建筑电气工程针对问题寻求突破保证施工质量在建筑安装工程中，建筑电气工程占有非常重要的地
位，为了保证电气系统的正常，对施工建设中存在的突出问题进行分析研究，并找出防治和预控措施是非常重要的。尤其近年来，电气材料等市场的进一步开放，施工质量面临的问题越来越复杂。本文从工作实际出发，对这些施工中的问题进行总结，提出相应的解决方法。
In the construction and installation engineering, electrical engineering building occupies a very important position, in order to ensure the normal electrical system, analyses the existing problems of construction, and find out the prevention and control measures is very important.
Especiall y in recent years, the further opening up of
electrica l materials market, the construction
qualit
y
problems facing
increasingly complex. In this paper,
starting from the practice, carries on the summary to these problems in the construction, put forward the corresponding solving methods.
科学技术的进步在电力系统中体现在电气设备的巨大变革，各项电力设备的功能不断强大和完善，采用的材料可靠性越来越高，如果依然传承传统的设计理念，采用传统的
施工方法，将会带来很多问题
The progress of science and technology in power system is reflected in the huge transformation of electrical equipment, the equipment functions have been powerful and perfect, and the reliability is higher, if still inherit the traditional design idea, the traditional construction methods, will bring a lot of problems.
对于电缆的架设来说，常常会出现以下一些问题，有一些施工单位为了谋取私利，常常采用劣质的产品，谎报产品；对使用的各种电缆不进行系统性的分类，经常出现电缆的错误使用，由此造成施工现场的混乱，更重要的是为以后的电力运行带来隐患；很多时候电气的电力电缆和仪表电缆混合在一起，造成了各类仪表的测量误差和更为严重的后果。对电缆的终端没有进行有效处理，具体来讲就是没有将电缆的桥架和支架做可靠的固定和接地；在电缆的敷设时，没有设计足够的弯曲半径，在相应位置也没有设置标志牌等。
For cable erection, often there will be some problems, some construction units for personal gain, often use inferior products, false products; on various cable used do not classify system, often the wrong use of cable, resulting in the construction site of the chaos, more important is to bring hidden dangers power
operation for the future; when a lot of electric power cable and instrument cable mixed together, resulting in error of measurement instruments and more serious consequences. Terminal to the cable and no effective treatment, specifically not cable tray and support to do reliable fixation and ground; in the cable laying, not the design of bending radius is sufficient, in the corresponding position have no signs.
在电气施工过程中，很多施工人员的专业素质不强，没有较强
的职业责任感，对图纸的领悟和执行意识不强烈，造成经常不按照图纸的要求施工，或者是没有合理配合其他专业的施工，造成在配电箱盒的时候出现一些问题，比如：配电箱体以及接线盒的坐标出现了明显的偏移，没有按照图纸进行设置；对于灯位和吊扇钩盒没有放置在一排，出现了很大的偏差；没有将柱子内部的箱盒放置整齐，管子口的进箱盒太多，没有可靠牢固的将箱盒安放好，一旦出现振动，就
会使其位移产生偏移。
In the electrical construction process, a lot of construction personnel 's professional quality is not strong, no occupation strong sense of responsibility, not strong on drawings understanding and execution of consciousness, which often not in accordance with the requirements of the construction drawings, or there is
