路特仕导航仪说明书

阳光论坛最详细的导航安装作业！吐血奉献！上次发了提车作业，向各位车友介绍了我自己安装的路特仕DVD导航一体机及植入善领DSA软件，这份作业还被版主置顶了一周，对版主的厚爱在此表示感谢！原帖地址：/bbs/thread-c-64-10926480-1.html在回帖中，很多车友对如何安装导航主机及植入善领DSA软件很感兴趣，不少人跟帖询问。

由于本人时间有限，没能一一回复，在此表示歉意。

现在总算找时间整理好了图片，特发此导航安装贴，供感兴趣的车友参考，与车友们分享经验，欢迎大伙批评指正！如有对安装导航过程有不明白的车友，请跟帖提出，我会尽量解答！谨以此贴，献给具有爱车之心和折腾精神及动手能力的广大阳光车友们！由于本帖篇幅过长，本人单独开贴介绍善领DSA软件的安装植入方法，本帖不再赘述。

感兴趣的TX请点击这个链接：/bbs/thread-c-64-11220655-1.html#p id209805105声明：由于本人拍摄照片有限，为了更好地说明整个安装过程，本帖部分照片来源于淘宝网和汽车之家网站，此类照片版权属原创作者所有。

借用照片目的仅在于交流学习，不用于商业用途。

若原创作者有异议，请联系本人，本人将在第一时间将相关照片删除！闲话少说，切入主题！一、需要的工具：a,一字和十字螺丝刀各一把，b,万用表一个(找倒车灯线用，看完本贴你也可以不用它)， c,接线剪一把(也可用普通剪刀)，d,透明胶和电工胶布各一卷。

二、主机及配件：↑图1、路特仕的导航DVD一体机，型号好像是2907D，淘宝上花1500大洋买来的(含摄像头)，今天上网一看又降价了上图是和原车拆下来的CD机对比↑图2、背面对比↑图3、配件清单。

请注意这根专用转接线，这是店家配给的。

必须有这个线束才能和原车接头直接对插，实现无损安装。

中间这根线束的功能被专用转接线束取代了，因此用不上。

↑图4、专用转接线束的特写。

上图来自淘宝网。

三、拆中控面板↑图5、首先用透明胶布将一字螺丝刀包好，这样撬面板的时候就不会留下划痕了↑图6、从篮圈位置将螺丝刀插入，稍微用力，小心将面板撬起，先撬哪个位置都可以的。

GPS12使用手册首先感谢您选择了GARMIN GPS12，这是一款使用简单，携带方便的GPS导航仪。

其致力于长时间提供优质的导航服务和良好的人机互动。

为了更好地使用本产品，请仔细阅读使用说明书！为了方便理解，本说明书分为四个部分：简介部分：对操作手册一些专业术语简要概述；入门部分：介绍了本产品的基本特征，简述了利用GPS12快速定位的方法；参考部分：说明了GPS12的先进功能及操作细节；附录部分：包含初始化说明和其他多个操作，如地图基准，时间偏移，索引。

在开始使用GARMIN GPS12之前，请仔细检查以下的几个地方：如有缺失任何部件，请立即与经销商联络。

标准配件：GARMIN GPS12；使用说明书；腕带；快速使用手册。

经销商应提供的配件有：GARMIN GPS12包；旋转接头；外接天线；电源/数据线。

我们希望本产品能尽可能满足您的导航需求，我们将尽我们最大的努力让其成为一款优秀的户外设备。

IGPS系统是美国开发的一套系统，其负责该系统的维护与准确性。

该系统如有变化将会影响所有GPS设备的准确性及使用性能。

虽然GPS12是一种精密电子导航系统（导航设施），但是如果误操作或者误解其用途，那么该系统将不再安全。

个人使用GPS12一些要求：为了减少不安全操作的风险，应仔细阅读和理解本操作手册的各方面并利用模拟系统进行操作练习。

在实际使用时，应结合其他导航设备包括从其他助航设备，目视瞄准，地图等信息仔细比较GPS12的信息显示。

出于安全考虑，须在继续航行之前解决任何误差。

注意：此装置符合FCC的第15部分对家庭或办公室使用的B类数字设备的限额要求。

它已经过测试，符合所有必要的FCC标准(FCC:全称美国联邦通讯委员会Federal Communications Commission)。

本产品通过无线电进行通信，如不按其操作规程使用，则会对信号的准确性有很大的影响。

当然，在按照规则合理使用设备时，也不能排除其他设备对本产品的干扰，当遇到干扰时，可以通过重启来恢复使用，当然，远离干扰源或连接该设备到其他的系统也是避免干扰的有效措施。

