汽车门锁[1]

Door OperationUse several methods to lock or unlock the doors. n Using the Lock TabTo unlock: When you unlock either front door using the lock tab, the specificdoor (driver’s or passenger’s) unlocks.To lock: When you lock the door usingthe lock tab on the driver’s door, all theother doors and the trunk lock at thesame time. When you lock the doorusing the lock tab on the frontpassenger’s door, only that door locks. nUsing the Front Door Inner Handle VEHICLE CONTROLSPull the front door inner handle. The door unlocks and opens in one motion.Unlocking and opening the driver’s door from the inner handle unlocks all other doors, fuel fill door, and trunk.Do not pull a front door inner handle while the vehicle is moving.n Using the Master Door Lock SwitchTo unlock: Press the unlock side of the switch to unlock all doors, fuel fill door and the trunk.To lock: Press the lock side of the switch to lock all doors, fuel fill door and the trunk.n Childproof Door LocksThe childproof door locks prevent the rear doors from being opened from the inside regardless of the position of the lock tab.Slide the lever in the rear door to the lock position, and close the door.Open the door using the outer door handle.Note: To open the door from the inside when the childproof door lock is on, put the lock tab in the unlock position,lower the rear window, put your hand out of the window, and pull theoutside door handle.VEHICLE CONTROLSn Using the Trunk OpenerPress and hold the trunk opener button on the driver's door to unlock and openthe trunk. VEHICLE CONTROLS。

汽车电动车门锁工作原理首先，电源系统是提供电能给电动车门锁的主要部分。

在汽车电气系统中，通常使用12V的电源系统。

该电源系统可以是汽车的蓄电池，也可以是通过发动机发电机产生的电能。

蓄电池通过电压稳定器将电源电压稳定在12V，以保证电动车门锁正常工作。

其次，控制电路是负责控制电动车门锁的开关操作的部分。

控制电路的主要组成部分包括控制单元、传感器、继电器等。

控制单元是电动车门锁开关信号的处理中心，它接收来自车内或车外的开关信号，并通过传感器检测车门的状态，以确定是否可以进行开锁或上锁操作。

一旦控制单元接收到相应的开关信号并确定可以进行操作，它将通过继电器控制电流的通断，以实现电动车门锁的开锁或上锁动作。

第三，电动驱动装置是将控制电路发出的信号转化为实际的开锁或上锁动作的部分。

电动驱动装置可以是直流电动机或电磁继电器。

直流电动机通过电源提供的电能驱动车门锁的开关，而电磁继电器则通过将控制电路发出的信号转化为电磁力来实现开锁或上锁动作。

最后，车门锁是实际进行开锁或上锁操作的部分。

车门锁通常由一个电磁锁和一个闭锁机构组成。

当控制电路发出开锁信号时，电磁锁会受到电磁力的作用而打开，从而解除车门的锁定状态。

而当控制电路发出上锁信号时，电磁锁不受电磁力作用，车门锁将保持锁定状态。

闭锁机构在车门上锁时会将车门锁定在车身上，以确保车门的安全。

总结起来，汽车电动车门锁的工作原理主要包括电源系统、控制电路、电动驱动装置和车门锁等部分。

电源系统提供电能，控制电路接收并处理开关信号，电动驱动装置将信号转化为实际的开锁或上锁动作，而车门锁则实际进行开锁或上锁操作。

这些部分共同协作，使得汽车电动车门锁可以实现远程、便捷的锁定或解锁车门的功能。

Door OperationThere are a few different ways of unlocking the doors from inside the vehicle.n Using the Lock TabTo unlock: Pull the lock tab rearward.When you unlock either front doorusing the lock tab, the specific door(driver’s or passenger’s) unlocks.To lock: Push the lock tab forward.When you lock the door using the locktab on the driver’s door, all the otherdoors and the trunk lock at the sametime. When you lock the door usingthe lock tab on the front passenger’s door, only that door locks.n Using the Front Door Inner HandlePull the front door inner handle. Thedoor unlocks and opens in one motion.Unlocking and opening the driver’sdoor from the inner handle unlocks allother doors.Do not pull a front door inner handlewhile the vehicle is moving.n Using the Master Door Lock SwitchTo unlock: Press the unlock side of theswitch to unlock all doors and thetrunk.To lock: Press the lock side of theswitch to lock all doors.VEHICLE CONTROLSn Childproof Door LocksThe childproof door locks prevent therear doors from being opened from theinside regardless of the position of thelock tab.Slide the lever in the rear door to thelock position, and close the door.Open the door using the outer doorhandle.Note: To open the door from the insidewhen the childproof door lock is on, put the lock tab in the unlock position,lower the rear window, put your hand out of the window, and pull the outside door handle.Using the Trunk OpenerPull up on the lever on the lower left of thedriver's seat to unlock and open the trunk.VEHICLE CONTROLS。