3M技术参数

3m467技术参数
3M467是3M公司推出的一种新型的多金属膜技术，由于它的高耐温性能，高电容量，高耐压性能以及低成本，被广泛应用在各种电子设备和装备中。

3M467是3M公司推出的首款高性能的多金属膜电容器，其技术参数特别值得一提，下面简要介绍一下3M467技术参数： 3M467高性能多金属膜电容器具有优良的放电特性，他们能够以高容量放出电荷，因此在放电时不会出现电容器溢出的情况，这对电子设备的使用具有重要的意义。

同时，3M467具有极高的耐高温性能，可在-60℃到+125℃的温度范围内工作，耐压值最高达到100V。

此外，3M467多金属膜电容器采用高质量的材料制造，可用于多种应用场合，具有耐腐蚀，短路保护以及体积小，重量轻等特点，因此深受客户的喜爱，广泛应用于各种电子设备和电子产品中。

3M467多金属膜电容器若要得到最佳效果，在装配过程中有一些技巧要注意，首先，电容器装配完毕后，要检查其连接状况，确定电极和外壳的连接状况。

其次，注意接线的正确性，确保正反极连接正确，以免电路受损，对电子设备造成损害。

最后，装配3M467电容器时，要注意检查电容器以及其它元件之间的可靠性，以保证电路的准确性和可靠性。

3M467多金属膜电容器作为3M公司推出的高性能多金属膜电容器，其特性使它成为电子市场的一个主要的参考设备，广泛应用于电子设备中，用于解决各种电子系统的稳定性问题。

