《物理学报》投稿模版

《物理化学学报》征稿简则《物理化学学报》是由中国科学技术协会主管、中国化学会与北京大学共同主办、北京大学化学与分子工程学院物理化学学报编辑部编辑出版的学术刊物，月刊，向国内外公开发行，刊载物理化学领域具有原创性的基础研究和应用研究的成果。

遵循国际通行的办刊惯例，实行主编、副主编负责制；所有刊出稿件都必须经过同行评议。

从1997年起被SCI收录。

2016年平均出版周期：网络版为66天，印刷版为152天。

1 文稿形式《物理化学学报》接收的文章类型有亮点、通讯、展望、专论、综述、论文。

除亮点外，其他类型文章都应包括摘要、关键词、引言、结论、TOC等内容。

1.1 亮点：对物理化学领域的最新研究成果进行简要总结和学术性评论，以第三人称撰写，重点介绍、推荐中国科学家的贡献。

可以包括必须的公式、图、表，但应避免技术性细节和难懂的专业术语，以便广大公众能理解。

文章篇幅以少于1000字，文献不超过10条为宜，不需要摘要、关键词、引言、结论、TOC等内容。

1.2 通讯：快速发表在物理化学方面具有原创性、重要的研究结果，文章篇幅以以3000-4000字为宜。

作者在投稿时应说明文稿以通讯发表的理由，以便于同行评审时参考。

1.3 展望：就最近的一个研究热点进行深度分析，在谈及重要贡献者和文献的基础上，指出可能取得重要进展的方向或/和潜在的挑战。

展望可以就争论点进行阐释，也可提出推测性假设。

文章篇幅以以4000字左右，文献不超过50条为宜。

须提供每位作者的相片和简介(每位作者不超过100字)。

1.4 专论：简明清晰地总结作者自己课题组最新的研究情况。

在引言部分清楚、简明地说明该领域的研究现状；文章的主体内容应该是作者自己的研究成果及与他人研究工作的关系。

需要明确指出可能存在的争议、该领域的发展方向以及其在物理化学领域的重要性。

文章篇幅以以6000字左右，文献不超过50条为宜。

须提供每位作者的相片和简介(每位作者不超过100字)。

《物理学报》论文写作参考1、使用本模板撰写文章时请按照蓝色提示,定稿后请删掉蓝色提示.2、物理量单位用正体，物理量符号用斜体，矢量矩阵符号用黑斜体.3、使用国际标准的缩略词、符号和法定计量单位.符号及计量单位使用时应全文一致，正文中的缩略词在首次出现时应给出中英文全称, 后附缩略词, 并用括号括起，之后直接用缩略词，不再写全称.4、公式、图表和参考文献不采用文件链接.中文标题*（简短明确,基金资助有上标*）张三1)2) 李某四1)†诸葛五2)（通讯作者有上标†）1)（山西大学光电研究所，量子光学与光量子器件国家重点实验室，太原 030006）（全称到院或系）2)（清华大学物理系，北京 100084）摘要中文摘要部分．[300—400字，摘要中不用缩略词，不用第一人称.中英文摘要的结构建议包括：（1）研究背景和目的；（2）方法；（3）主要结果；（4）结论.简明扼要不分段，突出结论、成果]关键词：关键词1，关键词2，关键词3，关键词4（不超过4个，与英文Keywords一一对应）PACS：02.10.Yn, 33.15.Vb, 98.52.Cf, 78.47.dc（不超过4个，首码须与本文所研究的专业领域一致，PACS代码可在期刊网站下载中心下载）基金:国家重点基础研究发展计划（批准号：2011CB00000）、国家自然科学基金(批准号：50875132，60573172)和国家高技术研究发展计划（批准号：2011AA06Z228）资助的课题．（基金名称规范请在本刊网站下载参考“相关基金规范全称”）†通讯作者.E-mail: ***********电话：12345678901（通讯作者最好留手机）1 引言(为方便编辑校阅，全文用小四号宋体单栏2倍行距排版)20世纪80年代以来，量子光学发展了若干种方法：冷原子云释放再捕获(release and recapture, 简记为RR)[1]、冷原子云受迫振荡[2]、冷原子光谱分析[3]、非平衡四波混频[4]、飞行时间光谱（time of flight, 简记为TOF ）[5]和二维飞行时间吸收成像[6]等．[引言的写作直接影响到读者对文章进一步了解的兴趣，建议包括以下内容：（1）本研究领域背景的综述；（2）其他学者已有研究成果的详细描述；（3）陈述为什么需要进行更多的或进一步的研究；（4）阐述作者本项研究的目的；（5）简述本文开展的研究工作；（6）本项研究结果的意义（可选项）.特别指出的是，希望在引言部分介绍和引用国内外物理类期刊中本研究领域的最新、重要研究成果，以帮助读者清楚了解该领域的最新进展及本文的创新点]2 中性原子模型2.1 理论模型中性原子磁光在六维相空间中冷原子云的初始概率分布可近似表示为 [7]000000000{}(,,;,,)()()x y z i i iv i x N x y z v v v g i g v σσ∈=, ⋅, ∏ ， （1a ）111111000{}(,,;,,)()()x y z i i iv i y N x y z v v v g i g v σσ∈=, ⋅, ∏ ， （1b ）其中，00(,)i g i σ和0()i iv g v σ,为Gauss 分布函数．[公式插入最好用Mathtype 公式编辑器插入，避免以图片的形式插入] 2.2 实 验******如图1所示.温度T / KM /(e m u /g )图1 Gd 60Fe 30Al 10条带的磁化曲线 (origin 等软件绘制的插图)Fig.1. Magnetization cures of Gd 60Fe 30Al 10 band. [图题要求中英文对照，中文在前，英文在后.] [关于图的具体要求，可详见本刊“对图的要求”.]3 实验系统及测量结果*****如图2所示.图2电场幅值分布 (a) 长轴共线之γ75面；(b) 短轴共线之γ75面；(b) 长短轴共线之γ75面；(d) 长短轴共线之α面Fig. 2. Distribution of the electric field intensity: (a) γ75 plane of the long collinear axis; (b) γ75 plane of the short collinear axis; (c) γ75 plane of the long-short collinear axis; (d) α plane of the long-short collinear axis. [分图题也要求中英文对照]分析计算得到结果如表1所示．表1 不同流体对应的等价毛细管结构参数比较Table 1. Structural parameters of capillary of different kind of fluid.[表题中英文对照，中文在上，英文在下]流体类型直管分形毛细管R /cmL /cm R /cm L 0/cm HB 流体（ 1.0=μ，00.1=τ，0.8=n ） 0.097 0.501 0.124 1.0 宾汉姆流体（ 1.0=μ，00.1=τ，1n =） 0.112 0.905 0.124 1.0 幂律流体（ 1.0=μ，00τ=，0.8n =）0.0970.5010.1241.0(表格要使用如上所示的三线表,注意单位的写法)4 讨论部分（对研究结果进行恰当、充分而深入的物理解释和讨论）5 结论（在研究结果与讨论的基础上总结出本研究得到的重要论点，建议可包括以下内容：（1）解释结果；（2）将结果与之前提出的研究目的或假设相联系，阐明结果的重要性；（3）将结果与其他已有研究工作进行比较；（4）尽可能得出一个很清晰的结论.对每一个结论需要总结证据。

