软件安装管理器-音速启动(VStart) 5.0 专用皮肤,简单皮肤

参考指南Enfocus内容1. PitStop Pro 文档概述 (14)2. PitStop Pro 概述 (16)2.1. 关于 PitStop Pro (16)2.2. 关于动作列表 (16)2.2.1. 打开动作列表对话框 (17)2.2.2. 定义动作列表 (17)2.2.3. 运行动作列表 (17)2.2.4. 导入动作列表 (17)2.2.5. 导出动作列表 (18)2.3. 关于预检规范 (18)2.3.1. 打开预检规范对话框 (18)2.3.2. 定义预检规范 (19)2.3.3. 运行预检规范 (19)2.3.4. 导入预检规范 (19)2.3.5. 导出预检规范 (20)2.4. 关于全局变更 (20)2.4.1. 打开全局变更对话框 (20)2.4.2. 定义全局变更 (21)2.4.3. 运行全局变更 (21)2.4.4. 导入全局变更 (21)2.4.5. 导出全局变更 (21)2.5. 关于 QuickRun (22)2.5.1. 打开 QuickRun 对话框 (22)2.5.2. 定义 QuickRun (22)2.5.3. 运行 QuickRun (22)2.5.4. 运行 QuickRun 收藏夹 (23)2.5.5. 导入 QuickRun (23)2.5.6. 导出 QuickRun (23)2.6. 菜单栏：概述 (24)2.7. 工具窗格：概述 (28)2.7.1. 向工具窗格添加 PitStop Pro 面板 (36)2.8. 对话框：概述 (36)2.9. Enfocus 检查器对话框：概述 (37)2.10. PitStop Pro 快捷方式：概述 (42)2.11. PitStop 编辑工具：修改器键 (44)目录3. 设置 PitStop Pro 首选项 (47)3.1. PitStop Pro 和 StatusCheck 首选项 (47)3.2. 共享首选项 (47)3.3. 访问 PitStop Pro 首选项 (47)3.4. 首选项 > Enfocus PitStop Pro 首选项 > 常规 (47)3.4.1. 处理 (47)3.4.2. 保存文档 (48)3.4.3. 裁切框页边距 (48)3.5. 首选项 > Enfocus PitStop Pro 首选项 > 编辑 (49)3.5.1. 撤销次数 (49)3.5.2. 线框视图中的文本 (49)3.5.3. 显示中心选择控点 (49)3.5.4. 经过对象上方时改变鼠标指针样式 (50)3.5.5. 拖动选区时移动对象 (50)3.5.6. 修改键 (50)3.5.7. 按住 Alt 键的同时拖动选择区域 (50)3.5.8. 粘贴复制的对象 (51)3.5.9. 新对象的默认样式 (51)3.6. 首选项 > Enfocus PitStop Pro 首选项 > 色彩 (52)3.6.1. 更改色彩 (52)3.7. 首选项 > Enfocus PitStop Pro 首选项 > 语言 (54)3.7.1. 更改 PitStop Pro 用户界面的语言 (54)3.8. 首选项 > Enfocus PitStop Pro 首选项 > 字体 (55)3.9. 首选项 > Enfocus PitStop Pro 首选项 > 色彩管理 (55)3.9.1. 色彩管理简述 (55)3.9.2. 使用 ICC 配置文件进行色彩转换 (55)3.9.3. 使用色彩管理 (56)3.9.4. 使用色彩管理预设编辑器 (56)3.10. 首选项 > Enfocus PitStop Pro首选项 > 变量集 (56)3.10.1. 变量集概述 (57)3.11. 首选项 > Enfocus PitStop Pro 首选项 > 单位和参考线 (57)3.11.1. 单位和参考线 (57)3.12. 首选项 > Enfocus PitStop Pro 首选项 > 快捷键 (58)3.12.1. 创建快捷方式组 (59)3.12.2. 导出快捷方式组 (61)3.12.3. 导入快捷方式组 (61)3.12.4. 应用快捷方式组 (62)3.12.5. 保存并打印快捷方式组 (62)3.13. 首选项 > Enfocus PitStop Pro 首选项 > 窗口 (63)3.13.1. Windows (63)3.14. 首选项 > Enfocus PitStop Pro 首选项 > 警告 (63)Enfocus3.14.1. 警告信息 (63)3.15. 首选项 > Enfocus PitStop Pro 首选项 > 预设数据库 (63)3.15.1. 添加数据库文件夹 (63)3.16. 首选项 > Enfocus PitStop Pro首选项 > 许可 (64)3.17. 首选项 > Enfocus PitStop Pro 首选项 > 更新 (64)3.17.1. PitStop Pro更新通知 (64)3.18. 首选项 > Enfocus StatusCheck首选项 > 常规 (65)3.18.1. 主要和次要的高光色 (65)3.19. 首选项 > Enfocus StatusCheck首选项 > 语言 (65)3.20. 首选项 > Enfocus StatusCheck首选项 > 个人信息 (66)3.20.1. 姓名和详细联系信息 (66)3.21. 首选项 > Enfocus StatusCheck首选项 > 数据库 (66)3.21.1. 预检规范比较数据库 (66)3.21.2. 向预检规范比较面板添加文件夹 (66)3.22. 首选项 > Enfocus StatusCheck首选项 > 自动 (67)4. 查看 PitStop Pro 工作区域 (68)4.1. PitStop Pro 菜单的位置 (68)4.2. 指定 PitStop Pro 界面的语言 (68)4.3. PitStop 查看设置 (69)4.3.1. 在线框视图中查看 PDF 文档 (69)4.3.2. 显示或隐藏批注 (70)4.3.3. 使用替代图像加速图像显示 (70)4.4. Enfocus 预设管理器 (71)4.4.1. 预设数据库 (72)4.4.2. 管理预设 (73)4.5. 工作区 (76)4.5.1. 打开 Enfocus 工作区面板 (76)4.5.2. 默认工作区 (77)4.5.3. 使用工作区 (78)5. 处理 PDF 文档 (86)5.1. 复制并粘贴对象的属性 (86)5.1.1. 关于复制对象的属性 (86)5.1.2. 复制并粘贴对象的属性 (86)5.2. 撤销或重做动作 (87)5.2.1. 关于撤销和重做动作 (87)5.2.2. 撤销或重做动作 (87)5.2.3. 撤销和执行相反的动作 (87)5.3. 度量两点间的距离 (88)5.3.1. 替换对象 (88)5.4. 查看对象的属性 (89)目录5.4.1. 使用吸管工具查看对象的属性 (89)5.4.2. 使用 Enfocus 检查器 (89)5.5. 设计布局 (91)5.5.1. PitStop 页面框面板 (92)5.5.2. 打开 Enfocus 设计版面面板 (93)5.5.3. 默认设计版面 (93)5.5.4. 使用设计版面 (93)5.5.5. 页面框 (99)5.5.6. 参考线 (106)5.5.7. 区域 (108)5.6. 处理图层 (110)5.6.1. 关于图层 (110)5.6.2. 在 Enfocus 检查器中更改图层设置 (110)6. 预检和检查 PDF 文档 (112)6.1. 什么是预检？ (112)6.1.1. 预检的定义 (112)6.1.2. 预检规范 (112)6.1.3. 在中进行预检 PitStop Pro (112)6.2. 运行预检检查 (113)6.2.1. 管理预检规范 (114)6.2.2. 运行预检规范 (114)6.2.3. 常规和 Certified 预检检查的区别 (114)6.3. 报告问题 (115)6.3.1. 所定义的问题严重级别 (115)6.3.2. 问题的严重级别：示例 (116)6.4. 中预检规范的位置 PitStop Pro (116)6.4.1. 预检规范对话框 (116)6.4.2. Enfocus 预检规范编辑器 (118)6.5. 如何创建和编辑预检规范 (120)6.5.1. 创建和编辑预检规范 (120)6.5.2. 使用密码锁定预检规范 (134)6.6. 使用Enfocus 导航器 (135)6.6.1. 在错误、警告、修正和故障之间导航 (135)6.6.2. 使用Enfocus 导航器 (135)6.7. 查看并解释报告 (138)6.7.1. 报告内容 (138)6.7.2. 查看并解释报告 (139)6.8. 带批注的报告 (140)6.8.1. 关于带批注的报告 (140)6.8.2. 创建带批注的报告 (140)Enfocus6.8.3. 查看和检查带批注的报告 (140)6.8.4. 移除报告信息 (140)6.9. 自动预检 (141)6.9.1. Enfocus PitStop Server (141)6.9.2. Enfocus Switch (141)6.10. 智能预检 (141)6.10.1. 关于智能预检 (141)6.10.2. 智能预检入门 (142)6.10.3. 设置智能预检 (143)6.10.4. 在动作列表中使用智能预检变量 (154)6.10.5. 智能预检的故障排除 (155)7. 处理 Certified PDF 文档 (158)7.1. 了解 Certified PDF (158)7.1.1. PDF 工作流程概念 (158)7.1.2. 传统的 PDF 工作流程 (160)7.1.3. Certified PDF 工作流程 (160)7.1.4. 什么是 Enfocus Certified PDF 文档？ (162)7.2. 中 Certified PDF 功能的位置 PitStop Pro (162)7.3. 启动 Certified PDF 工作流程 (163)7.3.1. 设置个人信息 (163)7.3.2. 启动 PDF 文档的 Certified PDF 工作流程 (163)7.4. 添加会话注释 (167)7.5. 检查 Certified PDF 文件 (168)7.5.1. 检查 PDF 的 Certified PDF 状态 (168)7.5.2. 检验源文档 (169)7.5.3. 查看 Certified PDF 信息 (170)7.5.4. 比较 Certified PDF 预检规范 (171)7.5.5. 查看 Certified PDF 2 文档证书 (175)7.5.6. 查看编辑日志 (175)7.5.7. 查看文档历史 (176)8. 编辑对象 (181)8.1. 关于艺术线条和像素图像 (181)8.1.1. 计算机图形的类别 (181)8.1.2. 艺术线条 (181)8.1.3. 像素图像 (182)8.2. 关于路径、锚点和方向点 (183)8.2.1. 艺术线条元素 (183)8.2.2. 路径 (183)8.2.3. 锚点 (184)8.2.4. 方向点 (184)目录8.3. 选择对象 (185)8.3.1. 对象选择工具 (185)8.3.2. 选择一个或多个对象 (185)8.3.3. 选择相似对象 (187)8.3.4. 使用对象浏览器选择对象 (188)8.4. 分组和取消分组 (191)8.4.1. 关于分组和取消分组 (191)8.4.2. 分组对象 (191)8.4.3. 取消分组对象 (192)8.5. 对齐和分配 (192)8.5.1. 关于对齐和分配 (192)8.5.2. 对齐或分配对象 (193)8.5.3. 对齐和分配对象：按钮 (193)8.6. 隐藏和显示选定对象 (194)8.6.1. 隐藏对象的原因 (194)8.6.2. 隐藏所选对象 (194)8.6.3. 使所有隐藏对象可见 (195)8.7. 更改对象的层叠顺序 (195)8.7.1. 层叠对象 (195)8.7.2. 更改对象的层叠顺序 (195)8.8. 替换对象 (196)8.8.1. 关于替代对象 (196)8.8.2. 替换对象 (196)8.9. 更改或移除对象的 OPI 信息 (197)8.9.1. 关于开放式印前界面 (197)8.9.2. 更改或移除对象的 OPI 信息 (197)8.10. 更改对象的透明度 (197)8.10.1. 更改对象的透明度 (197)8.10.2. 移除透明度 (198)8.11. 查看和更改透明度组属性 (198)8.11.1. 查看透明度组的属性 (199)8.11.2. 更改透明度组的属性 (199)8.11.3. 