TLD3100K桌面型液晶监视器介绍

目录前言 (4)一、液晶监视器的原理 (5)1.1高清信号的表现能力 (5)1.2高清监视器的分类及原理 (6)1.2.1 CRT显示器的原理及特点 (6)1.2.2 LCD显示器的原理及特点 (7)1.2.3 PDP显示器的原理及特点 (8)1.3 高清环境下对专业监视器的使用需求 (9)1.3.1 高清专业监视器的画幅要求 (9)1.3.2 专业监视器的指标要求 (10)1.3.3 使用环境的适应性要求 (10)二、液晶监视器的应用 (12)2.1 液晶监视器的传统应用 (12)2.1.1 接口 (12)2.1.2 传统辅助功能 (12)2.2液晶监视器的扩展应用 (13)2.2.1 像素到像素显示 (13)2.2.2音频电平表 (13)2.2.3多摄像机分屏联调 (14)2.2.4波形监视功能 (14)2.2.5测光功能 (24)2.2.6时间码显示功能 (25)三、液晶监视器的测试 (26)3.1 常规测试 (26)3.1.1范围 (26)3.1.2规范性引用文件 (26)3.1.3术语和定义 (26)3.1.4测量的一般要求 (27)3.1.5视频测试信号 (27)3.1.6音频测试信号 (33)3.1.7测试仪器 (33)3.1.8测量条件 (33)3.1.9一般测量步骤 (34)3.1.10测量位置: (34)3.1.11一般工作条件下的测试 (35)3.1.12显示格式 (35)3.1.13整机消耗功率 (36)3.1.14待机消耗功率 (36)3.2图像的显示特性 (37)3.2.1亮度 (37)3.2.2对比度 (37)3.2.3亮度均匀性 (38)3.2.4白色色度误差 (39)3.2.5基色色度坐标 (39)3.2.6色温 (39)3.2.7色域覆盖率 (40)3.2.8色度均匀性 (40)3.2.9重显率 (41)3.2.11视角 (41)3.2.12像素缺陷 (43)3.2.13残留影像 (43)3.2.14固有分辨力 (44)3.2.15白平衡误差 (44)3.2.16亮度均匀性与视角的关系 (45)3.2.17色度与视角的关系 (45)3.2.18拖尾 (46)3.2.19亮度与功率比 (47)3.2.20通断比 (47)3.2.21响应时间 (47)3.2.22灰阶响应时间 (49)3.2.23亮度非线性 (49)3.2.24亮度启动特性 (49)3.2.25漏光 (50)3.2.26黑电平图像的亮度稳定性 (50)3.3声音通道特性 (50)3.3.1声音通道检测说明 (50)3.3.2左右声道的增益差 (50)3.3.3左右声道的串音 (51)3.3.4工作噪声声级 (51)3.3.5待机噪声声级 (52)3.4测试图示例 (53)3.4.1高清晰度复合测试图 (53)3.4.2标准清晰度复合测试图 (53)3.4.3亮拖尾时间（正）测试卡 (53)3.4.4亮拖尾时间（负）测试卡 (53)3.4.5暗拖尾时间（正）测试卡 (53)3.4.6暗拖尾时间（负）测试卡 (53)3.5专项测试 (57)3.5.1标准清晰度数字电视主观评价用测试图像 (58)3.5.2广播级监视器的清晰度、频率特性、空间频率特性、滤波特性、亮色和色亮串扰 (58)四、几款液晶监视器测试比较实例 (60)4.1 实例1 (60)4.1.1测试仪器： (60)4.1.2被测液晶监视器型号 (60)4.1.3 测试项目及方法： (61)4.1.4测试结果 (62)4.2 实例2 (64)4.2.1测试仪器： (64)4.2.2被测监视器型号 (64)4.2.3 测试项目及方法 (65)4.2.4测试结果如下 (65)前言数字化以来电视系统的变革可谓是“天翻地覆”，尤其以奥运会和中华人民共和国六十周年华诞为契机，国内已陆续开播了多个高清频道，高清节目已经开始进入寻常百姓家。

