SAFETY DATA SHEET1. IdentificationProduct number1000004784Product identifier Marvelous Mango Metered Air FreshenerCompany information Sprayway, Inc.1005 S. Westgate DriveAddison, IL 60101 United StatesCompany phone General Assistance 1-630-628-3000Emergency telephone US1-866-836-88551-952-852-4646Emergency telephone outsideUSVersion #01Recommended use Air FreshenerRecommended restrictions None known.2. Hazard(s) identificationFlammable aerosolsCategory 1Physical hazardsSerious eye damage/eye irritationCategory 2AHealth hazardsSpecific target organ toxicity, single exposureCategory 3 narcotic effectsNot classified.Environmental hazardsNot classified.OSHA defined hazardsLabel elementsSignal word DangerHazard statement Extremely flammable aerosol. Causes serious eye irritation. May cause drowsiness or dizziness.Precautionary statementPrevention Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Do not spray on an openflame or other ignition source. Pressurized container: Do not pierce or burn, even after use. Avoidbreathing gas. Wash thoroughly after handling. Use only outdoors or in a well-ventilated area.Wear eye/face protection.Response If inhaled: Remove person to fresh air and keep comfortable for breathing. If in eyes: Rinsecautiously with water for several minutes. Remove contact lenses, if present and easy to do.Continue rinsing. Call a poison center/doctor if you feel unwell. If eye irritation persists: Getmedical advice/attention. Collect spillage.Storage Store in a well-ventilated place. Keep container tightly closed. Store locked up. Protect fromsunlight. Do not expose to temperatures exceeding 50°C/122°F.Disposal Dispose of contents/container in accordance with local/regional/national/international regulations. Hazard(s) not otherwiseNone known.classified (HNOC)Supplemental information None.3. Composition/information on ingredientsMixturesChemical name Common name and synonymsCAS number% Acetone60 - 8067-64-1Butane10 - 20106-97-8CAS number% Chemical name Common name and synonyms74-98-6PropaneOther components below reportable levels 2.5 - 1010 - 20#: This substance has workplace exposure limit(s).*Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret.4. First-aid measuresInhalation Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISONCENTER or doctor/physician if you feel unwell.Skin contact Wash off with soap and water. Get medical attention if irritation develops and persists.Eye contact Rinse with water. Get medical attention if irritation develops and persists.Ingestion Rinse mouth. Get medical attention if symptoms occur.Most importantsymptoms/effects, acute and delayed May cause drowsiness and dizziness. Headache. Nausea, vomiting. Irritation of nose and throat. Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred vision.Indication of immediate medical attention and special treatment needed Provide general supportive measures and treat symptomatically. Keep victim under observation. Symptoms may be delayed.General information Ensure that medical personnel are aware of the material(s) involved, and take precautions toprotect themselves.5. Fire-fighting measuresSuitable extinguishing media Powder. Alcohol resistant foam. Carbon dioxide (CO2).Unsuitable extinguishingmediaDo not use water jet as an extinguisher, as this will spread the fire.Specific hazards arising fromthe chemicalContents under pressure. Pressurized container may explode when exposed to heat or flame.Special protective equipment and precautions for firefighters Firefighters must use standard protective equipment including flame retardant coat, helmet with face shield, gloves, rubber boots, and in enclosed spaces, SCBA.Fire-fighting equipment/instructions Move containers from fire area if you can do so without risk. Containers should be cooled with water to prevent vapor pressure build up. For massive fire in cargo area, use unmanned hose holder or monitor nozzles, if possible. If not, withdraw and let fire burn out.Specific methods Use standard firefighting procedures and consider the hazards of other involved materials. Movecontainers from fire area if you can do so without risk. Use water spray to cool unopenedcontainers. In the event of fire and/or explosion do not breathe fumes.General fire hazards Extremely flammable aerosol.6. Accidental release measuresPersonal precautions, protective equipment and emergency procedures Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Keep out of low areas. Wear appropriate protective equipment and clothing during clean-up. Avoid breathing gas. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Ventilate closed spaces before entering them. Local authorities should be advised if significant spillages cannot be contained. For personal protection, see section 8 of the SDS.Methods and materials for containment and cleaning up Refer to attached safety data sheets and/or instructions for use. Eliminate all ignition sources (no smoking, flares, sparks, or flames in immediate area). Keep combustibles (wood, paper, oil, etc.) away from spilled material. Stop leak if you can do so without risk. Move the cylinder to a safe and open area if the leak is irreparable. Isolate area until gas has dispersed. Prevent entry into waterways, sewer, basements or confined areas. For waste disposal, see section 13 of the SDS.Environmental precautions Avoid release to the environment. Inform appropriate managerial or supervisory personnel of allenvironmental releases. Prevent further leakage or spillage if safe to do so. Avoid discharge intodrains, water courses or onto the ground.7. Handling and storagePrecautions for safe handling Pressurized container: Do not pierce or burn, even after use. Do not use if spray button is missingor defective. Do not spray on a naked flame or any other incandescent material. Do not smokewhile using or until sprayed surface is thoroughly dry. Do not cut, weld, solder, drill, grind, orexpose containers to heat, flame, sparks, or other sources of ignition. All equipment used whenhandling the product must be grounded. Do not re-use empty containers. Avoid breathing gas.Avoid contact with eyes. Avoid prolonged exposure. Use only in well-ventilated areas. Wearappropriate personal protective equipment. Avoid release to the environment. Observe goodindustrial hygiene practices.Conditions for safe storage, including any incompatibilities Level 3 Aerosol.Store locked up. Pressurized container. Protect from sunlight and do not expose to temperatures exceeding 50°C/122 °F. Do not puncture, incinerate or crush. Do not handle or store near an open flame, heat or other sources of ignition. This material can accumulate static charge which may cause spark and become an ignition source. Refrigeration recommended. Store away from incompatible materials (see Section 10 of the SDS).8. Exposure controls/personal protectionOccupational exposure limitsUS. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000)Value Components TypePEL2400 mg/m3 Acetone (CAS 67-64-1)1000 ppmPEL1800 mg/m3 Propane (CAS 74-98-6)1000 ppm US. ACGIH Threshold Limit ValuesValue Components TypeSTEL750 ppm Acetone (CAS 67-64-1)TWA500 ppmSTEL1000 ppm Butane (CAS 106-97-8)US. NIOSH: Pocket Guide to Chemical HazardsValue Components TypeTWA590 mg/m3 Acetone (CAS 67-64-1)250 ppmTWA1900 mg/m3 Butane (CAS 106-97-8)800 ppmTWA1800 mg/m3 Propane (CAS 74-98-6)1000 ppm Biological limit valuesACGIH Biological Exposure IndicesValueComponents Determinant Specimen Sampling Time50 mg/l Acetone Urine*Acetone (CAS 67-64-1)* - For sampling details, please see the source document.Appropriate engineering controls Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level. Provide eyewash station.Individual protection measures, such as personal protective equipmentEye/face protection Wear safety glasses with side shields (or goggles).Hand protection Wear appropriate chemical resistant gloves.Skin protectionOther Not available.Respiratory protection If permissible levels are exceeded use NIOSH mechanical filter / organic vapor cartridge or anair-supplied respirator.Thermal hazards Wear appropriate thermal protective clothing, when necessary.General hygiene considerations When using do not smoke. Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants.9. Physical and chemical properties AppearancePhysical state Gas.Form Aerosol.Color Not available.Odor Not available.Odor threshold Not available.pH Not available.Melting point/freezing point Not available.Initial boiling point and boilingrange132.89 °F (56.05 °C) estimatedFlash point-156.0 °F (-104.4 °C) Propellant estimatedEvaporation rate Not available.Flammability (solid, gas)Not available.Upper/lower flammability or explosive limitsFlammability limit - lower(%)1.9 % estimatedFlammability limit - upper(%)9.5 % estimatedExplosive limit - lower (%)Not available.Explosive limit - upper (%)Not available.Vapor pressure55 psig @70F estimatedVapor density Not available.Relative density Not available.Solubility(ies)Solubility (water)Not available.Partition coefficient(n-octanol/water)Not available.Auto-ignition temperature Not available.Decomposition temperature Not available.Viscosity Not available.Other informationSpecific gravity0.71 @70F estimated10. Stability and reactivityReactivity The product is stable and non-reactive under normal conditions of use, storage and transport. Chemical stability Material is stable under normal conditions.Possibility of hazardousreactionsHazardous polymerization does not occur.Conditions to avoid Avoid temperatures exceeding the flash point. Contact with incompatible materials. Incompatible materials Acids. Strong oxidizing agents. Nitrates. Fluorine. Chlorine.Hazardous decompositionproductsNo hazardous decomposition products are known.11. Toxicological informationInformation on likely routes of exposureIngestion Expected to be a low ingestion hazard.Inhalation May cause drowsiness and dizziness. Headache. Nausea, vomiting. Narcotic effects. Prolongedinhalation may be harmful.Skin contact No adverse effects due to skin contact are expected.Eye contact Causes serious eye irritation.Symptoms related to the physical, chemical and toxicological characteristics May cause drowsiness and dizziness. Headache. Nausea, vomiting. Irritation of nose and throat. Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred vision.Information on toxicological effectsAcute toxicity Narcotic effects.Test ResultsComponentsSpecies Acetone (CAS 67-64-1)LD50Guinea pig Dermal Acute > 7426 mg/kg, 24 Hours > 9.4 ml/kg, 24 Hours Rabbit> 7426 mg/kg, 24 Hours > 9.4 ml/kg, 24 HoursLC50Rat Inhalation 55700 ppm, 3 Hours 132 mg/l, 3 Hours 50.1 mg/lLD50Rat Oral 5800 mg/kg 2.2 ml/kgButane (CAS 106-97-8)LC50Mouse Inhalation Acute 1237 mg/l, 120 Minutes 52 %, 120 Minutes Rat1355 mg/lPropane (CAS 74-98-6)LC50Mouse Inhalation Acute 1237 mg/l, 120 Minutes 52 %, 120 Minutes Rat1355 mg/l 658 mg/l/4h* Estimates for product may be based on additional component data not shown.Skin corrosion/irritation Not applicable.Serious eye damage/eyeirritationCauses serious eye irritation.Respiratory or skin sensitizationRespiratory sensitizationNot available.Skin sensitization This product is not expected to cause skin sensitization.Germ cell mutagenicity No data available to indicate product or any components present at greater than 0.1% are mutagenic or genotoxic.CarcinogenicityThis product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA.OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050)Not listed.Reproductive toxicityThis product is not expected to cause reproductive or developmental effects.Specific target organ toxicity -single exposureMay cause drowsiness and dizziness.Specific target organ toxicity -repeated exposure Not classified.Aspiration hazard Not likely, due to the form of the product.Chronic effectsProlonged inhalation may be harmful.12. Ecological informationEcotoxicityProductTest ResultsSpeciesMarvelous Mango Metered Air Freshener (CAS Mixture)Aquatic EC50Crustacea 7406.854 mg/l, 48 hours estimated Daphnia LC50Fish 12114.3506 mg/l, 96 hours estimated Fish ComponentsTest ResultsSpeciesAcetone (CAS 67-64-1)Aquatic EC50Crustacea 21.6 - 23.9 mg/l, 48 hours Water flea (Daphnia magna)* Estimates for product may be based on additional component data not shown.LC50Fish4740 - 6330 mg/l, 96 hoursRainbow trout,donaldson trout (Oncorhynchus mykiss)Persistence and degradability No data is available on the degradability of this product.Bioaccumulative potentialNo data available.Partition coefficient n-octanol / water (log Kow)Acetone -0.24Butane 2.89Propane2.36Mobility in soil No data available.Other adverse effectsNo other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation potential, endocrine disruption, global warming potential) are expected from this component.13. Disposal considerationsDisposal instructionsCollect and reclaim or dispose in sealed containers at licensed waste disposal site. Contents under pressure. Do not puncture, incinerate or crush. Do not allow this material to drain into sewers/water supplies. Do not contaminate ponds, waterways or ditches with chemical or used container. Dispose of contents/container in accordance with local/regional/national/international regulations.Local disposal regulations Dispose in accordance with all applicable regulations.Hazardous waste codeThe waste code should be assigned in discussion between the user, the producer and the waste disposal company.US RCRA Hazardous Waste U List: ReferenceAcetone (CAS 67-64-1)U002Waste from residues / unusedproductsDispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner (see:Disposal instructions).Contaminated packagingEmpty containers should be taken to an approved waste handling site for recycling or disposal.Since emptied containers may retain product residue, follow label warnings even after container is emptied. Do not re-use empty containers.14. Transport informationDOTUN1950UN numberAerosols, flammable, (each not exceeding 1 L capacity)UN proper shipping name 2.1ClassTransport hazard class(es)-Subsidiary risk 2.1Label(s)Not applicable.Packing groupRead safety instructions, SDS and emergency procedures before handling.Special precautions for user N82Special provisions 306Packaging exceptions None Packaging non bulk NonePackaging bulkThis product meets the exception requirements of section 173.306 as a limited quantity and may be shipped as a limited quantity.Until 