沃尔玛操作手册绝密资料
- 格式:ppt
- 大小:963.00 KB
- 文档页数:13
Operator’s ManualFault Finder and Fault Finder / Remote WaRRanty InstRuctIOns LIMITED WARRANTY - A Fault Finder orFault Finder / Remote Warranty is provided to the original purchaser for a period of one (1) year from the date of purchase, when used in accordance with the operating instructions. Y ou must retain your receiptfor proof of purchase. This warranty covers defects in materials and workmanship to the Fault Finder or Fault Finder / Remote. TERMS THAT APPLY TO THE WARRANTY Improper installation, misuse, neglect and tampering of any kind are NOT covered under the Limited Warranty. Fault Finderor Fault Finder / Remote, returned under the Warranty will be inspected and if the problem is determined to be the result of neglect or abuse, then no warranty will be applied. No warranty other than the above is expressed or implied. Implied warranties of merchantability and fitness for a particular application are hereby disclaimed unless the law specifically precludes this disclaimer. The manufacturer and seller have no liability for damages, incidental or consequential, resulting from or caused by any failure, malfunction or defect of any product.TO MAKE A WARRANTY CLAIM -1. Fault Finder or Fault Finder / Remote, returned for warranty work must be accompanied by a copy of the original sales receipt/invoice and a note showing the customer name, phone number, return address (where the unit will be returned to) and a brief description of the problem.2. Pack product carefully in oversized carton with crushed newspaper (or other appropriate packing materials) for cushioning.3. The product should be shipped PREPAID and insured against shipping loss or damage.4. Send warranties to:Power Wizard10375 ST RT 43 Streetsboro, OH 44241 1-800-866-2161IntROductIOnDepending on the model purchased, there are 3 major functions that the Fault Finder or Fault Finder / Remote can perform.1. VOLTMETER - Displays theelectric fence voltage in kilovolts ( kV ). 1kV = 1000 volts. Benefit: Measuring fence voltage helps determine the effectiveness of the electric fence system.2. CuRRENT METER - Displays the current in (amps) that is flowing through the fence wire. Benefit: Measuring the current through the hot fence wire will help locate faults (shorts) inthe fence system. Fence shorts reduce fence energizer [shock] effectiveness.3. R EMOTE CONTROL - Allows the user to turn the Energizer on-or-off from any location on the fence. (This unique function is only available in the Fault Finder with “Remote” andonly works with remote-ready electric fence Energizers). Benefit: Conveniently save time by turning the energizeron-or-off from any location on the fence (through the hot wire).*Fault FIndeR specIFIcatIOns • Voltage range - .3 to 18 kV• Current range - 2 to 150 amps • Battery - 9 Volt Alkaline*Specifications are subject to changepaRts and theIR FunctIOn IMaGe 1IMPORTANT: The Fault Finder or Fault Finder / Remote does not have a lighted display and was not designed to work in low light conditions. It is not recommend to install or repair electric fencing in low light conditions.pOWeRInG the Fault FIndeR On-OR-OFFON - Press and release the Fault Finder ( ) power button.VoltagecurrentFault direction arrow Fence pulse low Battery power Button and kV / a toggle energizer Off Button (With RemoteVersion Only)energizer On Button (With Remote Version Only)Battery cover and Ground plate Belt clipFence hook Fault direction arrowOFF - When turned on, the Fault Finder will automatically turn off in 1 minute if not in use. To turn the Fault Finder off manually, press and hold the ( ) power button for a few seconds.MeasuRInG Fence VOltaGe1. T urn the Fault Finder on.2. Press the ( ) power button to toggle between the volt and amp function until the kV symbol is displayed on the right hand side of the display(See image 1).3. Firmly hold the Fault Finder with your bare hand (do not wear gloves). Pressing your thumb firmly on top of the Fault Finder, position your fingers to make contact with the metal ground plate (battery cover) on the back. Since the Fault Finder does not require any additional wires for grounding, the Fault Finder relies on your body for the ground. Therefore, making good contact with the metal ground plate is important (See image 2).4. Place the Fault Finder’s fence hook onto the fence wire(See image 3).Each time the energizer pulses, a “lightning bolt” will appear at the top of the display to indicate a fence pulse has been measured. The fence voltage will then be displayed, in kilovolts (kV), at the center of the display. NoTE: If the “lightning bolt” is flashing and voltage readingis “Lo”, then the voltage being measured by the Fault Finder is below the range of measurement.If the “lightning bolt” is flashing and voltage reading is “HI”, then the voltage being measuredby the Fault Finder is above its