3.5-INCH TFT-LCDTEST MONITORINSTRUCTION MANUALSpecially made for Surveillance systemPlease read the following items before use.●Dear customers, thanks for using this product, we sincerely hope our products can bring you convenience, and before start to use it, please pay attention to the following items.And please keep it after reading the safety notice.1）Forbidden to use in the high temperature environment especially not allowed in hi-temperature bathroom, the most suitable working temperature for this product is approximate 0-60℃If something breaks down, please turn off the monitor, and take out the batteries, or pull out the plug of the charger. When product leaks smoke 、exception smell or other exception matter . If continue using, it may cause fire disaster or suffer shockDon’t redo or knock down the machine (Do not open the case ), if the machine breaks down or the case gets broken. Please don’t continue using ,otherwise it may cause the fire disaster or suffer shock.2）Don’t redo、heat up、over-tweak or drag the connection wire, and please don’t put heavy object on the connection wire, otherwise it may damage the wire, and cause fire disaster or suffer shock. when wire damaged, please contact the local wholesaler to change.3）Please don’t place the product in disbalance place, otherwise it may make the machine drop to get damage.4）Please use the dominated batteries, and when fixing the batteries, please do in accordance with demonstration.Please don’t heat up 、redo or knock down the battery, please don’t drop the battery or make it get hit, please don’t place the battery in the metal container. Use the dominated charger to charge the battery. any fails from the above case may cause battery explosion or leak, thereby cause the fire disaster or body harmness.5）Please use the dominated battery or AC charger. Please don’t use it at the voltage beyond the fixed range.6）If battery leaks, and the liquid comes into your eyes、skin or clothes, please wash the position touched, if necessary, please contact the doctor or dial the emergent number.7）When plug get damaged or it’s loosen when inserted into the socket, please don’t use the AC charger, otherwise it may cause fire disaster or suffer shock.8）Clean the monitor. and when not used for a long time, please take out the batteries, or pull out the plug, otherwise it may cause fire disaster or suffer shock.9）When charging finished, please pull out the plug from the socket, otherwise fire disaster may happen.10）Keep the product away from water or other liquid, otherwise there may be danger of fire disaster or shock.In order to keep your safety, please use the adapter we supplied (Regarding the damages caused by using adapters from other supplier, we are not responsible to it).11）Don’t set the machine in the place of bared sunshine.12）In order to keep it away from damage by dropping or bumping at sharp object, Please place the machine in the place where the children can not reach,When the battery’s working time is apparently shorter than new one, please change the battery.13）The machine will get heat after long time working, it belongs to normal phenomenon.14）Please don’t place the charger in the place of much dust or intensity vibration、extreme humidity or high temperature (for example: under the bare sunshine or beside the heater )15）The available voltage for the charger is AC 110~240 V / 50/60 Hz. Plug standard is various from different environment; when purchase this product, please consult relevant department to confirm the suitable plug standard. 16）During charging, the batteries and charger will get heat, it belongs to normal phenomenon, but not malfunction. If possible, please charge the battery in aeration area.Battery and power supplyThe following items state the right way to use batteries and the way to extend its lifespan Using the batteries in incorrect way will shorten its lifespan or cause to leak、overheat、fire or explode.●Battery comes out from factory with no power. Please charge it before use. and put it into the battery box whe n don’tuse it.Battery usage notice-If leaving the battery to be idle, it will lose electricity gradually. Please charge it at 1-2 day early before use·When battery in idle status, turn off the monitor, it’s a way to extend the lifespan.·The performance will reduce when battery in low temperature environment; battery can’t work normally in cold condition. place a fully charged battery in warm place. Don’t place battery close to heater or hand-warming articles.Charging Notice·Please put the batteries into the machine,and then connect the charger well.this product adopts IC to conduct electrical source management.when fit on the battery,it will conduct auto-inspection(the red light flash 2 times),if battery goes worng,the red light flash quickly;if working normally,the LED indicator light keep red.if fully charged,the red light will go out.10 minutes more charging again it’s a way to check if the charged battery is full or not.The charge time will extend if the surrounding temperature lower than 10℃ or higher than 35℃,please don’t charge the battery in the place where temperature is higher than 40℃;it stops charging when temperature under 0 ℃.it’s not allowed to charge the fully charged battery again,and you don’t have to wait to charge until the el ectricity totally runs out.·It’a normal phenomenon that battery gets heat when charge over or after use.Battery’s lifespanIn normal temperature,users can charge battery for 300 times.when the working time of consuming its full capacity apparently decrease,users need to change the battery.Storage·If long time no use after fully charged, the battery’s perfermance will weaken.·If don’t use this machine for a long time,please take the batteries ou t,and store them in a dry place，moreover the store temperature should between 15℃ and 25℃.Please don’t place it in extremely high or low temperature area.Attention:battery usage notice-Don’t transport or store the battery together with necklace、barrette and other metal object.·Don’t throw the battery into fire to heat up.