STPS60L30CW;中文规格书,Datasheet资料

cw1062规格书
CW1062是一种规格书，它可能指代某个产品、设备或系统的技
术规格和要求。

由于你没有具体说明CW1062是指哪个领域的规格书，我将从多个可能的角度来回答你的问题。

1. 产品规格书，CW1062产品规格书可能包含有关产品的详细
描述、功能特性、性能指标、外观尺寸、材料要求、电气参数、工
作环境要求等信息。

它通常是供制造商、供应商和客户之间进行技
术沟通和交流的重要文档。

2. 设备规格书，如果CW1062是某种设备的规格书，它可能包
含有关设备的设计要求、工作原理、操作说明、安全要求、维护保
养要求等信息。

设备规格书通常由制造商提供给用户，以确保设备
的正确使用和维护。

3. 系统规格书，CW1062系统规格书可能涵盖某个系统的整体
设计要求、功能模块、数据流程、接口要求、性能指标、安全性要
求等。

系统规格书通常用于软件开发、网络架构、信息系统等领域，以确保系统能够满足用户需求。

需要注意的是，CW1062规格书的具体内容和格式可能因不同领域而异。

因此，如果你有具体的CW1062规格书需求，建议你提供更详细的背景信息，以便我能够给出更准确的回答。

May 2011Doc ID 018819 Rev 11/7STPS60SM200CPower Schottky rectifierFeatures■High reverse voltage (200 V)■Low forward voltage drop ■High frequency operationDescriptionThe STPS60SM200C is a dual Schottky rectifier suited for high frequency switched-mode power supply.Housed in TO-247, this device is especially suited for use in telecom base station SMPS, providing these applications with a good efficiency at both low and high load.Table 1.Device summarySymbol Value I F(AV) 2 x 30 A V RRM 200 V T j (max)175 °C V F (typ)640 mVCharacteristics STPS60SM200C2/7Doc ID 018819 Rev 11 CharacteristicsWhen the two diodes 1 and 2 are used simultaneously:ΔT j (diode 1) = P(diode 1) x R th(j-c)(Per diode) + P(diode 2) x R th(c)To evaluate the conduction losses use the following equation: P = 0.58 x I F(AV) + 0.0037 x I F 2(RMS)Table 3.Thermal resistanceSymbol ParameterValue UnitR th(j-c)Junction to case Per diode 0.7°C/W Total0.5R th(c)Coupling0.3Table 4.Static electrical characteristics (per diode)Symbol ParameterTest conditions Min.Typ.Max.Unit I R (1)Reverse leakage currentT j = 25 °C V R = V RRM 0.05mAT j = 125 °C 613V F (2)Forward voltage dropT j = 25 °C I F = 7.5 A 0.670.70V T j = 125 °C 0.510.55T j = 25 °C I F = 15 A 0.730.77T j = 125 °C 0.570.61T j = 25 °C I F = 30 A0.790.83T j = 125 °C0.640.691.Pulse test: t p = 5 ms, δ < 2%2.Pulse test: t p = 380 µs, δ < 2%STPS60SM200CCharacteristicsDoc ID 018819 Rev 13/7Figure 1.Average forward power dissipation versus average forward current Figure 2.Average forward current versus ambient temperature (δ = 0.5)T= t /Tp t Figure 3.Non repetitive surge peak forward current versus overload duration Figure 4.Relative variation of thermalimpedance junction to case versus tFigure 5.Reverse leakage current versus reverse voltage applied Figure 6.Junction capacitance versus reverse voltage appliedCharacteristics STPS60SM200C4/7Doc ID 018819 Rev 1Figure 7.Forward voltage drop versus forward currentFigure 8.Forward voltage drop versus forward currentSTPS60SM200C Package informationDoc ID 018819 Rev 15/72 Package information●Epoxy meets UL94, V0●Cooling method: by conduction (C)●Recommended torque value: 0.55 to 1.0 N·mIn order to meet environmental requirements, ST offers these devices in different grades ofECOPACK ® packages, depending on their level of environmental compliance. ECOPACK ® specifications, grade definitions and product status are available at: . ECOPACK ® is an ST trademark.Ordering information STPS60SM200C6/7Doc ID 018819 Rev 13 Ordering information4 Revision historyTable 6.Ordering informationOrder code Marking Package Weight Base qty Delivery modeSTPS60SM200CWSTPS60SM200CWTO-2474.45 g30TubeTable 7.Document revision historyDate RevisionChanges17-May-20111First issue.STPS60SM200CPlease Read Carefully:Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.All ST products are sold pursuant to ST’s terms and conditions of sale.Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.ST and the ST logo are trademarks or registered trademarks of ST in various countries.Information in this document supersedes and replaces all information previously supplied.The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.© 2011 STMicroelectronics - All rights reservedSTMicroelectronics group of companiesAustralia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of AmericaDoc ID 018819 Rev 17/7分销商库存信息: STMSTPS60SM200CW。

1/8November 2003STS3DNE60LDUAL N-CHANNEL 60V -0.065Ω -3A SO-8STripFET™POWERMOSFETs TYPICAL R DS (on)=0.065Ωs LOW THRESHOLD GATE DRIVE sSTANDARD OUTLINE FOR EASYAUTOMATED SURFACE MOUNT ASSEMBLYDESCRIPTIONThis Power MOSFET is the latest development of STMicroelectronics unique "Single Feature Size™"strip-based process.The resulting transistor shows extremely high packing density for low on-resis-tance,rugged avalanche characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility.APPLICATIONSs DC MOTOR DRIVE s DC-DC CONVERTERSs BATTERY MANAGEMENT IN NOMADIC EQUIPMENTs POWER MANAGEMENT IN PORTABLE/DESKTOP PC SABSOLUTE MAXIMUM RATINGS( )Pulsewidth limited by safe operating areaTYPE V DSS R DS(on)I D STS3DNE60L60V<0.08Ω3ASymbol ParameterValue Unit V DS Drain-source Voltage (V GS =0)60V V DGR Drain-gate Voltage (R GS =20k Ω)60V V GS Gate-source Voltage±20V I DDrain Current (continuous)at T C =25°C Single OperationDrain Current (continuous)at T C =100°C Single Operation 31.9A A I DM ( )Drain Current (pulsed)12A P TOTTotal Dissipation at T C =25°C Dual Operation Total Dissipation at T C =25°C Single Operation1.62.0W W l s Ob so e t ePr od u c t () -l t l c )Ob so e t ePr od u c (s )- O bs o e t eP r od u t (sSTS3DNE60L2/8THERMAL DATA(*)Mounted on FR-4Board (t ≤ 10 sec)ELECTRICAL CHARACTERISTICS (TCASE =25°C UNLESS OTHERWISE SPECIFIED)OFFON (1)DYNAMICRthj-amb(*)Thermal Resistance Junction-amb Max Single Operation (*)Thermal Resistance Junction-amb Max Dual Operation 62.578°C/W °C/W T j Max.Operating Junction Temperature 150°C T stgStorage Temperature–55to 150°CSymbol ParameterTest ConditionsMin.Typ.Max.Unit V (BR)DSS Drain-sourceBreakdown Voltage I D =250µA,V GS =060V I DSS Zero Gate VoltageDrain Current (V GS =0)V DS =Max Rating1µA V DS =Max Rating,T C =125°C 10µA I GSSGate-body Leakage Current (V DS =0)V GS =±20V±100nASymbol ParameterTest ConditionsMin.Typ.Max.Unit V GS(th)Gate Threshold Voltage V DS =V GS ,I D =250µA 1V R DS(on)Static Drain-source On ResistanceV GS =10V,I D =1.5A V GS =4.5V,I D =1.5A0.0650.080.080.1ΩΩSymbol ParameterTest ConditionsMin.Typ.Max.Unit g fs (1)Forward Transconductance V DS =15V ,I D =1.5A5S C iss Input Capacitance V DS =25V,f =1MHz,V GS =0815pF C oss Output Capacitance 125pF C rssReverse Transfer Capacitance40pFs l u )O() -O bs o e t eP r od c t(s3/8STS3DNE60LELECTRICAL CHARACTERISTICS (CONTINUED)SWITCHING ONSWITCHING OFFSOURCE DRAIN DIODENote: 1.Pulsed:Pulse duration =300µs,duty cycle 1.5%.2.Pulse width limited by safe operating area.Symbol ParameterTest ConditionsMin.Typ.Max.Unit t d(on)t r Turn-on Delay Time Rise TimeV DD =30V,I D =3A R G =4.7ΩV GS =5V (see test circuit,Figure 3)2030ns ns Q g Q gs Q gdTotal Gate Charge Gate-Source Charge Gate-Drain ChargeV DD =24V,I D =3A,V GS =4.5V13.563.5nC nC nCSymbol ParameterTest ConditionsMin.Typ.Max.Unit t r(off)t f t cOff-voltage Rise Time Fall TimeCross-over TimeV DD =48V,I D =3A R G =4.7Ω,V GS =5V (see test circuit,Figure 5)121632ns ns nsSymbol ParameterTest ConditionsMin.Typ.Max.Unit I SD Source-drain Current 3A I SDM (1)Source-drain Current (pulsed)12A V SD (2)Forward On Voltage I SD =3A,V GS =0 1.2V t rr Q rr I RRMReverse Recovery Time Reverse Recovery Charge Reverse Recovery CurrentI SD =3A,di/dt =100A/µs,V DD =30V,T j =150°C (see test circuit,Figure 5)601304ns nC AO-O STS3DNE60L4/8.Tranconductancellc Ob so e t eP-O bs o e t eP r od u t (5/8STS3DNE60LSource-drain Diode Forward Characteristics)osSTS3DNE60L6/8Fig.5:Test Circuit For Inductive Load Switching And Diode Recovery TimesFig.4:Gate Charge test CircuitFig.2:Unclamped Inductive WaveformFig.1:Unclamped Inductive Load Test CircuitFig.3:Switching Times Test Circuit For Resistive LoadSTS3DNE60L7/8l slc)O b s oe t eP ro du ct()-O bs oe t eP ro dut(sSTS3DNE60L8/8Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.© The ST logo is a registered trademark of STMicroelectronics© 2003 STMicroelectronics - Printed in Italy - All Rights ReservedSTMicroelectronics GROUP OF COMPANIESAustralia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States.© 分销商库存信息: STMSTS3DNE60L。

