下载文档原格式
UL Approvals Product Listing(For Use in Hazardous [Classified] Locations)for ASTRO® SRX™ 2200/APX™ 5000/APX 6000/APX 6000XE/APX 6000LiAPX 7000/ APX 7000XE Digital Portable RadiosDocument #: PMLN7376The SRX 2200 / APX 5000 / APX 6000 / APX 6000XE / APX 6000LiRadio Models for HAZ LOC are listed by UL to standards:ANSI/TIA 4950-A and CAN/CSA C22.2 NO. 157-92Classification Rating Class I, Division 1, Groups C, D;Class II, Division 1, Group E, F, G;Class III, Hazardous (Classified) Locations.ANSI/ISA 12.12.01-2015 and CAN/CSA C22.2 No.213-15Class I, Division 2, Groups A, B, C, D;T3C. Tamb = -25° C to +60° C.Intrinsically Safe (Sécurité Intrinsèque)when used with Motorola Battery: NNTN8921A NNTN8930A 7.4VThe APX 7000 / APX 7000XE Radio Models for HAZ LOC are listed by UL to standards:ANSI/TIA 4950-A and CAN/CSA C22.2 NO. 157-92Classification Rating Class I, Division 1, Group D;Class II, Division 1, Group E, F, G;Class III, Hazardous (Classified) Locations.ANSI/ISA 12.12.01-2015 and CAN/CSA C22.2 No.213-15Class I, Division 2, Groups A, B, C, D;T3C. Tamb = -25° C to +60° C.Intrinsically Safe (Sécurité Intrinsèque)when used with Motorola Battery: NNTN8921A NNTN8930A 7.4VMOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective owners.© 2016 by Motorola Solutions, Inc. All Rights Reserved. 03/16*PMLN7376B*PMLN7376BMotorola Solutions, Inc.1303, E. Algonquin Rd., Schaumburg,IL 60196, U.S.A.Operational Cautions for Intrinsic Safe Equipment Radio unit must be ordered with the intrinsic safety option and shipped from the Motorola manufacturing facility with the hazardous location certification label. Radio will not be upgraded to this capability or labeled once it has been shipped.Operational CautionsOperational Warnings•DO NOT disassemble, heat above 100 °C ( 212 °F ), crush Array or incinerate Li-Ion Battery NNTN8930A and NNTN8921Ato avoid risk of fire, explosion and burns.•Failure to use a Motorola intrinsically safe battery oraccessory specifically certified for that radio unit willnegate the certification rating and could result in unsafecondition in hazardous areas.•DO NOT disassemble an intrinsically safe product in anyway that exposes the internal circuits of the unit. This couldresult in unsafe condition in hazardous areas.•Unauthorized modification, or incorrect repair or service to the intrinsically safe product could adversely affect thecertification rating and result in unsafe condition inhazardous areas.