SEWHACNM称重传感器

美国suncells称重传感器suncells传感器HSX-A是美国SUNCELLS公司出品的一款波纹管称重传感器，材质有合金钢和不锈钢可选，采用全激光焊缝，防护等级高，有防尘、防爆等优点。

而且更好的保证了精度，安装也非常的便捷，不易损坏。

美国suncells传感器是美国注册的称重传感器制造商，因其产品价格低廉，质量上乘，是各大化工厂、试验机厂、电子衡器等等行业单位的***。

完善的售后，强大的技术支持，保证suncells产品的广泛应用跟优良的口碑、桥式结构传感器1、QS/QS-A称重传感器，适用于汽车衡、轨道衡、配料秤等。

型号有：QS-5t,QS-10t,QS-15t,QS-20t,QS-25t,QS-30t,QS-40t,QS-50t。

QS-A-5t,QS-A-10t,QS-A-15t,QS-A-20t,QS-A-25t,QS-A-30t,QS-A-40t,QS-A-50 t。

2、QSB-A/-SS称重传感器，适用于汽车衡、轨道衡、轴量秤、地上衡、仓储秤等。

型号有：QSB-A-10klb,QSB-A-20klb,QSB-A-25klb,QSB-A-40klb,QSB-A-50klb,QSB-A-60k lb,QSB-A-75klb。

QSB-SS-10klb,QSB-SS-20klb,QSB-SS-25klb,QSB-SS-40klb,QSB--SS-50klb,QSB -SS-60klb,QSB-SS-75klb。

3、QSC-A/-SS称重传感器，适用于汽车衡、轨道衡、轴量秤、地上衡、仓储秤等。

QSC-A-5klb,QSC-A-10klb,QSC-A-20klb,QSC-A-25klb,QSC-A-30klb,QSC-A-50kl b,QSC-A-60klb,QSC-A-75klb,QSC-A-100klb。

QSC-SS-5klb,QSC-SS-10klb,QSC-SS-20klb,QSC-SS-25klb,QSC-SS-30klb,QSC-S S-50klb,QSC-SS-60klb,QSC-SS-75klb,QSC-SS-100klb。

美国Transcell称重传感器深圳现代豪方-陈工Transcell技术有限公司，于1981年在美国成立，总部在芝加哥北部的布法罗格罗夫，也是Transcell的仓储，分装，运输中。

