SL102R005中文资料

Rev 1.4, May 25, 2007 Page 1 of 11

2200 Laurelwood Road, Santa Clara, CA 95054 Tel: (408) 855-0555 Fax: (408) 855-0550 SL2305󰁿Low Jitter and Skew 10 to 140 MHz Zero Delay Buffer (ZDB)Key Features

x 10 to 140 MHz operating frequency range x Low output clock jitter: 󰁿 45 ps-typ cycle-to-cycle jitter x Low output-to-output skew: 50 ps-typ x Low product-to-product skew: 125 ps-typ x 3.3 V power supply range x Low power dissipation: 󰁿 26 mA-maxat 66 MHz 󰁿 42 mA-max at 140 MHz x One input drives 5 outputs organized as 4+1 x SpreadThru™ PLL that allows use of SSCG x Standard and High-Drive options x Available in 8-pin SOIC and TSSOP packages x Available in Commercial and Industrial grades

Applications

x Printers and MFPs x Digital Copiers x PCs and Work Stations x DTV x Routers, Switchers and Servers x Digital Embeded Systems Description

©2005 Fairchild Semiconductor

Rev.1.0.5

Features

•Internal Avalanche Rugged Sense FET

•Advanced Burst-Mode operation consumes under 1 W at

240VAC & 0.5W load

•Precision Fixed Operating Frequency (66kHz)

•Internal Start-up Circuit

•Pulse by Pulse Current Limiting

•Abnormal Over Current Protection (AOCP)

•Over Voltage Protection (OVP)

•Over Load Protection (OLP)

•Internal Thermal Shutdown Function (TSD)

•Auto-Restart Mode

•Under Voltage Lock Out (UVLO) with hysteresis

•Low Operating Current (2.5mA)

•Built-in Soft Start

Application

•SMPS for LCD monitor and STB

•Adaptor

Description

The FSDM0565R is an integrated Pulse Width Modulator

(PWM) and Sense FET specifically designed for high

performance offline Switch Mode Power Supplies (SMPS)

with minimal external components. This device is an

integrated high voltage power switching regulator which

80Semiconductor Fuses150/250/500/600/700 VACsVery Fast-Actings1 – 1000 Amperes

Designed to protect today’s equipment and systems,Littelfuse semiconductor fuses are manufactured withLittelfuse-developed technology that sets tomorrow’s stan-dards for accuracy, consistent quality, reliability, and predict-able performance.By using advanced metallurgical, polymer,and materials research;mathematical modeling, and comput-erized statistical analysis;Littelfuse engineers have redefined“State-of-the-Art.”APPLICATIONSDesigned specifically for supplementary protection of semiconducting devices such as silicon controlled rectifiers(SCR’s), diodes, thyristors, triacs, transistors, and similarsolid-state devices.These devices are used in power equipment including variable speed drives, power rectifiers,UPS systems, DC power supplies, and in a wide range ofelectronic equipment.May be used wherever extremely fast-acting, current-limitingfuses with no time delay are required.SPECIFICATIONSVoltage Ratings:L15S:150 V AC/DC (1 – 60A)150 VAC (70 – 1000A)100 VDC (70 – 1000A)L25S:250 V AC/DC (1 – 200A)250 VAC (225 – 800A)200 VDC (225 – 800A)L50S:500 VAC/450VDCL60S:600 VACKLC:600 VACL70S:700VAC/650VDCInterrupting Rating:AC:200,000 rms amperes (L15S series 100,000 amperes)DC:20,000 amperesAmpere Range:1 – 1000 amperesSee Rating Table for ratings available in each series.Approvals:UL Recognized under the Components Programand CSA Recognized under the ComponentAcceptance Program.UL File No:E71611CSA File No:LR29862L15S and L25S series fuses are LittelfuseCertified for DC ratings shown in Rating Table.AMPERE RATINGSSee Rating Table.RECOMMENDED FUSE BLOCKSLSCR series:Refer to Fuse Block section of this catalog foradditional information.SAFETYs200,000 A.I.R.— Reliable interruption of all overcurrents upto 200,000 amperes ...meets present and future systemrequirements.(Note:L15S series has 100,000 A.I.R.)sExtremely Current Limiting — Low I2t and peak let-throughcurrents meet most semiconductor requirements.sUL Recognized — Littelfuse semiconductor fuses are recognized under the components program of UnderwritersLaboratories, Inc., and carry the mark.UL Recognizedsemiconductor fuses may be used to provide supplemen-tary protection in UL listed equipment.LONGER EQUIPMENT LIFEsLow Watt Losses — Means less heating and power consumption in circuit.sControlled Transient Overvoltages — All circuits are subjectto transient overvoltages during fault current interruption.These transient overvoltages (arc voltages) start when fuselinks melt or circuit breaker contacts part, and subsidewhen circuit is interrupted.Semiconductors are very sensitive to overvoltages.Littelfuse semiconductor fusedesigns keep transient overvoltages to low levels and helpreduce semiconductor failure.元器件交易网

SUM SERIES

Single Output / Multiple Outputs, Universal InputSwitch Mode Power Supplies

Features:

• Cost-effective power source

• Universal input

• Single and multiple outputs

• Built-in EMI filter

• Meets UL, CSA and VDE safety approvals

• Meets FCC Class B, VDE 0871 Class B

Sanken/Allegro 3100 Tower Blvd. 5th Fl. University Tower, Durham, NC27707 Phone: (888)888-4914 Fax: (919)402-8540E-mail: allegro@

Rating

5 W

10 W

SDA005-05SDA005-12SDA010-05SDA010-12Rating15 W (2 Channels)

ItemConditionsSUM015-01

Rated Input VoltageAC115V / 230V

Input Voltage RangeAC90~135V / 180~270V

Input CurrentRated input/output conditions0.5A / 0.3A

Inrush Current20A / 40A

Rated Frequency Range50/60Hz (Frequency Range 45~65Hz)

Power FactorN/A

Harmonic AttenuatorN/AInput

Efficiency(typ)Rated input/output conditions65%

Rated Output Voltage+5V+12V