10.4寸工业液晶显示器

工业显示器的选择目前大量的LCD 产品中，制造工艺不尽相同，也并非所有都能应用在各个领域。

为了给LCD 和应用提供一个最佳的匹配，了解明确的目标市场及其特殊的设计要求非常重要。

例如，很多的显示器都是为消费应用设计和制造的，包括笔记本电脑，台式电脑和低端台式电脑的显示器。

然而，由于非常有竞争力的价格和实时市场因素，普通模块并不满足持久性，可靠性和那些工业环境所要求的高级特性。

在消费应用上产品的生命周期通常尤其短暂。

因此为这些应用而设计和制造的显示器一般只可使用1～2 年。

在过去的几年中，L C D已经在工业显示应用上取代了CRT，包括一些像工业自动系统和测试测量设备这样的领域。

对比CRT 显示器，L C D 为工业市场提供了更多方便，特别是在空间、可读性和持续性这些关键标准的选择方面。

一．空间限制空间问题，是工业领域的设计者需要考虑的一个显著因素。

LCD 在这方面优势明显，因为他们比 C R T 提供了更多的灵活性并且更薄，这些因素可以使他们更加容易在工业设备上找到合适的位置。

另一方面，CRT 的一些附带产品，需要占地较多，而且还要安置在工厂特定的地方。

另外，L C D 的装置设计更具可携带性，因此能灵活支持以前同等条件下贵重设备才能完成的工作。

二．可读性显示器的可读性是L C D 的另一个亮点。

重要的是，在工业应用上的显示器需要在一个强光环境下，从多角度支持清晰和精确的视觉效果。

绝大多数工业环境都是一个被强光包围的环境，这样就对显示的可读性提出了挑战。

环境越亮，L C D 的传送就越困难，因为人们的标准可读亮度在2 5 0 ～300cd/m2。

一些LCD 的制造者试图将范围扩展到450cd/m2 以上。

但是这些显示需要更多的能量而且这也不是最好的解决办法。

再者这些亮度水平还不足以在非常高亮的环境下发挥作用。

在高亮环境下提高显示器的可读性的解决办法之一就是不增大功耗的前提下提高对比度。

非工业环境下，典型的对比度范围是200:1～300:1，这对于机器操作者在一定距离外观看显示器是不够的。

SESC-400R型环境监测数据采集传输系统介绍1.总体介绍SESC-400R型环境监测数据采集传输系统是由我公司开发的环境监测数据采集传输系统，由嵌入式设备、工业电源、MODEM、触控液晶显示屏、机柜及上、下端数据采集处理传输等组成。

本系统已在福建省污染源点位成功稳定运行。

SESC-400R环境监测数据采集传输系统为福建省重点污染源自动监控系统提供了一套总体解决方案。

带有 Windows 的嵌入式控制器是一套满足此应用需求的完整解决方案。

它的无风扇和紧凑机械设计非常适合安装在污染源现场和小型车辆中，抗振和抗冲击设计使得它比常规工业 PC 更为可靠和耐用。

数据采集传输仪带有6个串行通讯端口的嵌入式控制器和模拟量输入模块结合在一起，支持与各种监测仪表连接，可以使此系统的安装极为快速和简单。

嵌入式控制器还带有 8 个2000Vdc隔离的数字量输入通道和 8 个2000Vdc 隔离的数字量输出通道，可以用于仪表运行开关机监测反控及监测点位电机、阀门或开关状态。

数据采集传输仪通过RJ45网络接口连接到ADSL宽带或GPRS，用于将测量和监控数据发送回中心数据服务器。

嵌入式控制器运行的操作系统是安装在抗振SD 半导体存储器上的 Microsoft Windows CE .NET或Linux系统。

2.硬件系统介绍SESC-400R型数据采集传输系统硬件设备由嵌入式控制器、电源、机柜等组成：一、数据采集传输嵌入式控制器SESC-400R型环境监测监控数据采集传输仪采用三星公司专为嵌入式应用需要而设计的三星S3C-2440型无风扇高性能低功耗嵌入式控制器。

1、三星 S3C-2440简介S3C-2440采用ARM 9架构的400MHz高性能低功耗工业嵌入式CPU，整机密封无风扇结构设计，铝合金外壳散热，除配套电源风扇外无任何机械转动。

高集度成设计，板载1个10/100M RJ45网络接口、4个标准RS232串口、2个带2000Vdc光电隔离保护的RS485/422/232串口、8路带2000Vdc光电隔离保护的数字量输入接口和8路带2000Vdc光电隔离保护的数字量输出接口、看门狗定时器等，是用于数据采集传输应用的理想解决方案。