range of measurement.IMaGe 2MeasuRInG Fence cuRRent1. T urn on the Fault Finder.2. Press the Fault Finder ( ) power button to toggle between the volt and amp function until the “A” symbol is displayed on the right hand side of the display.3. Firmly hold the Fault Finder with your bare hand (do not wear gloves). Pressing your thumb firmly on top of the Fault Finder,position your fingers to make contact with the metal ground plate (battery cover) on the back. Since the Fault Finder does not require any additional wires for grounding, the Fault Finder relies on your body for the ground.Therefore, making good contact with the metal ground plate is important (See image 2).Place the Fault Finder’s fence hook onto the fence wire(See image 3).Each time the energizer pulses, a “lightning bolt” will appear on the top of the display to indicate a fence pulse has been measured. The fence current will be displayed, in amps (A), at the center of the display. Above the current reading an arrow pointing to either theleft or the right will also be displayed. These arrows indicate the direction of the current flow and will help to locate the faults (shorts) in the fence.NOTE: If the “lightning bolt” is flashing and current readingis “Lo”, then the current being measured by the Fault Finder is below the range of measurement. If the “lightning bolt” is flashing and current reading is “HI”, then the current being measuredby the Fault Finder is above its range of measurement.The current reading should not be taken if the fault finder is in close proximity to the energizer as it will give inaccurate readings.tuRnInG the eneRGIzeROn-OR-OFF(Fault FIndeR / ReMOte Only) Please check with the manufacturer as to which Energizer is compatible with the Fault Finder / Remote.1. Turn on the Fault Finder / Remote.2. Firmly hold the Fault Finder with your bare hand (do not wear gloves). Pressing your thumb firmly on top of the Fault Finder, position your fingers to make contact with the metal ground plate (battery cover) on the back. Since the Fault Finder does not require any additional wires for grounding, the Fault Finder relies on your body for the ground. Therefore, making good contact with the metal ground plate is important (See image 2).3. Place the Fault Finder’s fence hook onto the fence wire (See image 3).Fence hook to fence wire contact is needed to transmit the on/off signals.OFF – press and release the ( ) OFF button and the display will show “OFF” indicating that a signal was sent to the Energizer. After the signal is sent, the Fault Finder / Remote will return to measuring current or voltage.ON – press and release the ( ) ON button and the display will show “ON” indicating that a signal was sent to the Energizer. After the signal is sent, the Fault Finder / Remote will return to measuring current or voltage.IMpORtant tIps When usInG the ReMOte FeatuRe:Before removing the Remotefrom the fence, always check the voltage on the fence to ensurethe Energizer received the on-or-off signal. The easiest way to determine if the Energizer is on,is to check the display for the “lightning bolt” indicator.If the Energizer did not turn on-or-off, ensure that the wire being used to send the signal is not open and is connected to the Energizer’s hot wire. If the hot fence wire being used is rusted or corroded and the Remote will not work, move to a different fence location where the fence wire is not rusted or corroded.A low battery will reduce the Remote’s ability to effectively transit the on-off signal to the energizer. Replace the battery if the battery indicator is shown on the display. IMaGe 3selectInG and chanGInG the channel On the Fault FIndeR / ReMOte and eneRGIzeR (Fault FIndeR / ReMOte Only) By default from the factory the Fault Finder / Remote and the Energizer are both set to channel 1.It is not necessary to change to a different channel if you do not have multiple Energizers with remote ca-pability next to or on adjacent fences. To select and change the channel on the Remote and the Energizer:1. Turn on the Fault Finder / Remote.2. Hold the Remote next to the Energizer and press the ( ) OFF button to put the Energizer into standby mode. See the Ener-gizer’s operator manual for details as Energizer models may vary.3. Press and hold down the ( ) power button then press the ( ) OFF button. The current channel set in the Remote will be displayed. Example “ch1”.4. Press and release the ( ) OFF button to toggle through the available channels on the Remote.5. Once the desired channel is displayed on the Remote hold the Remote next to the Energizer and press the ( ) ON button.The Energizer will now confirm that the new channel has been accepted. “See the Energizer’s operator manual for details as Energizer models may vary”. note: If changing the channel on the Remote is needed to match the channel on the energizer, perform steps 3 through 5 without holding