推拉自锁连接器F型_CN305356046S

塑料自锁推拉连接器概述该系列连接器广泛应用于电子、仪器、仪表、医疗设备的连接，产品的特点是：连接分离简便快捷--------推拉式连接分离连接可靠----------------具有自锁装置耐环境------------------全塑料外壳防误插------------------具有键位变更设计小型化------------------结构紧凑端接形式多样------------焊接型、压接型、PCB型产品技术参数01#壳体触点型(表1)序号壳体号01绝缘体孔位排列性能指标02 03 04 05 06 07 08 09 10 141 接触件直径mm Ø1.3 Ø1.3 Ø0.9 Ø0.9 Ø0.7 Ø0.7 Ø0.7 Ø0.5 Ø0.5 Ø0.52 焊接杯直径mm Ø1.1 Ø1.1 Ø0.85 Ø0.85 Ø0.6 Ø0.6 Ø0.6 Ø0.45 Ø0.45 Ø0.453 压接杯直径mm Ø0.9 Ø0.9 Ø0.7 Ø0.7 Ø0.6 Ø0.6 Ø0.6 / / /4 额定电流A 10 A 9 A 8 A 7 A 6 A5 A 5 A 3 A 3 A 2 A5 测试电压KV/AC 1.2 1.2 1.2 1.05 1.05 1.05 1.05 0.85 0.85 0.66 测试电压KV/DC 1.8 1.8 1.8 1.5 1.5 1.5 1.5 1.2 1.2 0.97 工作电压KV/AC 0.4 0.4 0.4 0.35 0.35 0.35 0.35 0.29 0.29 0.28 工作电压KV/DC 0.6 0.6 0.6 0.5 0.5 0.5 0.5 0.4 0.4 0.39 接触电阻mΩ＜3.5 ＜4.5 ＜4.5 ＜4.5 ＜6.5 ＜6.5 ＜6.5 ＜8.5 ＜8.5 ＜8.510 绝缘电阻MΩ＞10^6 MΩ11 耐压电压KV/DC 5.5KV/DC12 工作温度°C -50°C~+125°C13 机械寿命次≥5000[1000(连续)]次防水型插头装焊接插孔和焊接插针 (PTA1-K/Z)防水型浮动插座装插孔和插针 (PZB1/B2-K/Z)产品示意图备注防水浮动型(安装密封圈,尾部可带护套)键位角度键位示意图键位代号NCDEFG电缆夹类型壳体号 规格 适用电缆外径尺寸范围0139 2.7~3.9mm 52 4.0~5.2mm 655.3~6.5mm螺帽颜色：黑色 蓝色 灰色 红色 黄色 绿色颜色代码： H B G R Y L护套颜色：黑色 蓝色 灰色 红色 黄色 绿色 白色 棕色 橙色产品示意图备注防水型(安装密封圈,尾部可带护套))。

