Self-inspection checklist of PPE (PPE自检清单)

PPE管理和使用1.目的1.1规范PPE的使用,确保防护意外的伤害1.2规范PPE的管理,确保PPE正确有效1.3规范PPE使用反馈,预先控制不可预期的危险2.范围2.1本程序适用PPE的采购、保存、管理、发放以及使用通则2.2本程序不适用于外部合约商人员参见合约商安全手册2.2适用伊立欧所有员工3.职责3.1厂长负责本程序的批准负责PPE的采购申请批复监督PPE采购、管理和发放使用3.2 HSE部门负责PPE的采购申请负责PPE的正常备用库存负责PPE的发放负责PPE的使用监督负责PPE的使用培训负责PPE的报废审核3.2采购物流部门按照申请文件执行采购负责联络供应商提供PPE技术支持4.内容4.1 PPE采购4.1.1HSE部根据库存报表和实际需要向厂长提交采购申请,并注明型号、数量等4.1.2业已批复的申请被传递到采购部门4.1.3采购部门根据申请明细执行采购4.1.4采购时应注意：供应商应具备劳动保护用品经营许可PPE必须具备三证：生产许可证、产品合格证、安全鉴定证PPE选型应适合国家相关标准根据作业环境向供应商技术支持人员进行选型咨询经济适用,不影响工作4.1.5采购完成后入库前须联合HSE工程师检查产品质量4.1.6不合格PPE参照采购程序执行退换等操作4.2验收入库、保存4.2.1HSE部门将验收合格的PPE进行入库登记4.2.2HSE部门应在入库后根据PPE实际效用时间,对其库存地地点进行挂牌明示4.2.3HSE部门应每一个月应对库存PPE进行检查检查库存条件：通风应良好,湿度适中,无霉蛀现象检查时效性PPE的时间剩余检查库存量,进行盘存详见PPE库存明细表检查PPE的完好性并处于待用状态如自给式呼吸器的气压等4.2.4HSE部门应每月制定一份PPE收支表提交厂长备查4.3培训4.3.1对于任何一种PPE均由HSE部门或供应商技术人员提供使用培训4.3.2使用培训内容原理选用的标准,了解PPE的使用性能范围如何检查PPE的有效性如何佩戴使用如何清洁、维护PPE4.3.3接受培训人员须培训后签到--见培训签到表4.4领用4.4.1在伊立欧宁波工厂PPE领用实行用废即补的原则,原则上不受数量控制4.4.2所有领用人员应本着节约的原则,严禁浪费或挪为私用4.4.3所有PPE除手套、一次性用品外报废更换应以旧换新4.4.4领用人于HSE处领取所需PPE,并在PPE领用明细表上署名4.5 PPE的配置4.5.1伊立欧员工PPE通用配备：安全帽一顶安全鞋一双4.5.2生产操作、仓管员、维修人员除了通用配备外,还有：安全眼镜一幅耳塞一幅工作服过滤式防毒半面具一套耳罩防尘口罩一次性,每人单独使用手套棉布、防酸碱、PVC、一次性乳胶,随机敌腐灵喷剂生产车间2瓶、仓库一瓶、维修一瓶备用自给式正压呼吸器2套备用—机动防飞溅防护面屏10套备用—机动防化衣6套备用—机动4.5.2访客安全帽安全鞋针对需要到厂区的合约商人员,但原则上不予配备防静电白大褂贵宾用4.6使用4.6.1对使用人员要求：会检查PPE的可靠性会正确使用PPE会正确维护保养PPE4.6.2通用使用方法具体PPE使用参见使用说明指导程序使用前先做外观检查,检查其缺陷或损坏程度、严密性、机械效能检查使用标签,确保其在有效期限内使用严格按照使用说明指导程序使用4.6.3使用区域明细所有员工进入一级危险区域均应戴安全帽、安全鞋;注：除行政办公大楼外的厂内区域均为一级危险区域详见图示从事生产车间工艺和罐区巡查的操作人员－必须穿戴：安全帽、工作服、安全鞋、安全眼镜－选择穿戴：防化手套、防护面屏和防毒半面具、以及备用敌腐灵喷剂仓管员在管廊处卸料区域卸料作业－必须佩戴：安全帽、工作服、安全鞋、安全眼镜－选择穿戴：防化手套、防护面屏和防毒半面具、以及备用敌腐灵喷剂操作员进入成品包装车间－必须佩戴：安全帽、工作服、安全鞋－选择穿戴：安全眼镜、防尘口罩、耳塞从事污水处理、废液处理等作业人员－必须佩戴：安全帽、工作服、安全