•Use of non-Motorola parts or substitution of parts will voidthe intrinsic safety approval rating of the Motorola unit andcould result in unsafe condition in hazardous areas.The following Radio models, Batteries and Audio Accessories, can be used with the Radio model series.Note:Regional prefix: AA(NAG), AZ(Asia),LA(Latin America), or MD(Europe)Note:Regional prefix: AA(NAG), AZ(Asia),LA(Latin America), or MD(Europe)APX 6000/XE/LiDescriptionModel700/800 MHz, Model 1.5, Top DisplayH98UCD9PW5AN 700/800 MHz, Model 2.5, Top and Front Displays, Limited Key-padH98UCF9PW6AN 700/800 MHz, Model 3.5, Top and Front Displays, Full Keypad H98UCH9PW7AN VHF, Model 1.5, Top DisplayH98KGD9PW5AN VHF, Model 2.5, Top and Front Displays, Limited Keypad H98KGF9PW6AN VHF, Model 3.5, Top and Front Displays, Full Keypad H98KGH9PW7AN UHF R1, Model 2.5, Top and Front Displays, Limited Keypad H98QDF9PW6ANAPX 5000DescriptionModel700/800 MHz, Model 1.5, Top DisplayH98UCD9PW5ANI 700/800 MHz, Model 2.5, Top and Front Displays, Limited Key-padH98UCF9PW6ANI 700/800 MHz, Model 3.5, Top and Front Displays, Full Keypad H98UCH9PW7ANI VHF, Model 1.5, Top DisplayH98KGD9PW5ANI VHF, Model 2.5, Top and Front Displays, Limited Keypad H98KGF9PW6ANI VHF, Model 3.5, Top and Front Displays, Full Keypad H98KGH9PW7ANISRX 2200Description Model 700/800 MHz, Model 1.5, Top Display, Brown H99UCD9PW5AN 700/800 MHz, Model 3.5, Top and Front Displays, Full Keypad H99UCH9PW7AN VHF, Model 1.5, Top Display, Brown H99KGD9PW5AN VHF, Model 3.5, Top and Front Displays, Full Keypad H99KGH9PW7ANNote:Regional prefix: AA(NAG), AZ(Asia),LA(Latin America), or MD(Europe)AntennasDescription Model 7/8 GPS ANTENNA NAF5085A1/4 WAVE 7/8 STUBBY NAR6595AVHF GPS ANTENNA NAR6593AUHF (380-520) GPS ANTENNA PMAE4065A UHFR1 GPS STUBBY ANTENNA FAF5259AAPX 7000Description Model 700/800 MHz/VHF, Model 1.5, Top Display H97TGD9PW1AN VHF/7/800 MHz, Model 3.5, Top Display, Full Keypad H97TGD9PW1AN UHF R2/7/800 MHz, Model 3.5, Top Display, Full Keypad H97TGD9PW1ANNote:Regional prefix: AA(NAG), AZ(Asia),LA(Latin America), or MD(Europe)APX 7000XEDescription Model 700/800 MHz/VHF, Model 1.5, Top Display H49TGD9PW1AN 700/800 MHz/VHF, Model 3.5, Top Display, Full Keypad H49TGD9PW1AN UHF R1/VHF, Model 3.5, Top Display, Full Keypad H49TGD9PW1ANNote:Regional prefix: AA(NAG), AZ(Asia),LA(Latin America), or MD(Europe)AntennasDescription Model DUAL BAND 7/800 VHF (136-174MHz) GPS ANTENNA NAR6594A1/4 WAVE 7/8 STUBBY (NAR6595)NAR6595A7/800 UHF(380-520) GPS ANTENNA PMAS4001A UHFR2 GPS STUBBY ANTENNA (FAF5260)FAF5260AUHF (380-520) GPS ANTENNA PMAE4065A7/800 GPS ANTENNA NAF5085AUHFR1 GPS STUBBY ANTENNA FAF5259AVHF (136-174) UHFR1(380-520) GPS ANTENNA PMAT4001ABatteriesDescription Model TIA4950 BATT IMPRES 2 LIION STD NNTN8930ATIA4950 BATT IMPRES 2 LIION 4500T (HIGH CAP)NNTN8921AAccessories for SRX 2200 / APX 5000 / APX 6000 / APX 6000XE / APX 6000Li / APX 7000 / APX 7000XEDescription ModelPMLN6123A IMPRES 3-Wire Surveillance Kit with translucent tube, program-mable button, blackIMPRES 3-Wire Surveillance Kit with translucent tube, program-PMLN6124A mable button, beige1-Wire Receive-only