科学杂志投稿邮件格式

尊敬的编辑先生/女士：
您好！
本人受所有作者委托，在此提交完整的论文《低铝硅比铝土矿降铁、脱硅试验研究》，希望能够在《化工矿物与加工》杂志发表，并且代表所有作者郑重申明：（1）论文成果属于原创，享有自主知识产权，不涉及保密问题；（2）相关内容未曾以任何语种在国内外公开发表过，没有一稿多投行为；（3）今后关于论文内容及作者的任何修改，均由本人负责通知其他作者知晓。

本人对上述各项负完全责任。

论文的主要内容简介：
以某地铝土矿为研究对象，为了实现低铝硅比铝土矿降铁、降硅的目的，通过试验研究确定采用磁选和浮选联合工艺流程，试验研究获得较好的工艺指标。

原矿铝硅比为3.28，磁选和浮选联合工艺流程获得的选矿指标为铝土矿精矿铝硅比为9.07，Al2O3的回收率为51.66%，精矿中铁的含量为
1.9%。

本论文的创新点在于：
采用磁选和浮选联合工艺流程，试验研究获得较好的工艺指标，实现低铝硅比铝土矿降铁、降硅的目的
非常感谢您审阅本论文，期待早日收到专家的审查意见。

若对于本论文有任何疑问，请及时与我联系。

遵照《中华人民共和国著作权法》，作者同意将该文版权（含各种介质的版权）转让给《化工矿物与加工》编辑部。

编辑部一次性向作者付清稿酬。

此致
敬礼！
投稿人：xx
身份证号：
所有作者姓名：xx ，出生年月：1990-06-20，学历：硕士生，研究方向：矿物分选，联系电话xx，E-mail：xx。

论文投稿邮件,模板篇一：科学杂志投稿邮件格式尊敬的编辑先生/女士：您好！本人受所有作者委托，在此提交完整的论文《低铝硅比铝土矿降铁、脱硅试验研究》，希望能够在《化工矿物与加工》杂志发表，并且代表所有作者郑重申明：（1）论文成果属于原创，享有自主知识产权，不涉及保密问题；（2）相关内容未曾以任何语种在国内外公开发表过，没有一稿多投行为；（3）今后关于论文内容及作者的任何修改，均由本人负责通知其他作者知晓。

本人对上述各项负完全责任。

论文的主要内容简介：以某地铝土矿为研究对象，为了实现低铝硅比铝土矿降铁、降硅的目的，通过试验研究确定采用磁选和浮选联合工艺流程，试验研究获得较好的工艺指标。

原矿铝硅比为，磁选和浮选联合工艺流程获得的选矿指标为铝土矿精矿铝硅比为，Al2O3的回收率为%，精矿中铁的含量为%。

本论文的创新点在于：采用磁选和浮选联合工艺流程，试验研究获得较好的工艺指标，实现低铝硅比铝土矿降铁、降硅的目的非常感谢您审阅本论文，期待早日收到专家的审查意见。

若对于本论文有任何疑问，请及时与我联系。

遵照《中华人民共和国著作权法》，作者同意将该文版权（含各种介质的版权）转让给《化工矿物与加工》编辑部。

编辑部一次性向作者付清稿酬。

此致敬礼！投稿人：xx身份证号：所有作者姓名：xx ，出生年月：1990-06-20 ，学历：硕士生，研究方向：矿物分选，联系电话 xx，E-mail：xx篇二：投稿信投稿信尊敬的编辑先生/女士：您好！本人受所有作者委托，在此提交完整的论文《基于改进粒子群优化算法和混沌神经网络的电力系统负荷预测》，希望能够在《电网技术》杂志发表，并且代表所有作者郑重申明：（1）关于该论文，所有作者均已通读并同意投往贵刊，对作者排序没有异议，不存在利益冲突及署名纠纷；（2）论文成果属于原创，享有自主知识产权，不涉及保密问题；（3）相关内容未曾以任何语种在国内外公开发表过，没有一稿多投行为；（4）今后关于论文内容及作者的任何修改，均由本人负责通知其他作者知晓。

