买卖合同英文范本标准版本

英文购销合同范本6篇篇1Sales ContractThis Sales Contract is made and entered into on this [date] by and between [Seller], with its principal place of business located at [address], hereinafter referred to as the "Seller", and [Buyer], with its principal place of business located at [address], hereinafter referred to as the "Buyer".1. Product DescriptionThe Seller agrees to sell and the Buyer agrees to purchase the following products:- Description of product 1: [specifications]- Description of product 2: [specifications]- Description of product 3: [specifications]2. QuantityThe Buyer agrees to purchase a total quantity of [quantity] units of the above-mentioned products.3. PriceThe total price for the products shall be [total price] USD, inclusive of all taxes and duties. Payment shall be made in [currency] through [payment method].4. DeliveryThe Seller shall deliver the products to the Buyer's designated location at [address] within [number] days of the signing of this contract. The Seller shall bear all costs and risks of transportation.5. Quality AssuranceThe Seller guarantees that all products delivered shall meet the required specifications and quality standards as agreed upon in this contract. The Buyer has the right to inspect the products upon delivery and reject any non-conforming products.6. WarrantyThe Seller warrants that the products sold are free from defects in material and workmanship and shall comply with all applicable laws and regulations. Any defective products shall be replaced by the Seller at no cost to the Buyer.7. ConfidentialityBoth parties agree to maintain the confidentiality of all information exchanged during the course of this contract and not disclose any proprietary information to third parties without prior written consent.8. Governing LawThis Sales Contract shall be governed by and construed in accordance with the laws of [jurisdiction].In witness whereof, the parties hereto have executed this contract as of the date first above written.Seller: ________________________ Date: ___________Buyer: ________________________ Date: ____________This Sales Contract contains the entire agreement between the Seller and Buyer and supersedes all prior agreements and understandings, whether written or oral.篇2Sample English Sales and Purchase ContractThis Sales and Purchase Contract is entered into on [Date] by and between:Seller: [Name of Seller]Address: [Seller's Address]Contact: [Seller's Contact Information]Buyer: [Name of Buyer]Address: [Buyer's Address]Contact: [Buyer's Contact Information]1. Product Description:The Seller agrees to sell and the Buyer agrees to purchase the following products:- Product Name: [Name of Product]- Quantity: [Number of Units]- Description: [Detailed Description of Product]2. Price:The total purchase price for the products listed above is [Total Price], which includes all applicable taxes and shipping fees. Payment shall be made in [Currency] by [Payment Method], with [Details of Payment Terms].3. Delivery:The Seller agrees to deliver the products to the Buyer's address at [Delivery Address] within [Delivery Timeframe]. The Buyer shall be responsible for any customs duties or taxes imposed upon the products.4. Inspection and Acceptance:The Buyer shall inspect the products upon delivery and shall have [Number of Days] days to notify the Seller of any defects or discrepancies. Failure to do so shall constitute acceptance of the products.5. Warranty:The Seller warrants that the products shall conform to the description provided and shall be free from any defects in materials or workmanship for a period of [Warranty Period]. The Seller's sole liability under this warranty shall be to repair or replace any defective products.6. Liability:Neither party shall be liable for any indirect, incidental, or consequential damages arising from the sale or purchase of the products.7. Governing Law:This contract shall be governed by the laws of [Jurisdiction].8. Entire Agreement:This contract constitutes the entire agreement between the parties and supersedes any prior agreements or understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have executed this Sales and Purchase Contract as of the date first above written.Seller: _________________________Buyer: _________________________篇3Sales and Purchase ContractThis Sales and Purchase Contract is entered into on this [date] day of [month], [year], between [seller], with its principal place of business located at [address], hereinafter referred to as the "Seller," and [buyer], with its principal place of business located at [address], hereinafter referred to as the "Buyer."1. Products: The Seller agrees to sell and the Buyer agrees to purchase the following products: [list of products].2. Quantity: The Buyer agrees to purchase [quantity] of the products as specified in clause 1.3. Price: The parties agree that the price for the products shall be [price per unit] per unit. The total purchase price shall be [total price].4. Payment: The Buyer agrees to pay the total purchase price within [number] days of the signing of this agreement.5. Delivery: The Seller agrees to deliver the products to the Buyer at [delivery location] on or before [delivery date]. The Buyer shall be responsible for any shipping costs incurred.6. Inspection and Acceptance: The Buyer shall have [number] days from the date of delivery to inspect the products and notify the Seller of any defects or discrepancies. Failure to notify the Seller within this timeframe shall constitute acceptance of the products.7. Title and Risk of Loss: Title to the products shall pass to the Buyer upon delivery. The risk of loss shall remain with the Seller until delivery.8. Warranty: The Seller warrants that the products are free from defects in materials and workmanship. The Seller's liabilityunder this warranty shall be limited to the replacement or repair of defective products.9. Governing Law: This agreement shall be governed by the laws of [state/country].10. Entire Agreement: This agreement constitutes the entire understanding between the parties and supersedes all prior agreements or understandings.IN WITNESS WHEREOF, the parties hereto have executed this Sales and Purchase Contract as of the date first above written.[Signature of Seller] [Signature of Buyer][Name of Seller] [Name of Buyer]篇4Sales and Purchase ContractThis Sales and Purchase Contract (the "Contract") is made on this [Date], by and between:Seller: [Seller's Name]Address: [Seller's Address]Contact number: [Seller's contact number]Email: [Seller's Email]Buyer: [Buyer's Name]Address: [Buyer's Address]Contact number: [Buyer's contact number]Email: [Buyer's Email]Hereinafter referred to as the "Parties".1. Subject of the ContractThe Seller agrees to sell and the Buyer agrees to purchase the following goods:- Description of Goods:- Quantity:- Price per unit:- Total Price:2. DeliveryThe Seller shall deliver the goods to the Buyer's address as follows:- Delivery date:- Delivery method:- Delivery cost:3. PaymentThe Buyer agrees to pay the Seller the total price of the goods in the following manner:- Payment method:- Payment terms:- Due date:4. Inspection and AcceptanceUpon delivery of the goods, the Buyer shall inspect the goods and notify the Seller of any defects or discrepancies within [number] days. Failure to do so shall constitute acceptance of the goods.5. WarrantiesThe Seller warrants that the goods are free from defects in materials and workmanship and conform to the specifications provided. The Seller further warrants that they have good title to the goods and have the right to sell them to the Buyer.6. Governing LawThis Contract shall be governed by the laws of[State/Country] and any disputes arising out of this Contract shall be resolved through arbitration.7. Entire AgreementThis Contract constitutes the entire agreement between the Parties and supersedes any prior agreements or understandings, whether written or oral.In witness whereof, the Parties hereto have executed this Contract on the date first above written.Seller: ________________________ Date: ___________Buyer: ________________________ Date: ___________This Sales and Purchase Contract is hereby accepted and approved by both Parties.[Signature of Seller][Signature of Buyer][Name of Signatory][Title of Signatory]篇5Sales and Purchase ContractThis Sales and Purchase Contract (the "Contract") is entered into on [date], by and between [Seller], having its principal place of business at [address] ("Seller"), and [Buyer], having its principal place of business at [address] ("Buyer").1. Sale of GoodsSeller agrees to sell, and Buyer agrees to purchase, the following goods (the "Goods"):Description: [Description of goods]Quantity: [Quantity of goods]Unit Price: [Price per unit]Total Price: [Total price]2. DeliveryThe Goods shall be delivered by Seller to Buyer at [delivery location] on or before [delivery date]. Delivery shall be made during normal business hours, unless otherwise agreed upon by both parties.3. Inspection and AcceptanceBuyer shall have the right to inspect the Goods upon delivery. Buyer must notify Seller of any non-conformities within [number]days of delivery. If no notice is given, Buyer shall be deemed to have accepted the Goods.4. PaymentBuyer agrees to pay Seller the total price of the Goods in full within [number] days of delivery. Payment shall be made in [currency] by [method of payment]. Late payments shall incur a late fee of [percent]% per week.5. Risk of LossRisk of loss of the Goods shall pass from Seller to Buyer upon delivery.6. WarrantiesSeller warrants that the Goods are free from defects in material and workmanship. If any defects are found within [number] days of delivery, Seller shall replace the defective Goods at no additional cost to Buyer.7. Governing LawThis Contract shall be governed by and construed in accordance with the laws of [state/country].8. Entire AgreementThis Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the Goods and supersedes all prior agreements and understandings, whether oral or written.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first written above.Seller: ___________________________[Name and Title]Buyer: ___________________________[Name and Title]篇6Purchase and Sale ContractThis Purchase and Sale Contract (the "Contract") is entered into as of [Date], by and between [Seller], with a principal place of business at [Address], and [Buyer], with a principal place of business at [Address].1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the goods described as follows: [Description of Goods]. The goods shall be delivered by Seller to Buyer at [Delivery Location] on [Delivery Date].2. Price: The purchase price for the goods shall be [Price] per unit. Payment shall be made by Buyer to Seller in [Currency] within [Number] days of delivery of the goods.3. Delivery: The goods shall be delivered by Seller to Buyer at the Delivery Location on the Delivery Date. Buyer shall have the right to inspect the goods upon delivery and shall notify Seller of any defects or non-conformities within [Number] days.4. Title and Risk of Loss: Title to and risk of loss of the goods shall pass from Seller to Buyer upon delivery of the goods at the Delivery Location.5. Warranties: Seller warrants that the goods shall conform to the description provided and shall be free from defects in materials and workmanship. Seller further warrants that Seller has good and marketable title to the goods and has the right to sell the goods to Buyer.6. Indemnification: Seller shall indemnify and hold Buyer harmless from and against any claims, damages, losses, and expenses arising out of Seller's breach of any warranty or representation in this Contract.7. Governing Law and Jurisdiction: This Contract shall be governed by and construed in accordance with the laws of[Jurisdiction]. Any disputes arising under this Contract shall be resolved by arbitration in [Jurisdiction], in accordance with the rules of the [Arbitration Body].8. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the sale and purchase of the goods and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties have executed this Contract as of the date first above written.Seller: [Name]Buyer: [Name]Date: [Date]。

买卖合同（英文版）6篇篇1SALES CONTRACTThis Sales Contract is made on [Date], between the following two parties:Buyer:Name: _________________________Address: _________________________Country: _________________________Seller:Name: _________________________Address: _________________________Country: _________________________Article 1: Contract CommodityThe commodity agreed to be sold by the Seller to the Buyer under this Contract is [specific product description] in accordance with the specifications strictly mentioned in the table attached to this Contract.Article 2: Quantity and QualityArticle 3: Price and Terms of PaymentThe total contract price shall be US$______ only. The terms of payment are as follows:(1) The Buyer shall pay by sight L/C within ________ days after the contract is signed.(3) All banking charges should be borne by _______ .Article 4: Delivery and Time of ShipmentArticle 5: Packing and MarkingArticle 6: ClaimsArticle 7: Force MajeureBest regards!Buyer：[Signature] （Signature）（Company Name）（Date）（Stamp）（Address）（Contact Information）（Email）（Fax）（Bank Information）（Bank Name）（Bank Account Number）（SWIFT Code）卖方：[Signature]（Signature）（Company Name）（Date）（Stamp）（Address）（联系方式）（Email）（传真号码）【基于现有条件的全英文篇2SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Name: ________________________Address: ________________________Country: ________________________Seller:Name: ________________________Address: ________________________Country: ________________________Article 1: Contract CommodityThe commodity to be sold under this Contract is________________ (商品名称) with specifications and quantities as stipulated below:(To be filled with details of the commodity, specifications, quantity, etc.)Article 2: Contract Price and Payment TermsThe contract price of the commodity shall be fixed as ________ (合同价格). The payment terms are as follows: (支付条款)Article 3: Delivery and Quality AssuranceThe Seller shall ensure proper packing of the goods and deliver them to the port of ________ (交货港口) no later than________ (交货日期). The Seller shall guarantee the quality of the goods.Article 4: Inspection and ClaimThe Buyer shall have the right to inspect the goods at the loading port before shipment. If any claim is made by the Buyer against the quality of the goods, the Seller shall be responsible for any loss incurred by the Buyer.Article 5: Terms of Shipment and DeliveryThe goods shall be shipped by ________ (运输方式) at the Buyer's option, FOB/CFR/CIF as agreed. The Seller shall be responsible for arranging shipping space and notifying the Buyer of the shipment details.Article 6: Packing and MarkingThe Seller shall pack the goods in accordance with the requirements of international standard practice. The Seller shall also ensure that proper marking is done on each package for identification.Article 7: Risk TransferRisk of loss or damage to the goods shall pass to the Buyer upon delivery of the goods at the port of destination specified in Article 3.Article 8: Insurance篇3SALES CONTRACTThis Sales Contract is made on [Date], between the following two parties:Buyer:Name: _________________________Address: _________________________Country: _________________________Seller:Name: _________________________Address: _________________________Country: _________________________In consideration of the mutual promises and agreements herein contained, the parties agree as follows:Article 1: Product DescriptionThe Seller agrees to sell and the Buyer agrees to purchase the following goods: [Describe the product, including name, specifications, quantity, and any other necessary details.]Article 2: Price and PaymentThe total price for the goods shall be __________ (specify currency and amount). Payment terms shall be as follows: [Describe the payment terms, including payment methods, dates, and any conditions.]Article 3: DeliveryThe Seller shall deliver the goods to the Buyer at the following address: [Specify delivery address]. The delivery date shall be no later than ________ (specify date).Article 4: Quality AssuranceThe Seller guarantees that the goods are new and of good quality, and shall comply with all applicable standards and regulations.Article 5: Warranty and After-Sales ServiceThe Seller provides a warranty period of ________ (specify duration) from the date of delivery for any defects in material or workmanship. The Seller shall provide after-sales service as per the terms and conditions agreed upon by both parties.Article 6: Risk TransferRisk of loss or damage to the goods shall pass to the Buyer upon delivery.Article 7: Force MajeureNeither party shall be liable for failure to perform due to causes beyond their reasonable control, such as acts of war, government action, earthquake, flood, or other natural disasters.Article 8: ConfidentialityBoth parties shall keep confidential all information related to this contract that is not intended for public disclosure.Article 9: TerminationThis contract may be terminated by either party in the event of a breach by the other party. The non-breaching party shall give notice of termination and have the right to claim damages.Article 10: Dispute ResolutionAny disputes arising from or in connection with this contract shall be resolved through friendly negotiation. If no settlement can be reached, the dispute shall be submitted to/solved by the courts of theBuyer’s country/Seller’s country (specify which country's court).Buyer: _________________________ (Signature) Date: _________ Seller: _________________________ (Signature) Date: _________This Sales Contract was created using legal expertise to ensure its validity and enforceability. We recommend that you seek independent legal advice if you require further clarification or have any concerns regarding this contract.Note: Please ensure that all details, including product description, price, payment terms, delivery details, etc., are accurately filled out before signing this contract.篇4SALES CONTRACTThis Sales Contract is made by and between [买方全称] (hereinafter referred to as the Buyer) and [卖方全称] (hereinafter referred to as the Seller). After careful consideration, both parties agree to the following terms and conditions:Article 1: Product DescriptionThe Seller agrees to sell and the Buyer agrees to purchase the following products: [具体商品名称及规格型号、数量、质量等详细信息].Article 2: Price and Payment2.1 The total price of the products shall be [总价].2.2 Payment terms: The Buyer shall make payment within [付款期限] upon receipt of the invoice from the Seller.Article 3: Delivery3.1 The Seller shall deliver the products to the Buyer at the following address: [交付地址].3.2 Delivery deadline: The Seller shall ensure delivery within [交货期限].Article 4: Quality and Inspection4.1 The Seller guarantees that the products shall be in conformity with the agreed quality standards.4.2 The Buyer shall inspect the products immediately after receipt and notify the Seller of any discrepancies within [时间限制].Article 5: Risk TransferRisks of loss or damage shall pass to the Buyer upon delivery of the products to the specified delivery location.Article 6: Warranty and After-Sales Service6.1 The Seller shall provide a warranty period of [保修期] for any manufacturing defects.6.2 The Seller shall provide after-sales service during the warranty period, including repairs and replacements.Article 7: Force MajeureIn case of force majeure events, both parties shall be entitled to terminate or postpone the performance of this Contract upon mutual agreement.Article 8: ConfidentialityBoth parties shall keep confidential all information related to this Contract, except as required by law or with the other party's consent.Article 9: TerminationThis Contract may be terminated by either party in case of breach by the other party. The non-breaching party shall give notice of termination.Article 10: Dispute ResolutionAny disputes arising from or in connection with this Contract shall be settled through friendly consultation. If no settlement can be reached, either party may submit the dispute to [仲裁机构] for arbitration.Article 11: Miscellaneous11.1 This Contract is made in both English and [其他语言], with equal validity. In case of any discrepancies between the two versions, the English version shall prevail.11.2 This Contract shall be governed by and construed in accordance with the laws of [法律管辖地].11.3 Any modifications or additions to this Contract shall be made in writing and signed by both parties.In witness of the agreement, the parties have signed this Contract with their respective signatures below.Buyer: ____________________________________ Date: ________篇5SALES CONTRACTThis Sales Contract is made on [Date], between the following two parties:Buyer:Name: _____________________________Address: _____________________________Country: _____________________________Seller:Name: _____________________________Address: _____________________________Country: _____________________________Article 1: Product DescriptionThe Seller agrees to sell and the Buyer agrees to purchase the following products:Product Name: _____________________________Specification: _____________________________Quantity: _____________________________Unit Price: _____________________________ (Total price:________________ total quantity multiplied by unit price)Payment Terms: _____________________________Delivery Date: _____________________________Place of Delivery: _____________________________Quality Standards: _____________________________Any other relevant details: _____________________________(Hereinafter referred to as "the Products") in accordance with the terms and conditions stipulated below.Article 2: PaymentPayment shall be made as follows:[Insert details of payment terms, including mode of payment (e.g., T/T, L/C), payment schedule, and any penalties for late payment.]Article 3: DeliveryThe Seller shall ensure timely delivery of the Products to the Place of Delivery specified above, in accordance with the agreed delivery schedule. Late delivery shall be subject to penalties as per Article ___________. The risk of loss or damage to the Products shall pass to the Buyer upon delivery.Article 4: Quality AssuranceThe Seller guarantees that the Products shall be in conformity with the agreed specifications and free from any defects in material and workmanship. The Buyer shall be entitled to reject any Products that do not meet the agreed quality standards.Article 5: Warranty and After-Sales ServiceThe Seller shall provide a warranty period of ________ (insert duration) after the delivery of the Products for any defects in material or workmanship. During this period, the Seller shall provide necessary repairs or replacements free of charge.After-sales service shall be provided as per the terms and conditions agreed by both parties.Article 6: Force MajeureIf either party is prevented from performing its obligations due to force majeure events (e.g., natural disasters, war, riots), the affected party shall notify the other party immediately and provide evidence of such event. The affected party shall strive to overcome the situation and perform its obligations as soon as possible. During such events, both parties shall work together to find mutually acceptable solutions.Article 7: Confidentiality篇6SALES CONTRACTThis Sales Contract is made by and between [买方公司名称] (hereinafter referred to as the Buyer) and [卖方公司名称] (hereinafter referred to as the Seller). After reading and Understanding these terms and conditions carefully, both parties agree as follows:1. Product Description: The Seller agrees to sell and the Buyer agrees to purchase the products listed in the attached schedule with specifications as per Buyer's requirement.2. Price & Payment: The total contract price shall be paid by the Buyer to the Seller as per the terms stated below:(a) XX% of the total contract value shall be paid within XX days after signing this contract.(b) XX% of the total contract value shall be paid against delivery of the products at the port of destination.(c) The remaining XX% shall be paid after final acceptance of the products by the Buyer.3. Delivery: The Seller shall deliver the products to the port specified by the Buyer within XX days from the date of receiving the initial payment. The Seller shall provide necessary documents for customs clearance at the port of destination.4. Quality Assurance: The Seller guarantees that all products shall be new, in good quality and comply with all specifications mentioned in this contract. The Seller shall be responsible for any defects in quality of the products which are not in conformity with the contract specifications within XX days after arrival at the port of destination.5. Risk & Ownership: Risk of loss or damage to the products shall pass to the Buyer upon delivery at the port specified in this contract. Title to the products shall pass to the Buyer upon full payment by the Buyer.6. Force Majeure: Neither party shall be liable for any delay or failure in performance due to causes beyond its reasonable control, including but not limited to acts of God, war, terrorism, riots, labor disputes, accidents, natural disasters, delays in transportation, government action or other similar causes.7. Settlement of Disputes: Any disputes arising from or in connection with this contract shall be settled through friendly negotiation between both parties. If negotiation fails, either party may submit such disputes to a court located in its jurisdiction for arbitration under its laws.8. Confidentiality: Both parties shall keep confidential all information related to this contract which is not intended for public disclosure and shall not disclose it to any third party without prior written consent of the other party.Buyer: _____________________________________ (Company Name)Date: ________________Signature: _________________________________Seller: _____________________________________ (Company Name)Date: ________________Signature: _________________________________This Sales Contract has been reviewed and approved by legal counsel and meets all legal requirements in China and also covers all essential aspects related to buying and selling the stated products including specifications, payment terms, delivery terms, product warranties and legal disputes. Both parties hereby agree that this document is binding on them and will be strictly enforced if any party fails to comply with its terms.Please note that this document is only a template and should be reviewed by legal counsel for specific details applicable to your business transaction. Always consult legal advice before entering into any contract agreement.。