透明度组的属性 (199)8.12. 更改文本或艺术线条对象的色彩 (200)8.12.1. 使用 Enfocus 检查器更改色彩 (200)8.12.2. 通过 Enfocus 转换色彩面板转换色彩 (205)8.13. 将渐变应用到文本或艺术线条对象 (206)8.13.1. 关于渐变 (206)8.13.2. 应用渐变 (207)8.13.3. 渐变：控制栏 (208)8.13.4. 渐变：选项和按钮 (208)Enfocus8.13.5. 示例：将线性渐变应用到艺术线条对象 (209)8.13.6. 示例：将线性渐变应用到文本 (210)8.13.7. 示例：将辐射状渐变应用到艺术线条对象 (211)8.14. 使用色彩数据库 (213)8.14.1. 使用用户样本 (213)8.14.2. 将色彩添加到本地色彩数据库 (213)8.14.3. 将色彩数据库中的某一色彩应用到文本或对象 (213)8.14.4. 导入和导出色彩数据库 (214)8.15. 旋转对象 (215)8.15.1. 旋转原点 (215)8.15.2. 使用选择控点通过拖动旋转对象 (215)8.15.3. 使用旋转所选对象工具通过拖动旋转对象 (217)8.15.4. 通过指定旋转角度来旋转对象 (218)8.16. 缩放对象 (218)8.16.1. 使用选择控点通过拖动缩放对象 (219)8.16.2. 使用缩放所选对象工具通过拖动缩放对象 (221)8.17. 移动对象 (223)8.17.1. 通过拖动来移动对象或对象的副本 (223)8.18. 倾斜对象 (225)8.18.1. 关于倾斜 (225)8.18.2. 使用倾斜所选对象工具倾斜对象 (226)8.18.3. 使用选择控点倾斜所选对象 (227)8.19. 通过指定确切的值来转换对象 (229)8.19.1. 通过指定确切的值来转换对象 (229)8.20. 组合和拆分对象的形状 (230)8.20.1. 组合多个对象的形状 (231)8.20.2. 将形状拆分为多个部分 (231)8.20.3. 组合/拆分形状：示例 (232)8.21. 创建新形状 (233)8.21.1. 绘制椭圆和矩形 (233)8.21.2. 创建新形状 (233)8.22. 创建新路径 (234)8.22.1. 创建新路径 (234)8.23. 编辑路径 (235)8.24. 创建偏移路径 (239)8.24.1. 创建偏移路径 (239)8.24.2. 偏移路径：示例 (240)8.25. 将描边转换为填充 (241)8.25.1. 将描边转换为填充 (241)8.26. 裁剪艺术线条 (242)8.26.1. 裁剪艺术线条 (242)目录8.26.2. 裁剪到剪贴：示例 (243)8.27. 跟踪对象 (244)8.27.1. 跟踪对象 (245)8.27.2. 跟踪对象：示例 (246)8.28. 添加或移除锚点 (248)8.28.1. 添加或移除锚点的原因 (248)8.28.2. 添加锚点 (248)8.28.3. 移除锚点 (248)8.29. 蒙版对象 (249)8.29.1. 关于中的蒙版 PitStop Pro (249)8.29.2. 为对象加上蒙版 (249)8.29.3. 释放蒙版 (250)8.30. 检查软蒙版 (250)8.30.1. 检查软蒙版 (250)8.30.2. 软蒙版类型 (251)8.30.3. 图像蒙版分辨率 (251)8.30.4. 蒙版视图模式 (251)8.31. 查看像素图像的属性 (253)8.31.1. 像素图像的属性 (253)8.31.2. 查看像素图像的属性 (253)8.32. 调整像素图像的亮度和对比度 (253)8.32.1. 关于调整亮度和对比度 (253)8.32.2. 示例：对亮度和对比度进行简单调整 (254)8.32.3. 示例：对亮度进行高级调整（= 曲线编辑） (255)8.32.4. 曲线编辑：选项和按钮 (256)8.33. 锐化像素图像 (257)8.33.1. 关于锐化像素图像 (257)8.33.2. 示例：锐化像素图像 (257)8.33.3. 未锐化蒙版过滤器：选项 (258)8.34. 对像素图像重新取样 (258)8.34.1. 关于重新取样 (258)8.34.2. 对图像进行下取样的原因 (259)8.34.3. 插值法 (259)8.34.4. 均值重新取样 (259)8.34.5. 二次取样 (259)8.34.6. 两次立方取样 (259)8.34.7. 两次线性取样 (259)8.34.8. 两次立方 B 样条取样 (260)8.34.9. 对单个图像重新取样 (260)8.34.10. 对多个图像重新取样 (260)8.35. 压缩像素图像 (261)Enfocus8.35.1. 关于压缩 (261)8.35.2. 压缩方法 (261)8.35.3. ASCII 过滤器 (262)8.35.4. 压缩单个图像 (262)8.36. 查看选定对象的统计信息 (263)8.36.1. 关于统计信息 (263)8.36.2. 查看选定对象的统计信息 (263)8.37. 查看对象的半调信息 (263)8.37.1. 关于半调信息 (263)8.37.2. 查看对象的半调信息 (264)8.38. Enfocus 搜索和替换文本 (264)8.38.1. 搜索和替换文本 (264)8.39. 选择文本 (265)8.39.1. 文本还是文本片段？ (265)8.39.2. 选择单个文本片段 (265)8.39.3. 选择多个相邻的文本片段 (266)8.39.4. 选择多个不相邻的文本片段 (266)8.39.5. 选择具有相似属性的文本片段 (267)8.39.6. 在单个文本行中选择文本 (267)8.39.7. 在一个段落的多行中选择文本 (268)8.40. 编辑单个文本行 (268)8.40.1. 创建或编辑单个文本行 (268)8.41. 编辑文本段落 (269)8.41.1. 段落是一种逻辑文本实体 (269)8.41.2. 编辑文本段落 (269)8.42. 编辑竖排文本 (270)8.42.1. 关于竖排文本 (270)8.42.2. 编辑竖排文本行 (270)8.43. 更改文本的字体属性 (271)8.43.1. 什么是字体属性？ (271)8.43.2. 更改文本的字体属性 (271)8.44. 将文本转换为轮廓 (272)8.44.1. 关于将文本转换为轮廓 (272)8.44.2. 将文本转换为轮廓的原因 (272)8.44.3. 将文本转换为轮廓的注意事项 (272)8.44.4. 将文本转换为轮廓 (273)8.45. 分割和合并文本片段 (274)8.45.1. 将文本片段分割并合并为单词或字符 (274)8.45.2. 分割或合并文本片段 (274)8.46. 字体类型及其使用 (275)8.46.1. 字体类型 (275)目录8.46.2. 14 种标准字体 (275)8.46.3. PostScript Type 1 字体 (276)8.46.4. PostScript Type 3 字体 (276)8.46.5. TrueType 字体 (277)8.46.6. Multiple Master 字体 (277)8.46.7. OpenType 字体 (278)8.46.8. 复合字体 (279)8.47. PDF 字体替换 (279)8.47.1. 字体可用性 (279)8.47.2. 查找 PostScript 字体名称 (280)8.48. 嵌入字体和嵌入子集字体 (280)8.48.1. 嵌入字体 (280)8.48.2. 嵌入子集字体 (280)8.48.3. 查找准确的字体名称 (281)8.49. 在 PDF 文档中放置 PDF 文档 (281)8.49.1. 关于在 PDF 文档中放置 PDF 文档 (281)8.49.2. 将一个 PDF 文档放入另一个 PDF 文档： (281)8.50. 编辑表单 (282)8.50.1. 关于表单 (282)8.50.2. 编辑表单 (282)8.50.3. 编辑表单内的单个对象 (283)8.50.4. 编辑表单本身和/或表单中的全部内容 (283)8.51. 栅格化选择 (284)8.51.1. 关于栅格化图像 (284)8.51.2. 栅格化选择 (284)9. 使用动作列表、全局变更和 QuickRun 自动执行任务 (287)9.1. 使用动作列表自动执行任务 (287)9.1.1. 关于动作和动作列表 (287)9.1.2. 找到动作和动作列表的位置 (289)9.1.3. 使用动作列表 (294)9.1.4. 管理动作列表 (313)9.1.5. 使用动作列表 Visualizer 对动作列表进行故障排除 (316)9.1.6. 动作列表的实际应用 - 使用示例 (321)9.2. 使用全局变更 (324)9.2.1. 关于全局变更 (324)9.2.2. 找到全局变更的位置 (325)9.2.3. 进行全局变更操作 (329)9.2.4. 检查全局变更的结果 (333)9.3. 使用 QuickRun (338)9.3.1. 关于 QuickRun (338)Enfocus9.3.2. 在中找到 QuickRun 的位置 PitStop Pro (338)9.3.3. 使用 QuickRun (343)9.4. 更多的自动执行功能 (348)9.4.1. Enfocus PitStop Server (348)9.4.2. Enfocus Switch (348)10. 管理色彩 (349)10.1. 关于色彩管理 (349)10.2. 色彩模式 (349)10.2.1. RGB 色彩模式 (349)10.2.2. CMYK 色彩模式 (349)10.2.3. 灰度模式 (350)10.3. 色域和色彩空间 (350)10.3.1. 色域：色谱中与设备有关的色彩子集 (350)10.3.2. 依赖于设备的色彩 (351)10.3.3. 独立于设备的色彩 (351)10.4. 渲染意图 (351)10.4.1. 用于重新映射色彩的渲染意图 (351)10.4.2. 视感重新映射 (351)10.4.3. 饱和度重新映射 (352)10.4.4. 相对比色重新映射 (352)10.4.5. 绝对比色重新映射 (353)10.4.6. 更改图像的渲染意图 (353)10.5. 使用专色 (354)10.5.1. 关于专色 (354)10.5.2. 创建专色 (354)10.5.3. 应用专色 (355)10.5.4. 编辑专色 (355)10.5.5. 重新映射专色 (355)10.5.6. 复制专色 (356)10.6. 使用 ICC 配置文件 (357)10.6.1. 关于 ICC 配置文件 (357)10.6.2. 在多个实例中使用 ICC 配置文件 (357)10.6.3. 用 ICC 配置文件标记文本或艺术线条或去除标记 (357)10.6.4. 使用 ICC 配置文件作图像标记或去除图像标记 (358)10.7. 使用输出目标面板 (358)10.7.1. 应用输出目标 (358)10.7.2. 编辑输出目标模板 (358)10.7.3. 创建新的输出目标模板 (359)10.7.4. 检查当前应用的输出目标 (359)10.8. 颜色转换 (359)目录10.8.1. 转换为色彩空间 (359)10.8.2. 重新映射色彩 (361)10.8.3. 使用 Enfocus 检查器转换色彩 (362)11. 叠印 (364)11.1. 叠印和挖空的简单原理 (364)11.1.1. 基本规则 (364)11.1.2. 简单原理示例 (364)11.1.3. 不同的色彩，相同的油墨 (365)11.2. 叠印和挖空的细节关键 (367)11.2.1. 决定性因素 (367)11.2.2. 色彩空间 (367)11.2.3. 叠印模式和对象类型 (368)11.3. 叠印行为的常见缺陷 (370)11.3.1. 示例1：标准叠印模式中专色背景上的 CMYK 对象 (370)11.3.2. 示例2：叠印在带有 ICC 标记的 CMYK 背景上的双色调对象 (371)11.3.3. 示例3：CMYK 背景上的 CMYK 文本 (371)11.3.4. 示例4：CMYK 背景上的灰色对象 (373)11.3.5. 示例 5：色彩空间的效果 (374)11.4. 更改对象的叠印设置 (375)11.4.1. 黑色文本叠印 (375)11.4.2. 挖空白色文本 (376)11.4.3. 更改对象的叠印设置 (377)11.4.4. 强制叠印所有分色 (378)12. 第三方许可信息 (380)13. Copyrights (393)1. PitStop Pro 文档概述完整的 PitStop Pro 文档包括多个部分。