推拉自锁连接器有哪些作用？什么是推拉自锁连接器？推拉自锁连接器是一种高效连接器，通常用于汽车、家庭电器、通信设备等领域。

该连接器采用特殊的槽口设计，可以通过推拉的方式实现连接，同时自动锁定，从而提高连接速度和可靠性。

推拉自锁连接器的作用1. 加快装配速度推拉自锁连接器可以快速完成连接，从而提高装配速度。

传统的连接器需要使用螺钉或插针等结构进行连接，需要较长的时间来完成连接。

而推拉自锁连接器可以快速完成连接，通常只需要将连接器推送到插件中即可完成连接。

2. 提高连接可靠性推拉自锁连接器具有很高的连接可靠性。

该连接器采用特殊的槽口设计，可以确保连接的紧密度和稳定性，从而提高连接的可靠性。

同时，在连接器完成连接后，会自动锁定，避免连接器在使用过程中出现松动或失效。

3. 缩小连接器尺寸推拉自锁连接器可以帮助缩小连接器的尺寸。

传统的连接器需要使用插针等结构进行连接，因此需要较大的连接器尺寸。

而推拉自锁连接器可以通过特殊的槽口设计，实现较小的连接器尺寸，并且不影响连接的可靠性和效果。

4. 适应各种应用场景推拉自锁连接器可以适应各种应用场景。

该连接器可以广泛应用于汽车、家庭电器、通信设备等领域，并且可以适应各种工作环境，例如高温、低温、湿度等环境。

推拉自锁连接器的优点1.快速连接：推拉自锁连接器可以快速完成连接，从而提高生产效率。

2.自动锁定：连接器完成连接后会自动锁定，避免连接松动或失效。

3.可靠性：推拉自锁连接器采用特殊的槽口设计，确保连接的紧密度和稳定性，从而提高连接的可靠性。

4.节省空间：推拉自锁连接器可以帮助缩小连接器的尺寸，节省设备空间。

推拉自锁连接器的应用场景1. 汽车领域推拉自锁连接器在汽车领域应用广泛，例如发动机控制单元、ABS系统、车身控制系统等领域。

2. 家电领域推拉自锁连接器在家电领域也有广泛应用，例如电视机、电冰箱、空调等领域。

3. 通信设备领域推拉自锁连接器在通信设备领域也有广泛应用，例如路由器、交换机、网络设备等领域。

ASK A 3M EXPERTApril, 20143M™ Hook Fastener SJ3526NProduct Description3M™ Hook and Loop Fasteners o er advanced closure alternatives to zippers, screws, snaps, hooks andmore. They o er greater design exibility, faster product assembly, smoother and cleaner exterior surfacesand improved product performance in many applications. 3M hook and loop fasteners consist of hooks andloops which engage to form a quick fastening attachment. Simply pull the strips apart by hand to disengage.Product FeaturesThe woven nylon hook has exible, self-supporting inverted j-hooks protruding up from the backing withapproximately 300 hooks per square inch (46 hooks/square cm). The woven nylon loop has thousands of soft,pliable napped loops protruding above the backing, providing for thousands of openings and closings (cycles).Both the hook and loop are preshrunk to insure maximum dimensional stability and atness. Standard colorsavailable are black, white and beige, with several custom colors available with extended delivery times andadditional costs.SJ3526N hook is coated on the backside with a high performance rubber based pressure sensitive adhesivewhich allow for easy and convenient attachment to a variety of substrates, including low surface energyplastics.Commonly paired with 3M™ Loop Fastener SJ3527N, this hook fastener can also engage with other 3M™Loop Fasteners.Technical Information NoteThe following technical information and data should be considered representative or typical only and should not be used for speci cation purposes. Typical Physical PropertiesThickness Test Condition2.4 mm91 mil Unmated without liner0.33 mm140 mil Mated without linerProperty: Thicknessnotes: Using 1/2" pressure foot with 34 gram weightProperty ValuesMaterial Hook- Woven NylonBacking High Performance rubber based PSALiner Polyethylene with red printingLiner Thickness0.08 mm 3 milLiner Color WhiteWeight0.062 g/cm²0.014 oz/in²Typical Performance CharacteristicsProperty Values Substrate NotesDynamic Tensile7.6 N/cm²11 lb/in²Nylon Hook to NylonLoopRun at 12 inches per minuteDynamic Shear15.2 N/cm²22 lb/in²Nylon Hook to NylonLoopRun at 12 inches per minuteCleavage Strength13.1 g/cm width7.5 lb/in width Nylon Hook to NylonLoopT-Peel Adhesion 3.5 g/cm width 2 lb/in width Nylon Hook to NylonLoopRun at 12 inches per minute90° Peel Adhesion 3.9 g/cm width 2.2 lb/in width Nylon Hook to NylonLoopRun at 12 inches per minuteCycle Life5000Nylon Hook to NylonLoop Number of closures before losing 50% of original strengthTypical Performance Characteristics (continued)Product Performance:Additional Informationnotes: This guide should assist you in determining which product will adhere best to your substrate for.Handling/Application InformationDirections for UseAttachment TechniquesThe following information is intended to assist the designer considering the use of 3M hook and loop fasteners. System product performance depends upon a number of factors, including the fastener (material, adhesive and area), application method, surface characteristics (material, texture and cleanliness), environmental conditions (moisture, ultraviolet and temperature exposure) and the time it is expected to support a given load. Because many of these factors are uniquely within the user’s knowledge and control, it is required that the user evaluate 3M products to determine whether they are t for a particular purpose and are suitable for the user’s substrates, method of application and desired end use.Rounding the corners, slightly recessing the product into the substrate, or providing raised edges around the Reclosable fastener can reduce the possibility of edge lifting and improve the overall appearance of the fastener on the nished product. Mechanically securing the corners of the fastener with rivets, staples, screws, etc. may also reduce the possibility of edge lifting, but may reduce the closure performance.The two most common techniques for attaching these 3M hook and loop fasteners to various surfaces are summarized below.Pressure Sensitive Adhesive Attachment: The use of pressure sensitive adhesives eliminates or reduces the need for sewing, solvent activation, dielectric or ultrasonic bonding or bulk adhesive bonding. This can result in simplicity, improved safety and lower installation costs. Pressure sensitive adhesive products can be applied manually or automatically using a variety of equipment choices. Contact