Vishay SemiconductorsVLMF31..High Intensity SMD LEDFEATURES•SMD LED with exceptional brightness •Luminous intensity categorized•Compatible with automatic placement equipment•EIA and ICE standard package•Compatible with IR Reflow, vapor phase and wave solder processes acc. to CECC 00802 and J-STD-020C•Available in 8 mm tape •Low profile package•Non-diffused lens: excellent for coupling to light pipes and backlighting •Low power consumption •Luminous intensity ratio in one packaging unit I Vmax /I Vmin ≤ 1.6•Lead (Pb)-free device-RoHS compliant •Preconditioning: acc. to JEDEC Level 2a •ESD-withstand voltage:up to 2 kV according to JESD22-A114-B19225DESCRIPTIONThis device has been designed to meet the increasing demand for AlInGaP technology.The package of the VLMF31.. is the PLCC-2.It consists of a lead frame which is embedded in a white thermoplast. The reflector inside this package is filled up with clear epoxy.APPLICATIONS •Automotive: Backlighting in dashboards and switches•Telecommunication: Indicator and backlighting in telephone and fax•Indicator and backlight for audio and video equip-ment•Indicator and backlight in office equipment •Flat backlight for LCDs, switches and symbols •General usePARTS TABLEPARTCOLOR, LUMINOUS INTENSITY ANGLE OF HALF INTENSITY (± ϕ)TECHNOLOGY VLMF31Q2T1-GS08Soft Orange, I V = (90 to 355) mcd 60°AllnGaP on GaAs VLMF31Q2T1-GS18Soft Orange, I V = (90 to 355) mcd 60°AllnGaP on GaAs VLMF31R1S2-GS08Soft Orange, I V = (112 to 280) mcd 60°AllnGaP on GaAs VLMF31R1S2-GS18Soft Orange, I V = (112 to 280) mcd 60°AllnGaP on GaAs VLMF31S1T1-GS08Soft Orange, I V = (180 to 355) mcd 60°AllnGaP on GaAs VLMF31S1T1-GS18Soft Orange, I V = (180 to 355) mcd60°AllnGaP on GaAsVishay Semiconductors VLMF31..Note:1) Tamb = 25°C unless otherwise specified2) Driving the LED in reverse direction is suitable for a short term application Note:1) Tamb = 25°C unless otherwise specified2) in one Packing Unit IVmax/I Vmin≤ 1.6Note:Luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of ± 11 %.The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each reel (there will be no mixing of two groups on each reel).In order to ensure availability, single brightness groups will not be or-derable.In a similar manner for colors where wavelength groups are mea-sured and binned, single wavelength groups will be shipped on any one reel. In order to ensure availability, single wavelength groups will not be orderable.Note:Wavelengths are tested at a current pulse duration of 25 ms and an accuracy of ± 1 nm.ABSOLUTE MAXIMUM RATINGS1), VLMF31..PARAMETER TEST CONDITION SYMBOL VALUE UNIT Reverse voltage2)V R5V DC Forward current T amb≤ 85°C I F30mA Surge forward current t p≤ 10 µs I FSM0.1A Power dissipation P V80mW Junction temperature T j125°C Operating temperature range T amb- 40 to + 100°C Storage temperature range T stg- 40 to + 100°CThermal resistance junction/ ambient mounted on PC board(pad size > 16 mm2)R thJA400K/WOPTICAL AND ELECTRICAL CHARACTERISTICS1), VLMF31.., SOFT ORANGEPARAMETER TEST CONDITION PART SYMBOL MIN TYP.MAX UNIT Luminous intensity2)I F = 20 mA VLMF31Q2T1I V90355mcdVLMF31R1S2I V112280mcdVLMF31S1T1I V180355mcd Dominant wavelength I F = 20 mAλd598605611nm Peak wavelength I F = 20 mAλp610nm Angle of half intensity I F = 20 mAϕ± 60deg Forward voltage I F = 20 mA V F 2.0 2.6V Reverse voltage I R = 10 µA V R5V Junction capacitance V R = 0, f = 1 MHz C j15pFLUMINOUS INTENSITY CLASSIFICATIONGROUP LIGHT INTENSITY [MCD]STANDARD OPTIONAL MIN MAXP 14556 25671Q 17190 290112R 1112140 2140180S 1180224 2224280T 12803552355450CROSSING TABLEVISHAY OSRAMVLMF31Q2T1LOT676-Q2T1VLMF31R1S2LOT676-R1S2VLMF31S1T1LOT676-S1T1COLOR CLASSIFICATIONGROUP SOFT ORANGEDOM. WAVELENGTH (NM)MIN. MAX.159860126006033602605460460756066096608611Vishay SemiconductorsVLMF31..TYPICAL CHARACTERISTICST amb = 25°C unless otherwise specifiedFigure 1. Forward Current vs. Ambient TemperatureFigure 3. Rel. Luminous Intensity vs. Angular Displacement 05101520253035400102030405060708090100T am b - Am b ient Temperat u re (°C)16615I - F o r w a r d C u r r e n t (m A )F0.40.200.20.40.695 103190.60.90.80°30°10°20°40°50°60°70°80°0.71.0I v r e l -R e l a t i v e L u m i n o u s I n t e n s i t yFigure 4. Relative Intensity vs. WavelengthFigure 5. Forward Current vs. Forward VoltageFigure6. Relative Luminous Intensity vs. Forward Current1101001.01.52.0 2.53.0V F -For w ard V oltage (V )95 10878F I -F o r w a r d C u r r e n t (m A )Vishay SemiconductorsVLMF31..PACKAGE DIMENSIONS IN MMFigure7. Rel. Luminous Intensity vs. Ambient Temperature Figure8. Forward Voltage vs. Ambient TemperatureVishay SemiconductorsVLMF31..METHOD OF TAPING/POLARITY AND TAPE AND REEL SMD LED (VLM3 - SERIES)Vishay’s LEDs in SMD packages are available in an antistatic 8 mm blister tape (in accordance with DIN IEC 40 (CO) 564) for automatic component inser-tion. The blister tape is a plastic strip with impressed component cavities, covered by a top tape.TAPING OF VLM.3..REEL PACKAGE DIMENSION IN MM FOR SMD LEDS, TAPE OPTION GS08(= 1500 PCS.)REEL PACKAGE DIMENSION IN MM FOR SMD LEDS, TAPE OPTION GS18(= 8000 PCS.) PREFEREDFigure9. Tape dimensions in mm for PLCC-2Figure 10. Reel dimensions - GS08Figure 11. Reel dimensions - GS18Vishay SemiconductorsVLMF31..SOLDERING PROFILEBARCODE-PRODUCT-LABEL EXAMPLE:A)Type of component B)Manufacturing PlantC)SEL - Selection Code (Bin):e.g.: Q2 = Code for Luminous Intensity Group 1 = Code for Color Group D)Date Code year/weekE)Day Code (e.g. 3: Wednesday)F)Batch No.G)Total quantity H)Company CodeFigure 12. Vishay Leadfree Reflow Soldering Profile(acc. to J-STD-020C)Figure 13. Double wave soldering of opto devices (all packages)V ISHAYAHBC D E F GVishay SemiconductorsVLMF31..DRY PACKINGThe reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transpor-tation and storage.FINAL PACKINGThe sealed reel is packed into a cardboard box. A sec-ondary cardboard box is used for shipping purposes.RECOMMENDED METHOD OF STORAGEDry box storage is recommended as soon as the alu-minium bag has been opened to prevent moisture absorption. The following conditions should be observed, if dry boxes are not available:• Storage temperature 10°C to 30°C • Storage humidity ≤ 60 % RH max.After more than 672 hours under these conditions moisture content will be too high for reflow soldering.In case of moisture absorption, the devices will recover to the former condition by drying under the following condition:192 hours at 40°C + 5°C/ - 0°C and < 5 % RH (dry air/nitrogen) or96 hours at 60°C + 5°C and < 5 % RH for all device containers or24 hours at 100°C + 5°C not suitable for reel or tubes.An EIA JEDEC Standard JESD22-A112 Level 2a label is included on all dry bags.Example of JESD22-A112 Level 2a labelESD PRECAUTIONProper storage and handling procedures should be fol-lowed to prevent ESD damage to the devices espe-cially when they are removed from the Antistatic Shielding Bag. Electro-Static Sensitive Devices warn-ing labels are on the packaging.VISHAY SEMICONDUCTORS STANDARD BAR-CODE LABELSThe Vishay Semiconductors standard bar-code labels are printed at final packing areas. The labels are on each packing unit and contain Vishay Semiconductors specific data.VLMF31..Vishay SemiconductorsOZONE DEPLETING SUBSTANCES POLICY STATEMENTIt is the policy of Vishay Semiconductor GmbH to1.Meet all present and future national and international statutory requirements.2.Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment.It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs).The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances.Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents.1.Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively2.Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the EnvironmentalProtection Agency (EPA) in the USA3.Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor G mbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances.We reserve the right to make changes to improve technical designand may do so without further notice.Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or deathassociated with such unintended or unauthorized use.Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, GermanyLegal Disclaimer NoticeVishayNoticeSpecifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale.。