Sample manuscript for Applied Physics LettersA. Author,1,2,a)B. Author,2,b,c) andC. Author3,c)1Department, University, City, Postal code, Country2Corporation or Laboratory, Street address, Postal code, City, Country33Department, University, City, State (spell out full name), Zip code, USAThis is an abstract. It gives the reader an overview of the manuscript. Abstracts are required for all manuscripts. The Abstract should be self-contained (contain no footnotes or citations to references). It should be adequate as an index (giving all subjects, major and minor, about which new information is given), and as a summary (giving the conclusions and all results of general interest in the article). It should be approximately 250 words. The abstract should be written as one paragraph and should not contain displayed mathematical equations or tabular material. In this sample article we provide instructions on how to prepare and submit your paper to Applied Physic Letters, a journal published by AIP Publishing LLC. The AIP Publishing staff appreciates your effort to follow our style when preparing your manuscript.NB: Contrary to the structure of this sample, headings are not permitted in APL. They are used in this sample to assist the reader in locating information.THE MANUSCRIPTPlease use this “sample manuscript” as a guide for preparing your article. This will ensure that your submission will be in the required format for Peer Review. Please read all of the following manuscript preparation instructions carefully and in their entirety. The manuscript must be in good scientific American English; this is the author's responsibility. All files will be submitted through our online electronic submission system at .Manuscript preparationArticles can be prepared as either a Microsoft Word .doc/.docx file or a REVTeX/LaTeX file. The entire manuscript, should be set up for 21.6 × 28 cm (8-1/2 × 11 in. or A4) pages with 2.54 cm (1 in.) margins all the way around. The font and_____________________________Note: This is an example of a footnote to the title if the paper was part of a conference: Contributed paper, published as part of the Proceedings of the 17th International Conference on Physics, Anytown, State, May 2010.a)This is an example of a footnote to an author’s name: Authortowhomcorrespondenceshouldbeaddressed.Electronicmail:********************.b) This research was performed while B. Author was at Anywhere National Laboratory, City, State, Postal code, Country.the point size will be reset according to the journal’s specs, but authors most commonly use the Times Roman font and point size 12. The manuscript begins with a title, names of all authors and their affiliations, and an abstract, followed by the body of the paper, tables and figures, if any, included, and the reference section. Consecutively number all tables (I, II, III, etc.) and figures (1, 2, 3, etc.), including those in an Appendix. Figures, with figure captions, may be embedded within the manuscript to assist the reviewers. Number all pages consecutively, beginning with 1.Manuscript submissionAll files will be submitted through the online system: /. Each version of the manuscript (the original and subsequent revisions) should be submitted with its own complete set of files: a cover letter (indicating the title, authors, and contact information), a complete article file, and separate figure files (see Sec. I X―FIGURES). When uploading a revised manuscript, also include a response/rebuttal letter (indi cating the changes made to address the Editor’s and Reviewers’ comments).MANUSCRIPT LENGTHManuscripts should not exceed 3500 words.TeX usersAuthors are advised to use the REVTeX 4.1 file. If the double-column version of the manuscript obtained using the "reprint" option fits on four pages, the length is acceptable.Word usersPlease note that the abstract, title, author list, references, and acknowledgments are all excluded from the 3500-word limit. Figures, tables, and equations, however, are included and must be accounted for by calculating a word count equivalent to the space they occupy.Highlight the manuscript text, excluding abstract, author list, acknowledgements and references, and note the word count at the bottom of the screen. Add to that the word-count-equivalents for figures, tables and equations as follows: •Figures: 200 words for an average figure.•Tables: 13 words per line, plus 26 words.•Equations: 13 words per line.If the total number of words (text + figures + tables + equations) is 3500 or less, the length is acceptable.TITLEThe title of a paper should be as concise as possible but informative enough to facilitate information retrieval. Acronyms are not allowed in the title; they must be spelled out (exception to this rule is DNA). Chemical compounds are allowed in the title.AUTHORS’ NAMES AND ADDRESSESAuthors’ names should preferably be written in a standard form for all publications to facilitate indexing and to avo id ambiguities. Include the names and postal addresses of all institutions, followed by city, state, zip code, and USA if in the United States or by postal code, city, and country if not in the U.S. Please provide the complete address for each author. See the byline of this sample article for examples.Authors with Chinese, Japanese, or Korean names may choose to have their names published in their own language alongside the English versions of their names in the author list of their publications. For Chinese, authors may use either Simplified or Traditional characters. Chinese, Japanese, or Korean characters must be included within the author list of the manuscript when submitting or resubmitting. The manuscript must be prepared using Microsoft Word or using the CJK LaTeX package. Specific guidelines are given here.FOOTNOTESFootnotes are generally unacceptable in Applied Physics Letters, with the exception of footnotes to the title and the author’s names. Footnotes to the title should be set as a Note above the byline footnotes. All other footnotes should be converted to text or should be included in the reference section. Use a), b), c), etc., for footnotes to authors. The following list shows some examples:Note: Contributed paper, published as part of the Proceedings of the 17th International Conference on Physics, Anytown, State, January 2011.a)A. Author and B. Author contributed equally to this work.b)This research was performed while C. Author was at Anywhere National Laboratory, City, State, Postal code, Country.c)This is an example of a footnote to an author’s name: Author to whom correspondence should be addressed. Electronic mail:********************.HEADINGSHeadings are not permitted in Applied Physics Letters.EQUATIONSEquations need to be editable so we recommend that you create them with the built-in Microsoft® Equation Editor included with your version of Word. If you wish to use Mathtype, check for compatibility at /lzny753.o Users of the Windows version of Word: Please embed all fonts.o Users of Macintosh Word: Please save all files in DOCX format, as the use of DOC is not supported.Additionally, because font embedding is not possible, Mac Word users should limit their font selection to ()i N B N 2sin 2n n θ+2Φ()⎪⎪⎭⎫ ⎝⎛-=Tk E T c dBexp .(4)Equation numberingEquations are numbered consecutively through the entire paper as simply (1), (2), (3).... In appendixes, the numbering starts over as (A1), (A2), (A3). If there is more than one appendix, use (A1), (A2), etc. for equations in Appendix A; (B1), (B2), etc., for equations in Appendix B.When a numbered equation has more than one part and that (those) part(s) consecutively follow, then they are indicated as follows:(21) (22a) (22b) (22c)If, however, they do not follow consecutively, primes are used: (21)(22a)(22b)(21')(21'')presentation. Choose CMYK (cyan, magenta, yellow, black) for any figure that will appear in color in the print version.submitted at 600 dpi for the best presentation. Choose RGB (red, green, blue) for any figure that will appear in color only online.FIG. 3. This is a good example of information that was presented clearly. When this figure appeared in the printed journal it was in black and white print, but the reader was able to discern the “red” triangles, the closed “green” circles, and the open “black” circles. A description as well as the color is needed. If the caption had simply discussed “the red and green symbols,” the reader of the print vers ion would notunderstand because he/she would be seeing the figure without the color.FIG. 4. This is an example of line art. Figures should be created at 600 dpi and submitted at 600 dpi for the best presentation. Save line art as black/white bitmap, not grayscale..FIG. 5. This is an example of a halftone. Figures should be created at 265 dpi and submitted at 265 dpi for the best presentation.the best presentation.TABLE I.This table provides instructions on how to prepare figures.(a) General guidelines for preparing illustrations•Number figures in the order in which they appear in the text.•Label all figure parts with (a), (b), etc. Each figure file should contain all parts of the figure. For example, if Fig.1 contains three parts [(a), (b), and (c)], then all parts should be combined in a single file for Fig. 1.•Avoid any large disparity in size of lettering and labels used within one illustration.•Prepare illustrations in the final published size, not oversized. The maximum published width for a one-column illustration is 8.5 cm (3-3/8 in.). The maximum width for a two-column figure is 17 cm (7.0 in.).•In cases where reduction is required, avoid small open symbols that tend to fill in and avoid small lettering; ensure that, in the final published illustration, there is a minimum of 8-point type size (2.8 mm high; 1/8 in. high) for lettering and 0.5-point width for lines.•Ensure that lettering and lines are dark enough, and thick enough, to reproduce clearly. Remember that fine lines tend to disappear upon reduction.•It is preferred that authors embed figures and captions in the manuscript file. Embed the figures in the approximate position and size you think is appropriate.• In addition, separate figure files must be provided (see below for accepted file formats) along with the manuscript.(b) Guidelines for preparation of electronic graphics files•Acceptable formats for figures: Portable Document Files (PDF), Encapsulated PostScript Files (EPS), PostScript, or Tagged Image File (TIF), and JPEG (.jpg) Microsoft Word files are not acceptable.•More detailed information is given about figure preparation on the website in the Preparing Graphics instructions.•Settings: Set the graphic for 600 dpi resolution for line art, 265 dpi for halftones, and 600 dpi for combinations (line art + halftone).•Save line art as black/white bitmap, not grayscale.•Save halftones and combinations as grayscale, not black/white bitmap.•Click the link to “Publication Charges & Open Access Fees” on the About tab for publication charge information.•Submit color files at 300 dpi in one of the accepted file formats: PDF, EPS, PS, or TIF. No other type of color illustration is acceptable. When selecting a file mode, for print choose CMYK (cyan, magenta, yellow, black) and for color online choose RGB (red, green, blue).