手册VIAVIATB-7300NG航空电子导航设备台式测试仪ATB-7300NG导航测试仪基于新的 VIAVI AXIe航空电子测试平台 (ATB)。

ATB平台是一款功能强大的前沿设计，专为从 OEM到维修厂的最终用户量身定做，可用于航空电子产品生命周期的所有阶段：产品开发、设计验证和确认、认证、制造、返修，以及服务/校准。

标准功能甚高频信号发生器 - 提供对调制频率、调制深度（最多 3 个信号源）、选呼 (SELCAL) 音调、频率和音调序列的控制ILS 航向道 (LOC) 信号发生器 - 提供对 90Hz 和 150Hz 音调频率、调制深度、左/右 DDM 和包括莫尔斯电码在内的识别码 (IDENT) 设置值的控制ILS 下滑道 (G/S) 信号发生器 - 提供对 90Hz 和 150Hz 音调频率、调制深度、上/下 DDM 的控制甚高频全向信标 (VOR) 信号发生器 - 提供对 30Hz 可变/基准和 9960Hz 音调频率、调制深度、9960Hz 频偏、VOR 方位、向/背台和识别码 (IDENT)设置值的控制自动定向机 (ADF) 信号发生器 - 提供对调制频率、调制深度和识别码 (IDENT) 设置值的控制指点信标 (Marker Beacon) 信号发生器 - 可选择外指点、中指点和内指点信标音调，而且可以控制音调频率、调制深度和识别码 (IDENT) 设置用户界面y基本图形用户界面 (GUI) 允许访问各项测试功能y ATB 提供以太网远程控制接口y针对以下传统产品的命令集提供兼容性：-NAV-2000R-Collins479S-6A-ATB-7300• 使用客户提供的显示器显示 ATB-7300NG。

