BTA208S-800E中文资料

T800 Ancillary EquipmentThis Part of the manual features a brief description of the major ancillaries that may be used with T800 series equipment. For a comprehensive list of available ancillary equip-ment, please contact your nearest approved Tait Dealer or Service Centre.T318-02 Receiver/Transmitter MonitorThe T318-02 is designed to monitor the basic operational functions of one T800 receiver and transmitter. The meter and selector switches for monitoring the required functions are mounted on the front panel, as is the monitor speaker which is driven by a built-in amplifier. An optional mute circuit may be used to silence the audio when no carrier is present.Refer to M318-02.T708-91/92 Mains Power SuppliesThe T708-91/92 mains power supplies are designed to power the T800-60 Slimline Repeater and mount on the front panel instead of the options tray. Two versions are available:T708-91 230V/50Hz mains supplyT708-92 120V/60Hz mains supply.The units are electrically the same as (although mechanically different from) the T708-01 and T708-02 respectively.Refer to M700-00 or M708-01.T800-01-001 Programming KitThe T800-01-001 kit is used for programming T800 series base station equipment and must be used in conjunction with a PC, an EPROM programming device and appropri-ate software capable of programming an EPROM from an Intel hex format or binary file. The kit comprises the following items:PGM800Win programming software user's manualPGM800Win programming software on 3" floppy discs.T800-02 CTCSS DencoderThe T800-02 CTCSS unit is designed to operate with the T800 range of receivers and transmitters. It will encode and decode CTCSS tone frequencies within the range 67 to 250.3Hz and is compatible with any other CTCSS unit which conforms to EIA RS220. Refer to TI-346.T800-03 Auxiliary D-RangeThe T800-03 is an additional D-range kit comprising 1 D-range plug assembly, 1 D-range socket and 2 locating pins, nuts & washers.T800-04 RSSIThe T800-04 RSSI option PCB plugs directly into the main PCB (support circuitry being fitted as standard). It is fitted to the T855, T875 and T885 whenever receiver signal strength monitoring is required, e.g. trunking or voting. Its function is to provide a DC voltage proportional to the signal level at the receiver input.Refer to the appropriate service manual.T800-05 Guide RailThe standard T800 series guide with one D-range socket for mounting in the standard 483mm rack frame assembly.T800-06 External Frequency Reference KitThe T800-06 kit features an additional D-range plug which incorporates a miniature RF connector to carry an externally generated 12.8MHz reference signal into a T800 mod-ule. This enables the use of very high stability external reference oscillators for special applications.T800-07 Multichannel KitThe T800-07 is a plug-in multichannel memory PCB (supplied with connecting cable) which is intended as a substitute for the T800-10 memory PCB. Up to 128 channels may be addressed via the on-board DIP switch or remotely via the T800-03 D-range kit. CTCSS