•PDF files should be vector files.•In the PDF illustration, resolution of any shaded or photographic images must be 600 pixels per inch (PPI). •Within the PDF illustration, resolution of line art with no shading should be 1200 pixels per inch (PPI).•All fonts must be embedded in the PDF.•Select "High Quality Print" when creating a PDF through the application’s print command.•If usable color graphics files are received in time for the production process, authors will see color versions of those illustrations when viewing their author proofs. (The Corresponding Author will receive e-mail notification from AIP Publishing when the proof, as a PDF file, is available for downloading.)•The author is responsible for obtaining permission to reuse previously published material. Full credit lines are needed for figures that are used with permission. An example of the recommended format for crediting material from a journal article is: “Reprinted with permission from [FULL CITATION]. Copyright [PUBLICATION YEAR], [PUBLISHER NAME].” Full citation format is as follows: Author names, journal title, Vol. #, Issue #, Page # (or CID#), Year of publication. For example, the credit line would appear as: “ReprintedTABLESSeparate tables (numbered with Roman numerals in the order of their appearance in the text) should be used for all tabular material. Tables must be embedded in the article file, not uploaded like figure files. The structure should be clear. Use simple column headings and include units of measure. Table captions are positioned above the table and should be styled as “TABLE I. This is a table caption.” A caption should make its table intelligible without reference to the text. Capitalize the first word in the table headings and subheadings. References within tables are designated by lowercase Roman letter superscripts and given at the end of the table. Unaltered computer output and notation should be uploaded as supplementary files. See Table II for an example of correct table styling.TABLE II. Bond distances for alkene molecules (atomic units).No. C a RI,I+1b SRI,I+1c RI−1,I+RI,I+1SRI−1,I+RI,I+12 2.5255 ………4 2.6175 0.123 5.306 …6 2.6314 0.0999 5.3025 0.01128 2.6368 0.0876 5.3009 0.011110 2.6396 0.0795 5.2999 0.010614 2.6424 0.0689 5.2989 0.009618 2.6437 0.0623 5.2982 0.008822 2.6443 0.0573 5.2973 0.00826 2.6448 0.0536 5.2968 0.0074b RI,I+1 is the distance between two neighboring carbon atoms, while ‹RI,I+1› is the averageof RI,I+1 for a given molecule.c SRI,I+1 is the standard deviation of RI,I+1 within the given molecule.MULTIMEDIA SUBMISSIONSMultimedia files can be included in the online version of published papers. All such files are peer reviewed. When published, these files can be viewed by clicking on a link from the figure caption, provided that the reader has a video player installed, such as Windows Media PlayerTM, Quick Time PlayerTM, or RealOne PlayerTM. Please click on Supporting Data in our Author Resource Center. Please note the following important information when preparing your manuscript: •When incorporating multimedia, note that the paper should be written so that the printed version can be understood on its own.•Submit all multimedia files initially with the manuscript.•Treat all multimedia files as figures numbered in sequence as they are referred to in text.•For each multimedia file, provide a figure, which is a static representation of the multimedia file. Also provide an accompanying caption. At the end of the caption, include the phrase, "(multimedia view)."Video and other enhanced files should be in a format that the majority of readers can view without too much difficulty. Please click on Supporting Data in our Author Resource Center for specific submission requirements.SUPPLEMENTARY MATERIALText material that may not be of interest to all readers, long data tables, multimedia, and computer programs may be deposited as supplementary materials.Present supplementary material within its own section before the Acknowledgments as shown in the example below. AIP Publishing will insert the hyperlink to bring the reader to the files.All in-text citations of the supplementary material will link to that section. Be sure to include the phrase “supplementary material” when describing it in text, as shown in the example below.All supplementary material is posted online exactly as provided by the author. AIP Publishing makes no changes to the supplementary material files, including text editing or file conversion.ACKNOWLEDGMENTSTypically, standard acknowledgments include financial support and technical assistance, and may include dedications, memorials, and awards. Check with the Editorial Office for suitability of an acknowledgment if there is any question. To indicate the author, use initials. For example, “B.A. wishes to thank A. Loudon for technical assistance. C.A. wishes to thank Anytown University for use of their equipment.”Note: the Acknowledgment section should be set as your last paragraph of text before the references.APPENDIXAppendixes are not permitted in Applied Physics Letters.REFERENCESReferences may be styled as numerical, bibliographic, or numerical bibliographic.Duplicate references are not permitted.Note that numerical references should be numbered consecutively in order of first appearance in the text and should be given in a separate double-spaced list at the end of the text material. A numerical reference may be cited within other references; however, it must also be cited at least once in the main body of the paper.See Table III for acceptable reference formats.TABLE III.This table provides instructions on how to prepare references.to books and journal articles, listed at the end of the paper, should appear in one of theseformats:(1) Numerical: By number, in the order of first appearance, giving the names of the authors, the53V. Bargmann, Proc. Natl. Acad. Sci. USA 38, 961 (1952).This paper will be listed as the 53rd in the list of references and cited as 53.(2) Bibliographic: In alphabetical order according to the first author's last name, giving, in addition to the name, volume, year, and first and last page, also the title of the paper cited, as in:Bargmann, V., "On the number of bound states in a central field of force,"' Proc. Natl. Acad. Sci. USA 38, 961–966 (1952).Within the body of the paper, this reference will be cited as "Bargmann (1952)." If there are several articles by the same author(s) and the same year, they should be distinguished by letters, as in (1952a).(3) Numerical Bibliographic: Alphabetically listed references (with full titles and page ranges) may be numbered according to their alphabetical order and cited by their number.1Berger, A., "Instabilities and waves on a columnar vortex in a strongly stratified and rotating fluid,"' Phys. Fluids 25, 961–966 (2013).•Articles “submitted to” or “accepted for publication” (but not yet published) in a journal must include article title: When possible, these references should be updated inthe galley proof.Samples of Numerical References:Books: List authors and editors. Must include publisher, city and year of publication, and the page numbers (unless the entire book is being cited).2R. J. Hunter, Zeta Potential in Colloid Science (Academic, New York, 1981) p.120.AIAA Papers:AIAA Papers: The usual format is: {Author’s names}, {Paper Title}, AIAA Pap. {usual formats are 99-1111 or 2004-2222}, {year -- corresponds to numbers on left side of paper number}..3M.S. Narayan and A. Banaszuk, “Experimental study of a novel active separation control approach,” AIAA Paper No. 2003-0060, 2003.Conference proceedings: Include the list of authors, the title of the proceedings, the city and year of the conference, the name of the publisher (cannot be a laboratory or institution), city and year of publication (or the words “to be published”), and the page numbers. Include the full list of editors, if they are given.4R. K. Ahrenkiel, in Gallium Arsenide and Related Compounds 1993: Proceedings of the20th International Symposium on Gallium Arsenide and Related Compounds, Freiburg, Germany, 29 August–2 September 1993, edited by H. S. Rupprecht and G. Weimann (Institute of Physics, London, 1994), pp. 685–690.Government publications:Format as for a book citation. Each must include the author(s), title of the publication, name of the publisher, city and year of publication, and page numbers (unless the entire publication is being cited).5D. Nunes, The Brillouin Effect (U.S. Department of Energy, Washington, DC, 1992).Journal citations: Include authors (see author rule above), volume number, beginning page number, and publication year:6J. D. Kiely and J. E. Houston, Phys. Rev. B 57, 12588 (1998).Laboratory report: May only be used if first deposited with a national depository such as the National Technical Information Service. (Check with the NTIS librarian at 703-605-6000.) Materials or reports in electronic form—codes, data tables,etc.—may be uploaded as supplementary material files (see Sec. XIII). If the paper is on deposit with NTIS, use the following format:7See National Technical Information Service Document No. DE132450 L. (R. Newchuck, SESAME Tables, LANL Rep. 23453, 1983). Copies may be ordered from the National Technical Information Service, Springfield, VA 22161.MOLPRO:8H.-J. Werner, P. J. Knowles, R. Lindh, F. R. Manby, M. Schütz, et al., Molpro, version 2006.1, a package of ab initio programs, 2006, see Multiple citations are acceptable:8D.-Y. Choi, S. Madden, A. Rode, R. Wang, and B. Luther-Davies, J. Non-Cryst. Solids354, 3179 (2008); J. Appl. Phys. 104, 113305 (2008).(same authors, different journals)or9J.Scaroni and T. Mckee, Solid State Technol. 40, 245 (1997); M. G. Lawrence, Bull. Am. Meteorol. Soc. 86, 225 (2005).(two completely different references)or10Y. de Carlan, A. Alamo, M. H. Mathon, G. Geoffroy, and A. Castaing, J. Nucl. Mater.283–287, 762 (2000); M. H. Mathon, Y. de Carlan, G. Geoffroy, X. Averty, A. Alamo, and C. H. de Novion, ibid.312, 236 (2003).(different authors, same journal)Patents: Titles are allowed.47K. Inoue, U.S. patent 3,508,029 (22 March 1970).48 W. L. Tolin and A. M. Laud, U.S. patent pending (5 October 1996).49 J. R. Smith, U.S. patent application 037/123,456 (18 May 2010).Preprints and electronic postings:Preprints or eprints that have not been submitted to a journal for publication (i.e., are only posted on a preprint server) cannot be used as references.Private communication:May not be one of the authors of the article. Must include the year in which the communication took place.11A. Einstein (private communication, 1954).Software manuals: If published, use the book format; if not published, give the entire address for the software maker.Thesis/dissertation: Include the author, school, and year, but not the title.12S. L. Goldschmidt, Ph.D. thesis, University of California, Los Angeles, 1985.Web sites:References containing URLs are permitted but should have additional explanatory text, as well as the date the website was last accessed.1See /hummingbird for more information about hummingbirds; accessed 28 July 2012.2See / for “Nanometer Pattern Generation Systems for Scanning Electron Microscopes” (last accessed April 15, 2013).。