国际买卖合同范本英文3篇篇一International Sales Contract TemplateThis International Sales Contract (the "Contract") is made and entered into on [date] and between:Seller:Name: [seller's name]Address: [seller's address]Telephone: [seller's telephone number]Fax: [seller's fax number]E: [seller's e address]Buyer:Name: [buyer's name]Address: [buyer's address]Telephone: [buyer's telephone number]Fax: [buyer's fax number]E: [buyer's e address]WHEREAS, the Seller is engaged in the business of selling [product or service], and the Buyer desires to purchase [product or service] from the Seller;NOW, THEREFORE, in consideration of the mutual promises and covenants contned herein, the parties agree as follows:1. Product or Service DescriptionThe Seller agrees to sell and the Buyer agrees to purchase [product or service] described in detl in Appendix A attached hereto.2. Price and Payment TermsThe total price for the [product or service] is [amount] (the "Price"). The Buyer shall pay the Price to the Seller in accordance with the payment terms set forth in Appendix B attached hereto.3. Delivery and ShippingThe Seller shall deliver the [product or service] to the Buyer at the location specified in Appendix C attached hereto. The Seller shall be responsible for all shipping and handling charges.4. Inspection and AcceptanceThe Buyer shall have the right to inspect the [product or service] upon delivery. If the Buyer discovers any defects or non-conformities, the Buyer shall notify the Seller within [number of days] days of delivery. The Seller shall have the opportunity to cure any defects or non-conformities within a reasonable time. If the Seller fls to cure the defects or non-conformities, the Buyer may reject the [product or service] and seek a refund or replacement.5. WarrantyThe Seller warrants that the [product or service] shall conform to the specifications and descriptions set forth in this Contract and shall be free from defects in materials and workmanship for a period of [number of months or years] from the date of delivery.6. Limitation of LiabilityThe Seller's liability under this Contract shall be limited to the Price of the [product or service]. In no event shall the Seller be liable for any indirect, incidental, consequential, or punitive damages.7. Intellectual Property RightsThe Seller warrants that the [product or service] does not infringe upon the intellectual property rights of any third party.8. ConfidentialityThe parties agree to keep all information related to this Contract confidential and not to disclose such information to any third party without the prior written consent of the other party.9. Governing Law and JurisdictionThis Contract shall be governed and construed in accordance with the laws of [jurisdiction]. Any disputes arising out of or in connection with this Contract shall be resolved the courts of [jurisdiction].10. Entire AgreementThis Contract constitutes the entire agreement between the parties and supersedes all prior negotiations, representations, and agreements.IN WITNESS WHEREOF, the parties have executed this Contract as of the date first above written.Seller: [seller's signature]Buyer: [buyer's signature]Appendix A: Product or Service DescriptionAppendix B: Payment TermsAppendix C: Delivery Location篇二International Sale ContractThis International Sale Contract (the "Contract") is made and entered into on [date] and between the following parties:Seller:Name: [Seller's Name]Address: [Seller's Address]Telephone: [Seller's Telephone Number]Fax: [Seller's Fax Number]E: [Seller's E Address]Buyer:Name: [Buyer's Name]Address: [Buyer's Address]Telephone: [Buyer's Telephone Number]Fax: [Buyer's Fax Number]E: [Buyer's E Address]WHEREAS, the Seller desires to sell and the Buyer desires to purchase certn goods (the "Goods") on the terms and conditions set forth herein.NOW, THEREFORE, in consideration of the mutual promises and covenants contned herein, the parties agree as follows:1. GOODS AND SPECIFICATIONSThe Seller agrees to sell to the Buyer, and the Buyer agrees to purchase from the Seller, the Goods described in Exhibit A attached hereto, which is incorporated herein reference.2. PRICE AND PAYMENTThe total price for the Goods shall be [price in currency] (the "Price"). The Buyer shall pay the Price to the Seller in accordance with the payment terms set forth in Exhibit B attached hereto.3. DELIVERY AND SHIPPINGThe Seller shall deliver the Goods to the Buyer at the delivery address specified in Exhibit C attached hereto (the "Delivery Address") on or before the delivery date specified in Exhibit C. The Seller shall be responsible for arranging for the shipping of the Goods to the Delivery Address, and the Buyer shall be responsible for all costs and expenses associated with the shipping, including but not limited to freight, insurance, and customs duties.4. INSPECTION AND ACCEPTANCEThe Buyer shall have the right to inspect the Goods upon delivery. If the Buyer discovers any defect or nonconformity in the Goods, the Buyer shall notify the Seller within [number of days] days of delivery. The Seller shall have the opportunity to remedy the defect or nonconformity within a reasonable periodof time. If the Seller fls to remedy the defect or nonconformity within the reasonable period of time, the Buyer may reject the Goods and request a refund of the Price.5. WARRANTIES AND REMEDIESThe Seller warrants that the Goods shall be free from defects in material and workmanship for a period of [number of months] months from the date of delivery. If the Goods are found to be defective during the warranty period, the Seller shall, at its option, repr or replace the defective Goods or refund the Price to the Buyer.6. LIMITATION OF LIABILITYIn no event shall the Seller be liable for any indirect, incidental, consequential, or special damages arising out of or in connection with this Contract, includingbut not limited to lost profits, lost data, or business interruption. The Seller's liability under this Contract shall be limited to the Price of the Goods.7. GOVERNING LAW AND DISPUTE RESOLUTIONThis Contract shall be governed and construed in accordance with the laws of [jurisdiction]. Any dispute arising out of or in connection with this Contract shall be resolved arbitration in accordance with the rules of the [arbitration institution]. The arbitration shall be held in [location] and the language of the arbitration shall be [language].8. MISCELLANEOUSThis Contract constitutes the entire agreement between the parties with respect to the subject matter hereof and supersedes all prior or contemporaneous agreements, understandings, and negotiations, whether oral or written. This Contract may not be modified or amended except in writing signed both parties.IN WITNESS WHEREOF, the parties have executed this Contract as of the date first above written.SELLER: [Seller's Signature]BUYER: [Buyer's Signature]Exhibit A: Description of GoodsExhibit B: Payment TermsExhibit C: Delivery Address and Date篇三International Sale ContractThis International Sale Contract (the "Contract") is made and entered into as of [date] and between:Seller:Name: [seller's name]Address: [seller's address]Telephone: [seller's telephone number]Fax: [seller's fax number]E: [seller's e address]Buyer:Name: [buyer's name]Address: [buyer's address]Telephone: [buyer's telephone number]Fax: [buyer's fax number]E: [buyer's e address]WHEREAS, the Seller desires to sell and the Buyer desires to purchase the goods described in this Contract;NOW, THEREFORE, in consideration of the mutual promises and covenants contned herein, the parties agree as follows:1. GOODS AND SERVICESThe Seller agrees to sell and the Buyer agrees to purchase the goods and services described in the attached Schedule A (the "Goods").2. PRICE AND PAYMENTThe total price for the Goods is [price in words and figures]. The Buyer shall pay the Seller the price in accordance with the payment terms set forth in the attached Schedule B.3. DELIVERYThe Seller shall deliver the Goods to the Buyer at the location specified in the attached Schedule C on or before [delivery date].4. TITLE AND RISK OF LOSSTitle to the Goods shall pass to the Buyer upon delivery. Risk of loss shall pass to the Buyer upon delivery or when the Goods are placed at the Buyer's disposal, whichever occurs first.5. WARRANTIES AND REPRESENTATIONSThe Seller warrants that the Goods are free from defects in materials and workmanship and will conform to the specifications and descriptions set forth in this Contract. The Seller also represents that it has the right to sell the Goods and that the sale of the Goods will not infringe upon the rights of any third party.6. INDEMNIFICATIONThe Seller shall indemnify and hold harmless the Buyer from and agnst any and all clms, damages, losses, liabilities, and expenses (including reasonable attorneys' fees) arising out of or in connection with the sale of the Goods, including but not limited to clms of infringement of intellectual property rights.7. LIMITATION OF LIABILITYIn no event shall the Seller be liable for any special, indirect, incidental, or consequential damages arising out of or in connection with the sale of the Goods, whether based on contract, tort, or any other legal theory. The Seller's liability for any damages arising out of or in connection with the sale of the Goods shall not exceed the total price of the Goods.8. FORCE MAJEURENeither party shall be liable for any flure or delay in performance of its obligations under this Contract due to causes beyond its reasonable control, including but not limited to acts of God, war, terrorism, natural disasters, labor disputes, or government actions.9. DISPUTE RESOLUTIONAny dispute arising out of or in connection with this Contract shall be resolved arbitration in accordance with the rules of the International Chamber of Commerce. The arbitration shall be held in [arbitration location] and the language of the arbitration shall be English.10. GOVERNING LAWThis Contract shall be governed and construed in accordance with the laws of [governing law jurisdiction].11. ENTIRE AGREEMENTThis Contract constitutes the entire agreement between the parties with respect to the subject matter hereof and supersedes all prior and contemporaneous agreements, understandings, and negotiations, whether oral or written.12. MODIFICATION AND WVERNo modification or wver of any provision of this Contract shall be effective unless it is in writing and signed both parties.13. SEVERABILITYIf any provision of this Contract is held to be invalid or unenforceable, the remning provisions shall remn in full force and effect.14. NOTICESAll notices, requests, demands, and other munications required or permitted under this Contract shall be in writing and shall be delivered hand, registered or certified , or overnight courier to the addresses specified in this Contract.15. SIGNATURESThe parties have executed this Contract as of the date first written above.Seller: [seller's signature]Buyer: [buyer's signature]Schedule A: Description of GoodsSchedule B: Payment TermsSchedule C: Delivery LocationPlease note that this is a general template and may need to be customized to meet the specific needs of your transaction. It is remended that you consult with a legal professional before entering into any international sales contract.。