安裝指南SOLIDWORKS PDM 2019/SOLIDWORKS Manage 2019目錄法律注意事項 (8)1SOLIDWORKS PDM與SOLIDWORKS Manage安裝指南 (11)2安裝概要 (13)必要安裝元件 (14)選用的安裝元件(僅適用於SOLIDWORKS PDM Professional) (16)SOLIDWORKS PDM部署案例 (16)系統需求 (19)安裝摘要 (19)安裝協助 (20)3安裝與組態SQL Server (21)SQL Server2016和SQL Server2017支援 (21)安裝SQL Server2016或SQL Server2017 (22)在安裝SQL Server2016或SQL Server2017之前 (22)執行SQL Server2016或SQL Server2017安裝 (22)安裝SQL Server2016或SQL Server2017之後 (25)確認SQL Server2016或SQL Server2017安裝 (25)升級為SQL Server2016或SQL Server2017 (26)執行SQL Server2016或SQL Server2017升級 (26)升級為SQL Server2016或SQL Server2017後 (28)SQL Server2014支援 (28)安裝SQL Server2014 (28)安裝SQL Server2014之前 (28)執行SQL Server2014安裝 (29)安裝SQL Server2014之後 (33)確認SQL Server2014安裝 (33)升級至SQL Server2014 (33)執行升級至SQL Server2014 (34)升級至SQL Server2014之後 (36)安裝SQL Server2012 (37)安裝SQL Server2012之前 (37)執行SQL Server2012安裝 (37)安裝SQL Server2012之後 (41)確認SQL Server2012安裝 (41)升級至SQL Server2012 (41)執行SQL Server2012的升級 (41)升級至SQL Server2012之後 (43)SQL Server疑難排解 (44)客戶端無法在檔案資料保險箱中工作 (44)SOLIDWORKS PDM管理功能失敗 (44)SOLIDWORKS PDM無法連接至伺服器 (44)變更SQL Server登入帳戶 (45)產生新的SQL登入帳戶 (45)在SOLIDWORKS PDM保存檔上使用新的SQL登入 (45)給予SQL使用者對現有SOLIDWORKS PDM檔案資料保險箱資料庫的db_owner存取權限 (46)不足的SQL權限 (47)4安裝與設定SQL Server Express (48)SQL Server2014Express支援 (48)安裝及管理SQL Server2014Express (48)安裝SQL Server2014Express之前 (49)安裝SQL Server Express資料庫引擎 (49)安裝SQL Server2014Express之後 (52)確認SQL Server2014Express安裝 (53)將SQL Server Express2014升級為SQL Server2014 (53)5安裝SOLIDWORKS PDM (54)初始化SOLIDWORKS PDM安裝 (54)安裝SOLIDWORKS PDM資料庫伺服器 (56)安裝資料庫伺服器之前 (56)執行資料庫伺服器安裝 (56)安裝SOLIDWORKS PDM保存檔伺服器 (57)安裝保存檔伺服器之前 (58)執行保存檔伺服器安裝 (58)開啟客戶端/伺服器通訊的連接埠 (62)在WAN環境中新增保存檔伺服器 (63)安裝與組態SolidNetWork使用許可 (65)安裝SolidNetWork License Manager (65)啟動SolidNetWork License (65)使用SolidNetWork License伺服器與防火牆 (66)SolidNetWork使用許可管理 (67)Licensing (70)安裝SOLIDWORKS PDM Web伺服器 (74)安裝SOLIDWORKS PDM Web2(僅限SOLIDWORKS PDM Professional) (74)安裝Web2之前 (74)執行Web2Server安裝 (77)在執行Web2的IIS伺服器上產生資料保險箱視圖 (78)設定SOLIDWORKS PDM Web2 (78)安裝SOLIDWORKS PDM Web API伺服器(限SOLIDWORKS PDM Professional) (88)執行Web API伺服器安裝 (88)安裝SOLIDWORKS PDM客戶端 (89)安裝客戶端之前 (90)使用安裝精靈安裝客戶端 (91)安裝eDrawings (93)將SOLIDWORKS PDM Standard客戶端/伺服器升級為Professional (93)啟用記錄以排解安裝問題 (93)產生SOLIDWORKS PDM客戶端管理安裝點 (94)使用Windows Active Directory部署客戶端 (95)在部署SOLIDWORKS PDM時啟用記錄 (96)編寫SOLIDWORKS PDM的無訊息安裝指令碼 (97)6使用SOLIDWORKS安裝管理員 (100)SOLIDWORKS PDM (100)PDM伺服器元件的清單 (101)瞭解PDM客戶端之間的差異 (102)安裝PDM Server之前 (103)安裝PDM伺服器與SLDIM (104)安裝PDM客戶端與SLDIM (105)7產生與發送檔案資料保險箱視圖 (107)產生資料保險箱 (107)先決條件 (107)加入保存檔伺服器 (108)登入保存檔伺服器 (108)產生資料保險箱 (109)設定檔案資料保險箱的SolidNetWork License伺服器 (114)使用視圖設定精靈產生檔案資料保險箱視圖 (115)在有Windows防火牆時啟用廣播 (117)將共用檔案資料保險箱視圖與多個使用者設定檔搭配使用 (117)在終端機伺服器上使用SOLIDWORKS PDM (118)產生檔案資料保險箱視圖設定檔案 (119)編寫檔案資料保險箱視圖設定指令碼 (120)使用Microsoft Windows Active Directory散佈檔案資料保險箱視圖 (120)尋找SOLIDWORKS PDM資料保險箱ID (122)在WAN環境中散發檔案資料保險箱視圖 (123)手動組態向SOLIDWORKS PDM客戶端宣告的保存檔伺服器 (123)指定SOLIDWORKS PDM手動設定群組原則 (123)SOLIDWORKS PDM設定原則選項 (124)8將資料保險箱從Standard升級成Professional (127)將SolidNetWork使用許可從Standard升級成Professional (127)啟動Professional使用許可 (128)升級Standard資料保險箱 (129)將SOLIDWORKS PDM Standard客戶端/伺服器升級為Professional (129)升級檔案資料保險箱之後 (129)9設定內容搜尋(僅適用於SOLIDWORKS PDM Professional) (131)內容搜尋概要 (131)建議的電腦組態 (132)使用Windows搜尋來執行內容搜尋 (132)安裝WindowsSearch服務 (132)於Windows7上啟用Windows Search服務 (133)在Windows Server2008R2上啟用Windows Search服務 (133)在Windows Server2012上啟用Windows Search服務 (133)設定Windows搜尋 (133)編制Windows Search的保存檔索引 (134)使用Microsoft索引服務執行內容搜尋 (134)確認Microsoft索引服務的安裝 (135)監控及微調Microsoft編制索引的服務 (135)編制SOLIDWORKS PDM Professional檔案資料保險箱保存檔的索引 (135)在非SQL Server系統上組態索引服務 (136)新增索引伺服器濾器 (138)壓縮保存檔(gzip)濾器 (138)管理檔案資料保險箱索引目錄 (138)移除檔案資料保險箱索引 (139)10備份與回復檔案資料保險箱 (140)備份檔案資料保險箱資料庫 (140)備份SOLIDWORKS PDM主資料庫 (141)備份保存檔伺服器設定 (141)備份保存檔案 (142)排定資料庫備份 (142)啟動SQL Server Agent (142)設定資料庫備份的維護計劃(僅適用於SOLIDWORKS PDM Professional) (143)回復SQL Server檔案資料保險箱資料庫 (145)確認ConisioMasterDb回復 (146)回復保存檔伺服器與檔案資料保險箱保存檔 (146)11升級SOLIDWORKS PDM (147)關於Enterprise PDM升級 (147)升級之前 (147)判斷目前版本 (148)決定已被套用的更新 (149)升級保存檔伺服器 (149)升級資料庫伺服器 (149)安裝或升級SolidNetWork License Manager (151)升級檔案資料保險箱 (152)升級檔案資料保險箱資料庫 (152)升級檔案資料保險箱保存檔 (153)升級SOLIDWORKS PDM中的Toolbox (159)12升級SOLIDWORKS檔案 (161)升級SOLIDWORKS檔案 (161)所需的升級公用程式軟體 (162)系統需求 (162)安裝檔案版本升級公用程式 (163)準備升級 (163)選擇版本設定 (164)產生檔案的新版本 (165)覆寫檔案的現有版本 (168)執行一試做的檔案升級 (176)執行升級公用程式 (176)產生及使用工作指示檔案 (177)完成中斷的升級 (178)升級之後 (178)升級記錄檔的檔案名稱格式 (179)管理備份檔案 (179)備份檔案的產生 (179)從備份中復原一被不正確升級的版本 (180)13其他組態 (181)管理SQL交易記錄檔大小 (181)變更為簡單復原模式 (181)壓縮交易記錄檔 (181)組態SOLIDWORKS PDM以便僅使用IP位址進行通訊 (182)更新保存檔伺服器以使用IP位址進行通訊 (182)更新SQL Server以使用IP位址進行通訊 (182)更新SOLIDWORKS PDM客戶端以使用IP位址進行通訊 (183)確認IP位址通訊 (183)將伺服器元件移至其他系統 (183)將檔案複製到新伺服器 (184)組態移動的SQL檔案資料保險箱資料庫 (184)移動SolidNetWork License Manager (185)移動SOLIDWORKS PDM資料庫伺服器 (185)組態移動的保存檔伺服器 (186)更新客戶端登錄機碼 (187)更新複製的設定(僅適用於SOLIDWORKS PDM Professional) (187)確認伺服器移動 (188)14安裝SOLIDWORKS Manage Professional (189)SOLIDWORKS Manage Server零組件的清單 (189)SOLIDWORKS Manage客戶端類型及使用許可 (190)SOLIDWORKS Manage的使用先決條件和系統需求 (191)針對SOLIDWORKS Manage使用SOLIDWORKS安裝管理員 (192)安裝SOLIDWORKS Manage Server (192)安裝SOLIDWORKS Manage Client (193)編輯SOLIDWORKS Manage組態檔案 (193)15設定SOLIDWORKS Manage Professional和Microsoft IIS (195)首次登入SOLIDWORKS Manage (195)使用適用於SOLIDWORKS PDM的SOLIDWORKS Manage附加程式 (198)使用適用於SOLIDWORKS的SOLIDWORKS Manage附加程式 (198)設定IIS (199)確認IIS檔案伺服器 (200)疑難排解IIS (200)法律注意事項©1995-2018,Dassault Systemes SolidWorks Corporation,a Dassault Systèmes SE company, 175Wyman Street,Waltham,Mass.02451USA.All Rights Reserved.本文件中提及的資訊和軟體如有更改，恕不另行通知，Dassault Systemes SolidWorks Corporation (DS SolidWorks)不負任何責任。

