当前位置：文档之家 › 遥控定时器使用指南 - 英文版

遥控定时器使用指南 - 英文版

  • 格式：doc
  • 大小：5.80 MB
  • 文档页数：4

Remote Timer User Guide

1.Remote

The remote with the lamp is a infrared remote .Please keep it face

to the lamp when you use it.

Remote control in case of sufficient power, the effective distance

(unobstructed straight line distance) 15 meter.

Key features are as follows:

The shape of the remote was designed with the best width and thickness,to

get the best grip. High grade silicone rubber buttons,make sure that press

comfortably.Reasonable arrangement of buttons for easier use.

A+ / A- : channel 1 ON/OFF B+ / B- : channel 2 ON/OFF C+ / C- : channel 3 ON/OFF

+10/-10: adjust by 10 ▲ ▼ ◀ ▶ : up \down\left\right navigation keys

OK : ENTER ID : MENU TIMER :timer set TIME:time adjust

2.Timer enable / disable

Default interface:

Press “MODE” enable or cancel the timer. When the clock icon

display ,it means the timer was enabled.Conversely,it means the

timer was disabled. 3.Time adjustment

Press“TIME” enter the time adjustment interface.

Press “◀” or “▶” select to adjust hour or minute.

Press “▲” or “▼” increase or decrease.

When adjusted,press “ENTER” to save and exit.

4.Timer set

Press “TIMER” enter the timer setting interface.

Press “◀”or “▶” select the channel which need to set, then press

"ENTER" to enter the timer parameter settings.

Press“◀” or “▶”select to adjust hour or minute.Press “▲” or “▼”

increase or decrease.

When the time run to the timing point and the timer mode was

enabled, the lamp will automatically turn off or turn on .Each

channel can be set with four timing points,and the other two

channels setting similar to the above.

5.Advanced menu

Press “MENU” to enter the advanced features menu,it contains Channels renamed,backlight control,software version and factory

reset.

Press “▲” or “▼” to select，press “ENTER” to enter the option.

Channels renamed：

Channel renamed can make sure that their names matched the

LED color.

按“◀或▶”选择，按“▲或▼”调整

Backlight control:

You can set the backlight time of 0-60 seconds and always on.

Press “▲” or “▼” to set.

When adjusted to 60 seconds, continue to increase will display

“∞” and the backlight will always on.

When the backlight off,press“ENTER”can wake up the

Backlight.

Software version:

Software version records the system update.

Factory reset：

Press“◀” or “▶” to select “YES” or “NO”,when “YES”

press “ENTER” to reset.

If factory reset ,timing parameters to zero,backlight time is

30S,channels'name are Red ,Green,Blue.

合集下载

NOVATEK-ELECTRO LTD 双通道电子时延遥控器 REV-201M 用户手册说明书

NOVATEK-ELECTRO LTD 双通道电子时延遥控器 REV-201M 用户手册说明书

NOVATEK-ELECTRO LTD

Research-and-Manufacture Company

MULTIFUNCTIONAL

TWO-CHANNEL

TIME DELAY RELAY

REV-201М

USERS MANUAL

- 2 -This present manual contains necessary information about application, main operation principles and

adjustment setting for the two-channel electronic time delay relay REV-201M (hereinafter REV-201М).

1 GENERAL DESCRIPTION AND OPERATION

1.1 APPLICATION

REV-201M is designed for the commutation of electrical circuits of 240V 50Hz AC as well as 24 – 100V DC

electrical circuits with the adjustable time delay setting.

REV-201M contains 2 channels – each of them may work in 4 user preset algorithms:

-Turn ON time delay relay;

-Impulse relay;

-Cyclic relay for the periodic events;

-Operation relay *.

_________

* REV-201M could be used as the relay of pre-starting signalization for the machinery that require to

定时器操作使用说明书

定时器操作使用说明书

定时器操作使用说明书（总

2页）

本页仅作为文档封面，使用时可以删除 This document is for reference only-rar21 year.March 步骤 按键

按（手动） 按（校星期）

按（校时）（校分） 设左项目

使显示器的短横线在自动位巻

结束时间设左 定时器使用说明书

一. 功能键说明

校星期一一调整星期 校时一一调整小时 校分一一调整分钟

定 时一一设置定时开关键 时钟一一设置正常时间 复位一一清除所有

设置

取消/恢复一一只起到清除定时设置不动作的功能，指删除1-14组中所设置的 任一组（一组包括开和关，例：第二组设置为：U: 02开、11: 03关，如果清 除11：

02,同时也会将11： 03清除，恢复刚才清除，再按一下清除键即可， 恢复后这一组定时会执行动作）

自动/手动一一切换接通状态：ON为常开；AUTO为自动；即定时设定起作 用；OFF为常关

二、 定时操作说明

鲁复第2-第6步设立第2J6次开关的时间

按（时钟）

【举例】例如控制器每天下午6点自动打开电源，到夜里2点关闭电源，按以 下操作：

按一下“定时键”显示器上显示如图1（表示当前定时器没有定时计划） 按住“校时”“校分”显示器显示如图2。

再按一下“设时键”显示器显示如图3。

按住“校时”“校分”显示器显示如图4。

以上调整完再按一下“时钟键”

注意：定时操作完成后，不要忘记按“自动/手动”键把接通状态设成AUTO状 态。

長■ 白砂 黄

（图1） （图2〉

MO TU IE TH FR SA £U

（图3> （图4》

操作指南英文版

操作指南英文版

操作指南英文版

Operating an electronic device or appliance can often be a daunting

task especially when the instructions are not clear or easy to

understand This is where a well-written set of operating instructions

in English can make all the difference Providing clear step-by-step

guidance with accompanying visuals can help users successfully set

up and use a product without frustration or confusion An effective

set of operating instructions should be concise yet comprehensive

covering all the essential information needed to operate the device

properly

To begin the process of creating operating instructions in English the

first step is to thoroughly understand the product itself This means

having a deep knowledge of how the device functions its various

features and capabilities as well as any potential safety

Elkay 350A-1 主推钮和触摸定时器 适用指南说明书

Elkay 350A-1 主推钮和触摸定时器 适用指南说明书

350A-1

Master push button and touch timer

Fitting and operating instructions – Two wire (Lin-Lout). For lighting onlyInstruction Data | 350A-1 | 360A-1 | 550A-3 | 560A-3

Features

Time Delay: 2min-2hr

Voltage: 240Va.c. 50Hz

Load Rating & Type: 16A for all lighting loads that are LED,

Compact Fluorescent and Fluorescent, Incandescent and

Resistive.

(This Push button and touch timer cannot be used on contactors.

Please use Elkay three wire Master timers

and sensors)

The pushbutton/touch timers are part of the Elkay family of

switches, timers and detectors which save energy and increase

convenience in and around your home, garden or premises.

Usage

The push button/touch timers are general purpose time controls.

Applications for suitable use include lighting and fans with

lighting.The timers can be used independently or as a master unit