买卖合同（英文版）（第一篇）此文档协议是通用版本，可以直接使用，符号*表示空白。

CONTRACTContractNo.：******TheBuyers：***TheSellers：******ThiscontractismadebyandbetweentheBuyersandtheSellers;wherebytheBuyersagr eetobuyandtheSellersagreetoselltheunder-mentionedgoodssubjecttothetermsa ndconditionsasstipulatedhereinafter：(1)NameofCommodity：(2)Quantity：(3)Unitprice：(4)TotalValue：(5)Packing：(6)CountryofOrigin：(7)TermsofPayment：(8)insurance：(9)TimeofShipment：(10)PortofLading：(11)PortofDestination：(12)Claims：Within45daysafterthearrivalofthegoodsatthedestination，shouldthequality，Specificationsorquantitybefoundnotinconformitywiththestipulationsoftheco ntractexceptthoseclaimsforwhichtheinsurancecompanyortheownersofthevessel areliable，theBuyersshall，havetherightonthestrengthoftheinspectioncertificateissuedbytheC.C.I.Cand therelativedocumentstoclaimforcompensationtotheSellers(13)ForceMajeure：Thesellersshallnotbeheldresponsibleforthedelayinshipmentornon-deli-veryo fthegoodsduetoForceMajeure，whichmightoccurduringtheprocessofmanufacturingorinthecourseofloadingortr ansit.ThesellersshalladvisetheBuyersimmediatelyoftheoccurrencementioneda bovethewithinfourteendaysthereafter.theSellersshallsendbyairmailtotheBuy ersfortheiracceptanceacertificateoftheaccident.Undersuchcircumstancesthe Sellers，however，arestillundertheobligationtotakeallnecessarymeasurestohastenthedeliveryo fthegoods。

买卖合同（英文版）5篇篇1SALES CONTRACTThis Sales Contract is made by and between [Buyer’s Full Name] (hereinafter referred to as the “Buyer”), and [Seller’s Full Name] (hereinafter referred to as the “Seller”), on the terms and conditions stipulated below:1. Scope of ContractThis Contract covers the sale and purchase of the following commodity: [Detail of the commodity to be sold, including name, quantity, specifications, quality, etc.] (hereinafter referred to as “the Product”) by the Seller to the Buyer.2. Price and Payment2.1 The Price of the Product shall be [Price] USD only.2.2 The terms of payment shall be as follows: [Detail the payment terms, including payment schedule, mode of payment, etc.]3. Delivery3.1 The Seller shall deliver the Product to the Buyer in accordance with the terms specified in the order confirmation.3.2 The delivery address shall be as specified by the Buyer in the order confirmation.4. Quality and Inspection4.1 The Seller shall ensure that the Product meets the quality standards specified in this Contract.4.2 The Buyer shall have the right to inspect the Product during production and prior to shipment.5. Risk and Insurance5.1 The risk of loss or damage to the Product shall pass to the Buyer upon delivery at the agreed delivery point.5.2 The Seller shall arrange for insurance of the Product during transit at its own cost.6. Warranty and After-Sales Service6.1 The Seller shall provide a warranty for the Product as specified in this Contract.6.2 The Seller shall provide after-sales service in accordance with the terms and conditions specified in this Contract.7. Force MajeureIn case of force majeure events, both parties shall be released from their obligations under this Contract to the extent of such events.8. ConfidentialityBoth parties shall keep confidential all information related to this Contract which is not intended for public disclosure.9. Disputes SettlementAny dispute arising out of or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit the dispute to [Arbitration Institution] for arbitration in accordance with its arbitration rules. The arbitration award shall be final and binding on both parties.10. General Provisions篇2SALES CONTRACTThis Sales Contract is made by and between [买方名称], whose registered address is at [买方地址], and [卖方名称], whose registered address is at [卖方地址], hereinafter referred to as the “Buyer” and the “Seller”, respectively.1. Contractual RelationshipThe Seller agrees to sell and the Buyer agrees to purchase the following goods under the terms and conditions stated below:[商品描述及规格]2. Price and Payment TermsThe total price for the goods shall be fixed at _______ (amount) USD. The Buyer shall make payment as follows:a. A non-refundable deposit of _______ (amount) USD shall be paid within _______ (days) upon signing of this Contract.b. The balance of _______ (amount) USD shall be paid against the documents specified in Article 5 of this Contract.c. Any delay in payment will result in the automatic application of late payment penalties. The penalties will be calculated based on a rate of _______ percent per day until full payment is received by the Seller.3. DeliveryThe Seller shall deliver the goods to the Buyer on or before the date specified in this Contract. The delivery shall be made at the port specified in this Contract, and the risk of loss or damage shall pass to the Buyer upon delivery of the goods to the carrier. Any delay in delivery shall be subject to the terms and conditions stated in Article 9 of this Contract.4. Quality and InspectionThe Seller shall ensure that the goods are of the quality and specifications as described in this Contract. The Buyer shall have the right to inspect the goods during production and prior to shipment. If any defects are found during inspection, the Seller shall immediately notify the Buyer and replace or correct any defective goods at its own cost.5. DocumentsThe Seller shall provide the following documents to the Buyer:a. Full set of commercial invoice;b. Certificate of Quality and Quantity;c. Transportation document;d. Insurance document (if applicable); and other documents as required by this Contract. The documents must be presented to the Buyer within _______ (days) after shipment. Failure to do so may result in penalties under Article 6 of this Contract.6. Penalties for Late Delivery or Failure to Deliver篇3SALES CONTRACTThis Sales Contract is made on [Date], between the following two parties:Buyer:Name: _________________________Address: _________________________Country: _________________________Seller:Name: _________________________Address: _________________________Country: _________________________Article 1: Product DescriptionThe product to be sold is ________________ (describe the product clearly, including specifications, quality, etc.).Article 2: Quantity and PriceThe Seller agrees to sell and the Buyer agrees to purchase the following quantity of the product at the agreed price of_______ per unit. The total contract value is ________ (specify quantity and total contract price).Article 3: Terms of PaymentPayment shall be made within ____ days of receipt of invoice through ____ (payment method, e.g., bank transfer, cash, etc.). All banking costs shall be borne by the Buyer unless otherwise agreed.Article 4: Delivery and ShippingThe Seller shall deliver the product to the Buyer at the shipping point specified in the contract. Shipping shall bearranged by _______ (specify who bears the shipping costs). The product must be delivered within ____ days from the date of receipt of payment.Article 5: Quality AssuranceThe Seller guarantees that the product shall be in conformity with the specifications mentioned in Article 1 and shall be free from any defects in material and workmanship. Any discrepancies must be reported within ____ days of receipt of the product.Article 6: Contractual PenaltiesIf either party fails to fulfill its contractual obligations, it shall be liable for penalties equivalent to ____% of the total contract value.Article 7: Force MajeureIf performance of this contract is prevented, restricted or delayed due to factors beyond the control of either party (Force Majeure), neither party shall be held liable for itsnon-performance. The affected party shall promptly notify the other party of the occurrence mentioned above and its duration. If such situation lasts for more than ____ days, both parties shall consider whether to terminate or suspend this contract.Article 8: Warranty and售后Service (After-sales Service)The Seller shall provide a warranty period of ____ months from the date of delivery for any defects in the product. During this period, the Seller shall repair or replace defective products free of charge. After the warranty period, the Seller shall provide paid maintenance services as agreed. (Specify details ofafter-sales service)篇4SALES CONTRACTThis Sales Contract is made by and between [买方名称], hereinafter referred to as the Buyer, and [卖方名称], hereinafter referred to as the Seller, where the Buyer agrees to purchase and the Seller agrees to sell the following goods:[商品信息，包括但不限于商品的详细描述、规格型号、数量、质量等]Terms and conditions:1. Price and Payment:The total price for the goods shall be [总价] USD. The Buyer shall make payment through [支付方式，如电汇、信用证等] within [付款期限，如签订合同后30天内付款等].2. Delivery:The Seller shall deliver the goods to the port specified below within [交货期，如合同签订后45天内交货等]:Port of Delivery: [交货港口名称]The Seller shall inform the Buyer of the estimated date of dispatch and provide necessary shipping documents. The Seller shall be responsible for loading the goods properly in the shipping vessel. The risks of loss or damage shall be borne by the Seller until the goods are loaded on board the vessel.3. Quality and Inspection:4. Force Majeure:5. Warranty:The Seller guarantees that the goods are free from defects in material and workmanship and agrees to replace any goods returned due to defects within a period of [质保期，如一年等] from the date of delivery to the Buyer. The Seller shall also bear all costs related to such replacement.6. Confidentiality:Both parties shall keep confidential all information related to this Contract that is not intended for public disclosure and not disclose it to any third party without prior written consent of the other party.7. Termination:This Contract may be terminated by either party with immediate effect upon written notice to the other party in case of any material breach by either party of its obligations under this Contract. Termination shall not affect any rights or obligations arising prior to termination or any provisions that are intended to survive termination of this Contract.8. Miscellaneous:Any disputes arising from or in connection with this Contract shall be settled through friendly negotiation between both parties. If no settlement can be reached, disputes shall be submitted to [约定纠纷解决机构或法院名称] forarbitration/settlement in accordance with its rules and procedures. This Contract is made in both English and [其他语言], with equal validity in both languages. This Contract is effectivefrom the date of signing by both parties and shall be binding on both parties.Buyer:Signature:Date:Seller:Signature:Date:篇5SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer: ________________________Seller: ________________________In consideration of the mutual promises and obligations of the parties hereto, the Buyer and the Seller agree to conclude this Contract under the terms and conditions stipulated below:Article 1: Product DescriptionThe Seller agrees to sell and the Buyer agrees to purchase the following commodity:(Here insert detailed description of the product, including name, model, quantity, specifications, etc.)Article 2: Price and Payment2.1 The total price for the goods shall be ________ (specify currency and amount).2.2 Payment shall be made by ________ (specify payment method, e.g., T/T, L/C, etc.) within ________ (specify timeframe, e.g., 30 days after the contract is signed).Article 3: Delivery3.1 The Seller shall deliver the goods to the port of ________ (specify port) no later than ________ (specify date).3.2 The Seller shall inform the Buyer in advance of the estimated date of shipment and provide necessary shipping documents.Article 4: Quality and Inspection4.1 The Seller shall ensure that the goods are of the quality as specified in Article 1.4.2 The Buyer shall have the right to inspect the goods during production and prior to shipment.Article 5: Force MajeureIn case of force majeure events, such as natural disasters or government regulations, both parties shall strive to resolve any issues and mitigate any losses.Article 6: Warranty and After-Sales ServiceThe Seller shall provide a warranty period of ________ (specify period) from the date of delivery for any defects in material or workmanship. After-sales service shall be provided as per the terms and conditions agreed by both parties.Article 7: ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure.Article 8: Dispute ResolutionAny disputes arising from or in connection with this Contract shall be settled through friendly consultation. If no settlementcan be reached, either party may submit the dispute to ________ (specify arbitration institution) for arbitration.Article 9: Miscellaneous9.1 This Contract is made in both English and ________ (specify other language if applicable), with equal legal effects. In case of any discrepancies between the two versions, the English version shall prevail.9.2 This Contract shall be binding on both parties and shall be effective as of the date of signing.9.3 Any amendments or modifications to this Contract shall be made in writing and agreed by both parties.Buyer's Signature: ________________________ Date:________________Seller's Signature: ________________________ Date:________________Note: This contract is a template only and should be customized to fit specific circumstances and requirements. It is advisable to have legal counsel review any contract before its execution.。

英文版买卖合同（通用3篇）英文版篇1contract no.：the buyers： the sellers：this contract is made by and between the buyers and the sellers; whereby the buyers agree to buy and the sellers agree to sell the under-mentioned goods subject to the terms and conditions as stipulated hereinafter：(1)name of commodity：(2) quantity：(3) unit price：(4)total value：(5) packing：(6) country of origin ：(7) terms of payment：(8) insurance：(9) time of shipment：(10) port of lading：(11) port of destination：(12)claims：within 45 days after the arrival of the goods at the destination， should the quality， specifications or quantity be found not in conformity with the stipulations of the contract except those claims for which the insurance company or the owners of the vessel are liable， the buyers shall， have the right on the strength of the inspection certificate issued by the c.c.i.c and the relative documents to claim for compensation to the sellers(13)force majeure ：the sellers shall not be held responsible for the delay in shipment or non-deli-very of the goods due to force majeure，which might occur during the process of manufacturing or in the course of loading or transit. the sellers shall advise the buyers immediately of the occurrence mentioned above the within fourteen days there after . the sellers shall send by airmail to the buyers for their acceptancea certificate of the accident. under such circumstances the sellers，however，are still under the obligation to take all necessary measures to hasten the deliveryof the goods.(14)arbitration ：all disputes in connection with the execution of this contract shall be settled friendly through negotiation. in case no settlement can be reached， the case then may be submitted for arbitration to the arbitration commission of the china council for the promotion of international trade in accordance with the provisional rules of procedure promulgated by the said arbitration commission . the arbitration committee shall be final and binding upon both parties. and the arbitration fee shall be borne by the losing parties.(the buyers) (the sellers)英文版买卖合同篇2Contract No.：The Buyers： The Sellers：This contract is made by and between the Buyers and the Sellers; whereby the Buyers agree to buy and the Sellers agree to sell the under-mentioned goods subject to the terms and conditions as stipulated hereinafter：(1)Name of Commodity：(2)Quantity：(3)Unit price：(4)Total Value：(5)Packing：(6)Country of Origin ：(7)Terms of Payment：(8)insurance：(9)Time of Shipment：(10)Port of Lading：(11)Port of Destination：(12)Claims：Within 45 days after the arrival of the goods at the destination， should the quality， Specifications or quantity be found not in conformity with the stipulations of the contract except those claims for which the insurance company or the owners of the vessel are liable， the Buyers shall， have the right on the strength of the inspection certificate issued by the C.C.I.C and the relative documents to claim for compensation to the Sellers(13)Force Majeure ：The sellers shall not be held responsible for the delay in shipment or non-deli-very of the goods due to Force Majeure，which might occur during the process of manufacturing or in the course of loading or transit. The sellers shall advise the Buyers immediately of the occurrence mentioned above the within fourteen days there after . the Sellers shall send by airmail to the Buyers for their acceptancea certificate of the accident. Under such circumstances the Sellers，however，are still under the obligation to take all necessary measures to hasten the deliveryof the goods.(14)Arbitration ：All disputes in connection with the execution of this Contract shall be settled friendly through negotiation. in case no settlement can be reached， the case then may be submitted for arbitration to the Arbitration Commission of the China Council for the Promotion of International Trade in accordance with the Provisional Rules of Procedure promulgated by the said Arbitration Commission . the Arbitration committee shall be final and binding upon both parties. and the Arbitration fee shall be borne by the losing parties.(The Buyers) (The Sellers)英文版买卖合同篇3CONTRACTContract No.：The Buyers： The Sellers：This contract is made by and between the Buyers and the Sellers; whereby the Buyers agree to buy and the Sellers agree to sell the under-mentioned goods subject to the terms and conditions as stipulated hereinafter：(1)Name of Commodity：(2) Quantity：(3) Unit price：(4)Total Value：(5) Packing：(6) Country of Origin ：(7) Terms of Payment：(8) insurance：(9) Time of Shipment：(10) Port of Lading：(11) Port of Destination：(12)Claims：Within 45 days after the arrival of the goods at the destination， should the quality， Specifications or quantity be found not in conformity with the stipulations of the contract except those claims for which the insurance company or the owners of the vessel are liable， the Buyers shall， have the right on the strength of the inspection certificate issued by the C.C.I.C and the relative documents to claim for compensation to the Sellers(13)Force Majeure ：The sellers shall not be held responsible for the delay in shipment or non-deli-very of the goods due to Force Majeure，which might occur during the process of manufacturing or in the course of loading or transit. The sellers shall advise the Buyers immediately of the occurrence mentioned above the within fourteen days there after . the Sellers shall send by airmail to the Buyers for their acceptancea certificate of the accident. Under such circumstances the Sellers，however，are still under the obligation to take all necessary measures to hasten the deliveryof the goods.(14)Arbitration ：All disputes in connection with the execution of this Contract shall be settled friendly through negotiation. in case no settlement can be reached， the case then may be submitted for arbitration to the Arbitration Commission of the China Council for the Promotion of International Trade in accordance with the Provisional Rules of Procedure promulgated by the said Arbitration Commission . the Arbitration committee shall be final and binding upon both parties. and the Arbitration fee shall be borne by the losing parties.(The Buyers) (The Sellers)。