October 2006 Rev 11/7STPS30100STPower Schottky rectifierMain product characteristicsFeatures and Benefits■Avalanche rated ■Low V F■Good trade off between leakage current and forward voltage drop ■High frequency operation ■Avalanche capability specifiedDescriptionSingle Schottky rectifier, suited for high frequency switch mode power supply.Packaged in TO-220AB, this device is intended to be used in notebook and game station adaptors, providing in these applications a good efficiency at both low and high load.I F(AV)30 A V RRM 100 V T j (max)150° C V F (typ)0.385 VTable 1.Absolute Ratings (limiting values)Symbol ParameterValue Unit V RRM Repetitive peak reverse voltage 100V I F(RMS)RMS forward current60A I F(AV)Average forward current δ = 0.5T c = 125° C 30A I FSM Surge non repetitive forward current t p = 10 ms sinusoidal 300A P ARM Repetitive peak avalanche power t p = 1 µs T j = 25° C26400W T stg Storage temperature range-65 to + 175°C T jMaximum operating junction temperature (1)1. condition to avoid thermal runaway for a diode on its own heatsink150°CdPtot dTj---------------1Rth j a –()-------------------------<Characteristics STPS30100ST2/71 CharacteristicsTo evaluate the conduction losses use the following equation:P = 0.475 x I F(AV) + 0.006 x I F 2(RMS)Table 2.Thermal resistanceSymbol ParameterValue Unit R th(j-c)Junction to case1°C/WTable 3.Static electrical characteristics (per diode)SymbolParameterTest Conditions Min.Typ.Max.Unit I R (1)1.Pulse test: t p = 5 ms, δ < 2%Reverse leakage currentT j = 25° CV R = V RRM175µA T j = 125° C 2050mA T j = 25° C V R = 70 V 60µA T j = 125° C 1020mAV F (2)2.Pulse test: t p = 380 µs, δ < 2%Forward voltage dropT j = 25° C I F = 5 A0.475VT j = 125° C 0.385T j = 25° C I F = 10 A0.555T j = 125° C 0.475T j = 25° C I F = 15 A 0.6200.660T j = 125° C 0.5250.565T j = 25° C I F = 30 A0.7400.800T j = 125° C0.6050.655STPS30100STCharacteristics3/7Figure 1.Conduction losses versus average Figure 2.Average forward current versusTδ=t /Tp tTδ=t p /Tt Figure 3.Normalized avalanche power derating versus pulse durationFigure 4.Normalized avalanche power derating versus junction Figure 5.Non repetitive surge peak forward current versus overload duration Figure 6.Relative variation of thermalimpedance junction to case versusCharacteristicsSTPS30100ST4/7Figure 7.Reverse leakage current versusreverse voltage applied (typicalFigure 8.Junction capacitance versus reverse voltage applied (typical Figure 9.Forward voltage drop versusFigure 10.Forward voltage drop versusSTPS30100ST Package Information5/72 Package InformationEpoxy meets UL94,V0In order to meet environmental requirements, ST offers these devices in ECOP ACK®packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOP ACK is an ST trademark. ECOP ACK specifications are available at: .Ordering Information STPS30100ST6/73 Ordering Information4 Revision HistoryOrdering type Marking Package Weight Base qtyDelivery modeSTPS30100STSTPS30100STTO-220AB2.23 g50TubeDate RevisionChanges24-Oct-20061First issueSTPS30100STPlease Read Carefully:Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.All ST products are sold pursuant to ST’s terms and conditions of sale.Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.ST and the ST logo are trademarks or registered trademarks of ST in various countries.Information in this document supersedes and replaces all information previously supplied.The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.© 2006 STMicroelectronics - All rights reservedSTMicroelectronics group of companiesAustralia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America7/7分销商库存信息: STMSTPS30100ST。