一、最初投稿Cover letterDear Editors:We would like to submit the enclosed manuscript entitled “Paper Title”, which we wish to be considered for publication in “Journal Name”. No conflict of interest exits in the submission of this manuscript, and manuscript is approved by all authors for publication. I would like to declare on behalf of my co-authors that the work described was original research that has not been published previously, and not under consideration for publication elsewhere, in whole or in part. All the authors listed have approved the manuscript that is enclosed.In this work, we evaluated ……(简要介绍一下论文的创新性). I hope this paper is suitable for “Journal Name”.The following is a list of possible reviewers for your consideration:1) Name A E-mail: ××××@××××2) Name B E-mail: ××××@××××We deeply appreciate your consideration of our manuscript, and we look forward to receiving comments from the reviewers. If you have any queries, please don’t hesitate to contact me at the address below.Thank you and best regards.Yours sincerely,××××××Corresponding author:Name: ×××E-mail: ××××@××××二、催稿信Dear Prof. ×××:Sorry for disturbing you. I am not sure if it is the right time to contact you to inquire about the status of my submitted manuscript titled “Paper Title”. (ID: 文章稿号), although the status of “With Editor”has been lasting for more than two months, since submitted to journal three months ago. I am just wondering that my manuscript has been sent to reviewers or not?I would be greatly appreciated if you could spend some of your time check the status for us. I am very pleased to hear from you on the reviewer’s comments.Thank you very much for your consideration.Best regards!Yours sincerely,××××××Corresponding author:Name: ×××E-mail: ××××@××××三、修改稿Cover letterDear Dr/ Prof..（写上负责你文章编辑的姓名，显得尊重，因为第一次的投稿不知道具体负责的编辑，只能用通用的Editors）:On behalf of my co-authors, we thank you very much for giving us an opportunity to revise our manuscript, we appreciate editor and reviewers very much for their positive and constructive comments and suggestions on our manuscript entitled “Paper Title”. (ID: 文章稿号).We have studied reviewer’s comments carefully and have made revision which marked in red in the paper. We have tried our best to revise our manuscript according to the comments. Attached please find the revised version, which we would like to submit for your kind consideration.We would like to express our great appreciation to you and reviewers for comments on our paper. Looking forward to hearing from you.Thank you and best regards.Yours sincerely,××××××Corresponding author:Name: ×××E-mail: ××××@××××四、修改稿回答审稿人的意见（最重要的部分）List of ResponsesDear Editors and Reviewers:Thank you for your letter and for the reviewers’comments concerning our manuscript entitled “Paper Title”(ID: 文章稿号). Those comments are all valuable and very helpful for revising and improving our paper, as well as the important guiding significance to our researches. We have studied comments carefully and have made correction which we hope meet with approval. Revised portion are marked in red in the paper. The main corrections in the paper and the responds to the reviewer’s comments are as flowing:Responds to the reviewer’s comments:Reviewer #1:1. Response to comment: (……简要列出意见……)Response: ××××××2. Response to comment: (……简要列出意见……)Response: ××××××。

当撰写SCI期刊的投稿信时，需要遵循特定的格式和要求。

以下是一个范本。

[Your Address][City, Postal Code][Your Email Address][Date]Editor-in-Chief,[Journal Name][Journal Address]Dear Editor,I am writing to submit our manuscript entitled "Title of Your Paper" for consideration for publication in [Journal Name].The research presented in this manuscript explores [Briefly describe the purpose and significance of your study]. Our study employs [Research Methodology] and yields significant findings in the area of [Field/Area].We believe that the findings of our study hold importance for [Explain the relevance of your research].Enclosed, please find our manuscript and accompanying materials for your review. We confirm that this submission is original work and has not been published elsewhere or under consideration for publication elsewhere.Thank you for considering our submission. We look forward to your response.Sincerely,[Your Name][Your Contact Information]请确保根据目标期刊的要求进行适当的修改和调整，例如在方括号中填入具体信息，并在投稿时注意附上实际的论文稿件和相关材料。

中国科学杂志格式要求
中国科学杂志格式要求是指在提交学术论文或研究成果至
中国科学杂志时需要遵守的一系列规范和格式要求。

这些要求旨在确保文章的可读性和规范性，使其符合学术出版的标准。

中国科学杂志要求文章以中文撰写，并采用标准的汉字和
汉语拼音。

标题应简明扼要，能准确概括文章的主题。

除了标题外，学术论文通常还包括作者姓名、单位、邮件地址等信息，这些信息应该按照特定的格式排列。

文章的正文应该分为引言、方法、结果和讨论等部分，并
在每个部分之间使用适当的标题进行分隔。

引言部分应该简要介绍研究的背景和目的，方法部分应详细描述研究的实验设计和操作步骤，结果部分应以表格、图表或其他形式清晰展示研究结果，讨论部分则对结果进行分析、解释和讨论。