the Remote next to the energizer. What tO KnOW BeFORe lOOKInG FOR a Fault On yOuR FenceIt is important to know, when using the Fault Finder for the first time, that a large current reading on the fence does not necessarily mean that there is a critical fault on your fence. The larger the Energizer and the fence that is connected, as well as vegetation on the fence, are all factors that will increase the current reading.It is recommended to first go around the perimeter of the fence and take voltage readings at various locations to determine the effectiveness of your fence system. If, at various fence locations, you have around 3000 volts or moreit is probably not necessary to troubleshoot your fence.If locations on your fence measure less than 3000 volts (depending on the size of the Energizer),then it is recommended that you troubleshoot your fence. Check the Energizer and grounding systemto ensure they are adequate for your electric fence size. If eitherthe Energizer or the groundingsystem is insufficient, for yourfence size, then correct this beforetroubleshooting your fence. (Checkyour fence Energizer manualfor details on the Energizer andchecking the grounding system).Y ou should check your ground sys-tem 2 times a year, even if the fenceseems fine. The ground system isone of the most important aspectsof your electric fence system. Itcompletes the circuit between thehot fence wire, animal contact, andthe Energizer ground terminal. undeRstandInG the Fence cuRRent and VOltaGe ReadInGs To understand how the Fault Finderwill help you find a fault on thefence, it is helpful to understand theconcept of what you are measuring,as it relates to the effectiveness ofyour electric fence system.Let’s use a water hose analogyto understand your electric fence.Think of the Energizer as a waterpump and the electric fence wireas a water hose.The Fault Finder (amp) readingcan be thought of as showingthe amount of water leaks in thehose, with small holes (leaks), atvarious locations along the hose.All fences, even under normalcondition, will have small leaks(fence hot to fence ground leaks).Expect a larger fence to showlarger current readings since it willnaturally have more leaks (faults).Using a larger Energizer will have more flow and this causes the fence to have bigger leaks (faults). More flow will result in a larger current (amp) reading. Vegetation on the fence is alsoa leak and this will also cause a larger current reading. Common leak locations will be grass/weeds in contact with a hot fence wire, tree limbs that are in contact with a hot wire, old cracked insulators, or any other object that comes in contact with both the ground and the hot fence wire.When you are measuring the current at the beginning of the fence you are measuring all the leaks (faults) in the fence. The farther you go from the Energizer the less the current is on the fence. This is because you are measuring less of the fence total leaks (faults) the farther you walk away.The voltage reading on the Fault Finder can be thought of as the amount of water in the hose. This is why the more leaks (faults) there are, the lower voltage reading. This is the reason why fence voltage can be less as you go farther from the Energizer. The less the voltage is on the fence is a result of all the small leaks. (There is less and less water in the hose.)hOW dO yOu use the ReadInG tO FInd a Fault On the Fence?2 types OF Fence cOnFIGuRatIOnsTYPE 1: Fence does not loop back to the Energizer - When using the Fault Finder in a non-looping fence (See example A or B), the current arrow direction is not needed to determine the location of the fault, and can be ignored.TYPE 2: Fence loops back to the Energizer - When using the Fault Finder with a fence that loops back to the Energizer (See example C), the current arrows are used to determine the location of the fault.In normal conditions, as youtest along a fence with no loopsor faults, the fence current will decrease the farther you are from the Energizer (See example A).If you have a fence with oneor more major faults, as youtest along the fence there will beexcess amounts of current on the fence. As you pass the point of the fault, the current will rapidly drop. At this point simply go backwards on the fence and find the exact point, where, on each side, thereis the large change in current. Thisis where your fault is located (See example B).With a fence with loops and faults, as you test along the fencethe current will point in the direction of the current and as you passthe point of the fault the current direction will change. At this point simply go backwards on the fence and find the exact point, where, on each side, there is a change in the direction of the current. This is where your fault is located.ReplacInG the BatteRyWhen the ( ) low batterysymbol appears on the display it is time to replace the 9 volt battery. For longer