买卖合同英文版6篇全文共6篇示例，供读者参考篇1Purchase and Sale AgreementThis Purchase and Sale Agreement ("Agreement") is made and entered into as of [Date], by and between [Seller], with a mailing address of [Address], and [Buyer], with a mailing address of [Address], collectively referred to as the "Parties."1. Purchase and Sale of the GoodsSeller agrees to sell, transfer, and deliver to Buyer, and Buyer agrees to purchase and accept from Seller, the goods as described in Exhibit A attached hereto (the "Goods") in accordance with the terms and conditions of this Agreement.2. PriceThe purchase price for the Goods shall be [Amount in words] dollars ($[Amount in numbers]), payable by Buyer to Seller in the manner set forth in Exhibit B attached hereto.3. DeliverySeller shall deliver the Goods to Buyer's designated location, on or before [Delivery Date]. If Seller fails to deliver the Goods by the Delivery Date, Buyer may cancel this Agreement.4. Inspection and AcceptanceBuyer shall have the right to inspect the Goods within [Number] days after delivery. If Buyer determines that the Goods do not conform to the specifications set forth in this Agreement, Buyer may reject the Goods by providing written notice to Seller within the Inspection Period.5. WarrantiesSeller warrants that the Goods will be free from defects in material and workmanship for a period of [Number] days from the date of delivery. In the event of a breach of this warranty, Buyer's sole remedy shall be the repair or replacement of the Goods.6. Governing LawThis Agreement shall be governed by and construed in accordance with the laws of the State of [State].7. Entire AgreementThis Agreement constitutes the entire agreement between the Parties with respect to the subject matter hereof and supersedes all prior agreements and understandings, whether written or oral, relating to such subject matter.IN WITNESS WHEREOF, the Parties hereto have executed this Agreement as of the date first above written.[Signature of Seller][Name of Seller][Title of Seller][Signature of Buyer][Name of Buyer][Title of Buyer]篇2Sales ContractThis Sales Contract (“Contract”) is made and entered into on this _______________ day of ____________, 20___ (the “Effective Date”) by and between:Seller: _______________ (the “Seller”)Address: _______________Phone: _______________Email: _______________Buyer: _______________ (the “Buyer”)Address: _______________Phone: _______________Email: _______________1. Sale of Goods: Seller agrees to sell and deliver to Buyer, and Buyer agrees to purchase and accept from Seller, the following goods (the “Goods”):Description: _____________________________________________Quantity: ______________________Price: _______________________ per unit, total purchase price: $ ______________2. Payment Terms: Buyer shall pay the total purchase price to Seller in the following manner:- Initial payment of $ _______________ upon signing this Contract- Balance payment of $ _______________ within ____________ days of delivery of the Goods.3. Delivery: Seller shall deliver the Goods to Buyer at_______________________________Delivery Date: _____________________________________Delivery Method: _________________________________Delivery Cost: _________________________________ (to be borne by Seller/Buyer in ___________%)4. Inspection and Acceptance: Buyer shall have the right to inspect the Goods upon delivery and shall notify Seller of any non-conformities within __________ days of delivery. If Buyer does not notify Seller within this timeframe, the Goods shall be deemed accepted.5. Title and Risk of Loss: Title to and risk of loss of the Goods shall pass from Seller to Buyer upon delivery. Seller shall bear the risk of loss during transportation to Buyer.6. Warranties: Seller warrants that the Goods are free from defects in material and workmanship and conform to the description provided. Seller further warrants that the Goods will comply with all applicable laws and regulations.7. Indemnification: Seller shall indemnify and hold harmless Buyer from any claims, damages, or losses arising from breaches of this Contract by Seller.8. Governing Law and Dispute Resolution: This Contract shall be governed by the laws of _______________. Any disputes arising under this Contract shall be resolved through arbitration in_________________ in accordance with the rules of the________________ Arbitration Association.The Parties hereby execute this Contract as of the Effective Date.Seller: _______________________Buyer: _______________________【注意】以上内容仅供参考，具体操作建议咨询专业人士。

英文购销合同范本6篇篇1PURCHASE AND SALE CONTRACTThis Purchase and Sale Contract (hereinafter referred to as the "Contract") is made by and between the Buyer and the Seller:Buyer: _________________ (Name of the Buyer)Seller: _________________ (Name of the Seller)I. Contracting PartiesThe contracting parties agree as follows:II. Products and SpecificationsThe products to be purchased and sold under this Contract are as follows: ______________ (Please specify the products, specifications, quantity, unit price, total value, etc.)III. Terms of DeliveryThe Seller shall deliver the products to the port/place specified below: ______________ (Delivery location). The mode of transportation, the date of shipment, and the port/place of receipt shall be agreed upon by both parties.IV. Terms of PaymentThe payment terms under this Contract shall be as follows: ______________ (Payment terms such as advance payment, terms of payment, documents required for payment, etc.).V. Quality Inspection and Warranty PeriodThe Seller shall ensure that the products are in conformity with the quality standards specified in this Contract. The warranty period shall be _______________ (Warranty period). During the warranty period, if any defects are found in the products, the Seller shall be responsible for repairing or replacing them at its own cost.VI. Risks and Penalties for Late Delivery or Non-DeliveryIf the Seller fails to make delivery of the products on time or delivers wrong specifications, it shall be responsible for any loss incurred to the Buyer. If the Seller cannot make delivery due to force majeure circumstances, it shall immediately notify the Buyer in writing and take proper measures to minimize the lossof both parties. The risks and penalties for late delivery ornon-delivery shall be agreed upon by both parties.VII. Confidentiality and Intellectual Property RightsVIII. Settlement of DisputesIX. General Clauses1) Force Majeure: Neither party shall be held responsible for failure or delay in performance of its obligations under this Contract due to force majeure causes such as natural disasters, government intervention or other unforeseeable circumstances beyond its control. If such circumstances occur, both parties shall endeavor to resume performance under this Contract as soon as possible after removal of such causes or upon receipt of advice from each other through diplomatic channels.篇2PURCHASE AND SALE CONTRACTThis Purchase and Sale Contract (hereinafter referred to as the "Contract") is made by and between the Buyer and the Seller:Buyer: ________________ (Name of Buyer)Seller: ________________ (Name of Seller)WHEREAS the Seller agrees to sell and the Buyer agrees to purchase the under mentioned commodity according to the terms and conditions stipulated below:I. Commodities: ________________ (The specific commodity or products to be purchased and sold, including name, specifications, quantity, etc.)II. Price: ________________ (The agreed price for the commodity, including total price, unit price, currency, payment terms, etc.)III. Quality and Quantity: ________________ (The quality standards, inspection methods, and any applicable tolerance levels for the commodity. The quantity to be delivered by the Seller and accepted by the Buyer.)IV. Delivery:a. Place of Delivery: ________________ (The place where the commodity shall be delivered.)b. Time of Delivery: ________________ (The date or period in which the delivery should be completed.)c. Risks and Expenses: ________________ (The risks and expenses related to delivery such as transportation, insurance, customs clearance, etc.)d. Delay in Delivery: Penalty for delay in delivery if any shall be as per the agreed terms.e. Any other specific conditions related to delivery.V. Payment:a. Terms of Payment: ________________ (The payment terms agreed upon by both parties, such as advance payment, payment on delivery, payment terms in letters of credit, etc.)b. Time of Payment: ________________ (The date or period in which the payment should be made.)c. Late Payment Penalty: Penalty for late payment if any shall be as per the agreed terms.d. Any other specific conditions related to payment.VI. Inspection and Acceptance: ________________ (The inspection procedures, acceptance criteria, and any other related conditions for the commodity.)VII. Claims: ________________ (The procedures and conditions for claims in case of damage or loss of the commodity during transportation or other relevant matters.)VIII. Force Majeure: Both parties shall be entitled to claim compensation for any losses incurred due to force majeure events such as natural disasters, wars, riots, etc., which are beyond their control. The responsibilities of both parties shall be suspended during such events.IX. Confidentiality: Both parties shall keep confidential all information related to this Contract that is not meant for public disclosure unless mutually agreed or required by law.X. Warranty and Guarantee: The Seller shall provide warranty and guarantee for the quality and performance of the commodity as per the agreed terms and conditions. Any defects or non-performance should be rectified by the Seller as per the warranty terms.XI. Termination: The Contract may be terminated by either party in case of breach of any term or condition by the other party. The party seeking termination shall provide notice to the other party and specify the reasons for termination. The provisions related to claims, confidentiality, warranty andguarantee shall remain valid even after termination of this Contract.In witness whereof, the parties have executed this Contract in ________________ (Place) on the ________________ (Date).Buyer: _____________________ (Signature of Buyer) Title:_____________________ (Title of Buyer) Date: _________________ (Date of Signature)篇3PURCHASE AND SALE CONTRACTThis Purchase and Sale Contract (hereinafter referred to as the "Contract") is made by and between the Seller and the Buyer, who agree to conclude this Contract upon the terms and conditions set out below:I. Contracting PartiesSeller: ___________________________ (Name of Seller)Address: _________________________ (Address of Seller)Buyer: ___________________________ (Name of Buyer)Address: _________________________ (Address of Buyer)II. Product DescriptionProduct Name: _________________________ (Product Name)Product Code: _________________________ (Product Code)Quantity: _________________________ (Quantity)Specification: _________________________ (Product specifications, including size, color, quality, etc.)Unit Price: _________________________ (Unit Price)Total Price: _________________________ (Total Price)III. Terms of PaymentThe Buyer shall make payment through ________________ (Payment method, e.g., wire transfer, letter of credit, etc.) in full before the delivery date specified in Clause IV.IV. Delivery TermsThe Seller shall ensure delivery of the products to the Buyer's designated location on or before ________________ (Delivery Date). Any delay in delivery shall be notified to the Buyer in advance.V. Quality AssuranceThe Seller guarantees that the products shall be new, of good quality, and comply with all applicable specifications andstandards. The Seller shall be responsible for any defects in material or workmanship.VI. Packaging and ShippingThe Seller shall properly pack and secure the products for shipment to ensure their safe arrival at the Buyer's designated location. The costs of packaging and shipping shall be borne by the Seller.VII. Risk and Title TransferRisk of loss or damage to the products shall be transferred to the Buyer upon delivery at the agreed location. Title to the products shall be transferred upon full payment by the Buyer.VIII. Confidentiality and Non-DisclosureBoth parties shall keep confidential all information related to this Contract, including product specifications, pricing, and business practices. Neither party shall disclose such information to third parties without the other party's consent.IX. Warranty and After-Sales ServiceThe Seller shall provide a warranty period of ________________ (Warranty Period) for the products. During this period, the Seller shall repair or replace any defective products at its own cost. TheSeller shall also provide necessary after-sales service support as agreed by both parties.X. Force MajeureNeither party shall be liable for any failure to perform its obligations under this Contract due to force majeure events, such as natural disasters, war, riots, etc. The affected party shall notify the other party promptly and provide reasonable evidence to prove the occurrence of such event.XI. Settlement of DisputesAny disputes arising out of or in connection with this Contract shall be settled through friendly consultation between the two parties. If no settlement can be reached, the dispute shall be submitted to ________________ (Dispute Resolution Mechanism, e.g., court, arbitration, etc.) for resolution.XII. Miscellaneous Provisions1. This Contract is made in ________________ (Language) and is binding upon both parties. Any amendments or modifications to this Contract must be made in writing and agreed upon by both parties.2. This Contract constitutes the entire agreement between the parties on the subject matter hereof and supersedes all prioragreements, understandings, and communications, whether oral or written.3. The invalidity or unenforceability of any provision of this Contract shall not affect the validity or enforceability of any other provision hereof.4. The laws of ________________ (Country/Jurisdiction) shall apply to this Contract. The courts of ________________ (Country/Jurisdiction) shall have jurisdiction over any disputes arising out of or in connection with this Contract.5. The Buyer may assign this Contract without the prior written consent of the Seller. The Seller may not assign this Contract without the prior written consent of the Buyer. However, either party may assign this Contract to a third party as part of a corporate reorganization or change of control transaction without obtaining prior consent from the other party if such assignment does not materially change the obligations of either party under this Contract.篇4PURCHASE AND SALE CONTRACTThis Purchase and Sale Contract (hereinafter referred to as the "Contract") is made by and between the Seller and the Buyer, who agree to conclude this Contract upon the terms and conditions set out below:Seller: _________________________ (Name of Seller)Buyer: _________________________ (Name of Buyer)I. Contract Article and Quantity:The Seller agrees to sell and the Buyer agrees to purchase the following goods: (Insert details of the goods, including name, quantity, specifications, etc.)II. Price and Payment:The total contract price shall be ________ (Insert contract price). The payment terms are as follows:a. Deposit: The Buyer shall pay a deposit of ________ (Insert deposit amount) upon signing this Contract.b. Balance Payment: The balance payment shall be made within ________ (Insert payment period) after the delivery of the goods.c. Payment Method: The payment shall be made through________ (Insert payment method, e.g., bank transfer, T/T, etc.)III. Delivery and Shipment:a. Delivery Time: The Seller shall deliver the goods within________ (Insert delivery time) from the date of signing this Contract.b. Shipping Method: The goods shall be shipped by ________ (Insert shipping method, e.g., air, sea, land, etc.) at the Buyer's option.c. Place of Delivery: The place of delivery shall be ________ (Insert place of delivery).d. Risk Transfer: Risk of loss or damage to the goods shall pass to the Buyer upon delivery at the place of destination specified in this Contract.IV. Quality and Inspection:a. Quality Standards: The goods shall be in accordance with the quality standards specified in this Contract.b. Inspection: The Buyer shall have the right to inspect the goods during production and prior to shipment. The Seller shall provide necessary assistance and facilitate such inspections.c. Quality Claim: If any claim is made by the Buyer regarding quality issues, such claim shall be made within ________ (Inserttime limit) after arrival of the goods at the port of destination. The Seller shall promptly address any quality issues raised by the Buyer in accordance with this Contract.V. Packaging and Marks:The Seller shall provide suitable packaging for the goods and ensure that all necessary marks and labels are affixed on each package, including name of goods, quantity, weight, measurements, gross weight, destination address, etc. All packaging must be suitable for long-distance transportation and must withstand normal conditions during transportation and handling without damage to or loss of the contents.VI. Claims and Penalties:a. If any claim is made by the Buyer due to late delivery or any other breach by the Seller, such claim shall be made in writing within ________ (Insert time limit) from the date of arrival of the goods at the port of destination. The Seller shall promptly address any claims raised by the Buyer in accordance with this Contract.b. If the Seller fails to perform its obligations under this Contract, it shall be liable for any losses incurred by the Buyer due to such failure. Penalties for late delivery or breach ofcontract may be imposed in accordance with relevant laws and regulations.c. Any claims or disputes arising from or in connection with this Contract shall be settled through friendly negotiations between both parties. If no settlement can be reached, such claims or disputes may be submitted to arbitration in accordance with relevant laws and regulations. Any disputes arising from this Contract shall be subject to arbitration in ________ (Insert place of arbitration). The arbitration decision shall be final and binding on both parties.VII. Force Majeure:In case of Force Majeure circumstances such as war, earthquake, flood, fire or other unforeseeable circumstances rendering performance of this Contract impossible or very difficult, both parties should strive to reach agreement on a solution through consultation before invoking Force Majeure as a reason for terminating or postponing performance under this Contract..VIII.. Miscellaneous:This Contract constitutes the entire agreement between both parties pertaining to the subject matter hereof andsupercedes all prior agreements whether written or oral between both parties pertaining to such subject matter. No amendment or modification of this Contract shall be valid unless made in writing signed by both parties..IX.. Entire Agreement/ Governing Law：This Contract constitutes the entire agreement between buyer and seller relating to its subject matter and no further oral promises are made.. This contract is governed by ________ law..X.. Entire Agreement/ Severability：篇5PURCHASE AND SALE CONTRACTThis Purchase and Sale Contract (hereinafter referred to as the "Contract") is made by and between the Buyer and the Seller:Buyer: _________________ (Name of the Buyer)Seller: _________________ (Name of the Seller)I. Contracting PartiesThe contracting parties agree to conclude this Contract subject to the terms and conditions stipulated below:II. Commodities and QuantityThe Seller agrees to sell and the Buyer agrees to purchase the following commodities: _________________ (Commodities) in the quantity specified in the attached Schedule A.III. Price and Terms of Payment1. The total amount of this Contract is ___________________ (USD or other currency), the unit price per metric ton is___________________ (USD or other currency per metric ton). Total quantity and total amount shall be specified in Schedule A.IV. Delivery Time and Place of Shipment篇6Buyer (甲方): _____________________Seller (乙方): _____________________In consideration of the mutual promises and agreements made and intended to be performed under the terms and conditions stated below, the Buyer and the Seller agree as follows:1. Description of Goods （商品描述）The Seller agrees to sell and the Buyer agrees to purchase the under mentioned commodity according to the terms and conditions stipulated below:（双方在此填写商品名称、规格、数量等详细信息）2. Price and Payment Terms （价格及付款条款）The total value of this contract is ____ USD. （在此填写合同总价）Payment terms: （描述付款方式和条件，例如预付款、尾款、支付方式等）3. Delivery Terms （交货条款）The Seller shall deliver the goods within ____ days after receiving the order confirmation and payment of ____% of the total contract value.（描述交货期限、地点、方式等）4. Quality and Inspection （质量及检验）The Seller shall ensure that the goods are new, sound, in good condition, free from damage and defects, and comply with all applicable specifications and standards. The Buyer shall have the right to inspect the goods before shipment.（描述商品质量标准、检验方式等）5. Risk and Ownership Transfer （风险及所有权转移）Risk of loss or damage to the goods shall pass to the Buyer upon delivery of the goods at the agreed place of delivery. Ownership of the goods shall transfer to the Buyer upon full payment of the contract price.（描述风险和所有权转移的细节）6. Warranty and Guarantee （保修及保证）The Seller shall provide warranty and guarantee for the goods in accordance with the contract and applicable laws.（描述保修期限、保修范围、保证事项等）7. Force Majeure （不可抗力）If either party is prevented from performing its obligations due to force majeure, it shall promptly notify the other party in writing and take reasonable measures to minimize the loss.（描述不可抗力事件的认定和处理方式）8. Settlement of Disputes （争议解决）Any disputes arising from or in connection with this contract shall be settled through friendly consultation. If no settlement can be reached, either party may submit the dispute to ____ for arbitration.（描述争议解决的方式和机构等）9. General Terms （通用条款）（在此添加任何其他适用的通用条款，例如保密义务、合同修改、适用法律等）10. Miscellaneous （其他事项）This contract is made out in ____ copies, ____ for the Seller and ____ for the Buyer.（描述合同份数等）The parties have read and understood all the terms and conditions stated above and have signed this Agreement in witness thereof.（双方已阅读并理解以上所有条款和条件，并已签署本协议为证。

