当前位置：文档之家 › alc887数据手册_引脚图_参数

alc887数据手册_引脚图_参数

  • 格式：pdf
  • 大小：506.26 KB
  • 文档页数：15
4.1. ANALOG INPUT/OUTPUT UNIT .....................................................................................................5
5. Pin Assignments ....................................................................................................... 6
REVISION HISTORY
Revision 0.1 0.11 0.2 0.21 0.22
Release Date 2009/11/05 2009/12/8 2010/01/28 2010/02/01 2010/07/21
Summary First release. Update part number at Section 13 – Ordering Information. Update IC marking. Update DVDD and built-in LDO output voltage range. Add ALC887-VD2-CG in the Ordering Information.
7. High Definition Audio Link Protocol .................................................................... 11
7.1. LINK SIGNALS ...........................................................................................................................11
7.1 Channel High Definition Audio Codec
ii
With Two Independent S/PDIF Output
Rev. 0.22
ALC887-VD Datasheet
Table of Contents
1. General Description ................................................................................................. 1
DISCLAIMER
Realtek provides this document “as is”, without warranty of any kind, neither expressed nor implied, including, but not limited to, the particular purpose. Realtek may make improvements and/or changes in this document or in the product described in this document at any time. This document could include technical inaccuracies or typographical errors.
7.2. FRAME COMPOSITION ................................................................................................................13
7.2.1. Outbound Frame – Single SDO............................................................................................................................13 7.2.2. Outbound Frame – Multiple SDOs.......................................................................................................................15 7.2.3. Inbound Frame – Single SDI ................................................................................................................................16 7.2.4. Inbound Frame – Multiple SDIs ...........................................................................................................................16 7.2.5. Variable Sample Rates..........................................................................................................................................17
2. Features .................................................................................................................... 2
2.1. HARDWARE FEATURES ................................................................................................................2 2.2. SOFTWARE FEATURES..................................................................................................................3
7.1.1. Signal Definitions .................................................................................................................................................12 7.1.2. Signaling Topology ...............................................................................................................................................13
USING THIS DOCUMENT
This document is intended for the hardware and software engineer’s general information on the Realtek ALC887-VD Ics.
Though every effort has been made to ensure that this document is current and accurate, more information may have become available subsequent to the production of this guide. In that event, please contact your Realtek representative for additional information that may help in the development process.
3. System Applications ................................................................................................. 3
4. Block Diagram.......................................................................................................... 4
COPYRIGHT © 2010 Realtek Semiconductor Corp. All rights reserved. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of Realtek Semiconductor Corp.
5.1. ALC887-VD...............................................................................................................................6 5.2. VERSION IDENTIFICATION ............................................................................................................6 5.3. ALC887......................................................................................................................................7

合集下载

alc662数据手册_引脚图_参数

alc662数据手册_引脚图_参数


5. PIN ASSIGNMENTS .........................................................................................................................................................6 5.1. PACKAGE AND VERSION IDENTIFICATION ....................................................................................................................6
2.1. HARDWARE FEATURES ................................................................................................................................................2 2.2. SOFTWARE FEATURES..................................................................................................................................................3 2.3. ALC662-VC SERIES UPGRADED FEATURES FOR FUTURE WLP ..................................................................................4
技嘉科技 GA-B75M-D3H 主板说明书