12/31/2020, the "Consumer Commodity - ORM-D" marking may still be used in place of the new limited quantity diamond mark for packages of UN 1950 Aerosols. Limited quantities require the limited quantity diamond mark on cartons after 12/31/20and may be used now in place of the "Consumer Commodity ORM-D" marking and both may be displayed concurrently.IATAUN1950UN numberAerosols, flammable UN proper shipping name2.1ClassTransport hazard class(es)-Subsidiary risk2.1Label(s)Not applicable.Packing groupNo.Environmental hazards10L ERG CodeRead safety instructions, SDS and emergency procedures before handling.Special precautions for user Allowed.Passenger and cargoaircraftOther informationAllowed.Cargo aircraft onlyLTD QTY Packaging ExceptionsIMDGUN1950UN numberAEROSOLS UN proper shipping name2.1ClassTransport hazard class(es)-Subsidiary risk2.1Label(s)Not applicable.Packing groupNo.Marine pollutantEnvironmental hazardsF-D, S-U EmSRead safety instructions, SDS and emergency procedures before handling.Special precautions for user LTD QTY Packaging ExceptionsNot applicable.Transport in bulk according toAnnex II of MARPOL 73/78 and the IBC CodeDOTIATA; IMDG15. Regulatory informationUS federal regulations This product is a "Hazardous Chemical" as defined by the OSHA Hazard CommunicationStandard, 29 CFR 1910.1200.All components are on the U.S. EPA TSCA Inventory List.TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D)Not regulated.CERCLA Hazardous Substance List (40 CFR 302.4)Acetone (CAS 67-64-1)Listed.SARA 304 Emergency release notificationNot regulated.OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050)Not listed.Superfund Amendments and Reauthorization Act of 1986 (SARA)Hazard categories Immediate Hazard - YesDelayed Hazard - NoFire Hazard - YesPressure Hazard - NoReactivity Hazard - NoSARA 302 Extremely hazardous substanceNot listed.NoSARA 311/312 HazardouschemicalSARA 313 (TRI reporting)Not regulated.Other federal regulationsClean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) ListNot regulated.Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130)Butane (CAS 106-97-8)Propane (CAS 74-98-6)Not regulated.Safe Drinking Water Act(SDWA)Drug Enforcement Administration (DEA). List 2, Essential Chemicals (21 CFR 1310.02(b) and 1310.04(f)(2) and Chemical Code NumberAcetone (CAS 67-64-1)6532Drug Enforcement Administration (DEA). List 1 & 2 Exempt Chemical Mixtures (21 CFR 1310.12(c)) Acetone (CAS 67-64-1)35 %WVDEA Exempt Chemical Mixtures Code NumberAcetone (CAS 67-64-1)6532US state regulationsUS. Massachusetts RTK - Substance ListAcetone (CAS 67-64-1)Butane (CAS 106-97-8)Propane (CAS 74-98-6)US. New Jersey Worker and Community Right-to-Know ActAcetone (CAS 67-64-1)Butane (CAS 106-97-8)Propane (CAS 74-98-6)US. Pennsylvania Worker and Community Right-to-Know LawAcetone (CAS 67-64-1)Butane (CAS 106-97-8)Propane (CAS 74-98-6)US. Rhode Island RTKAcetone (CAS 67-64-1)Butane (CAS 106-97-8)Propane (CAS 74-98-6)US. California Proposition 65California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This material is not known to containany chemicals currently listed as carcinogens or reproductive toxins.International InventoriesCountry(s) or region Inventory name On inventory (yes/no)*No Australia Australian Inventory of Chemical Substances (AICS)Canada Domestic Substances List (DSL)Yes Canada Non-Domestic Substances List (NDSL)No China Inventory of Existing Chemical Substances in China (IECSC)No Europe European Inventory of Existing Commercial ChemicalNoSubstances (EINECS)No Europe European List of Notified Chemical Substances (ELINCS)Japan Inventory of Existing and New Chemical Substances (ENCS)No Korea Existing Chemicals List (ECL)NoNo New Zealand New Zealand InventoryPhilippines Philippine Inventory of Chemicals and Chemical SubstancesNo(PICCS)Yes United States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory*A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s)A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governingcountry(s).16. Other information, including date of preparation or last revisionIssue date05-25-2015Version #01Disclaimer The information provided in this Safety Data Sheet is correct to the best of our knowledge,information and belief at the date of its publication. The information given is designed only as aguidance for safe handling, use, processing, storage, transportation, disposal and release and isnot to be considered a warranty or quality specification. The information relates only to the specificmaterial designated and may not be valid for such material used in combination with any othermaterials or in any process, unless specified in the text.。