REV.SPEC. NUMBER ISSUE DATEPAGETFT- LCDPRODUCT GROUPOF 28HEFEI BOE OPTOELECTRONICS TECHNOLOGYS8-*P0PROPRIETARY NOTETHIS SPECIFICATION IS THE PROPERTY OF BOE HF AND SHALL NOT BEREPRODUCED OR COPIED WITHOUT THE WRITTEN PERMISSION OF BOE HF AND MUST BE RETURNED TO BOE HF UPON ITS REQUESTITEM SUPPLIER SIGNATURE DATEPreparedReviewedApproved1 BUYER SUPPLIER HEFEI BOE Optoelectronics Technology CO., LTD FG-CodeBA104S01-300(ET104S0M-N10-3850)ITEM BUYER SIGNATURE DATES8- 2018-4-8BA104S01-300Product Specification Rev.P0BA104S01-300 Product SpecificationOF 28REVISION HISTORYS8-*2 REV.ECN No. DESCRIPTION OF CHANGESDATEPREPAREDP0Initial Release2018-4-8王兵P1 2018-6-12 王兵OF 28 S8-* 3BA104S01-300 Product SpecificationContentsNo. Items Page1.0 General Description *2.0 Absolute Maximum Ratings3.0 Electrical Specifications4.0 Optical Specifications5.0 Reliability Test6.0 Packing Information7.0 Product Label8.0 Handling & Cautions9.0 AppendixOF 28BA104S01-300 Product Specification S8-*4 1.0 GENERAL DESCRIPTION1.1 IntroductionBA104S01-300 is a color active matrix TFT LCD module using amorphous silicon TFT‘s (Thin Film Transistors) as an active switching devices. This module has a 10.4 inch diagonally measured active area with SVGAresolutions (800 horizontal by 600 vertical pixel array). Each pixel is divided into RED, GREEN, BLUE dots which are arranged in vertical stripe and this module can display 16.7M colors .1.2 Features● 0.5T Glass （Single ）; ● Module Design● 6/ 8bits LVDS data input selection ● Thin and light weight● High luminance and contrast ratio, low reflection and wide viewing angle ● RoHS compliantSignal Input ConnectorBLU Input ConnectorDC/DC ConverterTFT LCD 800*600ICLED driverLED Light BarLVDS SignalLCD PowerVLEDTiming ControllerOF 28BA104S01-300 Product Specification S8-*5 ParameterSpecificationUnit RemarksActive Area 211.2(H)*158.4(V) mm Number Of Pixels 800(H)×600(V)pixels Pixel Pitch 0.264(H)×RGB ×0.264(V) mmPixel Arrangement Pixels RGB stripe arrangement Display Mode Normally White Display Colors 16.2M(8bits) colors 6+2Display Mode Transmissive modeSurface Treatment AG25（CF ），Clear （TFT ） Contrast Ratio 800:1(typ.) Viewing Angle(CR>10) 80/80/65/75(typ.) deg. Response Time 30(typ.) ms Color Gamut 55%Brightness300(min)/350(typ) cd/m2Brightness Uniformity 9 point: min 70% 9 point: typ 80%Power Consumption LCD: 0.58(Max.)(Black Pattern) BLU: 1.98W(Max.)watt Outline Dimension 236(H)*176.9(V)*5.6(typ)(LCM) mm Weight300(Max.)gram1.3 ApplicationMedical & Industrial application1.4 General SpecificationThe followings are general specifications at the ** ********<Table 1. LCD Module Specifications>OF 28BA104S01-300 Product Specification S8-*6 2.0 ABSOLUTE MAXIMUM RATINGSThe followings are maximum values which, if exceed, may cause faulty operation ordamage to the unit. The operational and non-operational maximum voltage and current values are listed in Table 2.< Table 3. Absolute Maximum Ratings>Note : 1) Temperature and relative humidity range are shown in the figure below.Wet bulb temperature should be 39 ℃ max. and no condensation of water.ParameterSymbol Min. Max. Unit RemarksPower SupplyLCD Module VDDVSS-0.33.9VTa = 25 ℃VLED VSS-0.343 V BLUILED - 25 mA Operating Temperature T OP -20 +70 ℃ Note 1Storage TemperatureT ST-30+80℃OF 28BA104S01-300 Product Specification S8-*7 3.0 ELECTRICAL SPECIFICATIONS3.1 TFT LCD Module< Table 4. LCD Module Electrical specifications > [Ta =25±2 ℃]Notes : 1. The supply voltage is measured and specified at the interface connector of LCM.The current draw and power consumption specified is for VBAT=3.8V, Frame rate f V =60Hz and Clock frequency = 156.8MHz. Test Pattern of power supply current a) Typ : Mosaic 8 x 6 Pattern(L0/L255) b) Max : Black2. The duration of rush current is about 2ms and rising time of Power Input is 1ms(min)ParameterSymbol ValuesUnit NotesMin. Typ. Max.Power Supply Voltage VDD 3.0 3.3 3.6 V Power Supply Current IDD 120 150 180 mA BLU Supply Voltage VLED 11.5 12 12.5 V BLU Supply Current ILED - 120 - mA Power Consumption PLCD 0.4 0.495 0.59 W BLU Power ConsumptionPBLU- -1.98WOF 28BA104S01-300 Product Specification S8-*8 3.2 Back-Light UnitTable 5. LED Driver Electrical Specifications >[Ta =25±2 ℃]Notes: 1. ILED=4*25mA=100mA ，4Parallel*6StringPLED = VLED ×ILED (Without LED converter transfer efficiency)2. The life time of LED, 30,000Hrs, is determined as the time at which luminance of the LED is 50% compared to that of initial value at the typical LED current on condition of continuous operating at 25 2°C.Parameter Symbol ValuesUnit NotesMin. Typ. Max. LED Supply Voltage VLED - 19.2 19.8 V VRP 300 mV Ripple LED Forward Current ILED - 25 - mA Note 1Power Consumption PLED - 1.921.98 W BLU on/off LevelBLU on 3 3.6 V BLU off 0 0..5 V PWMINLevelHigh Level 3 3.6 V Low Level 0 0.5 V Frequency F PWM 200 - 20K Hz Duty RatioD PWM 1 - 100 % LED Quantity QLED - 24 - EA LED Life TimeTLED30000- -HrsNote 2OF 28 S8-* 9BA104S01-300 Product Specification3.4 INPUT TERMINAL PIN ASSIGNMENTThis LCD employs two interface connections, a 20 pin ZIF connector is used for the LCD module electronics interface and a 5 pin ZIF connector is used for the internal backlight system.3.4.1 Pin assignment for LCD moduleConnector : MSB24013P20 _HA(STM) or equivalent< Table7. Pin Assignment for LCD Module Connector > Pin No. Symbol Description I/O1 VCC Power supply P2 VCC Power supply P3 GND Ground -4 SEL VCC:8Bits; GND/NC:6Bits I5 RIN0- LVDS signal input I6 RIN0+ LVDS signal input I7 GND Ground -8 RIN1- LVDS signal input I9 RIN1+ LVDS signal input I10 GND Ground -11 RIN2- LVDS signal input I12 RIN2+ LVDS signal input I13 GND Ground -14 CLKIN- LVDS clock input I15 CLKIN+ LVDS clock input I16 GND Ground -17 RIN3- LVDS signal input I18 RIN3+ LVDS signal input I19 NC No connection I20 NC/GND Test function -OF 28BA104S01-300 Product Specification S8-*10 Pin No Symbol Description Remarks1 NC No connection 2PWMLuminance control3 EN 3.3V-on / 0V-off4 GND Ground 5VLEDPower supply12V3.4.2 Pin assignment for LED BarConnector : MSB24038P5 (STM) or equivalent< Table8. Pin assignment for LED Bar >OF 28BA104S01-300 Product Specification S8-*11 ParameterSymbolMinTypMaxUnitConditionSupply currentI DD - 75 - mA LVDS DC specifications Differential input high threshold V TH - - +100 mV V IC =1.2VDifferential input low threshold V TL -100 - - mV LVDS common mode voltage V IC 0.7 - 1.6 V LVDS swing voltageV ID±100-±600mV3.5.2 DC Specification< Table11. DC Specification >LVCLKNLVCLKPLVCLKP-LVCLKN0VGNDV IDV ICV ID< LVDS V ID and V IC definition>OF 28 12OF 28BA104S01-300 Product SpecificationS8-* 13Item Symbol min typ max UNITLCD Frame Rate - - 60 - Hz Pixels Rate - 37.69 37.879 38.068 MHzTiming HorizontalHorizontal total time tHP - 1056 - t CLKHorizontal Active time tHadr800 t CLK Horizontal Back Porch tHBP88 t CLKHorizontal Front Porch tHFP 40 t CLK VerticalVertical total time tvp 628 t HVertical Active time tVadr 600 t HVertical Back Porch tVBP 23 t HVertical Front Porch tVFP 1 t HLane - 1 - Lane3.6 Interface timing Parameter< Table13. Timing Parameter >OF 28BA104S01-300 Product SpecificationS8-*14 ParameterValueUnits Min. Typ. Max. T1 0.1 - 5 (ms) T2 10 - 30 (ms) T3 5 - 100 (ms) T4 200 - - (ms) T5 200 - - (ms) T6 0 - 50 (ms) T7 0 - 10 (ms) T8500--(ms)[Ta =25±2 ℃]T7Interface Signal (LVDS/MIPI/eDP)Power for LEDPower Supply VDD90% 10%10%0V 90%T 1 T 2T 6 Valid video0VOFFOFFLED ONT 8T 3T 5Tcon Reset T 43.7 Power Sequence< Table15. Sequence Table >OF 28BA104S01-300 Product SpecificationS8-*4.2 Optical Specifications < Table16. Optical Table >15 4.0 OPTICAL SPECIFICATIONS4.1 OverviewThe test of optical specifications shall be measured in a dark room (ambient luminance ≤1lux and temperature = 25±2℃) with the equipment of Luminance meter system (Gonio meter system and TOPCON BM-5) and test unit shall be located at an approximate dista nce 50cm from the LCD surface at a viewing angle of θ and Φ equal to 0︒. We refer to θØ=0 (=θ3 ) as the 3 o’clock direction (the “right”), θØ=90 (= θ12 ) as the 12 O’clock direction (“upward”), θØ=180 (= θ9 ) as the 9 O’clock direction (“left”) and θØ=270(= θ6 ) as the 6 O’clock direction (“bottom”). While scanning θ and/or Ø, the center of the measuring spot on the Display surface shall stay fixed.Item Symbol Condition Min Typ. Max Unit Note luminance Bp θ=0°300 350 -- cd/m2 Note 1 Brightness Uniformity△Bp 70 80 -- %Note 2Viewing AngleθLCr≥10 70 80 -- degNote 3θR 70 80 -- ψT 55 65 -- ψB65 75 --Contrast Ratio Cr θ=0° FF=0° 600 800 - Note 4 Response TimeTr+Tf - 30 35 msNote 5Color Coordinate ofCIE1931Rx θ=0° 0.574 0.604 0.634 -Note 6Ry 0.296 0.326 0.356 Gx0.279 0.309 0.339 Gy 0.548 0.578 0.608 Bx 0.119 0.149 0.179 By 0.070 0.100 0.130 Wx 0.254 0.284 0.314 Wy0.290 0.320 0.350 NTSC Ratio NTSC CIE1931 5055 --% Note 7Polarization Direction of Front Polarizer PdF 45° degNote 8Polarization Direction of Rear Polarizer PdR45° DegGray inversion angle6点钟Note 9OF 28 S8-* 16BA104S01-300 Product SpecificationNote1:Luminance measurementThe test condition is at ILED=100mA and measured on the surface of LCD module at 25℃.●The data are measured after LEDs are lighted on for more than 5 minutes and LCM displays are fully white. The brightness is the center of the LCD. Measurement equipment CS2000 or similar equipments (Field of view:1deg,Distance:50cm)●Measuring surroundings: Dark room.●Measuring temperature: Ta=25℃.●Adjust operating voltage to get optimum contrast at the center of the display.●Measured value at the center point of LCD panel must be after more than 5 minutes while backlight turning on.Note2:Uniformity●The test condition is at ILED=100mA and measured on the surface of LCD module at 25℃.●Measurement equipment:CS2000 or similar equipments●The luminance uniformity is calculated by using following formula:●△Bp = Bp (Min.) / Bp (Max.)×100 (%)●Bp (Max.) = Maximum brightness in 9 measured spots●Bp (Min.) = Minimum brightness in 9 measured spots.OF 28BA104S01-300 Product SpecificationS8-*17 Note 3:The definition of Viewing AngleRefer to the graph below marked by θ and Ф.Note4:ThedefinitionofContrastRatio (Test LCM using CS2000 or similar equipments):Luminance When LCD is at “White” stateContrast Ratio(CR)=Luminance When LCD is at “Black” state(Contrast Ratio is measured in optimum common electrode voltage)Note5:DefinitionofResponse time.