RJ-091.8SHP中文资料

Extract from the onlinecatalogMVSTBW 2,5/18-ST-5,08Order No.: 1792919The figure shows a 10-position version of the producthttp://eshop.phoenixcontact.de/phoenix/treeViewClick.do?UID=1792919Plug component, nominal current: 12 A, rated voltage: 250 V, pitch: 5.08 mm, no. of positions: 18, type of connection: Screw connectionhttp://Please note that the data givenhere has been taken from theonline catalog. For comprehensiveinformation and data, please referto the user documentation. TheGeneral Terms and Conditions ofUse apply to Internet downloads. Technical dataDimensions / positionsPitch 5.08 mmDimension a86.36 mmNumber of positions18Screw thread M 3Tightening torque, min0.5 NmTechnical dataInsulating material group IRated surge voltage (III/3) 4 kV Rated surge voltage (III/2) 4 kV Rated surge voltage (II/2) 4 kV Rated voltage (III/2)320 V Rated voltage (II/2)630 V Connection in acc. with standard EN-VDE Nominal current I N12 A Nominal voltage U N250 V Nominal cross section 2.5 mm2 Maximum load current12 A Insulating material PA Inflammability class acc. to UL 94V0 Internal cylindrical gage A3 Stripping length7 mmConnection dataConductor cross section solid min.0.2 mm2 Conductor cross section solid max. 2.5 mm2 Conductor cross section stranded min.0.2 mm2 Conductor cross section stranded max. 2.5 mm2 Conductor cross section stranded, with ferrule0.25 mm2 without plastic sleeve min.Conductor cross section stranded, with ferrule2.5 mm2 without plastic sleeve max.Conductor cross section stranded, with ferrule0.25 mm2 with plastic sleeve min.Conductor cross section stranded, with ferrule2.5 mm2 with plastic sleeve max.Conductor cross section AWG/kcmil min.24 Conductor cross section AWG/kcmil max122 conductors with same cross section, solid min.0.2 mm2 2 conductors with same cross section, solid max. 1 mm22 conductors with same cross section, stranded0.2 mm2 min.2 conductors with same cross section, strandedmax.1.5 mm22 conductors with same cross section, stranded,ferrules without plastic sleeve, min.0.25 mm22 conductors with same cross section, stranded,ferrules without plastic sleeve, max.1 mm22 conductors with same cross section, stranded,TWIN ferrules with plastic sleeve, min.0.5 mm22 conductors with same cross section, stranded,TWIN ferrules with plastic sleeve, max.1.5 mm2 Certificates / ApprovalsApproval logoCSANominal voltage U N300 VNominal current I N10 AAWG/kcmil28-12CULNominal voltage U N300 VNominal current I N10 AAWG/kcmil30-12ULNominal voltage U N300 VNominal current I N10 AAWG/kcmil30-12Certification CB, CSA, CUL, GOST, UL, VDE-PZIAccessoriesItem Designation DescriptionMarking1051993B-STIFT Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm0804293SK 5,08/3,8:FORTL.ZAHLEN Marker card, printed horizontally, self-adhesive, 12 identicaldecades marked 1-10, 11-20 etc. up to 91-(99)100, sufficient for120 terminal blocks0805412SK 5,08/3,8:UNBEDRUCKT Marker cards, unprinted, with pitch divisions, self-adhesive, 10-section marker strips, 12 strips per card, can be labeled with theM-PENPlug/Adapter1734634CP-MSTB Coding profile, is inserted into the slot on the plug or invertedheader, red insulating material1734401CR-MSTB Coding section, inserted into the recess in the header or theinverted plug, red insulating materialTools1205053SZS 0,6X3,5Screwdriver, bladed, matches all screw terminal blocks up to 4.0mm² connection cross section, blade: 0.6 x 3.5 