BFV-100-0703 DJ Series Butterfly ValvesKITZ CORPORATION OF AMERICAw w wWELCOME TO OUR WEB SITE!VISIT THE KITZ WEB SITE FOR IMPORTANT INFORMATION:• KITZ Corporate Background - Since 1951!• Product Specifics• Contact Information (worldwide)• Customer Access (MTR printout, etc.)• Technical Data/Catalogs and much more...10750 CORPORATE DRIVE • STAFFORD, TEXAS®10750 CORPORATE DRIVE • STAFFORD, TEXAS BFV-1®A PRODUCT OF TECHNOLOGY®6122E L 200SF12345678LEVER LEVER 5112BL 5112EL 5112VL 6112BL 6112EL 6112VL 5122BL 5122EL 5122VL 6122BL 6122EL 6122VL 5132BL 5132EL 5132VL 6132BL 6132EL 6132VL GEAR GEAR 5112BG 5112EG 5112VG 6112BG 6112EG 6112VG 5122BG 5122EG 5122VG 6122BG 6122EG 6122VG 5132BG5132EG5132VG6132BG6132EG6132VG200 PSI - WAFERSIZES 2″- 12″200 PSI -LUGSIZES 2″- 12″GEAR GEAR 5111BG 5111EG 5111VG 6111BG 6111EG 6111VG 5121BG 5121EG 5121VG 6121BG 6121EG 6121VG 5141BG5141EG5141VG6141BG6141EG6141VG150 PSI - WAFERSIZES 14″- 24″150 PSI -LUGSIZES 14″- 24″{{{{{{{{10750 CORPORATE DRIVE • STAFFORD, TEXASBFV-2®GENERAL TERMS AND CONDITIONSACCEPTANCEAll quotations are for acceptance within 30 days from date of quota-tion unless extended in writing. In the event a purchase order is placed after this time, the Seller’s company reserves the right to requote prices of all valves offered. All orders and contracts are subject to credit approval and acceptance by KITZ.FREIGHTAll materials will be shipped F.O.B.point of shipment – no freight allowance unless otherwise stated and agreed upon with the Buyer.PRICESThere will be added to all prices quoted any sales, excise, or similar tax which Seller may be required to collect on or in connection with the sale. Seller reserves the right to can-cel any order in the event that selling prices shall be established by Federal, State or other governmental regulation with respect to the prod-ucts covered by the order which shall be lower than the prices specified in the order.ESCALATION TERMSPrices shown in this price schedule reflect the costs in effect at the time of publication. These prices will remain firm on all products with a quoted delivery of twenty six (26)weeks or less. On products with a quoted delivery of more than 26weeks, the Seller has a right to price and invoice at the applicable price sheet in effect at the time of ship-ment. In no event will the invoiced price be less than price originally quoted.DEFERRED SHIPMENTSIf for any reason the Buyer desires to delay shipments more than 30 days after manufacturing or to place a hold or to stop the order during the manufacturing cycle, the Seller’s company reserves the right to con-sider the order cancelled and to invoke cancellation charges.CREDIT TERMSAs quoted. Overdue balances will be subject to 1.5% service charge per month on such indebtedness.DELIVERIESShipments made to the Buyer shall at all times be subject to the approval of Seller’s Credit Department. All schedules of shipments are estimated as closely as possible and Seller will use its best effort to ship within the time schedule but does not guarantee to do so. Seller shall not be liable for any direct, indirect, or consequential damage or loss caused by delay in delivery, regardless of the cause of delay. Items offered from stock are subject to prior sale.RETURNSNo returns are allowed without prior arrangements made with the Seller.Product considered for return must be in new, resalable condition and of current design.WARRANTYSeller will replace without charge or refund the purchase price of products manufactured by Seller which prove to be defective in material or work-manship, provided in each case that the product is properly installed and is used in the service for which Seller recommends it and that written claim, specifying the alleged defect,is presented to the Seller within one year from the date of shipment.Seller shall in no event be responsi-ble for claims of A) labor, expenses,or other damages occasioned by defective parts or products or for B)consequential or secondary damages.The Warranty stated in this para-graph is in lieu of all other war-ranties, either expressed or implied. With respect to war-ranties, this paragraph states Buyer’s exclusive remedy and Seller’s exclusive liability.DESIGNBecause of a policy of continuous product improvement, Seller reserves the right to change design,materials or specifications without notice. There will be a charge for modifying an order after it has been entered when such change or modifi-cation results in additional engineer-ing or clerical work for either KITZ or its suppliers.NOTEKITZ reserves the right to correct any obvious clerical errors in quo-tations, invoices and other contracts.200 PSI LUGDuctile Iron Body • Extended NeckDISC:DI • AB • 316SS LINER: NBR • EPDM • FKMSIZE: 2″- 8″Code # 6112(B/E/V)(L/G)Code # 6122(B/E/V)(L/G)Code # 6132(B/E/V)(L/G)200 PSI LUGDuctile Iron Body • Extended NeckDISC:DI • AB • 316SS LINER: NBR • EPDM • FKMSIZE: 10″- 12″Code # 6112(B/E/V)G Code # 