(Test LCD using DMS501 or similar equipments):The output sign also photo detector are measured when the input sign also are changed from “black ” to “white”(Voltage falling time)and from “white” to “black” (Voltage rising time), respectively .The response time is defined as the time interval between the 10% and 90% of amplitudes . Refer to fi gures below.Response time of gray to gray:Measurement equipment: DMS501 or similar equipments.Test method: we define 8 grays L0-L7,the grays of L0-L7 were defined as:0,36,73, 109, 146, 182, 219, 255. Theoutputsignalsofphotodetectoraremeasuredwhentheinputsignalsarechanged from “Lx” to “Ly”, x, y= [0, 7]. The response time is defined as the time interval between the 10% and 90% of amplitudes. The result of the test can be noted as below:L0 L1 L2 L3 L4 L5 L6 L7 L0 L1 L2 L3 L4 L5 L6 L7OF 28 S8-* 18BA104S01-300 Product SpecificationNote 6: Color Coordinates of CIE 1931The test condition is at ILED=100mA and measured on the surface of LCD module at 25℃. Measurement equipment:CS2000 or similar equipmentsThe Color Coordinate (CIE 1931) is the measurement of the center of the display shown in below figure. Note 7: Definition of Color of CIE Coordinate and NTSC Ratio.Note 8: Polarization Direction Definition●Viewing direction is normal user viewing direction which is vertical to the display surface●The polarizer which is closer to viewer is defined as Front Polarizer●The polarizer which is on the rear side of viewer is defined as Rear Polarizer●The X axis is defined as parallel line to top & bottom sidelines of the Active Area●PdF which is marked in blue arrow is polarization degree of Front polarizer●PdB which is marked in red arrow is polarization degree of Back polarizer●The polarization degree parameter must be indicated in range of 0deg to 180deg according to above definitionOF 28BA104S01-300 Product SpecificationS8-*19 Note 9: Definition of gray inversion angle ●Refer to the graph of note 9. ●Using luminance test method. ●Test pattern : 128 gray●If the viewing direction is 12 o’clock ,then test the luminance while θ=-60°,θ=-50°, θ=-40°, θ=-30°, θ=-20°, θ=-10°, θ=0°, θ=10°, θ=20°, θ=30°, θ=40°, θ=-50°, θ=60°. The luminance test as figure below:50100150200-100-5050100-60-50-40-30-20-10010OF 28 S8-* 20BA104S01-300 Product Specification5.0 RELIABLITY TESTThe Reliability test items and its conditions are shown in below.<Table 17. Reliability Test Parameters >No Test Items Conditions1 High temperature storage test 80℃，240hr2 Low temperature storage test -30℃，240hr3 High temperature & high humidity(operation test) 60℃，90%RH，240hr4 Low temperature operation test -20℃，240hr5 High temperature operation test 70℃，240hr6 Thermal Shock Test -40℃~85℃，1hr/cycle，100cycle7 ALT -10℃~65℃，0%~93%，24hr/cycle，10 cycle8 PCT 121℃，100%RH，2atm，12hr9 ESD 150pF，330Ω，±6kV(Contact)，±8kV（Air）10 Packing VIB 1.47G，1-200hz，X，Y，±Z，30min/AxisOF 28BA104S01-300 Product Specification S8-*21 6.1 Packing Note(产品形态：LCM)• Box Dimension: 500mm(W) x 400mm(D) x 300mm(H) • Package Quantity in one Box: 28pcsPacking procedure:6.0 PACKING INFORMATION(产品形态： )-.Put 1pcs Panel into PE Bag Crimp PE Bag opening-. Insert 1pcs panel horizontally into the slot -. 28pcs Panel /EPE Box-. Put 1pcs EPE cover upon EPE box -.Put EPE Box& EPE cover into Inner Box -. 28pcs Panel /Inner Box-. 4 layers/ Pallet -. 4 boxes/ Layer-. 448pcs Panel / PalletOF 28BA104S01-300 Product SpecificationS8-* 226.2 Box label (产品形态： )• Label Size :115mm*55mm• ContentsModel : LCMQ`ty : 28pcs/BoxSerial No. : Box Serial No. as shown below.Date : Packing DateFG Code : FG Code of ProductXXXXXXXXXXXXX 2820XX / XX/ XX xxxx1 23 45No. 1 2 3 4 5 6 7 8 9 10 11 12 13 Code X X S 3 1 8 B 0 0 0 1 H D GBN Grade B3 Year Month Rev Serial number BA104S01-300OF 28BA104S01-300 Product SpecificationS8-*7.0 Product LabelBOE MDL ID rule123 4Label Size: 48mmx12mmx0.08mm, 44-92310071. Customer Code2. MDL ID bar code3. MDL ID4. FG-CODE First 12 digitsNo. 1 2 3 4 5 6 7 8 9 10 11 121314151617Code X X S 3 8 3 2 D 8 5 0 0 0 0 0 2 1 GBN Grade B3 Year Month Day FG Code last four digits Serial number23OF 28 S8-* 24BA104S01-300 Product Specification8.0 Handling & Cautions8.1 Mounting Method● The panel of the LCD consists of two thin glasses with polarizers which easily getdamaged. So extreme care should be taken when handling the LCD.● Excessive stress or pressure on the glass of the LCD should be avoided. Care must betaken to insure that no torsional or compressive forces are applied to the LCD unitwhen it is mounted.● If the customer's set presses the main parts of the LCD, the LCD may show the abnormaldisplay. But this phenomenon does not mean the malfunction of the LCD and should bepressed by the way of mutual agreement.● To determine the optimum mounting angle, refer to the viewing angle range in thespecification for each model.● Mount a LCD module with the specified mounting parts.8.2 Caution of LCD Handling and Cleaning●Since the LCD is made of glass, do not apply strong mechanical impact or static loadonto it. Handling with care since shock, vibration,and careless handling may seriouslyaffect the product. If it falls from a high place or receives a strong shock, the glass maybe broken.● The polarizers on the surface of panel are made from organic substances. Be verycareful for chemicals not to touch the polarizers or it leads the polarizers to be deteriorated.● If the use of a chemical is unavoidable, use soft cloth with solvent（recommended below）to clean the LCD‘s surface with wipe lightly.-IPA(Isopropyl Alcohol), Ethyl Alcohol, Trichlorotriflorothane● Do not wipe the LCD's surface with dry or hard materials that will damage the polarizersand others. Do not use the following solvent.-Water, Ketone, Aromatics● It is recommended that the LCD be handled with soft gloves during assembly, etc. Thepolarizers on the LCD's surface are vulnerable to scratch and thus to be damaged bysharp particles.● Do not drop water or any chemicals onto the LCD's surface.● A protective film is supplied on the LCD and should be left in place until the LCD isrequired for operation.● The ITO pad area needs special careful caution because it could be easily corroded.Do not contact the ITO pad area with HCFC,Soldering flux,Chlorine,Sulfur,saliva orfingerprint. To prevent the ITO corrosion, customers are recommended that the ITOarea would be covered by UV or silicon.OF 28 S8-*BA104S01-300 Product Specification258.3 Caution Against Static Charge● The LCD modules use C-MOS LSI drivers, so customers are recommended that any unused input terminal would be connected to Vdd or Vss, do not input any signals beforepower is turn on, and ground you body, work/assembly area, assembly equipments toprotect against static electricity.● Remove the protective film slowly, keeping the removing direction approximate30-degree not vertical from panel surface, If possible, under ESD control device likeion blower, and the humidity of working room should be kept over 50%RH to reduce therisk of static charge.● Avoid the use work clothing made of synthetic fibers. We recommend cotton clothing orother conductivity-treated fibers.● In handling the LCD, wear non-charged material gloves. And the conducting wrist to theearth and the conducting shoes to the earth are necessary.8.4 Caution For operation● It is indispensable to drive the LCD within the specified voltage limit since the higherVoltage than the limit causes the shorter LCD's life. An electro-chemical reaction due toDC causes undesirable deterioration of the LCD so that the use of DC drive should avoid.● Do not connect or disconnect the LCD to or from the system when power is on.● Never use the LCD under abnormal conditions of high temperature and high humidity.● When expose to drastic fluctuation of temperature (hot to cold or cold to hot）,theLCD may be affected; Specifically, drastic temperature fluctuation from cold to hot ,produces dew on the LCD's surface which may affect the operation of the polarizer and the LCD.● Response time will be extremely delayed at lower temperature than the operatingtemperature range and on the other hand at higher temperature LCD may turn black attemperature above its operational range. However those phenomena do not meanmalfunction or out of order with the LCD. The LCD will revert to normal operation oncethe temperature returns to the recommended temperature range for normal operation.● Do not display the fixed pattern for a long time because it may develop image stickingdue to the LCD structure. If the screen is displayed with fixed pattern, use a screen saver.OF 28S8-*BA104S01-300 Product Specification268.5 Packaging●Modules use LCD element, and must be treated as such.-Avoid intense shock and falls from a height.-To prevent modules from degradation, do not operate or store them exposed directly to sunshine or high temperature/humidity for long periods.8.6 Storage● A slight dew depositing on terminals is a cause for electro-chemical reaction resultingin terminal open circuit. Relative humidity of the environment should therefore be keptbelow 60%RH.●Original protective film should be used on LCD’s surface (polarizer). Adhesive typeprotective film should be avoided, because it may change color and/or properties ofthe polarizers.● Do not store the LCD near organic solvents or corrosive gasses.● Keep the LCD safe from vibration, shock and pressure.● Black or white air-bubbles may be produced if the LCD is stored for long time in thelower temperature or mechanical shocks are applied onto the LCD.● In the case of storing for a long period of time for the purpose or replacement use,the following ways are recommended.-Store in a polyethylene bag with sealed so as not to enter fresh air outside in it.-Store in a dark place where neither exposure to direct sunlight nor light is.-Keep temperature in the specified storage temperature range.-Store with no touch on polarizer surface by the anything else. If possible, store the LCDin the packaging situation LCD when it was delivered.8.7 Safety● For the crash damaged or unnecessary LCD, it is recommended to wash off liquid crystalby either of solvents such as acetone and ethanol an should be burned up later.● In the case the LCD is broken, watch out whether liquid crystal leaks out or not. If yourhands touch the liquid crystal, wash your hands cleanly with water an soap as soonas possible.● If you should swallow the liquid crystal, first, wash your mouth thoroughly with water,then drink a lot of water and induce vomiting, and then, consult a physician.● If the liquid crystal should get in your eyes, flush your eyes with running water for atleast fifteen minutes.● If the liquid crystal touches your skin or clothes, remove it and wash the affected partof your skin or clothes with soap and running water.27OF 28 S8-*BA104S01-300 Product Specification9.0 APPENDIXMechanical DrawingDrawing Attachment: FrontBA104S01-300 Product SpecificationMechanical DrawingDrawing Attachment: Back。