battery life it is recommend using a 9 volt alkaline type battery.1. Remove the battery cover by unscrewing the 2 screws on the bottom/back metal piece of the Fault Finder. It’s recommended you do this over a table so you do not lose the 2 small battery cover screws.eXaMple a - nOn-lOOpInG Fence WIthOut FeXaMple B - Fence WIth One OR MORe Maj- 14 -eneRGIzeR6.0aMps 3.0aMps eneRGIzeR20.0aMps 18.0aMpsFault(Short toGround)eXaMple a - nOn-lOOp thROuGh BOth WIRes eXaMple c - Fence lOO 2. Remove the old battery and replace it with the new battery. When replacing the new battery check the polarity as shown in the battery compartment to ensure the battery is connected correctly. If you must force the battery then the polarity is most likely reversed.3. Put the battery cover back inplace and carefully screw in the 2 screws. tighten the screws but don’t apply excessive force to prevent stripping the screw. caRInG FOR the Fault FIndeR / ReMOte• Do not leave the Fault Finderin direct sunlight, for instance on the dash of a vehicle. TheFaultsjOR Faults- 15 -2.0aMps 1.0aMps eneRGIzeR10.0aMps3.0aMps 1.0aMps eneRGIzeReneRGIzeRpInG Fence WIth cuRRent shaRed Ops BacK tO eneRGIzeRextreme heat may damage theFault Finder.• Use only a lightly damp cloth to clean the Fault Finder.• Y our Fault Finder is waterresistant not water proof. Donot submerge the Fault Finderin water.• Remove the battery if the Fault Finder is not being used for anextended period of time. Thiswill prevent damage to the FaultFinder from battery leakage.- 16 -5.0aMps5.0aMps1.0aMps1.0aMpsFaultIndicatescurrentdirection。
沃尔玛百货有限公司常用消防安全知识手册一、防火十法:1.要弄熄火柴梗,把烟头掐灭在烟缸内,不在酒后或睡前躺在床上或沙发上吸烟。
2.要及时关闭电源开关及煤气、液化气总阀门。
外出时、临睡前熄灭室内外火种。
3.要教育小孩不要玩火,不要玩弄电器设备。
4.要在规定区域内安全燃放烟花爆竹。
5.要确保走道、楼梯的畅通,不在楼层通道和安全出口处堆物封堵。
6.不乱接乱拉电线,防止超负荷用电。
使用电加热器时,人不能离开。
7.不用明火寻找物品和查漏煤气、液化气。
8.不用灯泡取暖或烘烤衣服。
9.不把点燃的蚊香贴靠在床沿和窗帘处。
10.不在房内焚烧迷信物品。
二、灭火十招:1、发现着火要大声呼喊并迅速拨打火警电话119,讲清路名,弄堂门牌号,然后派人在路口迎候消防车。
2、扑灭火苗要就地取材,如毛毯、棉被罩住火焰,然后将火扑灭。
3、及时用面盆,水桶等传水灭火,利用楼层内灭火器材及时扑灭火灾。
4、个别物品着火,要赶快把着火物搬到室外灭火。
5、油锅起火,直接盖上锅盖灭火。
6、家用电器用火,要先切断电源,然后用毛毯、棉被覆盖窒息灭火,如仍未熄灭,再用水浇。
7、电视机着火用毛毯、棉被灭火时,人要站在侧面,防止显像管爆裂伤人。
8、煤气、液化气灶着火,要先关闭阀门,用围裙、衣物、棉被等浸水后捂盖,往上浇水扑灭。
9、救火时门窗要慢开,以免空气对流加速火焰蔓延和火焰突然窜出伤人。
10、要将着火处附近的可燃物及液化气罐及时疏散到安全的地方。
三、逃生十三要诀:1、逃生预演,临危不乱2、熟悉环境,暗记出口3、通道出口,畅通无阻4、扑灭水火,惠及他人5、明辩方向,迅速撤离6、不入险地,不贪财物7、简易防护,蒙鼻匍匐8、善用通道,莫入电梯9、缓降逃生,滑绳自救10、避难场所,固守待援11、缓晃轻抛,寻求援助12、火已及身,切勿惊跑13、跳楼有术,虽损求生四、干粉灭火器适用范围、使用方法及维护保养1、适用范围:碳酸氢纳干粉灭火器适用于易燃、可燃液体和气体以及带电设备的初起火灾;磷酸铵盐干粉灭火器除可用于上述几类火灾外,还可用于扑救固体物质火灾。
沃尔玛员工手册沃尔玛中国集团沃尔玛员工手册(全职员工)欢迎加入沃尔玛大家庭!在我和我的兄弟姐妹们的成长历程中,我们总是在父亲的商店里帮忙一一扫地、搬箱子,甚至操作冰淇淋机。
我记得我的感觉是:商店的员工就象家庭中的一员,他们总是努力工作并乐于助人。
虽然公司已经从几家店发展到今天的家,但是我每天依然能够感受到以往3000 多“大家庭”的温暖。
对于象我们这样大的商业集团而言,保持归属感,为向我们的国家和社会做出积极贡献而共同工作是能够做到的。
在我们的发展过程中,所面对的最大挑战之一就是“从小处着想”。
我们决不能忽略那些使沃尔玛成功的细微之处一一保持通道清洁、货架上琳琅满目,考虑陈列和推销商品的新方法,以及永远为我们的顾客提供最佳服务。
然而我们所能做的最重要的事情就是尊重同事的才能和个性。
如果能做到这些,如果每个人将自己视为这个蓬勃发展的家庭中一员,我们的成就将是无可限量的。
对于我们的同事来说,这是一个非常激动人心的时期,在沃尔玛您将确确实实有学习和发展的机会和天地。
在南美、亚洲、欧洲、墨西哥和加拿大,我们的顾客服务、卓越的价值观和相互尊重的方式正为无数的新顾客所好评。
在美国,我们的配销中心、会员店和商场将不断争取创纪录的营运成果。
这都归功于您的辛勤工作和奉献。
让我们竭尽全力、不断进步、并为我们是沃尔玛大家庭一一一个真正关心您的家的一员而感到骄傲!感谢您一直保持着出色的表现!罗博•沃尔顿沃尔玛百货公司董事会主席目录欢迎您!公司历史聘用工作条件用工体检试用期工作时间基本资料勤工奖双薪补贴加班所得税计时卡制服休假福利计划差旅及招待费用人事制度成功指导改进指导终止聘用尊重个人公仆领导每个人都是一位公仆领导门户开放政策信息分享《沃尔玛在中国》基层调查服务顾客顾客才是真正的老板保证满意日落原则盛情服务我们都应该做个商人天天平价本地制造VPI/GPI计划“店中店”计划追求卓越诚实公司财产损耗控制预防损耗控制开销防止意外事故保护我们的财产“点子大王”这是我的工作成功晋升和调职表现评估原则总则离职沃尔玛商店/山姆会员商店具体工作条例政策和程序出勤指导禁毒浪漫关系礼物和馈赠骚扰和不正当行为工牌守时工作餐及工间休息时间人事档案吸烟行为道德规范转职工作服工作时间工作场所暴力行为社区服务参与社区环境沃尔玛国际部附件:行为道德规范政策商业道德规范个人道德规范确认书“这项与我们的公司和同事一起致力的工作令我兴奋地看到我们的未来充满希望,我们共同开创的事业前景是乐观的。
沃尔玛管理手册HEN system office room 【HEN16H-HENS2AHENS8Q8-HENH1688】Overview概述This manual will familiarize you with the basic sales floor procedures and Merchandising Standards related to product presentation and merchandising. At times, however, you may need to deviate from these guidelines, with a Coach's approval, in order to get the sales that you need.这本手册将会使你熟悉基本的店面运作程序及有关商品陈列与管理的一些指导知识。
有时候为了促进销售,在经理的批准下你也可以尝试偏离这些指导原则而进行工作。
Merchandising is, for the most part, based on opinion. Do not be afraid to try new things if you feel that it will help increase sales. However, there are many proven concepts that should be applied in all buildings. Also, you must be willing to try someone else's ideas if your techniques are not getting results. Just remember to have fun with it.商品布置这一工作是建立在主观想法的基础上的。
不要怯于尝试新的方法,只要你认为它能促进销售,就去做。
目录第一章沃尔玛公司简介第一节公司简介第二节公司发展史第三节公司宗旨第四节获得奖项第二章沃尔玛公司运营策略第一节沃尔玛三大信仰、十大经营法则第二节运营策略第三节人力资源政策第四节物流与供应链管理第三章供应商操作流程第一节新品进店第二节订货及退货第三节促销进店办理第四节促销活动流程第五节账款操作流程第一章沃尔玛公司简介第一节公司简介沃尔玛百货有限公司由美国零售业的传奇人物山姆·沃尔顿先生于1962年在阿肯色州成立。
经过四十多年的发展,沃尔玛公司已经成为美国最大的私人雇主和世界上最大的连锁零售企业。
目前,沃尔玛在全球15个国家开设了超过8,000家商场,下设53个品牌,员工总数210多万人,每周光临沃尔玛的顾客2亿人次。
1991年,沃尔玛年销售额突破400亿美元,成为全球大型零售企业之一。
据1994年5月美国《财富》杂志公布的全美服务行业分类排行榜,沃尔玛1993年销售额高达673.4亿美元,比上一年增长118亿多,超过了1992年排名第一位的西尔斯(Sears),雄居全美零售业榜首。
1995年沃尔玛销售额持续增长,并创造了零售业的一项世界纪录,实现年销售额936亿美元,在《财富》杂志95美国最大企业排行榜上名列第四。
事实上,沃尔玛的年销售额相当于全美所有百货公司的总和,而且至今仍保持着强劲的发展势头。
