DS-3200III+操作手册

Technical support: ******************

P1 DS-2200 Series Quick Start V1.0, Jul. 2020 What’s in the box? Related Information The package includes the following items: DS-2200 Series Module x 1 Quick Start x1 (This Document) DS Series Product Page: /en/product/guide+Industrial__Communication+Serial__Communication+Serial-to-Ethernet__Device__Server#1189 Documentation & Firmware: /en/download/index.php?model=DS-2215i NS-205/NS-205PSE Product Page (optional): https:///en/product/guide+Industrial__Communication+Ethernet__Communication+Ethernet__Switch#792 Technical support: ****************** P2 1 Connecting the Power and Host PC 1) Make sure your PC has workable network settings. Disable or well configure your Windows firewall and Anti-Virus firewall first, else the “Search Servers” on Chapter 4 may not work. (Please contact with your system Administrator) 2) Connect both the DS-2200 and your PC to the same sub network or the same Ethernet switch. 3) Supply power (PoE or +12~+48 VDC) to the DS-2000. Note : Please use the first RJ-45 jack (ETH1) to connect the PoE Switch when using the PoE to power.The second RJ-45 jack (ETH2) doesn’t support the PoE function Technical support: ****************** P3 2 Self-Test Wiring Wiring Notes for RS-232/485/422 Interfaces: : Here, the RS-232 and RS-485 wiring is used as an example.  RS-232 Wiring  RS-422 Wiring  RS-485 Wiring While using RS-485 modules, you can not wire the Data+ with Data- signals for self-test. But you can test two RS-485 ports by wiring the Data1+ with Data2+ signals, and wiring the Data1- with Data2- signals. Then send data to one and receive data from another. RxD TxD TxD RxD GND GND RTS CTS CTS RTS TxD+ RxD+ TxD- RxD- RxD+ TxD+ RxD- TxD- GND GND Data+ Data+ Data- Data- GND GND Technical support: ****************** P4 3 Installing Software on Your PC Install VxComm Utility, which can be obtained from the web site: https:///en/download/index.php?nation=US&kind1=&model=&kw=vxcomm 4 Configuring Network Settings 1) Double-click the VxComm Utility shortcut on the desktop. 2) Click the “Search Servers” to search your DS-2200. 3) Double-click the name of DS-2200 to open the “Configure Server (UDP)” dialog box. Factory Default Settings of DS-2200: IP Address 192.168.255.1 Subnet Mask 255.255.0.0 Gateway 192.168.0.1    Technical support: ****************** P5 4) Contact your Network Administrator to obtain a correct network configuration (such as IP/Mask/Gateway). Enter the network settings and click “OK”. Note: The DS-2200 will use the new settings 2 seconds later. 5 Configuring Virtual COM Ports 1) Wait 2 seconds and click “Search Servers” button again to ensure the DS-2200 is working well with new configuration. 2) Click the name of DS-2200 to select it.    Technical support: ****************** P6 3) Click the “Add Server[S]” button. 4) Assign a COM Port number and click “OK” to save your settings. 5) Click on DS-2200 name and check the virtual COM Port mappings on the PC.    Technical support: ****************** P7 6) Click the “Restart Driver” item in the “Tools” menu to display the “VxComm Utility: Restarting Driver” dialog box. 7) Click the “Restart Driver” button. 6 Self-Test 1) Right click Port1 and then choose the “Open COM Port” item. 2) Check that the configuration of the COM Port is correct and then click the “Open COM” button.     Technical support: ****************** P8 3) Type a string in the “Send” field. 4) Click the “Hex/Text” option in the “Display” section. 5) Click the “Send” button to send the message. 6) If a response is received, it will be displayed in the received field.    