earpiece, black PMLN6125A1-Wire Receive-only earpiece, beige PMLN6126A IMPRES 2-Wire Surveillance Kit, programmable button, black PMLN6127A IMPRES 2-Wire Surveillance Kit, programmable button, beige PMLN6128APMLN6129A IMPRES 2-Wire Surveillance Kit with translucent tube, program-mable button, blackIMPRES 2-Wire Surveillance Kit with translucent tube, program-PMLN6130A mable button, beigeEarpiece with Standard Earphone, Beige BDN6666ABDN6668AThree Wire Surveillance Earpiece with Microphone and PTT,BeigeEarpiece with Standard Earphone, Black BDN6726A Earpiece with Extra Loud Earphone, Black BDN6727A Earpiece with Standard Earphone, Black BDN6728ATwo Wire Surveillance Earpiece with Microphone and PTT, Black BDN6729AThree Wire Surveillance Earpiece with Microphone and PTT,BDN6730ABlackTwo Wire Surveillance Earpiece with Microphone and PTT, Black BDN6731ABDN6732AThree Wire Surveillance Earpiece with Microphone and barrelPTT, BlackRemote Speaker Microphone, IP57, Brown NNTN8235A IMPRES Remote Speaker Microphone, Brown NNTN8236APMMN4024A Small Remote Speaker Microphone, IP54, 3.5 mm Jack, ReceiveOnlyRemote Speaker Microphone, Submersible (IP57)PMMN4040APMMN4062A Large Noise Canceling Remote Speaker Microphone, IP54, 3.5mm Jack, Receive OnlyStandard Large IP57 Remote Speaker Microphone (based onPMMN4065A PMM4046 with large speaker)Description Model Remote Speaker Microphone, 3.5 mm Jack PMMN4069AD-Shell Receive Only Earpiece (3.5mm)PMLN4620BD-Shell Core Earset (earset with boom mic) [GCAI]PMLN5096B Heavy Duty Headset PMLN5275COtto Headset, (BTH),PMLN6853A Receive Only Earbud for Remote Speaker Microphone, 3.5 mmRLN4885B Jack, Short Coiled CableRLN4941A Receive Only Earpiece with Translucent Tube, 3.5 mm Jack,Short Coiled Cable, Receive OnlyPSM IP55 WITH 3.5MM JACK RX 18PMMN4059A PSM IP55 WITH 3.5MM JACK RX 24 PMMN4060A PSM IP55 WITH 3.5MM JACK RX 30 PMMN4061A AUDIO ACCY ADPT 3.5MM W/PTT BDN6783B RECEIVE ONLY EARBUD FOR REM SPK MIC(AA)RLN4885BRLN5313B1 Wire Receive only Surveillance Kit with Translucent Tube, BLk,Requires BDN6783RLN6424B Secondary Audio Accessory for Display Remote Speaker Micro-phoneMain housing assembly, black, model 1NHN7030AS Main housing assembly, black, model 2NHN7027AS Main housing assembly, black, model 3NHN7024AS Main housing assembly, yellow, model 1NHN7031AS Main housing assembly, yellow, model 2NHN7028AS Main housing assembly, yellow, model 3NHN7025AS Main housing assembly, green, model 1NHN7032AS Main housing assembly, green, model 2NHN7029AS Main housing assembly, green, model 3NHN7026AS Main housing assembly, orange, model 1NHN7070AS Main housing assembly, orange, model 2NHN7071AS Main housing assembly, orange, model 3NHN7072AS Main housing assembly, blue, model 1NHN7073AS Main housing assembly, blue, model 2NHN7074ASDescription