中国科学杂志对参考文献的引用格式也有严格要求。

引用
的文献应按照特定的顺序编号，并在正文中用相应的编号进行标注。

在文末的参考文献部分，应按照特定的格式列出被引用文献的详细信息，包括作者、文章标题、期刊名、出版年份等。

在撰写中国科学杂志的文章时，还要遵循学术道德的要求。

作者应保证所提交的文章原创，并遵守抄袭和学术不端的禁止原则。

中国科学杂志格式要求对于文章的组织结构、文献引用方
式和学术道德都有严格的规定，这些规定目的在于保证文章的质量和规范性，使其达到学术期刊的要求，从而为科学研究提供有效的交流和传播渠道。

欢迎访问大连化物所图书档案信息中心！回到首页Ｎａｔｕｒｅ杂志投稿指南　１．　描述研究工作的格式（Ｆｏｒｍａｔｓ　ｆｏｒ　ｄｅｓｃｒｉｐｔｉｏｎ　ｏｆ　ｒｅｓｅａｒｃｈ）　《Ｎａｔｕｒｅ》杂志反映原始研究工作的主要论文格式是“来信”（　Ｌｅｔｔｅｒｓ　ｔｏ　Ｎａｔｕｒｅ）和“文章”（　Ａｒｔｉｃｌｅｓ）。

　１．１　“来信”（Ｌｅｔｔｅｒｓ　ｔｏ　Ｎａｔｕｒｅ）　是较短的原始研究工作报告，集中反映某一重要发现，它的重要性意味着其他领域的科学家也会对其感兴趣。

这种论文的长度一般不应超过《Ｎａｔｕｒｅ》杂志的２．５个页面，参考文献不应超过３０条。

论文以一个不超过１８０个单词的自然段开头，标明所有必要的参考文献，其读者对象是其他领域的科学家。

这段文字概述研究工作的背景和原理，接下来介绍论文的主要结论，用“Ｈｅｒｅ　ｗｅ　ｓｈｏｗ”或类似的短语来引导。

允许再有一小段引言内容，但其后的正文部分则应仅限于对发现做简短描述，并且只能有一小段的讨论部分。

　１．２　“文章”（Ａｒｔｉｃｌｅｓ） 是反映原始研究工作的报告，其结论代表着人们在理解某一重要问题上所取得的一个实质性进展，许多不同领域的读者都会对其感兴趣。

这类论文的长度一般不超过《Ｎａｔｕｒｅ》杂志５个页面，参考文献不超过５０条。

（一整页文字大约为１３００个单词）。

这类论文有一个不标参考文献的摘要部分，与正文分开，长度最多１５０个单词，其中不含数字、缩写或计量单位，除非确有必要。

同“来信”类论文的开头一段一样，“文章”类论文的这一摘要部分也是对研究工作的背景和原理的简短介绍，随后为用“Ｈｅｒｅ　ｗｅ　ｓｈｏｗ”或类似短语引导的论文的主要结论。

文章本身以长达５００字、标注参考文献的文字开始，对研究工作的背景做进一步介绍（与摘要部分有一些重复是允许的），接下来对研究工作的发现做精练的、集中的分析，最后为一到两段较短的讨论部分。