联系我们 +13165224981 avcomm.sales@要联系离您最近的 VIAVI 办事处，请访问 /contact。

© 2022 VIAVI Solutions Inc.本文档中的产品规格和描述如有更改，恕不另行通知。

jkJCFG (6x)D (2x)IHABE• Read and understand this information, file it in your maintenance records. Fa -miliarization with the Stryker navigation system prior to its use is important. Refer to the instructions for use of the naviga-tion system.• The instrument should only be used inaccordance with the instructions for usecontained in this manual.• Prior to each use, inspect the instrument.Breakage of glass, loose components,fogged or wet glass on the inside of theLEDs may lead to compromised function -ality of the instrument. Do not use if anyof these conditions exist. Contact yourStryker Navigation sales representativein such case.• Prior to each use, the instruments should be operated with the Stryker navigation system to ensure they are functioning properly.• The healthcare provider performing any procedure is responsible for determin -ing the appropriateness of the instru-ment and the specific technique for eachpatient. Stryker, as a manufacturer, does not recommend a specific surgical proce -dure.• Performing procedures with instruments other than those specified in these in -structions or outside of their intended use will compromise the navigation accuracy.• U se only Stryker approved components and accessories, unless otherwise speci -fied. Other accessories may result inincreased electromagnetic emissions ordecreased electromagnetic immunity ofthe system. Do not modify any compo-nent or accessory. Failure to comply mayresult in patient and/or health care staffinjury.• In case of the presence of EM distur-bance, degradation of the performanceof this equipment could result.User/Patient Safety WARNINGIntended Use The Instrument Tracker is intended for usewith the Stryker navigation system - Hip Modules.The Instrument Tracker is used for instru-ment tracking and is intended to be mount -ed to multiple surgical instruments having been modified for navigation. Moreover, the Instrument Tracker may be used to control the navigation system software and, in addition, to validate pointers.Contraindications None er Group Healthcare professionals (surgeon/resi -dent, nurse/professional caregiver) edu -cated in computer-assisted surgery and thoroughly familiar with the instructions for use and with the operation of this product. To request an additional in-service instruc -tion, contact Stryker.NOTE:The following conventions are used in this document:The signal word WARNING highlights a safety-related issue. Comply with this information to prevent patient and medical staff injury.The signal word CAUTION highlights a product reliability issue. Comply with this information to prevent product damage.service is required, contact your Stryker Navigation sales representative.• Prior to proceeding, verify that the Instru-ment Tracker is firmly attached to the instrument as instructed. If the tracker moves relative to the instrument, naviga -tion is inaccurate.• Navigated instruments contain multiple infrared LEDs, a transmit LED and a receiver. All of the LEDs must be in view of the camera for the navigation system to function properly.CAUTION• Do not apply any physical impact to the navigated instrument, such as with a mallet or a similar tool. Any impact will cause product damage or operational failure due to battery movement.• To avoid malfunction, do not scratch or damage the LEDs in any way.• For increasing the longevity of the Instru -ment Tracker, we recommend that you remove the Instrument Tracker from the instrument if you have to apply heavy impacts on the instrument, for example when fixing a cup.NOTE:The user and/or patient should report any serious product-related incident to both the manufacturer and the national competent authority where the user and/or patient is established.• Use of this equipment adjacent to or stacked with other equipment should be avoided because it could result inimproper operation. If such use is neces-sary, this equipment and the other equip -ment should be observed to verify that they are operating normally.• Portable RF communication equipment(including peripherals such as antenna cables and external antennas) should be used not closer than 30 cm (or 12 inch -es) to the Instrument Tracker. Otherwise, degradation of the performance of this equipment could result.• Use Instrument BatteryREF 6000-006-000 only. Load a new battery before first and every use as instructed in this manual.• During surgery, always keep a sterile re -placement Instrument Battery available.• R emove the Instrument Battery as in-structed in this manual before cleaning or sterilizing the navigated instrument.• Do not sterilize Instrument Batteries; they are supplied sterile and must not be resterilized.• Clean and sterilize the instrument before first and every use. Refer to the Guide for Cleaning, Disinfection and Steam-Based Sterilization (TD6000005750).