Model Main housing assembly, blue, model 3NHN7075AS Main housing assembly, red, model 1NHN7076AS Main housing assembly, red, model 2NHN7077AS Main housing assembly, red, model 3NHN7078AS Main housing assembly, brown, model 1NHN7080AS Main housing assembly, brown, model 3NHN7079AS Main housing assembly, black, model 3NHN7011AS Main housing assembly, yellow, model 3NHN7054AS Main housing assembly, green, model 3NHN7062AS Main housing assembly, orange, model 3NHN7055AS Main housing assembly, blue, model 3NHN7056AS Main housing assembly, red, model 3NHN7057AS Main housing assembly, black, model 1NHN7012AS Main housing assembly, yellow, model 1NHN7058AS Main housing assembly, green, model 1NHN7063AS Main housing assembly, orange, model 1NHN7059AS Main housing assembly, blue, model 1NHN7060AS Main housing assembly, red, model 1NHN7061AS Main housing assembly, black, model 1150****4001 Main housing assembly, green, model 1150****4003 Main housing assembly, yellow, model 1150****4002。
中继台及其相关参数的简介与计算一、中继台的基本概念中继台可以方便地扩展您的双向通讯系统,让您无线电对讲机的通讯范围随着客户群的扩大而拓展。
中继台帮助您扩大车载台、手持对讲机的呼叫范围和通讯能力,大幅度提高您的工作效率。
中继台又称中转台、转发台,目前常见的有摩托罗拉(MOTOROLA)中继台/中转台,建伍或健伍(KENWOOD)中继台/中转台,威泰克斯(VERTEX STANDARD)中继台/中转台,艾可慕(ICOM)中继台/中转台。
中继台/中转台/转发台,外接天线及馈线就可组成完整的中继系统。
在无线对讲系统中，中继台对于增大通讯距离，扩展覆盖范围扮演着极其重要的角色。
是专业无线通讯系统不可缺少的重要设备。
中继台由收信机和发信机等单元组成。
通常工作于收发异频状态，能够将接收到的已调制的射频信号解调出音频信号传输给其它设备。
同时，还能将其它设备送来的音频信号经射频调制后发射出去。
上面提到的其它设备有各种系统使用的控制器，有无线接驳器等，也包括互联所需要的其它中继台。
将中继台收到的信号直接通过自身的发射机转发出去，这是中继台最基本的应用。
因此，中继台必须能够全双工工作，即收发同时工作，并且发射时不能影响接收机的正常工作。
由于中继台工作的基本特点，再加上多台中继台组合一起使用的特点，对中继台的技术指标相对于移动台要有更高的和更特殊的要求。
除一台中继台组成的单信道常规地面通讯系统之外，还可以利用中继台经同轴电缆，功分器，架设多幅分布天线，实现楼宇、酒店等建筑物地下和地面的覆盖通讯，此外多台中继台组成集群系统以及各种带状或星形结构的通讯网。
中继台调试集成安装的指标直接影响到系统的通讯距离和系统网络语音质量及功能。
二、中继台通讯距离的工程计算1．无线电波传输损耗工程实用公式LM(dB)=88.1+20lgF-20lgh1h2+40lgd式中：F—通讯工作频率(MHz)h1—通讯对象A点天线高度(m)h2—通讯对象B点天线高度(m)d—A点和B点的通讯距离(m)上述实用公式仅限于VHF 150MHz和UHF 400～470MHz频段，并且地形起伏高度在15m左右，通讯距离在65km范围内。
EVX-R70数字中继台DMR Tier 2 标准产品规格表EVX-R70482.6mm （宽） x 132.6mm （高） x 296.5mm （深）后面板更加灵活的模拟、数字和混合模式支持EVX-R70 常规中继台可以在模拟或数字模式下使用，并且可以与任何现有的模拟对讲机一起使用。
其所拥有的“混合模式”实现了模拟和数字模式间的强力切换，提供更灵活的支持。
更强的兼容性能和工作效率eVerge ™ 对讲机采用 TDMA 协议，与全世界 74% 的数字对讲机相兼容。
eVerge ™ 数字对讲机所采用的时分多址（TDMA ）协议保证高效的频率使用 效率，并相对于 FDMA 技术降低了整体设备支出。
采用 TDMA 协议的数字对讲机系统可在不增加频率的情况下支持双倍的通话组和呼叫。
保持可靠的连续工作性能提供 45 瓦 VHF 频段和 40 瓦 UHF 频段 100% 不间断服务 ，易于整合置入于大多数中继台基站。
中继台的集成式电源配有连接器，支持可选的备用外部直流电池。
多色 LED 状态指示灯LED 指示灯支持轻松监控中继台的状态。
状态指示灯包括：电源、数字／模拟模式、中继台禁用、按时隙模拟／数字发射、按时隙模拟／数字接收。
迈向更好的沟通品质和产品价值拥有数字性能的 eVerge ™ 中继台让您的通讯设备升级变得更轻松。
小巧而精致的设计让 eVerge ™ 中继台，向客户提供更优良的通信能力和使用灵活性。
加强的功能^EIA 机柜安装尺寸^AMBE+2™ 声码器^26 针配件连接器附件^MH-67A8J: 标准话筒^MH-12A8J: 桌面话筒^WMB-1: 墙壁安装套件^E-DC-29: 备用电池电缆EVX-R70产品规格表技术指标 以上各技术指标皆为一般性，如有任何更改，恕不另行通知。
您对威泰克斯对讲机还有其他疑问吗？请即刻与当地的威泰克斯授权经销商联系！Vertex Standard 是 Vertex Standard LMR, Inc. 的注册商标。
V2200 快速使用指南欢迎使用V2200联网视频监控系统，本文档告知您如何使用系统的基本功能。