技嘉科技 GA-B75M-D3H 主板说明书

DIRECTORY PackingBrief IntroductionMotherboard Diagram Installation and Settings Installation of Drivers BIOS SettingsRear I/O panel (2)345671113Safety Precautions SAFETY PRECAUTIONSProducts could probably be damaged due to electrostatic discharge(ESD). Please follow these steps below for a success-ful computer assembly.Make sure all parts are firmly connected; otherwise, it might lead to the failure of recognizing components or starting the computer.In order to prevent products from being damaged by ESD, please make sure to discharge your body static by touching other metal objects before taking the motherboard out of box.Hold the border of motherboard when taking it out. Do not touch the sensitive parts of motherboard.Please put the motherboard in an anti-static container or on anti-static pad if not needed.Before turning on the computer, make sure all parts inside the case are firmly connected without any loose screws or metal components.Do not start the computer before installation finished, otherwise it might result in permanent damage to the computer parts or even injury to the user.If you need any assistance in the process of installation, please contact our after-sales customer service or reach us on HUANANZHI official Facebook for professional technical support.Prior to installation or disassembly, please switch off the power and unplug the computer.Liquid penetrated into the computer. Motherboard is exposed to moisture.Keep the motherboard away from moisture.Keep the user manual for future reference.Before plugging the power supply, please make sure the socket provides the corresponding voltage.In any of the following situations, please keep themotherboard and power cable in a safe place. Do not put anything onto the power cable.In the event of any of the following conditions, have the board checked by a service technician:BRIEF INTRODUCTIONFeaturesCPUs supported: Standard LGA2011-3 socketRAM supported: Supporting four channels of DDR4 1866/2133/2400MH z , with standard and ECC memoryI/O attributes： 10*SATA3.0(Max data transmission rate of 6GB/s)4*USB2.0 ports(Extensible 1xUSB2.0 interface in front )4*USB3.0 ports(Extensible 1xUSB3.0 interface in front) 1*M.2 NVME Interface 1*M.2 NGFF Interface1*RJ45 Gigabit Ethernet ports 1*Audio interfaceHD AUDIO sound effect：Supporting 7.1 soundtrack HI-FI audio input/output（ALC887） Providing audio input/microphone/front speaker/rear speaker and side speaker output portAudio output: this is the front speaker output port that stereo speakers or earphones can be plugged intoOnboard NIC: Motherboard has internal RTL8111H network interface cardExpansion slots：3*PCI Express x16 Accelerated Graphics PortMotherboard does not work even if you follow the instructions on user manual.Motherboard fell off to the ground and got damaged. Motherboard has clear signs of damage.PACKINGPlease confirm that the motherboard is properly packaged upon purchase of the product. If there is any damage to packaging or lack of accessories, contact us as soon as possible .1.1*HUANANZHI X99 F8D DUAL motherboard2.2*SATA data cable3.1* User manual4.1*Warranty CardRear I/O PanelUSB2.0USB3.0USB2.0MOTHER BOARD IMAGESATA3.0*6M.2 NGFF SATA3.0*43pin fan interface Gigabit nics(Under)PCIEX16 interfaceM.2 NVME interfaceAUDIOPCIEX16 interfacePCIEX16 interfaceCPU2CPU1DDR4*8Interface8PIN CPU Power Supply24PIN Power Supply8PIN CPU Power SupplyUSB3.0 Interface USB2.0Interface （on）Audio Port4pin fan interface3pin fan interfaceJUSB2.03pin fan interfacePower buttonReset button JUSB3.0Dial the code3pin fan interface 4pin fan interface1-1 X99-F8D motherboard illustrationLANLAN Audio Port1-2 Overall Rear I/O Panel DisplayStatusDescriptionTurn OffNetwork Not Connected Yellow Network Connected FlickerNetwork In UseSpeed SignalStatus DescriptionTurn OffTransmission rate Transmission rate Transmission rate10 Mbps Green 100 MbpsOrange1 GbpsConnection/Work Light1-3 LAN Port Status Table1-4 Audio Port ConfigurationAudio Port Audio InputAudio output/Front speaker outputRear speaker outputCenter/subwoofer output Side speaker output Microphone input Aisle2468PCIEx16PCIEx16PCIEx16135********Power PowerUSB3_RX_DN USB3_RX_DN USB3_RX_DP USB3_RX_DPGroundGroundGroundGround USB2.0-USB2.0-USB2.0+USB2.0+191220USB3_TX_C_DPUSB3_TX_C_DP USB3_TX_C_DNUSB3_TX_C_DN GND 11121314151617181920N.CInstallation And Settingsplease check the motherboard where all pins marked with number “1” or white bold line are position “1”.NOTICE13579246810VCC D-D+GND KEYVCC D-D+GND N.CN.C 109212-1 Clear CMOS Jumper CLR-CMOS2-2 Front Audio Output Ports2-5 USB Extension Interface2-4 PCI Expansion Slot13579246810MIC+KEY L_R_Out L_L_OutGround AuD_Vcc(AVCC)R_Out BackL_Out Back12910Vbias 246810HDD_LED-VCCPWR_LED-VCC RESETRESET PWR_LED-VCC PWR_LED-VCC PWR_SWPWR_SWN.C 219102-5 F_PANEL1 Boot InterfaceKEY2-6 USB3.0 Interface3. 