可以说，3M467多金属膜电容器的性能，使它成为电子设备的重要组成部分，它能够在
高温、高压环境中维持稳定的电路性能，给电子设备的使用带来了极大的便利。

3T amper-Indicating Label Material for Dot-Matrix Impact Printing 7380Features•Designed to provide a “void” message in the facestock when removal is attempted.•The compact format of the “void” message permits manufacture of small labels(1/2" x 1-1/4").•3M™Adhesive 320 provides excellent flag resistance.•Durable polyester facestock withstands harsh environments.•55# densified kraft liner assures consistent die cutting.•Dot-matrix impact printable with select ribbons.Construction Facestock Destruct Pattern Adhesive Liner2.3 mil (58 microns)“VOID” 1.0 mil (25 microns)3.2 mil (80 microns)Matte White Polyester#300 “Hi-Strength”55# Densified KraftAcrylicApplication Ideas•Non-transferable labels for use on business forms.•Tamper-indicating labels and seals for over-the-counter drugs and other packagingapplications.3M ™Tamper-Indicating Label Material for Dot-Matrix Impact Printing7380Adheres to the following clean surfaces:Stainless SteelPainted Metal Nylon ABSPolyester Glass Polypropylene HDPE Polycarbonate Proper handling and storage:Clean Substrate:Wet the application surface with a mild solvent such as isopropylalcohol (rubbing alcohol) or heptane and wipe thoroughly. Dry thesurface with a lint free cloth before the solvent evaporates from thesurface.Application Pressure:Sufficient application pressure and dwell time is required to developadhesion to assure “void” message appears both on facestock andsubstrate upon removal or upon attempted removal throughtampering. Higher initial bonds can be achieved through increasedapplication pressure such as firm hand or squeegee pressure.Dwell Time:24 hours at room temperature or 72°F (22°C) before testing.Liner Release:180°peel angle Rate of Removal Grams/Inch N/100 mm 90 inches/minute25 max.0.96Conformability:Semi-rigid, substrate for flat or slightly curved surfaces.*When using solvents, extinguish all ignition sources, including pilot lights, and follow the manufacturer’s precautions and directions for use.Typical PhysicalProperties andPerformanceCharacteristics Note:The following technical information and data should be considered representative or typical only and should not be used for specification purposes.Assume all surfaces to which these label materials will be applied are contaminated –metals may be oily or dusty; plastics may be coated with mold release agents, dirt, etc.Any surface contaminant will adversely affect adhesion and the destruct message;therefore, it must be removed prior to application by wiping with a solvent.*- 2 -Chemical Resistance:Bond is secure when exposed to the following:Gasoline– 1 hr. at room temperature Auto Oil–72 hrs. at 120°F (49°C)Weak Alkali– 4 hrs. at room temperature Weak Acid– 4 hrs. at room temperature Freon™TF– 1 hr. at room temperature Water Resistance:Withstands exposure to water at room temperature for 72 hours Temperature Resistance:Withstands exposure from -40°F (-40°C) to 250°F (121°C)Humidity Resistance:Withstands exposure to 90°F (32°C) and 90% RH for 168 hoursEnvironmentalPerformance Note:The following technical information and data should be considered representative or typical only and should not be used for specification purposes.The properties defined are based on adhesion of the label material to stainless steel test surface.Processing Incoming Label Materials:Every slit roll has been tested for the presence of the “void” message. The leading edge of every slit roll is tabbed with a 1-1/2" strip to simulate tampering, thereby indicating that the “void” message is functional on the leading edge of that roll.Thermal Transfer Printing:Caution should be exercised to avoid covering the surface of the label with opaque graphics to the extent that the “void” message is hidden, and the effectiveness of the label or seal is e recommended dot-matrix impact ribbons:CGL-79 from Mid-City ColumbiaRanger 288 from Herbert DeHintonDie Cutting:The compact “void” message permits manufacture of labels as small as 1/2" x 1-1/4"(13mm x 32mm).It is recommended that the converter test for the presence of the “void” message on every roll of labels or seals as the converter processes them, to insure the product quality and consistency. This can be done by laminating a label or seal to an untreated polyester film test surface. The label or seal should be wiped down with a squeegee,allowed to dwell 10 minutes and then removed to observe the presence and functions of the “void” message on both the facestock and the substrate. It is also recommended that the converter test each lot of labels or seals on the actual application surface to assure the function of the “void” message.Dispensing:Care should be taken not to disturb the tamper-indicating feature by pre-destructing the “void” message when manually removing the label from the liner. Slowly remove the liner from the label at a 90°angle. It is recommended that the end user test samples for each roll of labels or seals received from the converter. This should be done by laminating a representative label or seal to the specific application surface to assure its function meets expectations. This test can be run after 10 minutes dwell.However, final judgement should be based on 72 hours dwell at room temperature prior to testing.Application:The tamper-indicating mechanism (i.e. the “void’ message both on the facestock and on the substrate) depends upon adequate adhesion of the label to the substrate.A sufficient bond may not develop on all surfaces due to low surface energy (e.g. Teflon™), contaminated or textured surfaces. Therefore, it is important to determine the suitability of the product in the intended application by carefully pretesting. The primary function of the products is to effect a non-transferable (non-reusable) label or seal by causing the “void” message to appear on the facestock when removal from the substrate is attempted. As a result of the primary function, a “void” message is also transferred to the substrate. This message,transferred to substrate, can be removed by hand rubbing or solvent wiping.- 3 -3M ™Tamper-Indicating Label Material for Dot-Matrix Impact Printing7380- 4 -Printed in U.S.A.©3M 200570-0709-4600-2(8/05)Recycled Paper 40% pre-consumer 10% post-consumer3M ™Tamper-Indicating Label Material for Dot-Matrix Impact Printing 7380Storage Store at room temperature conditions of 72°F (22°C) and 50% R.H.Shelf Life Product retains its performance properties for at least two years from date of manufacture.Processing (continued)Our tamper-indicating product line is designed to indicate tampering by destructingwhen an attempt is made to remove the label. Since no tamper-indicating feature is 100% tamper proof, careful consideration must be taken when designing labels and seals. When the consequences of tampering could be severe, such as injury or loss of human life or significant monetary loss, these products aren’t recommended as the sole means of package or product tamper indication. In these instances, additional methods in combination with the labels should be considered so that the tamper-indicating features are commensurate with the requirements of the application.Scanning:If bar code scanning, the suitability of the printed labels should be evaluated on the actual application substrate. On dark substrates, the label opacity may not be sufficient to provide accurate scanning, especially when using contact scanners.UL Recognized: File numbers are MH16411 for 3M ™Label Material 7380 and MH11410 for 3M ™Label Material 7385. File details can be viewed on UL ’s website at under Certifications. T o locate information for other product numbers, choose the Keyword search option from the Certifications menu and type in the product number.Certification/RecognitionUnless stated otherwise in 3M ’s product literature, packaging inserts or product packaging for individualproducts, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the product. Individual products may have additional or different warranties as stated on product literature,package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED,INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANT ABILITY OR FITNESS FOR A P ARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user ’s application. If the 3M product is defective within the warranty period, your exclusive remedy and 3M ’s and seller ’s sole obligation will be, at 3M ’s option, to replace the product or refund the purchase price.Warranty and Limited Remedy All statements, technical information and recommendations contained in this document are based upontests or experience that 3M believes are reliable. However, many factors beyond 3M ’s control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user ’s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user ’s method of application.Product Use Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theoryasserted, including warranty, contract, negligence or strict liability.Limitation of LiabilityThis Industrial Adhesives and T apes Division product was manufactured under a 3M quality system registered to ISO9001:2000 standards.3Industrial Business Converter Markets Industrial Adhesives and Tapes Division1030 Lake Road Medina, OH 44256-0428800-422-8116 • 877-722-5072 (fax)/converter。

