EIS简要操作说明书

高速打印, 越用越省Epson ME OFFICE 70 桌面型商务打印机助您轻松创业161mm250mm435mm*1 快速经济模式下的A4黑白文档*2 快速经济模式下的A4彩色文档*4使用 ISO/IEC 24712样张测试,所标称页数为近似值。

*3 若使用USB接口，您的电脑必须符合PC98标准并预装Windows98/2000/Me操作系统，若您的电脑是经由Windows95升级至Windows98，则无法连接USB接口打印。

若您使用不合标准的USB电缆或两个以上网络基线器，将可能出现打印错误。

关于使用USB接口的详细要求，请查询您的电脑所附资料。

Epson ME OFFICE 70产品规格打印方式按需喷墨(微压电打印技术)喷嘴数量配置黑色360个，59个×3色(青色、洋红色、黄色)打印方向双向逻辑查找最大分辨率优化5760x1440 dpi (带有智能墨滴变换技术)最小墨滴3微微升打印速度黑色文本(A4) 约38 ppm (经济模式) *1彩色文本 (A4) 约20 ppm (经济模式) *2黑色文本(A4) 约27 ppm (文本模式) *1照片(10x15厘米/4x6英寸)* 约35秒 (经济模式/有边距)约49秒 (经济模式/无边距)约91秒 (照片模式/无边距)* 在EPSON高质量光泽照片纸上打印进纸器容量120页，A4普通纸打印边距支持最大A4无边距打印输入数据缓冲区64KB接口*3高速USB2.0接口噪音水平 5.3 B, 39 dB(A) (ISO7779样张在高质量光泽照片纸/最佳照片模式下打印)电气规格额定电压 AC 220-240V额定频率 50~60 Hz耗电量 大约15W(独立打印，ISO10561 Letter Pattern, 普通纸/文本模式)大约2.0W (睡眠模式)，符合能源之星级别驱动支持的操作系统Windows 2000/XP/XP x64 /Vista/Vista x64 ,Mac OS X 10.2.8 or later捆绑软件EPSON Creativity Suite, EPSON File Manager, EPSON Easy Photo Print,EPSON Attach To Email, EPSON Web-To-Page(仅对于Windows)，Camera RAW Plug-In，在线注册尺寸435(W) x 250(D) x 161(H)mm (单页进纸器、出纸器关闭)435(W) x 512(D) x 302(H)mm (单页进纸器、出纸器打开)重量 3.8kg (不包括墨盒/电源线)墨水容量T1191 (大容量黑色，2支) 大约740页 *4T1091 (黑色，2支) 大约485页 *4T1092 (青色) 大约615页 *4T1093 (洋红) 大约410页 *4T1094 (黄色) 大约650页 *4彩色墨盒平均打印量 大约535页 *4耗材超省 相对前代产品，办公打印成本直降45％*速度飙升高清晰文本模式下，黑色文本打印27页/分钟，经济模式更高达38页/分钟品质震撼采用DURABrite Ultra颜料墨水, 全色防水, 更可实现印刷级打印品质喷墨打印机喷墨打印机*测试条件根据ISO/IEC 24711 & 24712 标准样张得出CMYK综合成本与前一代产品比较结果。

FREEGO EIS系统命令行手册版权所有(C) 2003-2020一、安装时期修改EIX/EIG的IP地址和路由信息错误!未定义书签。

二、经常使用配置命令................... 错误!未定义书签。

EIG大体查询命令............................................... 错误!未定义书签。

EIA大体查询命令............................................... 错误!未定义书签。

EIX/EIG自动备份数据库的功能说明............................... 错误!未定义书签。

查看各地的接通率情形........................................... 错误!未定义书签。

IP呼前途由拥塞爱惜启用方式.................................... 错误!未定义书签。

通话通过注册平台（EIX）强制转发的配置.......................... 错误!未定义书签。

三、对接调试PRA的经常使用命令......... 错误!未定义书签。

支持不持续主叫号码池的配置..................................... 错误!未定义书签。

修改平台主叫号码属性的说明..................................... 错误!未定义书签。

查看EIG的E1状态.............................................. 错误!未定义书签。

◆修改E1桢格式 .................................................................................................... 错误!未定义书签。