，专注于称重传感器，邮用称，高精度天平和工业称。

此外还提供国际标准综合设备服务。

1、美国Transcell系列称重传感器：BAB S 型拉压式称重传感器铝制 5M/10M/15M/20M/50M/100MBSA S型拉压式称重传感器合金钢 25kg/50kg/250LBBSS S型拉压式称重传感器合金钢 100kg-750kg/1T/1.5T/2T/5T/7.5T/10TBSS S型拉压式称重传感器:BSS-25kg、BSS-50kg、BSS-100kg、BSS-500kg、BSS-750kg、BSS-1t、BSS-1.5t、BSS-2t、BSS-2.5t、BSS-5t、BSS-7.5t、BSS-10tBAB S型铝制称重传感器BAB-5M BAB-10M BAB-25M BAB-50M BAB-75M BAB-100M BAB-150M BAB-200MBSA S型称重传感器 BSA-25kg\50kg\250lbBSS-ESH S型称重传感器 200kg-5TBSSD S型称重传感器 5T\15T\20TSBS 单悬臂梁式称重传感器 SBS-250kg、SBS-500kg、SBS-1t、SBS-1.5t SBS-2t、SBS-5t、SBS-7.5t、SBS-10t SB 单悬臂梁式称重传感器SBS-ESH 单悬臂梁式称重传感器SBSK 单悬臂梁式称重传感器TA 悬臂梁式称重传感器TSB 单点式称重传感器DBS 双剪梁式称重传感器 DBS-1K lb\1.5K lb\2.5K lb\5K.lb\75K lbDBSQ（QY）桥式称重传感器 QY-10t\20t\25t\30t\50tDBS 双剪梁式称重传感器: DBS-1K lb DBS-1.5K lb DBS-2.5K lb DBS-3K.lb DBS-5K lb DBS-10K lb DBS-15K lb DBS-20K lb DBS-25 K.lb DBS-30K lb DBS-50K lb DBS-75K lbDBSQ（QY）桥式称重传感器数字式称重传感器: QY-10t QY-20t QY-25t QY-30t QY-50tFAD 单点式称重传感器 FAJ 单点式称重传感器 FAS 单点式称重传感器FAV 箱式称重传感器: FAV-60kg FAV-150kg FAV-250kg FAV-500kgFAY 箱式称重传感器: FAY-100kg FAY-150kg FAY-200kg FAY-250kg FAY-300kg FAY-500kg FAY-635kg FAY-1000kgFGA 箱式称重传感器:FGA-3kg FGA -5kg FGA -10kg FGA -15kg FGA -20kg FGA -30kg FGA-50kgK700 K800箱式称重传感器MSB 轮辐式称重传感器DBST 柱式称重传感器DBSL 轮辐式称重传感器DBSL-5T/DBSL-10T/DBSL-20T/DBSL-30TTSB 单点式称重传感器/DBS 双剪梁式称重传感器 DBS-1K lb\1.5K lb\2.5K lb\5K.lb\75K lbDBSQ（QY）桥式称重传感器 QY-10t\20t\25t\30t\50t/FAD 单点式称重传感器TC-2005 计数秤/TC-2010 计数秤/TP-500 称量计数系统/MS-1000 工业秤/MSB-500BW 工业秤MSB-500E 工业秤/PC系列工业秤/SPC系列工业秤/SP系列工业秤/SRP-300 工业秤/SSB-3500 工业秤MSB-4300 多用途工业秤/WEIGHBLOK系列工业秤/SSP-3400 平台秤/MSP-4200 平台秤CR-500 吊钩秤/Guardian系列地磅/PALLET RUNNER 叉车秤/Weigh Beam便携式称重系统/数字式称重传感器FAV 箱式称重传感器 FAV-60kg\150kg\250kg\500kgFAY 箱式称重传感器 FAY—100kg\150kg\200kg\500kg\1000kgMSB 轮辐式称重传感器/DBST 柱式称重传感器/NEPTUNE-4500 检重秤/NEPTUNE-4500显示仪表NEPTUNE-5500 检重秤/NEPTUNE-5500 显示仪表/NEPTUNE-6500检重秤/NEPTUNE-6500显示仪表T1-500BW 数字显示仪表/T1-500E 称重显示仪表/T1-500E-SS 耐用称重显示仪表/T1-500SL 耐用显示仪表T1-600ESS化工称重显示仪表/T1-1500 高精度显示仪表/T1-1600 高精度显示仪表/大屏幕显示器数字汽车衡称重管理软件操作手册/RF 无线数据传送模块使用说明/MP-20 热敏打印机2、长期供应美国Transducer Techniques称重传感器及仪表（1）Transducer Techniques称重传感器力传感器：HFG：11LB 45LB 110LB;GSO: 10,25,30,50,100,150,250,500,1K GRAMS;MDB: 2.5, 5, 10, 25, 50, 75, 100 LBS;MLP: 10,25,50,75,100,150,200,300,500,750,1K LBS;SLB: 25, 50, 100, 250,500, 750, 1K LBS.LBO: 100,250,500,750,1K,2K,3K,5K,10K,15K,20K,30K,50K LBS.LBC: 100,250,500,750,1K,2K,3K,5K,10K,15K,20K,30K,50K LBS;LBM: 50,100,200,500,1k,2K,2.5K,5K,8K,10K LB;MLC: 2K, 3K, 5K, 7.5K, 10K, 15K,20K,30K lb;CLC: 50K, 100K, 200K, 300K, 400K lb(柱式）；THA：50, 100, 250, 500 LBS.THB：100, 250, 500, 1,000, 2,000 LBS.；THC：3,000, 5,000, 7,500, 10,000 LBS；THD：2K, 3K, 5K, 7.5K, 10K,15K, 20K, 30K, 50K LBS;LWO: 2.4K, 4K, 7K, 10K, 14K, 20K, 25K, 30K, 45K, 60K, 80K,125K, 190K, 260K, 300K lb;SSM: 50,100,200,500,1K, 2K, 2.5K,5K, 8K, 10K LBS;DSM: 50,100,200,500,1K, 2K, 2.5K,5K, 8K, 10K LBS;TLL: 500, 1K, 2K, 3K, 5K, 10K, 20K, 30K, 50K lb;SBO: 50, 100, 200, 300, 500, 750,1K, 2K, 3K, 5K LBS;SWO: 1K, 2K, 3K, 5K,10K, 20K, 30K, 50K LBS;HSW: 1K, 2K, 3K, 5K,10K, 20K, 30K, 50K LBS;LPO: 500, 1k, 2k, 3k, 5k, 10k, 20k LBS;LPU: 100,250,500,1K,2K,3K,4K,5K,7.5K,10K,15K,20K,30K, 50K LBS;SWP: 1K, 2K, 3K,5K, 10K, 20K, 50K LBS ;CLP: 750, 1.5K, 3K, 6K,12.5K, 18K, 30K lb ;(2) Transducer Techniques称重传感器梁式传感器：TBS：0.25, 0.50, 1, 2, 5,10, 20, 40 LBS；EBB：1, 2, 5,10 Kg.LSP：1, 2, 5,10 Kg；ESP：6, 10, 15, 20, 25, 30, 35 Kg.SPL：65, 100, 150, 200, 300, 500 Kg.；SBL：500, 1K, 2K, 2.5K, 3K,4K, 5K, 10K, 15K,20K LBS.(3) Transducer Techniques称重传感器扭矩传感器：RST：10，20，50，100，200，500，1K，2K，5K，12K，30K inch lbs;RSS：10, 20, 50, 100, 250, 600, 1K FT-LBS ；RTS：5, 10, 25, 50, 100, 200, 500, 1K Oz-inch;TRT: 25, 50, 100, 200, 500 INCH-LBS;TRS: 500, 1K, 2K, 5K, 10K, 20K, 50K, 100K INCH LBS;SWS: 10, 20, 50, 100, 250, 600, 1K FT-LBS ;STS: 600, 1.2K, 2K, 3K, 6K, 12K inch lbs ;显示仪表系列：DPM-2 DPM-3 TIO-3000 PHM-100；接线盒、放大器：TMO-2、TMO-2A、PSM-F10、PSMR、DSP-1、TM0-1、TMO-1-24VDC、SJB-4、TSM-3MV3、供应美国Transducer Techniques称重传感器及仪表（1）力传感器：HFG：11LB 45LB 110LB;GSO: 10,25,30,50,100,150,250,500,1K GRAMS;MDB: 2.5, 5, 10, 25, 50, 75, 100 LBS;MLP: 10,25,50,75,100,150,200,300,500,750,1K LBS;SLB: 25, 50, 100, 250,500, 750, 1K LBS.LBO: 100,250,500,750,1K,2K,3K,5K,10K,15K,20K,30K,50K LBS.LBC: 100,250,500,750,1K,2K,3K,5K,10K,15K,20K,30K,50K LBS;LBM: 50,100,200,500,1k,2K,2.5K,5K,8K,10K LB;MLC: 2K, 3K, 5K, 7.5K, 10K, 15K,20K,30K lb;CLC: 50K, 100K, 200K, 300K, 400K lb(柱式）；THA：50, 100, 250, 500 LBS.THB：100, 250, 500, 1,000, 2,000 LBS.；THC：3,000, 5,000, 7,500, 10,000 LBS；THD：2K, 3K, 5K, 7.5K, 10K,15K, 20K, 30K, 50K LBS;LWO: 2.4K, 4K, 7K, 10K, 14K, 20K, 25K, 30K, 45K, 60K, 80K,125K, 190K, 260K, 300K lb;SSM: 50,100,200,500,1K, 2K, 2.5K,5K, 8K, 10K LBS;DSM: 50,100,200,500,1K, 2K, 2.5K,5K, 8K, 10K LBS;TLL: 500, 1K, 2K, 3K, 5K, 10K, 20K, 30K, 50K lb;SBO: 50, 100, 200, 300, 500, 750,1K, 2K, 3K, 5K LBS;SWO: 1K, 2K, 3K, 5K,10K, 20K, 30K, 50K LBS;HSW: 1K, 2K, 3K, 5K,10K, 20K, 30K, 50K LBS;LPO: 500, 1k, 2k, 3k, 5k, 10k, 20k LBS;LPU: 100,250,500,1K,2K,3K,4K,5K,7.5K,10K,15K,20K,30K, 50K LBS;SWP: 1K, 2K, 3K,5K, 10K, 20K, 50K LBS ;CLP: 750, 1.5K, 3K, 6K,12.5K, 18K, 30K lb ;(2)梁式传感器：TBS：0.25, 0.50, 1, 2, 5,10, 20, 40 LBS；EBB：1, 2, 5,10 Kg.LSP：1, 2, 5,10 Kg；ESP：6, 10, 15, 20, 25, 30, 35 Kg.SPL：65, 100, 150, 200, 300, 500 Kg.；SBL：500, 1K, 2K, 2.5K, 3K,4K, 5K, 10K, 15K,20K LBS.(3)扭矩传感器：RST：10，20，50，100，200，500，1K，2K，5K，12K，30K inch lbs;RSS：10, 20, 50, 100, 250, 600, 1K FT-LBS ；RTS：5, 10, 25, 50, 100, 200, 500, 1K Oz-inch;TRT: 25, 50, 100, 200, 500 INCH-LBS;TRS: 500, 1K, 2K, 5K, 10K, 20K, 50K, 100K INCH LBS;SWS: 10, 20, 50, 100, 250, 600, 1K FT-LBS ;STS: 600, 1.2K, 2K, 3K, 6K, 12K inch lbs ;显示仪表系列：DPM-2 DPM-3 TIO-3000 PHM-100；接线盒、放大器：TMO-2、TMO-2A、PSM-F10、PSMR、DSP-1、TM0-1、TMO-1-24VDC、SJB-4、TSM-3MV4、供应Vishay nobel称重传感器压力传感器KIS-1、KIS-2、KIS-3、KIS-8、KIS-9、KIS-11、KIM-1、 KISD-6、KOM-1、 KOSD-40、 KOSD、 KIP-1威世诺贝尔Vishay Nobel的产品范围包括用于制药、化学、食品和其它需成批处理产业的高质量的测压元件、仪器和软件。