mm, without VDEapprovalAdditional productsItem Designation DescriptionGeneral1824007ICC 2,5/18-STZ-5,08Plug component, nominal current: 12 A, rated voltage: 250 V,pitch: 5.08 mm, no. of positions: 18, type of connection: Crimpconnection1762525MDSTB 2,5/18-G1-5,08Header, nominal current: 10 A, rated voltage: 250 V, pitch: 5.08mm, no. of positions: 18, mounting: Soldering1762664MDSTBV 2,5/18-G1-5,08Header, nominal current: 10 A, rated voltage: 250 V, pitch: 5.08mm, no. of positions: 18, mounting: Soldering1770876MSTB 2,5/18-G-5,08-LA Header, nominal current: 12 A, rated voltage: 250 V, pitch: 5.08mm, no. of positions: 18, mounting: Soldering1757404MSTBA 2,5/18-G-5,08Header, nominal current: 12 A, rated voltage: 250 V, pitch: 5.08mm, no. of positions: 18, mounting: Soldering1788884MSTBVK 2,5/18-G-5,08Header, nominal current: 12 A, rated voltage: 320 V, pitch: 5.08mm, no. of positions: 18, mounting: Mounting rail1788693MVSTBU 2,5/18-GB-5,08Header, nominal current: 12 A, rated voltage: 320 V, pitch: 5.08mm, no. of positions: 18, mounting: Direct mounting1769625SMSTB 2,5/18-G-5,08Header, nominal current: 12 A, rated voltage: 250 V, pitch: 5.08mm, no. of positions: 18, mounting: Soldering1767533SMSTBA 2,5/18-G-5,08Header, nominal current: 12 A, rated voltage: 250 V, pitch: 5.08mm, no. of positions: 18, mounting: Soldering3002076UK 3-MVSTB-5,08Modular terminal blocks with plug entry, cross section: 0.2 - 2.5mm², AWG: 26 - 12, width: 5.1 mm, color: gray3002102UK 3-MVSTB-5,08-LA 24RD Modular terminal block with plug entry, nominal current: 12 A,rated voltage: 320 V, pitch: 5.08 mm, no. of positions: 1, mounting:mounting rail, with red light indicator, voltage light indicator: 24 VAC/DC, current light indicator: 3.3 mA3002063UK 3-MVSTB-5,08/EK Modular terminal blocks with plug entry, cross section: 0.2-2.5mm², AWG: 26-12, width: 5.1 mm, color: blue3002131UK 3D-MSTBV-5,08Modular terminal blocks with vertical plug entry, cross section: 0.2- 2.5 mm, AWG: 30 - 12, width: 5.1 mm, color: gray3002144UK 3D-MSTBV-5,08-LA 24RD Modular terminal block with vertical plug entry, color: Gray, withred light indicator, voltage light indicator: 24 V AC/DC, current lightindicator: 3.3 mA3002173UK 3D-MSTBV-5,08/EK Modular terminal blocks with plug entry, cross section: 0.2 - 2.5mm², AWG: 30 - 12, width: 5.1 mm, color: blue1788279UMSTBVK 2,5/18-G-5,08Header, nominal current: 12 A, rated voltage: 320 V, pitch: 5.08mm, no. of positions: 18, mounting: Mounting railDrawingsDimensioned drawingAddressPHOENIX CONTACT GmbH & Co. KGFlachsmarktstr. 832825 Blomberg,GermanyPhone +49 5235 3 00Fax +49 5235 3 41200http://www.phoenixcontact.de© 2008 Phoenix ContactTechnical modifications reserved;。

This document was generated on 08/07/2012PLEASE CHECK FOR LATEST PART INFORMATIONPart Number:91716-1515Status:ActiveOverview:RAST 2.5 Connector SystemDescription:2.50mm Appli-Mate RAST 2.5 IDT Housing, Direct/Indirect, Female, 6 Circuits,Polarizing Rib Between Circuits 2 & 3Documents:3D ModelApplication Specification AS-99033-0008 (PDF)Drawing (PDF)Packaging Specification PK-90871-001 (PDF)Product Specification PS-99020-0040 (PDF)RoHS Certificate of Compliance (PDF)Agency CertificationCSA LR19980ULE29179GeneralProduct Family IDT and Solder Connectors Series91716Crimp Quality Equipment YesOverviewRAST 2.5 Connector System Product Name RAST 2.5UPC 822348367955Use WithRAST standard interface PhysicalCircuits (Loaded)4Circuits (maximum)4Color - ResinNatural (White)Durability (mating cycles max)10Flammability 94V-0GenderFemale Glow-Wire Compliant No Lock to Mating Part NoneMaterial - MetalPhosphor Bronze Material - Plating MatingTin Material - Plating Termination Tin Material - Resin Nylon Net Weight1.399/g Number of Rows 1Packaging Type Tray Panel MountNoPitch - Mating Interface2.50mm Pitch - Termination Interface 2.50mm Plating min - Mating1.016µm Plating min - Termination 1.016µm Polarized to Mating Part Yes StackableNoTemperature Range - Operating -20°C to +85°C Termination Interface: Style IDT or Pierce Wire Size AWG22, 24ElectricalCurrent - Maximum per Contact 2A, 4A Voltage - Maximum32V ACMaterial InfoSeriesimage - Reference onlyEU RoHSChina RoHSELV and RoHS Compliant REACH SVHCContains SVHC: No Low-Halogen Status Not ReviewedNeed more information on product environmental compliance?Email productcompliance@For a multiple part number RoHS Certificate of Compliance, click herePlease visit the Contact Us section for any non-product compliance questions.Search Parts in this Series 91716SeriesMates WithAppli-Mate RAST 2.5 Header 90861 , 90860Application Tooling | FAQTooling specifications and manuals are found by selecting the products below.Crimp Height Specifications are then contained in the Application Tooling Specification document.GlobalDescription Product #RAST 2.5 Semi-AutomaticTerminator Machine0623006200Reference - Drawing NumbersApplication Specification AS-99033-0008Packaging Specification PK-90871-001Product Specification PS-99020-0040Sales Drawing SD-91716-001This document was generated on 08/07/2012PLEASE CHECK FOR LATEST PART INFORMATION分销商库存信息: MOLEX 0917161515。

10 A 28-12
300 V 10 A 30-12
300 V 10 A 30-12 CSA, CUL, UL
PHOENIX CONTACT GmbH & Co. KG http://www.phoenixcontact.de
Page 2 / 3 Mar 8, 2008
元器件交易网
SMSTB 2,5/ 6-STF Order No.: 1970919
http://eshop.phoenixcontact.k.do?UID=1970919
Address
PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8 32825 Blomberg,Germany Phone +49 5235 3 00 Fax +49 5235 3 41200 http://www.phoenixcontact.de
© 2008 Phoenix Contact Technical modifications reserved;
PHOENIX CONTACT GmbH & Co. KG http://www.phoenixcontact.de
Page 3 / 3 Mar 8, 2008
Certificates / Approvals
Approval logo
CSA Nominal voltage UN 300 V
PHOENIX CONTACT GmbH & Co. KG http://www.phoenixcontact.de
Page 1 / 3 Mar 8, 2008
元器件交易网
元器件交易网
Extract from the online catalog

Catch Us on the Web! E-Mail us: sales@54RI-60 SeriesRI-60 S ERIESUltra-miniature dry-reed switch hermetically sealed in a gas-filled glass envelope. Single-pole, single-throw (SPST) type, having normally open contacts, and containing two magnetically actuated reeds.The switch is of the double-ended type and may be actuated by an electromagnet, a permanent magnet or a combination of both.The device is intended for use in relays, sensors, pulse counters or similar devices.RI-60 S ERIES F EA EATURES TURES u Ideal for ATE switchingu Contact layers: Gold, sputtered rutheniumu Superior glass-to-metal seal and blade alignment u Excellent life expectancy and reliabilityG ENERAL DATA FOR ALL MODELS RI-60A T -Customiza -Customization / Pr tion / Pr tion / Pref ef efor or ormed Leadsmed Leads Besides the standard models, customized products can also be supplied offering the following options:! Operate and release ranges to customer specification ! Cropped and/or preformed leadsC OILSAll characteristics are measured using the