your 3M Sales Representative to discuss automated equipment options.Surface Preparation: Highly textured surfaces may reduce the ultimate adhesion levels and care should be given to minimize the surface texture or roughness. Adhesive backed fasteners should be applied to surfaces that are clean, dry and free of oil, grease, dust, mold release agents or surface contaminants that could reduce the adhesion. It is recommended to remove any surface contaminants that may reduce adhesion by using a method suited for the type and quantity of surface contaminants present. Isopropal alcohol is a good general use solvent for cleaning contaminants from surfaces for example.In exceptional cases, especially when removing silicone mold release agents or on rough, porous surfaces, it may be necessary to lightly abrade the surface, use an adhesion promoter, or surface sealer to optimize the adhesive bond to the substrate. The selection of abrasion, priming or sealing methods will depend upon the substrates and the environmental conditions the product will be exposed to during use.Attachment Procedure: To obtain optimum bond to any surface, both the fasteners and the target surfaces should have equilibrated for a minimum of one hour at temperatures between 68°F (20°C) to 100°F (38°C) before application. The liner protecting the adhesive is removed and preferably without touching the adhesive, the fastener is applied to the substrate. Exposure of the adhesive to ambient conditions without the protective liner, before applying to the surface, should be minimized as initial adhesive tack may decrease. Flexible materials should be lying on a hard at surface so as to permit uniform adhesive contact with the surface. Use of a rubber hand roller, press platen or similar device is recommended to ensure full adhesive contact or wet- out with the substrate surface. Approximately 4.5 pounds of force per square inch, (310 grams per square centimeter) is recommended to increase adhesive contact, improving bond strength. For all adhesive applications, it is important to ensure that the edges are rolled down to reduce the chance of edge lifting.Plain backedThe plain backed 3M hook and loop fasteners are most commonly sewn into their applications. Liquid or hot melt adhesives and staples are other forms of attachment that can be utilized.Sewing: Although the selvedge edge was initially developed for stitching on, customers often nd that they get better anchorage when stitching through the 3M hook and loop portions of the fastener – this may be application dependant. The type of thread and stitch type is also best determined based on individual application, however, the fastener should be stitched on all edges for the best seam strength. Typically, special machine adjustmentsare not necessary when using our 3M hook and loop fastenersStorage and Shelf LifeShelf Life when stored in original packaging at 72°F (22°C) and 50% RH is 18 months.Family GroupReferencesISO Statement Technical Information SJ3401SJ3522SJ3523SJ3526N SJ3527N SJ3402SJ3531SJ3571SJ3572SJ3532N SJ3533N SJ3530Thickness (mm)Test Condition: Unmatedwithout liner2 2.4 3.2 2.4 3.22 3.2 3.2 2.4 2.03 3.05 2.4Thickness (mm)Test Condition: Matedwithout liner3.10.330.330.330.33 3.10.330.330.33 3.3 3.30.33Material Loop-WovenNylon Hook-WovenNylonLoop-WovenNylonHook-WovenNylonLoop-WovenNylonHook-WovenNylonLoop-WovenNylonLoop-WovenNylonHook-WovenNylonHook-WovenNylonLoop-WovenNylonHook-WovenNylonBacking NoAdhesive Sewon Plasticizerresistant acrylicPSAPlasticizerresistant acrylicPSAHighPerformance rubberbased PSAHighPerformance rubberbased PSANoAdhesiveSewonGeneralPurposerubberbasedPSAHighPerformanceAcrylicPSAHighPerformanceAcrylicPSARubberbased PSARubberbased PSAGeneralPurposerubberbasedPSALiner None Nonprintedpolyolen lm Nonprintedpolyolen lmPolyethylene withredprintingPolyethylene withredprintingNone PolypropylenePolyolen withembossed 3MlogoPolyolen withembossed 3MlogoWhitePolypropyleneWhitePolypropylenePolypropyleneLiner Thickness (mm)0.0890.0890.080.080.080.10.10.080.080.08Liner Color Clear Clear White White White Clear Clear White1. Product PageUrl: https:///3M/en_US/company-us/all-3m-products/~/3M-Hook-Fastener-SJ3526N?N=5002385+3293241231&rt=rud2. Safety Data SheetUrl: https:///3M/en_US/company-us/SDS-search/results/?gsaAction=msdsSRA&msdsLocale=en_US&co=ptn&q=SJ3526NThis Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001: 2000 and ISO/TS 16949:2002 standards.The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed.Product UseWarranty, Limited Remedy, and Disclaimer Limitation of LiabilityIndustrial Adhesives and Tapes Division 3M CenterSt. Paul, MN 55144-1000800-362-3550 Please recycle.© 3M 2018. All Rights Reserved.The brands listed above are trademarks of 3M.Many factors beyond 3M’s control and uniquely within user’s knowledge and control can a ect the use and performance of a 3M product in a particular application. Given the variety of factors that can a ect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is t for a particular purpose and suitable for user’s method of application.Unless an additional warranty is speci cally stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product speci cation at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.。