3m467技术参数
3M467是3M公司开发的一种无铅焊料，用于制造电子和汽车零部件，它由胶水和多种金属粉末组成，具有耐高温、耐腐蚀、耐湿度、易焊等优点。

3M467技术参数：
1.材料类型：3M467是一种无铅焊料，由胶水和多种金属粉末组成。

2.温度范围：3M467的熔化温度在250℃-280℃之间，它的熔点在265℃左右，所以它的焊接温度要低于265℃。

3.抗高温性：3M467具有非常好的抗高温性，最高能够承受400℃的短时高温，并且还能维持在300℃的温度条件下长期使用。

4.抗腐蚀性：3M467具有很强的抗腐蚀性，能够很好地抵抗氧化物对电子元器件的侵蚀作用。

5.抗湿度：3M467也具有很好的抗湿度性能，能够很好地保护电子元器件不受潮湿环境影响，从而有效防止短路。

6.易焊性：3M467非常易焊，焊接过程简单方便，不需要经过预处理，易于操作。

7.尺寸：3M467可提供多种不同尺寸的焊料，包括
0.25mm*8mm*40m,0.3mm*14mm*20m等。

8.抗拉力：3M467的抗拉力也非常出色，经过测试，它的抗拉力可达到35N/mm。

9.电阻：3M467的电阻也非常低，仅为4.4μΩ·cm，因此在电子元器件中具有很好的电气性能。

上述是3M467技术参数的详细说明，它在电子和汽车零部件的制造中有着广泛的应用，被认为是非常实用的焊料。

3M DP190胶粘剂的应用和操作：
DP-190半透明胶水是一种半透明的，90分钟长操作时间，良好的剥离和剪切强度。

1、首先要清洁材料表面，再施胶，可以用异丙醇去除油脂等脏物。

2、达到最佳粘接效果，DP-190半透明是卡式胶筒包装，最好使用要和EPX塑料胶枪及混合长管配套使用。

3、操作时间：90分钟，完全固化需要24小时。

注意：施胶没有按照1：1比例混合，或者混合不均匀，会导致粘接强度达不到，或者无法固化等。

（DP190半透明常应用于连接器的封装，防水，防尘）
100%原装正品，价格合理，另有其它型号大量现货！！！！
深圳市焜阳科技有限公司是胶粘剂的专业供应商，代理多家国际知名品牌。

专业经营3M，汉高乐泰（henkel loctite）胶粘剂产品及相关点胶设备，日本阿隆发（aron alpha）系列瞬间胶，意大利乐赛尔（loxeal）系列胶粘剂。