Philips stan-dard coil. For definitions of the Philips Standard Coil and the standard MIL Coil, refer to “Application Notes” in the Reed Switch Technical & Application Information Section of this catalog.Rela Relationship betw tionship betw tionship between Philips Standar een Philips Standar een Philips Standard Coil and the d Coil and the Standar Standard MIL Coild MIL Coil Operate value of standard MIL Coil = 0.83 x operate value of Philips Sandard Coil + 0.30 AT.Release value of standard MIL Coil = 0.83 x release value of Philips Standard Coil + 0.18 AT.L IFE EXPECT EXPECTANCYANCY AND RELIABILITY The life expectancy data given below are valid for a coil energized at 1.25 times the published maximum operate value for each type in the RI-60 series.No-load conditions (oper No-load conditions (opera a ting fr ting frequenc equenc equency:y:y: 100 Hz) 100 Hz)Life expectancy: min.109 operations with a failure rate of less than 2 x10-10 with a confidence level of 90%.End of life criteria:Contact resistance > 1Ω after 2 msRelease time > 2ms (latching or contact sticking).Loaded conditions (r Loaded conditions (resisti esisti esistiv v e load:e load: 55 5 V V ; 100 mA;oper opera a ting fr ting frequenc equenc equency:y:y: 125 Hz) 125 Hz)Life expectancy: min. 2 x 107operations with a failure rate of less than 10-8 with a confidence level of 90%.End of life criteria:Contact resistance > 1Ω after 2.5 msRelease time > 1 ms (latching or contact sticking).Loaded conditions (r Loaded conditions (resisti esisti esistiv v e load:e load: 20 20 20 V V ; 500 mA;oper opera a ting fr ting frequenc equenc equency:y:y: 125 Hz) 125 Hz)Life expectancy: min. 2 x 107 operations with a failure rate of < 10-8 with a confidence level of 90%.Dimensions in inches (mm)55Catch Us on the Web! E-Mail us: sales@ End of life criteria:Contact resistance > 2Ω after 2.5 msRelease time > 2.5 ms (latching or contact sticking).Switching different loads involves different life expect-ancy and reliability data. Further information is available on request.M ECHANICAL D A T AContact arrangement is normally open; lead finish is tinned; net mass is approximately 0.09 g; and can be mounted in any position.S HOCKThe switches are tested in accordance with “IEC 68-2-27”, test Ea (peak acceleration 100 G, half sinewave;duration 11 ms). Such a shock will not cause an open switch (no magnetic field present) to close.M ECHANICAL S TRENGTHThe robustness of the terminations is tested in accordance with “IEC 68-2-21”, test Ua 1 (load 10 N).O PERA PERATING TING AND S T ORA ORAGE GE T EMPERA EMPERATURETURE Operating ambient temperature; min: -55°C;max: +125°C.Storage temperature; min: -55°C; max: +125°C.Note:Note: Temperature excursions up to 150°C may be permissible. For more information contact your nearest Coto Technology sales office.S OLDERINGThe switch can withstand soldering heat in accordance with “IEC 68-2-20”, test Tb, method 1B: solder bath at 350 ±10° C for 3.5 ±0.5 s.Solderability is tested in accordance with “IEC 68-2-20”test Ta, method 3: solder globule temperature 235°C;ageing 1b: 4 hours steam.W ELDINGThe leads can be welded.M OUNTINGThe leads should not be bent closer than 1 mm to the glass-to-metal seals. Stress on the seals should be avoided. Care must be taken to prevent stray magnetic fields from influencing the operating and measuring conditions.RI-60 SeriesModel Number RI-60ParametersTest Conditions Units。