OS100 SERIES Mini-Infrared Transmitter e-mail:**************For latest product manuals: Shop online at User’s G ui d e***********************Servicing North America:U.S.A. Omega Engineering, Inc.Headquarters: Toll-Free: 1-800-826-6342 (USA & Canada only)Customer Service: 1-800-622-2378 (USA & Canada only)Engineering Service: 1-800-872-9436 (USA & Canada only)Tel: (203) 359-1660 Fax: (203) 359-7700e-mail:**************For Other Locations Visit /worldwideThe information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains, and reserves the right to alter specifications without notice.Table of ContentsSection ...................................................................PageSafety Warnings and IEC Symbols (iii)Caution and Safety Information (iii)Section 1 Introduction ....................................................................1-1Section 2Installation ......................................................................1-12.1 Unpacking and Inspection ......................................1-12.2 Electrical Connection ..............................................2-1Section 3Operation ........................................................................3-13.1 Main Board ................................................................3-13.2 Ambient Temperature ..............................................3-23.3 Atmospheric Quality ................................................3-33.4 Measuring Temperature ..........................................3-33.5 Alarm Setting ............................................................3-43.6 Adding Extension Cable...........................................3-4Section 4 Laser Sight Accessory ...................................................4-14.1 Warning and Cautions .............................................4-14.2 Operating the Laser Sight Accessory .....................4-1Section 5 Specifications .................................................................5-15.1 General .......................................................................5-15.2 Laser Sight Accessory (OS100-LS) ..........................5-2Section 6Emissivity Table .............................................................6-1iTable of FiguresFigure Description Page2-1Power Supply & Analog Output Connections ..........2-12-2 Alarm Output Connection ............................................2-13-1 Main PC Board ...............................................................3-23-2 Sensor..............................................................3-2Housing3-3 Optical Field of View .....................................................3-43-4Setting the Temperature Engineering Unit..................3-43-5Mounting Bracket OS100-MB .......................................3-53-6Water Cooling Jacket, OS100-WC ................................3-53-7Typical Water Cool Jacket Assembly ...........................3-53-8Air Purge Collar, OS100-AP..........................................3-63-9DIN Rail Mounting Adapter, OS100-DR ....................3-63-10NEMA-4 Aluminum Enclosure ....................................3-64-1Laser Sighting Accessory, OS100-LS ............................4-24-2Laser Warning Label ......................................................4-2iiSafety Warnings and IEC SymbolsThis device is marked with international safety and hazard symbols in accordance with IEC 1010. It is important to read and follow all precautions and instructions in this manual before operating or commissioning this device as it contains important information relating to safety and EMC. Failure to follow all safety precautions may result in injury and or damage to your calibrator. IEC symbols DescriptionCaution and Safety Information• If the equipment is used in a manner not specified in this manual, the protection provided by the equipment may be impaired.• The installation category is one (1).• There are no user replaceable fuses in this product• The output terminals of this product are for use with equipment (digital meters, chart recorders, etc,) which have no accessible five parts. Such equipment should comply with all the applicable safety requirements.• Do not operate the equipment in flammable or explosive environments.• All connections to the thermometer should be made via a shielded cable, 24 AWG stranded wire with the following ratings: 300V , 105°C (221°F), PVC insulation.• Power must be disconnected before making any electrical connections.• The power supply used to power the thermometer should be VDE or UL approved with the following ratings: 12 to 24vdc @150mA with overload protection of 500mA.iiiCaution, refer to accompanying documentsDirect Current Laser SymbolFrame or ChassisNOTES: ivSection 1 - IntroductionThe low cost OS101 mini-infrared transmitter provides non-contacttemperature measurement for industrial applications. The unit measures atemperature range of -18 to 538°C (0-1000°F) and provides a linear analogoutput of either 4-20 mA, 0-5 VDC, K type TC, 1 mV/°C, or 1 mV/°F.The new OS102 mini-infrared transmitter has all the functions of OS101plus a built-in LED display that shows the measured temperature indegrees F or degrees C which is switchable in the field.The miniature sensor head design 2.5 cm dia. x 6.3 cm Length (1" x 2.5") isideal for measuring temperature in confined, and hard to reach places.The aluminum sensor head as well as the rugged electronic housing (Diecast Aluminum) are NEMA-4 rated.The sensor head is connected to the electronic housing via a 1.82 m (6 feet)shielded cable as standard. The unit provides field adjustable alarmoutput.Section 2 - Installation2.1UnpackingRemove the packing list and verify that you have received all yourequipment. If you have any questions about the shipment, please callCustomer Service at:1-800-622-2378 or 203-359-1660. We can also be reached on the internet:e-mail:**************When you receive the shipment, inspect the container and equipment forany signs of damage. Note any evidence of rough handling in transit.inspection. After examination and removing contents, save packing material and carton in theevent reshipment is necessary.The following items are supplied in the box:• The infrared transmitter including the sensor head and the 1.82 m(6 feet) shielded cable• User's Manual• Mounting Nut1-1The following describes the ordering information:OS102 or OS101 - MA- *,**, where The following optional accessories are available:Here are the Features of OS101 and OS102 infrared transmitters:2.2Electrical Connection Sensor Head Cable - The Sensor head is pre-wired to a 1.8 m (6 feet)shielded cable. Plug & lock-in the male connector to the mating female connector on the aluminum housing.Power & Output Connection - Open the cover of the main aluminum housing. Slide the cable through the strain relief and connect the wires to the terminal block on the board as shown in Fig. 2-1. For Alarm output connection, refer to Fig. 2-2.2-1MA - 4/20 mA output V1 - 0 to 5 VDC output K - Thermocouple output, K type MV - Millivolt output C - 1 mV/°C output F - 1 mV/°F output HT- High temperature sensor head3-1Figure 2-2. Alarm Output Connection Section 3 - Operation3-1Main BoardThe Main Board is shown in Fig. 3-1. Here are the important components on the board:(1) - Terminal Block for Power & Output connections(2) - Single Turn Potentiometer to adjust Emissivity in tenths (0.x_)(3) - Single Turn Potentiometer to adjust Emissivity in hundreds (0._x)(4) -Slide switch to select between real time (Normal Operation) and alarm set point(5) - Alarm set point adjust, P4(6) - Sensor Head connection(7) - Input Zero adjust, P3(8) - Input Span adjust, P2(9) - Output Zero adjust, P5(10) - Output Span adjust, P6Figure 3-1. Main PC Board3.2Ambient TemperatureThe Sensing head can operate in an ambient temperature of 0 to 70°C (32to 158°F). The Sensing head in the high temperature model (-HT) can operate in an ambient temperature of 0 to 85°C (32 to 185°F) without any cooling required. The Sensing head can operate up to 200°C (392°F) using the water cool jacket accessory OS100-WC (See Fig. 3-6).There is a warm up period of 3 minutes after power up. After the warm up period, temperature measurement can be made.When the ambient temperature around the sensor head changes abruptly,the sensor head goes through thermal shock. It takes a certain amount of time for the sensor head to stabilize to the new ambient temperature. For example, it takes about 30 minutes for the sensor head to stabilize going from 25°C to 50°C (77 to 122°F) ambient temperature.The sensor head dimensions are shown in Fig. 3-2.Figure 3-2. Sensor Housing3-23-33.3Atmospheric QualityEnvironments with smoke, dust, and fumes dirty up the optical lens, and cause erroneous temperature readings. To keep the surface of the optical lens clean, the air purge collar accessory is recommended, OS100-AP , See Fig. 3-7.3.4Measuring TemperatureBefore starting to measure temperature, make sure that the following check list is met:ߜ The power and analog output connections are made (Fig. 2-1).ߜThe sensor head is connected to the main unit.ߜThe slide switch (SW1) on the main board is set to real time (Fig. 3-1).ߜThe target is larger than the optical field of view of the sensor head (Fig. 3-3).ߜThe emissivity adjustment on the main board is set properly (Fig. 3-1).ߜThe output load is within the product specification.On OS102 transmitters, follow these additional steps:ߜ The temperature display is set to °F or °C (Fig. 3-4)ߜ For 4-20mA output models, make sure an output load is added, ie. 250ohms.Figure 3-3. Optical Field Of ViewFigure 3-4. Setting the Temperature Engineering Unit3.5Alarm SettingThe unit provides 0-100% alarm set point adjustment. Here is an exampleof an alarm setting.• An OS101-MA(4/20 mA output), the alarm is to be set at 400°Ftemperature.• Connect the alarm output as shown in Fig. 2-2.• Set the slide switch (SW1) on the main board to the Alarm position.• Measure the analog output, and set the Potentiometer P4 until theoutput reads 10.4 mA which is 40% (400°F) of the temperature range.40 x (20-4)[10.4mA=+ 4]100• Set the slide switch (SW1) back to the Real Time position.• If the temperature reading is below the alarm set point, the alarmoutput stays high, otherwise it goes low.On the OS102, you can set the alarm set point directly based on thetemperature display.3.6Adding Extension CableYou can add extension cable between the Sensor Head and the mainelectronic housing up to 15.2 m (50 feet). After adding the extension cable,the Zero input potentiometer, P3 may be re-adjusted. (See Fig. 3-1, forproper analog output reading)The following figures show the mounting bracket (OS100-MB), Watercooling jacket (OS100-WC), Air purge collar (OS100-AP), DIN RailMounting adapter (OS-100-DR), and the main aluminum enclosure. TheDIN Rail Mounting adapter (OS100-DR) is mounted to the bottom of themain aluminum enclosure using two 4-40 screws.A typical water cool jacket assembly is shown in Fig. 3-7, on the following page.1. Mounting Nut2. Mounting Bracket3. Water Cool Jacket4. Sensor Head3-4Figure 3-5. Mounting Bracket OS100-MBFigure 3-6. Water Cooling Jacket, OS100-WCFigure 3-7. Typical Water Cool Jacket Assembly3-5Figure 3-8. Air Purge Collar, OS100-APFigure 3-9. DIN Rail Mounting Adapter, OS-100-DRFigure 3-10. NEMA-4 Aluminum Enclosure3-6Section 4 - Laser Sight Accessory4.1Warning and Cautionsbelow:•Use of controls or adjustments or performance of procedures other than those specified here may result in hazardous radiation exposure.• Do not look at the laser beam coming out of the lens or view directly with optical instruments - eye damage can result.