C4017 / Revised 9-19-19International Standards Organization Registered Firm;ISO 9001 Quality SystemExSite ® Enhanced Explosionproof Camera SystemHIGH RELIABILITY, FULL HD FIXED IP SYSTEMS Product Features•Up to 1920 x 1080p Resolution Wide Dynamic Range (WDR), 30x zoom lens, and Superb Low light Performance •Dual Stream H.264 IP Video with Smart Compression •Rated to Operate from -60 to +60° C while in Compliance to T6 Surface Temperature (<85° C ) Hazardous Location Regulations •316L Billet Stainless Steel Electro Polished Construction •Standard IP Ethernet Connection and Integrated Transmission Options including Fiber, Ethernet over Coax, and UTP Extension •Full Suite of Built-In Analytics including Adaptive Motion Detection, Abandoned Object, and More •Electronic Image Stabilization •ONVIF Profiles S, G, and Q Conformant•Efficient Installation with a Safety Attach Point, and Simple Wire Termination Methods.•Dual Entry Ports to Separate Data and Power Cables•Certifications: FCC Part 15, CE, UL/cUL, ICES-003, RCM, S-Mark, KC •Hazardous Location Certifications: IECEx, ATEX, INMETRO, EAC Ex, CCOE, UL/cUL •Marine Certification: DNVExSite Enhanced Series camera systems are designed to meet demanding explosionproof requirements, providing high reliability,ease of installation, and best-in-class imaging and technology. The ExSite Enhanced Series is designed for rugged environmental applications including oil and LNG facilities, refineries, on and offshore drilling rigs, and on-board marine applications. Featuring rugged 316L stainless steel construction that has been subjected to extensive vibration and environmental testing make it ideal for use in the most extreme conditions of temperature, moisture, ice, and dust.The system can operate from –60° to 60°C (–76° to 140°F) while maintaining compliance to the T6 (<85°C) surface temperature specifications.ExSite Enhanced Series cameras are easy to install and adaptable to most operational needs. The camera has dual-entry ports, allowing for separate transmission and power cables, and it is adaptable to most transmission methods via SFP/FSFP modules. ExSite Enhanced cameras support a range of input power options with a new 48 VDC option that enables installation in DC-only facilities. ExSite Enhanced cameras also come standard with wipers and sun shrouds,capturing desired video regardless of the weather.The ExSite Enhanced Series provides industry-leading image quality using a Full HD 1080p camera with 30x zoom producing up to 60images per second. The ExSite Enhanced system has Surevision 3.0technology, providing excellent picture quality in the challenging lighting conditions common to hazardous areas with 130db wide dynamic range (WDR), and low-light imaging performance down to .03 lux. The camera’s image defog capability increases video quality in poor visibility conditions. And with anti-bloom, 3D noise filtering,and enhanced tone mapping, ExSite Enhanced with Surevision 3.0technology offers the finest video quality in the explosionproof market.EXSITE ENHANCED FIXED SERIESAdditional Features•Integrated Wiper•Sun Shroud, and Heater/Window Defroster•Configurable On-Screen Displays•4 Alarm Inputs•2 Relay Outputs (1 is dedicated for the washer)•Autofocus with Manual Override•Auto Iris with Manual Override•Dual cable entries for multiple data and power configurations •Easily accessible internal microSD storage for local recording (ONVIF Profile G)•1000Base-T / 100Base-T ethernet and SFP/FSFP connection•SFP/FSFP modules to support fiber, ethernet-over-coax (EoC), or UTP •Compatible with Third Party Explosionproof Wash Systems•Manual 360° Pan and 180° Tilt Adjustments with optional accessory mount•Remote hard-reset capability allows for maintenance without physical access to the cameraPELCO ANALYTICS BEHAVIORSExSite Enhanced includes nine user-configurable behaviors, with up to three analytics behavior active at any one time.•Abandoned Object: Detects objects placed within a defined zone and triggers an alarm if the object remains in the zone longer than the user-defined time allows.•Adaptive Motion Detection: Detects and tracks objects that enter a scene and then triggers an alarm when the objects enter a user-defined zone.•Camera Sabotage: Detects contrast changes in the field of view. This behavior triggers an alarm if the lens is obstructed by spray paint, a cloth, or lens cap or if there is any unauthorized repositioning of the camera.•Directional Motion: Generates an alarm when a person or object moves in a specified direction over a user defined “trip wire” location.This behavior is often used where personnel or vehicles are supposed to enter or exit a scene going a specific direction; subjects coming from the disallowed direction will trigger the analytic alarm.•Loitering Detection: Identifies when people or vehicles remain in a defined zone longer than the user-defined time allows. This behavior is effective in real-time notification of suspicious behavior in sensitiveareas.•Object Counting: Counts the number of objects that enter or pass through a user defined zone.•Object Removal: Triggers an alarm if an object is removed from a user-defined zone.•Stopped Vehicle: Detects vehicles stopped near a sensitive area longer than the user-defined time allows. SOFTWARE FEATURES•Multilingual menus•Password protection•32 window blanks, configurable in size•Pelco analytics including eight user-configurable behaviors •Smart Compression, reducing bandwidth consumption while still providing high quality imagingCAMERA/OPTICSSensor Type1/2.8-inch Type Exmor CMOS Sensor Optical Zoom30XDigital Zoom12XMaximum Resolution1920 x 1080Aspect Ratio16:9Lens f/1.6 ~ f/4.7, focal length 4.3 mm (wide) ~129.0mm (tele)Horizontal Angle of View63.7° wide - 2.3° teleLight Sensitivity*Color (33 ms)0.03 luxColor (250 ms)0.008 luxMono (33 ms)0.004 luxMono (250 ms)0.001 luxDay/Night Capabilities YesShutter Range1/1 ~ 1/10,000 secSignal-to-Noise Ratio>50dBIR Cut Filter YesWide Dynamic Range130 dbIris Control Auto iris with manual override Backlight Compensation YesAutomatic Gain Control YesActive Noise Filtering Yes; 3D Noise FilteringElectronic ImageStabilization (EIS)Yes*Sensitivity in lux for 90% reflectance, f/1.6 (wide angle), 50 dB gainat 30 IRE (30% of signal level) with Sensitivity Boost OFF; 4X improvement to sensitivity with Sensitivity Boost ONVIDEOVideo Encoding H.264 High, Main, or Base profiles andMJPEGVideo Streams Up to 2 simultaneous streams; the secondstream is variable based on the configurationof the primary streamFrame Rate Up to 60, 30, 25, 15, 12.5, 10, 8.333, 7.5, 6, 5,3, 2.5, 2, 1 (depending on the coding,resolution, and stream configuration) Available ResolutionsNETWORKEthernet Interface Ethernet (1000Base-TX or100Base-TX)Auto MDI/MDI-XAuto-negotiate/manual settingEthernet Cabling Type Cat5e or betterFSP/FSFP Interface Supports Pelco FSFP Series Transceivers(input models) and third-party MSACompliant TranceiversSupported Protocols TCP/IP, UDP/IP (Unicast, Multicast IGMP),UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6,SNMP