鞋、安全眼镜－选择穿戴：防化手套、防护面屏和防毒半面具、以及备用敌腐灵喷剂在罐区、生产车间等区域从事机械仪表维修-必须佩戴：安全帽、工作服、安全鞋、安全眼镜、-选择佩戴：棉布手套、防化手套、防护面屏和防毒半面具、以及备用敌腐灵喷剂;进入BF3储室作业者-必须佩戴：安全帽、防化服、安全鞋、防护面屏-选择佩戴：自给式正压呼吸器、防化手套、以及备用敌腐灵喷剂;电工作业员－必须配备：安全帽、绝缘安全鞋、工作服－选择穿戴：进入生产车间罐区等区域还需佩戴防毒半面具;任何在厂区内超过2米的高空存在坠落危险的作业者必须佩戴安全带,参见特种作业控制程序;工程类管理人员进入一级危险区域：－必须穿戴：安全帽、安全鞋－选择穿戴：工作服、防毒半面具、防尘口罩、安全眼镜等非工程类行政、物流、人事、财务等进入一级危险区域－必须穿戴：安全帽、安全鞋－选择穿戴：防静电白大褂等进入密闭空间作业参见特殊作业控制程序－必须穿戴：安全帽、安全鞋、双管式远程呼吸保护器－选用穿戴：工作服或防化服、防化手套或一般棉布手套等4.6.4使用后的PPE使用者负责清洁,按照具体使用规程保养;4.6.5原则上,PPE应用75%的酒精溶液消毒清洁;4.6.6使用中途发现PPE不能达到预期的防护效果,立即于HSE处调换;4.6.7对于沾上对甲酚、氢氟酸等强腐蚀性物品的PPE由HSE部门外协清洗;5.报废和失效5.1安全帽开裂、变形或受剧烈冲击后等达不到标准抗冲击能力的,给予报废,更换;5.2安全鞋出现底部开裂、突水、脱胶等情况给予报废,更换;5.3安全眼镜和防护面屏出现镜面花糊,不能达到预期的视觉效果,给予报废,更换;5.4防毒半面具的滤盒在新鲜空气中依旧存在大量有害气味,说明吸附能力丧失,给予报废,更换;5.5自给式正压呼吸器每次使用后气罐压力低于150bar,应立即通知HSE更换气瓶;5.6敌腐灵喷剂有效期自第一次开封使用后6个月,应视为失效;5.7手套发现刺孔和进液或者严重污渍等情况,可以丢弃,但应置于专门的垃圾桶内;5.8防尘口罩外层严重污渍、呼吸困难、破损等情况下,可以丢弃,但应置于专门的垃圾桶内;6.相关文件6.1自给式正压呼吸器使用规程6.2防毒半面具使用规程6.3 PPE保养规程6.4 PPE领用记录表PPE使用管理规定1.目的：防护用品是防止现场作业员工遭受危害的最后一道防护措施;在许多无法以工程改善与卫生管理措施对危害物质达到有效防护的作业中,员工必须依赖防护工具的保护;但是,若未正确选用防护工具,不但无法达到应有的保护效果,而且会使作业人员误认已受到有效防护,致健康遭受危害而不自知;因此特制订此程序,以提供员工正确选用防护具、使用及保养应有的基本知识;2.适用范围国内法规规定或公司规定在操作危险工作或暴露在危险环境下,所须配戴的个人防护工具必须提供给员工使用,且员工必须依规定穿著适当防护具;3.名词定义：头部防护具：安全帽等.呼吸器官防护具：口罩、面罩、供气式呼吸器等面部防护具：防护眼镜、防护面罩等手部防护具：防化学手套、隔热手套、焊接手套、绝缘手套、一般劳动手套等躯干部防护具：防化服、防化围裙、安全带、工作服等耳部防护具：耳塞、耳罩等足部防护具：安全鞋、绝缘靴、防化靴等PPE：意思为个人防护用品;4. 职责与内容：4.1.职责：4.1.1公司最高层承诺并提供给员工符合国际或中国法规要求的个人防护用品;4.1.2 HES：公司内所有个人防护用品由HES根据相关法规要求及现场需要进行危害评估后负责建议申请采购,并负责个人防护用品的验收、使用监督及提供相应的培训;个人防护用品交付验收时需检查三证即劳动防护用品生产许可证、产品合格证、安全鉴定证是否齐全,防护用品是否存在破损或失效;4.1.3采购部：根据HES及使用部门的个人防护用品采购申请联系供应商进行采购,保证个人防护用品准时到货并确保数量、实物与采购申请一致;4.1.4仓库：确保个人防护用品收货数量核对、入库、临时存放保管,并及时通知HES及使用部门取货;4.1.5财务部：确保经HES评估所需,购物申请获批后所需购买的个人防护用品经费足够并及时支付;4.1.6员工职责：4.1.6.1 