• Use extreme caution when operation the laser sight accessory • Never point the laser accessory at a person • Keep out of the reach of all children4.2Operating the Laser Sight AccessoryThe laser sight accessory screws onto the front of the sensor head. This accessory is only used for alignment of the sensor head to the target area.After the alignment process, the accessory has to be removed from the front of the sensor head before temperature measurement.The laser sight accessory is powered from a small compact battery pack (included with the accessory). Connect the battery pack to the accessory using the cable provided. Aim at the target, and turn on the battery power using the slide switch on the battery pack. Adjust the sensor head position so that the laser beam points to the center of the target area. Turn off the battery pack, and remove the laser sighting accessory from the sensor head. See Fig. 4-1 for reference.4-14-2Figure 4-2. Laser Warning LabelSection 5 - Specifications5.1 - GeneralTemperature Range-18 to 538°C (0 to 1000°F)Accuracy @ 22°C (72°F)±2% of Rdg. or 2.2°C (4°F) whichever is ambient temperature & greateremissivity of 0.95 or greaterOptical Field of View6:1 (Distance/Spot Size)Repeatability±1% of Rdg.Spectral Response 5 to 14 micronsResponse Time150 msec (0 to 63% of final value)Emissivity Range0.1 to 0.99, adjustableOperating Ambient TemperatureMain Transmitter0 to 50°C (32 to 122°F)Sensor Head0 to 70°C (32 to 158°F)Sensor Head (-HT Model)0 to 85°C (32 to 185°F)Sensor Head with OS100-WC(Water Cooling Jacket)0 to 200°C (32 to 392°F)Operating Relative Humidity Less than 95% RH, non-condensingWater Flow Rate for OS100-WC0.25 GPM, room temperatureThermal Shock About 30 minutes for 25°Cabrupt ambient temperature change Warm Up Period 3 minutesAir Flow Rate for OS100-AP 1 CFM (0.5 Liters/sec.)Power12 to 24 VDC @ 100 mAAnalog OutputsMV-F 1 mV/°FMV-C 1 mV/°CK K Type TC - OS101 onlyMA 4 to 20 mAV10 to 5 VDCOutput Load requirementsMin. Load (0 to 5VDC) 1 K-OhmsMax. Load (4 to 20 mA)(Supply Power - 4 )/20 mATransmitter Housing NEMA-4 & IP65, Die Cast AluminumSensor Head Housing NEMA-4 , AluminumAlarm Output Open Drain, 100 mAAlarm Set Point0 to 100% , Adjustable via P4Alarm Deadband14°C (25°F)5-15-25.1 - General Con’t.DimensionsSensor Head25.4 OD. x 63.5 mm L(1" OD. x 2.5" L)Main Housing, OS10165.5 W x 30.5 H x 115.3 mm L(2.58" W x 1.2" H x 4.54" L)Main Housing, OS10265.5 W x 55.9 H x 115.3 mm L(2.58" W x 2.2" H x 4.54" L)Weight 272 g (0.6 lb)5.2Laser Sight Accessory (OS100-LS)Wavelength (Color)630 - 670 nm (Red)Operating Distance (Laser Dot)Up to 9.1 m (30 ft.)Max. Output Optical Power Less than 1 mW at 22°F ambienttemperature.European Classification Class 2, EN60825-1/11.2001Maximum Operating current45 mA at 3 VDCFDA Classification Complies with 21 CFR 1040.10,Class II Laser ProductBeam Diameter 5 mmBeam Divergence< 2 mradOperating Temperature0 to 50°C (32 to 122°F)Operating Relative Humidity Less than 95% RH, non-condensingPower Switch ON / OFF , Slide switch on the BatteryPackPower Indicator Red LEDPower Battery Pack, 3 VDC (Consists of two 1.5VDC AA size Lithium Batteries) Laser Warning Label Located on the head sight circumferenceIdentification Label Located on the head sight circumferenceDimensions38 DIA x 50.8 mm L(1.5" DIA x 2" L)Section 6 - Emissivity Table6-1Material Emissivity (ε)Aluminum – pure highly polished plate . . . . . . . . . . . . . . . . . . . . . . . . 0.04 to 0.06Aluminum – heavily oxidized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.20 to 0.31Aluminum – commercial sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.09Brass – dull plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.22Brass – highly polished, 73.2% Cu, 26.7% Zn. . . . . . . . . . . . . . . . . . . . . . . . . 0.03Chromium – polished. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.08 to 0.36Copper – polished. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.05Copper – heated at 600°C (1112°F). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.57Gold – pure, highly polished or liquid. . . . . . . . . . . . . . . . . . . . . . . . . 0.02 to 0.04Iron and steel (excluding stainless)– polished iron . . . . . . . . . . . . . . . . 0.14 to 0.38Iron and steel (excluding stainless)– polished cast iron. . . . . . . . . . . . . . . . . . . 0.21Iron and steel (excluding stainless)– polished wrought iron . . . . . . . . . . . . . . . 0.28Iron and steel (excluding stainless)– oxidized dull wrought iron . . . . . . . . . . . . 0.94Iron and steel (excluding stainless)– rusted iron plate . . . . . . . . . . . . . . . . . . . 0.69Iron and steel (excluding stainless)– polished steel. . . . . . . . . . . . . . . . . . . . . . 0.07Iron and steel (excluding stainless)– polished steel oxidized at600°C (1112°F). . . . . . . . . . . . . . . . . . . . 0.79Iron and steel (excluding stainless)– rolled sheet steel . . . . . . . . . . . . . . . . . . . 0.66Iron and steel (excluding stainless)– rough steel plate . . . . . . . . . . . . . 0.94 to 0.97Lead – gray and oxidized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.28Mercury . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.09 to 0.12Molybdenum filament . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.10 to 0.20Nickel – polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.07Nickel – oxidized at 649 to 1254°C (1200°F to 2290°F). . . . . . . . . . . 0.59 to 0.86Platinum – pure polished plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.05 to 0.10Platinum – wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.07 to 0.18Silver – pure and polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.02 to 0.03Stainless steel – polished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.07Stainless steel – Type 301 at 232 to 942°C (450°F to 1725°F). . . . . . . 0.54 to 0.63Tin – bright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.06Tungsten – filament . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.39Zinc – polished commercial pure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.05Zinc – galvanized sheet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.23M E T A L S6-2Material Emissivity (ε) Asbestos Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.96 Asphalt, tar, pitch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.95 to 1.00 Brick– red and rough . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.93 Brick– fireclay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.75 Carbon– filament . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.53 Carbon– lampblack - rough deposit . . . . . . . . . . . . . . . . . . . . . . . . . .0.78 to 0.84 Glass- Pyrex, lead, soda . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.85 to 0.95 Marble– polished light gray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.93 Paints, lacquers, and varnishes– Black matte shellac . . . . . . . . . . . . . . . . . . . .0.91 Paints, lacquers, and varnishes– aluminum paints . . . . . . . . . . . . . . . .0.27 to 0.67 Paints, lacquers, and varnishes– flat black lacquer . . . . . . . . . . . . . . .0.96 to 0.98 Paints, lacquers, and varnishes– white enamel varnish . . . . . . . . . . . . . . . . . .0.91 Porcelain– glazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.92 Quartz– opaque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.68 to 0.92 Roofing Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.91 Tape– Masking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.95 Water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.95 to 0.96 Wood– planed oak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.90 NONMETALSNOTES:6-3NOTES: 6-4OMEGA’s policy is to make running changes, not model changes, whenever an improvement is possible. T his affords our customers the latest in technology and engineering.OMEGA is a trademark of OMEGA ENGINEERING, INC.© Copyright 2017 OMEGA ENGINEERING, INC. All rights reserved. T his document may not be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form, in whole or in part, without the prior written consent of OMEGA ENGINEERING, INC.FOR WARRANTY RETURNS, please have the following information available BEFORE contacting OMEGA:1. P urchase Order number under which the product was PURCHASED,2. M odel and serial number of the product under warranty, and3. Repair instructions and/or specific problems relative to the product.FOR NON-WARRANTY REPAIRS, consult OMEGA for current repair charges. Have the following information available BEFORE contacting OMEGA:1. Purchase Order number to cover the COST of the repair,2. Model and serial number of the product, and 3. Repair instructions and/or specific problems relative to the product.RETURN REQUESTS/INQUIRIESDirect all warranty and repair requests/inquiries to the OMEGA Customer Service Department. BEFORE RET URNING ANY PRODUCT (S) T O OMEGA, PURCHASER MUST OBT AIN AN AUT HORIZED RET URN (AR) NUMBER FROM OMEGA’S CUST OMER SERVICE DEPART MENT (IN ORDER T O AVOID PROCESSING DELAYS). The assigned AR number should then be marked on the outside of the return package and on any correspondence.T he purchaser is responsible for shipping charges, freight, insurance and proper packaging to preventbreakage in transit.WARRANTY/DISCLAIMEROMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a period of 25 months from date of purchase. OMEGA’s WARRANTY adds an additional one (1) month grace period to the normal two (2) year product warranty to cover handling and shipping time. This ensures that OMEGA’s customers receive maximum coverage on each product.If the unit malfunctions, it must be returned to the factory for evaluation. OMEGA’s Customer Service Department will issue an Authorized Return (AR) number immediately upon phone or written request. Upon examination by OMEGA, if the unit is found to be defective, it will be repaired or replaced at no charge. OMEGA’s WARRANT Y does not apply to defects resulting from any action of the purchaser, including but not limited to mishandling, improper interfacing, operation outside of design limits, improper repair, or unauthorized modification. T his WARRANT Y is VOID if the unit shows evidence of having been tampered with or shows evidence of having been damaged as a result of excessive corrosion; or current, heat, moisture or vibration; improper specification; misapplication; misuse or other operating conditions outside of OMEGA’s control. Components in which wear is not warranted, include but are not limited to contact points, fuses, and triacs.OMEGA is pleased to offer suggestions on the use of its various products. However, OMEGA neither assumes responsibility for any omissions or errors nor assumes liability for any damages that result from the use of its products in accordance with information provided by OMEGA, either verbal or written. OMEGA warrants only that the parts manufactured by the company will be as specified and free of defects. OMEGA MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF ANY KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF TITLE, AND ALL IMPLIED W ARRANTIES INCLUDING ANY W ARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. LIMITATION OF LIABILITY: The remedies of purchaser set forth herein are exclusive, and the total liability of OMEGA with respect to this order, whether based on contract, warranty, negligence, indemnification, strict liability or otherwise, shall not exceed the purchase price of the component upon which liability is based. In no event shall OMEGA be liable for consequential, incidental or special damages.CONDITIONS: Equipment sold by OMEGA is not intended to be used, nor shall it be used: (1) as a “Basic Component” under 10 CFR 21 (NRC), used in or with any nuclear installation or activity; or (2) in medical applications or used on humans. Should any Product(s) be used in or with any nuclear installation or activity, medical application, used on humans, or misused in any way, OMEGA assumes no responsibility as set forth in our basic WARRANT Y /DISCLAIMER language, and, additionally, purchaser will indemnify OMEGA and hold OMEGA harmless from any liability or damage whatsoever arising out of the use of theProduct(s) in such a manner.Where Do I Find Everything I Need forProcess Measurement and Control?OMEGA…Of Course!Shop online at TEMPERATUREM U Thermocouple, RTD & Thermistor Probes, Connectors,Panels & AssembliesM U Wire: Thermocouple, RTD & ThermistorM U Calibrators & Ice Point ReferencesM U Recorders, Controllers & Process MonitorsM U Infrared PyrometersPRESSURE, STRAIN AND FORCEM U Transducers & Strain GagesM U Load Cells & Pressure GagesM U Displacement TransducersM U Instrumentation & AccessoriesFLOW/LEVELM U Rotameters, Gas Mass Flowmeters & Flow ComputersM U Air Velocity IndicatorsM U Turbine/Paddlewheel SystemsM U Totalizers & Batch ControllerspH/CONDUCTIVITYM U pH Electrodes, Testers & AccessoriesM U Benchtop/Laboratory MetersM U Controllers, Calibrators, Simulators & PumpsM U Industrial pH & Conductivity EquipmentDATA ACQUISITIONM U Communications-Based Acquisition SystemsM U Data Logging SystemsM U Wireless Sensors, Transmitters, & ReceiversM U Signal ConditionersM U Data Acquisition SoftwareHEATERSM U Heating CableM U Cartridge & Strip HeatersM U Immersion & Band HeatersM U Flexible HeatersM U Laboratory HeatersENVIRONMENTALMONITORING AND CONTROLM U Metering & Control InstrumentationM U RefractometersM U Pumps & TubingM U Air, Soil & Water MonitorsM U Industrial Water & Wastewater TreatmentM U pH, Conductivity & Dissolved Oxygen InstrumentsM3572/1217。

