XP363使用手册
- 格式:pdf
- 大小:210.33 KB
- 文档页数:4
16路220V交流开关量输入端子板XP563-220V1基本说明XP563-220V交流开关量输入端子板可接收220V AC(50Hz/60Hz)交流开关量信号输入或干触点信号输入(需配扫描电压220V AC)。
端子板对现场信号处理后通过光电隔离器件将信号的状态送给DI信号处理卡件XP363。
同一端子板的全部通道工作方式必须一致。
2性能指标表 2-1 技术指标输入点数 16点,点点隔离额定输入电压(200~240)V AC, 50 Hz±5%或60 Hz±5%工作输入电压(170~264)V AC,50 Hz±5%或60 Hz±5%输入电流 8mA(220V AC,50Hz)输入阻抗 31.8kΩ(50Hz,容性),26.5kΩ(60Hz,容性)ON电压最小160V AC(6mA,50Hz)OFF电压最大40V AC(1.0mA,50Hz)ON响应时间最大35ms(110V AC,25℃)OFF响应时间最大55ms(110V AC,25℃)3使用说明3.1端子板外观图XP563-220V外观结构如下图所示(尺寸:245mm×155mm):图 3-1 XP563-220V结构简图3.2接插件说明表 3-1 接插件说明标号说明J1 外配220V AC接线端子J2 DB25口,通过端子板转接模块XP521和两块XP363相连J3 第一块XP363的信号输入端子J4 第二块XP363的信号输入端子POWER 外配电电源指示灯LED1~LED16 通道状态指示灯:当通道输入信号为ON时,指示灯亮,否则灭3.3接口特性3.3.1干触点信号图 3-2 干触点信号接口特性:以第一通道(CH1)为例图 3-3 电平型信号接口电路:以第一通道(CH1)为例3.4端子定义及接线XP563-220V端子板可以处理干触点和电平型信号。
干触点输入时,需通过端子板进行配电。
表 3-2 干触点信号端子接线说明端子接线图端子序号干触点1第一块卡第一路(CH1)23第一块卡第二路(CH2)45第一块卡第三路(CH3)67第一块卡第四路(CH4)89第一块卡第五路(CH5)1011第一块卡第六路(CH6)1213第一块卡第七路(CH7)1415第一块卡第八路(CH8)1617第二块卡第一路(CH9)1819第二块卡第二路(CH10)2021第二块卡第三路(CH11)2223第二块卡第四路(CH12)2425第二块卡第五路(CH13)2627第二块卡第六路(CH14)2829第二块卡第七路(CH15)3031第二块卡第八路(CH16)3233 L34 N35 PGND表 3-3 电平型信号端子接线说明端子接线图端子序号端子说明电平型1 L第一块卡第一路(CH1)2 N3 L第一块卡第二路(CH2)4 N5 L第一块卡第三路(CH3)6 N7 L第一块卡第四路(CH4)8 N9 L第一块卡第五路(CH5)10 N11 L第一块卡第六路(CH6)12 N13 L第一块卡第七路(CH7)14 N15 L第一块卡第八路(CH8)16 N17 L第二块卡第一路(CH9)18 N19 L第二块卡第二路(CH10)20 N21 L第二块卡第三路(CH11)22 N23 L第二块卡第四路(CH12)24 N25 L第二块卡第五路(CH13)26 N27 L第二块卡第六路(CH14)28 N29 L第二块卡第七路(CH15)30 N31 L第二块卡第八路(CH16)32 N33短接3435 PGND(保护地)当电平信号输入时,一定要注意将33和34号端子短接。
IBM System x3620 M3 (Withdrawn)Product Guide (withdrawn product)The System x3620 M3 is a 2U, dual-socket rack server for single or multiple general business application hosting built on innovative IBM® X-Architecture® leveraging Intel Quick Path Interconnect (QPI) technology. Featuring power-optimized, high-performance Intel Xeon multicore processors and an energy-efficient design with balanced functionality, the x3620 M3 can help reduce cost, improve service, and allow you to manage risk easily and simply.The x3620 M3 is suitable for mid-market and SMB rack clients looking to optimize their IT budgets, and is designed for single or multiple general business application hosting and virtualized, non-blade environments.Suggested Uses: Departmental and file/print servers, online gaming, messaging, video/photo sharing, email, transaction processing, blog hosting, and search engines; for large enterprise, midmarket, SMBs, and emerging markets.Figure 1. The IBM System x3620 M3Did you know?The System x3620 M3 server contains high levels of function and storage capacity for a 2U, 19-inch rack-drawer package. Hot-swap models feature eight 3.5" hot-swap HDD bays plus the ability to add optional media like internal optical drives or internal tape drives. Simple-swap models feature four 3.5-inch simple-swap drive bays. The server has rich reliability and availability features, including Chipkill memory and memory mirroring, redundant power supplies, redundant fans, Predictive Failure Analysis and Light Path Diagnostics, and Integrated Management Module (IMM).Figure 2. The System x3620 M3 - Front viewFigure 3. The System x3620 M3 - Rear viewFigure 4 shows the locations of key components inside the server.Figure 4. The System x3620 M3 - Inside viewStandard specificationsThe following table lists the standard models. Model 46x is preloaded with Microsoft Windows Storage Server 2008 R2 Standard Edition.Table 2. Standard modelsModel Processor*(2 maximum)Memory RAIDadapterDiskbaysDisks Network