ LiQuik ™Malleable iron3/8” - 2”StraightLabor saving, no disassembly, in tough, industrial, corrosive applications LTDC zinc die cast Zinc die cast3/8” - 4”Straight, 90°Used where zinc die cast material is preferred in tough, industrial, corrosive applicationsLTNM non-metallic Nylon3/8” - 2”Straight, 90°Use with non-metallic Type B LT conduit in corrosive, commercial and residential applicationsLTS steel Tubular steel1/2” - 2”Straight onlyFor use in cost-competitive applications in light industrial and commercial applicationsLT SS stainless Steel304 stainless steel1/2” - 2”Straight, 90°Used where corrosion resistance is required in tough, industrial, corrosiveapplicationsOverviewLiquidtight fittingsOverviewApplications:Typical applications for liquidtight conduit and liquidtight fittingsinclude the wiring of machine tools, motors, transformers, food processing equipment, robotics, air conditioning units, illuminated storefront signs and billboards, etc. The flexible metallic conduit and fittings protect conductors from mechanical damage due to vibration and movement, and seal out cutting oils, coolants, water, dust, etc. Applications such as these can be found in, but are not limited to, industries such as:• Machine tool manufacturers• Electric power generating plants• Waste treatment facilities• Paint manufacturing facilities• Automobile manufacturing facilities• Aerospace industries• Breweries• Food processing plants• Dairies• Pulp and paper mills• Petroleum refineries• Chemical and petrochemical plants• HealthcareFeatures:• Liquidtight, raintight, oiltight for protection and long life in wet, dusty and corrosive environments• Hex shaped gland nut allows for easy wrenching, providing a fast, tight installation• Suitable for wet locations• Reusable, long ferrule prevents pull-out and tight bend conduit pop-out• Furnished with locknut and sealing ring• Third party certified• Available in insulated and non-insulated versions to meet any customer preferenceCertifications and compliances:• U L Listed liquidtight flexible metal conduit fittings are suitable for use in the following hazardous locations under NEC: - Class I, Division 2;- Class II, Divisions 1 & 2; and- Class III, Divisions 1 & 2;- Suitable for grounding in sizes 3/8” through 11/4” under NEC• UL Standards 514B, 467• cUL Standard C22.2 No. 18F• UL File No. E-19189Insulated throat availableLocknutBodySealing ringGland nutGrounding ferruleSealing gasketLiquidtightLiquidtight fittingsLiquidator™ flexible metallic conduit fittingsApplications:• Liquidator ™ fittings are used when liquidtight conduit is in tough, industrial and corrosive applications• Available in both malleable iron and aluminum construction with the option of a ground lug pre-attachedStandard materials:• Body – straight – 3/8” through 6”: malleable iron; 3/8” through 4”: aluminum45° – 3/8” through 4”: malleable iron90° – 3/8” through 4”: malleable iron or aluminum • Gland nut – malleable iron or aluminum • Ferrule – steel• Gland nut sealing ring – polyethylene • Sealing gasket – thermoplastic elastomer • Locknut – steel or aluminumStandard finishes:• Malleable iron – zinc electroplate • Aluminum – naturalFeatures:• Liquidtight, raintight, oiltight for protection and long life in wet, dusty and corrosive