( V ) Preliminary Specifications( ) Final SpecificationsModule 10.4 Inch Color TFT-LCD Model Name G104STN01.0Customer Date Checked &Approved by Approved by DateGrace Hung 2013/08/16 Prepared byJohnson Lin 2013/08/16 General Display Business Division / AU Optronics corporationContents1. Operating Precautions (4)2. General Description (5)2.1 Display Characteristics (5)2.2 Optical Characteristics (6)3. Functional Block Diagram (9)4. Absolute Maximum Ratings (10)4.1 Absolute Ratings of TFT LCD Module (10)4.2 Absolute Ratings of Environment (10)5. Electrical Characteristics (11)5.1 TFT LCD Module (11)5.2 Backlight Unit (13)6. Signal Characteristics (14)6.1 Pixel Format Image (14)6.2 Scanning Direction (14)6.3 TFT-LCD Interface Signal Description (15)6.4 The Input Data Format (16)6.5 TFT-LCD Interface Timing (17)6.6 Power ON/OFF Sequence (18)7. Connector & Pin Assignment (19)7.1 TFT-LCD Signal (CN1): LVDS Connector (19)7.2 LED Backlight Unit (CN2): Driver Connector (19)7.3 LED Backlight Unit (CN4): Light bar Connector (19)8. Reliability Test Criteria (20)9. Mechanical Characteristics (21)9.1 LCM Outline Dimension (Front View) (21)9.2 LCM Outline Dimension (Rear View) (22)10. Label and Packaging (23)10.1 Shipping Label (on the rear side of TFT-LCD display) (23)10.2 Carton Package (23)11 Safety (25)11.1 Sharp Edge Requirements (25)11.2 Materials (25)11.3 Capacitors (25)11.4 National Test Lab Requirement (25)Record of RevisionVersion and Date Page Old description New Description1. Operating Precautions1) Since front polarizer is easily damaged, please be cautious and not to scratch it.2) Be sure to turn off power supply when inserting or disconnecting from input connector.3) Wipe off water drop immediately. Long contact with water may cause discoloration orspots.4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped onhard surface.6) To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before handlingTFT-LCD Module.7) Do not open nor modify the module assembly.8) Do not press the reflector sheet at the back of the module to any direction.9) In case if a module has to be put back into the packing container slot after it was takenout from the container, do not press the center of the LED light bar edge. Instead, press at the far ends of the LED light bar edge softly. Otherwise the TFT Module may be damaged.10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nortilt the Interface Connector of the TFT Module.11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a veryshort time. Please design your display product well to avoid external force applying to module by end-user directly.12) Small amount of materials without flammability grade are used in the TFT-LCD module. TheTFT-LCD module should be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be applied exemption.13) Severe temperature condition may result in different luminance, response time and lampignition voltage.14) Continuous operating TFT-LCD display under low temperature environment may acceleratelamp exhaustion and reduce luminance dramatically.15) The data on this specification sheet is applicable when LCD module is placed in landscapeposition.16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to usescreen saver or shuffle content periodically if fixed pattern is displayed on the screen.2. General DescriptionThis specification applies to the Color Active Matrix Liquid Crystal Display G104STN01.0composed of a TFT-LCD display, a driver and power supply circuit, and a LED backlight system. The screen format is intended to support SVGA (800(H) x 600(V)) screen and 16.2M (RGB 8-bits) or 262k colors (RGB 6-bits).LED driving board for backlight unit is included in G104STN01.0 and the LED unit is replaceable. All input signals are LVDS interface and compatible with G104SN02 V2.G104STN01.0 designed with wide viewing angle; wide temperature and long life LED backlight is well suited for industial applications. G104STN01.0 is a RoHS product.2.1 Display CharacteristicsThe following items are characteristics summary on the table under 25 ℃ condition: ItemsUnitSpecifications Screen Diagonal [inch] 10.4Active Area [mm] 211.2 (H) x 158.4 (V) Pixels H x V 800 x 3(RGB) x 600 Pixel Pitch [mm] 0.264 x 0.264 Pixel Arrangement R.G.B. Vertical Stripe Display ModeTN, Normally White Nominal Input Voltage VDD [Volt] 3.3 (typ.) Typical Power Consumption [Watt] 2.88WAll black pattern Weight [Grams] 365(Typ.)Physical Size [mm] 243.0(H) x 184.0(V) x 6.5(D)(Typ.) Electrical Interface 1 channel LVDS Surface Treatment Anti-glare, Hardness 3H Support Color16.2M / 262K colors Temperature Range OperatingStorage (Non-Operating) [o C] [o C]-20 to +80 -20 to +80 RoHS ComplianceRoHS Compliance2.2 Optical CharacteristicsThe optical characteristics are measured under stable conditions at 25 (Room Temperature):℃Item Unit Conditions Min. Typ. Max. RemarkWhite Luminance[cd/m2] I F = 50mA/1 LED Line (center point) 300 400 -1 Uniformity % 5 Points 65 75 -2,3 Contrast Ratio500 700 - 4[msec]Rising - 10 20 [msec] Falling- 5 15 Response Time[msec] Raising + Falling - 15 35 5 [degree] [degree] Horizontal (Right) CR = 10 (Left) 70 70 80 80 - - Viewing Angle[degree] [degree]Vertical (Upper) CR = 10 (Lower) 50 60 60 70 - - 6 Red x - TBD - Red y - TBD - Green x- TBD - Green y - TBD - Blue x - TBD - Blue y - TBD - White x 0.28 0.31 0.34 Color / ChromaticityCoordinates (CIE 1931)White y0.30 0.33 0.36 Color Gamut%50-Note 1: Measurement method Equipment Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent) Aperture1with 50cm viewing distance ∘Test Point CenterEnvironment < 1 luxModule Driving EquipmentNote 2: Definition of 5 points position (Display active area: 211.2mm (H) x 158.4mm (V))Note 3: The luminance uniformity of 5 points is defined by dividing the minimum luminance values by the maximum test point luminanceNote 4: Definition of contrast ratio (CR):Note 5: Definition of response time:The output signals of photo detector are measured when the input signals are changed from “White” to “Black” (falling time) and from “Black” to “White” (rising time), respectively. The response time interval isNote 6: Definition of viewing angleViewing angle is the measurement of contrast ratio 10, at the screen center, over a 180° horizontal and ≧180° vertical range (off-normal viewing angles). The 180° viewing angle range is broken down as below: 90° (θ) horizontal left and right, and 90° (Φ) vertical high (up) and low (down). The measurement direction is typically perpendicular to the display surface with the screen rotated to its center to develop the desiredMinimum Brightness of five pointsδW9 = Maximum Brightness of five points Contrast ratio (CR)=Brightness on the “White” stateBrightness on the “Black” statemeasurement viewing angle.3. Functional Block DiagramThe following diagram shows the functional block of the 10.4 inch color TFT/LCD module:4. Absolute Maximum Ratings4.1 Absolute Ratings of TFT LCD ModuleItem Symbol Min Max Unit Logic/LCD Drive Voltage Vin -0.3 +4.0 [Volt]4.2 Absolute Ratings of EnvironmentItem Symbol Min Max Unit Operating Temperature TOP -20 +80 [o C] Operation Humidity HOP 5 95 [%RH] Storage Temperature TST -20 +80 [o C] Storage Humidity HST 5 95 [%RH] Note: Maximum Wet-Bulb should be 39℃ and no condensation.5. Electrical Characteristics 5.1 TFT LCD Module5.1.1 Power SpecificationSymbol Parameter Min Typ Max Units RemarkVDD Logic/LCD Input Voltage 3.0 3.3 3.6 [Volt]I VDD LCD Input Current - 320 - [mA]VDD=3.3V at 60 HZ, all Black PatternP VDD LCD Power comsumption - - 1.5 [Watt] VDD=3.3V at 60 HZ, all Black Pattern I rush LCDLCD Inrush Current-1.06-[A] Note 1; VDD=3.3VBlack Pattern, Rising time=470usVDD rpAllowable Logic/LCDDrive Ripple Voltage- -100 [mV] p-pVDD=3.3V at 60 HZ, all Black PatternNote 1: Measurement condition:VDD rising time0V3.3V5.1.2 Signal Electrical CharacteristicsInput signals shall be low or Hi-Z state when VDD is off.Note: LVDS Signal Waveform.Symbol ItemMin. Typ.Max. Unit RemarkVTH Differential Input High Threshold - - 100 [mV] VCM=1.2V VTL Differential Input Low Threshold 100 - - [mV] VCM=1.2V ｜VID ｜Input Differential Voltage100 400 600 [mV] VICMDifferential Input Common Mode Voltage1.1251.251.375[V]VTH/VTL=+-100mV5.2 Backlight Unit5.2.1 Parameter guideline for LED backlightFollowing characteristics are measured under a stable condition using a inverter at 25℃. (Room Temperature): Symbol Parameter Min.Typ.Max.Unit RemarkVCC Input Voltage 10.8 12 12.6 [Volt]I VCC Input Current - 0.32 - [A] 100% PWM DutyP VCC Power Consumption - 2.88 - [Watt] 100% PWM DutyF PWM Dimming Frequency 200 - 20K [Hz]Swing Voltage 3 3.3 5.5 [Volt]Dimming duty cycle 5 - 100 %I F LED Forward Current-50 -[mA] Ta = 25o C- 27.2 - [Volt]I F = 50mA, Ta = -30o C V F LED Forward Voltage- 26.4 28.8 [Volt]I F = 50mA, Ta = 25o C- 25.6 - [Volt]I F = 50mA, Ta = 85o C P LED LED Power Consumption- 2.72 - [Watt]Operation Life 50,000 - - Hrs I F=50mA, Ta= 25o CNote 1: Ta means ambient temperature of TFT-LCD module.Note 2: VCC, I VCC, I rush LED, P VCC are defined for LED backlight.(100% duty of PWM dimming)Note 3: I F, V F are defined for one channel LED. There are two LED channel in back light unit.Note 4: If G104STN01.0 module is driven by high current or at high ambient temperature & humidity condition. The operating life will be reduced.Note 5: Operating life means brightness goes down to 50% initial brightness. Minimum operating life time is estimated data.6. Signal Characteristics6.1 Pixel Format ImageFollowing figure shows the relationship between input signal and LCD pixel format.1st2nd799th800th1stLine600thLin6.2 Scanning DirectionThe following figures show the image seen from the front view. The arrow indicates the direction of scan.Fig. 1 Normal scan (Pin4, DPS = Low or NC) Fig. 2 Reverse scan (Pin4, DPS = High)6.3 TFT-LCD Interface Signal DescriptionThe module using a LVDS receiver embaded in AUO’s ASIC. LVDS is a differential signal technology for LCD interface and a high-speed data transfer device.Input Signal Interface Pin No. SymbolDescription 1 VDD Power Supply, 3.3V (typical) 2 VDD Power Supply, 3.3V (typical) 3 GND Ground4 DPS Reverse Scan Function [H: Enable; L/NC: Disable]5 RxIN0-6 RxIN0+ LVDS receiver signal channel 0LVDS Differential Data Input (R0, R1, R2, R3, R4, R5, G0)7 GND Ground8 RxIN1- 9 RxIN1+ LVDS receiver signal channel 1LVDS Differential Data Input (G1, G2, G3, G4, G5, B0, B1) 10 GND Ground11 RxIN2- 12 RxIN2+ LVDS receiver signal channel 2LVDS Differential Data Input (B2, B3, B4, B5, DE)13 GNDGround14 RxCLKIN- 15 RxCLKIN+ LVDS receiver signal clock 16 GND Ground17 RxIN3- 18 RxIN3+ LVDS receiver signal channel 3, pin17=3.3V&pin 18=GND for 6bit LVDS InputLVDS Differential Data Input (R6, R7, G6, G7, B6, B7, RSV)19 RSVReserved for AUO internal test. Please treat it as NC.20SEL68 6/8bits LVDS data input selection [H: 8bits L/NC: 6bit]Note 1: Input Signals shall be in low status when VDD is off.Note 2: High stands for “3.3V”, Low stands for “0V”, NC stands for “No Connection”. Note 3: RSV stands for “Reserved”.6.4 The Input Data Format6.4.1 SEL68SEL68 =“Low” or “NC” for 6 bits LVDS InputSEL68 = “High” for 8 bits LVDS InputNote1: Please follow PSWG.Note2: R/G/B data 7:MSB, R/G/B data 0:LSBSignal Name DescriptionRemarkR7R6R5R4R3R2R1R0Red Data 7 Red Data 6 Red Data 5 Red Data 4 Red Data 3 Red Data 2 Red Data 1 Red Data 0 Red-pixel DataFor 8Bits LVDS input MSB: R7 ; LSB: R0For 6Bits LVDS input MSB: R5 ; LSB: R0G7G6G5G4 G3G2G1 G0Green Data 7 Green Data 6 Green Data 5 Green Data 4Green Data 3 Green Data 2 Green Data 1Green Data 0 Green-pixel DataFor 8Bits LVDS input MSB: G7 ; LSB: G0For 6Bits LVDS input MSB: G5 ; LSB: G0B7 B6 B5 B4 B3 B2 B1 B0 Blue Data 7 Blue Data 6 Blue Data 5 Blue Data 4 Blue Data 3 Blue Data 2 Blue Data 1 Blue Data 0 Blue-pixel DataFor 8Bits LVDS input MSB: B7 ; LSB: B0For 6Bits LVDS input MSB: B5 ; LSB: B0 RxCLKIN LVDS Data ClockDE Data Enable SignalWhen the signal is high, the pixel data shall be valid to be displayed.Note: Output signals from any system shall be low or Hi-Z state when VDD is off.NS-like format6.5 TFT-LCD Interface Timing6.5.1 Timing CharacteristicsSignal Symbol Min. Typ. Max. Unit Clock Frequency 1/ T Clock 30 40 50 MHzPeriod T V 608 628 1024 Active T VD -- 600-- Vertical SectionBlankingT VB 8 28 424 T Line Period T H 960 1056 1060Active T HD -- 800 -- Horizontal SectionBlankingT HB 160 256 260 T ClockFrame RateF 506075Hz Note : DE mode.6.5.2 Input Timing DiagramDOTCLKDEHT HBDET VDInput Timing Definition ( DE Mode)Input Data Invaild Data Invaild Data6.6 Power ON/OFF SequenceVDD power and lamp on/off sequence is as below. Interface signals are also shown in the chart. Signals from any system shall be Hi-Z state or low level when VDD is off.Power ON/OFF sequence timingValue UnitsParameterMin. Typ. Max.T10.5 - 10 [ms]T2 30 40 50 [ms]T3 200 -- -- [ms]T4 0.5 -- 10 [ms]T5 10 - - [ms]T6 10 - - [ms]T7 0 - - [ms]T8 10 - - [ms]T9 -- -- 10 [ms]T10 110 -- -- [ms]T11 0 16 50 [ms]T12 - - 10 [ms]T13 1000 - - [ms]The above on/off sequence should be applied to avoid abnormal function in the display. Please make sure to turn off the power when you plug the cable into the input connector or pull the cable out of the connector.7. Connector & Pin AssignmentPhysical interface is described as for the connector on module. These connectors are capable of accommodating the following signals and will be following components.7.1 TFT-LCD Signal (CN1): LVDS ConnectorConnector Name / Designation Signal ConnectorManufacturer STM or compatibleConnector Model Number MSB24013P20HA or compatibleAdaptable Plug P24013P20 or compatiblePin No. Symbol Pin No. Symbol1 VDD2 VDD3 GND4 DPS5 RxIN0-6 RxIN0+7 GND 8 RxIN1-9 RxIN1+ 10 GND11 RxIN2- 12 RxIN2+13 GND 14 RxCKIN-15 RxCKIN+ 16 GND17 RxIN3- 18 RxIN3+19 RSV 20 SEL687.2 LED Backlight Unit (CN2): Driver ConnectorConnector Name / Designation Lamp ConnectorManufacturer ENTERY or compatibleConnector Model Number 3808K-F05N-12R or compatibleMating Model Number H208K–P05N-02B or compatiblePin No. symbol descriptionPin1 VCC 12V inputPin2 GND GNDPin3 On/OFF 5V-ON,0V-OFFPin4 Dimming PWMPin5 NA7.3 LED Backlight Unit (CN4): Light bar ConnectorConnector Name / Designation Lamp ConnectorManufacturer ENTERY or compatibleConnector Model Number H208K–P03N-02B or compatibleMating Model Number(CN3) 3808K-F03N-12R or compatiblePin No. symbol description ColorPin1 H LED anode RedPin2 L LED cathode WhitePin3 L LED cathode Black8. Reliability Test CriteriaItems Required Condition Note Temperature Humidity Bias 40℃, 90%RH, 300 hoursHigh Temperature Operation 80℃, 300 hoursLow Temperature Operation -20℃, 300 hoursHot Storage 80,℃ 300 hoursCold Storage -20,℃ 300 hoursThermal Shock Test -20/℃ 30 min, 60/℃ 30 min, 100cycles, 40℃minimun ramp rateHot Start Test 80℃/ 1Hr min. power on/off per 5 minutes, 5 timesCold Start Test -20℃/ 1Hr min. power on/off per 5 minutes, 5 timesShock Test (Non-Operating) 50G, 20ms, Half-sine wave, ( ±X, ±Y, ±Z)Vibration Test (Non-Operating) 1.5G, (10~200Hz, Sine wave)30 mins/axis, 3 direction (X, Y, Z)On/off test On/10 sec, Off/10 sec, 30,000 cyclesESD Contact Discharge: ± 8KV, 150pF(330Ω ) 1sec, 8 points, 25 times/ pointAir Discharge: ± 15KV, 150pF(330Ω ) 1sec, 8 points, 25 times/ pointNote 1EMI 30-230 MHz, limit 40 dBu V/m, 230-1000 MHz, limit 47 dBu V/mNote1: According to EN61000-4-2, ESD class B: Some performance degradation allowed. No data lost Self-recoverable. No hardware failures.Note2:Water condensation is not allowed for each test items.Each test is done by new TFT-LCD module. Don’t use the same TFT-LCD module repeatedly for reliability test. The reliability test is performed only to examine the TFT-LCD module capability.To inspect TFT-LCD module after reliability test, please store it at room temperature and room humidity for 24 hours at least in advance.G104STN01.09. Mechanical Characteristics工业液晶屏：ｗｗｗ．ｈｚｘｕｈｏｎｇ．ｃｏｍ杭州旭虹科技有限公司G104STN01.09.2 LCM Outline Dimension (Rear View)工业液晶屏：ｗｗｗ．ｈｚｘｕｈｏｎｇ．ｃｏｍ杭州旭虹科技有限公司G104STN01.010. Label and Packaging10.1 Shipping Label (on the rear side of TFT-LCD display)10.2 Carton PackageNote:Max capacity ：20 TFT-LCD module per cartonMax weight: 11.5 kg per cartonOutside dimension of carton: 477mm(L)* 290mm(W)*360mm(H)Pallet size ： 1180 mm * 980 mm * 135mmBox stackedModule by air ：(2 *4) *4 layers ，one pallet put 32 boxes ，total 640pcs module Module by sea ：(2 *4) *4 layers + (2 *4) *1 layers , two pallet put 40 boxes ，total 800pcs module Module by sea_HQ ：(2 *4) *4 layers+(2 *4) *2 layers, two pallet put 48 boxes, total 960pcs module工业液晶屏：ｗｗｗ．ｈｚｘｕｈｏｎｇ．ｃｏｍ杭州旭虹科技有限公司杭州旭虹科技有限公司11 Safety11.1 Sharp Edge RequirementsThere will be no sharp edges or comers on the display assembly that could cause injury.11.2 Materials11.2.1 ToxicityThere will be no carcinogenic materials used anywhere in the display module. If toxic materials are used, they will be reviewed and approved by the responsible AUO toxicologist.11.2.2 FlammabilityAll components including electrical components that do not meet the flammability grade UL94-V1 in the module will complete the flammability rating exception approval process.The printed circuit board will be made from material rated 94-V1 or better. The actual UL flammability rating will be printed on the printed circuit board.11.3 CapacitorsIf any polarized capacitors are used in the display assembly, provisions will be made to keep them from being inserted backwards.11.4 National Test Lab RequirementThe display module will satisfy all requirements for compliance to:UL 1950, First EditionU.S.A. Information Technology Equipment杭州旭虹科技有限公司。