Optical PowersupplyModels announced January 20127376-46x†1x Xeon E5620 2.40GHz4C 12 MB 1066 MHz1x 8GB M5015+ Battery8x 3.5"HS1x 500 GB72003.5" HSSATA II2x GbE Multi-burner1x 460WModels announced February 20117376-A2x 1x Xeon E5603 1.60GHz4C 4 MB 1066 MHz1x 2GB IntegratedSATA4x 3.5"SSOpen2x GbE Optional1x 460W7376-B2x 1x Xeon E5607 2.26GHz4C 8 MB 1066 MHz1x 4GB M10158x 3.5"HSOpen2x GbE Optional1x 460W7376-44x1x Xeon E5620 2.40GHz4C 12 MB 1066 MHz 1x 4GB M10158x 3.5"HSOpen2x GbE Optional1x 460W7376-D2x 1x Xeon E5645 2.40GHz6C 12 MB 1333 MHz1x 4GB M50148x 3.5"HSOpen2x GbE Optional1x 460W7376-64x1x Xeon X5650 2.66GHz6C 12 MB 1333 MHz 1x 4GB M5015+ Battery8x 3.5"HSOpen2x GbE Optional1x 675W* Processor detail: Standard quantity of processors, processor model, core speed, number of cores, L3 cache, memory speed† Model 46x is preloaded with Microsoft Windows Storage Server 2008 R2 Standard EditionRefer to the Specifications section for information about standard features of the server.Express models are preconfigured with additional components such as processors, memory, and disks with the purpose of making the ordering and installation process simpler. The following table lists the express models that are available in certain regions.Table 3. Express modelsModel Processor*(2 maximum)Memory RAIDcontrollerDisk bays Disks Network Optical PowersupplyNA and LA7376-E2U1x Xeon E5620 2.4GHz4C 12 MB 1066 MHz 3x 2 GB M50148x 3.5" HS Open2x GbE Optional1x 675W7376-E3U1x Xeon X5650 2.66GHz,6C 12 MB 1333 MHz 3x 4 GB M5015+ Battery8x 3.5" HS Open2x GbE Optional2x 675W7376-E4U1x Xeon E5606 2.13GHz4C 8 MB 1066 MHz 1x 4 GB M10158x 3.5" HS Open2x GbE Multiburner1x 460WCEEMEA7376-K6G**1x Xeon E5620 2.4GHz4C 12 MB 1066 MHz1x 4 GB M50148x 3.5" HS Optional2x GbE Multiburner1x 460WRCIS7376-K7G**1x Xeon E5606 2.13GHz4C 8 MB 1066 MHz1x 4 GB M5015+ Battery8x 3.5" HS Optional2x GbE Multiburner1x 675W7376-K8G**1x Xeon E5620 2.4GHz4C 12 MB 1066 MHz1x 4 GB M5015+ Battery8x 3.5" HS Optional2x GbE Multiburner1x 675W* In the processor column: Standard quantity of processors, processor model, core speed, number of cores, L3 cache, memory speed** Withdrawn from marketingStorage host bus adaptersThe following table lists storage host bus adapters (HBAs) supported by the x3620 M3 server. Table 11. Storage adaptersPart number FeaturecodeDescription MaximumsupportedFibre Channel59Y19873885Brocade 4 Gb FC Single-port HBA for IBM System x259Y19933886Brocade 4 Gb FC Dual-port HBA for IBM System x242C20691698Emulex 4 Gbps FC Single-Port PCI-e HBA for IBM System x242C20711699Emulex 4 Gbps FC Dual-Port PCI-e HBA for IBM System x239R65253567QLogic 4 Gb FC Single-Port PCIe HBA for IBM System x239R65273568QLogic 4 Gb FC Dual-Port PCIe HBA for IBM System x246M60493589Brocade 8 Gb FC Single-port HBA for IBM System x246M60503591Brocade 8 Gb FC Dual-port HBA for IBM System x242D04853580Emulex 8 Gb FC Single-port HBA for IBM System x242D04943581Emulex 8 Gb FC Dual-port HBA for IBM System x242D05013578QLogic 8 Gb FC Single-port HBA for IBM System x242D05103579QLogic 8 Gb FC Dual-port HBA for IBM System x281Y1668A2XU Brocade 16Gb FC Single-port HBA for IBM System x281Y1675A2XV Brocade 16Gb FC Dual-port HBA for IBM System x281Y1655A2W5Emulex 16Gb FC Single-port HBA for IBM System x281Y1662A2W6Emulex 16Gb FC Dual-port HBA for IBM System x2SAS46M09123876IBM 6Gb Performance Optimized HBA246M09075982IBM 6Gb SAS HBA2For more information, see the list of IBM Redbooks Product Guides in the Host bus adapters category: /portals/systemx?Open&page=pg&cat=hbaPCIe