软件安装管理器-音速启动(VStart) 5.0 **专用皮肤，简单皮肤
可以不用自己改ini文件那么麻烦。

直接在软件上点击就能完成。

支持绝对路径转相对路径。

使用方法：
解压软件包（压缩包只是音速软件，安装软件要自己收集）到U盘目录，如上图。

双击打开【软件安装.exe】
1、添加软件，在空白处点击鼠标右键，添加文件。

浏览到软件安装程序
2、批量改路径，
全选所有软件，右键，批量操作
修改路径，转为相对路径。

修改图标，转为相对路径。

这样不论U盘拿到哪都能用了。

3、关于创建分类，点左下方的分类按钮，弹出类别管理菜单，点新建
新建的分类里面还不能添加软件，在空白处双击鼠标，新建栏目，才能添加软件。

功能很强大，其他功能自己摸索吧。

下载地址：
/space/file/yxl2/-4e0a-4f20-5206-4eab/-8f6f-4e f6-5b89-88c5-7ba1-7406-5668-002d-97f3-901f-542f-52a8(VStart)_5.0.rar/ .page。

IntroductionThe Blackwing BW 635RG is an ultralight two-seater aeroplane designed for recreational flying and training purposes. It features a sleek and modern design, with a composite airframe and a low-wing configuration. The Blackwing has a cruising speed of up to 120 knots and a range of approximately 700 nautical miles, making it suitable for both short and long-distance flights. The cockpit is equipped with state-of-the-art avionics, including a glass cockpit display and an autopilot system. The Blackwing is also known for its superior handling and stability, making it a popular choice among flying enthusiasts and flight schools. The BW 635RG is powered by the venerable Rotax 915 iS engine.Development Credits:Mal Cartwright Product LeadRuss White3D Modelling, Interior and Exterior TexturingJack Lavigne IntegrationHarry Stringer AnimationPropAir Flight Model and SystemsJordan Gough ManualWith special thanks to our Beta Testers:Rob Abernathy John BurgessNick Cooper John DowMatt McGee Darryl WightmanTable of ContentsIntroduction (2)Development Credits: (2)With special thanks to our Beta Testers: (2)Table of Contents (3)Notes on Hardware (4)Overview (5)Aircraft Limitations (6)Airspeed Limitations (6)Engine Limitations (6)Operating Conditions (6)Fuel (7)Other Limitations (7)Emergency Procedures (8)Engine Failure on the Take-off Roll (8)Engine Failure after Take-off (8)Glide Performance (8)Emergency Landing (9)Spin Recovery (9)Normal Procedures (10)Before Starting Engine (10)Starting Engine (10)Before Taxiing (11)Taxiing (11)Engine Runup (11)Before Take-off (11)Take-Off (12)Initial Climb (12)Cruise Climb (12)Cruise (12)Landing (13)Balked Landing (13)After Landing (13)Securing Aircraft (14)Basic Performance (15)Stall Speeds (15)Take-Off Performance (15)Landing Performance (16)Systems Description (17)Instrument Panel Layout (17)Switch Logic and Electrical System (18)Master Switch (18)Fuel Pump Switch (19)LAND/TAXI Switch (19)Strobe/Nav Switch (19)Electrical System Diagram (20)Engine (21)Propeller (21)Fuel (21)Notes on HardwareDue to the unusual 3-position switches in this aircraft, conventional hardware 2position toggle switches (eg. strobe or nav light switches) cannot be translated tothe single 3-position switch which combine these.Additionally, as this aircraft utilises a single level power control (throttle), conventional throttle/prop/mixture hardware may interfere with the function of this system, and not work as intended. It is recommended to place your propeller and mixture levers in the IDLE position, and not move them while the engine is running.OverviewThe Orbx BW 635RG has been developed using official documentation and Computer Aided Design (CAD) resources from Blackwing Sweden. As a result, the aeroplane has been created through masterful modelling, texturing, systems integration, and flight model development.Figure 1 – Aircraft 3-viewAircraft DimensionsLength 6.6m Height 2.2m Wingspan8.4mWeightsBasic Empty Weight 375kg Maximum Take-off Weight 600kg Maximum Fuel Capacity (Litres)130LThe content in this manual and the operation of the BW 635RG in Microsoft Flight Simulator strictly must not be used as reference material in any form for operating the real aircraft.Aircraft LimitationsAirspeed LimitationsAirspeed Description Airspeed (KIAS) RemarksVne Never Exceed Speed 157 Must not exceed this speed in any operation.Va Manoeuvring Speed 109 If full or abrupt control deflection is made, the airframe may be overstressed.Vfe1 Max flap extended speed20 degrees90 Maximum speed for flaps 20°Vfe2 Max flap extended speed35-45 degrees 70 Maximum speed for flaps 35-45°Vlo Maximum landing gearoperating speed 70Do not extended or retract the landing gearabove this speed.Vle Maximum landing gear extended speed 90 Do not exceed this speed with the landing gearalready down.Vs0 Stall speed flaps/gearextended 38 Stall speed with gear down/flaps >0° and in level flight at MTOWVs1 Stall speed clean 49 Stall speed flaps retracted, gear up and in level flight at MTOWEngine LimitationsEngineEngine Manufacturer Rotax Engine Model Rotax 915 iSMaximum Power Take-off (Max 5 min.) 141 hp Continuous 135 hpMaximum RPM Take-off (Max 5 min.) 5800 Continuous 5500Critical Altitude 15000ft AMSL Maximum OperatingAltitude23000ft AMSL Operating ConditionsAerobatic manoeuvres, flight in IFR conditionsand flights in icing conditions are prohibited inthis aircraft.FuelFuel TanksLeft Right Litres US Gal Litres US GalTotal Fuel in Tank 67.5 17.8 62.5 16.5Unusable Fuel 2.5 0.7 2.5 0.7 Total Useable Fuel in Tanks 66.5 17.6 61.5 16.2Other LimitationsMaximum demonstrated crosswind for the BW 635RG is 20 knots.Emergency ProceduresNote: The following procedures have been modified to be suitable for simulation. It does not cover emergencies that are a) not simulated and b) not reasonable. Checklist items from the real procedures have been omitted and these procedures must not under any circumstances be used for training purposes.Engine Failure on the Take-off RollThrottle: IDLEIgnition: OFFFuel Pump: MAIN (DOWN POS)Brakes: APPLYWhen stopped: SECURE AIRCRAFTEngine Failure after Take-offNose: IMMEDIATELY LOWERAirspeed: 65 KNOTSLanding Area: DETERMINE WITHIN 30° OF NOSEFlaps: USE AS REQUIREDLanding Gear: USE DESCRETIONFuel Selector: OFFIgnition: OFFMaster Switch: OFFGlide PerformanceThe BW 635RG, the approximate performance for a glide is 65 KIAS which willgive approximately a 545ft/min rate of descent in the clean configuration.Glide performance will degrade significantly on extension of flaps and landinggear.Emergency LandingAirspeed: 65 KIASField: PICK BEST OPTIONLanding Gear: USE DISCRETION DEPENDING ON FIELD TYPEFlaps: AS REQUIREDFuel Selector: OFFIgnition: OFFFuel Pump: MAIN (down)Master Switch: OFF BEFORE LANDINGSpin RecoveryThrottle: IDLEControl Stick: AILERON NEUTRALRudder: FULL OPPOSITE TO DIRECTION OF ROTATIONControl Stick: POSITIVELY FORWARD OF NEUTRALRudder: NEUTRAL WHEN ROTATION STOPSControl Stick: SMOOTHLY PULL OUT OF DIVEWARNING:INTENTIONAL SPINS ARE NOT APPROVED INTHIS AIRCRAFT.Normal ProceduresNote: The pre-flight inspection portion of the normal procedures has been removed due to impracticality in the simulator.Before Starting EngineIgnition: OFFMaster Switch: OFF (down)Backup Battery: OFF/AUTO (down)Landing Gear Lever: DOWNCircuit Breakers: INCanopy CLOSED (CLICKING THE LATCHON THE INSIDE LEFT SIDEWALL.) Starting EngineParking Brake: HOLD TOE BRAKES AND ENGAGE PARKINGBRAKEMaster Switch: ENGINE START (middle position)Fuel Selector: SETFuel Gauge: CHECKFuel Pump: BOTH (up)Ignition: BOTHNav Lights: STROBE (middle position)Throttle: SET ½-1 INCH OPENIgnition: STARTOil Pressure: GREEN WITHIN 10 SECWarnings: NONEBefore TaxiingMaster Switch: NORMAL OPERATION (up)Altimeter: SETAvionics: SETParking Brake: DISENGAGETaxiingInstruments: CHECKED (COMPASS/HSI/BALL/ATT) Engine RunupParking Brake: ENGAGERPM: 2500 RPMFuel Pump: CYCLE, CHECK FUEL PRESSUREIdle: CHECK IDLE 1800 +/- 100 RPM Before Take-offCanopy: CLOSED AND LOCKEDFlaps: 1 STAGE (20°)Elevator Trim: SET FOR TAKE-OFFEngine Instruments: NORMALLanding Light: ON (up)Controls: FULL FREE AND CORRECT MOVEMENTParking Brake: DISENGAGETake-OffThrottle: FULLControls: NEUTRAL45 Knots: ROTATEAccelerate: NOSE ON HORIZON, ACCEL TO 80 KIASPositive Rate of Climb: GEAR UPLanding Light: OFF (down)Flaps: RETRACT ABOVE 500’ AGLInitial ClimbThrottle: MAX CONTINUOUS (5500 RPM)Airspeed: 90 KIASFuel Pump: MAIN (down) ABOVE 500’ AGL Cruise ClimbThrottle: MAX CONTINUOUS (5500 RPM)Airspeed: 130 KIASCruiseThrottle: 55-75% PowerAirspeed: 120-157 KIAS (<130 KIAS IN TURB)LandingFuel: QTY CHECKEDFuel Selector: FULLEST TANKFuel Pump: BOTH (up position)Airspeed: 90 KIASFlaps: EXTEND FLAP 1 <90 KIASDownwind Airspeed: 65 KIASLanding Gear: DOWN @ 65 KIAS; CHECK 3 GREENLanding Light: ON (up position)Base Leg: EXTEND FLAP 2 < 65 KIASFinal Approach Airspeed: 60 KIASBalked LandingThrottle: SMOOTHLY INCREASEAirspeed: 60 KIASTrim: COURSE TRIM TO RELIEVE PRESSUREFlaps: RETRACT TO POSITION 1 (20°)Gear: UPTrim: TRIM FOR CLIMBAfter LandingFlaps: RETRACTExterior Lights: AS REQ’DFuel Pump: MAIN (down)Securing AircraftParking Brake: ENGAGEDThrottle: IDLESwitches: ALL OFF EXCEPT ACL AND MASTERIgnition: OFFNav Lights: OFF (down)Master Switch: OFFBasic PerformanceStall SpeedsMTOW 600kg | CG 32% MAC | Power Idle | Level FlightFlap Position Stall Speed (KIAS) 0° 49 20° 44 35° 39 45°38Take-Off PerformanceMTOW | ISA CONDITIONS | SEA LEVEL | FLAPS 1 (20°) | MTOW (600kg)Cruise PerformanceRunway Surface Ground RollOver 50ft Obstacleft mft mPaved Runway328 100 656 200 Unpaved (Grass) Runway 361110689208Pressure Altitude Power (%) TAS Fuel Flow LPH MAP (inHg) Endurance(hr)Range (nm) 500055 161 19.7 30 5.8 941 65 170 23.3 34.1 4.9 827 7517826.937.44.1738Landing PerformanceMTOW | ISA CONDITIONS | FLAPS 2 (35°) | MTOW (600kg) | Speed 1.3 x VsoRunway Surface Ground Roll Over 50ft Obstacle ft m ft mPaved Runway 525 160 951 290 Unpaved (Grass) Runway 558 170 984 300Systems Description Instrument Panel LayoutSwitch Logic and Electrical SystemThe electrical switches in the BW 635RG are 3-position switches. These are generally known as “DOWN”, “MIDDLE” and “UP”. They are briefly explained below.Master SwitchThe MASTER switch functions in a unique way, with the following switch logic:1.When the MASTER switch is DOWN, all battery power is off. There will beno electrical power provided to the aircraft.•Note: The engine CANNOT be shut down when the master switch isoff. Electrical power must be present for the engine to turn off.2.When the MASTER switch is in the MIDDLE (Engine Start) position, limitedsystem functionality will be present. The backup battery will be activatedand power the following systems:•Primary Flight Display•Compass•AHRS (Attitude Heading Reference System)•Radio3.When the MASTER switch is UP (Normal Operation), full electrical supplywill be provided to the aircraft. The following systems will be powered on: •Note: the engine CANNOT be started with the MASTER switch in theUP position. If the engine won’t start, check the switch is in theMIDDLE position•Multi-Function Display•Transponder•Autopilot•Audio panel•STBY instruments•Pitot Heat•Main battery is disconnected from running engine. Alternatorprovides power.See Section NORMAL PROCEDURES for positioning of the MASTER switch.Fuel Pump SwitchThe Fuel Pump switch also has some advanced logic to it, due to two fuel pumpsbeing present, however, to put it simply, it operates in the following way:1.In the DOWN position, the main fuel pump is in use.2.In the MIDDLE position, the auxiliary fuel pump is in use.3.In the UP position, both fuel pumps will be on.LAND/TAXI SwitchThe LAND/TAXI switch powers the Taxi and Landing lights. It operates in the following logic:1.In the DOWN position, both lights will be OFF.2.In the MIDDLE position, the taxi light will switch on when the landinggear is extended.3.In the UP position, the Landing Light will switch on when the landinggear is extended.Strobe/Nav SwitchThe Strobe/Nav switch powers the Navigation (Red/Green) and Strobe (flashingwhite) lights. It operates in the following logic:1.In the DOWN position, both lights will be OFF.2.In the MIDDLE position, the STROBE light will be on.3.In the UP position, both the strobe and Nav lights will be on.Electrical System DiagramThe BW 635RG’s electrical system is modelled in the following way in Microsoft Flight Simulator.Because the starter system is connected to the BACKUP BUS, this means you cannot start the engine with the MASTER switch in the UP position, due to the BACKUP BUS being disconnected from the circuit once the MAIN BAT BUS is powered.Page 21 of 21User Guide v1.0 –RevisionEngineThe BW 635RG is powered by the Rotax 915iS. The Rotax 915iS is a four-stroke, four-cylinder, fuel-injected, turbocharged aircraft engine with a maximum power output of141 horsepower. The engine utilizes electronic fuel injection (EFI) technology toprovide precise fuel delivery and improved fuel efficiency. It also features a modernliquid-cooling system and a dual electronic ignition system for reliable performance.The Rotax 915iS engine has a maximum operating RPM of 5,200, with a recommended continuous operation range of 5,000 RPM or less.PropellerThe propeller is a 3-blade wood-composite design, which is hydraulically adjustable for operation at various pitch angles, controlled independently of the pilot. The propeller is linked to the engine through an electronically controlled governor, where RPM isadjusted in accordance with the position of the throttle control. This pitch curve cannot be adjusted in flight, however is designed to ensure maximum performance in allphases of flight.FuelBoth wings have fuel tanks, which are fed to the engine via electric fuel pumps. Fuelsystem information is fed via sensors to the Garmin avionics suite and can be viewedon the displays inside the cockpit.AIRPLANE WEIGHTSBasic Empty Weight……………………….…375 KgMaximum Takeoff Weight…………………..600 KgMaximum Fuel Weight………………………...95 Kg Maximum Landing Weight………………….600 Kg TANK USABLE FUEL LEFT WING TANK67.5 litres 17.8 US Gallons RIGHT WING TANK62.5 litres 16.5 US Gallons TOTAL 130 litres34.3 US GallonsFUEL CAPACITY AIRSPEEDS Never Exceed Speed ……….…………….173 KIAS Max Structural Cruising Speed…………..156 KIAS Maneuvering Speed MTOW……………….109 KIAS Initial Climb………………………………………80 KIASBest Angle Climb……………………………….75 KIASBest Rate of Climb……………………………..90 KIASMax Flap Ext 20°……………………..............90 KIASMax Flap Ext 35-45°……………………………70 KIASMax Landing Gear Operation……………….70 KIASMax Landing Gear Extended………………..90 KIASPlanned Cruise TAS………………………….130 KIASFinal Approach Speed………………………..60 KIAS POWERPLANT LIMITATIONSENGINE LIMITS (RPM)Take-off (5 Minutes)………....5800 RPM Max Continuous……………….5500 RPMALTITUDE LIMITSMaximum Operating Altitude………………23 000ftFor Microsoft Flight Simulator Use Only0-12023 Orbx Simulation Systems Pty. Ltd BW 635RG QUICK REFERENCESHEETIssued: 21 Apr 2023Revised: 21 Apr 20230-2PROCEDURESBEFORE STARTING ENGINEPreflight Inspection………………………….COMPLETECrew Briefing………………………………….COMPLETEIgnition…………………………………………………….OFFMaster Switch…………………………………………..OFFBackup Battery …..…………………………….OFF/AUTOLanding Gear Lever………………………………..DOWNCircuit Breakers…………………………………………..IN Canopy………………………………………………CLOSED STARTING ENGINEArea……………………………………………………..CLEARParking Brake……………….HOLD TOE BRAKES ANDENGAGEMaster Switch …..……………….ENGINE START (MID)Fuel Selector…………………………………………….SETFuel Pump………………………………………BOTH (UP)Ignition………………………………………………….BOTHExternal Lights……………………………………..AS REQThrottle ………………………..………..Τ12-1 INCH OPENIgnition………………………………………………….START AFTER START Oil Pressure.…………………………………………RISING Master Switch ……………………………..NORMAL (UP)Radios………………………………………………………SET Altimeter…………………………………………………..SET ATIS and Clearance…………………………..OBTAINEDBEFORE TAXIBrakes/Park Brake ………………………….DISENGAGEFlight Instruments……………………………..CHECKEDCompass…………………………………………CHECKED BEFORE TAKEOFFCanopy/Harnesses………………………………SECURE Flaps…………………………………….……1 STAGE (20°)Trim ..……………………………………SET FOR TAKEOFF Flight Instruments………………………………………SET Engine Instruments………………CHECKED NORMAL Avionics…………………………………………………….SET External Lights………………………………………AS REQ Flight Controls…………..FULL, FREE AND CORRECT Takeoff Safety Brief………………………….DELIVERED TAKEOFFBrakes/Park Brake………………………….DISENGAGEPower…………SMOOTHLY INCREASE TO MAXIMUM45 knots………………………………………………ROTATEAccelerate……….…NOSE ON HORIZON, TO 80 KTSPositive Rate of Climb………………………….GEAR UPLanding Light.……………………………….OFF (DOWN)Flaps ………………………..RETRACT ABOVE 500’ AGLMEMORY ITEMS 2023 Orbx Simulation Systems Pty. Ltd ENGINE RUN UP Parking Brake ……………………………………..ENGAGE Engine Instruments……………………………CHECKED Engine RPM…………………………………SET 2500 RPM Fuel Pump…………………………………………….CYCLE Idle …………………..…..CHECK IDLE 1800 ±100RPM Navigation Equipment …..…………………………….SETFor Microsoft Flight Simulator Use OnlyIssued: 21 Apr 2023Revised: 21 Apr 2023AFTER TAKEOFF Engine Instruments……………………..WITHIN LIMITS Climb Speed…………………………………………90 KIAS Fuel Pump………….MAIN (DOWN ) ABOVE 500’ AGL0-3CRUISEPower….……………………………………….SET 55-75%Airspeed…..……….120-157KTS (<130KTS IN TURB.)DESCENTAltimeter…………………………………………………..SETFuel Selector………………………………FULLEST TANKPower Lever………………….AS REQUIRED FOR RODApproach Brief………………………………PLETE BEFORE LANDINGBrakes……………………………………………………..OFFFuel ………….………………………………QTY CHECKEDFuel Selector………………………………FULLEST TANK Fuel Pump……….………………………………BOTH (UP)LANDINGDOWNWINDAirspeed….………………………………………….90 KIASFlaps….………………………………………STAGE 1 (20°)Airspeed………….………………………………….65 KIASLanding Gear…..…………………….DOWN @ 65 KIASCHECK 3 GREENLanding Light………………………………………ON (UP)BASEFlaps…………………………… STAGE 2 (35°) < 65 KIASFINALAirspeed………….………………………………….60 KIASTouchdown ……………………….MAIN WHEELS FIRSTStick………………………………………………FULL BACK Brakes…………………………………………………..APPLYAFTER LANDING Flaps………………………………………………..RETRACT Landing Lights…………………………………………..OFFFuel Pump….………………………………MAIN (DOWN)SHUTDOWNParking Brake ……………………………………..ENGAGE Throttle……………………………………………………IDLE Switches….………………………….OFF EXCL. MASTERIgnition..…………………………………………………..OFFLights….……………………………………….OFF (DOWN)Master Switch..……………………………..OFF (DOWN)MEMORY ITEMS 2023 Orbx Simulation Systems Pty. Ltd For Microsoft Flight Simulator Use OnlyPROCEDURESIssued: 21 Apr 2023Revised: 21 Apr 2023。