·Don’t knock down or redo the battery.·Please use the dominated charger to charge.·Deal with the batteries discarded.·Don’t drop the battery or make it suffer intense vibration.·Please keep it away from water.·Please keep its connection terminal clean.·It’s the normal phenomenon that the battery and machine get heat after long time working.Alternating Current Adapter·Please just use the adapter dominated for this machine,if use other kind of adapter may cause matters to the machine. ·AC adapter for indoor use.·Make sure that DC plug connect to the monitor firmly.·Please turn off the monitor before pull out the plug.·Don’t use it in other devices.·Don’t knock it down yourself.·Don’t place it in high temperature or humidy area.·Please don’t let it suffer intense shake·It’s a normal phenomenon that the adapter buzzs or get heat when using.·If adapter cause wireless interference,please reset the antenna.Product UseIn order to make sure of the normal working,please don’t let the machine get hit or shake.Electric interferenceThis product may cause interference to the medical and aviatic devices.before you use it in the hospital or airport,please consult the hospital the airline company.Liquid crystalIf screen suffered damage,please avoid to touch the liquid crystal.if any case of the following happens,please do as we show.·If liquid crystal gets to your skin,please clean the position with cloth,then daub some soap and then wash it.·If liquid crystal comes into your eyes, please flush the eye with water more than 15minutes,and then ask for help from doctor.·If drink the liquid crystal by mistake,please gargle with water,and drink much water to help throw up,and then consult the doctor.Debug The MachineBefore start to monitor the important spot,please adjust the machine to make sure of its normal working.we are not responsible to any damage or benefit loss caused by product’s malfunction.ClaimSpecification subject to change without notice, we have the final explaination right to do a explaination to this manual. ·The screen is made from high precise technology,still there would be brightness dot or color abnormity on screen sometimes.it’s the normal phenomenon to this kind of LCD,but not failure.·When fall acrosse wireless interference( such as magnetic field、static or circuit noise),the abnormity display may happen.AccessoryPower Charger 1pcWall mount bracket 1pc1.2V AA nickel-hydrogen battery 4pcsA V cable #1( video input) : 1pcAv cable #2 (video output): 1pcWrist strap 1 pcUsers’manual 1pcWarranty card 1pcAppearance and function illustrationMenu adjustmentBrightness Brightness adjustment: Users can change the brightness and darkness of image by adjusting the parameter according to his personal requirement. Firstly, press MENU key to enter main menu interface, and then press “▲”key or “▼”key to confirm this submenu, then press “▲”or “▼”to adjust the brightness and darkness of image. Press ESC key to exist main menu.Contrast Contrast adjustment: Users can change the contrast of image by adjusting the parameter according to his personal requirement. Firstly, press MENU key to enter main menu interface, press MENU key to select downwards(moving the yellow cursor to this submenu),and then press “▲”key or “▼”key to confirm this submenu, in the end press “▲”or “▼”to adjust the contrast of image. Press ESC key to exist main menu.Saturation Saturation adjustment: Users can change the saturation of image by adjusting the parameter according to his personal requirement. Firstly, press MENU key to enter main menu interface, press MENU key to selectdo wnwards(moving the yellow cursor to this submenu),and then press “▲”key or “▼”key to confirm this submenu, in the end, press “▲”or “▼”to adjust the saturation of image. Press ESC key to exist main menu.Sharpness Sharpness: Users can change the sharpness of image by adjusting the parameter according to his personal requirement. Firstly, press MENU key to enter main menu interface, press MENU key to select downwards(moving the yellow cursor to this submenu),and then press “▲”key or “▼”key to confirm this submenu, in the end, press “▲”or “▼”to adjust the sharpness of image. Press ESC key to exist main menu.V olume V olume adjustment: Users can change the volume of image by adjusting the parameter according to his personal requirement. Firstly, press MENU key to enter main menu interface, press MENU key to select downwards(moving the yellow cursor to this submenu),and then press “▲”key or “▼”key to confirm this submenu, then press “▲”or “▼”to adjust the volume of image. Press ESC key to exist main menu.Language English / Italian / ChineseInstallation Illustration Battery fixing1.Product fixing methodUsers have four methods to fix this product, you can choose the accessories supplied to fix according to the various situation.⑴Portable: APut it on your arms by using the wrist strap.(this method is usually suitable to outdoor working or or indoor camera lens adjustment in construction field)⑵ Portable: BHanging the machine at your waist.（3） Fixing on wall :Fix the machine on wall by using the wall bracket.（4）Normal MethodOpen the multi-function bracket to stand the machine on the table-board.2.OPERATION1、Put the batteries into machine according to the direction marked with “+” “-”.2、Insert the A V cable 1 (including power output cable) to the jack in position 9of the illustration. And then connect the red RCA connecter to video signal port, and the white one to audio port.3、Switch the power switch to “ON” side.4、If you need to output A V signal , insert A V cable 2 to the jack in position 10 of the illustration. Yellow cable for video output, white one for audio output.5、If powerless, you can charge it as it’s working. Conn ect the charger to position 7 of the illustration.6、When the image comes to be normal, you can adjust it by key 3、4、5 and 6.showed in the illustration.SpecificationTrouble shootingBefore calling for repair, please refer to this section to see whether you can solve it by yourself; if you need help, please contact our after sale service centre or our wholesaler.。