STTH6003TV/CWOctober 1999 - Ed: 5CHIGH FREQUENCY SECONDARY RECTIFIER®Dual rectifiers suited for Switch Mode Power Supply and high frequency DC to DC converters.Packaged either in ISOTOP or in TO-247, this device is intended for use in low voltage, high frequency inverters, free wheeling operation,welding equipments and telecom power supplies.DESCRIPTIONCOMBINES HIGHEST RECOVERY AND VOLTAGE PERFORMANCEULTRA-FAST, SOFT AND NOISE-FREE RECOVERYINSULATED PACKAGE: ISOTOP Insulation voltage: 2500 V RMS Capacitance: < 45 pFLOW INDUCTANCE AND LOW CAPACI-TANCE ALLOW SIMPLIFIED LAYOUT FEATURES AND BENEFITSSymbol ParameterValue Unit V RRM Repetitive peak reverse voltage 300V I F(RMS)RMS forward current ISOTOP 100A I F(RMS)RMS forward current TO-24760A I F(AV)Average forward current ISOTOPTc = 95°C δ = 0.5Per diode Per device 3060A TO-247Tc =135°C δ = 0.5Per diode Per device 3060A I FSM Surge non repetitive forward current.ISOTOP tp = 10 ms sinusoidal 400A TO-247tp = 10 ms sinusoidal 300A I RSMNon repetitive peak reverse current tp =100 µs square4A T stg Storage temperature rangeISOTOP - 55 to + 150°C TO-247- 65 to + 175°C TjMaximum operating junction temperatureISOTOP 150°C TO-247175°CABSOLUTE RATINGS (limiting values, per diode)I F(AV) 2 x 30 A V RRM 300 V V F (max) 1 V trr (max)55 nsMAJOR PRODUCT CHARACTERISTICSA1K1K2A2A1A2K1K2ISOTOP ™STTH6003TV ISOTOP is a registered trademark of STMicroelectronicsA1K A2A1A2KTO-247STTH6003CW1/6Symbol Parameter Tests conditionsMin.Typ.Max.Unit I R *Reverse leakage currentV R = 300 VTj = 25°C 60µATj = 125°C60600V F **Forward voltage dropI F = 30 ATj = 25°C 1.25V Tj = 125°C0.851Pulse test : * tp = 5 ms, δ < 2 % ** tp = 380 µs, δ < 2%To evaluate the maximum conduction losses use the following equation:P = 0.75 x I F(AV) + 0.008 x I F 2(RMS)STATIC ELECTRICAL CHARACTERISTICS (per diode)Symbol ParameterValue Unit R th (j-c)Junction to caseISOTOP Per diodeTotal 1.40.75°C/WTO-247Per diode Total 10.55R th (c)Coupling0.1When the diodes 1 and 2 are used simultaneously:∆Tj (diode 1) = P (diode 1) x R th(j-c) (per diode) + P (diode 2) x R th(C)THERMAL RESISTANCES Symbol Tests conditionsMin.Typ.Max.Unit trrI F = 0.5 A Irr = 0.25 A I R = 1A Tj = 25°C40nsI F= 1 A dI F /dt = - 50 A/µs V R = 30 V 55tfr I F = 30 A dI F /dt = 200 A/µs Tj = 25°C 350ns V FP V FR = 1.1 x V F max.5V S factor Vcc = 200 V I F = 30 A Tj = 125°C0.3-I RMdI F /dt = 200 A/µs11A RECOVERY CHARACTERISTICS STTH6003TV/CW2/65101520253035400510152025303540IF(av) (A)P1(W)Tδ=tp/Ttpδ= 1δ= 0.5δ= 0.2δ= 0.1δ= 0.05Fig. 1: Conduction losses versus average current (per diode).0.20.40.60.81.01.21.41.61.82.02.22.42.6110100VFM(V)IFM(A)Tj=125°C T ypical valuesTj=25°C Maximum valuesTj=125°C Maximum valuesFig. 2: Forward voltage drop versus forward current (maximum values , per diode).05010015020025030035040045050020406080100120140160180trr(ns)VR=200V Tj=125°CIF=2*IF(av)IF=IF(av)IF=0.5*IF(av)dIF/dt(A/µs)Fig. 5: Reverse recovery time versus dI F /dt (90%confidence, per diode).50100150200250300350400450500246810121416182022dIF/dt(A/µs)IRM(A)VR=200V Tj=125°CIF=2*IF(av)IF=IF(av)IF=0.5*IF(av)Fig. 4: Peak reverse recovery current versus dI F /dt (90% confidence, per diode).1E-31E-21E-11E+01E+10.00.20.40.60.81.0tp(s)Zth(j-c)/Rth(j-c)Tδ=tp/TtpSingle pulse δ= 0.5δ= 0.2δ= 0.1Fig. 3a: Relative variation of thermal impedance junction to case versus pulse duration (ISOTOP).1E-41E-31E-21E-11E+00.00.20.40.60.81.0Zth(j-c)/Rth(j-c)Tδ=tp/Ttptp(s)Single pulseδ= 0.5δ= 0.2δ= 0.1Fig. 3b: Relative variation of thermal impedance junction to case versus pulse duration (TO-247).STTH6003TV/CW3/62550751001250.00.20.40.60.81.01.21.41.61.82.02.22.4Tj(°C)IRMS factorFig. 7: Relative variation of dynamic parameters versus junction temperature (reference: Tj = 125°C).50100150200250300350400450500246810VFP(V)IF=IF(av)Tj=125°CdIF/dt(A/µs)Fig. 8: Transient peak forward voltage versus dI F /dt (90% confidence, per diode).050100150200250300350400450500100200300400500tfr(ns)IF=IF(av)VFR=1.1*VFmaxTj=125°CdIF/dt(A/µs)Fig. 9: Forward recovery time versus dI F /dt (90%confidence, per diode).0501001502002503003504004505000.00.10.20.30.40.50.6S factor VR=200V Tj=125°CdIF/dt(A/µs)Fig. 6: Softness factor (tb/ta) versus dI F /dt (typical values, per diode).STTH6003TV/CW4/6PACKAGE MECHANICAL DATA ISOTOPREF.DIMENSIONS Millimeters Inches Min.Max.Min.Max.A11.8012.200.4650.480 A18.909.100.3500.358 B7.88.200.3070.323 C0.750.850.0300.033 C2 1.95 2.050.0770.081 D37.8038.20 1.488 1.504 D131.5031.70 1.240 1.248 E25.1525.500.990 1.004 E123.8524.150.9390.951 E224.80 typ.0.976 typ.G14.9015.100.5870.594 G112.6012.800.4960.504 G2 3.50 4.300.1380.169 F 4.10 4.300.1610.169 F1 4.60 5.000.1810.197 P 4.00 4.300.1570.69P1 4.00 4.400.1570.173 S30.1030.30 1.185 1.193STTH6003TV/CW5/6Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied.STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written ap-proval of STMicroelectronics.The ST logo is a registered trademark of STMicroelectronics © 1999 STMicroelectronics - Printed in Italy - All rights reserved.STMicroelectronics GROUP OF COMPANIESAustralia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - MalaysiaMalta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A.PACKAGE MECHANICAL DATA TO-247F2F1V2L4L2L1L3DLL5MEHVVADia.F3F4G = =F(x3)REF.DIMENSIONSMillimeters Inches Min.Typ.Max.Min.Typ.Max.A 4.85 5.150.1910.203D 2.20 2.600.0860.102E 0.400.800.0150.031F 1.00 1.400.0390.055F1 3.000.118F2 2.000.078F3 2.00 2.400.0780.094F4 3.00 3.400.1180.133G 10.900.429H 15.4515.750.6080.620L 19.8520.150.7810.793L1 3.70 4.300.1450.169L218.500.728L314.2014.800.5590.582L434.60 1.362L5 5.500.216M 2.00 3.000.0780.118V 5°5°V260°60°Dia. 3.55 3.650.1390.143Ordering code Marking Package Weight Base qty Delivery modeSTTH6006TV1STTH6006TV ISOTOP 27gwithout screws10with screwsTubeSTTH6006CW STTH6006CW TO-247 4.36g30TubeCooling method: by conduction (C)Recommended torque value (ISOTOP): 1.3 N.m.Recommended torque value (TO-247°: 0.8 N.m.Maximum torque value (ISOTOP): 1.5 N.m.Maximum torque value (TO-247): 1.0 N.m.Epoxy meets UL 94,V0STTH6003TV/CW6/6分销商库存信息: STMSTTH6003CW。

样 品 确 认 书SAMPLE REPORT FOR APPROVAL客户名称CUSTOMER 产品名称开关电源PRODUCT NAME 型 号WMAH250T120MODEL DETAIL 规 格SPECIFICATION 料 号PART NO 供 应 商深圳市西磁科技有限公司备注：请贵公司将样品确认结果签字盖章后回传。

目 录一、产品概述----------------------------------------------------------------------------------------2深圳市西磁科技有限公司地址：深圳市南山区丽山路民企科技园3栋5搂TEL ：6 FAX ：6二、产品主要---------------------------------------------------------------------------------------- 2三、引用标准及规范----------------------------------------------------------------------------- 2四、环境条件---------------------------------------------------------------------------------------- 2五、电气特性---------------------------------------------------------------------------------------- 3六、保护特性--------------------------------------------------------------------------------------- 3七、安规要求---------------------------------------------------------------------------------------47-1 绝缘强度和绝缘阻抗------------------------------------------------------------------- 47-2 漏电流------------------------------------------------------------------------------------- 4八、产品安装、使用说明8-2 运输----------------------------------------------------------------------------------- 48-3 储存----------------------------------------------------------------------------------- 4九、包装、运输、储存十、外观尺寸10-1外形尺寸------------------------------------------------------------------------------ 510-3定位尺寸及外观图------------------------------------------------------------------- 510-3 端子定义----------------------------------------------------------------------------- 5一、产品概述1-1．低成本和高可靠性。