3m425铝箔胶带技术参数
【最新版】
目录
1.3m425 铝箔胶带的概述
2.3m425 铝箔胶带的技术参数
3.3m425 铝箔胶带的应用领域
正文
一、3m425 铝箔胶带的概述
3m425 铝箔胶带，是一种以铝箔为基材，涂覆有压敏胶的胶带。

它具有良好的导热性能、抗腐蚀性和屏蔽性能，被广泛应用于各种工业领域。

二、3m425 铝箔胶带的技术参数
1.材质：铝箔
2.胶粘剂类型：压敏胶
3.厚度：0.025mm
4.宽度：可根据客户需求定制
5.长度：可根据客户需求定制
6.颜色：银色
7.导热性能：优良
8.抗腐蚀性：优良
9.屏蔽性能：优良
三、3m425 铝箔胶带的应用领域
1.电子行业：用于电子产品的散热、绝缘和屏蔽等。

2.汽车行业：用于汽车的隔热、隔音和防震等。

3.建筑行业：用于建筑的隔热、保温和防水等。

4.航空航天：用于航空航天器的隔热、保温和抗压等。

3m4914技术参数
3M4914是一种双面胶带，具有高粘性和高温耐受性。

以下是该产品的技术参数：
1. 尺寸：常见的规格为宽度为19毫米或25毫米，长度为33米。

2. 胶层：该胶带由有机聚合物胶层组成，两面都有胶层。

3. 粘性：该胶带具有非常强的粘性，能够可靠地粘合各种材料，包括金属、塑料、玻璃等。

4. 耐温性：该胶带能够在高温环境下保持稳定的性能，耐受温度范围通常在-30摄氏度到150摄氏度之间。

5. 耐老化性：该胶带具有较好的抗老化性能，能够长时间保持粘性和性能稳定性。

6. 颜色：该胶带通常为透明颜色，但也有其他颜色可选。

请注意，以上是一般的技术参数，具体的参数可能会根据应用需求和产品版本略有不同。

建议您在使用3M4914胶带之前，查阅相关的产品文档或咨询3M公司以获取更准确和详细的技术参数信息。

(Calipers are nominal values.)Facestock Adhesive Liner 2.0 mil (51 micron)0.8 mil (20 micron) 3.2 mil (81 micron)Gloss radiant white polyester#300 Acrylic55# Densified kraft3Thermal Transfer Polyester Label Material7860Features• Facestock is topcoated for thermal transfer printing. Resin ribbons arerecommended for optimum durability. The topcoat also provides improved ink anchorage for traditional forms of press printing.• #300 adhesive bonds well to a wide variety of substrates including metals, high surface energy (HSE) plastics and low surface energy (LSE) plastics. It is ideal for applications requiring high initial adhesion especially to LSE plastic surfaces.• 55# densified kraft liner assures consistent die cutting.• 3M™Label Material 7860 is UL recognized (File MH16411) and CSA accepted (File 99316). See the UL and CSA listings for details.Application Ideas • Barcode labels and rating plates.• Property identification and asset labeling.• Warning, instruction, and service labels for durable goods.• Nameplates for durable goods.ConstructionFOD#1619page 1 of 5Supersedes May 4, 19933M™Thermal Transfer Polyester Label Material 7860Typical Physical Properties Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Adhesion: 180°peel test procedure is ASTM D 3330.90°peel test procedure is ASTM D 3330 modified for the angle change.Initial Conditioned for 3 Days at Room(10 Minute Dwell/RT)T emperature 72°F (22°C)180°Peel90°Peel180°Peel90°Peel Surface Oz./In.N/100 mm Oz./In.N/100 mm Oz./In.N/100 mm Oz./In.N/100 mm Stainless Steel5661424667734650 Polycarbonate5967444861674650 Polypropylene5358384256613842 Glass6066424671784852 HD Polyethylene3538283140442831LD Polyethylene3235252742463437Conditioned for 3 Days at Conditioned for 24 hours at 90°F120°F (49°C)(32°C) at 90% Relative Humidity180°Peel90°Peel180°Peel90°Peel Surface Oz./In.N/100 mm Oz./In.N/100 mm Oz./In.N/100 mm Oz./In.N/100 mm Stainless Steel7077505568745358 Polycarbonate3033171955603639 Polypropylene5459424666724448 Glass7077505567734448 HD Polyethylene4044293245493235LD Polyethylene910101136393033 Liner Release: 180°Removal of Liner from FacestockRate of Removal Grams/Inch Width N/100 mm90 inches/minute140.54300 inches/minute180.69FOD#1619page 2 of 5Environmental Performance The properties defined are based on four hour immersions at room temperature (72°F/22°C) unless otherwise noted. Samples were applied to stainless steel panels 24 hours prior to immersion and were evaluated one hour after removal from the solution for peel adhesion. Adhesion measured at 180°peel angle (ASTM D 3330) at 12 inches/minute.Chemical Resistance:Adhesion to Stainless Steel Appearance Edge Penetration Chemical Oz./in.N/100 mm Visual Millimeters Isopropyl Alcohol6066No change0.8Detergent(1% Alconox®*)6470No change0Engine Oil (10W30)@ 250°F (121°C)6470No change1Water for 48 hours6672No change0pH 46571No change0pH 106470No change0409®* Cleaningsolution6470No change0 Toluene3336No change 6.5 Acetone4751No change 4.3 Brake Fluid7481No change0 Gasoline3639No change 5.8 Diesel Fuel6268No change1 Mineral Spirits5459No change 2.4 Hydraulic Fluid6672No change0T emperature Resistance:300°F (149°C) for 24 hours: no significant visual change0.75% MD shrinkage0.9% CD shrinkage-40°F (-40°C) for 3 days: no significant visual change Humidity Resistance:24 hours at 100°F (38°C) and 100% relative humidity: no significant change inappearance or adhesion Accelerated Aging:ASTM D 3611: 96 hours at 150°F (65°C) and 80% relative humidityRate of Removal Grams/Inch Width N/100 mm 180°Removal of Liner90 inches/minute160.62 from FacestockRate of Removal Oz./In. Width N/100 mm 180°Peel Adhesion 12 inches/minute5459 from Stainless SteelShelf Life Two years from date of manufacture of product when properly storedat 72°F (22°C) and 50% relative humidity.Agency Listing Information Thermal Transfer PrintingPrinter: UL no longer requires evaluation and listing of specific printers.