v2c/v3, QoS, HTTP, HTTPS, SSH, SSL,SMTP, FTP, and 802.1x(EAP)UsersUnicast Up to 20 simultaneous users depending onresolution settings (2 guaranteed streams) Multicast Unlimited users H.264Security Access Password protectedSoftware Interface Web browser view and setupPelco System Integration Endura 2.0, Digital Sentry 7.3 andPelco VideoXpert 1.9 (or later)Open API Pelco API or ONVIF Profile S, G, and Q Mobile Application Integrated to Pelco Mobile AppVideo Motion Detection Simple motion detection and camerasabotageLocal Storage SDXC, addressable to 2TBCapture 1–5–10 second video clips on camerasabotage, motion detection, or alarm input;record video continuously in the case ofnetwork outage with option to overwrite;access video through FTP protocol and ONVIFProfile G OPERATING TEMPERATURE*Operating Humidity10% to 100% RH (condensing)Storage Humidity10% to 100% RH (non-condensing)*Cold starts within 240 minutes at specified temperatureGENERALConstruction316L billet electropolished stainless steelwith robotic guided laser welding and 100%hydrostatic pressure testingWindow High transmissivity glassSun Shroud316L stainless steel with laser etched logo(passivated for environmental protection) Weight EXF1230-4N: 38.0 lb (17.2 kg)EXF1230-7N: 38.0 lb (17.2 kg)Effective Projected Area 191 in2(EPA)Reset Capabilities Internal reset button for servicability; remotehard-wire reset; remote software restartELECTRICALAlarmUnsupervised Detects open or closed alarm stateSupervised Detects open and short alarm state withexternal 1-kohm resistor to detect alarmtamperingInput 3.5 VDC maximum, 3.5 mA maximum Relay Output30 VDC, 500 mA maximumInput Power Options48 VDC, 2A or 100-240 VAC, 2A, @ 50/60 Hz Input Voltage Range±10%MECHANICALCable Entry Dual 1.91 cm (0.75-inch NPT) threadedopeningsResolution H.264 High Profile (IP GOP structure)MPx Width Height AspectRatioMaximumIPSRecommendedBit Rate (Mbps)2.0719********:9608.00 2.0719********:930 6.05 0.92128072016:9303.00 0.3680044816:930 2.000.2364035216:930 1.801.2312809604:330 3.80 0.498006084:3302.00 0.316404804:330 1.45 0.083202404:3300.50TemperaturePower48 VDC100-240 V Sustaining Maximum60°C (140°F)60°C (140°F)Minimum–60°C (–76°F)–60°C (–76°F)Ice Free Windows–35°C (–31°F)–35°C (–31°F)Cold Start*–30°C (–22°F)–30°C (–22°F) Storage–60°C to 60°C(–76°F to 140°F)–60°C to 60°C(–76°F to 140°F)Power Consumption (VA / W)*Model DescriptionMin(VA / W)With Heating (VA / W)Max(VA / W)@5° C@-55° CEXF1230-4N Fixed–48 VDC17 / 1740 / 4062 / 6274 / 74 EXF1230-7N Fixed–100-240V29 / 1850 / 4274 / 6685 / 77RECOMMENDED MOUNTSAXM200Adjustable mount for ExSite Enhanced FixedModels; enables manual pan/tilt adjustment WXM200 Wall mount designed to mount theExSite Series system directly to aload-bearing vertical surfaceNote: Requires the use of AXM200 for allExSite Enhanced Fixed models.PXM200 Pedestal mount designed to mount an ExSiteEnhanced Series system directly to ahorizontal surface in either an upright orinverted positionNote: Requires the use of AXM200 for allExSite Enhanced Fixed models. CMXM200 Corner adapter for use with the WXM200 tomount an ExSite Series system to the cornerof a structurePAXM200 Pole adapter for use with the WXM200 tomount a system to a vertical pole or with aPXM200 to mount a system to a horizontalpole; recommended pole diameter is 10.16 to22.86 cm (4to9inches)GENERALConstructionMounts Electropolished 316L stainless steel PAXM200 Mounting Straps316L stainless steelMaximum LoadWXM200 40.8 kg (90 lb)CMXM200 40.8 kg (90 lb)PAXM200 40.8 kg (90 lb)PXM200 40.8 kg (90 lb)AXM20019.5 kg (43 lb)Unit WeightWXM200 5.7 kg (12.6 lb)CMXM200 3.71 kg (8.2 lb)PAXM200 4.17 kg (9.2 lb)PXM200 0.86 kg (1.9 lb)AXM200 4.84 kg (10.7 lb)Shipping Weight (approximate)WXM200 7.71 kg (17.0 lb)CMXM200 5.89 kg (13.0 lb)PAXM200 6.35 kg (14.0 lb)PXM200 1.81 kg (4.0 lb)AXM200 6.5 kg (14.3 lb)Mounting Method RecommendedMounting Surface Recommended HardwareWXM200, CMXM200, and PXM200Solid concrete with recommendedstrength of 3,600psi or 25 MpaFive 3/8-16 x 1-9/16-inch long stainless steel drop-in anchors and five 3/8-16 x 1.0-inch threadlength, stainless steel hex head bolts with stainless steel lock washers (not supplied)Five M10x1.5x20mm, stainless steel socket head bolts with lock washers are supplied with theCMXM200 and PAXM200 for use with the WXM200 wall mount or PXM200 pedestal mount.Steel I beam with a minimum of 1/8-inch wallFive 3/8-16 x 1.0-inch thread length, stainless steel hex head bolts with stainless steel lock washersand 3/8-16 stainless steel nuts (not supplied)PAXM200Steel pole with a diameter of 4to9inches (10.16to22.86cm)Four 5/8-inch wide x 40-inch (101.6 cm) long stainless steel straps to attach the adapter to a pole (supplied)AXM200 Solid concrete with recommendedstrength of 3,600psi or 25 MpaIndustry standard 101.6 mm Bolt circle for use with M8 countersunk screws (not supplied).Steel I beam with a minimum of 1/ 8-inch wall Four M10x1.5 x 16 mm thread strength, stainless steel socket cap head bolts and lock washers are supplied for use with WXM200 or PXM200.WXM200 WALL MOUNTCMXM200 CORNER ADAPTERPAXM200 POLE ADAPTERPXM200 PEDESTAL MOUNTNote: Designed for use with a WXM200 wall mount.Note: Designed for use with a WXM200 to mount a system to a vertical pole or a PXM200 to mount the system to a horizontal pole. Recommended pole diameter is 10.16 to 22.86 cm (4 to 9 inches).Pelco625 W. Alluvial, Fresno, California 93711 United States USA & Canada Tel (800) 289-9100 Fax (800) 289-9150International Tel +1 (559) 292-1981 Fax +1 (559) MODELSOPTIONAL ACCESSORIESECPS-48VDC-5APower supply for use with EXF1230-4NCERTIFICATIONS/RATINGS•FCC Part 15•CE•UL/cUL Listed •ICES-003•RCM •KC•IP66, IP67, and IP68, and Type 4X, Type 6, and Type 6P •S Mark for Argentina*•Vibration: IEC 60068-2-6 Test FcHAZARDOUS CERTIFICATIONS•Tamb -60° C to +60° C•UL/cUL Hazardous Locations Listed per NEC Division for dust and Zone for gas and dust–CLASS I, DIVISION 2, GROUPS A, B, C, D, T6–CLASS II, GROUPS E, F, G, T6–CLASS I, ZONE 1, AEx db op pr IIC T6–AEx tb op pr IIIC T85°C •IECEx UL 17.0011X–Ex db op pr IIC T6 Gb X –Ex tb op pr IIIC T85°C Db X •DEMKO 17 ATEX 1834X – 0539 II 2 G Ex db op pr IIC T6 Gb – II 2 D Ex tb op pr IIIC T85°C Db •INMETRO*BR-Ex d IIC T6•EAC Ex*•CCOE**At the time of this publication, certifications are pending. Consult the factory or for the current status of certifications.MARINE CERTIFICATION•DNVNote: Please contact Pelco for information on the dimensions of the flameproof joints.Model Number PTZ/FixedCamera / LensPower EXF1230-4N Fixed1080p 30x48 VDC, 2A EXF1230-7N100-240 VAC,2A, 50/60 HzVALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.Pelco, the Pelco logo, and other trademarks associated with Pelco products referred to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the ONVIF logo are trademarks ofONVIF Inc. All other product names and services are the property of their respective companies.Product specifications and availability are subject to change without notice.©Copyright 2019, Pelco, Inc. All rights reserved.AXM200 ADJUSTABLE MOUNT。