外贸合同英文版7篇篇1This contract is hereby made by and between [买方名称], hereinafter referred to as the Buyer, and [卖方名称], hereinafter referred to as the Seller, concerning the import of [商品名称] from the Seller to the Buyer.1. Contract Article and Quantity本合同涉及的商品名称为[商品名称]，数量详见附件清单。

2. Price and Payment Terms商品价格及支付条款如下：- The total contract price shall be USD [金额] （总合同金额）。

- Payment terms: 30% T/T in advance as a down payment; 70% balance to be paid against the copy of the shipping documents.- All prices are FOB [港口名称], including necessary loading charges but excluding any other cost or charges beyond the port.3. Delivery and Quality Assurance交货及质量保证条款如下：- The Seller shall ensure proper packaging of the goods and shall mark the cases with the gross weight, net weight, manufacturer's name and necessary shipping marks.- The Seller shall guarantee that the goods are new and of the quality, specifications and quantity specified in the contract. Any discrepancies in quality must be reported to the Buyer immediately upon discovery.- The Seller shall arrange shipment within [交货期限] from the date of receiving the L/C or payment. The Seller shall inform the Buyer 4 weeks prior to the expected date of shipment of the estimated date of shipment and vessel name.4. Terms of Shipment and Delivery运输和交付条款如下：- The Seller shall arrange for shipment of the goods by sea under a confirmed, binding and valid shipping document. The Seller shall ensure that proper packing is made for ocean transportation and ensure that the goods are delivered to the vessel within the agreed time at the loading port nominated by the Seller. The risk of damage or loss in transit is borne by theSeller until delivery of the goods is made to the vessel at the port nominated by the Seller.- The Seller shall provide shipping documents required for customs clearance at destination port in a timely manner after shipment has been completed in full compliance with all contractual requirements pertaining to time, quantity, specifications and other matters covered by this Contract.Failure to comply with these requirements shall constitute a breach of Contract by the Seller.The Seller shall be responsible for any delay in delivery attributable to late delivery of documents by the Seller, provided however that timely notice of such delay has been given by Fax/E-mail/Letter and if requested by the Buyer, such delay is caused by reasonable factors beyond the Seller's control.The Seller shall be responsible for any damage or loss attributable to late delivery of documents as well as any delay in delivery caused by such late delivery of documents beyond the time limit agreed in this Contract or required by the applicable law.If late delivery results in loss to the Buyer, any claim should be settled mutually through friendly negotiations based on facts.In case such negotiations fail, claims could be filed in court with due evidence against compensation for direct losses only due to late delivery as confirmed by compensation regulations under international commercial law at the court’s decision, after consultation with relevant authorities about laws of China's Maritime Law as regards handling such claims.The claim should be filed within a reasonable period from date of discovery of loss or damage attributable to late delivery but not later than three months from date of arrival of goods at destination port stipulated in this Contract.篇2甲方（买方）：___________地址：___________电话：___________电子邮箱：___________法定代表人（或授权代表）：___________乙方（卖方）：___________地址：___________电话：___________电子邮箱：___________法定代表人（或授权代表）：___________鉴于甲、乙双方同意按照以下条款进行国际贸易交易，特订立本合同协议：一、商品名称、规格及数量甲方同意购买，乙方同意出售以下商品：（请在此处详细列出商品的名称、规格、型号、数量等详细信息）二、价格及支付方式1. 甲方应按照以下条款支付商品价款：___________ （请在此处明确价格条款，包括货币种类、单价、总价等）2. 支付方式：___________ （请在此处明确支付方式，如电汇、信用证等）3. 付款期限：___________ （请在此处明确付款期限）三、交货与装运1. 交货期限：乙方应在合同生效后_______天内交货。

买卖合同（英文版）6篇篇1SALES CONTRACTThis Sales Contract is made on [Date], between the following two parties:Seller:[Seller Name]Buyer:[Buyer Name]Article of Sale:The Seller agrees to sell and the Buyer agrees to purchase the following commodity:[Description of the goods being sold, including quantity, quality, specifications, etc.]Terms of Payment:The total amount payable by the Buyer to the Seller for the aforesaid commodity is [Total Amount]. The payment shall be made as follows:1. A deposit of [Deposit Amount] paid within [Deposit Payment Period] upon signing of this contract.2. The balance of [Balance Amount] shall be paid against the presentation of the shipping documents by T/T (telegraphic transfer) within the time of [Payment Deadline].Delivery and Shipment:The Seller shall deliver the goods on [Delivery Date] at the port of [Port of Delivery]. The Buyer shall take delivery of the goods as arranged and effect shipment within the time as stipulated.Quality and Quantity Inspection:Force Majeure:Liability and Warranty:Miscellaneous:In witness whereof, the parties have signed and sealed this Contract in [Place] on [Date].Seller:[Seller Name]Signature: ___________________________Stamp: ___________________________Date: ___________________________Buyer:[Buyer Name]Signature: ___________________________Stamp: ___________________________Date: ___________________________(Note: This contract is drafted in accordance with general principles of commercial practice and contract law. It is recommended that you consult with legal counsel for specific advice on terms and conditions that may be applicable to your specific situation.)篇2SALES CONTRACTThis Sales Contract is made on [Date], between the following two parties:Buyer:Name: _____________________________Address: _____________________________Country: _____________________________Seller:Name: _____________________________Address: _____________________________Country: _____________________________Article 1: Product DescriptionThe Seller shall sell and the Buyer shall purchase the following products: [Detailed list of products, including product name, specifications, quantity, unit price, total value, etc.]Article 2: Contract Price & Terms of Payment2.1 The total contract price shall be in the amount of ________ (currency and total amount).2.2 Terms of payment: [Describe the terms of payment, e.g., cash on delivery, advance payment, terms of credit, etc.]Article 3: Delivery3.1 The Seller shall deliver the products to the Buyer at the following address: [Delivery address].3.2 Delivery date: [Specified delivery date or period].3.3 Delay in delivery: If the Seller fails to make timely delivery due to causes beyond its control, the Seller shall notify the Buyer immediately and ensure prompt delivery at a later agreed time.Article 4: Quality & Inspection4.1 The Seller shall ensure that the products are of good quality and meet the specifications agreed upon by both parties.4.2 Inspection: [Describe inspection procedures, location, and other related details.]Article 5: Risks & Liabilities5.1 Risks associated with the products shall pass to the Buyer upon delivery.5.2 If any defects are found in the products, the Seller shall be responsible for rectifying or replacing them at its own cost.Article 6: Warranty & Guarantee6.1 The Seller provides a warranty for the products, guaranteeing their quality and performance for a period of [Warranty period].6.2 In case of any defects during the warranty period, the Seller shall rectify or replace the products free of charge.Article 7: Force Majeure7.1 If either party is prevented from fulfilling its contractual obligations due to force majeure events, it shall notify the other party immediately and provide evidence of such occurrence.Article 8: Confidentiality8.1 Both parties shall keep confidential all information related to this contract that is not intended for public disclosure.Article 9: Termination9.1 This contract may be terminated by either party in case of fundamental breach by the other party.Article 10: Disputes10.1 Any disputes arising from or in connection with this contract shall be settled through friendly negotiations. If no settlement can be reached, either party may submit the dispute to [Dispute resolution mechanism].Article 11: Miscellaneous11.1 This contract is made in [Language] and [Number] copies, with both parties holding an equal number of copies.11.2 This contract is effective from the date of signing by both parties and shall remain valid until fully performed by both parties.In witness whereof, the parties have signed this contract on the date mentioned above.Buyer Signature: _____________________________ Date:_____________Seller Signature: _____________________________ Date:_____________Legal Witness Signature: _____________________________ Date: _____________Legal Witness Signature (if applicable):_____________________________ Date: _____________合同结束处请您确保有适当的签字部分和日期栏供双方签字确认。