frequencies may also be stored alongside channel information within the EPROM.Refer to TI-356.T800-10 Memory ModuleThe T800-10 is the standard, plug-in T800 channel memory PCB.T800-13 Extender RailThe T800-13 extender rail allows a T800 unit to be operated out of the rack with the cov-ers off for tuning purposes. It is fitted with two 15-way D-range connectors.T800-14 Extender RailThe T800-14 extender rail allows a T800 unit to be operated out of the rack with the cov-ers off for tuning purposes. It is fitted with one 15-way D-range connector and one 11-way D-range incorporating a miniature RF connector for an externally generated ref-erence signal.T800-15 Speaker PanelA 60mm speaker panel fitted with a 4Ω speaker and complete with mounting hardware.T800-16 Speaker Panel (formerly T359-01)A 120mm speaker panel fitted with a 75mm x 125mm 4Ω speaker and complete with mounting hardware.T800-19 Rack Mounting FanThe T800-19 kit features a rack mounting fan which is designed to fit into the base of any standard 483mm rack frame without affecting its ability to house 7 modules. The kit contains all mounting hardware.T800-20 Pre-wired RackThe T800-20 is a standard 5U high rack which is wired to accommodate one 25, 50 or 100W base station or repeater. It comes complete with a T800-15 speaker panel and T992-01 blank panel.T800-21 Pre-wired Rack With Interface PCBThe T800-21 is a standard 5U high rack which is wired to accommodate one 25, 50 or 100W base station or repeater. It is also fitted with an interface PCB containing a 25-way D-range to allow the easy integration of OEM products into the base station or repeater configuration. The T800-21 comes complete with a T800-15 speaker panel and T992-01 blank panel.T800-30 & T800-35 DFSK ModulatorsThe T800-30 and T800-35 are DFSK modulators for T800 transmitters, suitable for POC-SAG or similar paging data formats. Analogue transmissions (e.g. tone or speech) are still possible by disabling the data path via a control line. 512 or 1200 baud data rates are link selectable. The T800-35 is adapted for use with an external reference oscillator for simulcast transmission.Refer to TI-373.T800-60 Slimline Repeater Mounting KitThe T800-60 Slimline Repeater kit enables one T800 receiver and one T800 transmitter to be mounted horizontally side-by-side in a standard 483mm rack frame. The kit contains a front panel complete with speaker, an options tray (for mounting a power supply, duplexer, etc.), and a wiring loom to connect the two T800 modules to the terminal blocks mounted on the rear of the options tray. The T708-91/92 mains power supplies (available separately) are designed for use with the T800-60. The rack height of the assembled unit is 2U.T800-80 Local MicrophoneA 600Ω microphone complete with 300mm cord terminated in a ¼" stereo plug.T800-81 Narrow Band Conversion KitThe T800-81 kit provides the components required to convert one T835 receiver from 25kHz channel spacing to 12.5kHz channel spacing for narrow band operation.T800-82 Narrow Band Conversion KitThe T800-82 