• This equipment is not suitable for use inthe presence of flammable anestheticmixtures with air, oxygen or nitrous ox-ide.• During surgery, if fluids such as saline solutions enter the battery holder, the electronics can fail and communication -with the system will cease.• During surgery, keep the LEDs clean andout of contact with liquids at all times.Failure to comply may compromise navi -gation accuracy.• E xcessive infrared radiation from exter-nal sources can influence localization ofthe instrument by the navigation system.Refer to the Navigation System CameraInstructions for Use .• Do not service the instrument. It does notcontain any parts the user can service. IfFunction and FeaturesRefer to figure j on page 2.SELECT Button (A)• Press to initialize the instrument.• After initialization, press to select soft-ware interface functions displayed on the navigation system monitor.• After initialization, turn clockwise to move forward through the software or highlight an item below, in a list of menu select-able items.• After initialization, turn counterclockwise to move backward through the software or highlight an item above, in a list of menu selectable items.Release Button (B) and Tracker Interface (C)• These features allow the tracker to be secured to and detached from the navi-gated instrument.Validation Disks (D)• Used as reference points, touch the disk cross-hairs with the instrument tip to vali-date the instrument.Green Status Light (E)• During instrument initialization, the light flashes rapidly.• During normal operation, the light flashes every few seconds.• The light illuminates continuously, if in-strument power is low.Battery Holder with Sleeve (F)Infrared LEDs (Light Emitting Diodes) (G), Transmit LED (H) and Receiver (I)• Emit and receive infrared light signals that are used to provide a wireless com-munication link to the navigation sys-tem's camera.Instructions1 Instrument BatteryWARNINGOnly use a new, sterile Instrument Battery REF 6000-006-000.1.1 Remove the battery from the sterilepackage.1.2 Open the battery housing by slidingdown the battery sleeve.1.3 Press the negative end of the batteryinto the battery holder and against thespring.1.4 Close the battery holder by sliding thesleeve back in position.1.5 Observe the green status lightilluminate for three seconds to indicate that the device is functioning properly.1.6 To remove the battery, gently pressdown on the positive end of thebattery and pull it away from thebattery holder.NOTE:After changing the battery during opera-tion, press the SELECT button until the instrument is initialized again.2 Initialize InstrumentNOTE:Ensure the line of sight between the in-strument and the camera is not blocked, and that the instrument's infrared LEDs, transmit LED and receiver directly face the camera.4.2 Proceed with instrument validation.With pointer and Instrument Tracker aligned with the camera, touch theinstrument's validation point with thepointer’s tip and press the SELECT button.5Detach Instrument TrackerFor instrument detachment, press the release button and slide the Instrument Tracker from the instrument interface. The release button will remain pressed untilthe tracker will be fixed on the instrumentinterface again.Cleaning and Inspection InstructionsCleaning Group IV.Refer to the Guide for Cleaning, Disin-fection and Steam-Based Sterilization(TD6000005750) for cleaning safety andcaution notes, cleaning equipment and de-tailed cleaning and inspection instructions intended for instruments with electronics.Sterilization InstructionsRefer to the Guide for Cleaning, Disin-fection and Steam-Based Sterilization (TD6000005750) for detailed sterilizationinstructions and caution notes.2.1 Wait for the navigation system to prompt for the initialization before initializing the instrument.2.2 Once in the system setup mode, and prompted by the software interface, press the SELECT button until the device is initialized.2.3 Observe the green status light flashrapidly during initialization.2.4 Once initialized, observe the green status light flash slowly and a system message appear on the monitor indicating instrument recognition.3 Mount Instrument Tracker WARNING Ensure the tracker snaps into position. The tracker must be rigidly fixated on the in -strument during surgery. Failure to comply may lead to navigation inaccuracy.3.1 Align tracker and instrument as shown in figure k . 