积极参加劳动防护用品的相关培训,根据岗位情况主动按要求佩戴相关的劳动防护用品;4.1.6.2 爱护个人防护用品;根据培训要求仔细检查、使用、清洁、保养、储存和更换个人防护用品; 4.1.6.3 发现个人防护用品可能不起保护作用或疑有健康受危害的迹象,立即报告主管/班长或HES人员;4.1.7主管经理职责：各部门主管和经理必须保证其下属遵守此PPE管理程序;4.1.7.1 确保员工在上岗前已接受有关的个人防护用品培训4.1.7.2 确保员工在工作场所正确佩戴规定的、处于良好工作状态的个人防护用品4.1.7.3 对不遵照此规定的员工进行再培训及警告处分,或按公司有关规定进行处理;4.2.3本公司所具备的个人防护器材安全帽、安全鞋、安全带、防护面罩、防护眼镜、带线耳塞、防化学手套、活性炭口罩、防尘口罩、半面罩、N95口罩、气瓶式呼吸器、绝缘手套、焊接手套、隔热手套、绝缘鞋、工作服、焊接防护服、消防服、救生衣、救生圈、防雨用具等;4.2.4个人防护用品的使用4.2.4.1 所有进入公司车间人员必须遵的个人防护用品佩戴要求;进入生产操作区域戴安全帽、口罩操作人员需戴防毒面罩、手套从事高温需戴隔热手套、从事焊接需戴焊接手套穿工作服、劳保鞋;特殊工作根据工作危害性质佩戴详见附件一防护用品规划表;4.2.4.2 HES根据法规及公司要求判断工作内容或工作场所需要使用个人防护器材,定出附件一〖防护用品规划表〗,附件一〖防护用品规划表〗,4.2.4.3 其他特殊危险作业及防护用品规划表上规定使用防护器材的地方,从事特殊操作作业人员应主动按照规定佩戴齐全,并接受部门主管及HES人员监督;4.2.4.4 各部门领用防护用品后,自行保管,包括点检、清洗;4.2.5 HES定期现场检查PPE的安全状况;4.2.6 HES在检查过程中,根据防护用品的叛废标准进行叛废;叛废标准：判废条件符合下述条件之一者,即予判废;a. 不符合国家标准或专业标准；b. 未达到上级劳动保护监察机构根据有关标准和规程所规定的功能指标；c. 在使用或保管贮存期内遭到损坏、超过有效使用期或影响使用效果,经检验未达到原规定的有效防护功能最低指标;4.3个人防护用品的佩戴时机及注意事项4.3.1头部防护安全帽4.3.1.1 存在坠落物或头顶障碍物伤害风险之作业场所必须佩戴符合个人防护用品标准的安全帽;4.3.1.2注意事项：a.禁止放在地上当凳子坐;b.不用时应收妥,勿掷于地面或丢弃在可能受毁之地方;c.使用时应扣紧帽带,感觉舒服为适度,头顶与帽壳间留有适当之空间;d.不得在安全帽上敲击或钻洞,以免损及强度;e.安全帽应常保持完整美观,头带应保持清洁;f.帽壳有裂痕或颚带损坏应立即更换;G．安全帽的正确佩戴4.3.2面部防护用品4.3.2.1配戴时机：a.防护眼镜：液体喷溅从事使用酸、碱类化学药品、油漆类等工作有害眼睛液体、气体场所或进行切割、电钻、打磨、尘粒飞扬场所等应配戴安全防护眼镜,以防有害之液体或颗粒伤及眼睛;b.防护面罩：防止液体化学溶剂、酸、碱等喷溅面部;电焊、打磨除锈时防止火星、铁锈溅入眼睛或烫伤、击伤脸部皮肤;4.3.2.2注意事项：a.镜片、面屏应经常保持清洁;b.不用时,应妥善保管收藏,以免损坏;c.日常佩近视眼镜的员工可以使用眼镜安全护翼,但是他们所佩戴的必须是树脂镜片;d.当且仅当佩戴护目镜是为了防范碰撞风险时,才允许佩戴隐形眼镜;若佩戴护目镜是为了防范其他风险,如化学飞溅物,高浓度尘埃,或操作熔铸金属等,则禁止佩戴隐形眼镜;使用呼吸器时亦不能佩戴隐形眼镜; 4.3.3呼吸器官防护用品4.3.3.1配戴时机：a.口罩：主要用来防止粉尘,用在有较低浓度的有害气体,且接触时间比较短;b.面罩及配套滤盒：主要用于防有机蒸汽、酸性气体及有毒气体接触时间稍长;如进行喷漆作业或金属清洗作业时;c.供气式呼吸器：主要用于化学品大量泄漏,现场环境恶劣,浓度较大,且接触时间长或火灾现场;4.3.3.2注意事项：a.