一：京瓷10.4寸高亮屏TCG104XGLPAPNN-AN40基本信息品牌：京瓷（KYOCERA）液晶屏：型号TCG104XGLPAPNN-AN40液晶屏别名：TCG104XGLPAPNN-AN40工作温度：-30 ~ 80°C存储温度：-30 ~ 80°C当前生产状态：量产中二：京瓷10.4寸高亮屏TCG104XGLPAPNN-AN40结构特征液晶屏尺寸：10.4英寸点分辨率：1024（RGB)*768(XGA)像素排列：RGB垂直条状宽高比：4:3（宽:高）点间距：0.0685×0.2055mm（横*竖）像素间距：0.2055×0.2055mm（横*竖）面板重量：480g (Typ.)表面处理：雾面显示区域：210.4*157.8mm（横*竖）可视区域：215.4*161.8mm（横*竖）外观尺寸：230*180.2mm（横*竖）外观尺寸：10.5±0.5 mm (厚度)三：京瓷10.4寸高亮屏TCG104XGLPAPNN-AN40光学特征显示模式：AWV，常黑显示，透射式液晶屏亮度：1300cd/m2对比度：700:1 (Typ.) (透射)显示颜色：262K/16.7M (6-bit / 6-bit + Dithering)显示色域：51% NTSC (CIE1931)响应时间：18/12 (Typ.)(Tr/Td)(ms)可视角度：85/85/85/85 (Typ.)(CR≥10) (左/右/上/下)白色色度：X:0.315; Y:0.340四、京瓷10.4寸高亮屏TCG104XGLPAPNN-AN40光系统灯管位置：侧入式光源光源类型：WLED光源寿命：70K(Typ.)（小时）接口类型：端子背光电路：含LED驱动器五、京瓷10.4寸高亮屏TCG104XGLPAPNN-AN40信号接口信号大类：LVDS信号小类：LVDS (1 ch, 6/8-bit)液晶屏电压：3.3V(Typ.)液晶屏电流：270/350mA (Typ./Max.)接口类型：端子接口脚距：1.25 mm接口数量：1pcs接口脚数：20pins●补充说明：以上京瓷10.4寸高亮屏TCG104XGLPAPNN-AN40资料仅供参考，如有某项不准确，可以联系我们客服提供产品TCG104XGLPAPNN-AN40的规格资料，产品均以pdf规格为准。