上海速展机电有限公司经销网址：电话：************葛经理XK3100-B B2称重显示器XK3100-使用手册上海友声衡器有限公司制00000033号XK3100系列称重显示器感谢您选用了我公司的XK3100系列称重显示器显示器，，请在使用前认真阅读本手册请在使用前认真阅读本手册，，并按本手册操作手册操作。

如有任何疑难问题如有任何疑难问题，，可与本公司直接联系，我们将为您提供满意的服务。

厂址：上海市崇明江口经济小区邮编：202165目录第一章：概述---------------------------------------------------------------------------------------（4）第二章：主要参数-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------（4）第三章：安装---------------------------------------------------------------------------------------（5）一、仪表前视图------------------------------------------------------------------------------（5）二、仪表后视图------------------------------------------------------------------------------（5）三、传感器与称重显示器的连接---------------------------------------------------------（5）第四章：标定说明---------------------------------------------------------------------------------（6）一、重量标定--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------（6）1、设定分度值-------------------------------------------------------------------------（6）2、设定小数点-------------------------------------------------------------------------（6）3、设定零点范围----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------（6）4、设定最大称量----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------（6）5、重量标定----------------------------------------------------------------------------（6）二、修改标定参数-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------（7）1、修改小数点-------------------------------------------------------------------------（7）2、修改零点范围----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------（7）第五章：串行通信说明-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------（7）一、串行通信设置----------------------------------------------------------------------------（7）1、串行口的设置--------------------------------------------------------------------------（7）2、波特率的设置-------------------------------------------------------------------------（7）二、数据格式说明----------------------------------------------------------------------------（8）1、帧格式说明-----------------------------------------------------------------------------（8）2、数据格式说明-------------------------------------------------------------------------（8）第六章：操作说明-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------（8）一、键盘功能说明----------------------------------------------------------------------------（8）二、操作说明----------------------------------------------------------------------------------（8）1、去皮功能-----------------------------------------------------------------------------（8）2、置零功能-----------------------------------------------------------------------------（9）3、计重模式操作说明-----------------------------------------------------------------（9）4、计数模式操作说明-----------------------------------------------------------------（9）5、百分比模式操作说明---------------------------------------------------------------（9）三、报警与出错信息-------------------------------------------------------------------------（10）第七章：维护保养及注意事项-----------------------------------------------------------------（10）第一章概述XK3100-XK3100-BB 2称重显示器是我公司最新推出的通用称重仪表，其主机电路采用美国著名半导体厂商最先进的增量调制型（增量调制型（∑∑-△）AD 转换集成芯片，具有精度高、性能稳定可靠、上下限设定报警、计数计数、、百分比工作模式，使用操作方便使用操作方便、、功能强功能强，，可方便地与称重传感器组成各种电子台秤可方便地与称重传感器组成各种电子台秤、、机电结合秤及其它专用衡器等用衡器等，，可广泛应用于商业可广泛应用于商业、、工矿企业工矿企业、、仓库码头等计量场合仓库码头等计量场合，，其性能价格比优于市场上的大多数产品其性能价格比优于市场上的大多数产品。