EIS 系统功能配置说明(仅供内部使用)文 档 作 者： ______________ 日期：____/____/____ 开发/测试经理： ______________ 日期：____/____/____ 产 品 经 理： ______________ 日期：____/____/____ 文 档 管 理 办： ______________日期：____/____/____深圳市众方信息科技有限公司版权所有 不得复制深圳市众方信息科技有限公司产品名称 产品版本密级EIS内部公开 文档编号：共 38 页修订记录目录1引言 (5)2升级 (5)2.1平台升级说明 (5)2.1.1升级 (5)2.1.2备份数据库 (6)2.2终端升级说明 (6)2.2.1通过平台升级终端 (6)2.2.2在终端上直接升级 (7)2.2.3通过provision加载 (7)3功能配置和查看 (7)3.1平台功能配置 (7)3.1.1更改IP地址 (7)3.1.2Freelink配置 (9)3.1.3修改MGCPSIP注册端口 (9)3.1.4pra配置 (9)3.1.5SIP中继配置 (10)3.1.6呼出呼入路由配置 (11)3.1.7计费服务器配置 (12)3.1.8全局O口配置方法 (12)3.1.9号码替换配置 (12)3.1.10RS路由配置（业务不对外） (12)3.1.11H323配置 (15)3.1.12标准中继对接 (16)3.1.13虚拟业务配置 (16)3.1.14虚拟小交业务配置 (26)3.1.15P2P配置（功能不对外） (26)3.1.16计费管理(半实时计费) (27)3.1.17ADA常用命令 (28)3.1.18信息查看 (31)3.1.19数据库操作命令 (32)3.2终端配置 (33)3.2.1注册配置 (33)3.2.2路由配置 (36)4问题定位跟踪 (36)4.1.1cc跟踪 (36)4.1.2sip跟踪 (37)4.1.3计费跟踪 (37)4.1.4mgcp跟踪 (37)4.1.5H323跟踪 (38)4.1.6pra跟踪 (38)4.1.7新信令跟踪(trace) (38)4.1.8版本单通定位手段（适用于EIGA和EIGB） (38)5其它 (38)EIS系统功能配置说明1引言此文档主要是针对现在EIS系列产品的功能使用的说明书，阐述了如何对平台和终端进行升级、配置和问题定位。