限次使用的口罩应放在保险袋里密封保存,以免其失效过快;b.滤罐式面罩要点检、清洁,确保其在有效期内;c.供气式呼吸器要确保其一定压力,在使用前要检查其气密性;d.重复使用之呼吸器防护用品在使用完毕后要进行清洗;4.3.4手部防护用品4.3.4.1配戴时机：a.为防止人员手指、手掌、手腕、手臂接触有害物或烫热设备,防止切割伤时,必须配戴适当之手套、袖套; b.防化学物：接触酸、碱等化学品或矿物油类应使用橡胶或人造橡胶之防化学手套,对于有机溶剂类则使用塑料材质手套,请参考物质安全资料表;c.防电：操作检查或抢修高压电设备或220伏特以上活线作业应使用检查合格之橡胶绝缘手套;.4.3.4.2注意事项：a.戴用以前应检查是否有裂、变形损坏；使用后应放置在干净而清凉通风之地方;b.〖防护用品规划表〗,选用适当种类手套;4.3.5躯干部防护用品4.3.5.1配戴时机：a.为防止工作人员于搬运、倾注或处理化学物品如强酸、强碱等,可能有被液体沾溅之伤害时,喷漆作业时,须穿用防化服、围裙或喷漆服,或喷砂作业时须穿用喷砂防护服;b.从事高架作业2米及以上之作业之人员,必须配戴安全带以防止坠落之伤害;4.3.5.2注意事项：a.应选择适当之围裙,穿著时须绑好带固定以不影响工作人员之动作为原则,以免引发危害;c.所使用之围裙对于危害物品能提供有效之保护作用;d.安全带、挂绳弄脏时,应用清水洗涤,若仍不能去污时,再以中性清洁剂清洗,洗后尽量吸干,并置于日光照射不到、通风良好的室内处所自然晾干;安全带、挂绳若沾上油漆、涂料时应用布擦拭,严禁使用溶剂擦拭;f.金属部分若沾到水时,应用布擦干,并加防晒油擦拭;g.金属回转部分或折动部分,应定期加油保养,沾有砂或泥土时要擦拭干净;4.3.6耳部防护用品4.3.6.1配戴时机：噪音超过80分贝之工作区域时, 人员须配带耳塞或耳罩;4.3.6.2注意事项：a.切勿使用纸、棉花、布或其它物品代替耳塞;b.耳塞或耳罩,应经常保持清洁,必要时经常作消毒;4.3.7足部防护用品4.3.7.1配戴时机：搬运、修护、具腐蚀性操作,以及为防足部有受伤害之虞者,工作时均应穿著安全鞋;进入工作现场或车间一定要穿安全鞋,有感电之虞者应穿绝缘靴;存在滑倒风险的工作场所应穿防滑安全鞋;禁止穿着凉鞋或布鞋;若存在能够刺穿鞋底风险,应穿着防刺穿防砸安全鞋;4.3.7.2注意事项：a. 所有的安全鞋或靴必须首先防砸防滑效果;b. 若员工在380伏或更高额定电压的带电电力系统上工作,则必须穿高压绝缘靴;c.若员工在危险化学品较多区域工作必须提供耐腐蚀的安全鞋;4.3.8防坠落保护安全带、系索和救生索是最常使用的坠落保护用品;一般而言,在以下情况下,员工必须使用安全带,并固定在救生索或坚固的结构件上;a.使用没有护栏之动力平台b.使用距离坠落面2米以上且没有护栏的脚手架系统c.使用吊椅d.在距离坠落面2米以上的高空作业;e. 未设平台及防护栏而架空高度在二米以上处所或开口旁;f. 从事外墙清洗作业;4.4一般使用注意事项：所有个人用防护用品在使用前要先目视检查,使用后要清洁、保养及必要之消毒并放在各部门指定适当地点;4.5维护保养与检查4.5.1保养a.各类防护用品于使用完毕后立即保养;b.防护用品表面喷溅到化学品,立即以清洗剂及清水冲洗干净,以布或纸擦干或自然晾干,但注意擦拭时,勿刮伤面罩或眼镜的表面;c.呼吸面具类,宜以专用擦拭布或清水冲洗、自然晾干,并予以必要之消毒;d.防护用品要储存在干净、干燥的地方,并避免阳光之照射;4.5.2检查a.各类防护用品由各使用部门自行安排人员定期检查,确定所有防护用品保持良好可用状况;b.数量不足或有损坏,立即报告至HES予以补充;4.6选用之防护用品应为国家检验合格或经国际合格认证之产品,对于工作的干扰越小越好,且不致造成使用者之不适应;4.7员工有感染疾病之虞时,应个别使用专用防护用品或作预防感染疾病之措施;4.8进入本公司参观或施工厂商,如遇上述情形,均依照办理;4.9具体工作内容和工作区域需使用的防护用品请参照附件一〖防护用品规划表〗;。