版权声明本手册内容（包括文字与图片）的版权为Infinova公司所有。
任何个人或法人实体，未经Infinova公司的书面许可，不得以任何形式对其内容进行翻译、修改或改编。
违者将追究其法律责任。
Infinova公司保留在事先不进行任何通知的情况下，对本手册的内容以及产品技术规格进行修改的权利，以便向系统提供最新、最先进的产品。
用户可从Infinova的网站http://www.infi上获得最近的产品更新资料。
商标权声明Infinova®为Infinova公司的注册商标，Infinova公司拥有法定的商标权。
本手册中可能使用的其它商标及商标权属于其合法所有者拥有。
目录目录1. 登录1.1. 更新插件及新安装插件特别说明1.2. 添加信任站点2. 实时视频2.1. 视频浏览2.2. PTZ 控制3. 录像回放3.1. 录像回放3.2. 分段回放4. 录像下载4.1. 录像保存位置设置4.2. 下载录像5. 电视墙切换5.1. 视频上墙5.2. 电视墙 PTZ 控制6. 用户个人树6.1. 创建个人树文件夹6.2. 个人树文件夹操作6.3. 收藏摄像机6.4. 个人树摄像机操作图 1-1 客户端登录1. 登录启动Internet Explorer 或者兼容IE 的浏览器，在地址栏输入登录地址（如: http://10.82.25.251）打开网页，系统进入登录界面，输入用户名密码后点击"登录"按钮登录平台。
在平台网页运行较卡时，需要在上图中红框 2的位置下载工具并运行，及时清理系统运行垃圾；在电脑第一次登录联网共享平台或平台界面提示更新插件时，可以在上图 2的位置下载插件并安装，及时更新插件。
1.1. 更新插件及新安装插件特别说明(1) 第一次访问 V2200客户端的电脑需根据提示下载安装插件。
Installation, Maintenance& Parts ManualTable of ContentsWarnings – General Safety2. . . . . . . . . . . . . . . . . . . . Introduction2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Installation3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RequiredTools3. . . . . . . . . . . . . . . . . . . . . . . . . . . . Mounting When Ordered With Conveyor3. . . . . . . Mounting When Ordered Without Conveyor4. . . . Service Parts 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Return Policy6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .851-468 Rev. CEnd Stop for 2200 Series Conveyors: Installation, Maintenance & Parts Manual851-468 Rev. C2Dorner Mfg. Corp.IntroductionIMPORTANT: Some illustrations may showguards removed. DO NOT operate equipment with-out guards.Upon receipt of shipment:D Compare shipment with packing slip. Contact factory regarding discrepancies.D Inspect packages for shipping damage. Contact carrier regarding damage.D Accessories may be shipped loose. See accessory in-structions for installation.Dorner 2200 Series conveyors are covered by Patent No. 5,174,435, 5,131,529 and corresponding patents and patent applications in other countries.Dorner ’s Limited Warranty applies.Dorner reserves the right to make changes at any time without notice or obligation.Warnings – General SafetyEnd Stop for 2200 Series Conveyors: Installation, Maintenance & Parts ManualDorner Mfg. Corp.3851-468 Rev. CRequired ToolsD Hex key wrenches:2.5 mm, 4 mm, 5 mm D Torque wrenchMounting When Ordered With Conveyor1.Gather components (Figure 1)Figure 1BACA End StopB Spacer (2x)CM5 x 55 Socket Head Screw (2x)Installation Component List2.Insert spacer (B of Figure 2) in both ends of endstop (A).Figure 2BA3.Install end stop with spacers (A of Figure 3) on endof conveyor with M5 screws (CC). Tighten screws to 60 in-lb (7 Nm).Figure 3ACInstallationEnd Stop for 2200 Series Conveyors: Installation, Maintenance & Parts Manual851-468 Rev. C4Dorner Mfg. Corp.Mounting When Ordered