environments• Hex shaped gland nut allows for easy wrenching, providing a fast, tight installation• Suitable for wet locations• Reusable, long ferrule prevents pull-out and tight bend conduit pop-out• Furnished with locknut and sealing ring • Third party certified• Available in malleable iron and aluminum construction • Available in straight, 90 and 45 degree configurations • Available in sizes 3/8” to 6” (select sizes)• Available in insulated and non-insulated versions to meet any customer preferenceCertifications and compliances:• U L Listed liquidtight flexible metal conduit fittings are suitable for use in the following hazardous locations under NEC: - Class I, Division 2;- Class II, Divisions 1 & 2; and - Class III, Divisions 1 & 2;- Suitable for grounding in sizes 3/8” through 11/4” under NEC • UL Standards 514B, 467• cUL Standard C22.2 No. 18F • UL File No. E-19189Insulated throat available (malleable iron only)Aluminum or steel locknutAluminum or malleable iron Polyethylene splitsealing ringMalleable iron or aluminumgland nutSteel grounding ferruleThermoplastic elastomersealing gasketLiquidtight fittingsLiquidator™ flexible metallic conduit fittingsStraight connectors – malleable ironTrade sizeCat. # Non-insulated Cat. # Insulated Unit qty.Wt. lbs. per 100ABC3/”LT38LTB382515.4 1.1250.500 1.125Straight connectors with grounding lug – malleable ironTrade size Cat. # Non-insulated withaluminum grounding lug Cat. # Insulated withaluminum grounding lug Cat. # insulated with copper grounding lug Lug size Unit qty.Wt. lbs. per 100A B C D3/”LT38G LTB38G LTB38GC #4 - #142517.4 1.1250.500 1.1250.750Straight connectors with and without grounding lug – aluminumTrade size Cat. # Non-insulated Cat. # Non-insulated with aluminum grounding lug Lug size Unit qty.Wt. lbs. per 100A B C D3/”LT38 SA LT38G SA #4 - #142513.4 1.1880.594 1.2500.750LiquidtightLiquidtight fittingsLiquidator™ liquidtight flexible metallic conduit fittings90° angle connectors – malleable ironTrade sizeCat. # Non-insulated Cat. # Insulated Unit qty.Wt. lbs. per 100ABC3/”LT3890LTB38902525.4 1.3130.500 1.1254”LT40090LTB4009012381.012.563 1.2505.75090° angle connectors with grounding lug – malleable ironTrade sizeCat. # Non-insulated withaluminum grounding lug Cat. # Insulated withaluminum grounding lug Cat. #Insulated with coppergrounding lug Lug sizeUnit qty.W t. lbs. per 100A B C3/”LT3890G LTB3890G LTB3890GC #4 - #142527.6 1.3130.500 1.1254”LT40090GLTB40090GLTB40090GC#3/0 - #612398.612.563 1.250 5.75090° angle connectors with and without grounding lug – aluminumTrade sizeCat. # Non-insulated Cat. # Non-insulated with aluminum grounding lug Lug sizeUnit qty.Wt. lbs. per 100A B C3/”LT3890 SA LT3890G SA #4 - #142516 1.3130.500 1.1252”LT20090 SALT20090G SA#4 - #141200 3.1880.750 3.000Liquidator™ liquidtight flexible metallic conduit fittings45° angle connectors – malleable ironTrade sizeCat. # Non-insulated Cat. # Insulated Unit qty.Wt. lbs. per 100ABC3/”LT3845LTB38452527.1 1.9380.500 1.12545° angle connectors with grounding lug – malleable ironTrade sizeCat. # Non-insulated withaluminum grounding lug Cat. # Insulated with aluminum grounding lug Cat. #Insulated with coppergrounding lug Lug sizeUnit qty.W t. lbs. per 100A B C3/”LT3845G LTB3845G LTB3845GC #4 - #142529.3 1.9380.500 