SSD adaptersPCIe SSD adaptersThe server supports the High IOPS SSD adapters listed in the following table. Table 12. SSD adaptersPart number FeaturecodeDescription Maximumsupported81Y4527A1NB 1.28TB High IOPS MLC DUO Adapter for IBM System x-81Y4535A1NE320GB High IOPS SLC Adapter for IBM System x-68Y73255996640 GB High IOPS MLC DUO Adapter for IBM System x-81Y4531A1NC640GB High IOPS MLC Adapter for IBM System x-81Y45195985640 GB High IOPS MLC DUO Adapter for IBM System x-81Y4539A1ND640GB High IOPS SLC DUO Adapter for IBM System x-For more information about these adapters, see the IBM Redbooks Product Guides in the Internal Storage category:/portals/systemx?Open&page=pg&cat=internalstoragePower suppliesThe server supports up to two redundant power supplies, providing N+N redundancy. Standard models come with one power supply. The following table lists the power supplies for x3620 M3.Table 13. Power suppliesPart number FeaturecodeDescription MaximumsupportedModelswhere used69Y12134777675W Redundant Power Supply2*64x81Y6557A0ZG IBM 675 W High Efficiency Redundant AC Power Supply2*-81Y6754A13H IBM 460 W Redundant AC Power Supply2*A2x, B2x, 44x,46x, D2x* One power supply comes standard with every model.One 2.8 m C13 - C14 power cord is included with every power supply.Integrated virtualizationIntegrated virtualizationThe following table shows that the server supports VMware ESXi installed on a USB memory key. The key is installed in a USB socket inside the server.Table 14. Virtualization optionsPart number FeaturecodeDescription Maximumsupported41Y82781776IBM USB Memory Key for VMware ESXi 41 41Y82873033IBM USB Memory Key for VMware ESXi 4.11 41Y8296A1NP IBM USB Memory Key for VMWare ESXi 4.1 Update 11 41Y8300A2VC IBM USB Memory Key for VMWare ESXi 5.01 41Y8307A383IBM USB Memory Key for VMWare ESXi 5.0 Update 11Remote managementExternal backup units*362516X IBM RDX Removable Hard Disk Storage System - External USB 160 GB Bundle362532X IBM RDX Removable Hard Disk Storage System - External USB 320 GB Bundle362550X IBM RDX Removable Hard Disk Storage System - External USB 500 GB Bundle3628L3X IBM Half High LTO Gen 3 External SAS Tape Drive (with US line cord)3628L4X IBM Half High LTO Gen 4 External SAS Tape Drive (with US line cord)3628L5X IBM Half High LTO Gen 5 External SAS Tape Drive (with US line cord)3628N3X IBM Half High LTO Gen 3 External SAS Tape Drive (without line cord)3628N4X IBM Half High LTO Gen 4 External SAS Tape Drive (without line cord)3628N5X IBM Half High LTO Gen 5 External SAS Tape Drive (without line cord)3580S3V System Storage TS2230 Tape Drive Express Model H3V3580S4V System Storage TS2240 Tape Drive Express Model H4V3580S5E System Storage TS2250 Tape Drive Express Model H5S3580S5X System Storage TS2350 Tape Drive Express Model S533572S4R TS2900 Tape Library with LTO4 HH SAS drive & rack mount kit3572S5R TS2900 Tape Library with LTO5 HH SAS drive & rack mount kit35732UL TS3100 Tape Library Model L2U Driveless35734UL TS3200 Tape Library Model L4U Driveless46X2682†LTO Ultrium 5 Fibre Channel Drive46X2683†LTO Ultrium 5 SAS Drive Sled46X2684†LTO Ultrium 5 Half High Fibre Drive Sled46X2685†LTO Ultrium 5 Half High SAS Drive Sled46X6912†LTO Ultrium 4 Half High Fibre Channel Drive Sled46X7117†LTO Ultrium 4 Half High SAS DriveV2 Sled46X7122†LTO Ultrium 3 Half High SAS DriveV2 Sled* Note: The external tape drives listed can be ordered through System x sales channel. Server may support other IBM tape drives that are not listed in this table. Refer to IBM System Storage Interoperability Center for information.