物理通报组稿加工
《物理通报》是一本有较高学术价值的大型月刊，国内统一刊号：CN：13-1084/O4国际统一刊号：ISSN：0509-4038主办单位：河北省物理学会;中国教育学会物理教学专业委员会自创刊以来，选题新奇而不失报道广度，服务大众而不失理论高度。

颇受业界和广大读者的关注和好评。

《物理通报》已发展成一本以教学研究为主，横跨中学与大学物理教学，提倡“百花齐放，百家争鸣”，注意科学文化品味，普及与提高相结合的综合性物理杂志。

《物理通报》栏目设置：
名家谈、物理与科技创新、课程改革探索、物理教育研究、物理教学讨论、研究性教学案例、多媒体物理教学、实验教学研究《物理通报》投稿须知：
（1）投寄本刊的稿件，首先要注意是否符合本刊上述性质与特点以及本刊所设栏目的内容要求。

（2）文章属地、厅级及以上单位立项的课题成果，请在文章首页左下角注明课题全称和批号。

（3）投稿须明确注明作者姓名、电话、单位、邮编、联系电话和详细地址，E-mail，以便及时投寄录用通知。

（4）《物理通报》有些文章面面俱到，泛泛而谈，难以给人深刻印象。

谈观点，说体会，最好结合物理教学的具体内容，包括教学过程，学生反映与效果，自己的体会等。

（5）《物理通报》为了能吸引读者，有可读性，希望撰稿时尽可能图文并茂、生动活泼一些，多给读者一些信息。

绘图要求规范，照片要求清楚。

journal of physics d模板摘要：一、期刊基本信息1.期刊名称：Journal of Physics D: Applied Physics2.影响因子：2.721（2014-2015年）3.所属学科：物理-物理：应用4.出版周期：每周5.出版年份：1970年6.出版社：IOP Publishing Ltd.二、投稿与审稿经验1.审稿周期：约70天2.审稿过程：大改3.状态变化：投稿后一个月变为awaiting decision，随后变为awaiting referee report正文：Journal of Physics D: Applied Physics是一本知名的SCI二区杂志，主要涵盖物理-物理：应用领域的研究。

该期刊成立于1970年，由IOP Publishing Ltd出版，每周出版一次。

2014-2015年的影响因子为2.721，表明其在相关领域的学术影响力较高。

对于投稿作者来说，Journal of Physics D: Applied Physics的审稿周期较为合理，大约需要70天。

一位投稿作者表示，自己在投稿后一个月时，状态已变为awaiting decision。

然而，几天后状态又变为awaiting referee report，推测原因是编辑又找了更多审稿人。

在这个过程中，作者经历了大改的过程，最终完成了审稿。

总的来说，Journal of Physics D: Applied Physics是一本具有较高影响力的SCI期刊，对于物理领域的研究者来说，投稿于此期刊具有较高的价值。