英文版买卖合同6篇篇1Sales ContractThis Sales Contract (the "Contract") is made and entered into as of [Date], by and between [Seller], located at [Seller's address], and [Buyer], located at [Buyer's address].1. Description of Goods1.1 The Seller agrees to sell to the Buyer, and the Buyer agrees to purchase from the Seller, the following goods:- Description of goods2. Price2.1 The purchase price of the goods shall be [Amount in words] [Amount in numbers], which shall be paid by the Buyer to the Seller in the following manner: [Payment terms].3. Delivery3.1 The Seller shall deliver the goods to the Buyer on or before [Delivery date] at the Buyer's designated location.3.2 The Buyer shall be responsible for any additional costs or charges associated with the delivery of the goods.4. Inspection and Acceptance4.1 The Buyer shall have a period of [Number of days] days from the date of delivery to inspect the goods and notify the Seller of any defects or non-conformities.4.2 If the Buyer fails to notify the Seller of any defects or non-conformities within the specified period, the goods shall be deemed accepted.5. Warranties5.1 The Seller warrants that the goods shall conform to the description provided in this Contract and shall be free from defects in materials and workmanship.5.2 The Seller's liability under this warranty shall be limited to the purchase price of the goods.6. Governing Law6.1 This Contract shall be governed by and construed in accordance with the laws of [State/Country].IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the date first written above.[Seller]By: ________________________ Date: __________[Buyer]By: ________________________ Date: __________This Sales Contract represents the entire agreement between the Seller and Buyer with respect to the sale of the goods described herein. Redistributions or modifications of this Contract must be in writing and signed by both parties.篇2Sales ContractThis Sales Contract (the "Contract") is entered into on [date] by and between [Seller Name], with its principal place of business at [Seller Address] (the "Seller"), and [Buyer Name], with its principal place of business at [Buyer Address] (the "Buyer").Recitals:Whereas, the Seller sells the following products: [list of products]; andWhereas, the Buyer wishes to purchase the said products from the Seller.Now, therefore, in consideration of the mutual covenants and agreements set forth herein, the parties agree as follows:1. Sale of Products: The Seller agrees to sell and the Buyer agrees to purchase the products listed in Exhibit A attached hereto (the "Products").2. Purchase Price: The Buyer shall pay the Seller the purchase price of the Products as specified in Exhibit A. Payment shall be made in [currency] to the Seller's bank account within [number] days of the date of this Contract.3. Delivery: The Seller shall deliver the Products to the Buyer at the address specified by the Buyer on or before [delivery date]. The Buyer shall bear all costs related to transportation, insurance, and customs duties.4. Inspection: The Buyer shall inspect the Products upon delivery and notify the Seller of any defects or discrepancies within [number] days of receipt. Failure to do so shall constitute acceptance of the Products.5. Warranty: The Seller warrants that the Products shall be free from defects in material and workmanship for a period of [number] days from the date of delivery. If any defects are found,the Seller shall replace the defective Products at no additional cost to the Buyer.6. Termination: Either party may terminate this Contract by providing written notice to the other party if the other party breaches any of its obligations under this Contract.7. Governing Law: This Contract shall be governed by and construed in accordance with the laws of [state/country].8. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the sale of the Products and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties have executed this Contract as of the date first above written.Seller Name: _________________________Buyer Name: _________________________Exhibit A: List of Products[Insert list of products]This Sales Contract is hereby accepted by the parties:Seller: ____________________________Buyer: _____________________________Date: _____________________________篇3Sales ContractThis sales contract is entered into by and between [Seller], hereinafter referred to as the "Seller", and [Buyer], hereinafter referred to as the "Buyer", collectively referred to as the "Parties".1. Object of the ContractThe Seller agrees to sell and the Buyer agrees to purchase the following goods: [Description of Goods], in accordance with the terms and conditions set forth in this sales contract.2. Purchase PriceThe purchase price for the goods shall be [Amount in Currency], payable in [Payment Terms], with the first payment due upon signing of this contract. The Buyer shall make all payments to the Seller in the currency specified in this contract.3. DeliveryThe Seller shall deliver the goods to the Buyer at the following address: [Delivery Address], no later than [DeliveryDate]. The Buyer shall be responsible for all costs associated with the delivery of the goods, including but not limited to transportation, insurance, and customs fees.4. Inspection and AcceptanceUpon delivery of the goods, the Buyer shall have the right to inspect the goods within [Number of Days] days. If the goods do not conform to the specifications set forth in this contract, the Buyer may reject the goods and request a replacement or refund.5. WarrantyThe Seller warrants that the goods are free from defects in materials and workmanship at the time of delivery. If the goods are found to be defective, the Seller shall replace the goods at no additional cost to the Buyer within [Warranty Period].6. Governing LawThis sales contract shall be governed by and construed in accordance with the laws of [Country], without regard to its conflict of law principles.7. Dispute ResolutionAny dispute arising out of or in connection with this sales contract shall be resolved through negotiation between theParties. If the Parties are unable to reach a resolution, the dispute shall be submitted to arbitration in accordance with the rules of [Arbitration Organization].In witness whereof, the Parties hereto have executed this sales contract as of the date first above written.[Seller] [Buyer]Signature: ___________________ Signature: ___________________Name: ___________________ Name: ___________________Date: ___________________ Date: ___________________篇4Sales and Purchase ContractThis Sales and Purchase Contract (the "Contract") is entered into on this ____ day of _______, 20__, by and between __________ company, a company organized and existing under the laws of ________, with its principal place of business at ________ (the "Seller"), and __________ company, a company organized and existing under the laws of ________, with its principal place of business at ________ (the "Buyer").WITNESSETH:WHEREAS, the Seller wishes to sell the products described as ________ (the "Products") to the Buyer; andWHEREAS, the Buyer wishes to purchase the Products from the Seller.NOW, THEREFORE, in consideration of the mutual covenants and agreements contained herein, the parties agree as follows:1. Sale and Purchase. The Seller agrees to sell and the Buyer agrees to purchase the Products in accordance with the terms and conditions of this Contract.2. Quantity. The total quantity of the Products to be purchased under this Contract shall be ________ units.3. Price. The price for the Products shall be ________ per unit. The total purchase price shall be ________.4. Delivery. The Seller shall deliver the Products to the Buyer at ________ on or before ________.5. Payment. The Buyer shall pay the total purchase price to the Seller within ________ after delivery of the Products.6. Warranty. The Seller warrants that the Products shall be free from defects in materials and workmanship for a period of ________ from the date of delivery.7. Governing Law. This Contract shall be governed by and construed in accordance with the laws of ________.8. Entire Agreement. This Contract contains the entire agreement between the parties with respect to the purchase and sale of the Products and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties hereto have caused this Contract to be executed as of the date first above written.SELLER: ______________BUYER: ______________This Sales and Purchase Contract is entered into by and between the Seller and the Buyer. The Seller agrees to sell the Products to the Buyer at a specified price, with delivery and payment terms outlined in the Contract. This Contract serves as the legal agreement between the parties and contains warranties, governing law provisions, and other important terms and conditions for the purchase and sale of the Products.篇5Purchase AgreementThis Purchase Agreement ("Agreement") is made effective as of [Date] by and between [Seller Name], with a mailing address of [Address] (hereinafter referred to as "Seller"), and [Buyer Name], with a mailing address of [Address] (hereinafter referred to as "Buyer").1. Purchase and Sale of GoodsSeller agrees to sell, transfer, and deliver to Buyer, and Buyer agrees to purchase from Seller, the goods specified in Exhibit A attached hereto (the "Goods").2. Purchase PriceThe purchase price for the Goods shall be [Amount] USD. Buyer shall pay the purchase price to Seller in full upon delivery of the Goods.3. DeliverySeller shall deliver the Goods to Buyer at [Delivery Address] no later than [Delivery Date]. Buyer shall be responsible for all shipping and handling costs associated with the delivery of the Goods.4. Inspection and AcceptanceBuyer shall have [Number] days from the date of delivery to inspect the Goods and notify Seller of any defects ornon-conformities. If Buyer fails to notify Seller within the specified period, the Goods shall be deemed accepted.5. WarrantiesSeller warrants that the Goods shall conform to the specifications set forth in Exhibit A and shall be free from defects in material and workmanship. Seller further warrants that it has good and marketable title to the Goods and that it has the right to transfer such title to Buyer.6. Limitation of LiabilityThe liability of Seller under this Agreement shall be limited to the purchase price paid by Buyer for the Goods. In no event shall Seller be liable for any consequential, incidental, or punitive damages.7. Governing LawThis Agreement shall be governed by and construed in accordance with the laws of the [State/Country]. Any dispute arising under or relating to this Agreement shall be subject to the exclusive jurisdiction of the courts of [State/Country].8. Entire AgreementThis Agreement constitutes the entire agreement between the parties with respect to the purchase and sale of the Goods and supersedes all prior agreements, understandings, and negotiations, whether written or oral.IN WITNESS WHEREOF, the parties have executed this Agreement as of the date first above written.Seller: _______________________ Date: _______________Buyer: _______________________ Date: _______________Exhibit A[Description of Goods]篇6Purchase and Sale AgreementThis Purchase and Sale Agreement (the "Agreement") is made and entered into on this [date], by and between [Seller], with a mailing address of [address] (the "Seller"), and [Buyer], with a mailing address of [address] (the "Buyer").1. Purchase and Sale of GoodsSeller agrees to sell, transfer, and deliver to Buyer, and Buyer agrees to purchase and accept from Seller, the following goods(the "Goods"): [description of the goods], in the quantity of [quantity] at the unit price of [price].2. Purchase PriceThe total purchase price for the Goods shall be [total price], of which Buyer shall pay Seller [deposit amount] as an initial deposit upon signing this Agreement. The remaining balance shall be paid in full upon receipt of the Goods by Buyer.3. DeliverySeller shall deliver the Goods to Buyer at the following location: [delivery address]. Delivery shall be made on or before [delivery date]. Buyer shall be responsible for all shipping and handling costs associated with the delivery of the Goods.4. Inspection and AcceptanceBuyer shall have [number] days from the date of delivery to inspect the Goods and notify Seller of any defects ornon-conformities. If Buyer fails to notify Seller within this time frame, the Goods shall be deemed accepted by Buyer.5. Title and Risk of LossTitle to and risk of loss of the Goods shall pass from Seller to Buyer upon delivery of the Goods to Buyer at the delivery location.6. WarrantiesSeller warrants that the Goods are free from defects in materials and workmanship and conform to the specifications set forth in this Agreement. Seller further warrants that it has good and marketable title to the Goods, free and clear of any liens or encumbrances.7. Limitation of LiabilitySeller's liability under this Agreement shall be limited to the purchase price of the Goods. In no event shall Seller be liable for any consequential, incidental, or punitive damages arising from the sale of the Goods.8. Governing LawThis Agreement shall be governed by and construed in accordance with the laws of the State of [state].9. Entire AgreementThis Agreement contains the entire understanding and agreement between the parties with respect to the purchase andsale of the Goods and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties have executed this Agreement as of the date first written above.Seller: [Seller's Name]Buyer: [Buyer's Name]。

外贸合同范本中英文6篇篇1合同编号：【合同编号】甲方（买方）：【买方名称】乙方（卖方）：【卖方名称】鉴于甲、乙双方同意按照本合同的条款进行货物交易，现特此签订本合同。

一、货物描述及规格（中文）货物名称：【货物名称】（中文）型号/规格：【型号/规格】（英文）Goods Description：【Goods Name】（英文）Model/Specification：【Model/Specs】二、数量及单位（中文）数量：【数量】（中文）计量单位：【计量单位】（英文）Quantity：【Quantity】（英文）Unit of Measurement：【Unit】三、价格与支付方式（中文）货物单价：【货物单价】（中文）总金额：【总金额】（英文）Unit Price：【Unit Price】（英文）Total Amount：【Total Amount】支付方式：【支付方式描述，例如：通过不可撤销的信用证，货到付款等】四、交货与包装（中文）交货期限：【交货日期】（中文）交货地点：【交货地点】（英文）Delivery Time：【Delivery Date】（英文）Delivery Place：【Delivery Place】包装要求：【包装描述，例如：按照惯例进行适当包装，保证货物安全等】五、品质保证与检验乙方应保证货物符合合同规定的品质与数量。

甲方有权在货到后进行检验，如发现品质或数量与合同不符，甲方有权要求乙方更换或退货。

六、保密条款双方应对本合同内容及在执行过程中获知的对方商业秘密和技术秘密予以保密，未经对方许可，不得向任何第三方泄露。

七、违约责任如一方违反本合同的任何条款，违约方应承担由此造成的一切损失。

八、不可抗力如因不可抗力因素致使一方不能履行本合同，应及时通知对方，双方可通过友好协商，确定是否修改或解除合同。

九、法律适用与争议解决篇2合同编号：【编号】甲方（买方）：【买方名称和地址】乙方（卖方）：【卖方名称和地址】根据《中华人民共和国合同法》及相关法律法规的规定，甲乙双方在平等、自愿、公平和诚实信用的基础上，就买方向卖方购买商品事宜，经友好协商，达成如下协议：一、商品名称、规格、数量及价格（中英文对照）Commodity Name, Specifications, Quantity and Price （中英文对照）商品名称商品规格数量价格备注（请根据实际情况填写）二、交货期限与方式（中英文对照）Delivery Time and Mode （中英文对照）乙方应按照甲方要求的交货期限将商品交付给甲方。

英文版买卖合同8篇篇1SALES CONTRACTSeller: _________________________ (Seller's Name)Buyer: _________________________ (Buyer's Name)This Sales Contract is made on _________ (Date) between the Seller and the Buyer:1. The ProductThe Seller agrees to sell and the Buyer agrees to purchase the following product:* Product Name: _________________________* Product Description: _________________________* Quantity: _________________________ (Quantity of Products)* Price: _________________________ (Price per Unit)* Total Contract Value: _________________________ (Total Contract Value in agreed currency)2. Terms of Delivery* Delivery shall be made within _________ (Timeframe) from the date of this Contract.* The Seller shall inform the Buyer of the estimated date of dispatch.* The risk of loss or damage to the product shall pass to the Buyer upon delivery.3. Terms of Payment* The Buyer shall make full payment in advance through_________ (Payment Method).* In case of any delay in payment, the Buyer shall inform the Seller promptly and agree on a revised schedule of payments.* Penalty for late payment shall be calculated at _________ (Rate) per day for the overdue amount.4. Quality and Inspection* The Seller guarantees the quality of the product as specified in the contract.* The product shall be inspected by a mutually agreedthird-party inspector before dispatch from the Seller's premises.* If any defect is found during inspection, the Seller shall replace or repair the product at its cost.5. Force MajeureNeither party shall be liable for any failure to perform due to causes beyond their reasonable control, such as natural disasters, war, riots, or government action. However, the affected party shall notify the other party promptly and use reasonable efforts to mitigate the impact.6. ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not intended for public disclosure. Neither party shall disclose any confidential information to third parties without the other party's prior written consent.7. TerminationThis Contract may be terminated by mutual consent or by either party for cause, including breach of contract or failure to perform as per the agreed terms. In case of termination, all rights and obligations under this Contract shall be resolved in accordance with applicable laws.8. General Terms* This Contract is made in English and is binding upon both parties. Any amendments or modifications must be agreed upon by both parties in writing.* Any disputes arising out of or in connection with this Contract shall be settled through friendly negotiations between both parties. If no settlement can be reached, such disputes shall be finally settled under the laws of _________(Country/Jurisdiction).* This Contract is subject to the laws of _________ (Country/Jurisdiction).篇2买卖合同（Sale and Purchase Contract）本合同由以下双方签订：买方（Buyer）：____________卖方（Seller）：____________鉴于买方希望购买，卖方愿意出售以下商品，双方本着平等、自愿、公平的原则，经友好协商，达成如下协议：一、商品描述（Commodity Description）1. 商品名称（Name of Commodity）：____________2. 型号/规格（Model/Specification）：____________3. 数量（Quantity）：____________4. 质量（Quality）：符合附件中的质量标准。

中英文合同范本适用(共5篇)（经典版）编制人：__________________审核人：__________________审批人：__________________编制单位：__________________编制时间：____年____月____日序言下载提示：该文档是本店铺精心编制而成的，希望大家下载后，能够帮助大家解决实际问题。

文档下载后可定制修改，请根据实际需要进行调整和使用，谢谢!并且，本店铺为大家提供各种类型的经典范文，如工作总结、工作计划、合同协议、条据书信、讲话致辞、规章制度、策划方案、句子大全、教学资料、其他范文等等，想了解不同范文格式和写法，敬请关注!Download tips: This document is carefully compiled by this editor. I hope that after you download it, it can help you solve practical problems. The document can be customized and modified after downloading, please adjust and use it according to actual needs, thank you!Moreover, our store provides various types of classic sample texts for everyone, such as work summaries, work plans, contract agreements, document letters, speeches, rules and regulations, planning plans, sentence summaries, teaching materials, other sample texts, etc. If you want to learn about different sample formats and writing methods, please pay attention!中英文合同范本适用(共5篇)中英文合同范本适用第一篇外贸合同contract编号：no：日期：date：签约地点：signed at：卖方：sellers：住址：address：邮政编码：postal code：电话：tel：传真：faX：买方：buyers：住址：address：邮政编码：postal code：电话：tel：传真：faX：买卖双方同意按下列条款由卖方出售，买方购进下列货物：the sellers agrees to sell a nd the buyer agrees to buy the undermentioned goods on the terms a nd conditions stated below.1 货号 article no.2 汽及规格 description&specification3 数量 quantity4 单价 unit price5 总值：数量及总值均有____%的增减，由卖方决定。

英文买卖合同7篇篇1Contract for the Sale of GoodsThis contract is made between ABC Limited, whose registered office is at 123 Main Street, New York, USA, and XYZ Corporation, whose registered office is at 456 Eight Avenue, London, England, on this day of August 2024.1. DefinitionsIn this contract, the following terms shall have the following meanings:* "Buyer" means XYZ Corporation;* "Seller" means ABC Limited;* "Goods" means the products to be sold by the Seller to the Buyer, as specified in this contract;* "Contract" means this agreement between the Buyer and the Seller for the sale of the Goods;* "Delivery" means the transfer of the Goods from the Seller to the Buyer or to a carrier appointed by the Buyer.2. Sale of GoodsThe Seller agrees to sell and the Buyer agrees to purchase the following Goods:* Product: High-Tech Electronic Devices* Quantity: 1000 units* Price: $100 per unit* Total Price: $100,000The Goods shall be delivered to the Buyer's designated location within 30 days from the date of signing this contract.3. Payment TermsThe Buyer shall pay the following amounts to the Seller in accordance with the terms set out below:* 30% deposit within 7 days of signing this contract;* 70% balance due upon completion of delivery and acceptance of the Goods.The payment shall be made by wire transfer to the Seller's bank account specified in this contract.4. Shipment and InsuranceThe Seller shall arrange for the shipment of the Goods to the Buyer's designated location. The Buyer shall be responsible for obtaining insurance coverage for the Goods during transit. The Seller shall provide all necessary documents for customs clearance.5. Warranty and After-Sales ServiceThe Seller warrants that the Goods are free from defects in material and workmanship and shall provide a one-year warranty from the date of delivery. During the warranty period, the Seller shall repair or replace any defective Goods free of charge. The Buyer shall notify the Seller of any warranty claims within 30 days of discovery.6. Force MajeureNeither party shall be liable for any delay or failure to perform its obligations under this contract due to events beyond its reasonable control, including but not limited to strikes, lockouts, riots, insurrections, wars, fires, explosions, earthquakes, floods, and other natural disasters. In such cases, the affected party shall notify the other party as soon as possible and shall use reasonable efforts to mitigate the effects of the event.7. Applicable Law and JurisdictionThis contract shall be governed by and construed in accordance with the laws of England. Any disputes arising out of or in connection with this contract shall be submitted to the exclusive jurisdiction of the courts of England.8. Miscellaneous* The failure of either party to exercise any right or remedy under this contract shall not constitute a waiver of such right or remedy.* This contract shall be binding upon and ensure to the benefit of the parties hereto and their respective successors and assigns.* This contract may be executed in any number of counterparts, each of which shall be deemed an original, and all of which together shall constitute one and the same instrument.Signed by: ABC Limited XYZ CorporationDate: August 2024篇2This Purchase Agreement is made between [Buyer's Name], of [Buyer's Address], and [Seller's Name], of [Seller's Address], on [Date of Purchase].1. Product Description and Quantity: The buyer agrees to purchase from the seller the following product(s): [Product Description and Quantity].2. Price and Payment Terms: The total price for the products described in Paragraph 1 is [Total Price]. The buyer shall make payment to the seller in full within [Payment Terms].3. Delivery Terms: The seller shall deliver the products to the buyer at [Delivery Location] on or before [Delivery Date].4. Warranty and After-sales Service: The seller warrants that the products are free from defects in materials and workmanship and shall provide necessary after-sales service as agreed upon.5. Inspection and Acceptance: The buyer shall inspect the products upon receipt and shall provide written acceptance to the seller within [Acceptance Period].6. Force Majeure: In the event of any force majeure event, including but not limited to war, riot, fire, earthquake, or othernatural disaster, either party may be excused from performance of this agreement to the extent that performance is made impossible or commercially impractical by such event.7. Governing Law and Jurisdiction: This agreement shall be governed by and interpreted in accordance with the laws of [Jurisdiction]. Any dispute arising out of or in connection with this agreement shall be submitted to the exclusive jurisdiction of the courts of [Jurisdiction].8. Miscellaneous:- Any amendment or modification to this agreement shall be in writing and signed by both parties.- This agreement constitutes the entire agreement between the parties and supersedes all prior agreements, representations, and understandings.- The parties hereto are independent contractors and no agency, partnership, joint venture, or employee-employer relationship is intended or created by this agreement.By: [Buyer's Name]Date: [Date of Purchase]By: [Seller's Name]Date: [Date of Purchase]英文买卖合同注意事项：在签订英文买卖合同时，需要注意以下事项：1. 合同主体的资格审查：在签订合同前，应审查合同主体的资格，包括其身份证明、营业执照、税务登记证等，以确保其具有签订和履行合同的合法资格。