4.5.1.2.XX XX5330°4121232In order to properly place the CPU in the motherboard, the surface of the LGA2011 CPU has two pairs of start-ing points and a golden triangle. Golden triangle indicates Pin12-7 CPU InstallationRemove the screw from the screw base Remove the scre w baseTighten the screw base screwed into the length M.2 module to the M.2 interface distance holeInsert your M.2 module into the M.2 interface at a 30 degree angle Place the screw on the trailing edge notch of your M.2 module and tighten to the screw base2-8 M.2 Interface Installation1.Pull the clips on both ends of the memory slot outward, and the memory strip corresponds to the protruding position of the slot to determine the direction of installa-tion.2.Align the memory module into the slot and press3.Let the snaps on both ends of the slot automatically bounce2-9 Memory Installation��������DIPON1.SATA available��������DIPON2.M.2NGFF available��������DIPON3.SATA/m. 2 NGFF both unavailable��������DIPON4.Do not dial all the code to the ON location, it will cause a short circuitNote :SATA0 3.0 interface and The M.2 NGFF interface only works Dial either one,Not used at the same time2 -10 Instruction of dial - code switch2 -11 Graphics Card Installation3e a screwdriver to remove the bezel and screws on the main unit2.Need to pick up the card slot of the card slot wheninstalling the graphics card 3.Insert the graphics card into the card slot of the graphics card1324.After the installation is in place, the chuck will automatically return to its position.5.Secure the graphics card to the chassis with screws6.Install the power cord5464.1Audio driver installation (take HD Audio series for example)Run "driver disk": /X99 SOUND CARD DRIVER/VISTA-WIN7-R267, take WDW-267 if OS is XPClick on "next"to continue,and then"finished"The system will automatically restart itself to finish the installation4.2 Uninstallation of audio driver(take HD Audio series for example)etting into Windows desktop, choose "setting"/ "con-trol",and then "add/remove programs". Later, choose "Re-altek High Definition Audio Driver" in the menu and click on "computer. The system will automatically search for devices. Installation finished.3.Directx11 driver installationRun driver disk: /Tools/Driverx11/DXSETUP, click on "Iaccept"and then "next" to continue. Click on "finished" and restart computer. The system will automatically search for devices. Installation finished.4.Audio driver installationBefore this installation, please check the model of the audio chip on the motherboard first(you may refer to this manual), Select the proper driver accordingly for installa-tion.Drivers installation1.Drivers listing:2.Intel Chip Information InstallationRun driver disk: X99 chipset driver/INF-X99, click on “yes”andthen“next”to continue. Click on“finished” and restart theDriver Directory Driver DescriptionOperating SystemX99 Chipset Driver Intel chipinformation installation INF_X99Tools\Directx11Directx11 installationDXSETUP X99 Suond Card DriverRealtek series sound card driver installationVista-win7-r267wdwX99 LAN DriverIntel chipNIC installation Win7 XP2 -13 SATA InterfaceSATA3.0SSATA3.05.Driver installation of external video cardRun "driver disk", take Setup.exe, Click on "next"- "yes”-"next"-"next"and"finished"hThe system will automatically search for devices to complete the installation6.Driver installation of networkRun "driver disk": X99 LAN DRIVER/WIN7 XP click on "next"-"installation"- "finished"and restart the computer， and restart the computer，The system will automatically search for devices to complete the installation.BIOS SettingsIn order to enable the computer to work well or execute specific functions, CMOS SETUP normally stores all kinds of data in CMOS SRAM of the motherboard. When the computer is shut down,mother-board `s battery will supply power to CMOS SRAM. When the comput-er is turned on and starts POST(Power On Self Test), press “Delete/Del” key to enter into AMI BIOS CMOS SETUP main page. Motherboard warm boot key is “F7”.add/remove"so thatthe driver will be automatically removed.。