† Note: These part numbers are the tape drives options for 35732UL and 35734UL.For more information, see the list of IBM Redbooks Product Guides in the Backup units category:/portals/systemx?Open&page=pg&cat=tapeInternal tape drives are installed in a Half High Tape Drive Enclosure (up to one tape drive per enclosure) or in a 1U Tape Drive Enclosure (up to two tape drives). One USB Enclosure Adapter Kit is required per tape drive (x3620 M3 only supports USB connections for internal USB or SATA tape drives in external tape enclosures). The USB Enclosure Kit include external 3 m cable and a SATA-to-USB dongle to connect the enclosure to the server's USB port.Top-of-rack Ethernet switchesTop-of-rack Ethernet switchesThe server supports the top-of-rack Ethernet switches from IBM System Networking listed in the following table.Table 23. IBM System Networking - Top-of-rack switchesPart number DescriptionIBM System Networking - 1 Gb top-of-rack switches0446013IBM System Networking RackSwitch G8000R7309CFC IBM System Networking RackSwitch G8000F7309CD8IBM System Networking RackSwitch G8000DC7309G52IBM System Networking RackSwitch G8052R730952F IBM System Networking RackSwitch G8052F427348E IBM Ethernet Switch J48E6630010Juniper Networks EX2200 24 Port6630011Juniper Networks EX2200 24 Port with PoE6630012Juniper Networks EX2200 48 Port6630013Juniper Networks EX2200 48 Port with PoEIBM System Networking - 10 Gb top-of-rack switches7309DRX IBM System Networking RackSwitch G8264CS (Rear to Front)7309DFX IBM System Networking RackSwitch G8264CS (Front to Rear)7309BD5IBM System Networking RackSwitch G8124DC7309BR6IBM System Networking RackSwitch G8124ER7309BF7IBM System Networking RackSwitch G8124EF7309G64IBM System Networking RackSwitch G8264R730964F IBM System Networking RackSwitch G8264F7309CR9IBM System Networking RackSwitch G8264TR7309CF9IBM System Networking RackSwitch G8264TF0719410Juniper Networks EX4500 - Front to Back Airflow0719420Juniper Networks EX4500 - Back to Front AirflowIBM System Networking - 40 Gb top-of-rack switches8036ARX IBM System Networking RackSwitch G8316R8036AFX IBM System Networking RackSwitch G8316FFor more information, see the list of IBM Redbooks Product Guides in the Top-of-rack switches category: /portals/systemx?Open&page=pg&cat=torUninterruptible power supply unitsUninterruptible power supply unitsThe server supports attachments to the uninterruptible power supply (UPS) units listed in the following table.Table 24. Uninterruptible power supply unitsPart number DescriptionRack-mounted UPS21304RX IBM UPS 10000XHV53951AX IBM 1500VA LCD 2U Rack UPS (100V/120V)53951KX IBM 1500VA LCD 2U Rack UPS (230V)53952AX IBM 2200VA LCD 2U Rack UPS (100V/120V)53952KX IBM 2200VA LCD 2U Rack UPS (230V)53953AX IBM 3000VA LCD 3U Rack UPS (100 V/120 V)53953JX IBM 3000VA LCD 3U Rack UPS (200 V/208 V)53956AX IBM 6000VA LCD 4U Rack UPS (200 V/208 V)53956KX IBM 6000VA LCD 4U Rack UPS (230 V)For more information, see the list of IBM Redbooks Product Guides in the Power infrastructure category: /portals/systemx?Open&page=pg&cat=powerPower distribution unitsThe server supports attachments to the power distribution units (PDUs) listed in the following table.Table 25. Power distribution unitsPart number DescriptionSwitched and Monitored PDUs46M4002IBM 1U 9 C19/3 C13 Active Energy Manager DPI® PDU46M4003IBM 1U 9 C19/3 C13 Active Energy Manager 60A 3 Phase PDU46M4004IBM 1U 12 C13 Active Energy Manager DPI PDU46M4005IBM 1U 12 