Document Number: 89178For technical questions within your region, please contact one of the following:Dual High-Voltage Trench MOS Barrier Schottky RectifierUltra Low V F = 0.58 V at I F = 8 AV30100PWVishay General SemiconductorFEATURES•Trench MOS Schottky technology•Low forward voltage drop, low power losses •High efficiency operation•Solder dip 275 °C max. 10 s, per JESD 22-B106•Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC•Halogen-free according to IEC 61249-2-21 definitionTYPICAL APPLICATIONSFor use in high frequency converters, switching power supplies, freewheeling diodes, OR-ing diode, dc-to-dc converters and reverse battery protection.MECHANICAL DATACase: TO-3PWMolding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free and RoHS compliant,commercial gradeTerminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102M3 suffix meets JESD 201 class 1A whisker test Polarity: As markedMounting Torque: 10 in-lbs maximumPRIMARY CHARACTERISTICSI F(AV) 2 x 15 A V RRM 100 V I FSM120 A E AS at L = 60 mH 150 mJ V F at I F = 15 A 0.68 V T J max.150 °CMAXIMUM RATINGS (T A = 25°C unless otherwise noted)PARAMETERSYMBOL V30100PWUNIT Maximum repetitive peak reverse voltage V RRM 100V Maximum average forward rectified current (fig. 1)per device I F(AV)30A per diode15Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diodeI FSM 120A Non-repetitive avalanche energy at T J = 25 °C, L = 60 mH per diode E AS 150mJ Peak repetitive reverse current at t p = 2 μs, 1 kHz,T J = 38 °C ± 2 °C per diode I RRM 1.0A Voltage rate of change (rated V R )dV/dt 10 000V/μs Operating junction and storage temperature rangeT J , T STG- 40 to + 150°C For technical questions within your region, please contact one of the following:Document Number: 89178V30100PWVishay General SemiconductorNotes(1)Pulse test: 300 μs pulse width, 1 % duty cycle (2)Pulse test: Pulse width ≤ 40 msRATINGS AND CHARACTERISTICS CURVES(T A = 25 °C unless otherwise noted)Fig. 1 - Forward Current Derating Curve Fig. 2 - Forward Power Loss Characteristics Per DiodeELECTRICAL CHARACTERISTICS (T A = 25°C unless otherwise noted)PARAMETER TEST CONDITIONS SYMBOL TYP.MAX.UNIT Breakdown voltageI R = 1.0 mA T J = 25 °C V BR100 (minimum)-VInstantaneous forward voltage per diodeI F = 8 AT J = 25 °CV F (1)0.64-V I F = 15 A 0.830.91I F = 8 A T J = 125 °C 0.58-I F = 15 A 0.680.76Reverse current per diodeV R = 70 VT J = 25 °C I R (2) 6.3-μA T J = 125 °C 4.4-mA V R = 100 VT J = 25 °C 22450μA T J = 125 °C1026mATHERMAL CHARACTERISTICS (T A = 25°C unless otherwise noted)PARAMETERSYMBOL V30100PWUNIT Typical thermal resistanceper diode R θJC2.0°C/Wper device1.4ORDERING INFORMATION (Example)PACKAGE PREFERRED P/N UNIT WEIGHT (g)PACKAGE CODEBASE QUANTITYDELIVERY MODETO-3PWV30100PW-M3/4W4.54W30/tubeTubeDocument Number: 89178For technical questions within your region, please contact one of the following:V30100PWVishay General SemiconductorFig. 3 - Typical Instantaneous Forward Characteristics Per Diode Fig. 4 - Typical Reverse Characteristics Per Diode Fig. 5 - Typical Junction Capacitance Per DiodeFig. 6 - Typical Transient Thermal Impedance Per DiodePACKAGE OUTLINE DIMENSIONS in inches (millimeters)Legal Disclaimer Notice VishayDisclaimerALL PRODU CT, PRODU CT SPECIFICATIONS AND DATA ARE SU BJECT TO CHANGE WITHOU T NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein.Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.Material Category PolicyVishay Intertechnology, Inc. hereb y certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant.Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.Revision: 12-Mar-121Document Number: 91000分销商库存信息:VISHAY-GENERAL-SEMICONDUCTOR V30100PW-M3/4W。

July 2011Doc ID 4926 Rev 61/8STPS40L15CLow drop OR-ing power Schottky diodeFeatures■Very low forward voltage drop for less power dissipation and reduced heatsink size ■Reverse voltage suited to OR-ing of 3 V , 5 V and 12 V rails■Avalanche capability specifiedDescriptionDual center tap schottky rectifier packaged in TO-220AB and TO-247, this device is especially intended for use as OR-ing diode in fault tolerant power supply equipments.Table 1.Device summarySymbolValue I F(AV) 2x20 A V RRM 15 VT j (max) 125 °CV F (max)0.33 VCharacteristics STPS40L15C2/8Doc ID 4926 Rev 61 CharacteristicsTo evaluate the conduction losses use the following equation :P = 0.18 x I F(AV) + 0.008 I F 2(RMS)Table 2.Absolute ratings (limiting values, per diode)Symbol Parameter Value Unit V RRMRepetitive peak reverse voltage15 V I F(RMS) Forward current rms 30AI F(AV) Average forward current T case = 140 °C δ = 1 Total 40APer diode 20 I FSM Surge non repetitive forwardcurrentt p = 10 m, Sinusoidal 310 A I RRM Peak repetitive reverse currentt p = 2 µs, F= 1 kHz 2 A I RSM Non repetitive peak reverse current t p = 100 µs 3 A P ARM Repetitive peak avalanche power t p = 1µs, T j = 25 °C13140 W T stg Storage temperature range-65 to + 150°C T j Maximum operating junction temperature (1)1. condition to avoid thermal runaway for a diode on its own heatsink 125 °C dV/dtCritical rate of rise of reverse voltage10000V/µsTable 3.Thermal resistancesSymbol Parameter Value Unit R th(j-c) Junction to case Per diode1.6°C/WTotal 0.85R th (c)Coupling 0.1 °C/WTable 4.Static electrical characteristics (Per diode)Symbol Parameter Tests conditions Min. Typ. Max. UnitI R (1)1.Pulse test : t p = 380 µs, δ < 2%Reverse leakage currentT j = 25 °C V R = V RRM 6mAT j = 100 °C 200500 V F (1) Forwardvoltage drop T j = 25 °CI F = 19 A 0.41 V T j = 25 °CI F = 40 A 0.52 T j = 125 °CI F = 19 A 0.280.33T j = 125 °CI F = 40 A0.42 0.50dPtotdTj ---------------1Rth j a –()-------------------------<STPS40L15CCharacteristicsDoc ID 4926 Rev 63/8Figure 1.Average forward power dissipation versus average forward currentFigure 2.Average forward current versus ambient temperatureFigure 3.Normalized avalanche power derating versus pulse durationFigure 4.Normalized avalanche power derating versus junctionFigure 5.Non repetitive surge peak forward current versus overload duration Figure 6.Relative variation of thermalimpedance junction to case versusCharacteristicsSTPS40L15C4/8Doc ID 4926 Rev 6Figure 7.Reverse leakage current versus reverse voltage applied (typicalFigure 8.Junction capacitance versus reverse voltage applied (typical Figure 9.Forward voltage drop versus forward current (typical values perFigure 10.Forward voltage drop versus forward current (typical maximumSTPS40L15C Package informationDoc ID 4926 Rev 65/82 Package information●Epoxy meets UL94,V0●Cooling method: by conduction (C)●Recommended torque values for: TO-220AB 0.4 to 0.6 N·m ●Recommended torque values for: TO-247 0.9 to 1.2 N·mIn order to meet environmental requirements, ST offers these devices in different grades ofECOPACK ® packages, depending on their level of environmental compliance. ECOPACK ® specifications, grade definitions and product status are available at: . ECOPACK ® is an ST trademark.Package information STPS40L15C6/8Doc ID 4926 Rev 6STPS40L15C Ordering informationDoc ID 4926 Rev 67/83 Ordering information4 Revision historyTable 7.Ordering informationOrder codeMarkingPackage Weight Base qtyDelivery modeSTPS40L15CW STPS40L15CWTO-2474.4 g 30 Tube STPS40L15CT STPS40L15CT TO-220AB2.2 g50TubeTable 8.Document revision historyDate Revision ChangesJuly-20035A Previous edition.18-Jul-20116Added cathode indicator K to illustration for TO-220AB.STPS40L15CPlease Read Carefully:Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.All ST products are sold pursuant to ST’s terms and conditions of sale.Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.ST and the ST logo are trademarks or registered trademarks of ST in various countries.Information in this document supersedes and replaces all information previously supplied.The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.© 2011 STMicroelectronics - All rights reservedSTMicroelectronics group of companiesAustralia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America8/8Doc ID 4926 Rev 6分销商库存信息:STMSTPS40L15CW STPS40L15CT。