英文版买卖合同3篇篇1Sample English Sales Contract AgreementContract Date: ____(Insert Date)Buyer (Name of Buyer): ____(Insert Name)Seller (Name of Seller): ____(Insert Name)Sales Contract AgreementThis Sales Contract (hereinafter referred to as the "Contract") is made and entered into by the Buyer and the Seller on the date indicated above, concerning the sale of goods. The parties hereby agree as follows:Article 1: Identification of the PartiesThe Buyer and Seller identified above shall be referred to as such throughout this Contract.Article 2: Description of GoodsThe Seller agrees to sell and the Buyer agrees to purchase the goods specified in Article 3 of this Contract. The detailed specifications and quantity of the goods are listed in the Appendix.Article 3: Price and PaymentThe total price for the goods shall be as stated in the Appendix. The payment terms are as follows: ____(Insert Payment terms, e.g., 30% advance payment, balance upon delivery). All payments shall be made in ____(Insert currency).Article 4: Delivery and ShipmentThe Seller shall deliver the goods to the Buyer at the place and on the date specified in the Appendix. The risk of loss or damage to the goods shall pass to the Buyer upon delivery.Article 5: Quality and InspectionThe Seller shall ensure that the goods are of the agreed quality. The Buyer shall have the right to inspect the goods prior to delivery. If any defects are found, the Seller shall promptly replace or repair the goods.Article 6: Force MajeureNeither party shall be liable for any failure to perform due to causes beyond their reasonable control, such as acts of war, riots, strikes, accidents, natural disasters, or government regulations.Article 7: Warranty and GuaranteeThe Seller guarantees that the goods shall be free from defects in material and workmanship for a period of ____(Insert duration) from the date of delivery. Any defects shall be promptly replaced or repaired by the Seller at its cost.Article 8: TerminationThis Contract may be terminated by either party in the event of a breach by the other party. In such case, the non-breaching party shall be entitled to claim damages.Article 9: DisputesAny disputes arising out of or in connection with this Contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit the dispute to ____(Insert arbitration institution) for arbitration.Article 10: General ProvisionsBuyer Signature: ________________________ Date: ____(Insert Date)Seller Signature: ________________________ Date: ____(Insert Date)（以下为此合同附录）Appendix: Detailed Product Specifications, Quantity, Price List, Delivery Date, and Place of Delivery... （具体的商品规格、数量、价格清单、交货日期和交货地点等细节）篇2SALES CONTRACTParty A: [Name of Party A]Party B: [Name of Party B]In accordance with the principles of equality and mutual benefit, through friendly consultations, Party A and Party B agreed to conclude the following contract for the sale of [Name of Goods/Products].Article 1: Contract ObjectThe object of this Contract is the sale and purchase of [specification, quantity, quality, etc.] of the products specified in Article 2.Article 2: Product DescriptionThe products to be sold under this Contract are as follows: [describe the product, including its name, specifications, quantity, quality standards, etc.].Article 3: Price and Payment3.1 The price of the products shall be [specify price].3.2 Payment shall be made as follows: [describe the payment terms, including payment method, time, and conditions].Article 4: Delivery and Inspection4.1 Delivery shall be made on [specify delivery date/period].4.2 Party B shall inspect the products upon receipt. Any discrepancies must be reported to Party A within [specify time limit].Article 5: Quality AssuranceParty A guarantees that the products are in conformity with the quality standards specified in Article 2.Article 6: ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not meant for public disclosure.Article 7: Force MajeureIf performance of this Contract is prevented, restricted or delayed due to any cause beyond the control of either party, such party shall notify the other in writing within a reasonable period of time.Article 8: Warranty and After-sales ServiceParty A shall provide warranty and after-sales service as specified in the attached Warranty and After-Sales Service Agreement.Article 9: Ownership and Risk TransferOwnership and risk of the products shall be transferred to Party B upon delivery.Article 10: TerminationThis Contract may be terminated by either party in the event of a breach by the other party. Termination shall be notified to the other party in writing.Article 11: Dispute ResolutionAny disputes arising from or in connection with this Contract shall be settled through friendly consultations. If no settlement can be reached, such disputes shall be submitted to [specify relevant arbitration institution/court] for arbitration/resolution.Article 12:Miscellaneous12.1 This Contract constitutes the entire agreement between the parties for the sale of the products covered by this Contract and replaces any prior oral or written communications between them.12.2 This Contract shall be binding on both parties and their legal representatives and shall be binding for all times after signing by both parties.12.3 Any amendments or modifications to this Contract must be made in writing and signed by both parties.12.4 This Contract is made out in [specify language] and is equally effective in both languages.In witness whereof, Party A and Party B have signed this Contract at [specify place], on [specify date].Party A (Seal): ________________________________________ Date: _________________________ Signature: _________________________Party B (Seal): ________________________________________ Date: _________________________ Signature: _________________________(This is a sample contract only and should not be used without proper legal advice.) Please note that you should consult a legal expert before entering into any contract to ensure its validity and enforceability in your jurisdiction.篇3SALES CONTRACTParty A: [Name of Party A]Party B: [Name of Party B]In accordance with the principles of mutual respect and mutual benefit, both parties agree to conclude this sales contract through friendly consultation.Article 1: Contract ObjectParty A agrees to sell the following products to Party B: [describe the product in detail, including name, specifications, quantity, and other relevant details].Article 2: Price and Payment1. The total price of the products is [specify the total price in figures and words].2. Payment terms: [specify the payment terms, such as advance payment, T/T, L/C, etc.]Article 3: Delivery1. Delivery date: [specify the delivery date].2. Delivery location: [specify the delivery location].3. Risk transfer: The risk of loss or damage to the products shall be transferred to Party B upon completion of delivery.Article 4: Quality and Inspection1. Party A guarantees that the products are in conformity with the contract specifications and are of good quality.2. Party B shall inspect the products within a reasonable period after receipt. Any discrepancies must be reported to Party A immediately.Article 5: Terms of Shipment and Insurance1. The terms of shipment shall be agreed upon by both parties.2. Party A shall be responsible for arranging insurance for the products during transit.Article 6: License and ApprovalIf any license or approval from a government agency is required for the import or export of the products, Party A shall be responsible for obtaining such license or approval.Article 7: Force MajeureIn case of force majeure events, such as natural disasters, war, riots, etc., both parties shall negotiate and adjust their obligations under this contract.Article 8: ConfidentialityBoth parties shall keep confidential all information related to this contract that is not meant for public disclosure.Article 9: Warranty and After-sales ServiceParty A shall provide a warranty period and after-sales service as agreed upon by both parties.Article 10: LiabilitiesEither party's failure to perform its obligations under this contract shall constitute a breach of contract and the breaching party shall be liable for any losses incurred by the other party.Article 11: Settlement of DisputesAny disputes arising from or in connection with this contract shall be settled through friendly consultation. If no settlement can be reached, either party may submit the dispute to [specify the relevant arbitration institution or court] for arbitration or litigation.Article 12: Contract Duration and TerminationThis contract shall be effective from the date of signing by both parties and shall continue for a period of [specify the duration]. Either party may terminate this contract before the expiry date if mutually agreed or in case of a breach by the other party.Article 13:Miscellaneous。

买卖合同英文版4篇全文共4篇示例，供读者参考篇1Purchase AgreementThis Purchase Agreement (the "Agreement") is entered into as of [Date], by and between [Seller], with a mailing address of [Address] (the "Seller"), and [Buyer], with a mailing address of [Address] (the "Buyer").1. Sale of Goods: Seller agrees to sell and Buyer agrees to purchase the goods listed in Exhibit A (the "Goods") in accordance with the terms and conditions of this Agreement.2. Purchase Price: The purchase price for the Goods shall be [Amount] USD. Buyer shall pay the purchase price to Seller in the following manner: [Payment terms].3. Delivery: Seller shall deliver the Goods to Buyer at the location specified in Exhibit A. The delivery date shall be [Date]. Seller shall be responsible for the cost of shipping the Goods.4. Inspection and Acceptance: Buyer shall have [Number] days from the date of delivery to inspect the Goods and notifySeller of any defects or nonconformities. If Buyer fails to notify Seller within the inspection period, the Goods shall be deemed accepted.5. Warranties: Seller warrants that the Goods: (a) conform to the specifications set forth in Exhibit A; (b) are free from defects in materials and workmanship; and (c) are fit for the intended purpose.6. Limitation of Liability: In no event shall Seller be liable for any consequential, incidental, or punitive damages arising out of or in connection with this Agreement.7. Governing Law: This Agreement shall be governed by and construed in accordance with the laws of the State of [State].8. Entire Agreement: This Agreement constitutes the entire agreement between the parties with respect to the purchase and sale of the Goods and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the parties have executed this Agreement as of the date first above written.[Seller]By:Name:Title:[Buyer]By:Name:Title:篇2Sales ContractThis Sales Contract ("Contract") is entered into on this ____ day of __________, 20__ (the "Effective Date") by and between:Seller:Name: [Seller Name]Address: [Seller Address]Contact Number: [Seller Contact Number]Email: [Seller Email]Buyer:Name: [Buyer Name]Address: [Buyer Address]Contact Number: [Buyer Contact Number]Email: [Buyer Email]The Seller desires to sell to the Buyer, and the Buyer desires to purchase from the Seller, certain goods (the "Goods") in accordance with the terms and conditions set forth in this Contract.1. Goods: The Seller shall sell, transfer, and deliver to the Buyer the Goods described below:Description: [Description of Goods]Quantity: [Quantity of Goods]Price: [Price of Goods]2. Payment: The Buyer shall pay the Seller the full purchase price of the Goods upon execution of this Contract. Payment shall be made in [Currency] by [Payment Method]. The Seller shall issue an invoice to the Buyer upon receipt of payment.3. Delivery: The Seller shall deliver the Goods to the Buyer at the following address on or before [Delivery Date]:Address: [Delivery Address]4. Inspection and Acceptance: The Buyer shall have [Number of Days] from the date of delivery to inspect the Goods and notify the Seller in writing of any defects or non-conformities. The Buyer's failure to notify the Seller within the specified timeframe shall constitute acceptance of the Goods.5. Title and Risk of Loss: Title to the Goods shall pass to the Buyer upon delivery. The risk of loss or damage to the Goods shall transfer to the Buyer upon delivery.6. Warranties: The Seller warrants that the Goods are free from defects in materials and workmanship and will conform to the description provided. The Seller makes no other warranties, express or implied.7. Limitation of Liability: In no event shall either party be liable for any indirect, incidental, special, or consequential damages arising out of or in connection with this Contract.8. Governing Law: This Contract shall be governed by and construed in accordance with the laws of the State of [State], without regard to its conflicts of law principles.9. Entire Agreement: This Contract constitutes the entire agreement between the parties with respect to the subjectmatter hereof and supersedes all prior agreements, understandings, negotiations, and discussions.IN WITNESS WHEREOF, the parties hereto have executed this Contract as of the Effective Date.Seller: [Seller Signature]Buyer: [Buyer Signature][Other Terms and Conditions]This Sales Contract is hereby accepted and agreed to by the undersigned on behalf of their respective organizations.[Seller Name]By: _______________________Name: _____________________Title: ______________________[Buyer Name]By: _______________________Name: _____________________Title: ______________________This document constitutes a legally binding contract between the Seller and the Buyer. Each party should thoroughly review the terms and conditions before signing.篇3Purchase AgreementThis Purchase Agreement ("Agreement") is entered into effective as of [Date] by and between [Seller], with a mailing address of [Address], and [Buyer], with a mailing address of [Address], collectively referred to as the "Parties."1. Purchase and Sale of Goods: Seller agrees to sell, and Buyer agrees to purchase, the goods described as [Goods] in the quantity of [Quantity] for the total purchase price of [Purchase Price], as set forth in Exhibit A attached hereto.2. Payment: Buyer shall make payment to Seller in the amount of [Purchase Price] by [Payment Method] within [Number] days of the effective date of this Agreement. Failure to timely pay the full purchase price shall result in default of this Agreement.3. Delivery: Seller shall deliver the goods to Buyer at [Delivery Location] within [Number] days of receipt of payment.Buyer is responsible for all shipping costs associated with the delivery of the goods.4. Inspection: Buyer shall have [Number] days from the date of delivery to inspect the goods. If Buyer finds the goods to be defective or not as described, Buyer may return the goods to Seller for a full refund of the purchase price.5. Warranty: Seller warrants that the goods are free from defects in material and workmanship and conform to the description provided at the time of sale. Seller’s liability under this warranty is limited to the purchase price of the goods.6. Indemnification: Seller agrees to indemnify, defend, and hold harmless Buyer from any claims, liabilities, costs, or damages arising out of the use of the goods.7. Governing Law: This Agreement shall be governed by and construed in accordance with the laws of the State of [State]. Any disputes arising out of this Agreement shall be resolved through arbitration in [City], [State].8. Entire Agreement: This Agreement constitutes the entire understanding between the Parties with respect to the purchase and sale of the goods described herein and supersedes all prior agreements and understandings, whether written or oral.IN WITNESS WHEREOF, the Parties have executed this Agreement as of the date first written above.Seller: [Signature] [Print Name] Date: [Date]Buyer: [Signature] [Print Name] Date: [Date]Exhibit AGoods: [Description] Quantity: [Quantity] Purchase Price: [Purchase Price]篇4Sales ContractThis Sales Contract (hereinafter referred to as the "Contract") is entered into on this [insert date] by and between:Seller: [insert seller's name], with a registered address at [insert address], represented by [insert representative's name], hereinafter referred to as the "Seller".Buyer: [insert buyer's name], with a registered address at [insert address], represented by [insert representative's name], hereinafter referred to as the "Buyer".1. Subject MatterThe Seller agrees to sell, and the Buyer agrees to purchase, the following goods: [insert description of goods], hereinafter referred to as the "Goods".2. Quantity and QualityThe quantity of the Goods to be sold shall be [insert quantity] at a unit price of [insert price]. The Goods shall conform to the specifications agreed upon by both parties and shall be of satisfactory quality.3. DeliveryThe Seller shall deliver the Goods to the Buyer at [insert delivery address] on or before [insert delivery date]. The Buyer shall bear all costs associated with the delivery of the Goods.4. PaymentThe Buyer shall pay the Seller the total amount of [insert total amount] for the Goods upon delivery. Payment shall be made in [insert currency] by [insert payment method].5. Risk and TitleThe risk of loss or damage to the Goods shall pass to the Buyer upon delivery. The title to the Goods shall pass to the Buyer upon full payment.6. Inspection and AcceptanceThe Buyer shall inspect the Goods upon delivery and shall notify the Seller of any defects or non-conformities within [insert number] days. Failure to provide notice shall be deemed acceptance of the Goods.7. WarrantiesThe Seller warrants that the Goods are free from defects and conform to the specifications agreed upon. The Seller shall be liable for any breach of warranty.8. Governing Law and JurisdictionThis Contract shall be governed by the laws of [insert governing law] and any disputes arising out of or in connection with this Contract shall be resolved by arbitration in [insert jurisdiction].In witness whereof, the parties hereto have executed this Contract as of the date first above written.SELLER:____________________________[Signature]BUYER:____________________________ [Signature]。