客户最常问的问题及分析：一．新代控制器主要使用在哪些领域？答：铣床，车床，磨床，加工中心，车铣复合，pcb 木工机，各类专机二．目前新代的主要客户群有那些？1.在数控机床方面:主要应用在数控车床,数控铣床,数控雕铣机.数控磨床,加工中心等等….主要的代表厂商:车铣复合机: 台湾恰群台湾升岱嘉兴亿缙黄河精机台湾王主铣床: 上海旭品台湾金佑记厦门金普等雕铣机: 浙江飞鹤余姚永银上海洛克啄木鸟苏州宝玛数控南通松野南京诚友天津天工泉州四方广东精一广东台丰等等数控磨床: 台湾福裕上海伟扬精机等加工中心: 台湾亚力士广东义力广东鑫泰苏州宝玛数控等等2.在产业机械方面:主要应用在数控PCB磨刀机,数控木工机,数控弹簧成型机,数控深孔钻床,放电加工机.等等…主要代表厂商:数控PCB磨刀机: 昆山浩威电子上海正诚精密数控木工机: 台湾恩德上海仲德实业青岛力能机械等等…数控深孔钻: 上海金钻机械上海京美机械电子有限公司3.其他还有各类产业机械：贴标机、弹簧机、封切机、制袋机、各类刀具研磨机等总之新代的控制器在数控领域的应用非常广泛,可以满足不同客户的需求.三．年销售量如何？我们新代公司自己2004年开始在大陆销售控制器,2004年的销售量是1500套, 2005年销售量是2100套,2006年是4000套,2007年上半年已经达到3500套.可见我们的增长率每年都保持在100%,就整个工具机市场看，每年的总体增长在20％左右，新代在快度成长，市场份额逐渐增大。