C13 Active Energy Manager 60A 3 Phase PDU46M4167IBM 1U 9 C19/3 C13 Switched and Monitored 30A 3 Phase PDU46M4116IBM 0U 24 C13 Switched and Monitored 30A PDU46M4119IBM 0U 24 C13 Switched and Monitored 32A PDU46M4134IBM 0U 12 C19/12 C13 Switched and Monitored 50A 3 Phase PDU46M4137IBM 0U 12 C19/12 C13 Switched and Monitored 32A 3 Phase PDUEnterprise PDUs71762MX IBM Ultra Density Enterprise PDU C19 PDU+ (WW)71762NX IBM Ultra Density Enterprise PDU C19 PDU (WW)71763MU IBM Ultra Density Enterprise PDU C19 3 phase 60A PDU+ (NA)71763NU IBM Ultra Density Enterprise PDU C19 3 phase 60A PDU (NA)39M2816IBM DPI C13 Enterprise PDU without linecord39Y8923DPI 60A Three Phase C19 Enterprise PDU with IEC309 3P+G (208 V) fixed line cord 39Y8941DPI Single Phase C13 Enterprise PDU without line cord39Y8948DPI Single Phase C19 Enterprise PDU without line cordFront-End PDUs39Y8934DPI 32amp/250V Front-end PDU with IEC 309 2P+Gnd connector39Y8935DPI 63amp/250V Front-end PDU with IEC 309 2P+Gnd connector39Y893830amp/125V Front-end PDU with NEMA L5-30P connector39Y893930amp/250V Front-end PDU with NEMA L6-30P connector39Y894060amp/250V Front-end PDU with IEC 309 60A 2P+N+Gnd connectorUniversal PDUs39Y8951DPI Universal Rack PDU w/ US LV and HV line cords39Y8952DPI Universal Rack PDU w/ CEE7-VII Europe LC39Y8953DPI Universal Rack PDU w/ Denmark LC39Y8954DPI Universal Rack PDU w/ Israel LC39Y8955DPI Universal Rack PDU w/Italy LC39Y8956DPI Universal Rack PDU w/South Africa LC39Y8957DPI Universal Rack PDU w/UK LC39Y8958DPI Universal Rack PDU with AS/NZ LC39Y8959DPI Universal Rack PDU w/China LC39Y8962DPI Universal Rack PDU (Argentina)39Y8960DPI Universal Rack PDU (Brazil)39Y8961DPI Universal Rack PDU (India)0U Basic PDUs46M4122IBM 0U 24 C13 16A 3 Phase PDU46M4125IBM 0U 24 C13 30A 3 Phase PDU46M4128IBM 0U 24 C13 30A PDU46M4131IBM 0U 24 C13 32A PDU46M4140IBM 0U 12 C19/12 C13 60A 3 Phase PDU46M4143IBM 0U 12 C19/12 C13 32A 3 Phase PDUFor more information, see the list of IBM Redbooks Product Guides in the Power infrastructure category: /portals/systemx?Open&page=pg&cat=powerThe server supports the rack cabinets listed in the following table. Tower-to-Rack Conversion Kit (part number 42C8923, 5Ux20" Tower to Rack Conversion Kit for x3200) is required for the server to be installed in the rack.Table 26. Rack cabinetsPart number Description201886X IBM 11U Office Enablement Kit93072PX IBM 25U Static S2 Standard Rack93072RX IBM 25U Standard Rack14102RX IBM 25RU standard rack14104RX IBM Linux Cluster Rack93074RX IBM 42U Standard Rack93074XX IBM 42U Standard Rack Extension93084EX IBM 42U Enterprise Expansion Rack93084PX IBM 42U Enterprise Rack93604EX IBM 42U 1200 mm Deep Dynamic Expansion Rack93604PX IBM 42U 1200 mm Deep Dynamic Rack93614EX IBM 42U 1200 mm Deep Static Expansion Rack93614PX IBM 42U 1200 mm Deep Static Rack93624EX IBM 47U 1200 mm Deep Static Expansion Rack93624PX IBM 47U 1200 mm Deep Static RackFor more information, see the list of IBM Redbooks Product Guides in the Rack cabinets and options category:/portals/systemx?Open&page=pg&cat=rackThe server supports the rack console switches and monitor kits listed in the following table.Table 27. Rack optionsPart number DescriptionMonitor kits and keyboard trays172319X19" 1U Flat Panel Console Kit17231RX IBM 1U 17" Flat Panel Console Kit with Optical Drive Bay172317X17" 1U Flat Panel Console Kit17233RX IBM 1U 15" Flat Panel Console Kit40K5372IBM Rack Mountable Keyboard & Pointing Device - 3m Cable - Black - USB - US English 103P 40K9584IBM Preferred Pro