E4418CORE-V1C-DS

EDS-518E Series14+4G-port Gigabit managed EthernetswitchesFeatures and Benefits•4Gigabit plus14fast Ethernet ports for copper and fiber•Turbo Ring and Turbo Chain(recovery time<20ms@250switches),1RSTP/ STP,and MSTP for network redundancy•RADIUS,TACACS+,MAB Authentication,SNMPv3,IEEE802.1X,MAC ACL, HTTPS,SSH,and sticky MAC-addresses to enhance network security •Security features based on IEC62443•EtherNet/IP,PROFINET,and Modbus TCP protocols supported for device management and monitoring•Fiber Check™—comprehensive fiber status monitoring and warning on MST/ MSC/SSC/SFP fiber ports•Supports MXstudio for easy,visualized industrial network management•V-ON™ensures millisecond-level multicast data and video network recoveryCertificationsIntroductionThe EDS-518E standalone,compact18-port managed Ethernet switches have4combo Gigabit ports with built-in RJ45or SFP slots for Gigabit fiber-optic communication.The14fast Ethernet ports have a variety of copper and fiber port combinations that give the EDS-518E Series greater flexibility for designing your network and application.The Ethernet redundancy technologies Turbo Ring,Turbo Chain,RSTP/STP,and MSTP increase the system reliability and availability of your network backbone.The EDS-518E also supports advanced management and security features.In addition,the EDS-518E Series is designed specifically for harsh industrial environments with limited installation space and high protection level requirements,such as maritime,rail wayside,oil and gas,factory automation,and process automation.Additional Features and Benefits•DHCP Option82for IP address assignment with different policies•Supports EtherNet/IP,PROFINET,and Modbus TCP protocols fordevice management and monitoring•IGMP snooping and GMRP for filtering multicast traffic•Port-based VLAN,IEEE802.1Q VLAN,and GVRP to ease networkplanning•QoS(IEEE802.1p/1Q and TOS/DiffServ)to increase determinism•Port Trunking for optimum bandwidth utilization•Port mirroring for online debugging•Automatic warning by exception through email and relay output•SNMPv1/v2c/v3for different levels of network management•RMON for proactive and efficient network monitoring•Fiber Check™provides a comprehensive fiber Digital DiagnosticMonitoring(DDM)function and event warning on MST/MSC/SSC/SFPfiber ports•Bandwidth management to prevent unpredictable network status•Lock port function for blocking unauthorized access based on MACaddress•Supports the ABC-02-USB(Automatic Backup Configurator)forsystem configuration backup/restore and firmware upgrade SpecificationsInput/Output InterfaceAlarm Contact Channels1,Relay output with current carrying capacity of1A@24VDCButtons Reset buttonDigital Input Channels1Digital Inputs+13to+30V for state1-30to+3V for state0Max.input current:8mA1.Gigabit Ethernet recovery time<50msEthernet Interface10/100BaseT(X)Ports(RJ45connector)EDS-518E-4GTXSFP:14EDS-518E-MM-SC-4GTXSFP/MM-ST-4GTXSFP/SS-SC-4GTXSFP:12All models support:Auto negotiation speedFull/Half duplex modeAuto MDI/MDI-X connectionCombo Ports(10/100/1000BaseT(X)or100/1000BaseSFP+)410/100/1000BaseT(X)Ports(RJ45connector)Auto negotiation speedFull/Half duplex modeAuto MDI/MDI-X connection100BaseFX Ports(multi-mode SC connector)EDS-518E-MM-SC-4GTXSFP Series:2100BaseFX Ports(multi-mode ST connector)EDS-518E-MM-ST-4GTXSFP Series:2100BaseFX Ports(single-mode SC connector)EDS-518E-SS-SC-4GTXSFP Series:2Optical Fiber800Typical Distance4km5km40kmWavelength