What is it?Alphacool Eisstation 80 DC-LTHighlightsThe Eisstation 80 DC-LT is part of the Alphacool Enterprise Solutions series. The combination of pump top and reservoir has been designed to fit into compact servers and workstations. Depending on the in-stallation method, the Eisstation 80 DC-LT even fits into 2U server housings.- part of the Enterprise Solutions Series - extreme small form factor - reservoir integrated - pump is fully enclosedArticle textThe Eisstation 80 DC-LT is part of the Alphacool Enterprise Solutions series. The combination of pump top and reservoir has been designed to fit into compact servers and workstations. Depending on the in-stallation method, the Eisstation 80 DC-LT even fits into 2U server housings.What is the special feature?Thanks to the compact dimensions and the variable mounting options, the Eisstation 80 DC-LT is suitable for very compact water-cooled systems. The optionally available DC-LT pump is also available in different performance levels and can easily operate smaller water loops. The entire DC-LT Eisstation is made of acetal and is extremely resistant and durable.What are the mounting options?The 80 DC-LT Eisstation is supplied with an adhesive Velcro mat and special feet. The Velcro mat allows the lowest installation position and is also the easiest to use. A part of the Velcro mat is simply stuck to the desired installation location and the other side to the floor of the Eisstation 80 DC-LT. This means the positioning is completely down to you. The enclosed feet were designed for different mounting possi-bilities. The installation height can be varied. In addition, installation at an angle of 30 or 90° is also possi-ble. In addition, decoupling feet are included with the accessories to reduce the noise of the already quiet pump further.Installation of the pump and filling!The fill port has a diameter of 25 mm and has been designed to be particularly large so that filling can be done easily by hand. This means that the water loop can also be filled without a filling aid such as a spray bottle or funnel. To mount the pump a base plate must be removed, this is only held in place by two screws. Then the O-ring supplied with the DC-LT pump is inserted and the pump is put on and fastened with the two screws. The cable of the pump then just needs to be led through the cable opening.IN and Out?The Eisstation 80 DC-LT consists of a pump top and a reservoir. If both components are used, the IN is located on the side of the reservoir. The OUT is also located on the side of the pump top. You can vary the locations a little by dismantling both parts from each other and simply reassembling the reservoir by turning it 90 or 180°. If the reservoir is not used, the pump top has an additional IN on the opposite side of the OUT.Small, compact and versatile, this is the Eissstation 80 DC-LT from the Alphacool Enterprise Solution se-ries.。