Keyboard- Full Width - 2m Cable - Black - USB - US English 103P40K9200IBM 2 Button Optical Wheel Mouse - Black - USB17235RX IBM Rack Keyboard TrayConsole switches1754D2X IBM Global 4x2x32 Console Manager (GCM32)1754D1X IBM Global 2x2x16 Console Manager (GCM16)1754A2X IBM Local 2x16 Console Manager (LCM16)17352GX IBM Global 2x16 Console Manager1754A1X IBM Local 1x8 Console Manager (LCM8)Console cables43V6147IBM Single Cable USB Conversion Option (UCO)39M2895IBM USB Conversion Option (UCO) - 4 Pack39M2897IBM Long KVM Conversion Option (KCO) - 4 Pack46M5383IBM Virtual Media Conversion Option Gen2 (VCO2)For more information, see the list of IBM Redbooks Product Guides in the Rack cabinets and options category:/portals/systemx?Open&page=pg&cat=rackTrademarksLenovo and the Lenovo logo are trademarks or registered trademarks of Lenovo in the United States, other countries, or both. A current list of Lenovo trademarks is available on the Web athttps:///us/en/legal/copytrade/.The following terms are trademarks of Lenovo in the United States, other countries, or both:Lenovo®BladeCenter®RackSwitchServeRAIDServerGuideServerProven®System x®The following terms are trademarks of other companies:Intel® and Xeon® are trademarks of Intel Corporation or its subsidiaries.Linux® is the trademark of Linus Torvalds in the U.S. and other countries.Microsoft®, Windows Server®, and Windows® are trademarks of Microsoft Corporation in the United States, other countries, or both.Other company, product, or service names may be trademarks or service marks of others.。
Agilent 363xA-Series Programmable dc Power SuppliesData Sheet•Single and triple outputs•80W to 200W output power•Dual output ranges (except E3631A)•Low noise and excellent regulation•High accuracy and resolution•Remote sense (except E3631A)•Front and rear output terminals(E3633/34A only)•GPIB and RS-232 standardClean and stable power with programmability at an affordable priceAffordable programmable power supplies to meet your needsThe E363xA-series of programmable dc power supplies give you the performance of system power supplies without the high price.All models give you clean power, dependable regulation and fast transient response with built-in GPIB and RS-232 interface. E363xA-series are designed to meet the most demanding applications in R&D design verifications, production testing, and QA verifications with traditional quality and reliability you can count on.Excellent Performance you can trust0.01% load and line regulation keep the output steady when power line and load change occur. The power supplies specify both normal mode voltage/current noise and commonmode current noise.The low normalmode noise specification assuresclean power for precision circuitryapplications and the low commonmode current provides isolation frompower line current injection.Remote InterfaceIf you have an IEEE-488 card orRS-232 in a PC, these power supplieswill work for you. Every model comesequipped with both GPIB and RS-232as standard. All programming isdone in easy to use SCPI (StandardCommands for ProgrammableInstruments). The user’s guidedescribes the process for first timeprogrammers.Front Panel OperationA knob and self-guiding keypadsallow you to set the output at theresolution you need for the mostexacting adjustments quickly andeasily. Up to three complete powersupply setups can be stored andrecalled from the internal non-volatilememory. The output on/off buttonsets the output to zero.E3631A triple-output power supplyThis famous 80-watt triple outputsupply