审稿周期相对合理，但审稿过程可能因审稿人的增加而有所延长。

《物理化学学报》征稿简则《物理化学学报》是由中国科学技术协会主管、中国化学会主办、北京大学化学与分子工程学院物理化学学报编辑部编辑出版的学术刊物, 月刊, 向国内外公开发行, 刊载物理化学领域具有原创性的基础研究和应用研究的成果. 从1997年起被SCI收录.1 文稿形式通讯(快报): 以短文形式快速报导有重要创新价值的研究成果.研究论文: 报导学术价值明显、有创新的系统性研究成果.综述: 结合自己的系统研究, 对物理化学某个分支领域国内外最新研究进展做综合评述. 建议全文超过10000字, 引用参考文献多于100条.2 文稿准备文稿可用英文或中文撰写, 推荐用英文撰写. 为便于国内外数据库收录和审稿, 中、英文稿均需有中、英文题目, 作者姓名与单位, 摘要, 关键词. 文稿请注明中图分类号.2.1.1 文章题目宜简单明确, 能突显出文章的主要内容和独特之处, 中、英文题目含义应一致; 文题中尽量避免使用‘研究、探讨、初探’等词语. 英文题目实义词的首字母用大写, 其余小写.2.1.2 作者姓名的汉语拼音, 姓全大写、名首字母大写, 双名两字之间加连字符, 如OUYANGGuo-Bin (欧阳国宾); 请在通讯联系人姓名右上方标注*号.作者的署名及顺序以投稿时文稿上标注的为准. 作者英文单位使用全称, 不用缩写.2.1.3 请在文章首页脚注中给出通讯联系人的Email地址和电话; 稿件所及工作若有基金资助, 请在首页脚注以中、英文注明项目准确的基金名称及批准号.2.1.4 中英文摘要按照“拥有与文章同等量的主要信息”的原则, 应能简明、确切地阐述文章的创新性内容, 给出研究目的(有时可省略)、方法、重要的结果和主要结论; 但不宜对文章内容和结论进行评价或评论, 不宜有引言中出现的内容, 不宜简单重复题目中已有的信息; 不推荐在摘要中引用文献, 除非文章证实或否定了他人已发表的结果. 摘要中尽量不使用复杂化学结构式、图片和公式. 英文摘要的含义应与中文摘要一致, 但不应逐字翻译中文摘要; 英文摘要尽量使用简单句, 避免使用复句套复句的超长语句, 推荐篇幅为200−400个单词.2.1.5 英文关键词需与中文关键词相对应, 并有5−8个关键词, 尽可能不使用题目中已有的词.2.1.6 前言部分讨论与文章内容相关的文献已报道的结果, 不宜简单描述某某做了什么、得到什么结果和结论, 而应进行有深度的归纳和总结. 前言需清楚并简明地说明研究目的、重要性、创新性和对该领域的新贡献, 但不需要在前言中交代具体的结果或结论.2.1.7 为便于感兴趣的读者重复实验(计算)结果: 实验部分应交代足够的实验细节以及可能存在的危险; 特殊试剂需要给出厂家和纯度, 常用试剂只需给出纯度; 主要仪器需要给出厂家和型号以及主要的实验参数; 计算部分应交代计算所用程序、计算步骤、计算方法以及所用参数. 2.1.8 结果与讨论部分应准确地呈现主要结果, 并注意数据之间以及数据与文字之间的逻辑一致性.应结合文献结果进行有深度的讨论, 而不仅仅是描述结果, 建议讨论结果的重要性并能与前言中提出的问题相呼应.2.1.9 结论部分给出研究取得的结论, 可适当评论结果的意义以及还需要解决的问题.专业术语的缩略语、略称或代号, 在首次出现时需注明其全称或加以说明.文稿中的物理量(量符号需用斜体)与单位推荐按照“中华人民共和国国家标准GB3100~量和单位”的规定表述. 出现组合单位时, 请在单位与单位之间加点乘符号, 如J·K−1·mol−1. 物理量如需加注上、下角标说明时, 其字符位置高低应区别明显, 如: S BET、r n等.文内较长或需突出的公式, 推荐单独占一行并居中. 有机化合物及一般配合物尽量不写结构式, 尤其是在行文及表格中使用时, 请采用简单的化学式或以适当的化学名称表示. 对一些复杂的结构式, 可将该化合物作为图编号, 正文及表格中使用其编号.行文内书写含分数式的公式时, 请用斜分数线, 如ΔS=Q r/T, θ=b/(1+b). 带根号的公式, 请用幂的形式表示, 如F(α)=1−(1−α)−1/2. 较复杂的e为底的指数, 以exp形式表示, 如exp(−E a/RT).推荐文稿用WORD录排, 小四号字, 中文用宋体, 英文用Times New Roman, 字体颜色选为黑色, 文题和节标题加粗, 倍行距. 请尽量不要使用公式编辑器输入简单的字母、符号和公式. 希腊字母(如α, β)请直接插入相应的字母, 不要用英文字母(a, b)变换成Symbol符号(α, β), 以避免因转换字体使其不能正常显示. 文稿通栏排版.图表2.7.1 图、表按在文中出现的先后顺序, 分别用阿拉伯数字编号(如, 图1、图2、图3…,表1、表2、表3…), 并且所有图、表均应在正文中被提及.2.7.2 为便于国外读者理解文章主要内容, 图、表应具有自明性; 图、表有对应的中英文图题、表题(英文文章不需要中文图题、表题), 图题、表题应尽量简短, 将说明性文字以及对图表中使用的符号的解释说明放在图注、表注中; 图注、表注及图表中的各项表述只使用英文.2.7.3 图可用*.TIF、*.JPG、*.PCX、*.BMP等格式, 推荐优先使用*.TIF. 曲线图推荐用Origin做图, 并将Origin原图插到Word文档中, 无须转换为JPG或TIF图. 单栏图片最大尺寸为8 cm⨯20 cm, 通栏最大尺寸为17 cm⨯20 cm, 通栏的宽应大于10.5 cm. 图的分辨率宜达到或超过如下标准: 黑白曲线图600 dpi, 灰度图300 dpi, 彩色图300 dpi.2.7.4 图应墨黑线匀、曲线位置适中美观, 曲线的粗细是坐标轴的2倍. 图中曲线达两条以上而需加以区别者, 推荐以字母编号, 图中的数字、字母等一律用Arial字体. 图中坐标刻度线应朝向图内. 照片要求层次分明, 有足够的反差; 显微图片应标明尺寸比例.2.7.5 表格一律采用三线表, 表格栏目要配置适当.2.7.6 图的坐标及表头栏目, 使用该物理量的符号(勿使用复杂的英文全称)与其单位符号的比值,如ΔG / (kJ·mol−1)、T / K、t / s, 图的坐标分度及表内只列数值.2.7.7 文中图、表应是表达文章主题所必须的, 同一批实验数据不应重复表述于图、表中, 更不能为增加篇幅, 而将与文章主题无关的图、表放在文章中. 若一些图、表对文章主题有辅助作用, 可只作为‘Supporting Information’发布到网站.2.7.8 请尽量提供彩色图片, 以利制作彩色PDF文档. 用Word软件处理图文混排的文章时, 最好将图以嵌入方式插入文章中相应的位置, 以免图片发生不可预知的移动.参考文献2.8.1 为便于国内外数据库收录, 中文文献均以英、中对照形式著录. 每条文献的作者全部照录, 不可省略. 引用物理化学和化学物理类期刊最近刊出的文章, 能突显出文稿内容对物理化学学报读者的重要性. 请恰当引用国内刊物以及您自己的前期工作.2.8.2 文献著录等效采用The Journal of Physical Chemistry A/B/C的格式, 在使用Endnote, ReferenceManager, ProCite等软件插入和管理文献时, 请选用The Journal of Physical Chemistry A/B/C的文献样式. 以下是具体示例, 更详细情况可参考The ACS Style Guide.2.8.3 文献按在文中(包括图、表中引用的文献)出现的先后顺序从‘1’开始编号, 在句子中的适当位置以不加括号的上标形式标注, 句子或从句的引用, 将文献编号放在标点符号的后面(如…取得了进展,1,2), 提及被引作者时, 将编号放在被引作者姓后; 2位作者的文献将2位作者都列出(如张文兰和李奇思3), 3位以上作者, 只列出‘第1作者+等’, 引用同一责任作者的多篇文献, 以‘责任作者+其合作者(或同事)’形式表示(如王武与其合作者2,4-6); 引用多篇文献以逗号分开, 中间不加空格, 3篇以上连续文献, 以一字线连接首、末文献编号; 文献列表中将文献编号放在圆括号中(如(8)).2.8.4 期刊:按“作者. 