6122(B/E/V)G Code # 6132(B/E/V)G 150 PSI LUGDuctile Iron Body • Extended NeckDISC:DI • AB • 316SS LINER: NBR • EPDM • FKMSIZE: 14″- 24″Code # 6111(B/E/V)G Code # 6121(B/E/V)G Code # 6141(B/E/V)G150 PSI WAFERDuctile Iron Body • Extended NeckDISC:DI • AB • 316SS LINER: NBR • EPDM • FKMSIZE: 14″- 24″Code # 5111(B/E/V)G Code # 5121(B/E/V)G Code # 5141(B/E/V)G 200 PSI WAFERDuctile Iron Body • Extended NeckDISC:DI • AB • 316SS LINER: NBR • EPDM • FKMSIZE: 10″- 12″Code # 5112(B/E/V)G Code # 5122(B/E/V)G Code # 5132(B/E/V)G GATE CLASS 125 BRONZE Screw-In Bonnet • Non-Rising StemSolid Wedge Disc10750 CORPORATE DRIVE • STAFFORD, TEXAS BFV-3®DJ SERIES BUTTERFLY V ALVES ILLUSTRATED INDEX NUMERICALINDEXCODE #PAGE 2~8″5112 ...................BFV-5-65122 ...................BFV-5-65132 ...................BFV-5-66112....................BFV-5-66122....................BFV-5-66132....................BFV-5-610~12″5112 .......................BFV-75122 .......................BFV-75132 .......................BFV-76112........................BFV-76122........................BFV-76132........................BFV-714~24″5111 .......................BFV-95121 .......................BFV-95141 .......................BFV-96111........................BFV-96121........................BFV-96141........................BFV-9200 PSI WAFERDuctile Iron Body • Extended NeckDISC:DI • AB • 316SS LINER: NBR • EPDM • FKMSIZE: 2″- 8″Code # 5112(B/E/V)(L/G)Code # 5122(B/E/V)(L/G)Code # 5132(B/E/V)(L/G)DJ SERIES BUTTERFLY V ALVES - ILLUSTRATED INDEXCode # 5112 (B/E/V)L Disc: Ductile Iron (A538 +Code # 5112 (B/E/V)G Code # 6112 (B/E/V)GDisc: Ductile Iron (A538 + Code # 6122 (B/E/V)GCode # 5112 (B/E/V)G Code # 6112 (B/E/V)G10750 CORPORATE DRIVE • STAFFORD, TEXASBFV-10®A PRODUCT OF TECHNOLOGYSpecifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BFV-11Metal Used in the Manufacture of Valvesand Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BFV-12Properties of Valve Material . . . . . . . . . . . . . . . . . . . . .BFV-13Resilient Liner Materials . . . . . . . . . . . . . . . . . . . . . . . .BFV-14Chemical Resistance Chart . . . . . . . . . . . . . . . . . . . . . .BFV-15Flow Data - Cv . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BFV-16Storage/Handling and Installation Guide . . . . . . . . . . .BFV-17Flange Bolt Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BFV-18Ductile Series Butterfly - Exploded View . . . . . . . . . . .BFV-19Locking Lever Data . . . . . . . . . . . . . . . . . . . . . . . . . . . .BFV-20Gear Operator Data . . . . . . . . . . . . . . . . . . . . . . . . . . . .BFV-21Bare Stem Dimensional Datafor Actuation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BFV-22Torque Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BFV-23Cross Reference Chart . . . . . . . . . . . . . . . . . . . . . . . . . .BFV-24®BAHex Head Bolt BoltCStud10750 CORPORATE DRIVE • STAFFORD, TEXASBFV-25®Plumbing ValvesKITZ CORPORATION OF AMERICA BIV-100-00BV-100-0701K-203-08K-204-08K-201-08P-100-1102K-170-06K-150-06KCCGP 0900ITBV0031100ISO 9001 Certified since 1989KITZ CORPORATION OF AMERICA10750 CORPORATE DRIVE • STAFFORD, TEXAS 77477 U.S.A.PHONE (281)491-7333 • TOLL FREE (800)772-0073 • FACSIMILE (281)491-9402Visit our web site at: — Distributed by —CAUTION Pressure-temperature ratings and other performance data publishedin this catalog have been developed from our design calculation, in-house testing , field reports provided by our customers and/or pub-lished official standards or specifications. They are good only to cover typical applications as a general guideline to users of KITZ products introduced in this catalog.For any specific application, users are kindly requested to contact KITZ Corporation for technical advice, or to carry out their own study and evaluation for proving suitability of these products to such an application. Failure to follow this request could result in property damage and/or personal injury, for which we shall not be liable.While this catalog has been compiled with the utmost care, we assume no responsibility for errors, impropriety or inadequacy. Any information provided in this catalog is subject to change without notice for error rectification, product discontinuation, design modifi-cation, new product introduction or any other cause that KITZ Corporation considers necessary. This edition cancels all previous issues.®U!。