推拉自锁连接器结构推拉自锁连接器是一种常见的电子连接器，广泛应用于电子设备、通信设备、汽车电子等领域。

它具有结构简单、连接可靠、使用便捷等特点，被广泛认可和采用。

推拉自锁连接器的结构主要包括外壳、插针、插座和锁定装置。

外壳是连接器的外部保护结构，通常由耐热、阻燃性能好的工程塑料制成，具有良好的机械强度和耐腐蚀性。

插针和插座是连接器的核心部件，负责传递电信号和电能。

插针和插座通常由金属材料制成，如铜、铝等，具有良好的导电性能和机械强度。

推拉自锁连接器的插针和插座的结构设计非常关键。

插针通常采用圆柱形状，有多个插针排列在一起，形成插针组。

插座则相应地设计了与插针组相匹配的插座孔，使得插针能够准确地插入插座孔中。

插座孔的内部通常采用弹簧结构，可以保证插针与插座孔之间的紧密接触，从而实现良好的电气连接。

在插针和插座之间还设置了导向结构，使得插针能够准确地插入插座孔中，避免插针与插座孔错位或损坏。

推拉自锁连接器的锁定装置起到固定插针和插座的作用，防止连接器在使用过程中意外脱落。

锁定装置通常由外壳上的凸轮和插座上的凹槽组成。

当插针插入插座孔时，凸轮会与凹槽相结合，形成一种锁定机制，使得插针和插座能够紧密连接在一起，不易松动。

在需要拆卸连接器时，只需推动外壳上的推杆，凸轮与凹槽分离，即可解锁并拆卸连接器。

推拉自锁连接器的使用非常方便。

当需要连接电子设备时，只需将插针插入插座孔中，然后推动外壳上的推杆，即可完成连接。

而在需要拆卸连接器时，只需推动外壳上的推杆，即可解锁并拆卸连接器，非常简单快捷。

推拉自锁连接器具有结构简单、连接可靠、使用便捷等优点，被广泛应用于电子设备、通信设备、汽车电子等领域。

它的结构包括外壳、插针、插座和锁定装置，其中插针和插座的设计非常关键。

推拉自锁连接器的使用非常方便，只需插入插座孔并推动外壳上的推杆即可完成连接，拆卸时同样简单快捷。

推拉自锁连接器的应用为电子设备的连接提供了方便和可靠的解决方案。

专利名称：一种棘轮推拉自锁电连接器
专利类型：实用新型专利
发明人：余睿,刘向阳,吴旭娇,沈靖舒,高兰,陈松,方莲,肖雨辰,黄婉秋,郭安迪,张晓阳
申请号：CN202022426198.3
申请日：20201028
公开号：CN213242993U
公开日：
20210518
专利内容由知识产权出版社提供
摘要：本实用新型公开了一种棘轮推拉自锁电连接器，包括插头组件和插座组件，插头壳体套装有锁紧环，锁紧环上活动安装有棘轮，头壳体外侧壁安装有定位块，头壳体后端外侧壁上固定有定位套，定位套外部、锁紧环外部套装有推拉环，推拉环的推拉齿轮开有定位块配合槽，棘轮具有连续的四个棘齿，插座组件包括座壳体和针绝缘体，座壳体内侧壁上设有长条约束块，座壳体内侧壁上还设有锁紧底板，长条约束块端部与锁紧底板之间具有锁紧间隙，锁紧环前端具有外翻圆台阶板，外翻圆台阶板开设有约束边。

本实用新型结合插头与插座插接位置关系、推拉环推动棘轮位置关系共同实现锁紧和解锁操作，实现了推拉式、直插拔操作自锁目的，具有寿命高、性能可靠等优点。

申请人：成都宏明电子股份有限公司
地址：610000 四川省成都市二环路东二段29号
国籍：CN
代理机构：成都华辰智合知识产权代理有限公司
代理人：秦华云
更多信息请下载全文后查看。

(19)中华人民共和国国家知识产权局(12)发明专利申请(10)申请公布号 (43)申请公布日 (21)申请号 201910211737.0(22)申请日 2019.03.20(71)申请人 苏州伟聚电子科技有限公司地址 215000 江苏省苏州市吴江经济开发区燕浜路199号(72)发明人 唐晓勇　梅万春　(74)专利代理机构 苏州翔远专利代理事务所(普通合伙) 32251代理人 刘计成(51)Int.Cl.H01R 13/46(2006.01)H01R 13/627(2006.01)H01R 13/629(2006.01)H01R 24/00(2011.01)(54)发明名称一种带锁扣的TYPE-C连接器(57)摘要一种带锁扣的TYPE -C连接器，包括TYPE -C母端本体和TYPE -C公端本体；TYPE -C母端本体上设置有TYPE -C母端连接器和TYPE -C母端卡扣，TYPE -C母端连接器嵌入TYPE -C母端本体的侧面设置，TYPE -C母端卡扣设置在TYPE -C母端本体的上端面；TYPE -C公端本体上设置有TYPE -C公端连接器和TYPE -C公端锁扣，TYPE -C公端连接器凸出设置在TYPE -C公端本体的侧面，TYPE -C公端锁扣设置在TYPE -C公端本体的上端；TYPE -C公端连接器与TYPE -C母端连接器连接，TYPE -C母端卡扣与TYPE -C公端锁扣连接。

本发明设计的带锁扣的连接器，解决了TYPE -C连接器在车载应用时线端振松以及脱落的问题，采用锁扣结构防止TYPE -C对配端因为振动而后退，达到传输信号稳定的目的，连接可靠，传输信号稳定，模具标准化程度高，成本低。