这类论文应有几个小标题，每个小标题的长度不应超过４０个字符。

et al. Chinese Science Bulletin | Jan 2009 | vol. 54 | no. ? | ?-?1A R T I C L E STitle: Short-term exposure of low-alloyed steels in 1 Qinghai2 Author: LI QiaoXia 1, SUN XiaoLing&WANG ZhenYao 2*3 Units : 1Environmental Corrosion Centre, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China;4 2School of Physics,Peking University, Beijing 100871, China5 Abstract: The rusts formed on carbon steel and weathering steel exposed in Qinghai Salt Lake at-6 mosphere for 6 months were characterized by X-ray diffraction (XRD), infrared transmission spec-7 troscopy (IRS), scanning electron microscopy (SEM), electron probe micro analyzer (EPMA) and elec-8 trochemical polarization techniques. The two kinds of steels showed the similar corrosion rate, corro-9 sion product composition and electrochemical polarization behavior.（摘要中不能出现参考文献序号.）10 Keywords: atmospheric corrosion, carbon steel, weathering steel, XRD, EPM(关键词：5～8个)11 Carbon steel and weathering steel as important structural materials are widely used in buildings, bridges, towers, and 12 vehicles, etc. [1,2]. These equipments are mainly operated under atmospheric environment. Particles and dust in the 13 air often induce the corro14 1 Experimental15 Test specimens were cut from commercially availableQ235 carbon steel and Corten A weathering steel and their 16 compositions are given in Table 1. The coupons(100 mm×50 mm×5 mm) and electrode samples 1718 2 Results and discussion19 All the exposed samples were completely covered by corrosion products after exposure for 6 months[3]. And a rela-20 tively uniform dark brown rust layer was developed on the upward and downward surfaces of weathering 2122 3 Conclusions23 In the early exposure (for 6 months) in salt lake atmosphere, weathering steel and carbon steel showed analogous cor-24 rosion behavior[4-7]. For the same kind of steel, the corrosion degree of upward surface was similar to that of down-25 ward surface. The rusts on both kinds of steels 262728 *Corresponding author (email: )2930313233Table 1Compositions of carbon steel and weathering steel (%)Corten A 0.09 0.3 0.35 0.081 0.005 0.48 0.27 0.28 0.037343536Figure 1Metallographic cross sections of the rusted samples. (a) Upward surface of carbon steel; (b) downward surface of carbon steel.373839Knowledgment40This work was supported by the National Natural Science Foundation of China (51002090) and the Outstanding Young Scientist Research Award Fund of 41Shandong Province (BS2010CL028).42References431Syed S. Atmospheric corrosion of materials. Emirat J Eng Res, 2006, 11: 1―24442Norman I J, Redfern S J. Mental Health Care for Elderly People. New York: Churchill Livingstone, 1996453Polito V S. Calmodulin and calmodulin inhibitors: Effect on pollen germination and tube growth. In: Mulvshy D L, Ottaviaro E, eds. Pollen: Biology 46and Implication for Plant Breeding. New York: Elsevier, 1983. 53–60474Balasubramanian R. Role of nanophase oxides in short-term atmospheric corrosion of structural steels. Dissertation for Doctoral Degree. Norfolk, V A: 48Old Dominion University, 2003. 4495Phillips N A. The Nested Grid Model. NOAA Technical Report NWS22. 1979506Zhang W P. Experiment Apparatus of Diffraction Imaging. China Patent, 02290557.X, 2003-12-03517Wang D L, Zhu J, Li Z K, et al. User Manual for QTKMapper Version 1.6, 19995253注意事项：541. 表格和图件随文中出现顺序编排或统一放在参考文献后;552. 送审稿件的参考文献可以采用“著者年制”也可以采用“顺序编码制”进行编排，但是录用稿件的参考56文献格式应按照“顺序编码制”用阿拉伯数字编排.572 et al. Chinese Science Bulletin | Ja 2009 | vol. 54 | no. ? | ?-?。

nar和nc杂志的投稿格式《NAR》和《NC》是两本知名的科学杂志，它们都有特定的投稿格式要求。

下面我将从多个角度全面回答你关于这两本杂志的投稿格式的问题。

首先，无论是《NAR》还是《NC》，它们都是学术期刊，因此投稿的格式要求相对严格，以确保文章的规范性和可读性。

以下是一般情况下投稿格式的要求：1. 标题和作者信息，首先，文章的标题应该简明扼要地描述研究内容。

作者信息应包括作者的全名、所属机构、邮箱等。

2. 摘要，摘要是文章的简要概述，应包含研究的目的、方法、结果和结论。

摘要通常在文章的开头，长度一般为150-250个字。

3. 关键词，在摘要之后，列出3-5个与研究内容相关的关键词，用于帮助读者快速了解文章的主题。

4. 引言，引言部分应该清楚地阐述研究的背景和目的，指出研究的重要性，并对前人的相关研究进行简要综述。

5. 方法，在方法部分，详细描述研究的实验设计、材料和方法。

确保描述足够详细，使其他研究者能够重复实验。

6. 结果，结果部分应以清晰、简洁的方式呈现实验结果，可以使用表格、图表或图片来支持描述。

同时，结果应该与研究的目的相一致，并进行充分的数据分析和解释。

7. 讨论，在讨论部分，对实验结果进行解释和分析，与前人研究进行比较，并讨论研究的局限性和未来的研究方向。

8. 引用文献，最后，引用文献部分列出所有被引用的文献。

确保按照期刊的引用格式要求进行格式化。

此外，由于《NAR》和《NC》是两本不同的杂志，它们可能会有一些特定的格式要求。

因此，在投稿之前，建议仔细阅读期刊的官方网站或投稿指南，以了解详细的格式要求和投稿流程。

总结起来，投稿《NAR》和《NC》这两本杂志时，你需要按照学术期刊的一般格式要求来组织你的文章，包括标题、作者信息、摘要、关键词、引言、方法、结果、讨论和引用文献。