kit provides the components required to convert one T836 transmitter or one T837 exciter from 5kHz deviation to 2.5kHz deviation for narrow band operation.T800-83 Narrow Band Conversion KitThe T800-83 kit provides the components required to convert one T855 receiver from 25kHz channel spacing to 12.5kHz channel spacing for narrow band operation.T800-84 Narrow Band Conversion KitThe T800-84 kit provides the components required to convert one T856 transmitter or one T857 exciter from 5kHz deviation to 2.5kHz deviation for narrow band operation.T801 Frequency Reference ModuleThe T801 frequency reference module provides a high stability frequency source to which the synthesiser within a T800 base station can be locked. The master standard within the T801 is primarily intended to be rubidium, although high quality ovenised crystal oscillators can also be used in applications where more frequent readjustment of frequency is acceptable. The T801 converts the output frequency from its master stand-ard to the 12.8MHz required by the T800 base station.Refer to M801-00.T801-10 OCXO ModuleThe T801-10 OCXO module provides a high stability frequency source to which the syn-thesiser within a T800 base station can be locked. This will provide T800 transmitters with the frequency stability required for simulcast transmission. The master standard within the T801-10 is a high quality ovenised crystal oscillator (OCXO). Three outputs are provided on the rear panel, which allows up to three T800 transmitters to be refer-enced to the source oscillator.T802-00 Remote MonitorThe T802-00 is a microprocessor controlled remote monitor unit designed for use with Tait base station equipment. Each remote base requires one T802-00 which communi-cates via its integral modem with a centrally located PC based controller. The PC con-troller runs software to convert the raw data from the T802-00 into a user friendly form. Refer to M802-00.T802-10 RF SplitterThe T802-10 RF splitters are used to take attenuated RF from the transmitter to the T802–00 where it is mixed onto the receiver frequency by the shift mixer. This RF is then inserted via another splitter into the receiver. Each T802-10 kit contains 2 identical RF splitter modules.Refer to M802-00.T802-20 Modem & Programming KitThe T802-20 kit provides a modem and the operating software for the T802-00 remote monitor PC controller and comprises the following items:a CCITT V.23 modemT802-00 PC software user's manualT802-00 PC software on a 5¼" floppy disc.T802-21 Programming KitThe T802-21 kit provides the operating software for the T802-00 remote monitor PC con-troller and comprises the following items:T802-00 PC software user's manualT802-00 PC software on a 5¼" floppy disc.T802-22 ModemA CCITT V.23 modem for use with the T802-00 PC controller.T806 Mains Power SupplyThe T806 is a power supply capable of supplying up to 6A at 11-14V DC and is available in 2 versions to suit a mains supply of either 230V/50Hz or 115V/60Hz (nominal val-ues). The T806 is designed to power T800 series 25W