Without Conveyor1.Gather components (Figure 4)Figure 4EDBACA End StopB Spacer (2.)C M5 x 45 Socket Head Screw (2x)D Headplate (LH)EHeadplate (RH)Installation Component List2.Remove conveyor end pulley. See “Pulley Remov-al ” on page 13 of “2200 Series End Drive Convey-ors ” manual, part number 851–452.3.Remove bearings from conveyor headplates and install them into new headplates (D & E of Figure 4).See “Bearing Removal and Replacement ” on page 14 of “2200 Series End Drive Conveyors ” manual,part number 851–452.4.Replace end pulley and new headplates. See “PulleyReplacement ” on page 15 of “2200 Series End Drive Conveyors ” manual, part number 851–452.5.Install conveyor belt. See belt installation section onpage 10 of “2200 Series End Drive Conveyors ”manual, part number 851–452.6.Tension the conveyor belt. See “Conveyor BeltTensioning ” on page 11 of “2200 End Drive Conveyors ” manual, part number 851–452.7.Insert spacer (B of Figure 5) in both ends of endstop (A).Figure 5BA8.Install end stop with spacers (A of Figure 6) on endof conveyor with M5 screws (C). Tighten screws to 60 in-lb (7 Nm).Figure 6ACInstallationEnd Stop for 2200 Series Conveyors: Installation, Maintenance & Parts ManualDorner Mfg. Corp.5851-468 Rev. CNOTE: For replacement parts other than those shown on this page, contact an authorized Dorner Service Center or the factory.Figure 721435Service PartsNo returns will be accepted without prior written factory authorization. When calling for authorization, please have the following information ready for the Dorner Factory representative or your local distributor: and address of customer.2.Item(s) being returned.3.Reason for return.4.Customer ’s original order number used when ordering the item(s).5.Dorner or distributor invoice number.A representative will discuss action to be taken on the Returned items and provide a Returned Goods Authorization Number to reference.There will be a 15% restocking charge on all new items returned for credit where Dorner was not at fault. These will not be accepted after 60 days from original invoice date. The restocking charge covers inspection, cleaning,disassembly, and reissuing to inventory.If a replacement is needed prior to evaluation of returned item, a purchase order must be issued. Credit (if any) is issued only after return and evaluation is complete.Dorner has representatives throughout the world. Feel free to contact Dorner for the name of your local representative. Our technical sales and service staff will gladly help with your questions on Dorner products.For a copy of Dorner ’s Limited Warranty, contact factory, distributor, service center or visit our website @851-468 Rev. CPrinted in U.S.A.For replacement parts, contact an authorizedDorner Service Center or the factory.Return Policy。