Typical(nm)13001310TX Range(nm)1260to13601280to1340 RX Range(nm)1100to16001100to1600Optical Power TX Range(dBm)-10to-200to-5 RX Range(dBm)-3to-32-3to-34 Link Budget(dB)1229 Dispersion Penalty(dB)31Note:When connecting a single-mode fiber transceiver,we recommend using anattenuator to prevent damage caused by excessive optical power.Note:Compute the“typical distance”of a specific fiber transceiver as follows:Linkbudget(dB)>dispersion penalty(dB)+total link loss(dB).Standards IEEE802.3for10BaseTIEEE802.3u for100BaseT(X)and100BaseFXIEEE802.3ab for1000BaseT(X)IEEE802.3z for1000BaseSX/LX/LHX/ZXIEEE802.3x for flow controlIEEE802.1D-2004for Spanning Tree ProtocolIEEE802.1w for Rapid Spanning Tree ProtocolIEEE802.1s for Multiple Spanning Tree ProtocolIEEE802.1p for Class of ServiceIEEE802.1Q for VLAN TaggingIEEE802.1X for authenticationIEEE802.3ad for Port Trunk with LACPEthernet Software FeaturesFilter802.1Q VLAN,Port-based VLAN,GVRP,IGMP v1/v2/v3,GMRPIndustrial Protocols EtherNet/IP,Modbus TCP,PROFINET IO Device(Slave)Management LLDP,Back Pressure Flow Control,BOOTP,Port Mirror,DHCP Option66/67/82,DHCPServer/Client,Fiber check,Flow control,IPv4/IPv6,RARP,RMON,SMTP,SNMP Inform,SNMPv1/v2c/v3,Syslog,Telnet,TFTPMIB Ethernet-like MIB,MIB-II,Bridge MIB,P-BRIDGE MIB,Q-BRIDGE MIB,RMON MIBGroups1,2,3,9,RSTP MIBRedundancy Protocols Link Aggregation,MSTP,RSTP,STP,Turbo Chain,Turbo Ring v1/v2Security Broadcast storm protection,HTTPS/SSL,TACACS+,SNMPv3,MAB authentication,Sticky MAC,NTP authentication,MAC ACL,Port Lock,RADIUS,SSH,SMTP with TLS Time Management NTP Server/Client,SNTPSwitch PropertiesIGMP Groups2048MAC Table Size16KMax.No.of VLANs64Packet Buffer Size1MbitsPriority Queues4VLAN ID Range VID1to4094USB InterfaceStorage Port USB Type ALED InterfaceLED Indicators PWR1,PWR2,STATE,FAULT,10/100M(TP port),100M(fiber port),Gigabit combo port,MSTR/HEAD,CPLR/TAILSerial InterfaceConsole Port USB-serial console(Type B connector)DIP Switch ConfigurationDIP Switches Turbo Ring,Master,Coupler,ReservePower ParametersConnection2removable4-contact terminal block(s)Input Current EDS-518E-4GTXSFP Series:0.37A@24VDCEDS-518E-MM-SC-4GTXSFP/MM-ST-4GTXSFP/SS-SC-4GTXSFP:0.41A@24VDC Input Voltage12/24/48/-48VDC,Redundant dual inputsOperating Voltage9.6to60VDCOverload Current Protection SupportedReverse Polarity Protection SupportedPhysical CharacteristicsHousing MetalIP Rating IP30Dimensions94x135x137mm(3.7x5.31x5.39in)Weight1518g(3.35lb)Installation DIN-rail mounting,Wall mounting(with optional kit) Environmental LimitsOperating Temperature Standard Models:-10to60°C(14to140°F)Wide Temp.Models:-40to75°C(-40to167°F) Storage Temperature(package included)-40to85°C(-40to185°F)Ambient Relative Humidity5to95%(non-condensing)Standards and CertificationsSafety UL508,EN60950-1(LVD)EMC EN61000-6-2/-6-4EMI CISPR32,FCC Part15B Class AEMS IEC61000-4-2ESD:Contact:8kV;Air:15kVIEC61000-4-3RS:80MHz to1GHz:10V/mIEC61000-4-4EFT:Power:4kV;Signal:4kVIEC61000-4-5Surge:Power:4kV;Signal:4kVIEC61000-4-6CS:10VIEC61000-4-8PFMFHazardous Locations ATEX,Class I Division2Maritime DNV-GL,LR,ABS,NKPower Substation IEC61850-3,IEEE1613Railway EN50121-4Traffic Control NEMA TS2Shock IEC60068-2-27Freefall IEC60068-2-32Vibration IEC60068-2-6MTBFTime723,953hrsStandards Telcordia(Bellcore),GBWarrantyWarranty Period5yearsDetails See /warrantyPackage ContentsDevice1x EDS-518E Series switchCable1x USB type A male to USB type B male Installation Kit4x cap,plastic,for