3.2 Slide quickly the Instrument Tracker over the instrument interface (J) of the instrument intended for navigation until the tracker snaps into position.The right position is reached if therelease button jumps ahead.3.3 To verify that the tracker is firmlyattached, try to move and rotate the tracker. The tracker must not move in any direction.4 Validate InstrumentPrior to instrument validation, the pointer must be validated. Refer to step 4.1. Ifpointer validation is already performed,proceed to step 4.2.4.1 Precisely place the pointer’s tipinto the center of the validation diskplaced on the left or right side ofthe Instrument Tracker. Refer to theinstructions for use supplied withthe pointers REF 6007-011-000,REF 6003-012-000, orREF 6007-012-000.DisposalProducts and batteries that have been in contact with material of human origin may be infectious. Safely remove the batteries from the device with the necessary pre-cautionary measures. Contact your local distributor for disposal information.To comply with European Directive2012/19/EU on Waste Electrical and Elec-tronic Equipment (WEEE), products and batteries must be collected separately for recycling. Do not dispose of as unsorted municipal waste. Ensure infected products are decontaminated prior to recycling. For Use WithWARNINGUse only Stryker-approved devices unless otherwise specified.For information related to compatible soft-ware applications, refer to the user manual of the software application.Technical Specifications* REF 6007-008-000 Instrument Tracker Size:125.85 mm [4.95 in] height,67.0 mm [2.63 in] width,115.0 mm [4.25 in] length Weight1: 420 g [14.81 oz.]1Values without Instrument Battery.Material:Aluminum (housing); PPSU (battery hous-ing); stainless steel (interface)Power supply:3 V , internally powered (lithium battery CR 2)Enclosure protection:IPX0 Ordinary EquipmentApprovals:CSA International cCSAusEN / IEC 60601-1EN / IEC 60601-1-2ANSI/AAMI ES60601–1CAN/CSA-C22.2 No. 60601-1 Operation:Storage and Transportation:10°C30°C25%85%70kPa106kPa -20°C40°C10%75%50kPa106kPa* Specifications listed are approximate and may vary slightly from unit to unit.Troubleshooting Guidelines Navigated instrument fails to power upwhen battery is installed:• Battery is installed improperly. Reinstall battery.• Battery power is low. Replace battery.• Navigated instrument is damaged. Re-turn navigated instrument for service.Navigated instrument cannot be initial-ized:• Battery is installed improperly. Reinstall battery.• Battery power is low. Replace battery.• Transmit LED or receiver are damaged. Return navigated instrument for service.• SELECT button is stiff or defective. Re-turn navigated instrument for service.Range of movement is limited:• One or more of the LEDs are dirty or do not function properly. Clean surface of the LEDs. If cleaning does not improve the function, return the instrument for service.Green status light illuminates continuously:• Battery power is low. Replace battery.Communication with the system fails after Navigation software is restarted: • Remove and reinsert battery. Re-initialize instrument.Line of sight between navigated instrument and camera is interrupted: • Navigated instrument is not visible. Re-move obstruction and system will resume communication.Tracker cannot be mounted to instrument:• Instrument interface or tracker interface is damaged. Return for service.• Tracker's orientation on instrument is not correct. Verify and correct orientation if necessary. See figure k for correct ori-entation.• Release button is not in pressed posi-tion. Press release button until it remains pressed and mount the tracker on instru-ment again.Definition of SymbolsThe following table defines the symbols used in this document, on the product and on the product label.EN ISO 7010 Graphical symbols – Safety colors and safety signs – Registered safety signsSymbol/NumberName: DefinitionW001General warning sign: To signify a general warning.M002Refer to instruction manual/booklet: To signify that the instruction manual/booklet must be read.EN ISO 15223-1 Medical devices – Symbols to be used with medical device labels, labelling and information to be supplied – Part 1: General requirementsSymbol/NumberName: Definition5.1.1Manufacturer: Indicates the medical device manufacturer as defined in the European Union harmonization legislation.5.1.3Date of manufacture: Indicates the date when the medical device was manufactured.LOT 5.1.5Batch code: Indicates the manufacturer's batch code so that the batch or lot can be identified.REF 5.1.6Catalog number: Indicates the manufacturer’s catalog number so that the medical device can be identified.SN 5.1.7Serial number: Indicates the manufacturer’s serial number so that a specific medical device can be identified.NON STERILE5.2.7Non-sterile: Indicates a medical device that has not been subjected to a sterilization process.5.3.7Temperature limit: Indicates the temperature limits to which the medi-cal device can be safely exposed.5.3.8Humidity limitation: Indicates the range of humidity to which the medi-cal device can be safely exposed.<Stryker Leibinger GmbH & Co. KG Bötzinger Straße 4179111 Freiburg (Germany)t: +49 761 4512 0 (Germany)t: +1 269 323 7700 (USA)T r a n s l a t e d E q u i v a l e n t : T D 6007008713U.S. Patents: /patents Stryker Corporation or its divisions or other affiliated entities own, use or have applied for the following trademarks or service marks: Leibinger, Stryker. All other trade -marks are trademarks of their respective owners or holders.Copyright © 2019 Stryker。