权利要求书1页 说明书3页 附图4页CN 109904661 A 2019.06.18C N 109904661A权　利　要　求　书1/1页CN 109904661 A1.一种带锁扣的TYPE-C连接器，其特征在于：包括TYPE-C母端本体和TYPE-C公端本体；所述TYPE-C母端本体上设置有TYPE-C母端连接器和TYPE-C母端卡扣，所述TYPE-C母端连接器嵌入所述TYPE-C母端本体的侧面设置，所述TYPE-C母端卡扣设置在所述TYPE-C母端本体的上端面；所述TYPE-C公端本体上设置有TYPE-C公端连接器和TYPE-C公端锁扣，所述TYPE-C公端连接器凸出设置在所述TYPE-C公端本体的侧面，所述TYPE-C公端锁扣设置在所述TYPE-C公端本体的上端；所述TYPE-C公端连接器与所述TYPE-C母端连接器连接，所述TYPE-C母端卡扣与所述TYPE-C公端锁扣连接。

C 05系列工业级推拉式快锁圆形连接器产品简介C05系列圆形连接器插头座对接采用推拉式锁紧方式，操作便捷，安全可靠，能适应各种振动冲击环境，插头尾端采用屏蔽式尾部附件。

C05系列圆形连接器目前为16#壳体，有2+2和3+2两种接触件排列方式，接触件规格分别为20#和3mm，接触件尾端为压线式。

C05系列圆形连接器3mm接触件采用线簧孔接触结构，可承载40A电流，插拔力低，接触可靠性高，耐插拔。

C05系列圆形连接器壳体目前可提供五种键位防错插，也可提供插头装插针、插头装插孔、插座装插针或插座装插孔，为客户提供灵活的应用选择。

产品特点◆插头和插座为推拉式快速锁紧结构◆产品壳体为16#，具有五种键位防错插◆产品外壳采用铝合金喷沙镀化学镍，耐环境能力强◆电源接触件采用线簧孔结构，插拔力低，接触可靠性高，耐插拔◆接触件排列有2（3mm）+2（20#）和3（3mm）+2（20#）两种形式，插头座分别有装针或装孔两种形式◆连接器防护等级最高可达IP67◆插头接触件尾端为压接导线方式，20#接触件可适应0.5–1mm2线规，3mm接触件可适应2.5–6mm2线规◆除本手册中列出的产品规格外，可按客户实际需求定制产品主要技术参数◆机械性能-壳体：铝合金-镀层：喷砂化学镀镍、铝合金阳极化发黑-绝缘体：玻纤增强热塑性塑料-接触件：铜合金镀金或镀银-正弦振动：10 ～2000Hz，加速度147m/s2-冲击：加速度980m/s2-机械寿命：1000次插拔接触件代号插针配合直径（mm）电流（A）接触电阻（mΩ）适配导线规格（mm 2）20#Ø1.027.5200.5/1.0Ø3.0231 4.0Ø3.04016.0◆电气性能-接触件额定电流及接触电阻C 05系列工业级推拉式快锁圆形连接器工作电压400V AC/690V DC耐电压3000V AC-额定工作电压及耐电压（交流有效值）-绝缘电阻：2000MΩ◆环境性能-工作温度：-55 ℃～+125 ℃-相对湿度：温度40±2 ℃时，为90%～95%-防护等级：IP67-温度冲击：-55 ℃ ～+105 ℃，20个循环-盐雾：96h型号命名C05TW16J 04Y DN ①②③④⑤⑥⑦⑧①主称代号②连接器类型：T –插头，Z –插座③键位：X、Y、Z、W、N（N键位不标识）④壳体号：16⑤接触件类型：J –插针，K –插孔⑥接触件数量：04，05⑦接触件端接形式：Y –压接导线⑧镀层：DN –铝合金喷沙镀化学半光亮镍C 05系列工业级推拉式快锁圆形连接器键位号插头插座X：270°Y：315°Z：90°W：45°N：标准防错插键位产品有X、Y、Z、W 、N（N为标准键位）五种键位，实现防错插C 05系列工业级推拉式快锁圆形连接器插头孔位排列及外形尺寸C05T16J05YDNC05T16K05YDNC05T16J04YDNC05T16K04YDNC 05系列工业级推拉式快锁圆形连接器C05Z16K05YDNC05Z16J05YDNC05Z16K04YDNC05Z16J04YDN方法兰插座孔位排列及外形安装尺寸C 05系列工业级推拉式快锁圆形连接器接触件外形尺寸20#插针合件3mm插针合件20#插孔合件3mm插孔合件。

我司端子对照表
注意：我司常用快速连接端子有250、187端子，无论是旗型或者直型端子，这两种端子都是以匹配的插片宽度尺寸来命名区份的，都是其中:
1. 250匹配的公端宽度为 6.35mm(250mil)，厚度为0.8mm 。