FSBCW30CETRADEMARKSACEx™CoolFET™CROSSVOLT™E 2CMOS TM FACT™FACT Quiet Series™FAST ®FASTr™GTO™HiSeC™The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.LIFE SUPPORT POLICYFAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORTDEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROV AL OF FAIRCHILD SEMICONDUCTOR CORPORA TION.As used herein:ISOPLANAR™MICROWIRE™POP™PowerTrench™QS™Quiet Series™SuperSOT™-3SuperSOT™-6SuperSOT™-8TinyLogic™1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant intothe body, or (b) support or sustain life, or (c) whosefailure to perform when properly used in accordancewith instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.2. A critical component is any component of a lifesupport device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.PRODUCT STATUS DEFINITIONS Definition of TermsDatasheet Identification Product Status Definition Advance InformationPreliminary No Identification Needed Obsolete This datasheet contains the design specifications for product development. Specifications may change in any manner without notice.This datasheet contains preliminary data, andsupplementary data will be published at a later date.Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor.The datasheet is printed for reference information only.Formative or In DesignFirst ProductionFull ProductionNot In ProductionDISCLAIMERFAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY , FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.。

Document Number: 89054For technical questions within your region, please contact one of the following: Revision: 19-Apr-11DiodesAmericas@ , DiodesAsia@ , DiodesEurope@ 1This document is subject to change without notice.THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?91000Surface Mount Schottky Barrier RectifiersMSS2P2, MSS2P3Vishay General SemiconductorTYPICAL APPLICATIONSFor use in low voltage high frequency inverters,freewheeling, DC/DC converters, and polarity protection applications.FEATURES•Very low profile - typical height of 0.65 mm •Ideal for automated placement•Low forward voltage drop, low power losses •High efficiency•Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C •AEC-Q101 qualified•Compliant to RoH S Directive 2002/95/EC and in accordance to WEEE 2002/96/EC•Halogen-free according to IEC 61249-2-21 definitionMECHANICAL DATACase: MicroSMPMolding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoH S compliant, and commercial gradeBase P/NH M3 - halogen-free, RoH S compliant, and automotive gradeTerminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix meets JESD 201 class 2 whisker testPolarity: Color band denotes the cathode endNotes(1)Pulse test: 300 μs pulse width, 1 % duty cycle (2)Pulse test: Pulse width 40 msPRIMARY CHARACTERISTICSI F(AV) 2.0 A V RRM 20 V, 30 V I FSM30 AV F at IF = 2.0 A0.47 V T J max.150 °CMicroSMPeSMP® SeriesTop View Bottom ViewMAXIMUM RATINGS (T A = 25 °C unless otherwise noted)PARAMETER SYMBOLMSS2P2MSS2P3UNITDevice marking code2223Maximum repetitive peak reverse voltage V RRM 2030V Maximum average forward rectified current (fig. 1)I F(AV) 2.0A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated loadI FSM 30A Operating junction and storage temperature rangeT J , T STG - 55 to + 150°C ELECTRICAL CHARACTERISTICS (T A = 25 °C unless otherwise noted)PARAMETERTEST CONDITIONS SYMBOLTYP.MAX.UNITMaximum instantaneous forward voltageI F = 1.0 AT A = 25 °CV F (1)0.44-V I F = 2.0 A 0.520.60I F = 1.0 A T A = 125 °C 0.36-I F = 2.0 A0.470.55Maximum reverse current Rated V R T A = 25 °C I R (2)15250μA T A = 125 °C6.020mA Typical junction capacitance4.0 V, 1 MHzC J 65-pF / For technical questions within your region, please contact one of the following:Document Number: 890542DiodesAmericas@ , DiodesAsia@ , DiodesEurope@ Revision: 19-Apr-11This document is subject to change without notice.THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?91000MSS2P2, MSS2P3Vishay General SemiconductorNote(1)Thermal resistance from junction to ambient and junction to lead mounted on PCB with 6.0 mm x 6.0 mm copper pad areas R θJL is measured at the terminal of cathode band. R θJC is measured at the top center of the bodyNote(1)Automotive gradeRATINGS AND CHARACTERISTICS CURVES(T A = 25 °C unless otherwise noted)Fig. 1 - Maximum Forward Current Derating Curve Fig. 2 - Forward Power Loss CharacteristicsFig. 3 - Typical Instantaneous Forward CharacteristicsFig. 4 - Typical Reverse CharacteristicsTHERMAL CHARACTERISTICS (T A = 25 °C unless otherwise noted)PARAMETER S YMBOL M S S 2P2M S S 2P3UNITTypical thermal resistanceR θJA (1)105°C/WR θJL (1)15R θJC (1)20ORDERING INFORMATION (Example)PREFERRED P/N UNIT WEIGHT (g)PREFERRED PACKAGE CODEBASE QUANTITYDELIVERY MODEMSS2P3-M3/89A 0.00689A 45007" diameter plastic tape and reel MSS2P3HM3/89A (1)0.00689A45007" diameter plastic tape and reel/Document Number: 89054For technical questions within your region, please contact one of the following: Revision: 19-Apr-11DiodesAmericas@ , DiodesAsia@ , DiodesEurope@ 3This document is subject to change without notice.THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?91000MSS2P2, MSS2P3Vishay General SemiconductorFig. 5 - Typical Junction Capacitance Fig. 6 - Typical Transient Thermal ImpedancePACKAGE OUTLINE DIMENSIONSin inches (millimeters)/Legal Disclaimer Notice VishayDisclaimerALL PRODU CT, PRODU CT SPECIFICATIONS AND DATA ARE SU BJECT TO CHANGE WITHOU T NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product.Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein.Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death.Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.Material Category PolicyVishay Intertechnology, Inc. hereb y certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant.Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.Revision: 12-Mar-121Document Number: 91000 /分销商库存信息:VISHAY-GENERAL-SEMICONDUCTOR MSS2P3-M3/89A MSS2P2-M3/89A。