EIS Evaluation ManualAccessing the Annual Staff Performance Evaluation System The following is the process to quickly access your Annual Staff Evaluation. Go to the UNTHSC Intranet and click on Learning Solutions.Step 1 -- * You can access the Annual Staff Evaluation system directly from the Intranet page. You can also use the following link:https:///psp/lspd01/?cmd=loginStep 2 -- ** You will log into EIS using your EUID and password.Step 3 -- *** Select “UNTS HSC Staff Evaluations” from the menu.Step 4 (Part A) -- **** You will select the “Employee - Evaluation Center” which has been developed to make the evaluation system more streamlined.Step 4 (Part B) -- **** Once you are in the evaluation center you will see the screen below.A) ** Highlighted in Red below ---- If you are a Supervisor (Evaluator)you will have 2 tabs (1st tab where you complete your employees’evaluations) and (2nd tab where you complete your Self-Evaluationand sign the Final Evaluation).B) ** Highlighted in Blue below ---- If you are a Non-Supervisor you willonly have 1 tab where you will complete your Self-Evaluation andyou where you will access the Final Evaluation where you sign yourevaluation completed by your Supervisor.B) ** Highlighted in Blue below ---- If you are a Non-Supervisor you will only have1 tab where you will complete your Self-Evaluation and you where you will access the Final Evaluation where you sign your evaluation completed by yourSupervisor.Symbols and Icons in EIS Annual Staff Performance Evaluation Employee Position InformationEvery page will show the Employee Information at the top. It is a good idea for employees and supervisors to verify that all the information is correctly reflected in EIS. If any changes need to occur please let HRS Records know (ext. 2690).There are three ways to move throughout the Evaluation Form:1) The tabs located at the top of the page. Notice a small arrow on the leftand right side of the tabs – this lets you know that there are additionalpages to select from.2) At the bottom of the page you can select “Next Page” which will move yousequentially through the pages of the Evaluation Form.3) Also at the bottom of the page you will find the Evaluation Form tabshighlighted in blue. All of the pages are listed and you can move between any one of the pages.Application HelpIn this link you will be able to access any training manuals to assist you in completing the evaluation form. This manual is an example of what you will find. Employee Self-EvaluationWhen you select this link you will redirected to your employee’s self-evaluation. If they have completed it the form will be filled out in its entirety. If they have not completed their self-evaluation you will see an uncompleted self-evaluation form. When you review the employee self-evaluation – it will appear all on one screen… you just have to scroll down.Evaluation Form “Need to knows”Adding Goals to an Existing PageThe following sections allow you to insert additional goals:1) Section II – Part A – Yearly Performance Goals – minimum 3 goalsrequired with no maximum limit2) Section IV – Areas of Development3) Section V – New Goals and Projects for the Upcoming Year –minimum 3 goals required with no maximum limit. Can copy and pastefrom Section II – Part A as a starting point for new goals for upcomingyearEach time you add a new goal or area of development you just click on the “+” box listed below. You will also see that you can view each goal (View 1) or the entire list (View All) as shown in the two examples below:Adding Comments, Goals, and Areas of Development1) When entering your goals, comments, areas of development there isno limit as to how much information you can add in the box. As youadd information the box will expand to accommodate the informationinserted.2) You are also able to copy and paste information throughout theevaluation form. In addition, information can be copied in from othersources (Word, Excel, etc…)Spell CheckOn the right side of the goal, comment, areas of development box there is an icon you can select to check the spelling in the corresponding box. You have to verify spelling for each comment, goal, area of development.*** EIS does not have capability to conduct an overall evaluation form spellcheck.Once the “click to activate spell check” is selected EIS will take you out of the actual evaluation form to the spell check functionality (See below).Once you have completed the spell check select “Ok” and it will take you back to the evaluation form.Completing the "Self Eval" -- Below is what the screen will look like afterselecting "Self Non-Supervisory Eval." The form should look familiar as the goal was to mirror the form used for the 2007 Annual Performance Review. Now, let's take a closer look at the details on the form below:f Yem - Goa l s and Pr o j ects Y Prof Be havior &Job P erform V Tota l S cor e ' ID[ .!:!e..!.R ICustomize PageIYea r: 2008Se lf N o n-Sup e r v isory E v a l u a ti o nEmt>l oyee iD: 10694722Smith,JaneS up ervi so 1IO : 10642075M olavr h,C assa ndr a AshleyEm a il: prein f e l @V i e w Self -E v a l yat ion H i s torvSection II - Performance EvaluationPart A-- Ye3rly Performance Go dsP o s it o i n tO : 00005725 HR I S An a lyS tEv .:lu at i o n s tat u s : O p enD epm lm e nt: Human R esou r ce S e rvic esE v alya t i on J nstr yct io ns Aoplicat on H e lpA current job description is the foundation for e sublishing the performance e x pectations in thissection. A minimum of three goals need to be listed w ith no m01x imum.P o:utAS c r o ll t o th e bottom t o sa-ve o rcomp l et e th e ev a l ua ti onPe rf o n n n ce Goa lC l ic k toa c tiv a t e s pell chec k.,........ C om ment s are r e qu 1r e d f or e a c h eva lu a t i o n fa c t or .,........krst hu ti o n a l A r ea S upp o r1ed:r Administr<Jt o i n("' A c ade m c i A f f i i"Sr Co mm u nity E ngagem e nt("'" R ese arc hr C li n c i al c m -er AIRa t ing:0.·rc ·d '•"=='"=-·------------------------------------------------,..:.JComple t eSave /Con t i nue la t erINext PageMe r t h e evalua t io n is 'Comp e l te 'you wi ll n o t be ab l e t o upd a t e 11 Onl y your supervisor can re -op en rt.Year Goal s and Projects 1 P r o f Behavior &Jo b Perform 111 Areas o f De v e l o pmen t I Next Year Goats an d Proje c t 1Employee C ommentsSection I – Employee Position Information &Section II -- Performance Evaluation (Part A: Yearly Performance Goals)On the top of every formyou will notice tabs for eachpage of the evaluation. Thisis one way you can move ‘from page to page.Section I – is employee jobinformation. No actions arerequired here. It is alwaysgood to review making sureeverything is accurate andupdated.Yearly Performance Goals –in this section Insert theperformance goals from the yearbeing evaluated. Notice the +/-boxes at the top right – aftereach goal is entered press the +to add the next goal.*** Throughout the form there areblue links that can be selectedto assist you when questionsarise ***Once the goal has been input“Comments” are required foreach goal. In addition, selectthe Institutional Area that thegoal most supported – an ALLoption has been added butmultiple options cannot be sselected.Be sure to put in the “Rating Score”1 – 5 whole numbers only. On thecomments there is no limit and youare able to copy and paste fromother documents. On the right sidethere is a “Spell Check” optionthat can be selected to check forspelling errors.On every form you can either“Save” or “Complete” the evaluation.The second way you can move frompage to page is select “Next Page.”The third option is at the bottom ofThe form where you can select aspecific page from the evaluation.Section II -- Performance Evaluation(Part B: Professional Job Performance Factors)Section II – Part B –Professional Job Performance FactorsThis is the second page of theevaluation form -- the top hasremained the same. There are 8factors that required comments onhow well you performed in eachrespective area.In addition, with each factor there isa rating score which needs to beadded – keep in mind the 1-5 scalewhole numbers ONLY. You canselect the “Blue Link” next to therating box to review the descriptionfor each score.All 8 factors are listed on one page…be sure that you scroll ALL the way tothe bottom of the form where you can“Save” “Complete” or move to the“Next Page”All 8 factors are listed on onepage…be sure that you scroll ALLthe way to the bottom of the formwhere you can “Save” “Complete” ormove to the “Next Page”Section III -- Performance Evaluation ScoreThe third tab in the evaluation is the finalScore. In order to receive the score pressThe “Calculate Score” tab below. Once thisis pressed the screen will update andreflect the score for each area and theoverall “Total Score.”Example of Completed PerformanceEvaluation Score Tab.** In order to complete the evaluationYou must update this tab **Section IV – Areas of DevelopmentSection IV – Areas of DevelopmentTwo sections encompass the areas ofDevelopment: strengths & weaknesses.There are 1 of 2 ways to complete the“Areas of Strength” section:1) In the box you can input allyou can separate out eachto add another strength – just as youallows you an opportunity to explain inmore detail in importance and value ofeach strength you including.There are 1 of 2 ways to complete the“Areas of Weakness” section:1) In the box you can input allyour areas for improvement in a list ornarrative form.2) In the box you can separate out eachweakness and at the top right select the“+” to add another strength – just as youdid when adding your yearly goals… thisallows you an opportunity to explain inmore detail in importance and value ofeach area you want to focus onimproving.** The decision is yours --- there is noone required option **Section V – New Goals and Projects for the Upcoming YearSection V – New Goals andProjects for the UpcomingYearThis section is a reflectionof Section II Part A – theonly difference here is thatyou are inputting goals andprojects for the next reviewperiod.You can copy and pastefrom Section II Part A aswell as add in other projectsand goals.In this section insert theperformance goals from theyear being evaluated.Notice the +/- boxes at thetop right – after each goalis entered press the +to add the next goal.Be sure to select thecorresponding InstitutionalArea Supported.*** Keep in mind that there are no comments required in this section sincethese are the goals and projects for the upcoming year. ***Section VI – Employee CommentsSection VI – Employee CommentsOn the “Self-Evaluation” only theEmployee can complete this section.A Supervisor will only be able toview the comment but not make anychanges.** Please be sure and read thestatement that the commentsinput here by the EmployeeCANNOT be changed once the“Self-Evaluation” has beencompleted. It can only bechanged by approval of theSupervisor. Please be respectfulof the language you use in the“Employee Comments” box.*** This manual visually reflected the Self-Evaluation process…. keep inmind that the process for a Supervisor completing the actual Evaluation isthe same process. ***。