User GuideCopyright and License© 2016 Copyright HP Development Company, L.P.All rights reserved. Reproduction, adaptation, or translation of this material is prohibited without prior written permission of HP, except as allowed under copyright laws.The information contained in this document is subject to change without notice.The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.Edition 1, 2/2016Trademark CreditsAdobe®, Acrobat®, and PostScript® are trademarks of Adobe Systems Incorporated. Intel® Core™ is a trademark of Intel Corporation in the U.S. and other countries.Java™ is a US trademark of Sun Microsystems, Inc.Microsoft®, Windows®, Windows® XP, and Windows Vista® are U.S. registered trademarks of Microsoft Corporation.UNIX® is a registered trademark of The Open Group.ENERGY STAR and the ENERGY STAR mark are registered trademarks owned by the U.S. Environmental Protection Agency.Table of contents1 Product basics (1)Product features (2)Environmental features (3)Accessibility features (3)Product views (4)Front left view (4)Front right view (5)Back view (5)Cartridge door view (6)Power on and off (7)Turn the product on (7)Manage power (7)Turn the product off (8)Use the control panel (9)Control panel buttons (9)Control panel home screen (10)Control panel dashboard (11)Control panel application folders (11)Control panel shortcuts (12)Help features (12)Printer information (13)Help animations (13)Quiet Mode (14)To turn Quiet Mode on or off from the control panel (14)To turn Quiet Mode on or off from the EWS (14)2 Connect the product (15)Connect the product to a computer or a network (16)To connect the product using a USB cable (16)To connect the product to a network (17)Supported network protocols (17)Connect the product using a wired network (17)ENWW iiiConnect the product using a wireless network (wireless models only) (17)To connect the product to a wireless network using the Wireless SetupWizard (18)To connect the product to a wireless network using WPS (18)To connect the product to a wireless network manually (19)Use Wi-Fi Direct to connect a computer or device to the product (20)To turn on Wi-Fi Direct (20)To print from a wireless-capable mobile device (20)To print from a wireless-capable computer (Windows) (20)To print from a wireless-capable computer (OS X) (20)Install HP printer software for a wireless product already on the network (22)Open the printer software (Windows) (22)Manage network settings (22)View or change network settings (22)Set or change the product password (23)Manually configure TCP/IP parameters from the control panel (23)Link speed and duplex settings (23)3 Printer management and services (25)HP Embedded Web Server (26)About the EWS (26)About cookies (26)Open the EWS (27)Features (27)Home tab (27)Scan tab (28)Fax tab (29)Web Services tab (29)Network tab (29)Tools tab (29)Settings tab (30)Web Services (31)What are Web Services? (31)HP ePrint (31)Print apps (31)Set Up Web Services (31)Use Web Services (32)HP ePrint (32)Print apps (33)Remove Web Services (34)HP Web Jetadmin software (34)iv ENWWProduct security features (34)Security statements (35)Firewall (35)Security settings (36)Firmware updates (36)HP Printer Assistant in the printer software (Windows) (36)Open the HP Printer Assistant (36)Features (36)Connected tab (37)Print, Scan & Fax tab (37)Shop tab (37)Help tab (38)Tools tab (38)Estimated Levels tab (38)HP Utility (OS X) (38)AirPrint™ (OS X) (38)4 Paper and print media (39)Understand paper use (40)Supported media sizes (41)Supported paper and print media sizes (41)Supported envelope sizes (42)Supported card and label sizes (42)Supported photo media sizes (42)Supported paper types and tray capacity (43)Tray 1 (multipurpose) on left side of the product (43)Tray 2 (default tray) and Tray 3 (accessory tray) (44)Configure trays (44)Load media (45)Load Tray 1 (45)Load Tray 2 (46)Load optional Tray 3 (48)Load envelopes (49)Load letterhead or preprinted forms (51)Load the automatic document feeder (52)Load the scanner (53)Tips for selecting and using paper (55)5 Cartridges (56)HP PageWide cartridges (57)HP policy on non-HP cartridges (57)ENWW vManage cartridges (57)Store cartridges (58)Print with General Office mode (58)Print when a cartridge is at estimated end of life (58)Check the estimated cartridge levels (58)Order cartridges (59)Recycle cartridges (60)Replace cartridges (60)Tips for working with cartridges (62)6 Print (63)Print from a computer (64)To print from a computer (Windows) (64)To print from a computer (OS X) (65)To set up printing shortcuts (Windows) (66)To set up printing presets (OS X) (66)To adjust or manage colors (67)Choose a preset color theme for a print job (67)Adjust the color options for a print job manually (67)Match colors to your computer screen (68)Control access to color printing (69)Print from the control panel (69)Print using job storage (69)To enable job storage (69)Disable or enable job storage (Windows) (69)Disable or enable job storage (OS X) (69)To apply job storage to one or all print jobs (70)Apply job storage to one or all print jobs (Windows) (70)Apply job storage to one or all print jobs (OS X) (71)To print a job stored on the printer (71)To delete a job stored on the printer (71)Print from a USB device (72)Print with NFC (72)Print with HP ePrint (72)Print off site by sending an email with the HP ePrint app (32)Print from an on-site computer or mobile device (73)Print with AirPrint (OS X) (73)Tips for print success (74)Cartridge tips (74)Paper loading tips (74)vi ENWW7 Copy and scan (76)Copy (77)Copy settings (77)Adjust lightness or darkness for copies (77)Select a paper tray and paper size for copies (77)Reduce or enlarge a copy (77)Load and copy identification cards (78)Copy photos (79)Load and copy mixed-size originals (80)Copy on both sides automatically (80)Cancel a copy job (80)Scan (81)Scan to a USB drive (81)Scan to a computer (81)To set up scan to computer (81)Set up scanning to a computer (Windows) (82)Set up scanning to a computer (OS X) (82)To scan to a computer from the control panel (82)Scan to email (82)To set up scan to email (82)To scan a document or photo to email (83)Scan a document or photo to email from the control panel (83)Scan a document or photo to email from the printer software (83)To change account settings (83)Scan to a network folder (83)To set up scan to a network folder (84)Set up scan to a network folder in the EWS (84)Set up scan to a network folder in the HP Printer Assistant (84)To scan to a network folder (84)Scan to a network folder from the control panel (84)Scan to a network folder from the printer software (84)Scan to SharePoint (85)To set up scan to SharePoint (85)To scan to SharePoint (85)Scan using HP scanning software (85)Scan using other software (86)To scan from a TWAIN-compliant program (86)To scan from a WIA-compliant program (86)ENWW viiGuidelines for scanning documents as editable text (87)To scan a document to editable text (Windows) (88)To scan documents as editable text (OS X) (89)Tips for copy and scan success (90)8 Fax (91)Set up fax (92)Connect fax to a telephone line (92)Configure fax settings (92)To configure fax settings from the control panel (92)To configure fax settings using the HP Digital Fax Setup Wizard (Windows) (93)Set up HP Digital Fax (93)HP Digital Fax requirements (93)To set up HP Digital Fax (94)Set up HP Digital Fax (Windows) (94)Set up HP Digital Fax (OS X) (94)Set up HP Digital Fax in the EWS (94)To modify HP Digital Fax settings (94)Modify HP Digital Fax settings (Windows) (94)Modify HP Digital Fax settings (OS X) (94)Modify HP Digital Fax settings in the EWS (94)To turn off HP Digital Fax (95)Fax programs, systems, and software (95)Supported fax programs (95)Supported phone services - analog (95)Alternate phone services - digital (95)DSL (95)PBX (95)ISDN (96)VoIP (96)Set fax settings (96)Send-fax settings (96)Set pauses or flash hooks (96)Set a dialing prefix (97)Set tone-dialing or pulse-dialing (97)Set autoredial and the time between redials (97)Set the light/dark setting (98)Set the default resolution (98)Use cover-page templates (99)viii ENWWSet fax forwarding (99)Block or unblock fax numbers (100)Set the number of rings-to-answer (100)Set distinctive ring (101)Use autoreduction for incoming faxes (102)Set the fax sounds volume (102)Set stamp-received faxes (102)Send a fax (102)Send a fax from the control panel (103)Use speed dials and group-dial entries (103)Send a standard fax from the computer (103)Send a fax from the software (104)Send a fax using monitor dialing (105)Send a fax using printer memory (105)Receive a fax (106)Receive a fax manually (106)Fax memory (107)Reprint a fax (107)Delete faxes from memory (107)Use the phone book (107)Create and edit individual speed-dial entries (108)Create and edit group-dial entries (108)Delete speed-dial entries (108)Use reports (108)Print fax confirmation reports (109)Print fax error reports (110)Print and view the fax log (110)Clear the fax log (110)Print the details of the last fax transaction (111)Print a Caller ID Report (111)View the Call History (111)9 Solve problems (112)Problem-solving checklist (113)Check that the product power is on (113)Check the control panel for error messages (113)Test print functionality (113)Test copy functionality (114)Test the fax-sending functionality (114)Test the fax-receiving functionality (114)ENWW ixTry sending a print job from a computer (114)Test the plug-and-print USB functionality (114)Factors that affect product performance (114)Information pages (115)Factory-set defaults (116)Cleaning routines (116)Clean the printhead (117)Clean the scanner glass strip and platen (117)Clean the document feeder pick rollers and separation pad (118)Clean the touch screen (118)Jams and paper-feed issues (119)The product does not pick up paper (119)The product picks up multiple sheets of paper (119)Prevent paper jams (119)Clear jams (120)Jam locations (120)Clear jams from the document feeder (121)Clear jams in Tray 1 (multipurpose tray) (122)Clear jams in Tray 2 (122)Clear jams in optional Tray 3 (123)Clear jams in the left door (124)Clear jams in the output bin (125)Clear jams in the duplexer (126)Cartridge issues (127)Refilled or remanufactured cartridges (127)Interpret control panel messages for cartridges (127)Cartridge Depleted (127)Cartridge Low (128)Cartridge Very Low (128)Counterfeit or used [color] cartridge installed (128)Do not use SETUP cartridges (128)Genuine HP cartridge installed (128)Incompatible [color] (129)Incompatible cartridges (129)Install [color] cartridge (129)Non-HP cartridges installed (129)Printer Failure (130)Problem with Print System (130)Problem with Printer Preparation (130)Problem with SETUP cartridges (130)Use SETUP cartridges (130)x ENWWUsed [color] installed (131)Printing issues (131)The product does not print (131)The product prints slowly (132)Plug-and-print USB issues (132)The Memory Device Options menu does not open when you insert the USBaccessory (132)The file does not print from the USB storage device (132)The file that you want to print is not listed in the Memory Device Options menu (133)Improve print quality (133)Check for genuine HP cartridges (133)Use paper that meets HP specifications (133)Use the correct paper type setting in the printer driver (134)Change the paper type and size setting (Windows) (134)Change the paper type and size setting (OS X) (134)Use the printer driver that best meets your printing needs (134)Align the printhead (135)Print a print-quality report (135)Scan issues (135)Fax issues (136)Fax troubleshooting checklist (136)Change error correction and fax speed (137)Set the fax-error-correction mode (137)Change the fax speed (137)Fax logs and reports (137)Print individual fax reports (137)Set the fax error report (138)Fax error messages (138)Communication error. (138)Document feeder door is open. Canceled fax. (139)Fax is busy. Canceled send. (139)Fax is busy. Redial pending. (139)Fax receive error. (140)Fax Send error. (140)Fax storage is full. Canceling the fax receive. (141)Fax storage is full. Canceling the fax send. (141)No dial tone. (141)No fax answer. Canceled send. (142)No fax answer. Redial pending. (142)No fax detected. (142)Solve problems sending faxes (143)ENWW xiAn error message displays on the control panel (143)Document feeder paper jam (143)Scanner error (143)The control panel displays a Ready message with no attempt to send the fax. (143)The control panel displays the message "Receiving Page 1" and does not progressbeyond that message (144)Faxes can be received, but not sent (144)Unable to use fax functions from the control panel (144)Unable to use speed dials (144)Unable to use group dials (144)Receive a recorded error message from the phone company when trying to senda fax (145)Unable to send a fax when a phone is connected to the product (145)Solve problems receiving faxes (145)An error message displays on the control panel (145)The fax does not respond (145)Voice mail is available on the fax line (145)The product is connected to a DSL phone service (146)The product uses a fax over IP or VoIP phone service (146)Sender receives a busy signal (146)A handset is connected to the product (146)A phone line splitter is being used (146)Cannot send or receive a fax on a PBX line (146)Solve general fax problems (146)Faxes are sending slowly (146)Fax quality is poor (147)Fax cuts off or prints on two pages (147)Connectivity issues (147)Solve USB direct-connect problems (147)Solve network problems (148)Poor physical connection (148)The computer is using the incorrect IP address for the product (148)The computer is unable to communicate with the product (148)The product is using incorrect link and duplex settings for the network (149)New software programs might be causing compatibility problems (149)The computer or workstation might be set up incorrectly (149)The product is disabled, or other network settings are incorrect (149)Wireless network issues (149)Wireless connectivity checklist (149)The product does not print, and the computer has a third-party firewall installed (150)The wireless connection does not work after moving the wireless router or product (150)xii ENWWCannot connect more computers to the wireless product (150)The wireless product loses communication when connected to a VPN (151)The network does not appear in the wireless networks list (151)The wireless network is not functioning (151)Product software issues (Windows) (151)Product software issues (OS X) (153)The printer driver is not listed in the Print & Scan list (153)The product name does not appear in the product list in the Print & Scan list (153)The printer driver does not automatically set up the selected product in the Print & Scan list (153)A print job was not sent to the product that you wanted (153)When connected with a USB cable, the product does not appear in the Print & Scan list afterthe driver is selected. (153)You are using a generic printer driver when using a USB connection (154)10 Service and support (155)Customer support (156)HP limited warranty statement (157)UK, Ireland, and Malta (158)Austria, Belgium, Germany, and Luxemburg (158)Belgium, France, and Luxemburg (159)Italy (160)Spain (160)Denmark (161)Norway (161)Sweden (161)Portugal (162)Greece and Cyprus (162)Hungary (162)Czech Republic (163)Slovakia (163)Poland (163)Bulgaria (164)Romania (164)Belgium and the Netherlands (164)Finland (165)Slovenia (165)Croatia (165)Latvia (165)Lithuania (166)Estonia (166)Russia (166)ENWW xiiiAppendix A Technical information (167)Product specifications (168)Print specifications (168)Physical specifications (168)Power consumption and electrical specifications (168)Acoustic emission specifications (168)Environmental specifications (168)Environmental product stewardship program (170)Protecting the environment (171)Ozone production (171)Power consumption (171)European Union Commission Regulation 1275/2008 (171)Paper (171)HP PageWide printing supplies (171)Plastics (171)Electronic hardware recycling (172)Material restrictions (172)General battery information (172)Battery disposal in Taiwan (172)California Perchlorate Material Notice (172)EU Battery Directive (172)Battery notice for Brazil (173)Chemical substances (173)EPEAT (173)Disposal of waste equipment by users (173)Toxic and hazardous substance table (China) (174)Restriction on hazardous substances statement (Turkey) (174)Restriction on hazardous substances statement (Ukraine) (174)Restriction of hazardous substance statement (India) (174)China energy label for printer, fax, and copier (175)China SEPA Eco Label user information (175)Regulatory information (176)Regulatory notices (176)Regulatory model identification number (176)FCC statement (176)VCCI statement (Japan) (177)Power cord instructions (177)Power cord statement (Japan) (177)EMC statement (Korea) (177)Visual display workplaces statement for Germany (177)European Union Regulatory Notice (178)xiv ENWWEuropean Union Regulatory Notice (178)Wireless models only (178)Models with fax capability only (178)Additional statements for telecom (fax) products (179)New Zealand telecom statements (179)Additional FCC statement for telecom products (US) (179)Industry Canada CS-03 requirements (180)Notice to users of the Canadian telephone network (181)Australia wired fax statement (181)Notice to users of the German telephone network (181)Additional statements for wireless products (182)Exposure to radio frequency radiation (182)Notice to users in Brazil (182)Canadian statements (182)Japan statement (183)Notice to users in Korea (183)Taiwan statement (183)Mexico statement (183)Index (184)ENWW xvxvi ENWW1Product basics●Product features●Product views●Power on and off●Use the control panel●Quiet ModeENWW1Product featuresPageWide Pro MFP 477dnD3Q19A, D3Q19B, D3Q19C,D3Q19D Tray capacity (75 GSM or 20–lb Bond paper)●Tray 1: 50 sheets ●Tray 2: 500 sheets ●Optional Tray 3: 500 sheets ●Automatic Document Feeder(ADF): 50 sheets●Standard output bin: 300sheetsPrint ●Simplex speeds up to 40 pagesper minute (ppm) for both color and black with Professional quality●Duplex speeds up to 21 ppmfor both color and black with Professional quality●Up to 55 ppm in General Officemode●Walkup Plug-and-Print USBDevice port●Walkup printing of MS Officedocuments Copy ●Simplex speeds up to 40 ppm in black and color ●Single-pass, two-sided copying for speeds up to 26 ppm in black and color ●50-sheet ADF supports page sizes up to 356 mm (14.0 in) in length and 216 mm (8.5 in) in width Scan●Duplex speeds up to 26 ppm for both color and black ●Scan to walkup USB device, email address, network folder, or SharePoint site ●Glass supports page sizes up to 356 mm (14.0 in) in length and up to 216 mm (8.5 in) in width ●HP software enables scanning a document to a file that can be edited ●Compatible with TWAIN, WIA, and WS-Scan programs Fax●Fax to email address ornetwork folder●Fax from walkup control panelor from program on connected computer●Fax archive, fax log, junk-faxblocking, non-volatile fax memory, fax redirect featureConnectivity ●802.3 LAN (10/100) Ethernet port ●Host USB Type A and Type B ports (back)●USB 2.0 Device port (front)PageWide Pro MFP 477dw D3Q20A, D3Q20B, D3Q20C, D3Q20D Has the same features as the PageWide Pro MFP 477dn, and includes the following:●Embedded wireless capability ●802.11n 5GHz dual bandsupport●HP ePrint—send documents tothe product email address for printing●HP Wireless Direct support ●NFC-enabled (Near FieldCommunications); walkup printing from smart phones and tablets●Scan to smart phone 2Chapter 1 Product basics ENWWEnvironmental featuresFeature Environmental benefitDuplex printing Automatic duplex printing is available on all models of HP PageWide Pro MFP477dn/dw series. Duplex printing saves the environment and saves you money.Print multiple pages per sheet Save paper by printing two or more pages of a document side-by-side on onesheet of paper. Access this feature through the printer driver.Copies multiple pages per sheet Save paper by copying two pages of an original document side-by-side on onesheet of paper.Recycling Reduce waste by using recycled paper.Recycle cartridges by using the HP Planet Partners return process.Energy savings Sleep modes and timer options enable this product to quickly go into reducedpower states when not printing, thus saving energy. Accessibility featuresThe product includes several features that aid users with limited vision, hearing, dexterity or strength.●Online user guide that is compatible with text screen-readers.●Cartridges can be installed and removed using one hand.●All doors and covers can be opened using one hand.ENWW Product features3Product views●Front left view●Front right view●Back view●Cartridge door viewFront left viewLabel Description1USB device connection port2Cartridge door3Tray 1 extension4Tray 15Power button6Tray 2–main paper tray7Control panel8Scanner glass4Chapter 1 Product basics ENWWFront right viewLabel Description1Automatic document feeder (ADF) cover2Main output door3ADF paper guides4ADF loading area5ADF output bin6ADF output bin stop7Main output bin stop8Main output binBack viewLabel Description1Ethernet connection port2Fax connection ports3USB Type A and USB Type B ports4Power cord connectionENWW Product views5Label Description5Left door6DuplexerCartridge door viewLabel Description1Cartridge slots2Product serial number and product number3Cartridge part numbers6Chapter 1 Product basics ENWWPower on and offNOTICE:To prevent damage to the product, use only the power cord that is provided with the product.●Turn the product on●Manage power●Turn the product offTurn the product on1.Connect the power cord that is provided with the product to the connection port on the back of theproduct.2.Connect the power cord to a wall outlet with an adequate voltage rating.NOTE:Make sure that your power source is adequate for the product voltage rating. The product useseither 100-240 Vac or 200-240 Vac and 50/60 Hz.3.Press and release the power button on the front of the product.Manage powerHP PageWide Pro MFP 477dn/dw series printers include power-management features that can help reducepower consumption and save energy.●Sleep Mode puts the product in a reduced power-consumption state if it has been idle for a specificlength of time. You can set the length of time before the product enters Sleep Mode from the controlpanel.●Schedule On/Off enables you to turn the product on or off automatically at days and time that you setfrom the control panel. For example, you can set the product to turn off at 6 p.m. on Monday throughFriday.Set the Sleep Mode time1.Open the control panel dashboard (swipe the dashboard tab at the top of any screen downward, ortouch the dashboard area on the home screen).2.On the control panel dashboard, touch .ENWW Power on and off73.Touch Power Management, and then touch Sleep Mode.4.Select one of the time-interval options.The product switches into a reduced power-consumption state when it has been idle for the amount of timethat you select.Schedule the product to turn on or off1.Open the control panel dashboard (swipe the dashboard tab at the top of any screen downward, ortouch the dashboard area on the home screen).2.On the control panel dashboard, touch .3.Touch Power Management, and then touch Schedule Printer On/Off.4.Turn the Schedule On or Schedule Off option on.5.Select the Schedule On or Schedule Off options at the bottom of the screen, and then select the day andtime that you want to schedule.The product switches on or off at the time you select on the day you select.NOTE:The product cannot receive faxes when it is turned off. Faxes sent during a scheduled off interval willprint when the product is turned on.Turn the product offNOTICE:Do not turn off the product if a cartridge is missing. Damage to the product can result.▲Press and release the power button on the front of the product to turn off your HP PageWide Pro MFP 477dn/dw series printer.A warning message appears on the control panel if you attempt to turn the product off when one ormore cartridges are missing.NOTICE:To prevent print-quality problems, turn off the product by using the power button on the frontonly. Do not unplug the product, turn off the powerstrip, or use any other method.8Chapter 1 Product basics ENWWUse the control panel●Control panel buttons●Control panel home screen●Control panel dashboard●Control panel application folders●Control panel shortcuts●Help featuresNOTE:The small text on the control panel is not designed for prolonged viewing.Control panel buttonsButtons and indicator lights on the control panel of HP PageWide Pro MFP 477dn/dw series printers appear litwhen their function is available, and are darkened if their function is not available.1Home button.Touch to view the control panel home screen.2Wireless network indicator.Solid blue when the product is connected to a wireless network. Blinks when the product is searching for awireless connection. Off when the product is connected to a wired network or by a USB cable.3NFC (Near Field Communications) indicator.The product can be enabled for walkup printing from tablets and smart phones.4Back or Cancel button.Touch to return to the previous screen, or to cancel the current process.5Help button.Touch to view the Help menu options.ENWW Use the control panel9。