至今,沃尔玛己拥有2133家沃尔玛商店,469家山姆会员商店和248家沃尔玛购物广场,分布在美国、中国、墨西哥、加拿大、英国、波多黎各、巴西、阿根廷、南非、哥斯达黎加、危地马拉、洪都拉斯、萨尔瓦多、尼加拉瓜等14个国家。
它在短短几十年中有如此迅猛的发展,不得不说是零售业的一个奇迹。
第二节沃尔玛发展史1950年山姆·沃尔顿开设了第一家特价商店。
1962年沃尔顿以“Wal—Mart”为名在阿肯色州拉杰斯市开办了第一家沃尔玛平价商店。
1974年沃尔玛公司在纽约上市股票,其价值在以后的25年间(到1999年)翻了4900倍。
LIST OF COMPONENTSDISPLAY DEVICEBUTTON FUNCTIONALITYNAVIGATING TIPS:•button.•can press either OK or button to•certain features.USB CABLE PROTECTIVE BAG BEFORE YOU BEGIN CARB/EPA COMPLIANCE NOTE: The stickers included in some products apply to products that have received CARB exemption for emissions compliance. This product may meet the emissions compliance requirements of the California Air Resources Board and Federal Environmental Protection Agency. If so, it is legal for sale and use on pollution-controlled vehicles operated on public streets and highways. The device must be installed and operated according to the instructions provided in this user’s manual. Included with these compliant products is a sticker (similar to the one pictured above) for you to keep in your vehicle. You can either adhere it somewhere on the vehicle (e.g., the inside end of driver’s door) or simply store it in your glove box. The purpose of these stickers is to inform anyone who may have questions regarding the use of your Superchips product and how it affects emissions.1 Double-click the Ignition Icon2 Connect your device to the computer using the supplied USB cable.(Ignition will automatically search for updates related to your device.)6 If required, read and Accept the disclaimer .7 Fill in the required information and click Go to Review .(Here you can check the information you filled in before submitting the order .)8 Click the Place Order button to complete your order .9 If a purchase was made, follow steps 1-3 above to complete the update.1453678PRODUCT UPDATES USING IGNITIONIgnitionand the internet (if possible).11QUICK TUNESTEP 6 - Select a tuning level.Loading your Vehicle Application...Please Wait Stock Files are Saved Successfully!Press OK to continue Select TuningPage 1 of 1Performance Tow 87 Octane Mileage XS SAVE Stock w/ OptionsSTEP 7 - Push left arrow to close out of custom options.STEP 8 - Install the “Tune” File by pressing OK.STEP 8 - Turn the Ignition Off. Press OK to continue.KEY:x= Towing is not recommended for this tune .S= Octane Requirements vary for gas vehicles. Follow recommended guidelines on the device.$= Tow rated up to Superchips recommended tow limits. See limits for your vehicle displayed by the Flashpaq during the programming process.0= Tow rated up to OEM max towing recommendation.Availability of specific tunes may vary based on your vehicle’s make and model:x S Performance - Designed for maximum engine and transmission performance. ---------------------------------------------------------------------------------------------------------------------------------x87 Performance - Designed for non-towing applications and requires the use of 87 octane gas for best results.---------------------------------------------------------------------------------------------------------------------------------x91 Performance - Designed for premium horsepower, torque, and driveability. The tune is calibrated for 2WD, 4WD-HI, and 4WD-LO. Requires 91 octane gasfor best results.---------------------------------------------------------------------------------------------------------------------------------x93 Performance - Designed for maximum horsepower, torque, and driveability. The tune is calibrated for 2WD, 4WD-HI, and 4WD-LO. Requires 93 octane gasfor best results.---------------------------------------------------------------------------------------------------------------------------------x87 Octane - Designed to allow you to run 87 octane regardless of themanufacturer’s recommendation.---------------------------------------------------------------------------------------------------------------------------------S$Light Load Tow - Optimizes engine and transmission performance for mid-weight range towing applications---------------------------------------------------------------------------------------------------------------------------------0Heavy Load Tow - Requires the use of 91 octane gas or better and is used for optimized engine and transmission performance for heavy towing applications.---------------------------------------------------------------------------------------------------------------------------------Towing - Requires the use of 91 octane gas or better and is used for optimized towing up to the OEM recommended towing limits. This tune is safe to use in 4WD-HI or 4WD-LO and is available for all Jeeps covered by Superchips.NOTE: If a towing tune is not available, use 87 Tune with 91 Octane fuel.Crawling Tune - Is a Superchips exclusive tune offering low throttle response and high low-end torque designed for precision low-speed maneuvers. This tune is currently only available for JK Jeep models.