2. 187匹配的公端宽度为 4.75mm(187mil)，厚度为0.8mm 或者0.5mm 。

直型端子：
直型带自锁端子/直型带锁扣端子：
直型公母一体端子：
带绝缘直型端子：
带绝缘公母一体端子：
公插片端子
常用圆盘端子型号有：
梅花地环端子有：
带绝缘圆盘端子：
旗型端子：
带绝缘旗型端子：旗型带自锁端子：
叉型（Y型/U型）端子：
带绝缘（Y型/U型）端子：。

Caution: Before installing in a nuclear application, determine that the fnodurt is intended for such use.Warning: Disconnect power before installing or servicing. DescriptionThese kits arc designed for use on CR305, CR306, CR307, and CR308 magnetic contactors & starters. These kits enable you to combine a control station with a contactor or starter as one compact unit. See Figure 1.CRE305X220N push buttonCR305X230N H-0-A selector switchMounting bracket CR305X230D OFF-ON selector switchFigure 1. Pilot devices and bracketFigure 2. Typical device. Installation1.Remove powerfrom device.2.Remove coverfrom device.Note: On unwiredforms, kits are moreeasily installed by firstremoving contactor orstarter from enclosure.3.Disassemble deviceby pressing on coiland pulling coil re­tainers up and awayfrom coil. See Fig. 2.4.Withdraw spring clip from movable portion of magnetassembly.5.Remove movable magnet and slide out coil and stationarymagnet from arc chute cover.6.Take molded arc chute cover and insert keyed end of mountingbracket into keyed slot at top of the molded cover. See Figure 3.Figure 3. Installation of mounting bracket.7.Reassemble device.8.When the pilot device is to be used on a CR307 or CR308combination starter, remove the white tape from the 2 7/8-in.x I ¾-in. urethane gasket and place it over the front of thepilot device.9.Slide pilot device onto the mounting bracket, using squaremounting holes for CR307 or CR308 and circular mountingslots for CR305 or CR306 as shown in Figure 4.Figure 4. Installation of push button or selector switch.10.Wire pilot device as outlined under each specific kit asshown in Figures 5, 6, or 7 on back page.11.Remove large rectangular knockout from enclosure cover byplacing blade of a screwdriver at the bottom of the knock­out and applying force from the front of the enclosure cover.12.Replace cover on enclosure.13.Adjust pilot device on its mounting bracket to line up withknockout in cover. Tighten pilot device mounting screws.1GEH-4764 INSTALLATION INSTRUCTIONS300-Line Push Button & Selector Switch KitsFor NEMA Size 2300-Line Starters, Contactors, & Combination Starters-Type 1 Enclosure —Installation-Wiring of Pilot Devices CR305X220N Push Button (Fi gu re 5)1. Insert and secure black/red wire of push button under clamp of Terminal 3 at top of auxiliary interlock.2.Insert and secure black wire of push button under the screw of Terminal L1 at top of contactor.3. Insert and secure black/white wire of push button under clamp of Terminal 2 and bottom of auxiliary interlock.TERMINAL2 (NOT SHOWN)Figure 5.CR305X230N H-0-A Selector Switch (Fi gu re 6)1.Remove wire "B" (as shown in figure 7) running from top coil terminal screw to Terminal 3 on auxiliary interlock.Discard wire.2. Insert and secure black/white wire of selector switch under the clamp of Terminal 3 at top of auxiliary interlock.3. Insert and secure black wire of selector switch under top coil terminal screw.4.Insert and secure black/red wire of selector switch under the screw of Tenninal L1 at top of contactor.5. If a maintained contact device is in the circuit, connect it be­tween Terminal LI at top of contactor and Terminal 3 at top of auxiliary interlock.Figure 6.CR305X230D OFF-ON Selector Switch (Fi gu re 7)1.Remove wire "B" running from top coil terminal screw to Terminal 3 on auxiliary interlock. Discard wire.2.Insert and secure black/white wire of selector switch under the screw of Terminal LI at top of contactor.3.Insert and secure black wire of selector switch under top coil terminal screw.�? TERMINAL L1 Wl RE'.'-.,_TOPCOIL TERMINAL SCRE WFigure 7.Connection Diagram-Push ButtonBLACK/REDBLACK WIRE.._ _____ B L A C K/W H I T E _____ -o 2M-LINE CONT A CTORConnection Diagram-H-O-A Selector SwitchBLACK/WHI TEBLACK/REDBLACKOFF M-LINE CONT A CTORConnection Diagram-OFF-ON Selector SwitchOFFM-LINE CONT A CTORCUSTOMER TO REMOVETHIS WIRE IF PRESENT ON STARTER.Above connections are for three-phase enclosed contactors,across-the-line starters, and combination starters.These instructions do not purport to cover all details or variations in equipment nor to provide for every possible contingency to be met in connection with installation, operation, or maintenance. Should further information be desired or should particular problems arise which are not covered sufficiently for the Purchaser's purposes, the matter should be refer­red to the nearest ABB sales office. 2—ABB Inc.305 Gregson Drive Cary, NC 27511.—We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB Inc. does not accept any responsibility whatsoever for potential errors or possible lack of information in this document.We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction or utilization of its contents – in whole or in parts – is forbidden without prior written consent of ABB Inc. Copyright© 2019 ABB All rights reserved1S Q C 912041M 0201 G E H -4764C , F e b r u a r y 2020。