叉车自检报告及叉车使用说明及承诺书英文回答：Forklift Self-Inspection Report and Forklift Usage Instructions and Commitment。

As a responsible operator, it is my duty to ensure the safety and proper functioning of the forklift I operate. To this end, I will conduct a thorough self-inspection of the forklift before each use, following the manufacturer's recommended guidelines.Pre-Operation Inspection Checklist。

1. General Appearance: Check for any visible damage to the forklift, such as dents, cracks, or leaks. Ensure that all guards and covers are securely in place.2. Controls: Inspect the steering wheel, brake pedal, accelerator, and hydraulic controls for proper operation.Make sure the controls move smoothly and respond quickly.3. Fork Assembly: Examine the forks for any damage, deformation, or wear. Check that the forks are properly aligned and secured to the carriage.4. Tires: Check the tire pressure and condition. Ensure that the tires have adequate tread depth and are free of any cuts or punctures.5. Battery: For electric forklifts, check the battery level and ensure that the connections are secure. Look for any signs of corrosion or damage to the battery or its components.6. Hydraulic System: Inspect the hydraulic hoses and fittings for any leaks or damage. Ensure that the hydraulic fluid level is within the recommended range.7. Safety Features: Check the operation of the horn, lights, and seatbelt. Ensure that all safety features are functioning properly.8. Documentation: Review the forklift's maintenance and inspection records to ensure that all necessary maintenance and repairs have been performed.Forklift Usage Instructions。

口腔科消毒柜自查报告表模板英文回答：Introduction:The purpose of this self-inspection report is to assess the hygiene and cleanliness of the dental clinic's disinfection cabinet. The disinfection cabinet plays a crucial role in maintaining a safe and sterile environment for both patients and dental staff. In this report, I will evaluate the condition of the disinfection cabinet and provide recommendations for improvement if necessary.Inspection Checklist:1. Cleanliness: Is the disinfection cabinet clean and free from debris, dust, and stains?2. Organization: Are the instruments properly organized and stored in the disinfection cabinet?3. Functionality: Do all the components of the disinfection cabinet, such as the shelves, drawers, and locks, function properly?4. Sterilization: Are the sterilization procedures followed correctly, and are the instruments effectively sterilized?5. Documentation: Are the sterilization logs andrecords up to date and properly maintained?6. Personal Protective Equipment (PPE): Are there sufficient PPE, such as gloves, masks, and gowns, available in the disinfection cabinet?Inspection Findings:1. Cleanliness: The disinfection cabinet is generally clean, with only a few minor stains on the shelves. However, there is some dust accumulation in the corners that needsto be addressed. Regular cleaning should be implemented tomaintain a high level of cleanliness.2. Organization: The instruments in the disinfection cabinet are well-organized, with each item labeled and stored in designated compartments. This helps in easy retrieval and minimizes the risk of cross-contamination.3. Functionality: All the components of thedisinfection cabinet are functioning properly. The shelves and drawers open and close smoothly, and the locks are secure. This ensures the safety and security of the instruments stored inside.4. Sterilization: The sterilization procedures are being followed correctly, and the instruments are effectively sterilized. The autoclave is regularly tested and calibrated to ensure proper functioning. However, it is essential to monitor the sterilization process regularly to detect any potential issues.5. Documentation: The sterilization logs and records are up to date and properly maintained. Each sterilizationcycle is recorded, including the date, time, and operator's name. This documentation provides a clear record of the sterilization process and helps in tracking any potential issues.6. Personal Protective Equipment (PPE): There is an adequate supply of PPE available in the disinfection cabinet. Gloves, masks, and gowns are readily accessiblefor the dental staff to ensure their safety during the sterilization process.Recommendations:1. Increase the frequency of cleaning to ensure the disinfection cabinet remains spotless and free from dust.2. Conduct regular training sessions for staff on proper organization and storage of instruments in the disinfection cabinet.3. Implement a routine maintenance schedule for the disinfection cabinet to address any potential issuespromptly.4. Conduct periodic audits of the sterilization process to ensure compliance with guidelines and identify areas for improvement.5. Continuously monitor and update the sterilization logs and records to maintain accurate documentation.中文回答：简介：本自查报告的目的是评估口腔诊所消毒柜的卫生和清洁情况。