CW-3000 INDUSTRIAL CHILLER USER MANUAL<1> INTRODUCTIONCW-3000 Series is professional cooling machine referring to international advanced thermolysis cooling system design, suitable for small water-cooled cooling devices requested machinery.1. Specific disconnection alarm security protection.2. Hermetic type water tank, water is available for a long time used.3. Real-time temperature monitoring, accurate knowledge of heating devicesworking condition.4. Professional air-cooled forced radiator with strong heat dissipatingcapacity and difficult to be blocked up.5. Equipped with alarm output port to protect sensitive components quickly.6. High cost performance, low failure rate.7. There are several options of power supply, complete in specifications.<2> CAUTION1. It is strictly forbidden to plug and run the cooler without feeding water.2. Cooler should be placed in a well-ventilated, dry environment place andaway from heat sources. Please keep at least 30cm from obstructions to the air outlet which is in the back of the cooler, and should leave at least 10cm between obstructions and air inlets of two sides.3. The cooling water must be drained if the cooler is out of use for long time orbefore being transported.4. To protect laser tubes , the radiator fan of cooler will suspend to work whenwater temperature is lower ( about 10℃) , and it will restart to run when water temperature rises to higher ( about 20 ℃).<3> Details1．Shape and parts name FRONTBACKPOWER SW TEMPERATURE DISPLAYSYSTEM ALARM INDICATOR RUNNING INDICATOR INJECTION PORTALARM SIGNAL OUTPUT TERMINALPOWER SOCKET (WITH FUSE) OUTLET INLETOUTFALLRADIATOR FAN2. The first installationIt is very simple to install this industrial cooling machine. The first time installation of the new machine can be carried out by following steps.1. Open the package to check if the machine is intact and all the necessaryaccessories are completed.2. Open the injection port, then add cooling water.3. According to system conditions, connect the water inlet and outlet pipewell.4. Plug in power, turn on the power switch. (Do not allow the water overflow)5. Check the water level of the water tank again. (It should be 80-150cm fromthe surface of water to the injection port)3. Alarm descriptionCauses of the cooling water circulation loop alarm and the working condition table.Note: The flow alarm port connects to the normally open relay and normally closed relay contacts, requiring operating current to be less than 5A, working voltage less than 300V.4. Maintenance1. To ensure good heat dissipating, please open the lid to clean the dirt after thecooler used in long-term.2. Working in cold north area, it is better to use noncorrosive antifreeze fluid.<4> SPECIFICATIONSModel CW-3000AG CW-3000DG CW-3000AF CW-3000DF CW-3000AK CW-3000DK Voltages AC220~240V AC100~120V AC220~240V AC100~120V AC220~240V AC100~120V Frequency 50/60HzCurrent 0.45A 0.9A 0.45A 0.9A 0.5A 1.0A Cooling 50W/ °C 60W/ °Ccapacity 9 LInlet and outlet holdOutside dimensions10mm brass connectorInside dimensions8mm speedy connectorInside dimensions6mm speedy connectorMax. pumpinglift10 M 70 MN.W 9.5Kg 12KgG.W 12Kg 14.5Kg Dimensions 47X27X37cm(LxWxH)Packingdimensions59X39X48cm(LxWxH)<5> SIMPIE TROUBLESHOOTINGFailure Fault cause ApproachPower cord is not plugged in place Plug the power cord in placeMachine turned onbut unelectrifiedfuse burnt-out Replace the fuse inside the power interface which is in the back of machineFlow alarm (panel red light) with water pipe directlyconnect to the outlet, inlet, there is no water flow Water level inwater tank istoo lowFeed water and check thepipe leakageWhen used with the device,flow alarm (panel red light), but a direct connection with the pipe outlet and inlet, there is water flowing butnot alarmingBlockage incirculating waterpipelineCheck circulatingwater pipelineChiller of poorventilationTo improve the ventilationUltra-high temperatureExcessive heat load Reduce the heat load or to use other modelsA normal boot, but thefan does not work The water temperaturebelow 20 degreesA normal phenomenon,no processing Water drop inelectric circuitNatural drying ordrying off capSwitch on with alarmingafter adding water or changing water Damaged pumpsdry transferTo replace or repair waterpumps,prohibitedanhydrous bootSlow outfall drainage The injection portis not openOpen the injection port<6> PACKING LIST1. Machine 1pc,user manual 1pc.2. Power cord 1pc, connection hose 1pc,sealed hoop 2pcs.3. Spare fuse for 250V/2A 1pc. (Held in the spare fuseholder of power socket.)4. An alarm signal output plug.CAUTION:The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction,children being supervised not to play with the appliance!CW-3000工业循环冷却机 使用安装说明书一、 功能特点简介CW-3000系列是参照国际先进散热型冷却系统设计制造的专业冷却机，适用于小型水冷散热设备。

®1/6Table 1: Main Product CharacteristicsI F(AV) 2 x 30 A V RRM 170 V T j 175 °C V F (max)0.76 VSTPS60170CHIGH VOLTAGE POWER SCHOTTKY RECTIFIERREV. 1September 2005FEATURES AND BENEFITS■High junction temperature capability ■Low leakage current■Good trade off between leakage current and forward voltage drop ■Low thermal resistance ■High frequency operation ■Avalanche specificationDESCRIPTIONDual center tab Schottky rectifier suited for High Frequency Switched Mode Power Supplies.Packaged in TO-220AB, this device is intended for use to enhance the reliability of the application.Table 2: Order CodePart Number Marking STPS60170CTSTPS60170CTTable 3: Absolute Ratings (limiting values, per diode)Symbol ParameterValue Unit V RRM Repetitive peak reverse voltage 170V I F(RMS)RMS forward current 60A I F(AV)Average forward currentT c = 150 °C δ = 0.5Per diode Per device3060A I FSM Surge non repetitive forward current t p = 10 ms sinusoidal 270A P ARM Repetitive peak avalanche power t p = 1 µs T j = 25 °C17300W T stg Storage temperature range-65 to + 175°C T j Maximum operating junction temperature *175°C dV/dtCritical rate of rise of reverse voltage10000V/µs* : thermal runaway condition for a diode on its own heatsink dPtot dTj---------------1Rth j a –()-------------------------<STPS60170C2/6Table 4: Thermal Parameters Table 5: Static Electrical Characteristics (per diode)Pulse test:* tp = 5 ms, δ < 2%** tp = 380 µs, δ < 2%To evaluate the conduction losses use the following equation: P = 0.60 x I F(AV) + 0.053 I F 2(RMS)Symbol ParameterValue Unit R th(j-c)Junction to casePer diode Total 1.00.7°C/WR th(c)Coupling0.4When the diodes 1 and 2 are used simultaneously:∆ Tj(diode 1) = P(diode 1) x R th(j-c)(Per diode) + P(diode 2) x R th(c)Symbol ParameterTests conditions Min.Typ Max.Unit I R *Reverse leakage currentT j = 25 °C V R = V RRM35µA T j = 125 °C 835mAV F **Forward voltage dropT j = 25 °CI F = 30 A0.94VT j = 125 °C 0.720.76T j = 25 °C I F = 60 A0.97 1.05T j = 125 °C0.860.92STPS60170C3/6Figure 1: Average forward power dissipation versus average forward current (per diode)Figure 2: Average forward current versus ambient temperature (δ = 0.5, per diode)Figure 3: Normalized avalanche power derating versus pulse durationFigure 4: Normalized avalanche power derating versus junction temperatureFigure 5: Non repetitive surge peak forward current versus overload duration (maximum values, per diode)Figure 6: Relative variation of thermal impedance junction to case versus pulse durationTd =t /Tt pTd =t /Tt ptTd =t /Tt pSTPS60170C4/6Figure 7: Reverse leakage current versus reverse voltage applied (typical values, per diode)Figure 8: Junction capacitance versus reverse voltage applied (typical values, per diode)Figure 9: Forward voltage drop versus forward current (per diode, low level)Figure 10: Forward voltage drop versus forward current (per diode, high level)STPS60170C5/6Figure 11: TO-220AB Package Mechanical DataIn order to meet environmental requirements, ST offers these devices in ECOPACK® packages. Thesepackages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: .Table 6: Ordering Information■Epoxy meets UL94, V0■Cooling method: by conduction (C)■Recommended torque value: 0.55 Nm.■Maximum torque value: 0.7 Nm.Ordering type Marking Package Weight Base qtyDelivery mode STPS60170CTSTPS60170CTTO-220AB2.20 g50TubeTable 7: Revision HistoryDate RevisionDescription of Changes16-Sep-20051First issue.STPS60170CInformation furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.The ST logo is a registered trademark of STMicroelectronics.All other names are the property of their respective owners© 2005 STMicroelectronics - All rights reservedSTMicroelectronics group of companiesAustralia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America6/6分销商库存信息: STMSTPS60170CT。