车载导航仪的安装说明车载导航仪安装说明一、准备工作在开始安装车载导航仪之前，请确保您已经阅读了用户手册，并准备好以下工具和材料：1. 车载导航仪主机2. 支架和吸盘3. 电源线4. 车辆电源适配器5. 电池（如果需要）6. 电缆夹7. 螺丝刀二、安装导航仪主机1. 将支架固定在车辆仪表盘上，确保支架牢固而稳定。

2. 将导航仪主机放置在支架上，确保其与车辆仪表盘平齐。

3. 使用螺丝刀将导航仪主机与支架固定，确保主机不会晃动或掉落。

三、连接电源线1. 将一端插入导航仪主机的电源接口。

2. 另一端插入车辆电源适配器的电源口。

3. 确保电源线连接牢固，并没有松动。

四、安装导航仪电源1. 根据车辆的电源类型（12V或24V），选择合适的电池。

2. 使用电缆夹将电池连接到导航仪主机的电池接口上。

3. 注意电池极性的正确连接，以免发生短路或其他安全问题。

五、调试导航仪1. 开始导航前，请确保车辆已经启动，并处于安全停车的状态。

2. 打开导航仪主机的电源按钮，等待片刻直到主机完全启动。

3. 根据用户手册中的操作指南，配置导航设置、GPS定位、语言偏好等选项。

4. 测试导航功能，选择目的地并观察导航系统的反应。

5. 确保导航指示清晰可见，并且语音导航功能正常工作。

六、附加功能设置某些车载导航仪可能具有其他附加功能，如蓝牙连接、音频播放等。

这些功能的设置方式与导航功能类似，可以根据用户手册进行适当的配置和调试。

七、安全注意事项1. 在驾驶过程中使用导航功能时，请将视线集中在道路上，并合理使用语音导航提示。

2. 如果导航指示与道路情况不一致，应以实际情况为准，遵守交通规则。

3. 导航仪主机应安装在不会妨碍驾驶视线的位置，并且不会影响驾驶操控。

4. 定期检查和维护导航仪系统，包括更新地图、软件升级等。

八、安装维护对于车载导航仪的安装和维护，建议遵循以下原则：1. 如果需要更换车辆或重新安装导航仪，务必仔细拆卸和安装，确保每个步骤的正确性。

智能后视镜说明书警告驾驶者不得在行驶中操作本产品！由于驾驶者在驾驶时违规操作而造成的一切后果，均与本公司无关！驾驶者严禁在加油站使用本产品，包含收音/蓝牙/影像等应用操作！非合法授权资质工程师进行本机的安装、拆卸以及自行拆开主机而造成的任何后果，本公司均不承担任何责任！目录注意事项 ........................................................................................................................... 1；2一、产品概览 (3)(一)基本功能 (3)(二)硬件接口、按键 (3)(三)快速指南 (4)二、行车录影（DVR） (6)三、导航 (8)四、蓝牙电话 (9)五、调频（FM）发射 (10)六、多媒体娱乐 (10)七、语音指令 (11)八、设置 (12)九、远程记录仪 (14)十、安装说明 (17)注意事项1，GPS要在户外才能正常接收到卫星信号并用于导航，在开阔地带，系统正常运行时，通常约1分钟左右可以搜星并定位。

2，当本产品位于建筑物内、隧道或周围有高大阻挡物时，会影响GPS卫星信号接收，此时系统将暂时无法给您提供定位及导航。

一般至少要接收到4颗卫星的信号，才能完成GPS定位，天气不佳或有密集的障碍物（树林或建筑物林立之处）都可能影响卫星信号的接收。

3，由于交通建设的发展，可能出现导航电子地图数据与实际交通指示不完全一致的情况，请您务必遵照道路现状、现地标志等交通规则行驶。

我们不建议您在汽车驾驶过程中查看或操作导航仪。

由于使用导致的交通意外及造成的各种损失，本公司不承担任何责任。

4，禁止使与本产品不匹配的电源，禁止用力弯曲或用重物挤压电源线，以免引起发热造成火灾5，因软件升级，导致某些界面和功能与说明书有差异，恕不另行通知6，本手册已经过仔细核对，但不排除有少量文字错误的可能性，如发现，请联系本公司7，本手册中的图片仅供参考，请以实物为准。