*Ink Ribbon/UL Recognized ComponentsAdvent: 301 Black; 303 Black; 501 Black; 501 Red; 501 Blue; 501 Green Armor: AXR-7; AXR-7+; AXR-600Astromed™: R5CP™: 5440 Red; 5640 Blue; 5940 BlackDasco: DR-74; DR-84Great Ribbon: SDRICS: ICS-CC-4099.1Iimak™: SH-36; SP-330; PrimeMarkIntermec: 053258-2; 054048-4Japan Pulp and Paper: JP Resin 1; JP Resin 2 Blue; JP Resin 2 Red (suitable for indoor use only); JP Resin 2 Green (suitable for indoor use only)Kurz™: K500; K501Markem™: 716 (suitable for indoor use only)Mid City Columbia™: CGL-80; CGL-80HENCR™: Matrix Resin; Matrix; PaceSetter; Promark II; Ultra VPelikan™: T016Ricoh™: B110A; B110C; B110CXSato™: Premier 1Sony™: 4070; 4072; 4075; 4085; 5070; Signature™Series Resin; Signature™Series WaxUBI™: HR03; HR04Zebra™: 5095; 5099; 5100; 51753Industrial Tape and Specialties Division 3M Center, Building 220-7W-03St. Paul, MN 55144-1000USA1 800 362 35501 800 223 7427 Fax On Demand Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product,whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted,including contract, warranty, negligence, or strict liability.Limitation of LiabilityThe 3M product will be free from defects in material and manufacture for a period of one (1) year from the date of manufacture. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS,INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A P ARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF er is responsible fordetermining whether the 3M product is fit for a particular purpose and suitable for user’s method of application. If the 3M product is defective within the warranty period stated above, yourexclusive remedy and 3M’s sole obligation shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.Warranty and Limited RemedyThe technical information and data, recommendations, and other statements provided are based on tests or experience which 3M believes to be reliable, but the accuracy or completeness of such information is not guaranteed.Technical Information and Data Please remember that many factors can affect the use and performance of a 3M product in a particular application. The materials to be bonded with the product, the surface preparation of those materials, the product selected for use, the conditions in which the product is used, and the time and environmentalconditions in which the product is expected to perform are among the many factors that can affect the use and performance of a 3M product. Given the variety of factors that can affect the use and performance of a 3M product, some of which are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s method of application.Product UseSpecial ConsiderationsFor maximum bond strength, the surface should be clean and dry. Typical cleaning solvents are heptane and isopropyl alcohol.****NOTE: When using solvents, read and follow the manufacturer’s precautions and directions for use.For best bonding conditions, application surface should be at room temperature or higher. Low temperature surfaces, below 50°F (10°C), can cause the adhesive to become so firm that it will not develop maximum contact with the substrate. Higher initial bonds can be achieved through increased rubdown pressure.* Trademarks listed are the property of their respective owners.©3M 1999 70-0709-1049-5ProcessingPrinting:Facestock is topcoated for improved ink receptivity and is designed for thermal transfer printing. It is printable by all standard roll processing methods including flexography, hot stamp, letterpress, and screen printing. Refer to the Graphic Ink Selection Guide or call 3M Customer Service at 1-800-223-7427 for additional information.Die Cutting:Rotary die cutting is recommended. Fanfolding of labels is not recommended.Small labels should be evaluated carefully. Winding tensions should be kept at a minimum to help prevent the adhesive from oozing.Packaging:Finished labels should be stored in plastic bags.。