August 2006 Rev 11/7STPS1L30MFLow drop power Schottky rectifier in flat packageMain product characteristicsFeatures and benefits■Very low profile package: 0.85 mm■Backward compatible with standard STmite footprint■Very small conduction losses ■Negligible switching losses ■Extremely fast switching■Low forward voltage drop for higher efficiency and extended battery life ■Low thermal resistance ■Avalanche capability specifiedOrder CodeDescriptionSingle Schottky rectifier suited for switch mode power supplies and high frequency DC to DC converters.Packaged in STmite flat, this device is intended for use in very low voltage, high frequency inverters, free wheeling and polarity protection applications. Due to the very small size of the package this device fits battery poweredequipment (cellular, notebook, PDA’s, printers) as well as chargers and PCMCIA cards.I F(AV) 1 A V RRM30 V T j (max)150° C V F (max)0.39 VPart number Marking STPS1L30MFF1L3Table 1.Absolute ratings (limiting values)Symbol ParameterValue Unit V RRM Repetitive peak reverse voltage 30V I F(RMS)RMS forward voltage 2A I F(AV)Average forward currentT c = 140° C δ = 0.51A I FSM Surge non repetitive forward current t p = 10 ms sinusoidal 50A P ARM Repetitive peak avalanche power t p = 1 µs T j = 25° C1200W T stg Storage temperature range-65 to + 150°C T j Maximum operating junction temperature (1)150°C dV/dtCritical rate of rise of reverse voltage (rated V R , T j = 25° C)10000V/µs1. condition to avoid thermal runaway for a diode on its own heatsinkdPtotdTj---------------1Rth j a –()-------------------------<Characteristics STPS1L30MF2/71 CharacteristicsTo evaluate the conduction losses use the following equation: P = 0.26 x I F(AV) + 0.08 I F 2(RMS)Table 2.Thermal resistanceSymbol ParameterValue Unit R th(j-c)Junction to case 20°C/W R th(j-a)(1)1.Mounted with minimum recommended pad size, PC board FR4Junction to ambient250°C/WTable 3.Static electrical characteristicsSymbolParameterTests conditions Min.Typ Max.UnitI R (1)1.Pulse test: = 380 µs, δ < 2%Reverse leakage currentT j = 25° C V R = V RRM 0.130.39mA T j = 85° C5.2516.5T j = 25° C V R = 20 V0.050.24T j = 85° C 3.510.5T j = 25° C V R = 10 V 0.030.15T j = 85° C 2.47V F (1)Forward voltage dropT j = 25° C I F = 1 A 0.330.39V T j = 85° C 0.280.34T j = 25° C I F = 2 A0.390.45T j = 85° C 0.360.42T j = 25° C I F = 3 A 0.450.53T j = 85° C 0.430.51T j = 25° C I F = 4 A0.500.60T j = 85° C0.500.60STPS1L30MFCharacteristics3/7Figure 1.Conduction losses versus averageFigure 2.Average forward current versusFigure 3.Normalized avalanche power derating versus pulse durationFigure 4.Normalized avalanche power derating versus junctionFigure 5.Non repetitive surge peak forward current versus overload duration Figure 6.Relative variation of thermalimpedance junction to case versusCharacteristicsSTPS1L30MF4/7Figure 7.Reverse leakage currrent versus reverse voltage applied (typicalFigure 8.Reverse leakage currrent versus junction temperature (typical Figure 9.Junction capacitance versus reverse voltage applied (typicalFigure 10.Forward voltage drop versusforward currentFigure 11.Thermal resistance junction toambient versus copper surface under tab (epoxy printed boardSTPS1L30MF Package information5/72 Package informationTable 4.STmite flat dimensionsFigure 12.STmite flat recommended footprint (all dimensions in mm)In order to meet environmental requirements, ST offers these devices in ECOP ACK®packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOP ACK is an ST trademark. ECOP ACK specifications are available at: .Ref.DimensionsMillimeters Inches Min.Typ.Max.Min.Typ.Max.A 0.800.850.950.0310.0330.037b0.400.550.650.0160.0220.026b20.700.85 1.000.0270.0330.039c 0.100.150.250.0040.0060.009D 1.75 1.90 2.050.0690.0750.081E3.60 3.80 3.900.1420.1500.154E1 2.80 2.95 3.100.1100.1160.122L 0.500.550.800.0200.0220.031L1 2.10 2.40 2.600.0830.0940.102L20.450.600.750.0180.0240.030L30.200.350.500.0080.0140.020E1EcD bL3ALL1L2b20.850.632.004.130.95 1.950.650.65Ordering information STPS1L30MF6/73 Ordering information4 Revision historyPart number Marking Package Weight Base qty Delivery mode STPS1L30MFF1L3STmite flat16 mg12000Tape and reelDate RevisionChanges21-Aug-20061First issue.STPS1L30MFPlease Read Carefully:Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice.All ST products are sold pursuant to ST’s terms and conditions of sale.Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.ST and the ST logo are trademarks or registered trademarks of ST in various countries.Information in this document supersedes and replaces all information previously supplied.The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.© 2006 STMicroelectronics - All rights reservedSTMicroelectronics group of companiesAustralia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America7/7分销商库存信息: STMSTPS1L30MF。

Document Number: 94196For technical questions, contact: diodes-tech@Schottky Rectifier, 2 x 15 A30L30CTSPbF/30L30CT-1PbFVishay High Power ProductsFEATURES•150 °C T J operation •Center tap configuration •Very low forward voltage drop •High frequency operation•High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance •Guard ring for enhanced ruggedness and long term reliability •Lead (Pb)-free (“PbF” suffix)•Designed and qualified for Q101 levelDESCRIPTIONThis center tap Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150 °C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes,and reverse battery protection.PRODUCT SUMMARYI F(AV) 2 x 15 A V R30 VBase common cathode2MAJOR RATINGS AND CHARACTERISTICSSYMBOL CHARACTERISTICS VAL U ESU NITS I F(AV)Rectangular waveform30A V RRM 30V V F 15 Apk, T J = 125 °C (per leg)0.37T JRange- 55 to 150°CVOLTAGE RATINGSPARAMETER SYMBOL 30L30CTSPbF 30L30CT-1PbFUNITS Maximum DC reverse voltageV R 30VMaximum working peak reverse voltageV RWMABSOLUTE MAXIMUM RATINGSPARAMETER SYMBOL TEST CONDITIONSVAL U ES UNITSMaximum average forward currentper deviceI F(AV)50 % duty cycle at T C = 140 °C, rectangular waveform 30A per leg15Maximum peak one cycle non-repetitive surge currentI FSM 5 µs sine or 3 µs rect. pulseFollowing any rated loadcondition and with rated V RRM applied145010 ms sine or 6 ms rect. pulse220Non-repetitive avalanche energy per leg E AS T J = 25 °C, I AS = 2 A, L = 7.5 mH15mJ Repetitive avalanche current per legI ARCurrent decaying linearly to zero in 1 µsFrequency limited by T J maximum V A = 1.5 x V R typical2A * Pb containing terminations are not RoHS compliant, exemptions may apply元器件交易网For technical questions, contact: diodes-tech@Document Number: 9419630L30CTSPbF/30L30CT-1PbFVishay High Power ProductsSchottky Rectifier, 2 x 15 ANote(1)Pulse width < 300 µs, duty cycle < 2 %ELECTRICAL SPECIFICATIONSPARAMETER SYMBOLTEST CONDITIONSVAL U ES UNITS Maximum forward voltage drop per legV FM (1)15 AT J = 25 °C 0.46V30 A 0.5715 A T J = 125 °C 0.3730 A0.50Maximum reverse leakage current per leg I RM (1)T J = 25 °C V R = Rated V R1.50mA T J = 125 °C350Maximum junction capacitance per leg C T V R = 5 V DC (test signal range 100 kHz to 1 MHz) 25 °C 1500pF Typical series inductance per leg L S Measured lead to lead 5 mm from package body 8.0nH Maximum voltage rate of change dV/dtRated V R10 000V/µs THERMAL - MECHANICAL SPECIFICATIONSPARAMETER SYMBOL TEST CONDITIONSVAL U ES UNITS Maximum junction andstorage temperature range T J , T Stg- 55 to 150°CMaximum thermal resistance, junction to case per leg R thJC DCoperation 1.5°C/W Maximum thermal resistance, junction to case per package 0.8Approximate weight 2g 0.07oz.Mounting torque minimum 6 (5)kgf · cm(lbf · in)maximum12 (10)Marking deviceCase style D 2PAK 30L30CTS Case style TO-26230L30CT-1元器件交易网Document Number: 94196For technical questions, contact: diodes-tech@30L30CTSPbF/30L30CT-1PbFSchottky Rectifier, 2 x 15 A Vishay High Power ProductsFig. 1 - Maximum Forward Voltage Drop CharacteristicsFig. 2 - Typical Values of Reverse Current vs.Reverse VoltageFig. 3 - Typical Junction Capacitance vs. Reverse VoltageFig. 4 - Maximum Thermal Impedance Z thJC Characteristics元器件交易网 For technical questions, contact: diodes-tech@Document Number: 9419630L30CTSPbF/30L30CT-1PbFVishay High Power ProductsSchottky Rectifier, 2 x 15 AFig. 5 - Maximum Allowable Case Temperature vs.Average Forward CurrentFig. 6 - Forward Power Loss CharacteristicsFig. 7 - Maximum Non-Repetitive Surge Current (Per Leg)Note(1)Formula used: T C = T J - Pd x R thJC ;Pd = Forward power loss = I F(AV) x V FM at (I F(AV)/D) (see fig. 6)元器件交易网元器件交易网Schottky Rectifier, 2 x 15 A Vishay High Power ProductsORDERING INFORMATION TABLELINKS TO RELATED DOCUMENTSDimensions /doc?95014Part marking information /doc?95008Packaging nformation /doc?95032SPICE model /doc?95287Document Number: 94196For technical questions, contact: diodes-tech@ Disclaimer Legal Disclaimer NoticeVishayAll product specifications and data are subject to change without notice.Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products.No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay.The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.Product names and markings noted herein may be trademarks of their respective owners.元器件交易网Document Number: 。