1.125Replacement liquidtight ferrulesTrade sizeCat. #Unit qty.W t. lbs. per 1003/”FEA38100 1.94”1034.4Stainless steel liquidtight accessoriesSEALING GASKETS (ORDER SEPARATELY)Applications:• To form a raintight seal between a conduit fitting and the outside of a boxFeatures:• Gasket is designed to provide superior sealing for customer applications• Constructed of stainless steel to provide extreme durability in the most corrosive applicationsStandard materials:• Ring – stainless steel• Gasket – neoprene rubberStandard finishes:• Stainless steel – natural • Neoprene rubber – naturalTrade sizeCat. #Unit qty.W t. lbs. per 100A B C1/”SG1SS 5050 1.1250.8130.188LOCKNUTS (ORDER SEPARATELY)Applications:• 316 stainless steel locknuts can be used with conduit or NPS threaded pipeFeatures:• Precision machined threads allow for easy installation• Heavy stock thickness and specially designed tabs tighten securely and will not easily loosen even in the most severe applicationsStandard material:• Locknut – stainless steelStandard finish:• Stainless steel – naturalTrade sizeCat. #Unit qty.Wt. lbs. per 100A B CThreads/inch1/”11SS 10002 1.3130.2500.19014.000Certifications and compliances:• UL Listed • cUL ListedLiquidtight fittingsLiquidtight accessoriesSELF-RETAINING PVC GASKET WITH STEEL RINGUL File No. E-23223COMBINATION COUPLINGS FORCOUPLING LIQUIDTIGHT TO THREADEDRIGID/IMC CONDUIT V For /” liquidtight to /” rigid/IMC.COMBINATION COUPLINGS FORCOUPLING LIQUIDTIGHT TO THREADED RIGID/IMC CONDUIT – GROUNDING TYPEALUMINUM LUG V For /” liquidtight to /” rigid/IMC.Cat. #Trade size Unit qty.Wt. lbs. per 100SG13/” - 1/”1001Cat. #Trade size Unit qty.W t. lbs. per 100V3/”2517LTR2002”1160Cat. #Aluminum ground lug Trade sizeUnit qty.Wt. lbs. per 100V 3/”2524LTR200G2”1162Applications:• Used with locknuts in order to obtain watertight seals when connecting Liquidator ™ fittings to an enclosureCertifications and compliances:• UL Listed (3/8” to 2”)Standard material:• Gasket with steel ring – PVCStandard finish:• PVC – natural Applications:• Used to couple liquidtight conduit to threaded rigid and IMC conduitCertifications and compliances:• UL Listed• cUL Listed• UL File No. E-19189Standard materials:• Body – malleable iron• Ferrule – steelStandard finish:• Malleable iron – zinc platedApplications:• Used to couple liquidtight conduit to threaded rigid/IMC conduit • Available with an aluminum grounding lugStandard materials:• Body – malleable iron • Ferrule – steel • Lug – aluminumStandard finishes:• Malleable iron – zinc plated • Aluminum – natural。
Winner ®过渡接头 AdaptorDIN 卡套接头 DIN Adaptor派瑞特（天津）液压件制造有限公司 派瑞特（天津）液压件制造有限公司 1C 1D 1C-RN 1D-RN直通接头STRAIGHT FITTINGSC-01派瑞特（天津）液压件制造有限公司 直通变径接头STRAIGHT REDUCERS1C 1D 1C-RN 1D-RNC-02派瑞特（天津）液压件制造有限公司 1C9 1D91C9-RN1D9-RN90°弯曲接头90° ELBOW FITTINGSC-03派瑞特（天津）液压件制造有限公司 1CB 1DB 1CB-RN1DB-RN英管螺纹60°锥密封或组合垫密封两用柱端BSP THREAD 60° CONE SEALINGOR BONDED SEAL STUD ENDSC-04派瑞特（天津）液压件制造有限公司 1CB-WD 1DB-WD 1CB-WD/RN1DB-WD/RN英管螺纹胶垫密封柱端BSP THREAD WITH CAPTIVE SEALC-05派瑞特（天津）液压件制造有限公司 1CB9-RN 1DB9-RN 90°弯英管螺纹60°锥密封 90°ELBOW BSP THREAD 60°CONE SEALING1CB91DB9C-06派瑞特（天津）液压件制造有限公司 1CG 1DG1CG-RN 1DG-RN英管螺纹O 形圈密封柱端BSP THREAD STUD ENDS WITH O-RING SEALINGC-07派瑞特（天津）液压件制造有限公司 45°弯英管螺纹可调向O 形圈密封柱端45° ELBOW BSP THREAD ADJUSTABLE STUD ENDS WITH O-RING