transmitters (plus receivers, etc.) and comes complete with a guide to mount in a standard 60mm rack frame assembly. Refer to M806-00.T807 Mains Power SupplyThe T807 is a switching power supply capable of supplying up to 15A at 11-14V DC. It requires a mains supply of 230V/50Hz or 115V/60Hz (nominal values) which can be internally selected with a switch or wire links. The T807 is designed to power T800 series 50W transmitters (plus receivers, etc.) and comes complete with a guide to mount in a standard 60mm rack frame assembly.Refer to M807-00.T808 Mains Power SupplyThe T808 is a switching power supply capable of supplying up to 25A at 11-14V DC. It requires a mains supply of 230V/50Hz or 115V/60Hz (nominal values) which can be internally selected with a switch or wire links. The T808 is designed to power T800 series 100W transmitters (plus receivers, etc.) and comes complete with a guide to mount in a standard 60mm rack frame assembly.Refer to M807-00.T1500-50 Trunking Extra D-Range (formerly T800-50)Trunking systems require additional outputs for flat audio (FFSK) and Rx line monitor-ing. This kit provides the components to connect these outputs via a second D-range.T1500-51 Trunking Transmitter Interface (formerly T800-51)When fitted to a T800 series transmitter, the T1500-51 trunking transmitter interface PCB allows the trunking system to switch the audio processor between FFSK and normal audio. The PCB comes complete with wires, sockets and screws, but a T800-03 auxiliary D-range kit will also be required.KS820 Spares KitThe KS820 spares kit contains all the parts on the T820 series recommended spares list and is intended to provided enough spares to maintain a single installation of up to ten channels. Included in the kit are electrical and mechanical parts that are either unique to Tait equipment, hard to obtain or susceptible to damage or wear and tear. All parts are securely packed in clearly labelled screw top containers in a handy plastic carry case.Note:The kit does not contain standard chip capacitors or resistors.KS830 Spares KitThe KS830 spares kit contains all the parts on the T830 series recommended spares list and is intended to provided enough spares to maintain a single installation of up to ten channels. Included in the kit are electrical and mechanical parts that are either unique to Tait equipment, hard to obtain or susceptible to damage or wear and tear. All parts are securely packed in clearly labelled screw top containers in a handy plastic carry case.Note:The kit does not contain standard chip capacitors or resistors.KS850 Spares KitThe KS850 spares kit contains all the parts on the T850 series recommended spares list and is intended to provided enough spares to maintain a single installation of up to ten channels. Included in the kit are electrical and mechanical parts that are either unique to Tait equipment, hard to obtain or susceptible to damage or wear and tear. All parts are securely packed in clearly labelled screw top containers in a handy plastic carry case.Note:The