DS-7200HV-ST系列快速操作指南

DS-7200HV-ST系列快速操作指南

1、系统概述

1.1 选择频道

您可以通过单击屏幕下方的频道选项卡来选择不同的频道。每个频道都有相应的图标和描述。

1.2 布局选择

您可以通过布局选项卡来选择不同的布局方式。每种布局都有不同数量的画面显示区域和排列方式。

1.3 主控制选项

主控制选项包括融合布局、图像调整、音量控制、亮度调整等功能。您可以通过屏幕上的控制按钮进行调整。

2、录像操作

2.1 开始录像

您可以通过屏幕下方的录像按钮来开始录制当前画面。录像文件将保存到系统的硬盘中。

2.2 停止录像 您可以通过再次屏幕下方的录像按钮来停止当前的录像操作。

2.3 播放录像

您可以通过录像文件列表中的某个文件来开始播放录像。您还可以使用播放控制按钮进行快进、快退、暂停等操作。

3、报警管理

3.1 报警设置

您可以通过进入设置菜单来进行报警参数的设置，包括报警类型、触发条件、报警输出等。

3.2 报警触发

当系统检测到报警触发条件时，会自动触发相应的报警输出和录像操作。您可以在录像文件列表中找到相应的录像文件。

3.3 报警输出

报警输出可以通过设置菜单中的报警输出选项来进行配置。您可以设置报警设备的开关状态及灵敏度等参数。

4、远程访问

4.1 网络设置 您可以通过进入设置菜单来配置网络参数，包括IP地质、子网掩码、网关等。确保网络参数正确设置后，您可以通过局域网或互联网访问系统。

4.2 远程查看

您可以通过安装相应的客户端软件来远程查看系统的实时画面。您还可以进行远程回放、云存储等操作。

4.3 远程控制

除了查看画面，您还可以通过客户端软件进行远程控制，包括布局切换、录像控制、云台控制等。

5、音频操作

5.1 音频输入

系统支持多种音频输入方式，包括麦克风、音频输入端口等。您可以通过设置菜单来配置音频输入参数。

5.2 音频输出

您可以通过设置菜单来配置音频输出参数，包括音量调整、音频输出端口选择等。

管理机+门口机+室内机配置（半数字）

操作手册

目 录

一、 操作流程（配置流程） ............................ 1

二、 操作步骤（配置步骤） ............................ 1

三、 适用型号 ........................................ 7

四、 变更记录 ........................................ 7

五、 关于海康威视 .................................... 1

一、 操作流程（配置流程）

1) 管理机配置

2) 门口机配置

3) 室内机配置

二、 操作步骤（配置步骤）

1. 配置管理机对应参数

远程配置-对讲-编号配置

图1：管理机编号配置

远程配置-网络-本地网络配置

图2：本机网络配置

远程配置-网络-关联网络配置（若使用管理机作为SIP服务器，则在管理机本机设备管理，添加SIP服务器并将其IP填写为管理机IP；若使用平台按平台要求填写）

图3：关联网络配置

2. 门口机配置

远程配置-对讲-编号配置（门口机编号0代表主门口机，1/2/3…代表从门口机）

图4：编号配置

远程配置-网络-本地网络配置

图4：本地网络参数配置

远程配置-网络-关联网络配置（填写对应管理机IP，以及配置的SIP服务器地址，若使用平台则按平台要求填写。）

3. 室内机配置 图5：关联网络参数配置

室内机连接到解码器，只需要连接网线。

三、 适用型号

（如果适用型号较多可以不需要有描述直接横向把所有型号列上）

型号 描述

DS-KM8301 管理机

DS-KD3002-2 门口机

DS-KH3000 室内机

DS-KH3200 室内机

四、 变更记录

版本更日期 主要变更内容

v1.0 build20160608 建立文档

1

•With new super sensitive 1/2” and 1/3” sensor EXview HAD CCD TM•PAL: 752 (h) x 582 (v) pixels. NTSC: 768 (h) x 494 (v) pixels•Improved sensitivity and image performance•Based on latest Digital Signal Processing (DSP)•VBS and Y/C video output•Extended sensitivity with integration for low light applications•Automatic shift from shutter to integration for wider light range•Output for video controlled and direct drive iris•On-screen menu control with push buttons on rear•Horizontal scan reversal (mirror image) and Y/C reversal•Back light compensation with selectable patterns•RS 232C interface/Windows 95/98/NT setup softwareSuper Sensitive DSP Color CameraCV-S3200/S3300 SERIES

SerialInterface

ControlToolrsc232

The leading manufacturer of high performance camera solutions

Lens connectorFemale

Pin1+9 V/-Damp2NC/ +Damp3Video/+Drive4GND/-DriveScanning system625 lines525 lines25 frames/sec.30 frames/sec.2:1 interlaced2:1 interlacedCCD sensorColor 1/2” and 1/3” IT EXview HAD CCD™Sensing area1/2" (CV-S3200)6.6 (h) x 4.8 (v) mm1/3" (CV-S3300)4.9 (h) x 3.7 (v) mmEffective pixels752 (h) x 582 (v)768 (h) x 494 (v)Cell size1/2" (CV-S3200)8.6 (h) x 8.3 (v) µm8.4 (h) x 9.8 (v) µm1/3" (CV-S3300)6.5 (h) x 6.25(v) µm6.35 (h) x 7.4 (v) µmResolution (horizontal)>450 TV linesSensitivity on sensor0.09 Lux (AGC on, 50% video, 2856K)0.025 Lux (with 4 fields integration)S/N ratio>50 dB (AGC off, Gamma 1.0)Video output1.0 Vpp, 75 Ohm. VBS and Y/CGain modeFixed, AGC 12 dB, AGC 24 dB, ManualGain rangeFixed0 dBAGC 12 dB0 to +12 dBAGC 24 dB0 to +24 dBManual (on-screen menu)0 to +24 dBManual (RS 232C)0 to +35 dBGamma0.45 – 0.6 – 1White balance3200K, 4600K, 5600K, Auto, ManualIris controlDirect drive or video controlledIris direct drive±Drive and ±Damp. Level adjustIris video output1Vpp video and +9V DCBack light compensationOff, Pattern 1, pattern 2, Pattern 3SynchronizationInternal X-tal or external lockExternal lock input1 Vpp. VBS or composite sync.Scanning reversalOff, On (horizontally mirrored)ShutterOff (1/50 PAL, 1/60 NTSC), 1/125, 1/250,1/500, 1/1000, 1/2000, 1/4000,1/10,000 sec., CCD IrisShutter flickerless 1/120 sec. 1/100 sec.Extended sensitivityOff, Sensitive 1, Sensitive 2,(Integration)Exposure time 2 or 4 fieldsCamera setupOn-screen menu or RS 232CFunctions for on-screenShutter, Integration, Gain, Gamma,menu and RS 232CBack light, Scan reversal, White balance,Iris level controlFunctions RS 232C onlyY/C reversalOperating temperature-5°C to +45°CHumidity20-80% non-condensingPower12V DC ± 10%. 3WLens mountCS-mountFlange back adjust± 1 mmDimensions45 x 55 x 110.2 mm (HxWxD)Weight350 gSpecifications for CV-S3200/S3300 Series