RJ45port4x cap,plastic,for SFP slotDocumentation1x quick installation guide1x warranty card1x product certificates of quality inspection,Simplified Chinese1x product notice,Simplified ChineseNote SFP modules need to be purchased separately for use with this product.DimensionsOrdering InformationModel Name 10/100BaseT(X)PortsRJ45ConnectorCombo Ports10/100/1000BaseT(X)or100/1000BaseSFP+100BaseFX PortsMulti-Mode,SCConnector100BaseFX PortsMulti-Mode,STConnector100BaseFX PortsSingle-Mode,SCConnectorOperating Temp.EDS-518E-4GTXSFP144–––-10to60°C EDS-518E-4GTXSFP-T144–––-40to75°C EDS-518E-MM-SC-4GTXSFP1242––-10to60°CEDS-518E-MM-SC-4GTXSFP-T1242––-40to75°CEDS-518E-MM-ST-4GTXSFP124–2–-10to60°CEDS-518E-MM-ST-4GTXSFP-T124–2–-40to75°CEDS-518E-SS-SC-4GTXSFP124––2-10to60°CEDS-518E-SS-SC-4GTXSFP-T124––2-40to75°C Accessories(sold separately)Storage KitsABC-02-USB Configuration backup and restoration tool,firmware upgrade,and log file storage tool for managedEthernet switches and routers,0to60°C operating temperatureABC-02-USB-T Configuration backup and restoration tool,firmware upgrade,and log file storage tool for managedEthernet switches and routers,-40to75°C operating temperatureSFP ModulesSFP-1FELLC-T SFP module with1100Base single-mode with LC connector for80km transmission,-40to85°Coperating temperatureSFP-1FEMLC-T SFP module with1100Base multi-mode with LC connector for4km transmission,-40to85°Coperating temperatureSFP-1FESLC-T SFP module with1100Base single-mode with LC connector for40km transmission,-40to85°Coperating temperatureSFP-1G10ALC WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for10km transmission;TX1310nm,RX1550nm,0to60°C operating temperatureSFP-1G10ALC-T WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for10km transmission;TX1310nm,RX1550nm,-40to85°C operating temperatureSFP-1G10BLC WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for10km transmission;TX1550nm,RX1310nm,0to60°C operating temperatureSFP-1G10BLC-T WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for10km transmission;TX1550nm,RX1310nm,-40to85°C operating temperatureSFP-1G20ALC WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for20km transmission;TX1310nm,RX1550nm,0to60°C operating temperatureSFP-1G20ALC-T WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for20km transmission;TX1310nm,RX1550nm,-40to85°C operating temperatureSFP-1G20BLC WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for20km transmission;TX1550nm,RX1310nm,0to60°C operating temperatureSFP-1G20BLC-T WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for20km transmission;TX1550nm,RX1310nm,-40to85°C operating temperatureSFP-1G40ALC WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for40km transmission;TX1310nm,RX1550nm,0to60°C operating temperatureSFP-1G40ALC-T WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for40km transmission;TX1310nm,RX1550nm,-40to85°C operating temperatureSFP-1G40BLC WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for40km transmission;TX1550nm,RX1310nm,0to60°C operating temperatureSFP-1G40BLC-T WDM-type(BiDi)SFP module with11000BaseSFP port with LC connector for40km transmission;TX1550nm,RX1310nm,-40to85°C operating temperatureSFP-1GEZXLC SFP module with11000BaseEZX port with LC connector for110km transmission,0to60°C operatingtemperatureSFP-1GEZXLC-120SFP module with11000BaseEZX port with LC connector for120km transmission,0to60°C operatingtemperatureSFP-1GLHLC SFP module with11000BaseLH