3m465技术参数1. 介绍3m465是一种先进的技术，用于解决特定问题或实现特定功能。

它具有许多令人印象深刻的技术参数，使其成为一种非常有用和强大的工具。

本文将详细介绍3m465的技术参数，以便读者能够更好地了解和利用它。

2. 技术参数一3m465具有出色的性能指标，其中一个重要的技术参数是功率。

功率是衡量3m465输出能力的重要指标。

它表示3m465能够提供的最大输出功率。

这对于许多应用来说非常关键，例如能源供应、电力传输和电动设备。

3m465的功率通常以瓦特（W）为单位进行度量。

另一个重要的技术参数是工作频率。

工作频率是指3m465运行的频率范围。

它表示3m465能够处理的信号频率范围。

这对于许多通信和信号处理应用非常重要。

工作频率通常以赫兹（Hz）为单位进行度量。

3. 技术参数二3m465的另一个重要技术参数是精度。

精度是指3m465在测量、控制或处理过程中的准确性。

它表示3m465的测量结果与实际值之间的差异程度。

精度通常以百分比或小数形式表示。

另一个关键的技术参数是响应时间。

响应时间是指3m465从接收到输入信号到产生输出信号的时间间隔。

它表示了3m465对输入变化的快速响应能力。

较短的响应时间通常意味着更高的性能和更好的实时性能。

4. 技术参数三3m465的第三个重要技术参数是输入和输出电压范围。

输入电压范围是指3m465能够接收的电压范围。

它表示了3m465适用的电源电压范围。

输出电压范围是指3m465能够提供的电压范围。

这对于许多电力和控制应用非常关键。

另一个重要的技术参数是工作温度范围。

工作温度范围是指3m465能够正常工作的温度范围。

它表示了3m465在各种环境条件下的可靠性和稳定性。

5. 技术参数四3m465的第四个重要技术参数是接口类型。

接口类型是指3m465与其他设备或系统进行通信或连接的方式。

常见的接口类型包括USB、RS232、以太网等。

接口类型的选择根据具体应用需求和系统要求来确定。