----------------------------------------------------------------------------------------------------------------------------------x Extreme - This is an aggressive tune used for maximum horsepower, torque, and driveability.----------------------------------------------------------------------------------------------------------------------------------Mileage XS - Requires 87 octane gas and is used for fuel mileage gains. The tune is calibrated for 2WD, 4WD-HI, and 4WD-LO uses.----------------------------------------------------------------------------------------------------------------------------------Stock - Returns vehicle to factory stock. Removed all Superchips tuning from your vehicle. It is recommended that you calibrate your vehicle back to stock prior to taking it in for service or maintenance.Mileage XS SAVE Stock w/ Options specific requirements.the OBDII port.Rev LimiterSpeed LimiterGear RatioTire SizeFan TempAFM / DODContinueSelect OptionsRev LimiterSpeed LimiterGear RatioTire SizeFan TempAFM / DODContinue Installing EnginePerformance Tuningis now InstalledPress OK to Continue STEP 9 - Allowthe file to beinstalled.STEP 10 - Turnthe ignition Off.STEP 11 - PressOK to return tothe main menu.1415 ADVANCED TUNING OPTIONSi T he vehicle must have appropriate speed rated tires.i Do not exceed proper operating conditions. i O bey all traffic laws. i F or use only on a controlled track. Never exceed legal limits on publicroadways.---------------------------------------------------------------------------------------------------------------------------------Rev Limiter - Adjusts engine rev limiter by increments or fixed values.i D o not exceed proper operating conditions.-------------------------------------------------------------------------------------------------------------Tire Size - This feature has been moved to the “Vehicle Functions” menu, underAdditional Features.Axle (Gear) Ratio - Corrects the speedometer , odometer and automatic transmission shift points for rear end gear changes. i Confirm aftermarket parts are installed before adjusting this option.------------------------------------------------------------------------------------------------------------------------------------Automatic Transmission Shift Points - Adjusts transmission shift points for optimized driveability and operation.---------------------------------------------------------------------------------------------------------------------------------Automatic Transmission Shift Pressure - Adjust transmission shift pressure in PSI to allow for a more aggressive shifts.---------------------------------------------------------------------------------------------------------------------------------Cooling Fan - Adjusts fan turn ON temperature. ---------------------------------------------------------------------------------------------------------------------------------Manual Transmission Skip Shift - Enables or disables Computer Aided Gear Selection (CAGS) for manual transmissions.---------------------------------------------------------------------------------------------------------------------------------Spark Advance Set - Reduces the spark timing.---------------------------------------------------------------------------------------------------------------------------------MDS Disable - Enables or disables the factory Multi- Displacement System. NOTE: On 13-14 Hemi Trucks, the dash light will continue to illuminate even when the feature is actually disabled.---------------------------------------------------------------------------------------------------------------------------------Increasing the height ofyour vehicle raises thecenter of gravity and canaffect stability and control.Use caution on turns andwhen making steeringcorrections.WARNINGAvailability of specific options may vary based on your vehicle’s make and model:---------------------------------------------------------------------------------------------------------------------------------Speed Limiter - Adjusts the top speed limiter by increments or fixed values.alQuestions and Answers Q: Can my Flashpaq program more than one vehicle at a time?A: No, only after you return your first vehicle back to factory stock. -----------------------------------------------------------------------------Q: Does Superchips support custom tuning?A: Not at this time. -----------------------------------------------------------------------------Q: What aftermarket accessories will my Flashpaq work with?A: Flashpaq programmers are engineered to work with the following parts right out of the box: throttle body spacers, shorty headers, cat-back exhaust system, and cold air intake kits. Compatibility may vary by make and model. ----------------------------------------------------------------------------- Q: How do I change my vehicle’s calibration?A: Refer to the TUNING sections of this guide for detailed instructions.NOTICE:Before taking your vehicle into a service center, return your vehicle to stock. The service center might reprogram your vehicle with an updated program without your knowledge. If you do not use this device to return your vehicle to factory stock and your vehicle is reprogrammed by the service center, the programmer will no longer be able to program your vehicle. STEP 1 - Plug the OBDII port.Installing EngineSTEP 6 - Allow the stock settings to be re-installed.Install the Stock File?18RETURNING YOUR VEHICLE TO STOCK COMMON TUNING QUESTIONS STEP 2 - Enter STEP 3 - Turn STEP 4 - Select Select TuningPerformance Tow 87 Octane Mileage XS SAVE Stock w/ Options StockSTEP 5 - Install the Stock File by pressing OK.STEP 7 - Turn the Ignition Off. Press OK to continue.STEP 8 -PressOK to return to the main menu.Select TuningVehicle was Returned toStock SuccessfullyPress OK to continueFor specific Dodge vehicles, the option to modify various features using Quick Options is available. WARNINGNOTICE:Do not remove or bump the OBD-II connector while changing Quick option settings. If you do, the vehicle may not start.Do not make adjustments to your vehicle while parked in unsafe locations including heavy traffic or places without cell phone service.STEP 1 - Enter the Tuning Menu by pressing OK.STEP 3 - the list. STEP 2 - Select Quick Options.specific needs.Select TuningFog Light w/ Highs Cutoff Engine Idle : This feature allows the user to increase the engine Idle RPM momentarily.Gear Ratio : This feature allows you to adjust the gear ratio after they have been modified.Mobile Desoot: For diesel engines with particulate filters, use this feature to activate a regeneration cycle.Spark Adv : This feature gives the option to retard the timing down a min. of 6 degrees.Tire Size : This feature allows you modify the programmed Tire Height. Transfer Case LO Adjustment : Allows you to adjust the transfer case settingswhile in 4-LO.The availability of the following features depends on the year & model of your vehicle.QUICK OPTIONS QUICK OPTIONS EXPLAINEDREAD DTCThis feature allows you to troubleshoot issues that your vehicle may be experiencing. Most vehicles will illuminate the in-dash check engine light. A Diagnostic Trouble Code (DTC) arises when a vehicle’s computer detects a sensor failure or a parameter outside of specific range.CLEAR DTC This feature allows you to clear the DTC and turns off the check engine light.NOTE: If a DTC persists, this could indicate a vehicle malfunction. We recommend seeking a qualified professional in resolving the issue. Program the vehicle back to stock prior to service.STEP 5 - Allow the device to search for DTCs.STEP 6 - Read andfollow the on-screeninstructions.Pressing UP or DOWNwill cycle through theDTCsPressing OK or LEFTwill exitPress OK to ContinueSTEP 7 - Push the/ arrows toview each DTC.DTC - 1of2P0090Fuel Pres Reg Ctrl CircSTEP 8 - Press OKto return to theDTC menu.STEP 5 - Allow thedevice to search forDTCs to clear.STEP 6 - Read andfollow the on-screeninstructions.Vehicle DTCsSuccessfully ClearedPress OK to ContinueSTEP 8 - Press OK to return to the DTCmenu.If you would like to view Parameter IDs (PIDs) specific to your vehicle, following these instructions to learn how to view them using your Flashpaq device.Do not exceed legal speed limits on public roadways.VIEWING GAUGESSTEP 5 - Select a PID Group, then select a total of 4 PIDs. Use the / arrows to switch between screens. OK to select.While viewing gauges, press OK to startDatalogging Press OK again to stopDatalogging Press OK to continueSTEP 6 - Follow the on-screeninstructions. Note the RED highlights.See DataLogging for more information. Select 4 PIDs within thefollowing menu Press OK to continue...PID Groups 1/1Engine MiscFuel Trim/Press Time/Distance Oxygen Sensors Misc Non-Engine Egr/EvapCatalyst Temp Throttle DetailDATA LOGGINGbutton again, to stop the recording.The separator lines will change from Red to which indicates that the device is actively (datalogging).Data logging allows you to record specific vehicle information while driving. Follow these instructions to find out how to datalog, and how it may be helpful to your particular needs.Do not exceed legal speed limits on public roadways.The information will be stored on the device and may be retrieved using a computer . For more information continue to the next section.Engine Misc 1/1Calc Eng LoadEngine Coolant Temp Manifold Abs Pressure Engine RPM Spark AdvanceIntake Air Temperature Mass Air FlowAbs Throttle PositionWARNING WARNINGBATTERY VOLTAGESTEP 1 -Plug the device into the OBDII port.STEP 2 - Enterthe Scan Menu.STEP 3 - Select the Battery Voltage option.STEP 4 - Press OK to return to the previousscreen.DATA LOGGING RETRIEVALfiles.STEP 4 -STEP 5 - Open the folder named DataLogs.STEP 6 -VEHICLE INFOTUNING LEVELStockVIN#################Vehicle Files########DEVICE INFOSTEP 1 - Plug the device into the OBDII port.STEP 2 - Enterthe Info Menu.STEP 3 - Selectthe Device Infooption.STEP 4 - PressOK to returnto the previousscreen.I left Flashpaq tuning in my vehicle and went to my dealer for service, now my Flashpaq will not work?P The dealership likely updated your vehicle’s calibrations, and saved over the tuning. The Flashpaq does not recognize the new iles in your vehicle.