SEALING1CG4-OG 1DG4-OG 1CG4-OG/RN 1DG4-OG/RNC-08派瑞特（天津）液压件制造有限公司 90°弯英管螺纹可调向O 形圈密封柱端90° ELBOW BSP THREAD ADJUSTABLE STUD ENDS WITH O-RING SEALING1CG9-OG 1DG9-OG1CG9-OG/RN 1DG9-OG/RNC-09派瑞特（天津）液压件制造有限公司 公制外螺纹柱端 ISO 6149 METRIC THREAD STUD ENDSISO 61491CH 1DH 1CH-RN 1DH-RN90°弯公制外螺纹可调向柱端 ISO 614990° ELBOW METRIC THREADADJUSTABLE STUD ENDS ISO 61491CH9-OG 1DH9-OG1CH9-OG/RN 1DH9-OG/RN过渡接头ADAPTER45°弯公制外螺纹24°锥/公制外螺纹可调向柱端ISO 6149-245° ELBOW METRIC MALE 24° CONE/METRIC MALEADJUSTABLE STUD END ISO 6149-21CH4-OG/RN 1DH4-OG/RN1CH4-OG 1DH4-OG1CI 1DI 1CI-RN1DI-RN公制螺纹铰接接头METRIC BANJO1CI-B 1DI-B 1CI-B/RN1DI-B/RN英管螺纹铰接接头BSP BANJO美制JIC74°锥密封JIC 74°CONE SEALING1CJ 1DJ 1CJ-RN 1DJ-RN74o公制螺纹60°锥密封或组合垫密封两用柱端METRIC THREAD 60° CONE SEALING OR BONDED SEAL STUD ENDS1CM 1DM 1CM-RN 1DM-RN60o公制螺纹胶垫密封柱端METRIC THREAD WITH CAPTIVE SEAL1CM-WD 1DM-WD 1CM-WD/RN 1DM-WD/RN布锥管外螺纹NPT MALE1CN 1DN1CN-RN 1DN-RN90°弯布锥管外螺纹90° ELBOW NPT MALE1CN91DN91CN9-RN 1DN9-RNDIN卡套式管接头1CO 1DO 1CO-RN1DO-RN美制螺纹O形圈密封柱端UN、UNF THREAD STUD ENDSWITH O-RING SEALINGDIN卡套式管接头1CO9-OG 1DO9-OG 1CO9-OG/RN1DO9-OG/RN90°弯美制螺纹可调向O形圈密封柱端90° ELBOW UN、UNF THREAD ADJUSTABLESTUD ENDS WITH O-RING SEALING1CT9-SP 1DT9-SP 1CT9-SP/RN1DT9-SP/RN90°弯英锥管外螺纹90°ELBOW BSPT MALE1CT-SP 1DT-SP 1CT-SP/RN1DT-SP/RN英锥管外螺纹BSPT MALE1CW 1DW 1CW-RN1DW-RN焊接接头WELD FITTINGS1CW9 1DW91CW9-RN1DW9-RN90°焊接接头90°WELD FITTINGS1C-Y 1D-Y 1C-Y/RN1D-Y/RN过板接头STRAIGHT BULKHEADFITTINGSDIN卡套式管接头英管螺纹60°锥密封或组合垫密封两用柱端BSP THREAD 60° CONE SEALINGOR BONDED SEAL STUD ENDS 1DB1DB-RN2BC-WD 2BD-WD英管螺纹胶垫密封柱端BSP THREAD WITH CAPTIVE SEAL外螺纹内螺纹转换接头REDUCER TUBE ADAPTORWITH SWIVEL NUT2C-RN2CDIN 卡套式管接头外螺纹内螺纹转换接头90° 弯REDUCER TUBE ADAPTOR WITH SWIVEL NUT 90° ELBOW2C92D92C9-RN 2D9-RN过渡接头ADAPTER24°2CB公制外螺纹24°轻系列/英管内螺纹METRIC MALE 24° L.T./BSPP FEMALEDIN2353卡套式管接头外螺纹内螺纹转换接头REDUCER TUBE ADAPTORWITH SWIVEL NUT2D 2D-RN过渡接头ADAPTER24°2DB公制外螺纹24°重系列/英管内螺纹METRIC MALE 24° H.T./BSPP FEMALE英管螺纹O形圈密封柱端BSP THREAD STUD ENDSWITH O-RING SEALING2GC2GD美制JIC 74°锥密封JIC 74°CONE SEALING2JC 2JD公制螺纹胶垫密封柱端METRIC THREAD WITH CAPTIVE SEAL2MC-WD 2MD-WDDIN 卡套式管接头DIN BITE TYPE TUBE FITTINGS°焊接接头WELD FITTINGS2WC2WD内螺纹直通接头STRAIGHT TUBE ADAPTERSWITH SWIVEL NUT3C3D4C 4D 4C-RN4D-RN堵头PLUG英管内螺纹柱端接头BSP FEMALE STUD FITTINGS5CB5DB5CB-RN5DB-RN钢垫密封英管压力表接头BSP PRESSURE GAUGE CONNECTORWITH DKI SEALING RING5CB-GDK 5DB-GDK5CB-GDK/RN 5DB-GDK/RN钢垫密封英管压力表接头BSP PRESSURE GAUGE CONNECTORWITH DKI SEALING RING7BC-GDK/S 7BD-GDK/S公制内螺纹柱端接头METRIC FEMALE STUD FITTINGS 5CM5DM5CM-RN5DM-RN6C6D6C-LN/RN6D-LN/RN6C-RN6D-RN6C-LN6D-LN直通过板接头STRAIGHT BULKHEAD FITTINGS6C96D990°弯曲过板接头90° ELBOW BULKHEAD FITTINGS6C9-LN/RN6D9-LN/RN6C9-RN6D9-RN6C9-LN6D9-LN公制螺纹卡套接头METRIC THREAD BITE TYPE TUBE FITTINGS700M-I公制铰接螺栓METRIC BOLT720B-I英制铰接螺栓BSP BOLTDIN 卡套式管接头钢垫密封英管压力表接头BSP PRESSURE GAUGE CONNECTORWITH DKI SEALING RING7BC-GDK/S 7BD-GDK/S过渡接头ADAPTER8C公制螺纹锁母METRIC LOCK NUT内螺纹堵头FEMALE PLUG9C 9D三通接头EQUAL TEESAC ADAC-RN AD-RN。