以上的数字可以说明与宝元、发格相比，新代保持的领先的增长优势！逐步站稳市场四．售后服务如何?你们的服务网点有多少,都分布在哪里？1.新代产品从新代出厂起保固30个月，针对终端客户提供12个月保固2.机械厂内新代定期主动服务和及时教学终端客户服务，大陆地区新代承诺接到客户电话24小时内出发，99%的故障一次处理完毕；过保的客服一个问题收费300元，车费住宿费根据实际结算！3.新代大陆的总公司在苏州，在大陆其他地区共有18家分公司和经销商，提供就近服务，大大提高服务的实效性．随着新代控制器销售量的增加,我们把技术服务这个环节看的更加重要,目前我们已经在大陆地区设置：苏州,南京,杭州,宁波,东莞,广州,厦门,天津,济南,武汉,成都,芜湖,上海,青岛,汕头,深圳等服务网点,完全满足客户的技术需求．在台湾有新竹,台中,台南等网点．另外我们在泰国，越南，马来西亚，美国等都有服务网点．4.机床厂可以随时派人员到我们技术中心受训,我们也会定时到机床厂对技术人员做专业技术培训.宝元大陆服务网点：广东、上海、南京、宁波4处五．你的控制器价格跟同行相比如何？我们跟FANUC的价格基本在6:10之间.跟台湾宝元相比,其500系列价格较新代低，520I系列和新代相当首先看外观：宝元500采用8.4寸单色显示器，新代10.4寸工业规格液晶显示器．再看宝元500 和宝元520 他的单节处理能力弱，导致加工转角、断单节速度慢有停顿，看新代WIN CE的多工架构，保证了短单节处理能力和转交加工速度，机器走起来很顺．接下来看西班牙发格,发格的价位要比我们高好多,同样的加工条件下，从加工精度、加工光洁度、和加工速度综合考虑，新代具有更高的性价比．六．你们系统跟其它厂家相比优势在哪？我们是以最高性价比的控制器提供最友好的人机操作，最大开放性的系统软体和参数，并确保最快时效的售后保障，是机床行业最值得信赖的电控伙伴．七．你们的产品根宝元相比如何？他们的好还是你们的好，听说他们的销量挺大的A、新代和宝元都是PC-BASE控制器，宝元是一个成长很快的公司，不管是产品销量还是产品质量和知名度新代优与宝元！宝元03年才开始产品推向市场，而我们95年产品就已经推向市场，宝元是宝成集团里一个控制部门，而我们是专业的数控系统公司．B、根据使用者反映：两款系统在加工表现上差异不大；但是在使用者操作和系统画面以及外观上、还有系统的稳定性方面有差异，新代有庞大的服务团队，及时有效的服务新代同样优与宝元，这些都是客户认可的。