PhilipsLCD monitor with Analog TV tuner58 cm (23") w T-line1920x1080 Full HD230T1SBFull HD TV monitor with HDMI in a stylish packageExperience brilliant multimedia performance with this stylish, glossy and stunning Full HD 1080p display with TV tuner! Combined with HDMI and AV inputs along with powerful sound the 230T1 takes entertainment to a new height!Best picture quality•Full HD LCD display, with a 1920x1080p resolution •SmartContrast 50000:1 for incredible rich black details •SmartImage: Optimized user-friendly display experience •Up to 5ms response time for clear, fast moving action Great convenience•Built-in TV tuner for viewing TV programs on your PC monitor •Remote control for TV functionsExperience true multimedia•HDMI-ready for top quality, multimedia experience•SmartSound selects a perfect mode for audio performance •Incredible Surround for enhanced audio enjoymentHighlightsFull HD LCD display 1920x1080pThe Full HD screen has the widescreenresolution of 1920 x 1080p. This is the highest resolution of HD sources for the best possible picture quality. It is fully future proof as it supports 1080p signals from all sources, including the most recent like Blu-ray and advanced HD game consoles. The signalprocessing is extensively upgraded to support this much higher signal quality and resolution. It produces brilliant flicker-free progressive scan pictures with superb brightness and colors.HDMI ReadyAn HDMI-ready device has all the required hardware to accept High-DefinitionMultimedia Interface (HDMI) input. A HDMI cable enables high-quality digital video and audio all transmitted over a single cable from a PC or any number of AV sources (including set-top boxes, DVD players, A/V receivers and video cameras).SmartContrast ratio 50000:1You want the LCD flat display with the highest contrast and most vibrant images. Philips advanced video processing combined with unique extreme dimming and backlightboosting technology results in vibrant images. SmartContrast will increase the contrast with excellent blacklevel and accurate rendition of dark shades and colors. It gives a bright, lifelike picture with high contrast and vibrant colorsIncredible SurroundIncredible Surround is an audio technology from Philips that dramatically magnifies the sound field to immerse you in the audio. Using state-of-the-art electronic phase shifting, Incredible Surround mixes sounds from left and right in such a way that it expands the virtual distance between the two speakers. This wider spread greatly enhances the stereo effect and creates a more natural sounddimension. Incredible Surround allows you to experience total surround with greater depth and width of sound, without the use of additional speakers.5ms response timeResponse time measures signal reaction speed in milliseconds. Faster response time is better as it eliminates visible image artifacts that could dampen your experience when viewing fast moving images or objects. In this case, this LCD panel gives you 5ms response time so that you can watch your LCD TV with a clear,fast moving action.Issue date 2022-04-21Version: 1.0.212 NC: 8670 000 61584EAN: 87 12581 53478 3© 2022 Koninklijke Philips N.V.All Rights reserved.Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective owners.SpecificationsPicture/Display•Aspect ratio: Widescreen, 16:9•Brightness: 300 cd/m²•SmartContrast: 50000:1•Contrast ratio (typical): 1000:1•Diagonal screen size: 23 inch / 58.42 cm •Panel resolution: 1920 x 1080•Picture enhancement: Progressive scan, TrueVision•Response time (typical): 5 ms•Screen enhancement: Anti-Reflection coated screen•Viewing angle: 170º (H) / 160º (V)Supported Display Resolution•Computer formats Resolution Refresh rate 1920 x 1080 60Hz •Video formats Resolution Refresh rate 480i 60Hz 480p 60Hz 576i 50Hz 576p 50Hz 720p 50, 60Hz 1080i 50, 60Hz 1080p 50, 60HzSound•Output power (RMS): 2 x 3W•Sound Enhancement: Incredible Surround, Smart Sound•Sound System: Mono, StereoConvenience•Ease of Installation: Automatic Tuning System (ATS), Plug & Play•Ease of Use: On Screen Display, Program List, Side Control•Remote control: 230T1 Remote control•On-Screen Display languages: English, SimplifiedChinese•Other convenience: VESA mount (100x100mm)•Screen Format Adjustments: Widescreen, Normal, Zoom 1, Zoom 2•Smart mode: Movie, Standard, Personal, Vivid, Eco •SmartSound:Music, Speech, PersonalTuner/Reception/Transmission•Aerial Input: 75 ohm coaxial (IEC75)•TV system: PAL I, PAL B/G, PAL D/K •Video Playback: NTSC, PAL •Tuner Display:PLLConnectivity•Signal Input: VGA (Analog ), HDMI, PC Audio in•Ext 1: CVBS in, Audio L/R in •Ext 2: YPbPr in, Audio L/R in •Ext 3: CVBS out, Audio L/R out•Other connections: S-Video in, CVBS in, Audio L/R in, Headphone outPower•On mode: 49W (Typ.@monitor mode)•Off mode: 0.5W•Ambient temperature: 0 °C to 40 °C •Mains power: 100-240V, 50/60HzDimensions•Product with stand (mm): 399 x 560 x 176 mm •Product without stand (mm): 364 x 560 x 65 mm •Packaging in mm (WxHxD): 477 x 653 x 160 mmWeight•Product with stand (kg): 5.53 kg •Product without stand (kg): 5.35 kg •Product with packaging (kg): 7.59 kgAccessories•Included accessories: Table top stand, Power cord, Quick start guide, User Manual, Remote Control, Batteries for remote control。

使用说明书液晶监视器简体中文版至客户：感谢阁下购买及使用本彩色液晶监视器，开箱时请检查箱内的附件是否齐全。

在连接部件及接通电源之前，请先详细阅读本使用说明书并请保留本使用说明书以备后用。

目录一、安全指南 (1)二、附件 (2)三、PC模式下驱动程序的安装 (2)四、面板控制与端子接口的说明 (3)五、遥控器说明 (4)六、液晶监视器与各种信号的连接 (5)七、OSD基本调整 (6)八、PC显示模式 (7)九、产品规格 (8)十、故障维修 (9)一、安全指南重要注意事项！高压危险！本机内有高压，请勿打开机壳，以免触电。

维修时应委托专业人员。

不正确的操作方法可能会导致触电或火灾事故，为确保您的安全及彩色液晶监视器的使用寿命，请在使用前仔细阅读下述安全注意事项。

●在使用本机前，必须阅读并理解所有使用指示。

●必须妥善保存使用说明书，以备将来之需要。

●必须严格遵守本机其使用说明书上的警告指示。

●操作时必须遵照所有使用说明。

●请勿使用制造商没有推荐的附设装置，不恰当地使用设置可能会发生意外故障。

●请使用彩色液晶监视器所配的电源适配器，在把 AC 电源线接到电源插座之前，请检查电视规格的电压源要求是否合适本地电源供应条件，如果您不能确定使用电源的类型，请与经销店或当地的电力部门联系。