LR9553DLEADTEK GPS BLUETOOTHDATA LOGGERRECEIVERLR9553DSpecifications SheetALL INFORMATION CONTAINED HEREIN IS THE SOLE PROPERTY OF LEADTEK RESEARCH AND CANNOT BE DISSEMINATED WITHOUT THE EXPRESS WRITTEN CONSENT OF LEADTEK RESEARCH.LR9553D Specifications Sheet Rev. 0.2 IntroductionThe Leadtek LR9553D, based on cutting edge SiRFStar III technology, is a high performance, low power, 20-channel GPS data logger and receiver with wireless capability. As such it is a highly compatible Bluetooth solution with extraordinary configurability and sensitivity. Its battery life-of most concern to customers- has also been greatly improved thanks to the SiRFStar III LP (Low Power) chipset’s outstanding power saving capability in providing fast time-to-first-fix. Not to forget its appealing ergonomics—slim, compact and lightweight. The innovative switch-mode design not only makes for easy activation but also enables more power saving when LR9553D is used as a pure data logger which records your tracking data from the received GPS signals. It provides users enough space to store their tracking data including the altitude, GPS position, date and time- up to 240 hrs in the continuous mode. It is not necessary to export the data until the memory is full. LR9553D also comes equipped with mini USB interface both for easy charging and for users to be able to export their recorded points to Google earth and Google Maps without a hitch.Hardware and Software•Based on the high performance features of the SiRFStar III LP chipset •Compliant with Bluetooth v1.2, class 2•Serial Port Profile (SPP) supported•Built-in Ceramic Patch Antenna•Rechargeable Li-ion battery•Operation time: 12 hours, in continuous mode•Three LEDs to display the status of Bluetooth, GPS and power•Data logger function, provides users the tracking data including the altitude, position, date and time (NMEA Format)© 2007 Leadtek Research Inc. All rights reserved. Page 2/10LR9553D Specifications Sheet Rev. 0.2Performance•Cold/Warm/Hot Start Time: 42/35/1 sec.•Reacquisition Time: 0.1 second.•RF Metal Shield for best performance in noisy environments.•Multi-path Mitigation Hardware.Interface•USB-RDD for GPS communications interface•Protocol: NMEA-0183/SiRF Binary (Default NMEA).•Baud Rate: Default 38400 bps.© 2007 Leadtek Research Inc. All rights reserved. Page 3/10© 2007 Leadtek Research Inc. All rights reserved.Page 4/10LR9553D Specifications Sheet Rev. 0.2SpecificationsTechnical PerformanceFeatureItemDescriptionChipset GSW3 SiRFStarIII LP technology Frequency L1, 1575.42 MHz C/A code 1.023 MHz chip rate GeneralChannels2010 meters, 2-D RMS5 meters 2-D RMS, WAAS corrected Position<5meters, 2-D RMS, DGPS correctedVelocity 0.1 meters/secondAccuracy Time1 microsecond synchronized to GPS time DatumDefault WGS-84 Reacquisition 0.1 sec., averageHot start 1 sec., average typical TTFF Warm start 35 sec., average typical TTFF Time to First Fix (TTFF) (Open Sky & Stationary Requirements) Cold start42 sec., average typical TTFF Switch mode ON/OFF; Navi & Log; Log only Flash Memory 4MBRecording Interval Every 15 sec. (User can configure settings) Waypoints 60,000 points (Position, Date, Time & Altitude)Data LogDuration240 hrs (continuous usage) Altitude 18,000 meters (60,000 feet) max. Velocity 515 meters/second (1000 knots) max. Dynamic Conditions Acceleration 4g, max.Main power input 5±5%(10%)V DC inputPowerPower consumption ≈300 mW (continuous mode)LR9553D Specifications Sheet Rev. 0.2 InterfaceInterface SpecificationsItems DescriptionPower Recharge Mini-USB connectorBluetoothFrequency 2.4GHz ISM BandCompliant Bluetooth Specification v 1.2Compliant Profile Series Port Profile (SPP)Bluetooth Operation Range 10 MElectricalMain power input 5±5%(10%)V DC inputPower consumption ***********(FullPower)Backup Power 1.5±10%V DC inputOperation Time 12 hours (750mAh Li-Ion battery)© 2007 Leadtek Research Inc. All rights reserved. Page 5/10LR9553D Specifications Sheet Rev. 0.2Battery ElectricalBattery Cell Li-ion (750mA)Output Voltage 3.2V~4.2V ±0.025VLEDLED 1 (GPS)-GreenState Always on Quick blinking Slowly blinking Description Memory full to stop 3D fixed GPS signal acquisition LED 2 (Bluetooth)-BlueState Quick blinking Slowly blinking NoDescription BT on, but not connected yet BT connected BT offLED 3 (Power)-RedState Always on Quick blinking NoDescription Battery is charging Low power Battery is fully charged Environmental CharacteristicsItems DescriptionOperating temperature range -10 deg. C to +50deg. CStorage temperature range -20 deg. C to +65 deg. C© 2007 Leadtek Research Inc. All rights reserved. Page 6/10LR9553D Specifications Sheet Rev. 0.2 Physical CharacteristicsItems DescriptionLength 60.2 mm (2.37 in)Width 33.0 mm (1.30 in)Height 17.8 mm (0.70 in)Weight 48 g (including rechargeable battery)© 2007 Leadtek Research Inc. All rights reserved. Page 7/10LR9553D Specifications Sheet Rev. 0.2 Block Diagram© 2007 Leadtek Research Inc. All rights reserved. Page 8/10LR9553D Specifications Sheet Rev. 0.2 Photo Image© 2007 Leadtek Research Inc. All rights reserved. Page 9/10© 2007 Leadtek Research Inc. All rights reserved.Page 10/10Preliminary Confidential - Information is subject to change without prior notice.LR9553D Specifications Sheet Rev. 0.2Packing listCD-ROM USB Cable Car ChargerNeck eyelet strap Quick GuideLR9553D。