kit does not contain standard chip capacitors or resistors.KS880 Spares KitThe KS880 spares kit contains all the parts on the T880 series recommended spares list and is intended to provided enough spares to maintain a single installation of up to ten channels. Included in the kit are electrical and mechanical parts that are either unique to Tait equipment, hard to obtain or susceptible to damage or wear and tear. All partsare securely packed in clearly labelled screw top containers in a handy plastic carry case.Note:The kit does not contain standard chip capacitors or resistors.。

2．主要功能
装置的主要功能如下： ☆ 快切功能 ☆ 单操作功能 ☆ 逻辑测试功能 ☆ 保护功能 ☆ 启动后加速功能 ☆ 故障判别闭锁功能 ☆ 事件记录功能 ☆ 切换录波功能 ☆ 通讯、打印、GPS 对时等功能 2.1 快切功能说明 快切功能指的是 SID-8BT-A 具有快速完成工作电源和备用电源切换的功能。 装置可以完成不同原因启 动的切换，包括：事故切换、非正常工况切换及手动切换。每种切换都可选择不同的切换模式，并根据实 际需要分别选择不同的切换准则。 2.1.1 ☆ 切换启动原因说明 事故切换 事故切换由保护接点启动。保护启动接点可并接进线纵差保护、发电机、变压器或发-变组保护出 口接点。当事故切换启动后，先发跳工作电源开关指令，在切换条件满足时（或经用户延时）发 合备用电源开关命令。切换模式可以选择串联或同时。 ☆ 非正常工况切换
－－－－－－－－－－－－－－－－－－－－－－－－－－－－2－－－－－－－－－－－－－－－－－－－－－－－－ Tel：(0755)83416189 ,83663989 Fax：(0755)83663603 website：
我们致力推动世界电力技术的科技进步！
非正常切换是自动进行的，包括以下两种情况： 母线失压启动：当母线三个电压均低于整定值且时间大于所整定延时定值时，装置根据选定方 式进行串联或同时切换。 工作电源开关误跳启动：因各种原因（包括人为误操作）引起工作电源开关误跳开，装置选择串 联切换模式。 ☆ 手动切换 手动切换是手动操作启动，而后自动进行的。在检测到就地手动切换信号，或接收到远方切换 命令时，启动工作线路与备用线路之间的快速切换操作。切换模式可以选择串联、同时、并联自 动、并联半自动、并联失败转串联、并联失败转同时等切换中任意一种模式。 2.1.2 ☆ 切换模式说明 串联切换： 首先跳工作开关，在确定工作开关跳开后，再合备用开关。 ☆ 同时切换： 首先跳工作开关，在未确定工作开关是否跳开就发合备用开关命令，通过设定合闸延时定值，在 时间上保证工作开关先断开，备用开关后合上。若工作开关跳闸失败，将会造成工作电源与备用 电源同时供电的所谓环网运行情况。若系统不允许环网运行，则可在系统定值中，投解耦合功能 软压板，并设定解耦合时间定值，一旦发生环网运行工况，经过解耦合时间延时后，将刚合上的 开关跳开，断开合环点解除环网运行状态，实现去耦合功能。 ☆ 并联自动切换： 首先根据并联切换准则合备用开关，确定备用开关合上后，再自动跳开工作开关。并联切换准则 实际上就是严格的双侧电源同期准则。SID-8BT-A 同时支持差频同期和同频同期操作。注意此模 式只能应用于正常手动切换。 ☆ 并联半自动切换： 首先根据并联切换准则合备用开关，备用开关合上后，再由操作员手动跳开工作开关。注意此模 式只能应用于正常手动切换。 ☆ 并联失败转串联切换： 如果符合并联切换准则，按照并联自动模式进行切换；否则按照串联切换模式进行切换。注意此 模式只能应用于正常手动切换。 ☆ 并联失败转同时切换： 如果符合并联切换准则，按照并联自动模式进行切换；否则按照同时切换模式进行切换。注意此

VD = VDRM RL = 3.3 kΩ Tj = 125°C IT = 100 mA IG = 1.2 IGT
■
STANDARD (4 Quadrants)
Symbol Test Conditions Quadrant BTA/BTB08 C IGT (1) V D = 12 V VGT VGD IH (2) IL dV/dt (2) V D = VDRM RL = 3.3 kΩ Tj = 125°C IT = 500 mA IG = 1.2 IGT V D = 67 %VDRM gate open Tj = 125°C Tj = 125°C I - III - IV II MIN. MIN. RL = 30 Ω I - II - III IV ALL ALL MAX. MAX. MIN. MAX. MAX. 25 40 80 200 5 25 50 1.3 0.2 50 50 100 400 10 V/µs V/µs B 50 100 mA V V mA mA Unit
(dV/dt)c (2) (dI/dt)c = 3.5 A/ms
STATIC CHARACTERISTICS
Symbol VTM (2) Vto (2) Rd (2) I DRM I RRM
Note 1: minimum IGT is guaranted at 5% of IGT max. Note 2: for both polarities of A2 referenced to A1
Type Standard Snubberless Standard Snubberless Logic level Logic level Logic level Logic level Snubberless Snubberless Snubberless