广州兰瑟陈辉编辑
BSS-500kgSS ESH称重传感器
品牌：美国TRANSCELL(传力)/TRANSCELL称重传感器
品名：BSS S型传感器,BSS拉式S型称重传感器
型号：BSS-500kgSS ESH传感器，BSS-500kgSS ESH称重传感器
Features 主要特点
●S型传感器●通过CMC、PA认证●优质不锈钢材质●全密封焊接●安装简便、快速,稳定可靠●适用于材料试验机、配料秤、搅拌站和皮带秤等
Capacities 量程▪ 100kg, 200kg, 250kg, 300kg, 500kg, 750kg, 1000kg
Specification 技术参数
● S型传感器
● 通过CMC、PA认证
● 优质不锈钢材质
● 全密封焊接
● 安装简便、快速,稳定可靠
● 适用于材料试验机、配料秤、搅拌站和皮带秤等
美国transcell BSS-500kgSS ESH称重传感器技术参数：
BSS-500kgSS ESH称重传感器尺寸、参数图：
广州兰瑟陈辉编辑。

称重传感器有哪些品牌？
1、美国VISHAY称重传感器
-美国Tedea-Huntleigh
-美国celtron
-美国vishay nobel
-美国vishay BLH
-美国Revere
-美国Sensortronics 2、美国称重传感器
-美国Transcell
-美国MKCELLS
-美国ZEMIC
-美国AC
-美国RICELAKE
-美国Load Cell Central
-美国Hmcells
3、德国称重传感器
-德国HBM
-德国Sartorius/赛多利斯
-德国FLINTEC/富林泰克
-德国TECSIS
-德国SOEMER
4、瑞士称重传感器
-METTLER托利多
-瑞士FMS
5、西班牙称重传感器
-西班牙Utilcell
-西班牙Sensocar
6、韩国称重传感器
-韩国Bongshin/奉信
-韩国Dacell
-韩国CAS
7、日本称重传感器
-日本NMB(Minebea美蓓亚)
-日本NTS
-日本大和YAMATO
-日本艾安得A&D
-UNIPULSE尤尼帕斯
8、意大利称重传感器,仪表
-意大利狄纳乔Dini Argeo
-意大利Laumas
-意大利NBC
-意大利AEP
-意大利ADOS
-意大利CELMI（塞米）
9、国内知名品牌称重传感器,仪表
-宁波柯力
-广测GUANGCE
-珠海志美CHIMEI
-上海耀华。