东芝芯片8873

东芝芯片8873

目录一、概述1-1、东芝TMPA8873CSCNG6V56的硬件特性1-2、TV解码1-3、软件实现功能二、端口定义2-1、TMPA887CSCNG6V56引脚定义图2-2、TMPA8873CSCNG6V56系统构成框架图2-3、TMPA8873CSCNG6V56脚位及功能简述三、遥控部分键值表四、按键功能及操作说明4-1、POWER（遥控键开关机键）4-2、TV/A V （TV/A V切换键）4-3、0～9、--（数字键）4-4、POS+、POS-（节目增/减键）4-5、RECALL（回前键）4-6、PIC.MODE(图像模式键)4-7、VOL+、VOL-（音量加/减键）4-8、MUTE（静音键）4-9、SLEEP（关机定时键）4-10、DISPLAY（显示键/童锁键）4-11、MENU（菜单键）4-12、SYSTEM（伴音制式切换键）4-13、AUDIO（单独听键）4-14、SOUND.MODE(音效模式键)4-15、SELECT(书签键)4-16、SCAN(浏览键)4-17、GAME(游戏键)4-18、D-MODE（工厂键）五、软件预置控制、操作及OSD显示描述5-1、OSD风格及菜单5-2、图像菜单5-3、定时菜单5-4、调谐菜单5-5、设定菜单5-6、伴音菜单六、工厂菜单操作方法一、概述TMPA8873CSCNG6V56是日本东芝公司最新开发的二合一彩电专用解码芯片，可应用在14”~29”的机芯上，且具有多种功能扩展，可在单一的PCB主板上实现从简单到高档全系列机芯。

下面是TMPA8873CSCNG7A V2的特性及所具备的功能简介。

1-1、TMPA8873CSCNG6V56的硬件特性1.高速8 bits CPU。

2.用8MHZ晶体，最短指令周期为0.5μs。

3.2-K RAM，48K ROM。

4.12个I/O口。

5.1个14bit PWM输出口。

6.1个7bit PWM输出口。

7.3个8bit A/D转换器。

华擎 H610M-HDV M.2 用户手册说明书

华擎 H610M-HDV M.2 用户手册说明书

126H610M-HDV/M.21.2 规格平台•Micro ATX 规格尺寸•稳固的电容器设计CPU•支持第12代 Intel® Core TM处理器 (LGA1700)•Digi Power design•6电源相设计•支持 Intel® Hybrid Technology•支持 Intel® Turbo Boost Max Technology 3.0芯片集•Intel® H610内存•双通道 DDR4 内存技术•2 x DDR4 DIMM槽•支持DDR4非ECC、非缓冲内存，最高支持频率3200** 请参阅华擎网站上的 Memory Support List（内存支持列表）了解详情。

(/)•支持 ECC UDIMM 内存模块（非 ECC 模式操作）•支持系统内存最大容量： 64GB•支持 Intel® Extreme Memory Profile (XMP) 2.0扩充槽• 1 x PCIe Gen4x16 槽** 支持 NVMe SSD 用作启动盘•2 x PCIe Gen3x1 槽•1 x M.2插槽（E 键），支持2230 型 WiFi/BT PCIe WiFi 模块图形* 只有 GPU 集成的处理器才支持 Intel® UHD Graphics 内置视效和 VGA 输出。

•Intel® X e图形架构 (Gen 12)•3个图形输出选项： D-Sub、HDMI 和 DisplayPort 1.4•支持兼容 TMDS的 HDMI 2.1，60Hz 时最大分辨率达 4K x2K (4096x2160)•支持DisplayPort 1.4，DSC（压缩）最大分辨率可达8K(7680x4320) @ 60Hz / 5K (5120x3200) @ 120Hz•支持 D-Sub，60Hz 时最大分辨率达 1920x1200•支持HDCP 2.3及兼容TMDS的HDMI 2.1以及DisplayPort 1.4端口127音频•7.1 CH 高清音频（Realtek ALC897/887 音频编解码器）•支持电涌保护LAN•Gigabit LAN 10/100/1000 Mb/s•Giga PHY Intel® I219V•支持 Wake-On-LAN（网上唤醒）•支持雷电/ESD 保护•支持高能效以太网 802.3az•支持 UEFI PXE后面板 I/O• 2 x 天线安装点•1 x PS/2 鼠标/键盘端口•1 x D-Sub 端口•1 x HDMI 端口•1 x DisplayPort 1.4•2 x USB 3.2 Gen1 端口（支持 ESD 保护）•2 x USB 2.0 端口（支持 ESD 保护）•1 x RJ-45 LAN 端口，带 LED（ACT/LINK LED 和 SPEEDLED）•高清音频插孔: 线路输入 / 前扬声器 / 麦克风存储• 4 x SATA3 6.0 Gb/s 接口** 如果M2_2被SATA型M.2设备占用，SATA3_3将被禁用。