BTA系列产品型号电流电压触发电流封装形式BTA06-400B 6A 400V 35~50mA TO-220ABBTA06-400BW 6A 400V 50mA TO-220ABBTA06-400C 6A 400V 25mA TO-220ABBTA06-400CW 6A 400V 35mA TO-220ABBTA06-400TW 6A 400V 5mA TO-220ABBTA06-400E 6A 400V 5~10mA TO-220ABBTA06-400D 6A 400V 1~5mA TO-220ABBTA06-400SAP 6A 400V 5~10mA TO-220BTA06-600B 6A 600V 35~50mA TO-220ABBTA06-600BW 6A 600V 50mA TO-220ABBTA06-600C 6A 600V 25mA TO-220ABBTA06-600CW 6A 600V 35mA TO-220ABTA06-600SW 6A 600V 10mA TO-220ABBTA06-600TW 6A 600V 5mA TO-220ABBTA06-600E 6A 600V 5~10mA TO-220ABBTA06-600D 6A 600V 1~5mA TO-220ABBTA06-600SAP 6A 600V 5~10mA TO-220ABBTA06-700B 6A 700V 35~50mA TO-220ABBTA06-700BW 6A 700V 50mA TO-220ABBTA06-700C 6A 700V 25mA TO-220ABBTA06-700CW 6A 700V 35mA TO-220ABBTA06-700SW 6A 700V 10mA TO-220ABBTA06-700TW 6A 700V 5mA TO-220ABBTA06-700E 6A 700V 5~10mA TO-220ABBTA06-700D 6A 700V 1~5mA TO-220ABBTA06-700SAP 6A 700V 5~10mA TO-220ABBTA06-800B 6A 800V 35~50mA TO-220ABBTA06-800BW 6A 800V 50mA TO-220ABBTA06-800C 6A 800V 25mA TO-220ABBTA06-800CW 6A 800V 35mA TO-220ABBTA06-800SW 6A 800V 10mA TO-220ABBTA06-800TW 6A 800V 5mA TO-220ABBTA06-800E 6A 800V 5~10mA TO-220ABBTA06-800D 6A 800V 1~5mA TO-220ABBTA06-800SAP 6A 800V 5~10mA TO-220ABBTA08-400B 8A 400V 35~50mA TO-220ABBTA08-400BW 8A 400V 50mA TO-220ABBTA08-400C 8A 400V 25mA TO-220ABBTA08-400CW 8A 400V 35mA TO-220ABBTA08-400SW 8A 400V 10mA TO-220ABBTA08-400TW 8A 400V 5mA TO-220ABBTA08-400E 8A 400V 5~10mA TO-220AB BTA08-400D 8A 400V 1~5mA TO-220ABBTA08-400SAP 8A 400V 5~10mA TO-220AB BTA08-600B 8A 600V 35~50mA TO-220AB BTA08-600BW 8A 600V 50mA TO-220AB BTA08-600C 8A 600V 25mA TO-220ABBTA08-600CW 8A 600V 35mA TO-220AB BTA08-600SW 8A 600V 10mA TO-220AB BTA08-600TW 8A 600V 5mA TO-220ABBTA08-600E 8A 600V 5~10mA TO-220AB BTA08-600D 8A 600V 1~5mA TO-220ABBTA08-600SAP 8A 600V 5~10mA TO-220AB BTA08-700B 8A 700V 35~50mA TO-220AB BTA08-700BW 8A 700V 50mA TO-220AB BTA08-700C 8A 700V 25mA TO-220ABBTA08-700CW 8A 700V 35mA TO-220AB BTA08-700SW 8A 700V 10mA TO-220AB BTA08-700TW 8A 700V 5mA TO-220ABBTA08-700E 8A 700V 5~10mA TO-220AB BTA08-700D 8A 700V 1~5mA TO-220ABBTA08-700SAP 8A 700V 5~10mA TO-220AB BTA08-800B 8A 800V 35~50mA TO-220AB BTA08-800BW 8A 800V 50mA TO-220AB BTA08-800C 8A 800V 25mA TO-220ABBTA08-800CW 8A 800V 35mA TO-220AB BTA08-800SW 8A 800V 10mA TO-220AB BTA08-800TW 8A 800V 5mA TO-220ABBTA08-800E 8A 800V 5~10mA TO-220AB BTA08-800D 8A 800V 1~5mA TO-220ABBTA08-800SAP 8A 800V 5~10mA TO-220A BTA08-1000B 8A 1000V 35~50mA TO-220AB BTA08-1000BW 8A 1000V 50mA TO-220AB BTA08-1000C 8A 1000V 25mA TO-220AB BTA08-1000CW 8A 1000V 35mA TO-220AB BTA08-1000SW 8A 1000V 10mA TO-220AB BTA08-1000TW 8A 1000V 5mA TO-220AB BTA08-1000E 8A 1000V 5~10mA TO-220AB BTA08-1000D 8A 1000V 1~5mA TO-220AB BTA08-1000SAP 8A 1000V 5~10mA TO-220ABBTA10-400B 10A 400V 35~50mA TO-220AB BTA12-400B 12A 400V 35~50mA TO-220AB BTA16-400B 16A 400V 35~50mA TO-220ABBTA24-600B 25A 600V 35~50mA TO-220ABBTA25-600B 25A 600V 35~50mA TO-220AB BTA25-600BW 25A 600V 50mA TO-220AB BTA26-600B 25A 600V 35~50mA TO-220AB BTA40-600B 40A 600V 35~50mA BTW67 BTA40-600BW 40A 600V 50mA BTW67BTA41-600B 40A 600V 35~50mA BTW67 BTA41-600BW 40A 600V 50mA BTW67BTA140-600 25A 600V 35mA TO-220ABBTA140-800 25A 800V 35mA TO-220ABBTA140B-500 25A 500V 35mA SOT-404BTA140B-600 25A 600V 35mA SOT-404BTA140B-800 25A 800V 35mA SOT-404BTA151-650R 12A 650V 4mA SOT82BTA204-600D 4A 600V 5mA TO-220ABBTA204-600E 4A 600V 10mA TO-220ABBTA204-600F 4A 600V 25mA TO-220ABBTA204-800E 