●不要用任何物品压迫或缠绕电源线。

破损的电源线会导致触电或引起火灾。

●请勿试图自行维修本机，由于本机内有高压装置和其他易损坏器件，会对人体或电视本身造成各种危害，请务必让专业维修员进行维修。

●请勿触摸使用说明书中没有提及的控制部件。

对使用说明中没有提及的控件部件进行不适当的调整会损坏本机，也会增加专业技术人员的维修工作量。

●本机需要更换配件时，请向维修人员确认使用制造商指定的或性能与原件相同的配件。

配件使用不当会导致火灾、触电、电视损坏等危险。

●若要将本机挂装在墙上或吊在天花板上时，请按照制造商推荐的方法进行安装。

●清洁本机前，先拔掉电源。

31MU97C-B ↓31" class (31.0”/787.4mm diagonal)31MU97Z-B↓31" class (31.0”/787.4mm diagonal)SpecificationsNative Display Resolution 4096 x 2160 High Brightness 320 cd/m 2Contrast Ratio1,000: 15MS (G to G)Response Time, Built-in SpeakersTilt, Pivot, Height Adjustable, Base Detachable Stand Vesa™ Compliant Wall Mountable MAC Compatible3-Year Limited Warranty Parts/Labor/BacklightFeatures1ST 4K MONITOR FOR SMALL MONITOR CATEGORY 31MU97 delivers Digital Cinema 4K with 4096x2160 Full HD and UHD resolution with pivot and height adjustment features for professionals. It makes work environments more convenient than ever and maximizes work productivity in any field of business.DIGITAL CINEMA 4K•Digital Cinema 4K (4096x2160) resolution delivers the optimal DCI film industry standard and provides more detailed content at 4096x2160 resolutionIPS DISPLAY WITH ADOBE RGB•Color differences and color loss are minimized in the wide color gamut and color temperature that covers both the sRGB and CMYK color range.SINGLE STREAM TRANSPORT•Supports SST (Single Stream Transport) technology that delivers Digital Cinema 4K resolution from a single source.DCI-P3 DIGITAL CINEMA COLOR STANDARD•DCI-P3 Digital Cinema Color Standard reproduces the full dynamic range of shadow, color, saturation and brightness ofcontent accurately.D i g i t a l C i m a 4K 4096 x 2160HD280x 720Fu ll H D 1920x1080U H D 3840x 21604K Monitor For Creative ProfessionalsIPS DISPLAY WITH ADOBE® RGB OVER 99.5%By supporting Adobe RGB over 99.5% with IPS technology, the 31MU97minimizes color differences and color loss by using a wide color gamut and color temperature that covers both sRGB and CMYK color ranges.As a result, retouching of photos on the 31MU97 creates final images with vivid and vibrant colors that other VA or LCDs cannot.DCP-P3 DIGITAL CINEMA COLOR STANDARDThe 31MU97 with DCI-P3 Digital Cinema Color Standard reproduces the full dynamic range of shadow, color, saturation and brightness of content accurately throughout post-production, matching what will be seen in the theater. On-site, superfine editing and over all control can be achieved while using a preview camera.SINGLE STREAM TRANSPORTSupports SST (Single Stream Transport) technology that delivers Digital Cinema 4K resolution from a single source. A smooth viewing experience is achieved while previewing film content without any image sync issues or image tearing like that of other 4K monitors with limited MST (Multi-Stream Transport) or Tiled technology.Shooting with on-site preview cameraFull dynamic ranges are accurately reproduced in post-production.On-screen color is accurately reproduced.OTHER 4K MONITORSUHD 4K Monitor (3840x2160)Upper/lower mattes are visible with the letterbox ratio LG Digital Cinema 4K (4096x2160)31MU97C-B Pixel Perfect RatioMulti-Stream Transport Splits the input signal from the GPU into two signals and combines them again to create a single screen effect.Image TearingTiled TransportStitches signals from multiple GPU input signals together to create a whole screen effect.LG DIGITAL CINEMA 4K 31MU97(4096x2160)Single Stream TransportTrue single signal output of the GPU to display a smooth and consistent viewing experience.D i g i t a l C i n e m a 4K 4096 x 2160PIVOT/HEIGHT ADJUSTMENTThe 31MU97 comes with a 90° pivot function for working on projects that are more vertical than horizontal to keep the size of the project as large as possible on the screen. And easily adjust the height of the screen for optimal working conditions.MULTIPLE COLOR MODESThe 31MU97 comes with variety of color modes ranging from the basic sRGB and Reader, all the way to the more advanced Adobe RGB and DCI-P3 Sim,to accommodate a wide spectrum of needs required by professionals. Simply choose between color mode feature presets or customized calibrations using the joystick.MAC COMPATIBLE/MULTI-PORTSMiniDP , Display ports and USB 3.0 ports. And with two Thunderbolt™ports to directly connect a Mac PC or Pegasus2 storage directly to transmit data faster thanexternal HD.+USB UP+MiniDP to MacPro®+ 5W SpeakersWith two internal 5W speakers and MAXXAUDIO®functions, there is no need for separate high-end monitor speakers. The 31MU97 which supports MAXXAUDIO® delivers high quality sound with a wide range of vibrant, crisp, and clean high and low decibels while reviewing or editing 4K content.10-BIT COLOR DEPTH (1 billion colors)10-bit color depth that supports over 1-billion colors is 64 times richer than an 8-bit color display, re-creating colors softly and naturally without color banding. All the images details are displayed with a richer and wider color range that enables accurate, detailed, and natural-looking images. More shades in-between gradient transitions are displayed for a smoother image.TOTAL COLOR MANAGEMENTThrough detailed color calibration testing, the 31MU97 maintains its color standard with software calibration and a factory preset,minimizing differences in color space and expressions between the original images,monitor screen, and printed result.*Select the desired color environment through various color tests for color accurate reproduction.Test AConventional (8bit)LG Digital Cinema 4K 31MU97 (10 bit)Full HD Monitor (1920x1080)LG Digital Cinema 4K (4096x2160)2000 Millbrook Drive Lincolnshire, IL 60069Customer Service: /supportContact your LG Regional Sales Representative:Channel: 800.897.8871Hospitality: 800.228.1236E-mail:********************SPEC_31MU97C-B_31MU97Z_061655_PRAll screen images are simulated.Dimensions and weights are approximate. Design,specifications, and features subject to change without notice.© Copyright 2016 LG Electronics USA, Inc. All Rights Reserved. “LG Life’s Good” is a registered trademark of LG Corp.ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. In Plane Switching is a trademark of LG Philips LCD Ltd. VESA is a trademark of Video Electronics Standards Association. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.All other product and brand names are trademarks or registered trademarks of their respective companies.Printed in the USA. June 2016Digital Cinema 4K Monitor For Creative Professionals29.0” (736.6mm)12.5” (154.9mm)2.1” (53.3mm)9.5” (241.3mm)5.0” (127mm)11.8” (299.7mm)16.0” (406.4mm)29.0” (736.6mm)6.1”(154.9mm)6.1”(154.9mm)(100mm)(100mm)Rear Jack Panel Dimensions31MU97C-B ↓31" class (31.0”/787.4mm diagonal)31MU97Z-B↓31" class (31.0”/787.4mm diagonal)。