offers three independent0to +6 V/5 A and 0 to ±25 V/1 Aoutputs. The6V output is electricallyisolated from the ±25 V supply tominimize any interference betweencircuits under tests. The±25 Voutputs can be set to track each other.E3632A/33A/34A single-output dual rangepower suppliesThese single output power suppliesgive you the flexibility to select fromdual output ranges. Output load isprotected against overvoltage andovercurrent, which are easily mon-itored and adjusted from the frontpanel and remote interface. Remotesense is available to eliminate theerrors due to voltage drops on theload leads. E3633A/34A offers frontand rear output terminals. Agilent Technologies2Ordering Information E3630-Series Power Supplies E3631A 80-Watt Triple Power Supply E3632A 120-Watt Single Power Supply E3633A/34A 200-Watt Single Power Supply Power OptionsOpt. 0E3 230 Vac ±10%Opt. 0E9 100 Vac ±10%Other OptionsOpt. W50 Additional 2-year warranty (5-year total)Opt. 910 Extra manual sets Opt. 1CM Rack-mount kitRack Mount Kits E3631A/32A/33A/34ATo rack mount two instruments side by side Lock-link Kit(P/N 5061-9694)Flange Kit(P/N 5063-9214)To rack mount two instruments in a sliding support shelfSupport Shelf (P/N 5063-9256)Slide Kit (P/N 1494-0015)Agilent TechnologiesAgilent Technologies ’ Test and Measurement Support, Services, and AssistanceAgilent Technologies aims to maximize the value you receive, while minimizing your risk and problems. We strive to ensure that you get the test and measurement capabilities you paid for and obtain the support you need. Our extensive support resources and services can help you choose the right Agilent products for your applications and apply them successfully.Every instrument and system we sell has aglobal warranty. Support is available for at least five years beyond the production life of theproduct. Two concepts underlie Agilent’s overall support policy: “Our Promise” and “Your Advantage.”Our PromiseOur Promise means your Agilent test andmeasurement equipment will meet its advertised performance and functionality. When you are choosing new equipment, we will help you with product information, including realistic performance specifications and practical recommendations from experienced test engineers. When you use Agilent equipment, we can verify that it works properly, help with product operation, and provide basic measurement assistance for the use ofspecified capabilities, at no extra cost upon request. Many self-help tools are available.Your AdvantageYour Advantage means that Agilent offers a wide range of additional expert test and measurement services, which you canpurchase according to your unique technical and business needs. Solve problems efficiently and gain a competitive edge by contracting with us for calibration,extra-cost upgrades, out-of-warranty repairs, and on-site education and training, as well as design, system integration,project management,and other professional engineering services. Experienced Agilent engineers and technicians worldwide can help you maximize your productivity, optimize the return on investment of your Agilent instruments and systems, and obtaindependable measurement accuracy for the life of those products.。
2L夏普363打印机驱动安装设置
1、打印机类型:网络打印机
2、安装图例
-----------------------------------winXP界面------------------------------------- 开始菜单-右侧打印机和传真
点左侧的“添加打印机”或右键选择添加打印机
创建新端口 tcp/ip port
输入2楼网络打印机IP地址:192.168.1.254,点下一步
如果之前已经添加过网络打印机,可以选择”使用以下端口“,里面192.168.1.254那个,点击下一步(下图说明:如果新安装打印机驱动,则跳过)
选择从磁盘安装驱动