GPS导航仪使用说明书目录声明 (1)注意事项 (1)第一章配件及使用说明书信息 (2)1.1 产品包装 (2)1.2 说明书的使用 (2)第二章外观组件及基本使用说明 (3)2.1 产品外观 (3)2.2 基本使用 (3)2.3 导航仪供电、充电 (4)2.4 开机主界面及主要功能介绍 (8)第三章导航操作使用说明 (8)第四章媒体播放器使用说明 (8)4.1 MP3播放器 (8)4.2 视频播放器 (9)4.3 图片浏览器 (10)4.4 常用工具 (10)4.5 系统设置 (11)声明欢迎使用本公司GPS导航仪（以下简称导航仪）！本导航仪以GPS导航功能为主，支持音频播放、视频播放、图片浏览、电子书阅读等功能，是您出行休闲的好伴侣。

本导航仪采用当前最流行的ARM920T 内核的三星处理器，低功耗，性能优越。

人性化的用户界面，让您可以轻松操控。

请先仔细阅读本《使用说明书》的操作说明与注意事项，并只使用原厂提供的配件，以免造成无法预期的损坏。

如果您未依照正确的程序使用本导航仪或连接不兼容的配件，此行为将导致保修自动失效，甚至可能危害您及他人的安全，对此，本公司不承担任何责任。

由于交通建设的发展，可能出现导航电子地图数据与实际交通指示不完全一样的情况，请您务必遵照道路现状、实地标志等交通规则行驶。

在汽车行驶过程中查看或操作导航仪，可能会导致严重的交通事故，由于使用导致的交通意外及造成的各种损失，本公司不承担任何责任。

本说明书中的图片仅供参考，请以实物为准。

本《使用说明书》仅适用于本导航仪产品。

我公司保留对此《使用说明书》的最终解释权。

请用户将重要资料进行备份，因资料遗失所造成的损失，本公司不承担任何责任。

注意事项∙首次定位请在空旷处进行。

∙切勿在驾驶的同时对导航系统进行操作，保证行车安全。

∙不要自行拆卸设备。

设备有故障，请送与有资格的维修人员进行修理。

∙在以下情况下，不要直接关闭电源：正在导航、播放电影、音乐和图片。

Table of ContentsIntroduction (2)Important Safety Information (3)System Controls (4)Screen (4)MENU button (5)MAP/GUIDE button (5)A/C button (5)CANCEL button (5)ZOOM button (5)SETUP icon (5)JOYSTICK (5)System Start-up (6)Main Menu (7)Address (7)Intersection (7)Phone No. (POI) (7)Places (7)Map Imput (7)Personal Addresses (8)Previous Destination (8)Today's Destinations (8)Selecting By Address (9)Change State (9)Selecting the City (11)Selecting the Street Address...... 13Selecting By Intersection. (15)Change State (15)Selecting the City (16)Selecting the Street (18)Selecting By Phone No. (POI) (21)Selecting By Places (22)Name (22)Category (25)Place Name (27)Sort by Distance to Travel (28)a City Vicinity (29)Selecting by Previous Destination.. 32Selecting By Map Input (33)Current Position (33)A City (34)State (36)Continental USA (38)Selecting By Today'sDestinations (39)Adding Destinations To The List (39)Selecting Destinations From theList (40)Editing the List (41)Traveling To Your Destination (42)The Map Screen (46)Save Current Location (47)Landmark Icons (49)Going Off the Route (49)Modifying the Route (50)Personal Addresses (52)Entering a PIN (52)Entering Personal Addresses (53)Updating a Personal Address (57)Selecting a Personal Address Asa Destination (58)System Setup (60)Bright (60)Volume (60)Display (60)Reroute (61)Address (61)Location Correction (62)Personal PIN (63)Clock (63)Information (64)Show Icon on Map (64)System Security (65)System Limitations (66)Customer Assistance (68)DVD Removal (69)Map Coverage (70)Climate Control System (76)Navigation SystemUse these links (and links throughout this manual) to navigate through this reference.For a printed owner's manual, click on authorized manuals or go to .Refer to2000 TL Owner's Manual for more information.User AgreementAlpha Index。