显示屏发光数字 (38 x 48 mm), 显示屏保护材质使用有机玻璃第一行 (测量值) 4 位数字,尺寸: 14 x 48 mm 第二行 (单位) 4 位数字,尺寸: 14 x 48 mm小数点位置可设置: 0 / 0.0 / 0.00量程-9.99 ~ 99.99 和 -999 ~ 999精确度±0.1 % 测量值 ±1 位通道数 1 ~ 3个通道可供选择通道位置红色 Led 显示通道, V1, V2 和 V3可选测量单位30 个预设的可设置测量单位 (详见下一页单位表)响应时间< 1 秒产品特色- 交替显示最多3组测量参数- 3组声光报警- 直接在面板上进行设置，无需拆卸- 模拟输入信号:3通道0-5/10 V 或0/4-20 mA- 以太网通讯 (可选)- 总线(MODBUS RS-485) 通讯功能- 30组预设的可配置测量单位- 不锈钢面板带发光数字显示外壳功能显示规格嵌入式多功能显示器ATE310前面板材质: 拉丝不锈钢 316 L 后外壳材质: 不锈钢 304 L 防护等级: IP65 (正面面板) 重量: 585 g234 m m92 mm44 mm42.5 mm70 mm196 m m3.2 mm218 m m76 mm69 mm147.3 m m电源24 Vac / Vdc ±10 % 注意触电风险模拟信号输入 3 x 0/4-20 mA 或3 x 0-5/10 V; 电压负荷 < 30 Vac ;输入阻抗 100 Ω ;电流隔离在模拟输入信号和电源之间功耗 4.32 VA符合标准2014/30/EU EMC ; 2014/35/EU 低电压;2011/65/EU RoHS II ; 2012/19/EU WEEE接线端口螺丝接线槽适用电缆 直径 0.05 ~ 1.5 mm 2 ; 或 30 ~ 16 AWG总线 RS-485 通讯Modbus RTU 协议, 通讯波特率 2400 ~ 115200以太网通讯 (可选)通过以太网传输、管理和维护变送器，满足 TCP/IP 协议，10BASE-T 和100BASE-TXLAN/WAN 。