Piezoresistive accelerometerModel 728Key featuresThe ENDEVCO®Model 728 is a rugged damped piezoresistive accelerometer designed for shock measurements in mobile consumer electronic devices and other shock measurements requiringa lightweight, adhesive mount accelerometer. The highly efficient sensing system of the 728 is sculptured from a single chip of silicon. Weighing in at 0.5 grams, the extremely small size and unique construction of the element allows exceptionally high resonant frequency. On-chip balance resistors provide low zero measured output and low thermal zero drift. The lightweight Model 728 is designed to be adhesively mounted to the test article with minimal mass loading.•2000 and 10,000 g full scale ranges•Lightweight 0.5 grams •DC response•Gas damped•Adhesive mountPiezoresistive accelerometerModel 728SpecificationsAll specifications assume +75°F (+24°C) and 10 Vdc excitation, unless otherwise specified. Calibration data, traceable to the National Institute of Standards and Technology (NIST), are supplied.Dynamic characteristics Units 2K 10KRange g200010000SensitivityTypical µV/g 200 16Minimum µV/g 140 8ZMO mV ±50 ± 50Frequency response ±1 dB Hz 0 to 8000 0 to 8000Non-linearity%11Thermal zero shift0°C to +70°C (+32° to +158°F) mV 15 5Thermal sensitivity shift0° to +70°C (+32° to +158°F) %/°C 0.2 0.2%/°F 0.1 0.1Transverse sensitivity % 3 3Electrical characteristicsResistanceInput, minimum Ω 700 4000Output, maximum Ω 3000 9000Excitation voltage Vdc 2 to 12 (10 V standard)Isolation resistance mΩ 100 to 50 VdcEnvironmental characteristicsShock limit g 10,000 30,000Temperature rangeOperating 0ºC to +70ºC (32ºF to +158ºF)Storage -40ºC to +85ºC (-40ºF to +185ºF)Humidity IP67Physical characteristicsWeight gram 0.5Case material Hard anodized aluminum alloyCable 4 conductor 32 AWG PVC insulated leads, shielded with black PVC jacket Calibration dataSensitivity g M easured at 1000 g for 2K; at 5000 g for 10KZMO mVInput resistance ΩOutput resistance ΩPiezoresistive accelerometer Model 728ContactENDEVCO T el: +1 (866) ENDEVCO [+1 (866) 363-3826]Notes1. Maintain high levels of precision and accuracy using Endevco’s factory calibration services. Call Endevco’s inside sales force at 866-ENDEVCO for recommended intervals, pricing and turn-around time for these services as well as for quotations on our standard products.Ordering Information1. Model number definition:Cable length in inches (i.e.728-2K-120 has a length of 120 inches)Excitation voltage 10 – 10 Vdc 5 – 5 Vdc 3.3 – 3.3 VdcIndicates full-scale g range 2K – 2000 g 10K – 10000gBasic Model Number728 - XX – EE - ZZZ。
WEATHERMAN WALKINGELAN VALLEYFOEL TOWER41references should you wish to use them.NANTGWYLLT CHURCH6The BBC takes no responsibility for any accident or injury that may occur while following the route. Always wear appropriate clothing and footwear and check weather conditions before heading out.GARREG DDU DAM5DOL Y MYNACH8LONG HOUSE9TURBINE BUILDINGS11CELTIC RAINFOREST7ELAN VALLEY VISITOR CENTRE112DAMBUSTERSDAM10STATUE TO PERCY SHELLEY2CABAN COCH DAM3Tower is wheelchair and pushchair friendly. TheE l a n V a l l e yVisitor Centre in the valleyfor the whole day.Elan Valley Visitor Centre This visitor centre, just a few miles from the pretty market town of Rhayader, was built in 1989, nearly 100 years after work began on flooding the valley and creating a series of reservoirs and dams. Today it is a centre for walkers and cyclists wishing to explore the area. The helpful staff provide information and maps for a number of suggested routes to suit every ability. There’s also a children’s play area.V is it or C en tr eELAN VALLEY VISITOR CENTRE1Percy Shelley, who lived from 1782 -1822.M in er s ’ s ta tu eStatueCaban Coch Dam The path crosses through a viewing area level with the top of the Caban Coch Dam, and it’s a good spot to view the valley and get a feel for how the landscape has changed. Elan is made up of the catchments of two rivers, the Elan and the Claerwen. In Victorian times the area was flooded to supply water to the city of Birmingham – a major industrial city but with desperately poor water supplies and sanitation for the growing population. The valley was flooded, and a series of six dams and reservoirs were built. The cost was high – it involved the loss of the village of Elan, including 18 houses and a church. Work began in 1893 and was completed in 1906, two years after a grand official opening by Edward VII.S to n y s te psCaban Coch DamCABAN COCH DAM3Foel Tower T he tower, with its ornate green roof, was built in a style often described as ‘Birmingham Baroque’. This marks the start of the 52-mile pipeline built to feed the City of Birmingham, 73 miles away, with a clean water supply. Some 360 million litres of water are released to Birmingham daily in a pipeline engineered to carry water by gravity only. Its journey takesthree days to reach Frankley Reservoir. The elegant stone tower houses a system of valves and cylinders which can be raised and lowered hydraulically to draw water off from the reservoir at various depths. This water is then directed into the start of the aqueduct, controlled by valves. Today, water is supplied not only to Birmingham but also