缩写刊名年,卷, 页.”顺序著录. 对每期页码从1编号的期刊, 以‘(期号)’形式给出期号; 对于增刊, 在卷号后, 以‘(Suppl. 期号)’形式给出期号; 对没有卷号的期刊, 以‘No. 期号’形式给出期号; 期号均放在卷号后, 并与卷号之间留一空格. 刊名缩写参照CASSI, 即Chemical Abstract Service Source Index, 也可从SCI网站jcr)查询SCI收录期刊的ISO缩写形式.例1 Zhong, A. G.; Huang, L.; Li, B. L.; Jiang, H. J.; Liu, S. B. Acta Phys. -Chim. Sin. 2010, 26, 2763. [钟爱国, 黄凌, 李佰林, 蒋华江, 刘述斌. 物理化学学报, 2010, 26, 2763.]2.8.5专著、译著: 按“著者. 著作名, 版本; 出版者: 出版地, 出版年; 卷, 页码范围.”顺序著录.例2 Schmickler, W.; Santos, E. Interfacial Electrochemistry, 2nd ed.; Springer: Heidelberg, 2010;pp 99–113.例3 Oyama, M.; Umar, A. A.; Zhang, J. D. Recent Advances in Metal Nanoparticle-Attached Electodes. In Advanced Nanomaterials; Geckeler, K. E., Nishide, H. Eds.; Wiley: San Francisco, 2010; pp 171–188.例4 Casser, R. P. H. An Introduction to Chemisorption and Catalysis by Metals; Peking University Press: Beijing, 1991; pp 228−241; translated by Zhao, B. Y., Wu, N. Z., Bu, N. Y. [Casser, R.P. H. 金属的化学吸附和催化作用导论. 赵璧英, 吴念祖, 卜乃瑜, 译. 北京: 北京大学出版社, 1991: 228−241.]2.8.6 会议论文: 会议文集必须为正式出版物方能列为参考文献. 须按“著者. 题名. In 文集名, 会议名, 会址, 开会时间; 编者, Eds.; 出版者: 出版地, 出版年; 页码范围.”顺序著录.例5 Zhao, X. S.; Ugliengo, P. Cataluminescence Performance on Catalysts of Graphene Supported Platinum. In Structure and Reactivity of Surfaces, Proceedings of the European Conference, Trieste, Italy, Sept 13−20, 2008; Zecchina, G., Cost, P., Morterra, D., Eds.; Elsevier: Amsterdam, 2009.2.8.7 专利: 按“著者. 专利题名. 专利号, 公告日期或公开日期.”顺序著录.例6 Li, X. H.; Geng, W. G.; Pan, W. P.; Duan, H. L. Synthesis of 1-Diester-3-alkylimidazolium Ionic Liquids. CN Patent 10 032 , 2005-01-04. [李雪辉, 耿卫国, 潘微平, 段红丽. 1-双酯基-3-烷基咪唑离子液体及其制备方法: 中国, CN10 032 [P]. 2005-01-04.] 例7 Jantschoff, K.; Lensen, F. C.; Kiudrowski, P.; Mossing, W. Pt/FTO Counter Electrode for Dye-Sensitized Solar Cells Prepared by Sputtering-Displacement. Eur. Pat. Appl. 7458483, 2009.2.8.8学位论文: 按“著者. 题名. 学位, 授予单位名称, 授予单位所在地, 授予时间.”顺序著录.例8 Liao, W. Study on Novel Protein Chip and Biosensors Based on FTIR-ATR. Ph. D. Dissertation, Peking University, Beijing, 2005. [廖玮. 新型蛋白质芯片及基于全反射红外的生物传感器的研究[D]. 北京: 北京大学, 2005.]2.8.9 电子文献: 按“作者. 题名. 获取或访问路径(访问日期).” 顺序著录.例9 Welcome to Acta Phys Chim Sin. (accessed Oct 27, 2010).2.8.10 软件: 按“著者. 软件名, 版本; 出版者: 出版地, 出版年.”顺序著录.例10 Frisch, M. J.; Trucks, G. W.; Schlegel, H. B.; et al. Gaussian 03, Revision ; Gaussian Inc.: Pittsburgh, PA, 2003.3 投稿可通过网上在线投稿或)投稿.请随文稿附短函(Cover Letter)说明文章的亮点(创新点), 通讯联系人(应为本文学术负责人或单位相对稳定的人员)及所有作者的联系方式(通讯地址及邮编、电话、Email、传真), 推荐三个以上的专家审稿, 并声明单位和作者署名无争议. 有外籍人士署名的稿件, 需附该人士同意在我刊发表此稿件的信函(或Email).4 稿件的审理和费用收到稿件１周内对稿件进行初审, 并通过Email将初审结果通知作者. 请按通知要求提交经全体作者签署并由通讯作者单位审查盖章的版权授权书. 同行评审平均周期为21天, 但有时因审稿专家非常忙, 评审时间会比较长, 但一般不会超过10周. 经审理拟刊用的稿件, 责任编辑将同行评审结果和格式方面的修改建议一起返给作者.从2008年起停止收取稿件评审费(注册费).提请作者校对清样时通知交纳版面费: 收费标准100元/印刷版面; 若需彩色印刷, 每印刷版面另收300元印刷成本费. ‘邀请稿’以及录用为‘通讯’的稿件免收版面费; 确实有困难的作者可申请减免版面费. 期刊印出后, 赠送当期期刊2本和精装抽印本10份.物理化学学报开户银行: 中国工商银行北京分行海淀西区支行户名: 物理化学学报编辑部帐号: 088(信汇单上请注明联系人姓名和稿件编号)我刊刊发的文章被文摘类刊物及检索机构(如ISI、CA、中国学术期刊文摘)无偿收摘, 全文电子版在我刊网站和期刊全文数据库网上公布(如万方数据库、中国期刊网、维普全文电子期刊、中国台湾CEPS).如有异议, 请在投稿时事先声明.按审稿意见修改并经进一步审核和加工后, 文稿将进入发排和组版状态(可登陆投稿系统查询), 若需录用证明, 请与责任编辑联系.5 通讯地址: 北京大学化学学院《物理化学学报》编辑部, 邮政编码: 100871服务热线: +86-, , Fax: +86-, Email刊物网址: 亦可从北京大学主页中的科学研究/学术期刊页面进入)《物理化学学报》编辑部2010年11月7。