he default language of the menu system is English. To select another language, press the Menu button on the projector or remote control.and press Enter. Select LanguageSelect your language and press Enter. Press the MenuAdjust the image1 I f you don’t see an image, press one of the Source buttons on the remotecontrol or the Home and arrow buttons on the projector to select theimage source.Note: If you still see a blank screen or have other display problems,see “Troubleshooting.”2 F or the best image quality, place the projector directly in front of thecenter of the screen, facing the screen squarely. If this is not possible, turnthe horizontal and vertical lens shift dials to adjust the image position andcenter it on the screen.3 I4 Turn the zoom ring to reduce or enlarge the image.5 T6 IPress the ordistortion.Using the remote controlMake sure the batteries are installed as shown (two AA batteries).Viewing 3D imagesTo view 3D content, you must first connect a 3D-compatible video device toone of the HDMI ports on your projector. You will also need a pair of Epson®(part number V12H548006) or Epson-compatible RF 3D active shutter glasses.1 Turn on and begin playback on the 3D-compatible video device.Note: Make sure you set the video device to play content in 3D mode.2 Press the 3D Format button on the remote control, if necessary.3 Slide the power switch on your 3D glasses to the Onposition.Note: If the glasses don’t automatically display 3D content, you mayneed to pair them with the projector. Move the glasses within 10 feet(3 m) of the projector, then press and hold the Pairing button on the3D glasses for at least 3 seconds. The status light on the glasses willalternately flash green and red, then remain green for 10 seconds ifpairing is successful.You can also automatically convert 2D HDMI content to 3D. To enable the2D-to-3D Conversion option, press the Menu button on the projector or remote control. Select Signal and press Enter, then select 3D Setup and press Enter. Select 2D-to-3D Conversion and press Enter. Select the Weak, Medium, or Strong setting, then press Enter.See the online User’s Guide for more information on adjusting 3D images. TroubleshootingIf you see a blank screen or the No signal message after turning on your video device or computer, check the following:•Make sure the power light on the projector is blue and not flashing.•P ress one of the Source buttons on the remote control or the Home and arrow buttons on the projector to switch to the correct image source, if necessary.•I f you’re using a Windows® laptop, press the function key on your keyboard that lets you display on an external monitor. It may be labeled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it (such as Fn + F7). Wait a moment for the display to appear.•I f you’re using a Mac laptop, open System Preferences and select Displays. Click the Arrangement tab and select the Mirror Displayscheckbox.If the keystone correction feature doesn’t correct the image, make sure you first set the lens to the center-top position using the horizontal and vertical lens shift dials.If 3D images aren’t displaying properly, check the following:•M ake sure to wear the 3D glasses within 32 feet (10 m) of the projector.•C heck that your 3D glasses have not entered standby mode. Slide the power switch on the 3D glasses into the Off position, then back to theOn position.•P ress the Menu button on your remote control, select the Signal menu, then 3D Setup, then select 3D Display. Make sure that the 3D option is selected. You may also need to set the Diagonal Screen Size setting in the Signal menu. See the online User’s Guide for more information.•C heck that your video device and media are both 3D-compatible. Refer to the documentation that came with your video device for moreinformation.Where to get helpManualsFor more information about using the projector, click the icons on your desktop to access the online manuals (requires an Internet connection). If you don’t see icon links to the manuals, you can install them from the projector CD or go to the Epson website, as described below.Telephone support servicesTo use the Epson® PrivateLine® Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada). Support hours are 6 am to 8 pm, Pacific Time, Monday through Friday, and7 am to 4 pm, Pacific Time, Saturday. Days and hours of support are subjectto change without notice. Toll or long distance charges may apply. Internet supportVisit /support (U.S.) or www.epson.ca/support (Canada) for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson. RegistrationRegister today to get product updates and exclusive offers. You can use the CD included with your projector or register online at /webreg.Optional accessoriesFor a list of optional accessories, see the online User’s Guide.You can purchase RF 3D glasses (part number V12H548006) or other accessories from an Epson authorized reseller. To find the nearest reseller,call 800-GO-EPSON (800-463-7766). Or you can purchase online at (U.S. sales) or www.epson.ca (Canadian sales). NoticesBluetooth Safety and SpecificationsContains Bluetooth module model: DBUB-E207This document provides safety instructions and describes the specifications. Read this document carefully before use to ensure your safety and product performance.U.S.FCC NoticesContains FCC ID: BKMAE-E207This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and receiver.•C onnect the equipment into an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.This antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures.Properly shielded cables must be used for connections to LCD Projector in order to meet FCC emission limits. The cable for peripheral with a ferrite core must be used for RF interference suppression.FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 7.9 inches (20 cm) between the radiator and your body.CanadaIndustry Canada (IC) NoticesContains IC: 1052D-E207This Class B digital apparatus complies with Canadian ICES-003.CAN ICES-3(B)/NMB-3(B)This device complies with Industry Canada license-exempt RSS standard(s). Operationis subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device.This device and its antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with IC multi-transmitter product procedures.Radiation Exposure Statement:This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm (7.9 inches) between the radiator and your body.This equipment is not permitted for use on aircraft or satellites.EPSON and PowerLite are registered trademarks, and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc.Mac is a trademark of Apple Inc., registered in the U.S. and other countries.General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.This information is subject to change without notice.© 2016 Epson America, Inc., 6/16Printed in XXXXXX CPD-51844。