OverviewTM SIWAREX WP351 HF weighing electronicsTM SIWAREX WP351 HF weighing electronics1The SIWAREX WP351 is a compact, precise weighing module in the SIMATIC ET 200SP format.With a width of just 20 mm it is one of the slimmest weighing mod­ules on the market, yet its firmware includes the functionalities of an automatic totalizing weighing instrument and checking, bagging and filling scale.All operation modes are part of the firmware and certified according to OIML R-51, R-61, R-76 and R-107. This means the WP351 can be used in both scales requiring official calibration and those that do not, where demands are high regarding speed and accuracy.•Low space requirements with only 20 mm module width •Seamless integration into SIMATIC ET 200SP •1 000 Hz sampling rate und processing time•Installation of legal-for-trade multi-interval/multi-range scales with up to 3 × 6 000 d•Operation with SIMATIC S7-300, S7-400, S7-1200 and S7-1500controllers•Operation in Ethernet IP or Modbus TCP-based systems using ET 200SP multi-field bus IM•Three digital inputs and outputs each ex works•High degree of scalability in connection with all available SIMATIC standard components•Open SIWAREX concept – all settings and parameters accessible,no encapsulated black box in the field•Unrestricted access to all scale parameters and functions from theSIMATIC S7 Controller / HMI•Internal, legal-for-trade protocol memory for up to 1 000 000entries•Commissioning and maintenance from HMI or module-internal web server•Legal-for-trade main display integrated in the SIMATIC HMISIWAREX WP351 offers a compact and extremely versatile solutionfor automatic and non automatic scale applications with high requirements for accuracy and performance. Typical areas of application include:•Silo, hopper and platform scales, requiring official calibration/not requiring official calibration•Totalizing automatic weighing instruments, requiring official calib­ration/not requiring official calibration•Filling scales, requiring official calibration/not requiring official cal­ibration•Static checking scales, requiring official calibration/not requiring official calibration•Automatic dynamic checking scales, not requiring official calibra­tion•Recipe-controlled batch/mixing scalesThe SIWAREX WP351 is a technology module of the SIMAT­IC ET 200SP distributed I/O system.Installation is on a type U0 BaseUnit. The load cells, serial RS 485interface and digital inputs/outputs are wired directly on theBaseUnit with user-friendly push-in terminals. This makes is quick and easy to replace modules without any wiring effort.The web server is addressed via an Ethernet interface in the mod­ule. Should more interfaces and I/O be required, they can be added with the ET 200SP system components.The weighing module controls automatic proportioning, checking and loading processes completely autonomously. The intelligence required is contained in the module firmware, thus representing a standard. Dosing signals can be controlled directly via the three digital outputs – typically coarse flow/fine flow and emptying.Internal control algorithms and signal filters continually optimize and adjust the weighing process.The controller only transfers the desired setpoint, as well as other material-specific parameters, to the module via the WP351 function block. A start command initiates the dosing process, which isexecuted by the weighing module independently of the cycle time of the main controller with maximum accuracy. Finally the WP351carries out a tolerance check and signals the result to the controller.In addition, the result is included in the statistics calculated in the background, which can be called up at any time from the controller.Depending on the operating mode, a log is generated in the intern­al protocol memory, either automatically or initiated by the user. If the scales are calibrated, the log conforms to the requirements of the Weights and Measures Act.The open and standardized SIWAREX concept means that the plant operator can service the scales themselves if necessary.SIWAREX · Updated 8/2023© Siemens AG 2023TM SIWAREX WP351 HF weighing electronics2SIWAREX · Updated 8/2023TM SIWAREX WP351 HF weighing electronics3* At a height of more than 2 000 m above sea level, a derating of the ambient temperature of -1 °C / 100 m has to be adhered to. The maxim­um permissible height is 5 000 meters above sea level. At over 0.6 A total current of the digital outputs DQ, a derating of the ambient tem­perature of -1 °C per 100 mA has to be adhered to. The max. permissible total current is 1.5 A.SIWAREX · Updated 8/2023。

轮辐式称重传感器介绍轮辐式称重传感器的工作原理是通过使车轮传感器变形并产生电信号来测量车辆的重量。

传感器由诸多弯曲的传感单元组成，当车辆驶过时，车轮压迫在传感器上，弯曲传感单元发生弯曲，通过电阻应变片的变化，将压力转换为电信号。

这些电信号被传输到称重仪表或监控系统中进行处理和显示。

轮辐式称重传感器具有多种优点。

首先，它具有高精度和稳定的特性。

传感器的设计使得它能够在广泛的环境条件下工作，并且测量结果的精确度高。

其次，安装和使用方便。

安装传感器时只需将其固定在车轮辐条上，而不需要进行复杂的调整或安装其他设备。

此外，这种传感器还具有耐用性和可靠性。

它的结构坚固，并且能够承受重载和恶劣工作条件下的工作，因此可在长期使用中保持高质量的性能。

最后，轮辐式称重传感器还具有较小的尺寸和轻便的特点。

这使得传感器可以在不同类型的车辆上安装并使用，而不影响其正常运行。

轮辐式称重传感器的应用非常广泛。

比如在物流行业中，这种传感器可用于卡车和货车的称重过程中，以确保货物的准确运输。

在建筑和挖掘行业中，传感器可用于重型机械设备的称重，如挖掘机和装载机等。

此外，轮辐式称重传感器还可以用于公路运输业、工业生产以及农业等领域。

在实际应用中，轮辐式称重传感器还可以与其他设备和系统进行集成。

例如，它可以与计算机、电子秤和数据采集系统等设备连接，以便进行数据传输和处理。

这些集成系统的使用可以提高测量的准确性和效率，并提供更多的功能和选项，如数据存储、远程监控和报告生成等。

总而言之，轮辐式称重传感器是一种用于测量车辆重量的重要装置。

它具有高精度、稳定性、安装方便和耐用可靠的特点，并且在各个行业中都有广泛应用。

对于需要准确测量车辆重量的行业来说，轮辐式称重传感器是不可或缺的工具。

称重传感器的七种类型及常见作用途
1. 拉力传感器：用于测量物体受到的拉力或张力，常见于吊秤、吊索等应用中。

2. 压力传感器：用于测量物体受到的压力，常见于汽车轮胎压力监测、工业流程控制等应用中。

3. 扭矩传感器：用于测量物体受到的扭矩，常见于机械转动部件的力矩测量、电动工具力矩控制等应用中。

4. 声音传感器：用于测量环境中的声音强度或频率，常见于声音监测、语音识别等应用中。

5. 温度传感器：用于测量物体或环境的温度，常见于温度控制、气象监测等应用中。

6. 湿度传感器：用于测量环境中的湿度水分含量，常见于空气调节、农业测量等应用中。

7. 加速度传感器：用于测量物体的加速度或振动，常见于运动追踪、车辆碰撞检测等应用中。

这些传感器的常见作用途可根据具体应用而有所不同，但总体上可以归纳为以下几种：
- 运动监测和控制：例如汽车安全系统中的碰撞检测、运动追踪设备中的姿势检测等。

- 环境监测和控制：例如温度、湿度传感器在空调系统中的温湿度控制、气象监测中的天气数据采集等。

- 力量和负荷测量：例如拉力传感器在吊索、吊秤等应用中的重量测
量、扭矩传感器在机械设备中的力矩测量等。

- 声音和振动检测：例如声音传感器在音频设备中的声音检测、振动传感器在结构安全检测中的振动测量等。

- 流体压力和液位控制：例如压力传感器在液压系统中的压力控制、液位传感器在液体容器中的液位检测等。

- 生物医学应用：例如体温传感器在医疗设备中的体温监测、心率传感器在健康追踪设备中的心率测量等。

RAMSEY传感器、RAMSEY称重传感器、RAMSEY测速传感器、RAMSEY速度传感器、RAMSEY波纹管梁式传感器、RAMSEY探测器、RAMSEY开关、RAMSEY传感器R、AMSEY 探测仪、RAMSEY测量仪、RAMSEY
上海秋腾贸易有限公司低价销售美国RAMSEY传感器、RAMSEY称重传感器、RAMSEY 测速传感器、RAMSEY速度传感器、RAMSEY波纹管梁式传感器。