36卷(2007年)3期 htt p:ΠΠwww .wuli .ac .cn读者和编者《物理》主要栏目及投稿须知一、主要栏目特约专稿:知名专家对物理学某学科领域高屋建瓴的评述,对科研、教学或人生的感悟.研究快讯:国内外华人物理学工作者取得的重要研究成果介绍,如在PRL,Science,Nature 等国际著名期刊发表的工作(含图不超过4000字,每张图计500字下同).评 述:深入浅出地评述物理学及其交叉学科某一前沿领域的历史、现状和发展前景(含图不超过12000字).前沿进展:介绍物理学及其交叉学科前沿领域的最新进展和新知识(含图不超过8000字).物理学和高新技术:反映物理学与高新技术的相互渗透和促进,介绍高新技术领域的物理学应用以及物理学领域的高新技术成果(含图不超过8000字).实验技术:介绍物理学及相关学科的新实验技术、实验方法(含图不超过6000字).讲 座:物理学及其交叉学科前沿热点领域和新生长点的专题知识系列介绍(含图不超过8000字).物理学史和物理学家:以独特的视角评述有影响的物理学家和物理学发展历史(8000字以内).物理学与社会:物理学家表达对政治、经济、科技、教育、文化等社会方方面面的思考和建议的窗口,反映物理学与社会的密切联系以及物理学家的社会责任感(6000字以内).物理教育:大学物理教育、教学改革与实践的研讨和创新性探索(6000字以内).问题讨论:有重要学术意义和应用背景的物理学问题学术讨论和交流(6000字以内).书评和书讯:物理学新书评介,新书要目及近期引进的外文书目选登.物理新闻与动态:迅速、简要地报道近期国内外物理学重要研究动态和重大事件.中国物理学会通讯:作为物理学会机关刊物独家报道学会最新重要消息.科学基金:报道国家自然科学基金委员会数理学部有关物理(I )学科基金评审的重要信息.信息服务:刊登各单位博士后、博士和硕士研究生招生信息,人才招聘、求职信息,会议通知,新产品信息等.二、投稿须知1、可读性:文章的可读性是我刊的重点要求,也是我刊的重要特色之一.请尽量少用数学公式,多用形象的图片和通俗的语言帮助读者理解.引言部分的写作尤为重要,需要提供较为详细地相关背景资料,评述力求深入浅出,使具有大学水平的广大非本专业的读者有所获益;2、文章选题:力求具有广泛性、新颖性和可读性,反映前沿新进展;3、中英文摘要:摘要的写作要求给出有关研究的实质性信息.除了对文章主题及所属领域和研究对象给出简短叙述外,更要对文章的理论或实验结果、结论等给出清晰具体的叙述,一些必要的数据也要给出.中文摘要150—300字为宜,英文摘要400—700字符.4、关键词:关键词不应少于4个,第一个是主要内容所属二级学科名称(《学科分类与代码》国标G B /T 13745-92),第二个是研究得到的成果名称,第三个是采用的科学方法的具体名称,综述性文章写“综述”,第四个是前面没有出现但被文章作为主要研究对象的事或物质的名称,或是题目中作者认为重要的名词,若需要可以列出其他有利于检索和文献利用的关键词.5、作者姓名采用汉语拼音(姓在前,名在后),需要注明国外曾用名的可用括号注其后.请附联系人详细通讯地址、电话、传真、e mail,并请标明课题负责人及其联系方式.6、单位名称要求具体、准确、规范、完整,并附相应的规范英文名称.7、物理量及其单位请按国际标准和我国法定许用标准使用,并一律用英文缩写符号;正文中缩略词在首次出现时写明全称,后附缩略词.8、插图:(1)图需一式两份,激光打印,或用透明纸描绘,大小一般以不超过5c m ×8cm 或10c m ×16c m 为宜;(2)图在文中的位置用一方框表示,框下注明图题、图号;(3)图中纵横坐标物理量和单位用英文缩写,形式为“物理量/单位”,对大小写、正斜体容易混淆的外文字母需用铅笔进行标注.(4)照片请提供图像清晰、层次分明的原照片.9、封面彩图:反映国内外物理学学术新成果和新进展,可以与相关文章配合刊登也可以单独刊登,要求最好是彩色,图片清晰美观,提供电子版或原照片,并附300字左右的封面说明.10、参考文献:　(1)参考文献序号按在文中出现的先后顺序排列,正文中参考文献序号加[]置于右上角,文末将参考文献按序号逐条列出;　(2)中英文人名均采用姓在前名在后的格式;　(3)参考文献格式:　期刊:作者.刊名,出版年,卷号(期号):页码　例:[1]Sun L F,Xie S S,L iu W et al .Nature,2000,403:384　书籍:作者.书名.出版地:出版者,出版年.页码　例:张立德等.纳米材料和纳米结构.北京:科学出版社,2001.18　论文集:作者.文题名.见(英文用I n ):编者.论文集名.出版地:出版者,出版年.页码　例:Jagannathan B,W allace R L,Anders on W A et al .Amor phousand M icr ocrystalline Silicon by ECR -CVD U sing H ighly D ilute Silane M ixtures .I n:I EEE Pr oceedings of the 26th Phot ovoltaic Specialists Conference .Ne w York,1998.675　(4)引用网络文献请列出相关链接;　(5)中文及其他文种文献后需同时附加标准英译文,并用括号注明原语种,如中文注明(in Chinese ).11、投稿:(1)登陆我刊网站www .wuli .ac .cn 进行网上投稿;(2)纸质投稿,一式两份,用小四号字单面两倍行距通栏打印,经审理通过拟刊登的稿件需提交电子版.12、获基金资助的论文请在文稿首页脚注位置给出基金和资助机构的规范名称及批准号.13、来稿一般不退,请作者自留底稿.本刊在收到稿件后3个月内通知作者处理结果,在此期间若要另投请通知编辑部,切勿一稿多投.14、来稿一经录用,将按照国家的有关规定收取版面费,文章版权(含纸张、光盘和网络等介质)需转让给编辑部,作者稿费一次性付清.15、本刊已签署中国科协《全国性学会科技期刊道德公约》.投给本刊的稿件作者必须保证:文章署名无争议,引用他人著述已注明出处,文章未在别处以任何形式公开发表,在规定的期限内无一稿两投.本刊坚决拒绝弄虚作假、抄袭剽窃者,一经查实,视情节轻重给予书面警告、拒绝刊登有其署名的稿件、通知其所在单位、公开曝光等处理.・162・。