port with LC connector for30km transmission,0to60°C operatingtemperatureSFP-1GLHLC-T SFP module with11000BaseLH port with LC connector for30km transmission,-40to85°C operatingtemperatureSFP-1GLHXLC SFP module with11000BaseLHX port with LC connector for40km transmission,0to60°C operatingtemperatureSFP-1GLHXLC-T SFP module with11000BaseLHX port with LC connector for40km transmission,-40to85°Coperating temperatureSFP-1GLSXLC SFP module with11000BaseLSX port with LC connector for500m transmission,0to60°C operatingtemperatureSFP-1GLSXLC-T SFP module with11000BaseLSX port with LC connector for500m transmission,-40to85°Coperating temperatureSFP-1GLXLC SFP module with11000BaseLX port with LC connector for10km transmission,0to60°C operatingtemperatureSFP-1GLXLC-T SFP module with11000BaseLX port with LC connector for10km transmission,-40to85°C operatingtemperatureSFP-1GSXLC SFP module with11000BaseSX port with LC connector for300/550m transmission,0to60°Coperating temperatureSFP-1GSXLC-T SFP module with11000BaseSX port with LC connector for300/550m transmission,-40to85°Coperating temperatureSFP-1GZXLC SFP module with11000BaseZX port with LC connector for80km transmission,0to60°C operatingtemperatureSFP-1GZXLC-T SFP module with11000BaseZX port with LC connector for80km transmission,-40to85°C operatingtemperatureWall-Mounting KitsWK-51-01Wall-mounting kit,2plates,6screws,51.6x67x2mmSoftwareMXview-50Industrial network management software with a license for50nodes(by IP address)MXview-100Industrial network management software with a license for100nodes(by IP address)MXview-250Industrial network management software with a license for250nodes(by IP address)MXview-500Industrial network management software with a license for500nodes(by IP address)MXview-1000Industrial network management software with a license for1000nodes(by IP address)MXview-2000Industrial network management software with a license for2000nodes(by IP address)MXview Upgrade-50License expansion of MXview industrial network management software by50nodes(by IP address)©Moxa Inc.All rights reserved.Updated Aug06,2019.This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc.Product specifications subject to change without notice.Visit our website for the most up-to-date product information.。

处理器
英特尔 Pentium(奔腾) G2020 @ 2.90GHz 英特尔 Pentium(奔腾) D 2.80GHz 英特尔 Celeron(赛扬) 420 @ 1.60GHz 英特尔 Pentium(奔腾) 4 3.06GHz 英特尔 Pentium(奔腾) G2020 @ 2.90GHz 英特尔 Pentium(奔腾) 双核 E5300 @ 2.60GHz 英特尔 Pentium(奔腾) 双核 E5400 @ 2.70GHz 英特尔 Celeron(赛扬) E3500 @ 2.70GHz 英特尔 Pentium(奔腾) 4 2.66GHz 英特尔 Pentium(奔腾) D 3.00GHz 英特尔 Celeron(赛扬) 420 @ 1.60GHz 英特尔 Celeron(赛扬) G530 @ 2.40GHz 英特尔 Pentium(奔腾) 双核 E5300 @ 2.60GHz 英特尔 Celeron(赛扬) 430 @ 1.80GHz 英特尔 Pentium(奔腾) 4 2.66GHz 英特尔 Celeron(赛扬) 420 @ 1.60GHz 英特尔 第二代酷睿 i3-2350M @ 2.30GHz 双核 英特尔 Celeron(赛扬) B830 @ 1.80GHz 双核 英特尔 Celeron(赛扬) E3500 @ 2.70GHz 双核 英特尔 第二代酷睿 i3-2350M @ 2.30GHz 双核 英特尔 Celeron(赛扬) E3500 @ 2.70GHz 双核 英特尔 Celeron(赛扬) B830 @ 1.80GHz 双核 英特尔 第二代酷睿 i3-2350M @ 2.30GHz 双核 英特尔 第三代酷睿 i3-3110M @ 2.40GHz 双核 英特尔 Celeron(赛扬) 430 @ 1.80GHz 英特尔 Celeron(赛扬) 420 @ 1.60GHz AMD Sempron(闪龙) LE-1300 英特尔 Pentium(奔腾) 4 2.66GHz 英特尔 Celeron(赛扬) G530 @ 2.40GHz 英特尔 Celeron(赛扬) E3500 @ 2.70GHz 英特尔 Pentium(奔腾) G2020 @ 2.90GHz 英特尔 Pentium(奔腾) 4 2.66GHz 英特尔 Pentium(奔腾) 4 2.66GHz