赛姆RAMSEY系列称重传感器赛姆称重传感器具有精度高、稳定性好、结构形式多、称量范围广等特点。

赛姆称重模块是一种新型的称重元件，可方便地与各种形状的机械装置相联接。

具有称量准确可靠、长期稳定性好、防护等级高等特点。

9310,9320，9330,9340,9355,9355K，9363,9370，PLR9363系列称重传感器。

材料: 合金钢，不锈钢钢
防护等级: IP66/67
精度: 0.03
量程: 250～20000kg应用：料斗秤、平台秤、汽车衡、钢卷秤、钢罐秤、皮带秤、给料机。

称重传感器原理称重传感器是一种用于测量质量或重量的传感器。

它广泛应用于工业、商业和科学领域，如物流、汽车工业、医疗设备等。

称重传感器的原理主要基于物体质量和重力之间的关系。

称重传感器的原理可以分为压阻式、应变式和电磁式三种。

下面将详细介绍这三种原理。

1. 压阻式原理：压阻式称重传感器基于材料压阻效应。

当外力作用于传感器时，其周围的应变体发生变形，从而导致电阻变化。

该传感器通常由硅材料制成，其中包含敏感元件和电桥电路。

外力作用于敏感元件，使其发生变形，从而改变电桥电路中电阻的值，进而测量出物体的重量。

2. 应变式原理：应变式称重传感器基于应变计的原理。

应变计是一种可以测量物体表面应变的传感器。

当物体受到外力作用时，它会产生应变。

应变计将应变转化为电阻变化，通过测量电阻变化来确定重量。

这种传感器通常由弹性材料制成，表面附着应变计。

当物体施加力时，应变计变形，其电阻的值也随之改变。

3. 电磁式原理：电磁式称重传感器基于电磁力的原理。

传感器通过一个悬挂的金属弹簧和一个磁铁组成，当物体放置在传感器上时，物体的重力将弹簧产生位移。

磁铁受到弹簧的位移而移动，从而改变电感器的电感值。

通过测量电感值的变化，可以确定物体的重量。

无论使用哪种原理，称重传感器在使用过程中还需要一些辅助设备，例如放大器和模拟/数字转换器，以便将传感器获得的信号转化为读数或数据输出。

总结起来，称重传感器的原理基于物体质量和重力之间的关系，通过测量电阻、应变或电感值的变化来确定物体的重量。

不论是压阻式、应变式还是电磁式原理，它们都在称重领域起到了至关重要的作用。

SOEMER称重传感器SOEMER称重传感器公司总部位于德国，现在SOEMER称重传感器在德国拥有超过2000人的员工队伍，生产制造高品质的传感器产品。

这些产品已成为加工制造业、控制测量工业以及汽车工业必不可少的基础元件。

在中国设立广州南创传感器事业部，统一负责中国市场，SOEMER称重传感器各种不同类型的传感器及数据处理器满足客户不同需要，并能针对客户要求进行量体式定制。

德国SOEMER称重传感器产品信息汇总型号：SOEMER称重传感器称重传感器220-5/10/20/30/50 tSM60-2/5/10/15/20 tSM61-10/15/20/30/50/100/200 tSM66-100/200/300/500/750/1000SOEMER称重传感器扭矩传感器T120-5/10/20/50/60/100 NMT150-160/200/500/1000/2000/5000/10000/20000/35000/50000NMT157-160/200/500/1000/2000/5000/10000/20000/35000/50000NM1602-0.35/0.70/1.50/3.50/7.00 NM1804-10/20/50/100/200/500/1000 NM1805-10/20/50/100/200/500/1000 NMSOEMER称重传感器应变计NPR QMA FMD VT100SOEMER称重传感器显示器及附件LCS3 i100 QLJ SK SST DT EGA-120 EGA-57E EX-BereichKVD-EX WT 38211 WT 58631 WT 86201 SLMS-70 SLHD-3ZB-Ex KVD - EX RS232 RS485SOEMER称重传感器放大器DAS III LAU 63.1 LAU 73.1 LAC 65.1 LAC 74.1 LDU 68.1LDU 69.1 LDU 78.1SOEMER称重传感器弯曲和剪切梁355-5/10/20/30/50/100/200/250/500 kg3510-300/500/750/1000/1200/2000/3000/5000 kg3410-250/500/1000/2000 kgSM44-227/454/1134/2268/4536 kgSM45-5/10/20/50/100/ kNSOEMER称重传感器安装配件EBH-SF-3510EBH-SFE-3510EBH-SFM-3510EBH-KS-3510-2tEBH-KS-K-3510-5ZKAKS-355BC-355KPE-355GP-355UPSSF-355SM-355ZV-355RB-220SOEMER称重传感器单点称重传感器1022-3/5/7/10/15/20/30/35/50/100/150/200 kg 1040-5/7/10/15/20/30/50/75/100 kg1260-30/50/75/100/150/200/250/300/500/635 kg 1320-1000/1500/2000 kgSOEMER称重传感器不锈钢- 单点称重传感器SM35-50/100/250/500/1000 kgSM36-10/20/50/100/200 kgSOEMER称重传感器平台用微型称重传感器1004-0.3/0.6/1.5/3kg1006-2/3/5kgSOEMER称重传感器S型称重传感器614-50/100/150/200/300/500/750/1000kg615-50/100/150/200/300/500/750/1000kg616-50/100/150/200/300/500/750/1000kg620-500/1000/2000/5000 kgSOEMER称重传感器力传感器F312-1/2/5/10/15/20/50/100 KNF341-1/2/5/10/15/20/50/100 KNF342-200/600/1000/1000/2000/2400 KNF347-200/600/1000/1000/2000/2400 KNM231-5/2,5 KNM231-10/5 KNM231-30/15 KNSM70-20/40/60/100/200/300/400/410/600/720/1000 F148-100KN355系列的弯曲梁称重范围从5公斤到500 KG对仅属于称重技术的绝对经典。

双孔悬臂平行梁应变式称重传感器工作原理下载温馨提示:该文档是我店铺精心编制而成，希望大家下载以后，能够帮助大家解决实际的问题。

文档下载后可定制随意修改，请根据实际需要进行相应的调整和使用，谢谢!并且，本店铺为大家提供各种各样类型的实用资料，如教育随笔、日记赏析、句子摘抄、古诗大全、经典美文、话题作文、工作总结、词语解析、文案摘录、其他资料等等，如想了解不同资料格式和写法，敬请关注!Download tips: This document is carefully compiled by theeditor.I hope that after you download them,they can help yousolve practical problems. The document can be customized andmodified after downloading,please adjust and use it according toactual needs, thank you!In addition, our shop provides you with various types ofpractical materials,such as educational essays, diaryappreciation,sentence excerpts,ancient poems,classic articles,topic composition,work summary,word parsing,copy excerpts,other materials and so on,want to know different data formats andwriting methods,please pay attention!双孔悬臂平行梁应变式称重传感器的工作原理详解在现代科技的快速发展中，传感器技术作为工业自动化和物联网的重要组成部分，扮演着至关重要的角色。

