mcgsTpc使用U盘更新工程说明书

Actual software supported may vary by motherboard model and OS verison. The software setup menus are for reference only.Unique Features (Z690 Series)BIOS Update Utilities ....................................................................................................21-1 Updating the BIOS with the Q-Flash Utility ...............................................................21-2 Updating the BIOS with the @BIOS Utility ...............................................................51-3 Using Q-Flash Plus ...................................................................................................6APP Center ...................................................................................................................72-1 EasyTune..................................................................................................................92-2 Fast Boot ................................................................................................................102-3 RGB Fusion ............................................................................................................112-4 Smart Backup .........................................................................................................132-5 System Information Viewer .....................................................................................15

USB driver Installation Guide (Win 8 / 8.1) Version 1.0 DediProg Technology 4F,No.7,Lane 143, Xinming Rd., Neihu District, Taipei, Taiwan, 114 DediProg User Manual 06/2015 ©DediProg Technology Co., Ltd 2015 All right reserved. USB Installation Guide

2 This guide can be used in EE100 / EM100Pro / SF100 / SF600 / SF600Plus / ProgMaster and StarProg Series. When the device is connected to a Windows 8.1 PC for the first time, Windows will report that it failed to find a USB driver if they have not been pre-installed. Follow the steps below to manually install the USB driver using the Windows 8.1 Device Manager. 1. Connect your DediProg device to your computer's USB port. 2. Open Device Manager, and the device will be listed under Other devices. USB Installation Guide

3 3. Right-click on the device name* and select Update Driver Software from the pop-up menu. This will launch the Hardware Update Wizard. *The device name under the Other devices will be different depends on your device model name. Device model name Device name in the Device Manager EM100Pro EM100PRO SF600/SF600Plus SF600-ISP SF100 SF100-ISP EE100 DediProg EE100 Programmer ProgMaster-F4/F8/U4/U8 ProgMasterV2 StarProg-F / U / ATE ProgMasterV2 USB Installation Guide

浦科特固态硬盘

-固件更新手册

2

一、 更新前的准备：

硬件连接：

1、请使用SATA数据线连接主板与SSD（请在断电下连接，如主板有sata3接口，请使用此接口连接）如下图。

2、开机后在“设备管理器”中可看到增加一块新磁盘，如下图。

SATA3接口

3

软件准备：

1、本文采用刻录软件是UltraISO 9.3。其它支持“.iso”镜像刻录软件同样适用。

2、请选择我公司提供的新版“.iso”固件镜像文件。

4

3、选中后界面

5

4、请将未写入过的CD/DVD放入光驱中，并点击“”。

6

5、点击“刻录”后如下图。

7

6、刻录完成后光驱会自动弹出，至此软件部分准备完毕。如下图：

注：此光盘内容为：系统引导+固件更新程序。请勿修改此文档内容。

8

二、 更新固件：

1、 重启电脑，将机器中其它硬盘摘除。重新启动电脑，将电脑开机引导设置为“光盘引导模式”。（注：下图只为样例，不同电脑的界面不同）。请选择从光驱引导启动。

光盘引导启动后，程序会自动测试SSD。屏幕提示如下图后，请马上点击“回车”

9

2、 回车后程序自动引导，固件会自动更新。请耐心等待，更新过程很快。

3、 更新完成后的提示。 原始固件版本（未更新的）

更新后固件版本 当前安装SSD型号 当前安装SSD型号

10

三、 备注

1、 请勿用USB等SATA转接设备连接更新固件，会造成更新失败。

2、 如需用笔记本电脑更新固件，请按如上操作制作光盘后，再将SSD安装于笔记本电脑，进行固件更新。

3、 在更新固件前，请您确认固件是否可以支持您手中的SSD，若不确定，请您咨询浦科特公司售后人员。

Jan

20th

, 2022 MPLAB Code Configurator v5.1.1

1

Release Notes for MPLAB®

Code Configurator v5.1.1

1 Core versions bundled with this MCC release

Core v5.4.1

2 What is MPLAB Code Configurator (MCC)

The MPLAB® Code Configurator generates seamless, easy to understand code that is inserted into your

project. It enables, configures, and utilizes a rich set of peripherals and libraries across select devices. It

is integrated into MPLAB® X IDE to provide a very powerful and extremely easy to use development

platform.

3 System Requirements

• MPLAB®

X IDE v6.00 or later

4 Documentation Support

The MPLAB®

Code Configurator v5 User’s Guide may be found on the MPLAB®

Code Configurator page

on the Microchip web site. /mcc

5 Installing MPLAB®

Code Configurator

Basic steps for installing MPLAB®