P4/P4 EE Notes:•Vmax is the maximum non-operating (failure) voltage.•Regarding the chip's wattage numbers, Intel states: "The [Thermal Design Power] numbers ... reflect Intel's recommended design point and are not indicative ofthe maximum power the processor can dissipate under worst case conditions."•The Estimated Max Power Dissipation numbers are based on the fact that Intel estimates the power dissipation for various software applications and sets theThermal Design Point as the upper limit for how far these applications mightpush the Pentium 4. Intel states: "Processor power dissipation simulationsindicate a maximum application power in the range of 75% of the maximumpower for a given frequency." So the Est Max Power Diss was calculated bydividing the TDP by 75%. However, it's unlikely the CPU will reach itsmaximum power dissipation since the processor will throttle down the CPUspeed as it reaches past certain temperatures. And in the event of acatastrophic cooling failure (i.e. leaving off the heatsink), it would completelyshut down the CPU.•If the on-Die thermal probe reaches approximately 135° C (its catastrophic temperature), the CPU will automatically shut down and "the system bus signalTHERMTRIP# will go active and stay active until the processor has cooleddown and a RESET# has been initiated."•The VR Down design guideline allows a Pentium 4 processor in the 478-pin package to decrease its voltage as amperage increases.•The low wattage Pentium 4 Northwood chips are intended for small form factor systems and are limited to less than 45W maximum power output.•Max Cover Temp (Tc) for Prescott is approximated from the thermal profile given in the datasheet.•Some of the Socket T chips have a PRB (platform requirement bit) set to indicate specific platform requirements (higher amperage and wattage).mobile P4 Notes:•Vmax is the maximum non-operating (failure) voltage.•As Intel states in their docs, the P-4M voltages are simply targets. Vcc is a typical voltage with the minimum being defined by how much current is drawn at thatvoltage.•Regarding the chip's wattage numbers, Intel states: "The [Thermal Design Power] numbers ... reflect Intel's recommended design point and are not indicative ofthe maximum power the processor can dissipate under worst case conditions."•If the on-Die thermal probe reaches approximately 135° C (its catastrophic temperature), the CPU will automatically shut down and "the system bus signalTHERMTRIP# will go active and stay active until the processor has cooleddown and a RESET# has been initiated."•The VR Down design guideline allows a Pentium 4 processor in the 478-pin package to decrease its voltage as amperage increases.Celeron Notes:•Vmax is the maximum non-operating (failure) voltage.•Regarding the chip's wattage numbers, Intel states: "The [Thermal Design Power] numbers ... reflect Intel's recommended design point and are not indicative ofthe maximum power the processor can dissipate under worst case conditions."•If the on-Die thermal probe reaches approximately 135° C (its catastrophic temperature), the CPU will automatically shut down and "the system bus signalTHERMTRIP# will go active and stay active until the processor has cooleddown and a RESET# has been initiated."•The VR Down design guideline allows a Pentium 4 processor in the 478-pin package to decrease its voltage as amperage increases.mobile Celeron Notes:•Vmax is the maximum non-operating (failure) voltage.•Regarding the chip's wattage numbers, Intel states: "The [Thermal Design Power] numbers ... reflect Intel's recommended design point and are not indicative ofthe maximum power the processor can dissipate under worst case conditions."