有关数控车床电气控制系统的改造与设计摘要：通常而言，数控车床电气系统可实现5-10年的无故障运行，而后便进入到了故障的高发时期，为了确保其仍然保持较高的可靠性及稳定性，必须对其进行升级改造，以便确保其能够继续发挥作用，进一步为企业创造经济效益。

因此，本文以gs30型数控车床电气控制系统为例，对车床参数进行了改造及设计，并进行了实验验收。

关键词：数控车床电气控制系统改造设计随着我国数控车床的不断发展，其如今已经成为我国制造业中相当重要的基础装备之一。

数控车床主要包括机械系统以及电气系统两大部分。

通常来说，对于电气系统而言，其无故障运行期在5-10年之间，随后便会进入到故障的高发时期，但是，一般数控车床其机械部件若保养良好一般能够使用20-25年，且精度、可靠及稳定性能仍可以保持较高水平。

如今，不少数控车床已经运行了十多年，并步入了“损耗期”，这些陈旧的数控机床常常故障频发，很多功能已经无法很好地适应如今大规模的生产需求，有必要针对数控车床相关设备进行改造，以便提高企业设备的技术水平，通过少量投资对老数控车床的电气系统进行进一步的升级和改造，以便使其重焕生机并继续发挥其作用。

1、数控车床电气控制系统1.1 数控车床的工作原理及其功能分析对于数控车床而言，以被加工零件的工作图以及工艺过程卡为依据，通过对数控代码及其程序格式进行加工程序编写的整个过程进行规定，在数控系统中进行准确加工程序的输入，并将已给定加工程序及输入信号进行相应的运算、控制及其处理，而后将处理结果发送至控制系统中，从而对机床各部件进行驱动，使其能够以机械加工相关要求为依据进行有序的运行，并自动进行合格零件的制作。

由于数控车床主要负责进行轴类以及盘类回转体零部件的加工，并自动完成圆柱面、圆锥面、断面、圆弧面以及螺纹内外工序的切削及其加工过程，因而在机械制造领域得到了广泛的应用，经改造后的数控车床也应当能够满足这些功能。

1.2 数控车床电气控制系统电路分析1）主轴电动机的电气控制，主轴电机为交流变频电动机，主要通过变频器进行驱动，对于其正、反转以及速度等主要是由数控系统控制的。

显示界面说明注：该版仅用于测试，最终版本和此有区别，请以实际为准！此版本显示器说明书适用于ICP6600触摸屏显示器，应用车型如下：XCT100,QAY180,QAY220,QAY260，QY130K,QAY160,QAY200,QY90K.目录目录1、开机界面 (2)2、工况确认界面 (2)3、主界面(起重机监视界面) (3)4、界面切换菜单 (5)5、工况设置界面 (6)6 专家诊断 (13)7 虚拟墙设置界面 (17)8 控制交互设置 (18)9故障查询界面 (22)10 维护保养界面 (23)11 调试界面 (25)12 系统设置界面 (29)13 记录查询 (29)14 GPS锁车 (30)1、开机界面iFLEX5 系统的控制器和显示器通电后，系统有一个初始化过程，初始化主要是对起重机关的参数进行配置。

显示器在通电后初始化会显示徐重起重机动画效果，最后出现欢迎界面（Logo界面）,如下：2、工况确认界面初始化完成后，系统进入工况确认界面。

系统会读取上一次设置的工况并在下面的界面中显示出来，供操作者确认：界面中显示的信息所代表含义如下：1 工况类型2 固定副臂长度3 固定副臂角度4 后配重重量5 支腿跨距6 工况代码7 倍率8 伸臂组合号9 臂长10 伸臂组合百分比11 工况示意图12 按钮栏进入该界面后首先确认设置工况和倍率是否和实际工况倍率一致，如果一致则按按钮进入主界面；如果不一致，请按按钮进行工况设置，设置完成后方可操作起重机进行作业。

3、主界面(起重机监视界面)主界面显示起重机作业时的工况信息和状态信息。

3.1起重机监视界面左侧监视界面显示起重机当前作业信息：最大吊重量、实际吊重量、风速、臂长、幅度、角度、高度等信息。

右侧界面显示缸销、臂销状态、每节臂的实际伸臂百分比和目标伸臂百分比信息。

下方按钮表示含义：从左向右依次为：1：菜单按钮：按下此按钮弹出界面切换菜单2：禁鸣按钮：发生蜂鸣器报警5秒后按下此按钮可以使蜂鸣器禁鸣 3：帮助按钮：按下此按钮弹出帮助信息 4：工况设置按钮：按下按钮进入工况设置页面 5：伸缩组合设置按钮：按下按钮进入伸缩组合选择页面 6：应急按钮：按下按钮可进行紧急收车。