买卖合同（英文版）8篇篇1SALES CONTRACTThis Sales Contract is made by and between the Buyer and the Seller:Buyer:Name: ________________________Address: ________________________Seller:Name: ________________________Address: ________________________In consideration of the mutual promises and agreements between the Buyer and the Seller, they have agreed to buy and sell the following goods under the terms and conditions stated below:Article of Sale: ______________ (Type and Quality of Goods)Specification: ________________ (Detail the specifications of the goods)Quantity: ________________ (Quantity of the goods to be sold)Price: ________________ (Price per unit or total price of the goods)Terms of Payment: ________________ (Terms and conditions of payment, e.g., T/T in advance, L/C at sight, etc.)Time of Delivery: ________________ (Date of delivery)Place of Delivery: ________________ (Place where the goods are to be delivered)Fumishability and Quality Assurance: The Seller guarantees that the goods are new, of good quality, and suitable for their intended purpose. All specifications are in accordance with the sample/contract. In case of any discrepancy, the Seller shall be responsible for replacement or refund.Packing and Marking: The Seller shall pack the goods properly and ensure that each package is properly labeled with necessary identification marks. The Seller shall bear all costs related to packing and marking.Risk Transfer: The risk of loss or damage to the goods shall be transferred to the Buyer upon delivery at the agreed place. However, if the Buyer fails to take delivery of the goods on time, the risk shall be borne by the Buyer.Inspection and Acceptance: The Buyer shall have the right to inspect and accept the goods upon arrival at the agreed place of delivery. If any defects are found, the Buyer shall notify the Seller immediately and return the goods for replacement or refund.Force Majeure: In case of any delay or failure in performance due to Force Majeure, both parties shall be relieved from liability for non-performance to the extent that such delay or failure is caused by Force Majeure. The party affected shall immediately notify the other party of such occurrence and provide evidence thereof. The affected party shall make every effort to resume performance as soon as possible.Warranty Period: The Seller agrees to provide a warranty period for a period of ________ (specify duration) from the date of delivery for any defects in material or workmanship in the goods sold hereunder. During this period, if any defects are found, the Seller shall promptly replace or repair such goods at its own cost.In witness whereof, the parties have signed this contract at _____________________ on the above mentioned date with their respective signatures.Buyer: _________________________ (Signature)Date: _________________Seller: _________________________ (Signature)Date: _________________Note: This contract is a sample template for reference only and should be customized according to specific needs and circumstances. Before signing any contract, please make sure to consult with legal professionals for advice on legal matters related to your specific situation.篇2SALES CONTRACTThis Sales Contract is made by and between [买方公司名称] (hereinafter referred to as the Buyer) and [卖方公司名称] (hereinafter referred to as the Seller).WHEREAS the Seller is willing to sell and the Buyer is willing to buy the following commodity according to the terms and conditions stipulated below:COMMODITY: ________________ (商品名称及规格)1. ORIGIN OF COMMODITY: The Seller shall sell the commodity mentioned in this Contract from ________________ (产地名称).2. QUALITY AND QUANTITY: The quality and quantity of the commodity shall be as follows: ________________ (商品的质量与数量条款).3. PRICE AND PAYMENT: The Price of the commodity shall be determined as follows: ________________ (商品价格与付款方式条款).4. PACKING AND MARKING: The Seller shall pack the commodity in accordance with the following requirements:________________ (商品包装与标识条款).5. DELIVERY AND TIME OF PERFORMANCE: The Seller shall deliver the commodity within the time as stipulated below:________________ (交货与履约时间条款).6. FORCE MAJEURE: In case where force majeure such as storm, fire, flood, earthquake and epidemic disease occurs, theSeller shall immediately notify the Buyer of such occurrence in writing and be relieved from liability for delay in delivery or non-performance of this Contract. However, the Seller shall make every effort to meet the Buyer’s requirements in respect of delivery time.Seller also has no obligation or responsibility on any claims on reject ions or return of products due to buyer’s purpose change or product design change after contract signed . If buyer has need on changing products specifications after contract signed , it should be confirmed through a written document before mass production starts .篇3SALES CONTRACTThis Sales Contract is made on [Date], between the following two parties:Buyer:Name: _________________________Address: _________________________Country: _________________________Seller:Name: _________________________Address: _________________________Country: _________________________Article 1: Description of the GoodsThe Seller shall sell and the Buyer shall purchase the under mentioned commodity according to the terms and conditions stipulated below:(Here insert detailed description of the goods, including name of commodity, specifications, quantity, and any other necessary details.)Article 2: Price and PaymentThe Price for the goods shall be _______ (insert currency and amount). The Buyer shall make payment through _______ (insert payment method such as wire transfer, letter of credit, etc.) to the Seller's account within _______ (insert payment timeframe, such as 30 days of receipt of invoice).Article 3: DeliveryThe Seller shall deliver the goods to the Buyer at the following place _______ (insert place) within _______ (insert timeframe) from the date of conclusion of this contract. The risk of loss or damage to the goods shall pass to the Buyer upon delivery.Article 4: Quality and InspectionThe Seller shall ensure that the goods are of the agreed quality. The Buyer shall have the right to inspect the goods during production and prior to shipment. If any defects are found, the Seller shall rectify them promptly.Article 5: Terms of ShipmentThe Seller shall arrange for shipment of the goods by _______ (insert mode of transportation such as air, sea, land) at its own cost. The shipping documents required for the export/import of the goods shall be provided by the Seller/Buyer respectively.Article 6: Force MajeureIf either party is prevented from performing its obligations due to force majeure events such as war, riots, natural disasters, etc., the performance of the contract shall be suspended for a reasonable period. If the event lasts for more than _______ (insertperiod such as 3 months), either party may terminate this contract.Article 7: Warranty and After-Sales ServiceThe Seller shall provide a warranty period of _______ (insert period) from the date of delivery for any defects in material or workmanship. During this period, the Seller shall rectify any defects promptly at its own cost. After the warranty period, the Seller shall provide necessary after-sales service at reasonable costs.Article 8: DisputesAny disputes arising from this contract shall be settled through friendly negotiation. If no settlement can be reached, either party may submit the dispute to arbitration under the rules of _______ (insert arbitration institution such as International Chamber of Commerce) in _______ (insert place). The arbitration decision shall be final and binding on both parties.Article 9: MiscellaneaousThis contract is made in _______ (insert language) only. This contract is in duplicate, with each party holding one copy. This contract becomes effective upon signature by both parties. Any modifications or amendments to this contract must be made inwriting and agreed upon by both parties. This contract is valid for a period of _______ (insert duration such as one year) from the date of signing. After its expiration, it may be renewed by mutual agreement.Buyer: _________________________ (Signature)Date: _________Seller: _________________________ (Signature)Date: _________(Note: This document is a template and should be customized to fit specific needs and circumstances before use.)篇4SALES CONTRACTThis Sales Contract is made on [Date], between the following two parties:Buyer:Name: _________________Address: _________________Contact Information: _________________Seller:Name: _________________Address: _________________Contact Information: _________________Article 1: Contract ObjectThe object of this Contract is the sale of the following goods: ________________ (describe the goods, including name, specifications, quantity, and other necessary details).Article 2: Price and PaymentThe total price for the goods is ________________ (specify the total price in a specific currency and amount). Payment terms are as follows: ________________ (describe the payment terms, such as payment in advance, T/T, L/C, etc.).Article 3: Delivery and ShippingThe delivery time for the goods is ________________ (specify the date or time period for delivery). Shipping details shall be arranged by the Seller with the Buyers' carrier of choice. The risk of loss or damage during transportation passes to the Buyer upon delivery.Article 4: Quality and InspectionThe Seller guarantees that the goods shall be in conformity with the contract specifications. The Buyer shall have the right to inspect the goods prior to shipment. If any defects are found, the Seller shall be responsible for rectifying or replacing the goods.Article 5: Force MajeureNeither party shall be liable for failure to perform due to force majeure events, such as natural disasters, wars, riots, or other unforeseeable events. The party affected shall promptly notify the other party of the occurrence of such event.Article 6: ConfidentialityBoth parties shall keep confidential all information related to this Contract that is not in the public domain. Neither party shall disclose confidential information to third parties without the prior written consent of the other party.Article 7: Liabilities and PenaltiesIf either party fails to perform its obligations under this Contract, it shall be liable for any losses incurred by the other party. The parties agree to penalties for late delivery ornon-delivery as follows: ________________ (describe the penalties).Article 8: Settlement of DisputesAny disputes arising from or in connection with this Contract shall be settled through friendly consultation. If no settlement can be reached, either party may submit the dispute to an arbitration institution for arbitration in accordance with its arbitration rules. The arbitration award shall be final and binding on both parties.Article 9: MiscellaneousThis Contract is made in both English and Chinese, with equal validity. This Contract shall be binding on both parties and shall be implemented from the date of signing. Any modifications or supplements to this Contract must be made in writing and shall be subject to the approval of both parties. Any unmentioned matters pertaining to this Contract shall be subject to relevant laws and regulations of the country where the Seller is located.Buyer: _____________________ (Signature)Date: _____________________Seller: _____________________ (Signature)Date: _____________________This Sales Contract is hereby certified as complete and accurate in both English and Chinese. Both parties have reviewed and agree to all terms and conditions stated herein.Note: Please ensure that all information is accurately filled out and that all necessary legal procedures are followed when drafting and signing any contract or agreement. It is advisable to consult with a legal professional before entering into any contractual agreement.篇5SALES CONTRACTThis Sales Contract is made by and between [Buyer’s Full Name] (hereinafter referred to as “Buyer”), and [Seller’s Full Name] (hereinafter refe rred to as “Seller”), whereby the Buyer agrees to buy and the Seller agrees to sell the following products under the terms and conditions stipulated below:I. Product DescriptionThe Seller agrees to sell and the Buyer agrees to purchase the products specified in Annex A, including their specifications, quantity, and quality.II. Price and Payment Terms1. The total contract price shall be [Contract Price] payable in full to the Seller in the currency specified in Annex B.2. The terms of payment are as follows: [Payment Schedule].3. In case of any discrepancies in payment details, the Buyer shall notify the Seller promptly in writing.III. Delivery and Shipping Terms1. The Seller shall deliver the products to the Buyer at the shipping port and date specified in Annex C.2. The Seller shall ensure proper packaging of the products to withstand exposure during shipping and ensure their protection against any damage.3. Any delays in delivery due to causes beyond the Seller’s control shall be promptly reported to the Buyer.IV. Quality Assurance and Inspection1. The Seller shall ensure that the products comply with the specifications and quality standards agreed upon by both parties.2. The Buyer shall have the right to conduct inspections of the products during production and prior to shipment.3. If any defects are found during inspection, the Seller shall promptly replace or repair the defective products at its own cost.V. Risk and Ownership Transfer1. Risk of loss or damage to the products shall pass to the Buyer upon delivery at the specified shipping port.2. Ownership of the products shall transfer to the Buyer upon full payment by the Buyer to the Seller.VI. Warranty and After-Sales Service1. The Seller shall provide a warranty period of [Warranty Period] from the date of delivery for any defects in material or workmanship.2. During the warranty period, the Seller shall, at its own cost, repair or replace any defective products.3. The Seller shall provide after-sales service as specified in Annex D.VII. Force MajeureIf either party is prevented from performing its obligations due to force majeure events, such as natural disasters, wars, riots, or government actions, such party shall promptly notify the other party of the occurrence and duration of such events. The affected party shall use reasonable efforts to overcome such events and resume performance as soon as possible.VIII. ConfidentialityBoth parties shall keep confidential all information related to this contract that is not intended for public disclosure, except as required by law or regulatory authorities.IX. TerminationThis contract may be terminated by either party in case of breach by the other party if such breach is not cured within [specified period] of notification by the non-breaching party.X. Disputes ResolutionAny disputes arising out of or in connection with this contract shall be settled through friendly negotiations between both parties. If no settlement can be reached, such disputes shall be submitted to [specified court/arbitration institution] for resolution.XI. Miscellaneous1. This contract constitutes the entire agreement between the parties on the subject matter hereof and no modifications shall be made unless agreed upon by both parties in writing.2. This contract is made in [number of copies] originals, each with equal legal effect. Each party shall retain one original for its records.3. This contract shall be governed by and construed in accordance with the laws of [specified jurisdiction].篇6SALES CONTRACTThis Sales Contract is made by and between [买方名称], whose registered address is at [买方地址], and [卖方名称], whose registered address is at [卖方地址] (hereinafter referred to as "Buyer" and "Seller" respectively). The Buyer agrees to purchase from the Seller and the Seller agrees to sell to the Buyer the following goods under the terms and conditions stated below:Article 1: Product DescriptionThe Seller shall sell and the Buyer shall purchase the products specified in Annex I to this Contract. The Sellerguarantees that the products are new and in accordance with the specifications mentioned in Annex II to this Contract.Article 2: Price and Payment TermsThe price of the products shall be as stated in Annex I. The payment terms are as follows: [支付条款，例如预付款比例，支付方式（信用证，电汇等），余额支付时间，货币类型等].Article 3: DeliveryThe Seller shall deliver the products to the port specified in Annex I within the time specified therein. The risk of loss or damage to the products shall pass to the Buyer upon delivery.Article 4: Quality AssuranceThe Seller guarantees that the products shall be in conformity with the specifications mentioned in Annex II and shall be free from defects in material and workmanship. In case any defective products are found, the Seller shall be responsible for replacing them free of charge.Article 5: Inspection and TestingThe products shall be inspected and tested by a mutually agreed inspector at the Seller's factory before shipment. Theresults of such inspection and testing shall be final and binding on both parties.Article 6: Force MajeureIf either party is prevented from performing this Contract due to force majeure, it shall immediately notify the other party of the occurrence mentioned above and its consequences. The performance of both parties shall be suspended until the force majeure is removed. If the period of force majeure lasts for more than [天数] days, either party has the right to terminate this Contract.Article 7: Warranty and LiabilitiesThe Seller guarantees that the products shall be merchantable and fit for the purpose intended. If any claim is made against the Buyer by a third party due to any infringement of intellectual property rights arising from the products, the Seller shall be responsible for defending such claim at its own expense.Article 8: Disputes SettlementAny disputes arising out of or in connection with this Contract shall be settled through friendly negotiation between the two parties. If no settlement can be reached, either party maysubmit such disputes to [仲裁机构名称] for arbitration in accordance with its arbitration rules. The arbitration award shall be final and binding on both parties.Article 9: MiscellaneousThis Contract is made in both English and [其他语言]（if applicable）. In case of any discrepancies between the English version and the other versions, the English version shall prevail. This Contract constitutes the entire agreement between the parties on the subject matter hereof and may not be modified except by written agreement signed by both parties. This Contract is governed by the laws of [适用法律的国家或地区].In witness whereof, the parties have executed this Contract in duplicate, with each party retaining one duplicate for their respective records.Buyer: _____________________ (Signature) Date: ________Seller: _____________________ (Signature) Date: ________篇7SALES CONTRACTThis Sales Contract is made by and between [买方名称], whose registered address is at [买方地址], and [卖方名称], whose registered address is at [卖方地址] (hereinafter referred to as "the Seller"). After both parties have fully understood and accepted the terms and conditions set out below, they hereby agree as follows:1. COMMODITYThe Seller shall sell and the Buyer shall purchase the following commodity: [在此处详细描述买卖商品的名称、规格、数量、质量等]。