CANOPEN转ETHERNET/IP协议网关HT3S-EIS-COP用户手册V1.35北京核拓普科技发展有限公司目录1. 产品概述 (3)1.1 产品功能 (3)1.2 技术参数 (3)1.2.1 EtherNet/IP技术参数 (3)1.2.2 CANopen技术参数 (4)2. 产品外观 (5)2.1 产品尺寸图 (5)2.2 端子说明 (5)2.3 指示灯 (6)2.4 拨码说明 (7)3. 硬件电气规范 (8)3.1 电气参数 (8)3.2 EtherNet/IP的电气连接 (8)3.3 CANopen的电气连接 (9)4. 协议及数据转换 (10)4.1 协议转换原理 (10)4.2 EtherNet/IP协议介绍 (10)4.3 CANopen协议介绍 (11)5. 网关配置及操作 (17)5.1 配置网关的EtherNet/IP地址 (17)5.2 配置网关的EtherNet/IP从站 (19)5.2.1 使用AB系统的配置方法 (19)5.2.2 使用欧姆龙系统的配置方法 (28)5.3 配置CANopen主站 (38)5.3.1 导入EDS文件 (38)5.3.2 添加CANopen站点 (39)5.3.3 配置PDO (41)5.3.4 配置SDO (44)5.3.5 地址映射表 (46)5.3.6 下载配置 (46)5.3.7 控制字和状态字 (47)5.3.8 启动CANopen通讯 (47)5.3.9 心跳监控功能 (48)1. 产品概述1.1 产品功能HT3S-EIS-COP是一款EtherNet/IP从站功能的通讯网关。