ASK A 3M EXPERTJune, 20143M™ Dual Lock™ Reclosable Fastener SJ3562Product Description3M™ Dual Lock™ Reclosable Fasteners are positive locking, hidden fasteners designed for use in a variety ofattachment solutions. They consist of continuous strips of polyole n stems with a mushroom shaped topprotruding up from the backing. When snapped together the mushroom shaped caps interlock producing astrong reliable Fastener.The standard Dual Lock fasteners are available in three di erent stem densities (170, 250 and 400) referring tothe approximate number of stems per square inch. (26, 39, 62 stems per square centimeter) By inter-lockingdi erent stem density combinations you can create the strength that suits your application; more total stemsgive higher strength. The Dual Lock Reclosable fasteners can be mated in the following combinations ofincreasing closure strength: Type 170 to Type 250, Type 170 to Type 400, Type 250 to Type 250 and Type250 to Type 400. We do not recommend using the Type 170 to 170 because it does not have enough strengthfor a good connection. We do not recommend using the Type 400 to 400 because it is too strong and maycause stems and heads to rip out rendering the fastener no longer reclosable.The Dual Lock Low Pro le has one stem density of approximately 705 stems per square inch and theyinterlock to themselves. The low pro le products are not intended to mate to the standard size Dual Lock.There are a variety of pressure sensitive adhesives available with Dual Lock to cover most application needs.The pressure sensitive adhesive makes the Dual Lock easy to use, simply remove the liner, place the Dual Lockand apply rm consistent pressure to assure good contact with the substrate you are adhering. We also o ernon-adhesive backed Dual Lock for applications where the PSA does not meet your needs.Product Features•Easy Alignment: Dual Lock fasteners engage in any direction or position. The mushroom stems slide intoposition until they are engaged by snapping together applying rm pressure, this eliminates concerns aboutmisalignment or spontaneous engagement.•Positive Locking: Dual Lock fasteners engage/fasten with an audible snap and detectable movement assuringcomplete and secure closure.•Reclosability: Dual Lock fasteners can be opened and closed for multiple closure applications (high cyclelife).•Blind Attachment: Dual Lock fasteners can be attached on the backside of substrate (i.e. trim piece) where itwill not interrupt the show surface.•Rattle-Free: Dual Lock fasteners will not rattle loose.•Ease of Assembly: Dual Lock fasteners can be used to attach components before they enter the nalassembly plant, reducing the number of parts and the assembly time. No tools are required.•Adjustable Strength: By selecting di erent combinations of the various stem densities of the Dual Lock thefastener can be designed to meet the strength needs of the designer.•Product Forms: Dual Lock fasteners come in a variety of forms: Backed with Pressure Sensitive adhesive,Non-woven, Rigid backed, Die Cut Shapes, and low pro le.•Attachment Methods: The wide varieties of Dual Lock fasteners allow a design engineer exibility to be ableuse and attach Dual Lock to just about any substrate or application. Peel and stick pressure sensitive adhesivebacked is quick and easy yet strong and secure. Non-woven backed can be used with a variety of adhesivechoices such as hot melt, liquid, epoxies, sealants, etc. We have parts that can be attached with a screw orrivet; rigid and plain backed for developing your own special device.General InformationPressure Senstive Adhesive backed productProduct Family: Acrylic PSA VHB rm type backing for medium to high surface energy attachmentTechnical Information NoteThe following technical information and data should be considered representative or typical only and should not be used for speci cation purposes.Typical Physical PropertiesProperty Values Dual Lock Color Clear Adhesive Color Clear Thickness3.51 mm 138 mil Engaged to itself or to one of the same family 5.74 mm 226 mil Stems 26 Stems/cm²170 Stems/in²Liner Material Silicone treated Polyole n with Red printing Liner Thickness 0.1 mm 4 mil Liner ColorClearTypical Performance CharacteristicsPropertyValues Temperature Resistance104 °C220 °FDynamic Tensile (Engage)Substrate 9 N/cm²13 lb/in²Type 170 to 25014.5 N/cm²21 lb/in²Type 170 to 40015.2 N/cm²22 lb/in²Type 250 to 25021.4 N/cm²31 lb/in²Type 250 to 40018.5 N/cm²27 lb/in²Low Pro le to Low Pro leProperty: Dynamic Tensile (Engage)Table continued on next pageDynamic Tensile (Disengage)Substrate 18.5 N/cm²27 lb/in²Type 170 to 25029.6 N/cm²43 lb/in²Type 170 to 40029.6 N/cm²43 lb/in²Type 250 to 250Dynamic Tensile (Disengage)Substrate41.4 N/cm²60 lb/in²Type 250 to 400 Property: Dynamic Tensile (Disengage)Dynamic Shear Substrate9.8 N/cm²14 lb/in²Type 170 to 25014.5 N/cm²21 lb/in²Type 170 to 40015 N/cm²22 lb/in²Type 250 to 250 41.3 N/cm²59 lb/in²Type 250 to 400 Property: Dynamic ShearCleavage Strength Substrate21 N/cm width12 lb/in width Type 170 to 