4A 800V 10mA TO-220ABBTA204-600B 4A 600V 50mA TO-220AB BTA204-600C 4A 600V 35mA TO-220AB BTA204S-600B 4A 600V 50mA TO-252/D-PAK BTA204S-600C 4A 600V 35mA TO-252/D-PAK BTA204S-600D 4A 600V 5mA TO-252/D-PAK BTA204S-600E 4A 600V 10mA TO-252/D-PAK BTA204S-600F 4A 600V 25mA TO-252/D-PAK BTA204W-600D 1A 600V 5mA SOT223BTA204W-600E 1A 600V 10mA SOT223BTA204W-600F 1A 600V 25mA SOT223BTA204W-600B 1A 600V 50mA SOT223BTA204W-600C 1A 600V 35mA SOT223BTA204X-600D 4A 600V 5mA TO-220FP BTA204X-600E 4A 600V 10mA TO-220FP BTA204X-600F 4A 600V 25mA TO-220FP BTA208X-600D 8A 600V 5mA TO-220FP BTA208X-600E 8A 600V 10mA TO-220FP BTA208X-600F 8A 600V 25mA TO-220FP BTA208X-800E 8A 800V 10mA TO-220FP BTA208-600D 8A 600V 5mA TO-220ABBTA208-600E 8A 600V 10mA TO-220ABBTA208-600B 8A 600V 50mA TO-220ABBTA208-800B 8A 800V 50mA TO-220ABBTA208S-600B 8A 600V 50mA TO-252/D-PAK BTA208S-800B 8A 800V 50mA TO-252/D-PAK BTA208S-600D 8A 600V 5mA TO-252/D-PAK BTA208S-600E 8A 600V 10mA TO-252/D-PAK BTA208S-600F 8A 600V 25mA TO-252/D-PAK BTA208B-500B 8A 500V 50mA SOT-404BTA208B-600B 8A 600V 50mA SOT-404BTA208B-800B 8A 800V 50mA SOT-404BTA212X-600B 12A 600V 50mA TO-220FPBTA212X-800B 12A 800V 50mA TO-220FPBTA212X-600D 12A 600V 5mA TO-220FPBTA212X-600E 12A 600V 10mA TO-220FPBTA212X-600F 12A 600V 25mA TO-220FPBTA212X-800E 12A 800V 10mA TO-220FPBTA212X-600B 12A 600V 50mA TO-220FPBTA212X-800B 12A 800V 50mA TO-220FPBTA216X-600B 16A 600V 50mA TO-220FPBTA216X-800B 16A 800V 50mA TO-220FPBTA216X-600D 16A 600V 5mA TO-220FPBTA216X-600E 16A 600V 10mA TO-220FPBTA216X-600F 16A 600V 25mA TO-220FPBTA216-600B 16A 600V 50mA TO-220ABBTA216-800B 16A 800V 50mA TO-220ABBTA216-600D 16A 600V 5mA TO-220ABBTA216-600E 16A 600V 10mA TO-220ABBTA216-600F 16A 600V 25mA TO-220ABBTA225-600B 25A 600V 50mA TO-220ABBTA225-800B 25A 800V 50mA TO-220ABBTA225B-600B 25A 600V 50mA TO-263/D2-PAK BTA225B-800B 25A 800V 50mA TO-263/D2-PAKBTA04-400B 4A 400V 35~50mA TO-220BTA04-400BW 4A 400V 50mA TO-220BTA04-400C 4A 400V 25mA TO-220BTA04-400CW 4A 400V 35mA TO-220BTA04-400SW 4A 400V 10mA TO-220BTA04-400TW 4A 400V 5mA TO-220BTA04-400E 4A 400V 5~10mA TO-220BTA04-400D 4A 400V 1~5mA TO-220BTA04-400SAP 4A 400V 5~10mA TO-220BTA04-600B 4A 600V 35~50mA TO-220BTA04-600C 4A 600V 25mA TO-220AB BTA04-600CW 4A 600V 35mA TO-220AB BTA04-600SW 4A 600V 10mA TO-220AB BTA04-600TW 4A 600V 5mA TO-220AB BTA04-600E 4A 600V 5~10mA TO-220AB BTA04-600D 4A 600V 1~5mA TO-220AB BTA04-600SAP 4A 600V 5~10mA TO-220AB BTA04-700B 4A 700V 35~50mA TO-220AB BTA04-700BW 4A 700V 50mA TO-220AB BTA04-700C 4A 700V 25mA TO-220AB BTA04-700CW 4A 700V 35mA TO-220AB BTA04-700SW 4A 700V 10mA TO-220AB BTA04-700TW 4A 700V 5mA TO-220AB BTA04-700E 4A 700V 5~10mA TO-220AB BTA04-700D 4A 700V 1~5mA TO-220AB BTA04-700SAP 4A 700V 5~10mA TO-220AB BTA04-800B 4A 800V 35~50mA TO-220AB BTA04-800BW 4A 800V 50mA TO-220AB BTA04-800C 4A 800V 25mA TO-220AB BTA04-800CW 4A 800V 35mA TO-220AB BTA04-800SW 4A 800V 10mA TO-220AB BTA04-800TW 4A 800V 5mA TO-220AB BTA04-800E 4A 800V 5~10mA TO-220AB BTA04-800D 4A 800V 1~5mA TO-220AB BTA04-800SAP 4A 800V 5~10mA TO-220AB。