称重模块和称重传感器安装方法
检验规范表格
称重传感器的安装对于最终性能非常重要，应遵循特定的称重传感器安装过程。

梁式称重传感器通过螺栓固定在表面质量需要满足特定要求的稳定底座上。

柱式称重传感器一般需要强化负载接收器，以应对可能的极端压力。

对于料罐秤应用，可能需要起重工具来完成称重模块或称重传感器安装过程。

请观看我们提供的有关用于MultiMount™和PowerMount™安装的起重工具视频。

每类称重传感器都需要一个专用的称重传感器安装指南。

没有通用的梅特勒托利多称重传感器安装指南。

由于这是一个非常复杂的主题，我们建议您在安装称重传感器之前向当地的梅特勒托利多代表咨询，获取针对相关应用的帮助。

他们可提供称重传感器安装技巧和最佳做法，确保精度，并提供适合您的应用的独一无二的称重传感器安装指南。

还有一种方法是使用称重模块，该模块中提供了使用最高精度的简单安装界面。

请观看我们提供的如何快速安装称重模块视频，了解更多信息。

赛摩称重传感器说明书
用途与特点
一端固定，一端加载，密封良好;
受力后自动调心好，安装简单，使用方便，互换性好;
可用于制作各种超薄型电子汽车衡、单轨吊秤、料斗秤等。

量程
50，100，200，300，500kg；1，2，3，5，10，15，20t
悬臂梁称重传感器技术参数
额定载荷0.05～20t
综合精度0.020.03（线性+滞后+重复性）
灵敏度 2.0mV/V
蠕变±0.02％F·S/30min
零点输出±1％F·S
零点温度影响±0.02％F·S/10℃
输出温度影响±0.02％F·S/10℃
工作温度-20℃～+65℃
输入阻抗380±10Ω
输出阻抗350±3Ω
绝缘电阻〉5000MΩ
安全过载150％F·S
供桥电压建议10VDC
材质合金钢或不锈钢
接线方式输入（+）：红线输入（-）：黑线输出（+）：绿线输出（-）：白线
信号放大器接线电源：红公共端：绿输出：黄。

称重传感器的原理及应用来源：赛斯维传感器网发表于 2010-9-7称重传感器的原理及应用随着技术的进步,由称重传感器制作的电子衡器已广泛地应用到各行各业,实现了对物料的快速、准确的称量，特别是随着微处理机的出现，工业生产过程自动化程度化的不断提高，称重传感器已成为过程控制中的一种必需的装置，从以前不能称重的大型罐、料斗等重量计测以及吊车秤、汽车秤等计测控制，到混合分配多种原料的配料系统、生产工艺中的自动检测和粉粒体进料量控制等，都应用了称重传感器，目前，称重传感器几乎运用到了所有的称重领域。

1．高速定量分装系统??? 本系统由微机控制称重传感器的称重和比较，并输出控制信号，执行定值称量，控制外部给料系统的运转，实行自动称量和快速分装的任务。

??? 系统采用MCS-51单片机和V/F电压频率变换器等电子器件，其硬件电路框图如图1所示，用8031作为中央处理器，BCD拔码盘作为定值设定输入器，物料装在料斗里，其重量使传感器弹性体发生变形，输出与重量成正比的电信号，传感器输出信号经放大器放大后，输入V/F转换器进行A/D转换，转换成的频率信号直接送入8031微处理器中，其数字量由微机进行处理。

微机一方面把物重的瞬时数字量送入显示电路，显示出瞬时物重，另一方面则进行称重比较，开启和关闭加料口、放料于箱中等一系列的称重定值控制。

图1 原理框图在整个定值分装控制系统中，称重传感器是影响电子秤测量精度的关键部件，选用GYL-3应变式称重测力传感器。

四片电阻应变片构成全桥桥路，在所加桥压U不变的情况下，传感器输出信号与作用在传感器上的重力和供桥桥压成正比，而且，供桥桥压U的变化直接影响电子称的测量精度，所以要求桥压很稳定。

毫伏级的传感器输出经放大后，变成了0-10V的电压信号输出，送入V/F变换器进行A/D转换，其输出端输出的频率信号加到单片机8031定时器1的计数、输入端T1上。

在微机内部由定时器0作计数定时，定时器0的定时时间由要求的A/D转换分辩率设定。

Hermetically Sealed Single-Ended BeamModel SQB-HCeltronDESCRIPTIONSQB-H(HSS) is a single-ended shear beam load cell designed for multiple cell applications such as low profile platform or small tank scales when used with proper mounting accessories. It is insensitive to side loading and capable of reversed loading. SQB-H(HSS) is constructed of stainless steel and is hermetically sealed to IP68 providing excellent protection against corrosive and washdown environments.FEATURES•Capacities: 1K to 10Klb and 500 to 5000kg •High side-load tolerance •Easy installation•Electroless nickel-plated-alloy tool steel or stainless steel •NTEP III 5000M approval 1K to 10KlbOPTIONAL FEATURES•FM approval available•SQB-H(HSS) hermetically sealed stainless steelAPPLICATIONS•Truck/rail scales•Silo/hopper/tank weighing•Platform scales (multiple load cells)•Pallet truck scales •Packaging machines深圳市现代豪方仪器仪表科技有限公司”Model SQB-HHermetically Sealed Single-Ended BeamCeltronNotes(1)Stainless steel availableAll Specifications subject to change without notice. FM ApprovalIntrinsically Safe: Class I, II, III; Div. 1 Groups A-G Non-Incendive: Class I; Div. 2 Groups A-DSPECIFICATIONSPARAMETERVALUEUNITNTEP/OIML Accuracy class NTEP III Non-ApprovedMaximum no. of intervals (n)3000 single 5000 multiple1000Y = E max /V min100005000Maximum availableStandard capacities (E max )1K, 2K, 2.5K, 3K, 4K, 5KSE, 5K, 10K lbs Standard capacities (E max )500, 1000, 1500, 2000, 5000 kg Rated output-R.O. 3.0mV/VRated output tolerance 0.25±%of rated output Zero balance 1±%of rated output Non linearity 0.0250.030 (SS: 0.05) ±%of rated output Hysteresis 0.0250.030 (SS: 0.05) ±%of rated output Non-repeatability 0.0200.020±%of rated output Creep error (20 minutes) 0.0250.030±%of rated output Zero return (20 minutes) 0.0250.030±%of rated output Temperature effect on min. dead load output 0.00170.0026±%of rated output/°C Temperature effect on sensitivity 0.00100.0015±%of applied load/°CCompensated temperature range -10 to +40°C Operating temperature range -20 to +60°C Safe overload 150% of R.C.Ultimate overload 300% of R.C.Excitation, recommended 10Vdc or Vac rms Excitation, maximum 15Vdc or Vac rmsInput impedance 385±5Ohms Output impedance 350±3Ohms Insulation resistance >5000Mega-OhmsConstruction Nickel plated alloy steel (1)Environmental protectionIP68 深圳市现代豪方仪器仪表科技有限公司”传感器事业部内部资料Disclaimer Legal Disclaimer Notice Vishay Precision GroupAll product specifications and data are subject to change without notice.Vishay Precision Group, Inc., its affiliates, ag ents, and employees, and all persons acting on its or their behalf (collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.Vishay Precision Group disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay Precision Group’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products.No license, express or implied, by estoppel or otherwise, to any intellectual property rig hts is g ranted by this document or by any conduct of Vishay Precision Group.The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for any damag es arising or resulting from such use or sale. Please contact authorized Vishay Precision Group personnel to obtain written terms and conditions regarding products designed for such applications.Product names and markings noted herein may be trademarks of their respective owners.深圳市现代豪方仪器仪表科技有限公司” 传感器事业部内部资料。