250 35 N/cm width20 lb/in width Type 170 to 400 42 N/cm width24 lb/in width Type 250 to 250 56 N/cm width32 lb/in width Type 250 to 400 Property: Cleavage Strengthnotes: Rigid backed from Rigid backedT-Peel Adhesion Substrate1.2 N/cm width0.7 lb/in width Type 170 to 2502.5 N/cm width 1.4 lb/in width Type 170 to 4003.3 N/cm width 1.9 lb/in width Type 250 to 250 2.6 N/cm width 1.5 lb/in width Type 250 to 400Property: T-Peel Adhesionnotes: Flexible from Flexible90° Peel Adhesion Substrate3.2 N/cm width 1.8 lb/in width Type 170 to 250 5.4 N/cm width 3.1 lb/in width Type 170 to 400 8.1 N/cm width4.1 lb/in width Type 250 to 250 8.1 N/cm width 4.6 lb/in width Type 250 to 400Property: 90° Peel Adhesionnotes: Flexible from RigidCycle Life Substrate1000Type 170 to 2501000Type 170 to 4001000Type 250 to 2501000Type 250 to 400Property: Cycle Lifenotes: Number of closures before losing 50% of original strengthNoteThe following technical information and data is intended as a guideline to assist customers in selecting 3M™ Reclosable Fasteners for further evaluation. This technical information is not product release speci cations or standards. Unless stated di erently, the typical system performance and product properties were obtained using speci c test methods under controlled laboratory conditions of 72°F± 5°F and 50% ± 10% relative humidity. The user is responsible for evaluating 3M reclosable fasteners under expected use conditions to ensure suitable performance for the intended application.These are typical values which were gathered from testing the PSA backed materials. Similar values can be expected when the Dual Lock is held securely in a rigid fashion.Tests were run at 12 inches per minuteProduct Performance:Additional Informationnotes: This guide should assist you in determining which product will adhere best to your substrate for.Family GroupReferencesISO StatementTechnical InformationDesign Considerations• As a general rule, four square inches of fastener area per pound of static tensile or shear load to be supported is suggested as a starting point for evaluation. More or less area may be needed depending on speci c conditions or end use applications. Type 250 Dual Lock Reclosable fasteners less than 0.75" (19 mm) width should not be engaged to other type 250 Dual Lock Reclosable fastener as low disengagement values may occur.• Whenever possible design one side of the Dual Lock reclosable fasteners to be larger than the mating side. This will allow for variability or mismatch in Dual lock alignment positions, and ensure 100% fastening area contact. Another approach would be to design two rectangular shaped fastener pieces so that they can be engaged in a cross web/perpendicular pattern (crossed).• Dual Lock strength is proportional to the fastening contact area, and the number of stems in combination used. More stems and more Dual Lock used gives you more strength, less stems combined and using less Dual Lock will give you less strength.• Dual Lock disengagement strength/performance is strongest in direct tensile. Peel/cleavage mode is where it is most easily removed.• Final product performance depends upon a combination of factors: the substrate and its surface characteristics, the fastener selected, the application method and conditions, the time and environmental conditions required for the application. Because these factors are unique to each application, the user must evaluate Dual Lock and do any testing required to determine Dual Lock’s suitability for the user’s desired end use.Storage and Shelf LifeTo obtain best performance, use this product within 24 months from date of manufacture.SJ3560SJ3561SJ3562Thickness (mm) 3.513.513.51Liner MaterialSilicone treated Polyole n with Red printing Silicone treated Polyole n with Red printing Silicone treated Polyole n with Red printing Liner Thickness (mm)0.10.10.1Liner ColorClearClearClear1. Product PageUrl: https:///3M/en_US/company-us/all-3m-products/~/3M-Dual-Lock-Reclosable-Fastener-SJ3562?N=5002385+3293242263&rt=rud 2. Safety Data SheetUrl: https:///3M/en_US/company-us/SDS-search/results/?gsaAction=msdsSRA&msdsLocale=en_US&co=ptn&q=SJ3562This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001 standards.The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed.Product UseWarranty, Limited Remedy, and Disclaimer Limitation of LiabilityIndustrial Adhesives and Tapes Division 3M CenterSt. Paul, MN 55144-1000800-362-3550 Please recycle.© 3M 2018. All Rights Reserved.The brands listed above are trademarks of 3M.Many factors beyond 3M’s control and uniquely within user’s knowledge and control can a ect the use and performance of a 3M product in a particular application. Given the variety of factors that can a ect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is t for a particular purpose and suitable for user’s method of application.Unless an additional warranty is speci cally stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product speci cation at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.。