to mid and south Wales.A rr ivi ng a t G ar eg D du D amFoel TowerFOEL TOWER4Garreg Ddu Dam The Garreg Ddu dam in the lower Elan Valley is a low, completely submerged dam that keeps a constant water supply by holding water back on the upstream side to extract water at the Foel Tower to allow a gravity feed to Birmingham. It also supports masonry pillars carrying the access roadway to the neighbouring valley of the River Claerwen. The dam really comes into its own during periods of drought when water levels are exceptionally low.Ro ad b rid ge o ve r th e da mGarreg Ddu DamGARREG DDU DAM5A g o o d v ie wNantgwyllt Church T his church was built after the valley was flooded and is one of the smallest functionalchurches in mid-Wales. Among the items of interest are the busts of the engineers who built the dams. Work started on this new church in 1898. The architect also built a nearby village to house the workers who laboured on the dams. When the original church was flooded, some pieces were moved to other churches, but among the few remnants here are the old church oil lamps, which, even today, are the only source of lighting.M ee ti n g th e v ic a rTrying on traditional Welsh hats with local lady ‘Auntie Betty ’NANTGWYLLT CHURCH6Mountain BikingDerek says, “I often go cycling, but when I was in the Elan Valley, I had a chance to try out a mountain bike. The area has become something of a magnet for mountain bikers, and a purpose-built track has been developed on the land behind the church with two levels of difficulty. I tried both, and it was brilliant. There can’t be a better cycle track with a more impressive view anywhere. I must confess though I was given an electric bike to try out. It made getting up those hills much easier, I can promise you!”M ou n ta in b ik in g w it h v ie w sMountain biking in the Elan ValleyCeltic Rainforest (SN 91303 62855)Nature lovers will relish this walk through one of the Celtic Rainforests. Among the things to look out for in this centuries-old woodland are the mosses, lichens, ferns and fungi which grow because of the damp climate and the comparative lack of air pollution. The woods are also rich in birdlife, including the Pied Flycatcher, which returns yearly. If you are lucky, you might also spot a wood warbler, Redstart, Tawny Owl, or Spotted Flycatcher.T h e v ie wCeltic RainforestCELTIC RAINFOREST7Dol y Mynach, the abandoned dam There were plans to build three more dams in the Elan and Claerwen valleys and work started on this one. It was interrupted by two world wars and was never completed. Huge blocks of stone, weighing anything up to ten tons set in concrete which form the solid core of the huge structure, can be seen between the outer faces of masonry.V ie w sDol y Mynach abandoned damDOL Y MYNACH8Long House The large white low-level building is a former long barn. At one time, the farmers and their families would have lived here along with their cattle. Entering the same entranceway, people would have turned in one direction and cattle in another.St on e st ac kLong houseLONG HOUSE9H ig h ro u te v ie w sDambusters Dam (Nant y Gro Dam) Nant y Gro dam was used to practice for the famous Dambusters 617 Squadron attack in World War II. It was a 1:10 scale replica of the Mohne Dam in the Ruhr Valley. In July 1942, a phototype charge was proof tested here. Some 280 lbs of explosives destroyed the central masonry of the dam. Two practice runs were carried out on the Elan Valley dam. When repeated in Germany, the attack was a total success.Nant y Gro DamDAMBUSTERSDAM10Turbine buildings There are stone buildings on either side of the waterway which house electricity-generating turbines, valves and sluices to adjust the amount of compensation water released downstream. These buildings are just downstream of the Caban Coch Dam and crossing the bridge when the water is high is very dramatic with the water cascading over the top of the dam.Ca ba b Co ch R ese rv oirTurbine buildingsTURBINE BUILDINGS11Commemorative Stones Behind the visitor centre, towards the dam, are a collection of commemorative stones, each bearing the name of a community in the former county of Radnorshire. The stone sculpture was installed by Radnorshire in 2000 to mark the millennium. Nearby is a plaque showing the population of those hamlets, villages and towns on 1.1.2000.Commemorative stonesCOMMEMORATIVESTONES12D er ek in th eE la n V a ll eyGroup of cyclistsEnd of the walkDerek says, “Back at the visitor centre, I met up with some fellow walkers and cyclists, and we all agreed that this walk is hard to beat. It has its challenging moments, but the views are just stunning, and there is an established footpath the whole way. The staff at the visitor centre are really helpful so if you forget your map they can oblige.”。