此外，还要注意特定期刊的格式要求，以确保你的稿件符合其投稿要求。

学术论文投稿信范文科学期刊论文投稿信范本尊敬的编辑：我怀着无比兴奋的心情，将我精心准备的学术论文提交给您的期刊。

我深知您的期刊对学术研究的重视，并且坚信您对优质研究成果的认可也将为我的研究提供有力的支持和广阔的学术影响力。

我所提交的论文题为《XXX》。

该论文旨在探讨XXXXX的XXXXX问题，并从实证研究的角度提出了一种新的视角。

通过对大量数据的搜集和分析，本文试图解析XXXXX，以期为相关领域的研究提供新的理论和实践启示。

首先，本文在引言部分明确了研究问题的重要性，并提出了相应的研究目的和意义。

接着，我们从相关文献综述出发，对已有研究进行批判性评述并指出研究的不足之处，为我们的研究填补了一定的空白。

在方法部分，我们详细介绍我们采取的研究设计、数据收集和分析方法，确保研究的科学性和可靠性。

在结果部分，我们对数据进行了细致的整理和分析，并得出了一系列具有新颖性和可解释性的发现。

这些发现进一步支持了我们的研究假设，并深入揭示了XXXXX问题的本质和研究所面临的挑战。

在讨论部分，我们分析了实证结果，并解释了这些结果对于该领域的学术和实践意义。

同时，我们也对研究方法和数据的局限性进行了充分的讨论，为后续研究提供了一些启示和建议。

最后，在结论中，我们简要总结了本文的研究发现，并展望了进一步的研究方向。

我们相信，该论文的研究意义和学术价值会引起广大读者的兴趣和关注，并推动相关领域的学术进展。

再次感谢您抽出宝贵的时间审阅本文。

我们深信，这篇论文将为您的期刊增添新的学术价值，同时我们也期待着与您在未来的学术交流中建立深厚的合作关系。

谢谢！敬上XXXXX(作者名)所属机构。

一、最初投稿Cover letterDear Editors:We would like to submit the enclosed manuscript entitled “Paper Title”, which we wish to be considered for publication in “Journal Name”. No conflict of interest exits in the submission of this manuscript, and manuscript is approved by all authors for publication. I would like to declare on behalf of my co-authors that the work described was original research that has not been published previously, and not under consideration for publication elsewhere, in whole or in part. All the authors listed have approved the manuscript that is enclosed.In this work, we evaluated ……(简要介绍一下论文的创新性). I hope this paper is suitable for “Journal Name”.The following is a list of possible reviewers for your consideration:1) Name A E-mail: ××××@××××2) Name B E-mail: ××××@××××We deeply appreciate your consideration of our manuscript, and we look forward to receiving comments from the reviewers. If you have any queries, please don’t hesitate to contact me at the address below.Thank you and best regards.Yours sincerely,××××××Corresponding author:Name: ×××E-mail: ××××@××××二、催稿信Dear Prof. ×××:Sorry for disturbing you. I am not sure if it is the right time to contact you to inquire about the status of my submitted manuscript titled “Paper Title”. (ID: 文章稿号), although the status of “With Editor”has been lasting for more than two months, since submitted to journal three months ago. I am just wondering that my manuscript has been sent to reviewers or not?I would be greatly appreciated if you could spend some of your time check the status for us. I am very pleased to hear from you on the reviewer’s comments.Thank you very much for your consideration.Best regards!Yours sincerely,××××××Corresponding author:Name: ×××E-mail: ××××@××××三、修改稿Cover letterDear Dr/ Prof..（写上负责你文章编辑的姓名，显得尊重，因为第一次的投稿不知道具体负责的编辑，只能用通用的Editors）:On behalf of my co-authors, we thank you very much for giving us an opportunity to revise our manuscript, we appreciate editor and reviewers very much for their positive and constructive comments and suggestions on our manuscript entitled “Paper Title”. (ID: 文章稿号).We have studied reviewer’s comments carefully and have made revision which marked in red in the paper. We have tried our best to revise our manuscript according to the comments. Attached please find the revised version, which we would like to submit for your kind consideration.We would like to express our great appreciation to you and reviewers for comments on our paper. Looking forward to hearing from you.Thank you and best regards.Yours sincerely,××××××Corresponding author:Name: ×××E-mail: ××××@××××四、修改稿回答审稿人的意见（最重要的部分）List of ResponsesDear Editors and Reviewers:Thank you for your letter and for the reviewers’comments concerning our manuscript entitled “Paper Title”(ID: 文章稿号). Those comments are all valuable and very helpful for revising and improving our paper, as well as the important guiding significance to our researches. We have studied comments carefully and have made correction which we hope meet with approval. Revised portion are marked in red in the paper. The main corrections in the paper and the responds to the reviewer’s comments are as flowing:Responds to the reviewer’s comments:Reviewer #1:1. Response to comment: (……简要列出意见……)Response: ××××××2. Response to comment: (……简要列出意见……)Response: ××××××。