方式二:辅助接口(AUX)连接到Cisco 路由器上,由于辅助接口 与控制台接口基本上是一样的。在使用辅助接口前你需要配置好相 关的MODEM 命令,这样MODEM 才可以同此路由器相互通信。即远程 拨号连接路由器配置,又称之为out-of-band。
方式三:通过网络的Telnet程序、SSH程序连接到路由器,此称之 为in-band。
Presentation_ID
© 2001, Cisco Systems, Inc. All rights reserved.
11
3.路由器接口
根据功能,一般路由器接口分为三类: 广域网接口:serial接口、BRI接口 局域网接口:以太网接口、AUI接口(附加单元接口) 管理、配置口:Console接口、AUX接口
8
1721
Presentation_ID
© 2001, Cisco Systems, Inc. All rights reserved.
9
Cisco路由器的用户界面
• 路由器是计算机,需要操作系统,Cisco IOS就是路由器的操作系统。 Cisco 互联网络操作系统IOS是路由器和大多数交换机的核心。功能包 括:
Presentation_ID
© 2001, Cisco Systems, Inc. All rights reserved.
12
通过Console和AUX连接
Presentation_ID
© 2001, Cisco Systems, Inc. All rights reserved.
13
路由器接口类型
© 2001, Cisco Systems, Inc. All rights reserved.
6
2621