选择驱动程序文PCL6根据操作系统选择32bit(WINDOW XP 或者WIN7 32位) 64bit(win7 64位)
打印机型号选SHARP MX-M363N那个
安装成功之后,在打印机和传真界面,会出现相应型号打印机的图标,有一个勾表示为默认打印机,即安装成功。
SUPCON集散控制系统在化工装置中的应用现国内化工装置很多采用浙大中控SUPCON集散控制系统,文章主要针对该控制系统与同类型其他控制系统进行对比,阐述该控制系统在现代工业自动控制中的应用及优缺点。
标签:浙大中控;控制系统;比较;优缺点1 系统硬件和其他控制系统一样,浙大中控控制系统硬件也是由电源系统、主控制卡CPU、I/O卡、数据转发卡等组成。
1.1 主控制卡XP243X主控制卡是整个控制系统的核心,通过过程控制网络与操作站、工程师站相连。
接收工程师站发出的管理信息,并向操作站传递工艺装置的特性数据和采集到的实时数据。
它可以自动完成数据采集、信息处理、控制运算等各项功能。
1.2 系统I/O卡件本控制系统使用的I/O卡件包括:模拟量输入卡XP313、模拟量输出卡XP322、数字量输入卡XP363、数字量输出卡XP362、热电偶输入卡XP314及热电阻输入卡XP316。
其中,该控制系统与其他控制系统相比,每块I/O卡件本身都带有拨码开关,可以单独分组设定卡件设置,使用起来更加灵活、可靠。
1.3 数据转发卡数据转发卡XP233连接着主控制卡与I/O卡件,一方面驱动SBUS总线,另一方面管理本机笼的I/O卡件。
2 软件系统2.1 组态工具该系统采用分类的树状结构管理组态信息,使用户能清晰把握系统的组态状况。
图1为系统组态总体画面,通过组态工具,可以对控制站、操作站及控制小组进行具体设置。
与进口同类型的控制系统相比,组态画面全部采用中文界面,使组态更加直观、易懂。
而且条理清晰,容易上手。
2.2 系统回路组态SUPCON控制系统通过通道组态画面,可以将现场变送器来的电流、电压或阻值信号转变为可在流程图画面上显示的实际测量值画面。
其中,可以对量程、报警值等进行设置。
如果测量气体介质,可以通过温度补偿、压力补偿来进行温压补偿设置。
如果测量流量信号,可以通过开方选项来进行设置,还可以进行累计流量设置。
在进行一般控制回路的组态时,与其他控制系统相比,不需要进行功能块的搭建工作,只需在弹出的组态画面对话框的设置栏设置好相应的参数即可,节省了很大的工作量,而且避免了功能块引脚连接错误的弊端,大大提高了组态工作的及时性、准确性。
STS363X数字式远动服务器装置一、主要技术特点1.1主要功能支持多个调度主站同时以不同规约和RTU之间的信息交换;支持双主机自动切换功能;多主站通信的多数据库管理;支持通过Ethernet(以太网)以TCP/IP协议同其它设备交换信息;支持各种常用RTU规约(SC1801、V AN_COMM、μ4F、DNP3.0、RP571、IEC60870-5-101及各种形式的CDT等),可以根据用户需要灵活选用;软件I/O点组态和设置;灵活方便的调试维护功能;GPS卫星同步时钟;中央I/O信号(闭锁开入、音响报警开出等);STS363X最多提供6个远动通道,3个智能设备接入串口;最多提供2个104通道接口5.7寸真彩TFT+触摸屏人机界面200条遥控历史记录串口报文在线监视1.2工作原理STS363X远动主站通过以太网或其他形式的网络如RS-485等同各种不同类型的保护装置或I/O模块通信,把所采集的数据送到几个独立的数据库中,经规约转换后,分别上送到不同的调度主站。
分别至各调度主站STS363X型远动主站采用以太网作为站内通讯主干网。
1.3快速可靠的现场通讯网络STS363X远动主站与前置装置之间通过以太网进行通信,通信采用TCP/IP协议。
装置层通讯速率为10M bps,厂站层通讯速率为100M bps,几乎无最大接点数限制,通讯媒质为双绞线或光纤。
网络采用变压器耦合方式以隔离和防止现场环境带来的干扰。
在通讯距离较长的情况下,需要考虑使用光纤作传送介质。
1.4灵活丰富的远动规约支持STS363X远动主站支持目前国内普遍应用的远动通信规约,如:IEC60870-5-101、μ4F/N4F、各种形式CDT、DNP3.0、SC1801、RP570、DISA、V AN_COMM等。
规约支持已经全部内置于程序中,用户可以根据需要灵活选用。
1.5方便灵活的调试维护手段当在线运行时,用户可以通过STS363X面板指示灯进行运行状态监视。
双模变码王管理软件使用说明书导读亲爱的用户,欢迎您使用《双模变码王管理软件CV-200用户手册》,本手册对双模变码王管理软件的各项功能操作进行了详细描述,请您在使用前认真阅读,以便您能更科学有效地操作本软件。
本手册分五部分向您介绍双模变码王管理软件的各个功能,即《第一章产品概述与注意事项》,《第二章安装与卸载》,《第三章产品功能一览表》,《第四章快速指南》,《第五章基本操作》。
下面介绍一下本文的主要内容:◆若您要了解本软件的系统简介、运行环境和注意事项等相关知识,请参阅《第一章产品概述与注意事项》。
◆若您需要了解本软件的安装与卸载等相关知识,请参阅《第二章安装与卸载》。
◆若您需要整体了解本软件的主要功能操作及相关设置,请参阅《第三章产品功能一览表》。
◆若您需要快速了解如何使用本软件进行签发凭证、审核凭证、授权凭证及计算支付密码的基本操作及主管设置,请参阅《第四章快速指南》。
◆若您需要详细了解本软件的各项功能及相关设置,请参阅《第五章基本操作》。
祝您使用愉快!1产品概述与注意事项1.1产品介绍“双模变码王管理软件”是电子支付密码系统中的一个组成部分,由于“双模变码王”已从传统的支付密码器演变成为一个可分离式的密码器,被分离出的迷你变码王外观看起来类似一个小巧的优盘,不论是携带、连接、插拔都非常方便。
用户可以直接在计算机上使用,所以我们需要一个计算机上运行的管理软件,实现传统意义上支付密码器的各项控制、管理功能及其与用户的交互界面。
“双模变码王管理软件”就是实现与用户的交互、并将相关操作转化为发向“迷你变码王”的命令包,实现支付密码的相关功能的软件。
“迷你变码王CU-200”如下图所示。
1.1.1产品特点迷你变码王CU-200支持插入手持式设备内使用,或通过电脑USB接口连接使用,在两种模式下既可分别独立使用,又可交叉使用,且人员、权限设置在两种模式通用,一张票据的签发、审核、授权也可分别在不同的机器上完成,适合多种办公场合和各类财务人员的使用。
JX-300XP一、判断题1.一个XP202机柜最多配置7只机笼,其中1只电源机笼、6只I/O机笼。
(×)2.主控制卡和数据转发卡均可进行冗余设置,冗余设置方法为:插上短路块代表冗余,取下短路块代表单卡工作。
(×)3.在组态设置时,主控制卡地址只能从1开始,且只能为奇数。
(×)4.在组态设置时,数据转发卡的地址只能从2开始。
(×)5.在机柜XP202的供电过程中,一只电源能同时给1、2#或3、4#机笼供电。
(√)6.模拟量信号输出卡XP322可输出0~5V和1~5V的标准电压信号。
(×)7.主控制卡XP243存放目标代码(SCconTrol)的容量为348K。
(√)8.XP243主控制卡与XP233数据转发卡之间是通过SCnetII网络相联接的。
(×)9.JX-300XP DCS 除了电源、主控制卡、数据转发卡和网络外,其余I/O卡可任意冗余。
(×)10.JX-300XP DCS 支持带电插拔卡件。
(√)11.JX-300XP DCS在不开控制站机柜门的情况下,可以从监控软件画面上了解到控制站机柜中卡件的详细布置图和各I/O卡件的工作情况及发生故障的情况。
(√)12.JX-300XP系统中,SCNET-II网络可以采用星型或者总线型的网络拓扑方式。
(√)13.JX-300XP中,每个I/O机笼与其他机笼通过1条SBUS电缆连接,因此SBUS网络实际上是不冗余的。
(×)14.SBUS-S2总线上的最大节点数目为6。
(×)15.SBUS-S1是不冗余的。
(√)16.主控卡和数据转发卡之间的网络是SBUS-S1。
(×)17.数据转发卡和机笼内I/O卡件之间的网络是SBUS-S2。
(×)18.连接远程机笼时,如果使用XP433M,则可以不配置光电转换盒。
(√)19.光纤接续盒需要进行光纤熔接。
(√)20.XP243中,用户可组态的程序区和数据区的空间大小为8M字节。