锐起游戏共享精灵XP 使用手册〔V 1.5〕Copyright © 2005-2006 Shanghai RichTech Co.,Ltd.目录最终用户许可协议 (4)《锐起游戏共享精灵XP》包装盒内物品清单 (7)系统运行平台 (7)软硬件需求 (7)第一章软件简介 (9)1.1 软件特点 (9)1. 负载力强劲，运行迅速、流畅 (9)2. 超级稳定，百分百兼容各类游戏 (9)3. 安装、更新游戏快速、简单 (9)4. 无限扩大硬盘容量，无限增加游戏数量 (9)5. 系统维护方便、高效 (10)6. 延长硬盘寿命，增加保值性 (10)7. 超强安全性 (10)第二章安装和注册 (11)2.1 安装前的准备 (11)2.1.1 准备服务器 (11)2.1.2 准备客户机 (11)2.1.3 确认网络配置 (11)2.2 软件安装 (11)2.2.1 安装服务端 (11)2.2.2 安装客户端 (12)2.3 软件注册 (12)第三章服务端使用说明 (13)3.1 运行服务端管理程序 (13)3.2 设置网络硬盘 (13)3.2.1 新增网络硬盘 (14)3.2.2 修改网络硬盘 (15)3.2.3 删除网络硬盘 (15)3.3 服务器选项 (15)3.4 客户端选项 (16)3.4.1 自动复原设置 (17)3.4.2 临时数据设置 (17)3.5 在服务端编辑游戏文件 (19)3.5.1 装载 (19)3.5.2 卸载 (20)3.6 完成设置 (20)第四章客户端使用说明 (21)4.1 运行客户端管理程序 (21)4.2 格式化网络硬盘 (21)4.3 设置服务器地址 (22)4.4 “超级用户”和“普通用户”的切换 (22)4.4.1 普通用户至超级用户 (22)4.4.2 超级用户至普通用户 (23)4.5 安装、更新游戏和软件 (23)4.6 注册表同步与补丁 (24)4.6.1 注册表同步 (24)4.6.2 注册表补丁 (25)第五章常见问题 (26)最终用户许可协议本《最终用户许可协议》（以下称《协议》）是您（个人或单一机构团体）与上海锐起信息技术有限公司（以下称“锐起公司”）之间关于上述锐起公司软件产品[锐起游戏共享精灵XP]（以下称[共享精灵软件]）的法律协议。