Bite type fittings DIN 2353 (ISO 8434-1) (Norsok Spec. Class GS70, FS70)CONTENTSFittings IndexWALFORM - tube fittingsTest CouplingsWalform Technical InformationAssemby instructionsBite type fittings DIN 2353 (ISO 8434-1)WALPRO Bite type fittings to DIN 2353. (ISO 8434-1)Approved by Det Norske Veritas for the following pressures:L - Serie: 6 - 10mm / 500 BAR. 12 - 18mm / 400 BAR 22 - 42mm / 250 BAR S - Serie:6 - 10mm / 800 BAR 12 - 16mm / 630 BAR 20 - 38mm / 400 BARNOTE:Above pressures for Mild SteelWorking pressures for Stainless Steel Aisi 316 specified on each page.ESV AS evLDSVWMAVevW DSWGAIGE M VSTI evGE WSVT SV WE6-42mmevT BUZ RI (Norsok Spec. Class GS70, FS70)GRUnion ReductionL /SL Ø1Ø2S 2S 1S 3i 1L = Approximate length with nut tightened,x = Price on request.Bite type fittings DIN 2353 (ISO 8434-1)GAIL = approximate length with nut tightenedParalell female stud coupling(Norsok Spec. Class GS70, FS70)RBite type fittings DIN 2353 (ISO 8434-1)L2 = approximate length with nut tightened x = Price on request(Norsok Spec. Class GS70, FS70)Bite type fittings DIN 2353 (ISO 8434-1)(Norsok Spec. Class GS70, FS70)GEBSPMale stud couplingwithnon-standard threadsMaterial:Mild Steel or Stainless SteelBelow Part No`s are for Mild SteelWhen ordering Stainless Steel, add 316to below Part no.Supplied with NBR e.d. seal on Mild SteelSupplied with Viton e.d. seal on Stainless Steel Aisi 316Bite type fittings DIN 2353(ISO 8434-1)247 (Norsok Spec. Class GS70, FS70)316to below Part no.Bite type fittings DIN 2353 (ISO 8434-1)(Norsok Spec. Class GS70, FS70)GENPTMale stud couplingL /SBite type fittings DIN 2353(ISO 8434-1)316to below Part no.Bite tube fittings DIN 2353 (ISO 8434-1)evWL 2= approximate length with nut tightenedAdjustable male stud elbow.Material:Mild Steel or Stainless SteelBelow Part No`s are for Mild SteelWhen ordering Stainless Steel, add 316to below Part no.* Supplied with fitted NBR O-Ring. (Perbunan) - Mild Steel Supplied with Viton O-ring on Stainless Steel Aisi 316Other material on request.(Norsok Spec. Class GS70, FS7Adjustable male studTee-stud barrelMaterial:Mild Steel or Stainless SteelBelow Part No`s are for Mild SteelWhen ordering Stainless Steel, add 316to below Part no.* Supplied with fitted NBR O-Ring. (Perbunan) on Mild SteelSupplied with Viton O-ring on Stainless Steel Aisi 316.Other material on request.S3S2 S1(Norsok Spec. Class GS70, FS70)L1 and L2= approximate length with nutevTL 2= approximate length with nut tightenedAdjustable equal TeeMaterial:Mild Steel or Stainless SteelBelow Part No`s are for Mild SteelWhen ordering Stainless Steel, add 316to below Part no.* Supplied with fitted NBR O-Ring. (Perbunan) on Mild Steel Supplied with Viton O-ring on Stainless Steel Aisi 316Other material on request.S 3S 2S 1L1= approximate length with nut tightenedL2= approximate length with nut tightened Cont. next pageL2= approximate length with nut tightenedKORReducing fittingS - SerieMaterial:Mild Steel or Stainless SteelBelow Part No`s are for Mild SteelWhen ordering Stainless Steel, add 316to below Part no.*Supplied with fitted NBR O-Ring. (Perbunan) - Mild Steel Supplied with Viton O-Ring on Stainless Steel Aisi 316Other material on request.(Norsok Spec. Class GS70, FS70)SWVEL2 = approximate length with nut tightened x = Price on requestBanjo couplingMaterial:Mild Steel or StainlessSteelBelow Part No`s are for Mild SteelWhen ordering Stainless Steel, add 316to below Part No.(Norsok Spec. Class GS70, FS70)DSVWL = approximate length with nut tightened x = Price on requestChoke free Banjo CouplingsMaterial:Mild Steel or Stainless SteelBelow Part No`s are for Mild SteelWhen ordering Stainless Steel, add 316to below Part No(Norsok Spec. Class GS70, FS70)。