PPE ManagementPPE管理程序1. Introduction介绍Personal protective equipment (PPE) is minimum protection to personnel in an event of incident. This procedure outlines the general requirements for managing the PPE and provides site wide standard on PPE related system. All areas and all DSPC staff shall follow this procedure to ensure the realization of company safety objectives.个人防护用品是在事件发生时对人员的最起码防护。

本程序概述了个人防护用品管理的一般要求，并提出了涉及人个防护用品相关体系上的全厂标准。

所有区域和所有DSPC员工都要遵守本程序，以保证公司安全目标的实现。

2. Purpose目的PPE is a secondary protection for employees when engineering or administrative controls are not sufficient to protect employees. This procedure provides general concept on the requirements for hazard assessments in the workplace, selection of PPE, training on PPE, proper use of PPE, store and maintenance of PPE, certification and data records.在工程或管理控制不能充分保护员工时，个人防护用品作为员工的第二保护用品。

矿山救护队战前检查流程英文回答：Pre-Mine Rescue Team Inspection Checklist.1. Personal Protective Equipment (PPE)。

Self-contained breathing apparatus (SCBA) and spare air cylinder.Fire-resistant clothing and boots.Gloves, helmet, and eye protection.First aid kit and emergency supplies.2. Equipment.Communication devices (radios, telephones)。

Lighting equipment (headlamps, flashlights)。

Ventilation equipment (fans, ducting)。

Life detection equipment (gas detectors, thermal imagers)。

Extinguishing equipment (fire extinguishers, hoses)。

Hand tools (pickaxes, shovels, crowbars)。

Medical supplies (oxygen, bandages, medication)。

3. Training and Drills.All team members are trained and certified in mine rescue.Regular drills and simulations are conducted.Contingency plans are in place for various scenarios.4. Vehicle and Equipment Inspection.Vehicle is inspected for safety and operability.Emergency equipment is checked and tested.Communication system is tested.Vehicle is fueled and ready to deploy.5. Communication Plan.Established communication protocols with outside support.Regular communication intervals are set.Contingency plans for communication failure are in place.6. Incident Assessment.Gather information about the incident and location.Determine the scope and severity of the situation.Assess hazards and risks for the team.7. Deployment Strategy.Determine the safest and most effective approach.Assign team members to specific roles.Establish communication checkpoints and procedures.8. Rescue Operation.Proceed with rescue mission according to established protocols.Communicate regularly with outside support.Utilize equipment and resources effectively.Monitor team member safety and well-being.9. Post-Rescue Recovery.Decontaminate team members and equipment. Conduct medical examinations.Debrief and evaluate the operation.Restock equipment and supplies.中文回答：矿山救护队战前检查流程。

PPE（个人防护设备）认证SGS公司所提供的个人防护设备（PPE）测试和认证——确保您的产品符合89/686/EEC指令。

PPE为任何由个人穿着或持有的设备或装置，其设计目的是防止一个或多个安全危害。

在欧洲，将PPE产品投入市场上受PPE指令（89/686/EEC）的监管。

这涉及用于家务、休闲和体育活动以及专业用途的大多数安全产品。

PPE 89/686/EEC指令所涵盖的所有产品，必须满足在PPE指令附件II中所列举和描述的基本健康和安全要求（BHSR）。

1PPE测试我们的测试实验室提供对多种类型PPE的全面测试服务：2设备及配件∙眼睛防护，如太阳眼镜、游泳镜∙头部防护，如安全头盔和运动头盔∙手臂/腿部防护，如腕、手掌、膝盖和肘保护用具3服装和鞋具∙防护服，如高能见度服装、摩托车手防护服、焊接服、阻燃隔热防护服∙防护鞋具，如安全、防护、职业鞋具∙防护手套，如机械危险防护手套、焊接手套、热危险防护手套检查PPE质量的第一步为进行测试以评估是否与相关测试标准相符合。

已颁布了针对PPE指令的协调标准，如遵守之，则可认定指令的基本健康和安全要求（BHSR）得到遵守。

除测试外，该协调标准亦描述了对用户信息和产品标记的要求。

4PPE认证PPE分为三大类，即I、II和III。

在各类情况下，您必须出具一份EC合格声明∙PPE的I类：制造商可对其进行自行认证，如简单的园艺手套、太阳镜∙PPE的II类：该类PPE需经由公告机构实施的EC型检验（第10条），如安全头盔和运动头盔、安全鞋具、高能见度服装∙PPE的III类该类PPE需经EC-型检验和厂家审核，以确保质量，如呼吸设备、防坠设备和化学防护服我们通过SGS英国有限公司（公告机构号0120）提供对II类和III产品的EC型认证，并通过我们的全球审核员网络提供对III类产品的认证。