郑州大学物理工程学院学报投稿经验
1.刊登内容
本刊主要刊登化工、电气、机械、水工、材料、土木建筑、信息物理、化学及交叉学科等方而的学术论文(中文稿)
2.来稿要求
(1)要求论点明确、数据可靠、文字简练
(2)来稿一式两份，打印稿为优.若系基金资助课题、攻关项目或博士论文，请在首贞地脚处注明(包括项目编号)，本刊将优先刊登
(3)文稿格式要求规范、项目齐全，按顺序给出:题目(不超过20字)，作者(包括工作单位、地址、邮编)，摘要(包括研究目的、方法、结果和结论四要素，200~300字)，关键词(3~8个)，中图分类号，正文(包括图、表，6000字左右为宜)，参考文献，英文摘要(与中文摘要一一对应，包括英文题目、作者姓名、单位、地址、邮编及英文关键词)，并在首页地脚处注明第一作者简介(包括出生年.性别、籍贯、职称、学位、从事的研究方向)。

(4)物理量的符号和单位必须符合国家标准、国际标准，文中的各种符号，单位、脚标及大小写均要书写清楚，容易混淆的外文字母、符号，请用铅笔注明。

(5)文图、表应有中英文图题和表题，小图宽度不大于于75mm，大图宽度120~150mm，插图的纵、横坐标的标目(物理量的符号和单位)要齐全，表格应采用三线表。