该产品主要功能是将各种CANopen设备接入到EtherNet/IP网络中。

HT3S-EIS-COP网关连接到EtherNet/IP总线中作为从站使用，连接到CANopen总线中作为主站使用。

1.2 技术参数1.2.1 EtherNet/IP技术参数● 网关作为EtherNet/IP网络的从站，可以连接AB（罗克韦尔）、欧姆龙、基恩士等品牌的PLC。

EIS简要操作说明书2. EIS主界面进入主菜单界面，单击图标进入EIS主界面。

在EIS主界面可以设置各种测量参数，比如，扫描模式、频率范围、每一数量级取点数和测量周期，还可以进入各个子界面，比如，Series Measurement, Control Potentiostat或Display Spectrum文件操作2.1.1 打开单击File Operations图标，如果仪器内存中没有数据，会跳过子菜单。

单击Open后，打开文件浏览器，只显示EIS数据文件（文件扩展名 .ism）。

选择路径和文件，单击LOAD按钮载入文件到Thales软件。

单击EIS主界面的Display Spectrum图标显示图形。

接下来的信息框显示被载入数据的测量参数。

单击框内可以关闭它。

提示：打开一个文件将关闭恒电位仪并根据被载入数据的参数设置自动配置恒电位仪。

载入一个文件是用以前使用过的设置执行新的测量的一种简单的方法。

2.1.2 保存通常完成一次EIS测量之后会有数据在仪器内存。

单击Save按钮一个描述框会打开，你可以输入测量参数和记录。

其中几行由软件自动填写（比如，电位，电流和测量时间），其它几行留空由用户填写。

最后三行为序列测量信息保留。

一个序列EIS测量运行时，它们会由软件自动填写。

接受输入信息，点击右上角的按钮放弃输入信息，点击按钮。

找到希望存储的路径（文件夹名称不可以使用中文）。

输入文件名并点击按钮保存数据；点击按钮取消保存。

显示谱图点击这个图标可以显示仪器内存中数据的谱图点击这个图标可以改变图形类型选择图形类型阻抗谱分析点击这个图标进入SIM页，可以做等效电路并拟合。

了解更多信息，请查阅说明书的SIM章节。

信号采集（需相关配件，通常无需了解此项）3. 电极连接方式首先连接测量体系到Zennium的前端。

标准阻抗体系（1 Ω到100 MΩ），用随仪器附带的其中一套电极引线。

提醒：短电极引线测量效果要稍好一些。