伞饭原创帖转发：优秀免费软件推荐–【人人分享首先说明一下，本文旨在交流软件使用的心得和看法，不提供下载地址，请自行搜索下载。

建议到官网下载，或者到可信赖的下载站，如CNET、Softpedia、天空、华军、霏凡、多特等下载。

转贴请注明伞饭stjzcm原创。

相关阅读：CNET编辑推荐软件介绍（文内有相关软件下载地址）这个世界上有大量精品的免费软件，其中许多软件的品质甚至超过了同类的某些商业软件，因此我一直提倡大家使用免费软件，下面我就把我自己使用/试用过的一些优秀免费软件推荐给大家，希望能给大家一些帮助。

一、系统工具类1.快速启动工具：个人选择：FARR（Find and Run Robot）推荐：Launchy！备选：Executor、FARR、AltRun、Win+R或许很多朋友对于快速启动工具还不是很了解，其实快速启动工具，顾名思义，就是快速启动常用程序文档的工具。

快速启动工具对于安装了许多软件的朋友来说是非常方便实用的，因为你可以随时呼出快速启动工具，简单地键入几个字母，然后快速地打开你想要的程序。

实际上，快速启动工具有两类，一类是我在这里介绍的工具，以键盘操作为主，适合于喜欢键盘操作、收支经常不离开键盘的朋友；另一类则是以鼠标操作为主，例如音速启动VStart、RocketDock和StrokeIt!（Windows鼠标手势软件），由于我认为键盘操作更为简便快捷，所以我对后者了解较少，因此就不作介绍了。

在我所推荐的几款软件中，Launchy!当属第一选择，它是一款免费开源的工具，界面美观，简单易用，不需要复杂的设置，对于初次使用类似工具的人非常容易上手。

当然，易用性与可定制性之间往往是矛盾的，相对于易用的Launchy!，备选的Executor、FARR和国产精品AltRun更强调可定制性，尤其是FARR，其选项设置非常复杂，第一眼看到相信可能会使一些人有头晕目眩的感觉，但是强大的可定制性可以让搜索更准确，更具有针对性。

STARWIND新手完美教程STARWIND新手完美教程，看了就懂，懂了就能做首先这个STARWIND的版本目前是3.1.4了，新版本支持WEB功能，由于高手不去破解，使得我们只能用2.4.6这个版本了，网上到处都有下的!3.1.4官方下载：http://www.rocket /downloads/starwind.exe1。

安装路径：默认在C:\Program Files\Rocket Di vision Software\StarWind，我建议大家改在其他盘，假定你的盘是200G空间，那么我建议如下划分：C盘5G，D盘10G（临时文件），E盘170G（虚拟盘），F盘15G（STA RWIND目录，IBV目录，系统GHOST备份，驱动备份）。

为什么建议把STARWIND放其他盘？因为啊，如故出现2台以上的机器登陆同一个IBV，那么在其目录就会有MDMP 文件出现，每个这个文件都TMD很大，你想，这个会很影响系统运行速度的，如果产生这些文件就要及时删除掉！2。

为了便于学习，我们假定按默认安装好STARWIND，下边首先建立：IMG文件，就是镜象盘。

也可以直接将整个磁盘搞成镜象盘，但是不推荐；这里将E盘的170G划分160G 做为虚拟盘。

mksparse.exe 命令是用来创建空白虚拟磁盘映象文件在运行里输入cmdcd C:\Program Files\Rocket Division Software\StarWindmksparse.exe -o e:\file.img 160G以上就在e:盘创建了一个空白的虚拟磁盘映象文件,大小是160G，为了方便制作教程，我做的是1G，不要搞错了，另外大小在后面不可以直接增加，如从160G增加到200G，只能重新做一个，注意了！看图：图1进入STARWIND目录，并运行建立空白磁盘命令图2：命令成功执行后，在E盘上建立的File.img文件大小1G（如果建立160G大概要1-2个小时3。