经认证后，制造商可在合格产品上贴上CE标志。

5为何选择SGS公司所提供的PPE测试和认证？我们的全球网络和专家，为您提供一站式的简单解决方案，以满足对PPE产品合规性测试及认证的需求。

2024年中小学校校园安全自我检查清单英文版2024 School Campus Safety Self-Checklist for Elementary and Middle SchoolsIn order to ensure the safety and well-being of students, teachers, and staff members in elementary and middle schools, it is essential to conduct regular self-checks of the school campus. This checklist is designed to help schools identify potential safety hazards and take necessary precautions to prevent accidents and emergencies.General Safety Measures1. Entrances and Exits- Ensure all entrances and exits are easily accessible and free of obstructions.- Check that doors are functioning properly and can be locked securely.2. Emergency Evacuation Routes- Clearly mark emergency evacuation routes and ensure they are easily visible.- Conduct regular drills to practice evacuation procedures with students and staff.3. Security Cameras- Ensure security cameras are installed in key locations around the school campus.- Regularly check the functionality of security cameras to monitor any suspicious activities.4. Visitor Management- Implement a visitor management system to track and monitor all individuals entering the school premises.- Require all visitors to check in at the main office and wear identification badges at all times.Playground Safety1. Playground Equipment- Inspect playground equipment regularly for any signs of wear and tear.- Repair or replace damaged equipment to prevent accidents and injuries.2. Surface Materials- Ensure playground surfaces are covered with appropriate materials such as wood chips or rubber mulch.- Monitor the condition of surface materials to prevent slips and falls.3. Supervision- Assign staff members to supervise students during recess and outdoor playtime.- Educate students on proper playground behavior and safety rules.Classroom Safety1. Fire Safety- Install smoke detectors and fire alarms in all classrooms and common areas.- Conduct fire drills regularly to practice evacuation procedures in case of a fire.2. Chemical Safety- Store hazardous chemicals securely in designated storage areas.- Educate teachers and staff on proper handling and disposal of chemicals.3. First Aid Kits- Ensure each classroom is equipped with a fully stocked first aid kit.- Train teachers and staff on basic first aid procedures and emergency response.Transportation Safety1. Bus Safety- Inspect school buses regularly for mechanical issues and safety hazards.- Enforce seatbelt usage for all students and ensure bus drivers follow all traffic laws.2. Walking Routes- Identify safe walking routes to and from school for students who walk or bike.- Install crosswalks and traffic signs to enhance pedestrian safety.By following this comprehensive checklist and addressing any safety concerns promptly, elementary and middle schools can create a secure and conducive learning environment for all members of the school community.。