•If the on-Die thermal probe reaches approximately 125° C (its catastrophic temperature), the CPU will automatically shut down and "the system bus signalTHERMTRIP# will go active and stay active until the processor has cooleddown and a RESET# has been initiated."•The VR Down design guideline allows a Pentium 4 processor in the 478-pin package to decrease its voltage as amperage increases.Core 2 Notes:•Vmax is the maximum non-operating (failure) voltage.•Intel states: "Thermal Design Power (TDP) should be used for processor thermal design targets. TDP is not the maximum power that the processor candissipate."Core i7 Notes:•-mobile Core 2 Notes:•THERMTRIP activates at 125C.mobile Core i7 Notes:•.mobile Celeron M Notes:•.mobile Atom Notes:•THERMTRIP activates at 125C.•Vmax is power-up voltage.•Max Core Amperage is recommended design target.•Wattage numbers are with HT enabled.mobile A100 Notes:•.Xeon Notes:•Vmax is the maximum non-operating (failure) voltage.•Regarding the chip's wattage numbers, Intel states: "The [Thermal Design Power] numbers ... reflect Intel's recommended design point and are not indicative ofthe maximum power the processor can dissipate under worst case conditions."•If the on-Die thermal probe reaches approximately 135° C (its catastrophic temperature), the CPU will automatically shut down and "the system bus signalTHERMTRIP# will go active and stay active until the processor has cooleddown and a RESET# has been initiated."•Core voltage varies with the amount of amperage being pulled by the CPU.Which is why the Prestonia's VID voltage (1.5v) is actually higher than it'smaximum rated voltage (the chip will never actually be run at its VID voltageexcept under no-load conditions).•Max Processor Power for the Xeon MP is the "maximum thermal power that can be dissipated by the processor through the integrated heat spreader."•In Sep 2002, electrical numbers for the 2.6 and 2.8GHz Prestonia chips changed.Not sure why. Voltage limits were adjusted slightly downward. Amperage wentup. Wattage decreased and max Tcase went up.•Tcase for the Nocona CPUs is the thermal solution design point (Tcase_maxB), though the TCC on the chip will not allow the processor to exceedTcase_maxA.•For Tulsa chips Icc_Max is based on Vcc_Max loadline.。

D-Link dl2k : D-Link DL2000-based Gigabit Ethernet Adapter
HP hp100 : HP 10/100VG PCLAN (ISA, EISA, PCI)
Intel e100 : Intel PRO/100+ e1000 : Intel PRO/1000 CT/F/GT/MF/MT/T/XF/XT 82543GC/82546EB/82545EM/82540EM/82540EP/82544GC/82544EI/82547EI/82541EI e1000 : 82545GM/82546GB/82541ER/82547GI/82541GI/82541PI/82566MM/82566MC/82566DM/82566DC/82563EB/82564EB/82562 e1000e : 82573L/82572EI/82571EB/82573E/82573V/82567/82574L/82566MM/82566MC e1000e : 82566DM/82566DC/82563EB/82574IT/82583V/82579LM/82579V/82577LC/82577LM e1000e : 82578DC/82578DM/Gigabit CT Desktop Adapter/PRO/1000 PT/PF/I217-LM/V/I218-V/LM/I219 LM/V igb : 82576EB/82576NS/82580EB/82575EB/Gigabit ET/ET2/EF/VT igb : I350-AM4/I350-BT2/I350-AM2/I350-T2/I350-T4/I350-F2/I350-F4 igb : I340-F4I340-T4/I210-AT/I210-IS/I210-IT/I210-T1/I210-AS/I210-CS ixgbe : Intel 10 Gigabit AF DA/AT/AT2/CX4/XF LR/XR/82599EB/82598EB/82599ES/82599EN ixgbe : X540-T1/X540-T2/540-AT2/X520-SR1/X520-SR2/X520-DA2/X520-LR1/X520-DA1/X520-DA4/X520-QDA1/X520-T2 X550BT2/AT/AT2 X550-T1/T2 i40e : Intel 40 Gigabit X710-AM2/XL710-AM1/XL710-AM2/X710-DA2/X710-DA4/XL710-QDA1/XL710-QDA2