----------------------------------------------------------------------------My programmer did not complete programming and went into recovery mode? P Flashpaq programmers are designed with ‘Recovery Mode’which means if, for any reason, the programming process does not finish, the programmer will automatically program your vehicle back to the factory stock settings.It is necessary to follow the screen prompts, possiblyrequiring several ‘Ignition On’ and ‘Ignition Off’ sequences. When recovery is complete your vehicle is at factory stock.My Flashpaq does not power up when plugged into the OB-DII port?P Your vehicle’s OBDII port is powered through a fuse the fuse may be blown. (In most vehicles, this is the same fuse shared by the cigarette lighter)P Try the Flashpaq on another vehicle to make sure it powers up. If it does, then the wiring on the vehicle you are trying to program may be the issue (See your dealer for service).----------------------------------------------------------------------------My Flashpaq Says: “Non-Stock File Detected...” P Your vehicle may have been programmed by anotherdevice. Use that device to set your vehicle back to stock before using the Flashpaq.----------------------------------------------------------------------------When reading the vehicle’s trouble codes (DTCs), I received a P1000 error code? P P1000 is a DTC that sometimes appears after a vehicle isprogrammed or the battery cables are unplugged from the battery. It will automatically clear after several drive cycles.It cannot be removed using the ‘DTC Clear’ function.You are now able to start your vehicle normally. Youmay now attempt to program your vehicle again. In the event that recovery is unsuccessful or fails to complete the programming cycle, a status message will display on the programmer. NOTICE: It is NOT recommended to store your programmer in your vehicle in extreme heat, direct sunlight or extreme cold (temperatures near or below freezing). These conditions can cause malfunction or damage to the programmer.IgnitionSTORAGE AND MAINTENANCESAFETY GUIDELINESThroughout this User Manual you will see important messages regarding your safety or the protection of your vehicle. These messages are designated by the words WARNING, CAUTION, or NOTICE.A WARNING indicates a hazardous situation which, if not avoided, willresult in death or serious injury.A CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.NOTICEA NOTICE indicates a condition that could cause damage to the product or your vehicle.The Superchips Product you have purchased is a high-performanceproduct. As such, it does present some risks of which you should be fully aware. Do not use this product until you have carefully read the following safety information and the Owner Agreement.WARNINGCAUTIONBefore using device, read and understand the user manual, including these additionalsafety instructions. Failure to do so could result in DEATH or SERIOUS INJURY.•Do not exceed legal speed limits on public roadways. Violating traffic laws is dangerous and could result in injury or vehicle damage or both.•Use any enhanced speed capabilities of this product only in closed circuit, legally sanctioned racing environments expressly for this purpose. Violating traffic laws is dangerous and could result in injury or vehicle damage or both.Do not operate the device while driving. Distracted driving could result in traffic accidents,death or serious injury, and/or damage to your vehicle.•Always perform all adjustments or changes while stopped. Changing a setting while driving can interfere with your attention to roadway conditions and could result in injury or vehicle damage or both.•Do not stack products. “Stacking” performance-enhancing devices or other improper installation can cause power train failure on the road. Other products may have features incompatible with your Superchips device. Follow all installation and operating instructions.•Some modifications may affect other parts of your vehicle. For example, if you remove/adjust the speed limiter in your vehicle, be sure your tires and other components are rated for the increased speeds they will have to withstand. Not doing so can lead to loss of vehicle control. Modify the speed limiter only for use in closed circuit, legally sanctioned racing environments, not for use on public roadways.WARNINGSAFETY WARNING & CAUTIONCheck out the performance chips and programmers we offer.。