Self-Inspection Checklist of Personal Protective Equipment (PPE) October 2003DHHS (NIOSH) Publication Number 2004-101Optional InformationName:Date of inspection:Career-Technical program/course/room:Signature of inspector:GuidelinesThis checklist covers the use of personal protective equipment, including, but is not limited to, safety glasses, goggles, hard hats, gloves, safety shoes, and heat or electrically resistant clothing. Electrical protective equipment, respiratory protection, hearing protection, PPE for construction site lasers, and equipment like safety belts, lifelines, lanyards, and safety nets, are addressed in separate checklists.It is important to note that engineering controls should be the primary method of establishing a safe workplace. Personal protective equipment should only be used where engineering controls are not feasible.1.General Requirements2.Has a hazard assessment been conducted in the workplace to identifypossible hazards that would require the use of PPE? [29 CFR1910.132(d)(1)]Note: The OSHA standard has a non-mandatory Appendix B whichcontains example procedures for conducting a hazard assessment.3.Is there a written certification of hazard assessment whichidenitifies the workplace evaluated, the person certifying that theevaluation has been performed, and the date(s) of the hazard assessment? [29 CFR 1910.132(d)(2)]4.Based on the hazards identified, has PPE been selected for allappropriate individuals? [29 CFR 1910.132(d)(1)(i)]5.Have individuals involved been informed of the PPE selectiondecisions? [29 CFR 1910.132(d)(1)(ii)]6.If PPE is necessary to prevent injury or impairment by exposure tochemical hazards, radiological hazards, or mechanical irritants through absorption, inhalation or physical contact, is it provided?[29 CFR 1910.132(a) and 1926.95(a)]7.Has the selected PPE been fitted to appropriate individuals? [29CFR 1910.132(d)(1)(iii)]8.Is PPE maintained in a sanitary and reliable condition? [29 CFR1910.132(a) and 1926.95(a) and (b)]9.Do appropriate individuals use the PPE selected? [29 CFR1910.132(d)(1)(i)]10.Is defective or damaged PPE removed from service immediately?(shall not be used) [29 CFR 1910.132(e)]Training11.Has each individual who is required to use PPE been provided withtraining? [29 CFR 1910.132(f)(1)]12.对要求使用PPE的员工，接受了相关的培训？13.Has training on PPE included all of the following elements: whenPPE is necessary; what PPE is necessary; how to properly don, doff, adjust, and wear PPE; the limitations of the PPE; and the proper care, maintenance, useful life and disposal of the PPE. [29 CFR 1910.132(f)(1)(i)-(iv)]14.Have the trained individuals demonstrated an understanding of thetraining and the ability to use PPE properly before being allowed to perform work requiring the use of PPE? [29 CFR 1910.132(f)(2)] 15.Are individuals retrained when there is reason to believe that theydo not have the understanding or skill to use PPE properly? [29 CFR 1910.132(f)(3)]16.Is retraining conducted whenever changes in the workplace orchanges in types of PPE make previous training obsolete? [29 CFR 1910.132(f)(3)(i)-(iii)]17.Is there written certification for each person who has received PPEtraining that includes the following: a statement indicating the person understood the training; the name of the person trained; the date(s) of the training; and the subject of the certification? [29 CFR 1910.132(f)(4)]Head, Foot, and Hand Protection18.Are protective helmets used wherever there is the possible dangerof head injury from impact, or from falling or flying objects, or from electrical shock and burns? [29 CFR 1910.132(a), 1910.135(a), 1926.95(a), and 1926.100(a)]19.Do protective helmets that are used in the workplace that werepurchased prior to July 5, 1994 meet the American National Standard Safety Requirements for Industrial Head Protection, ANSIZ89.1-1969? [29 CFR 1910.135(b)(2) and 1926.100(b)]20.Do protective helmets that are used in the workplace that werepurchased after July 5, 1994 meet the American National Standard for Personnel Protection--Protective Headwear for IndustrialWorkers--Requirements, ANSI Z89.1-1986? [29 CFR 1910.135(b)(1)] 21.Is protective footwear used wherever there is the danger of footinjuries due to falling or rolling objects, or objects piercing the sole, and where feet are exposed to electrical hazards? [29 CFR 1910.136(a)]22.Does protective footwear that is used in the workplace that waspurchased prior to July 5, 1994 meet the requirements of theAmerican National Standard for Men's Safety-Toe Footwear, ANSI Z41.1-1967? [29 CFR 1910.136(b)(2)]23.Does protective footwear that is used in the workplace that waspurchased after July 5, 1994 meet the requirements of the American National Standard for Personal Protection--Protective Footwear, ANSI Z41-1991? [29 CFR 1910.136(b)(1)]24.Are appropriate protective gloves used wherever there is the dangerto hands of exposure to hazards such as those from skin absorption of harmful substances, severe cuts or lacerations, severe abrasions, punctures, chemical burns, thermal burns, and harmful temperature extremes? [29 CFR 1910.138(a)]Eye and Face Protection25.Are individuals issued and required to wear appropriate eyeprotective devices while participating or observing activities which present a potential eye safety hazard? [29 CFR 1910.133(a) and 1926.102(a)]Note: Eye potential hazards include: caustic or explosive chemicals or materials, hot liquids or solids, molten materials, welding operations of any type, repairing or servicing of vehicles, heat treatment or tempering of metals, the shaping of solid materials and laser device operation and experimentation.26.Do all protective eye and face devices purhcased after July 5, 1994comply with Z87.1-1989? [29 CFR 1910.133(b) and 1926.102(a)(2)]Note: Regular prescription eye glasses do not meet this requirement.Goggles or other protective glasses meeting the American National Standard must be warn over-top prescription eye glasses.Posting Requirements27.Are all lab or shop entrances, areas and equipment requiring theuse of PPE devices posted with a sign indicating this requirement?[29 CFR 1910.145(c)(3)]。

钢结构车间每日安全隐患排查内容In a steel structure workshop, ensuring daily inspectionfor safety hazards is crucial to create a secure and efficient working environment. By conducting regular inspections, potential risks can be identified and addressed promptly, thereby reducing the likelihood of accidents or injuries. In this article, we will explore the various aspects that should be included in the daily safety hazard inspection checklist for a steel structure workshop.钢结构车间日常安全隐患排查是确保安全和高效工作环境的关键。

通过定期检查，可以及时发现并解决潜在风险，从而减少事故或伤害的发生。

本文将探讨钢结构车间每日安全隐患排查清单中应包括的各个方面。

Firstly, it is essential to inspect the overall condition of the workshop premises. This includes checking for any obstructions or debris on the floor that may cause slips or trips. Additionally, ensure that emergency exits are unobstructed and clearly marked, fire extinguishers are in place and functional, and that there is adequate lightingthroughout the workshop to prevent accidents.重要的是检查车间整体状况。